Best long length drill bits - Buying Guide
Last Updated: 04/25/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
Drill America GLBCOX61/4 1/4" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series
Asin: B00B2R0GVI | Model: GLBCOX61/4 | PartNumber: GLBCOX61/4 | Ean: 0887861045537 | UPC: 887861045537
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
6" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 6 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches | Weight: 0.01 Pounds
See On Amazon #2
BOSCH CO2148 1-Piece 21/64 In. x 4-5/8 In. Cobalt Metal Drill Bit for Drilling Applications in Light-Gauge Metal, High-Carbon Steel, Aluminum and Ally Steel, Cast Iron, Stainless Steel, Titanium
Asin: B000AEQQX6 | Model: CO2148 | PartNumber: CO2148 | Ean: 0000346333602 | UPC: 000346333602
Surface Hardened To Penetrate Tough Abrasive Materials.
Best Used For Drilling Into Light-Gauge Metal, High-Carbon Steel, Aluminum And Ally Steel, Cast Iron, Stainless Steel And Titanium.
Available In Jobber Length, Full Shank.
Rigid, Thick Web Design Adds Stability To Bit In Tough Applications.
Features
- Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)
- Rigid, thick web design adds stability to bit in tough applications
- Surface hardened to penetrate tough abrasive materials
- Available in jobber length, full shank
- Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium
- See more on Amazon...
Brand: BOSCH | Manufacturer: Bosch
Dimensions: 0.00 x 0.00 x 0.00 inches
Warranty: No
See On Amazon #3
Drill America 15/64" x 6" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series
Asin: B00B1C8EDQ | Model: DWDA/CX615/64 | PartNumber: DWDA/CX615/64 | Ean: 0887861043298 | UPC: 887861043298
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to national aerospace standard 907
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #4
HHIP 2000-0071 1/4 x 4 Inch HSS Extra Long Square Tool Bit
Asin: B00N403GIG | Model: 2000-0071 | PartNumber: 2000-0071 | Ean: 0769053004235 | UPC: 769053004235
Extra Long.
Country Of Origin: China.
M2 High Speed Steel A Fine General Purpose Ground Tool Bits Show Exceptional Result On Mild Steel, Alloys And Tool Steels. This Tool Bit Makes A Superior Finishing Tool.
Features
- Size (Inch) SQ x Length 1/4 x 4
- M2 High speed steel A fine general purpose Ground tool bits show exceptional result on mild steel, alloys and tool steels. This tool bit makes a superior finishing tool
- Extra long
- Country of origin: China
- See more on Amazon...
First Available: 11/25/2017
Brand: HHIP | Manufacturer: ABS Import Tools Inc.
Dimensions: 6.00 x 3.00 x 1.00 inches | Weight: 0.05 pounds
See On Amazon #5
Drill America - DWDA/CX63/8 3/8" x 6" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series
Asin: B00B1C8788 | Model: DWDA/CX63/8 | PartNumber: DWDA/CX63/8 | Ean: 0887861043380 | UPC: 887861043380
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to national aerospace standard 907
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #6
HSS Drill Bit Set 3/8 in. x 12 in. Aircraft Extension Extra Long M2 Bright Deep Hole Drill-3Pcs
Asin: B07DS2H5C7 | Model: MCAD3-8-12 | PartNumber: MCAD3-8-12 | Ean: 0784099040573 | UPC: 784099040573
✔️【 Surface Treatment】: The Bright Finished Surface Treatment Strongthen The Hardness Of Drill Bit Body To Ensure The Long Drilling Life And Better Drilling Performance..
✔️【 Application】: Best Used For Drilling Deep Hole In Metal, High-Carbon Steel, Aluminum And Alloy Steel, Cast Iron, Stainless Steel And Titanium.
✔️【Drill Point】 : 135 Deg. Quick-Cutting Points Are Self- Centering And Penetrate Quickly With Less Pressure. Will Not "Walk" Or"Wander"..
✔️【Material】: M2 High Speed Steel Is The Premium Material With High Hardness And Red Hardness To Enable Long Drilling Life And Fast Drilling Performance..
Features
- DRILL BIT DIMENSION :3/8"(Diameter) x 9"( Flute Length) x 12"(Overall Length)
- MATERIAL : M2 High Speed Steel is the premium material with high hardness and red hardness to enable long drilling life and fast drilling performance.
- SURFACE TREATMENT : The bright finished surface treatment strongthen the hardness of drill bit body to ensure the long drilling life and better drilling performance.
- DRILL POINT : 135 deg. quick-cutting points are self- centering and penetrate quickly with less pressure. will not walk orwander.
- APPLICATION : Best used for drilling deep hole in metal, high-carbon steel, aluminum and alloy steel, cast iron, stainless steel and titanium
- See more on Amazon...
Brand: MAX-CRAFT | Manufacturer: MAX-CRAFT
Dimensions: 1.00 x 12.00 x 1.00 inches
See On Amazon #7
Drill Hog USA 11/16" Drill Bit 11/16" Silver & Deming Bit HI-Molybdenum M7
Asin: B074D42DGC | Model: 1116M7SD | PartNumber: 1116M7SD | Ean: 0799209319784 | UPC: 799209319784
135 Degree Split Point Prevents "Walking".
Drill Hog Usa Lifetime Warranty.
Tri-Flat Shank Cut Down To 1/2".
Hi-Molybdenum M7 Hss Steel.
Features
- 11/16" Diameter 6" Overall Length
- HI-Molybdenum M7 HSS Steel
- 135 Degree Split Point Prevents Walking
- Tri-Flat Shank Cut Down to 1/2
- Drill Hog USA Lifetime Warranty
- See more on Amazon...
Brand: Drill Hog | Manufacturer: Drill Hog
See On Amazon #8
Drill America 5 Piece High Speed Steel Aircraft Extension Drill Bit Set (1/4 - 1/2" x 6" Long), POU Series
Asin: B01HBH7MPK | Model: POUA/CX6 | PartNumber: POUA/CX6 | Ean: 0887861241786 | UPC: 887861241786
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Manufactured To National Aerospace Standard 907.
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
High-Speed Steel Tools Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Sizes included are 1/4", 5/16", 3/8", 7/17" and 1/2" with overall length of 6"
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- Manufactured to national aerospace standard 907
- See more on Amazon...
First Available: 03/12/2017
Brand: Drill America | Manufacturer: Drill America
See On Amazon #9
Drill America #40 x 6" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series
Asin: B00B1CAYKW | Model: DWDA/CX640 | PartNumber: DWDA/CX640 | Ean: 0887861042703 | UPC: 887861042703
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to national aerospace standard 907
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #10
Greycore Tools 3/8 Inch x 6 Inch Cobalt Aircraft Extension Bit 2 Pack M35 Cobalt Drill Bit, Industrial Titanium Coating Drill Bits for Steel, Hard Metal, Cast Iron, Wood, Plastic (3/8" x 6")
Asin: B0CW23QS8N | Ean: 0355513803083 | UPC: 355513803083
Heavy-Duty Material: Our Drill Bits For Hardened Steel Feature A Heavy-Duty Construction Made With M35 Cobalt (5% Cobalt) And An Industrial Strength Titanium Coating, Which Provide Excellent Durability And Superior Resistance Against Abrasion And High Heat..
Compatible Materials: Hard Metals, Stainless Steel, Cast Iron, Steel, Titanium Alloy, Hard Plastics, Wood And More, And A Wide Range Of Applications Such As Repair, Construction, Or Woodworking..
Split Point Tip: These Cobalt Drill Bits Feature A 135 Degree Split Point Tip That Prevents Slipping And Can Help Increase Drilling Speed While Ensuring Smooth And Easy Penetration..
These Cobalt Drill Bits Are Designed For Long Lasting Durability And Performance, Ensuring Fast And Easy Penetration Through Many Different Materials..
Features
- Includes: 2 3/8 Inch x 6 Inch Cobalt Drill Bits
- These cobalt drill bits are designed for long lasting durability and performance, ensuring fast and easy penetration through many different materials.
- Heavy-Duty Material: Our drill bits for hardened steel feature a heavy-duty construction made with M35 cobalt (5% cobalt) and an industrial strength titanium coating, which provide excellent durability and superior resistance against abrasion and high heat.
- Split Point Tip: These cobalt drill bits feature a 135 degree split point tip that prevents slipping and can help increase drilling speed while ensuring smooth and easy penetration.
- Compatible Materials: Hard metals, stainless steel, cast iron, steel, titanium alloy, hard plastics, wood and more, and a wide range of applications such as repair, construction, or woodworking.
- See more on Amazon...
Brand: Greycore | Manufacturer: Greycore Tools
See On Amazon #11
Drill America - DWDA/CX61/8 1/8" x 6" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series (Pack of 2)
Asin: B0CHMV1WNR | Model: DWDA/CX61/8 | PartNumber: DWDA/CX61/8
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Manufactured To National Aerospace Standard 907.
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
High-Speed Steel Tools Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- The information below is per-pack only
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to national aerospace standard 907
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 4.00 Pounds
See On Amazon #12
6 Pcs, 30 X 6" Hss Black Oxide Aircraft Extension Drill Bit, Drill America, D/Aa/Cx630, Flute Length: 1-5/8"; Overall Length: 6"
Asin: B0799HXZWM | Ean: 0655222891150 | UPC: 655222891150
Shank Type: Round; Style: Aircraft Extension;.
Number Of Flutes: 2; Cutting Direction: Right Hand.
Cutting Angle: 135; Point Type: Split Point;.
Flute Length: 1-5/8"; Overall Length: 6";.
Features
- Size: #30; Material: High Speed Steel; Finish: Black Oxide;
- Flute Length: 1-5/8; Overall Length: 6;
- Shank Type: Round; Style: Aircraft Extension;
- Cutting Angle: 135; Point Type: Split Point;
- Number of Flutes: 2; Cutting Direction: Right Hand
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #13
Drill America GLBCOX65/32 5/32" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series (Pack of 2)
Asin: B0CHMTZPVR | Model: GLBCOX65/32 | PartNumber: GLBCOX65/32
135° Split Point Tip Prevents Drill From Walking.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
6" Overall Length For Drilling Where Extra Length For Reach Is Required.
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Effective In Drilling Tough, High Tensile Strength Materials Like Stainless Steel, Inconel And Titanium.
Features
- The information below is per-pack only
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 6 overall length for drilling where extra length for reach is required
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #14
Drill America #28 x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series
Asin: B00B2R0EEW | Model: GLBCOX628 | PartNumber: GLBCOX628 | Ean: 0887861044905 | UPC: 887861044905
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
6" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 6 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #15
9/32 High Speed Steel Taper Point Drill 8" overall Length
Asin: B001HL26Z8 | Ean: 0807200124204 | UPC: 807200124204
Recommended For Most Jobs Whether In A Drill Press Or In Hand-Hed Equipment..
Cuts Well In Both Hard And Softwoods..
Features
- Made of High Speed Steel to hold their sharp cutting edges longer.
- Cuts well in both hard and softwoods.
- Recommended for most jobs whether in a drill press or in hand-hed equipment.
- See more on Amazon...
Brand: WL Fuller | Manufacturer: WL Fuller
Weight: 0.09 pounds
See On Amazon #16
Drill America #1 x 6" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series
Asin: B00B1CAOG6 | Model: DWDA/CX61 | PartNumber: DWDA/CX61 | Ean: 0887861042314 | UPC: 887861042314
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to national aerospace standard 907
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #17
Cleveland 950E High Speed Steel Extra Long Length Drill Bit, Black Oxide, Round Shank, 118 Degree Notched Point, 1/4" Dia. x 8" Lg (Pack of 1)
Asin: B00074ZSN8 | Model: C09665 | PartNumber: C09665 | Ean: 0697334096658 | UPC: 697334096658
Black Oxide Finish Reduces Wear While Promoting Chip And Coolant Flow On Ferrous Materials.
Drill Bit Conforms To Ansi Standards.
Made In The Usa.
Self-Centering 118-Degree Notched Point Penetrates Material More Easily Than A Conventional Point Without A Pilot Hole, And Maintains A Sharp Cutting Edge.
High-Speed Steel (Hss) Provides Hardness For Wear Resistance.
Features
- Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit
- High-speed steel (HSS) provides hardness for wear resistance
- Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
- Self-centering 118-degree notched point penetrates material more easily than a conventional point without a pilot hole, and maintains a sharp cutting edge
- Drill bit conforms to ANSI standards
- Made in the USA
- See more on Amazon...
Brand: CLEVELAND | Manufacturer: Greenfield Industries
Dimensions: 0.50 x 0.40 x 7.90 inches | Weight: 0.10 pounds
See On Amazon #18
uxcell 3mm Drilling Dia 250mm Length HSS Straight Round Shank Twist Drill Bit Black
Asin: B06XVKX3SQ | Model: a17011600ux0520 | PartNumber: a17011600ux0520 | Ean: 0604267550317 | UPC: 604267550317
Material: Hss; Flute Length: 175Mm / 6.9".
Feature: Straight Shank; Color: Black.
Bit Diameter: 3Mm / 0.12"; Weight: 15G.
Product Name: Twist Drill Bit; Package Content: 1 X Twist Drill Bit.
Features
- Total Length: 250mm / 10"; Shank Diameter: 3mm / 0.12"
- Product Name: Twist Drill Bit; Package Content: 1 x Twist Drill Bit
- Material: HSS; Flute Length: 175mm / 6.9
- Bit Diameter: 3mm / 0.12; Weight: 15g
- Feature: Straight Shank; Color: Black
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 6 mm Dia Spear Point Head Ceramic Marble Tile Glass Drill Bit 20 Pcs (Pack of 20)
Asin: B01BGIF1IA | Model: a15090900ux0705 | PartNumber: a15090900ux0705 | Ean: 0712662990765 | UPC: 712662990765
Product Name: Glass Drill Bit; Shank Diameter: 5Mm/ 0.2".
Color: Silver Tone.
Material: Metal; Type: Spear Tip.
Net Weight: 255G; Package Content: 20 Pcs X Glass Drill Bit.
Features
- Tip Size: 6mm/0.24"; Total Length: 71mm/ 2.8"
- Net Weight: 255g; Package Content: 20 Pcs x Glass Drill Bit
- Product Name: Glass Drill Bit; Shank Diameter: 5mm/ 0.2
- Material: Metal; Type: Spear Tip
- Color: Silver Tone
- See more on Amazon...
First Available: 08/12/2018
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 7.87 x 5.12 Inches | Weight: 0.00 pounds
See On Amazon #20
Auniwaig Reduced Shank Drill Bit, HSS Drill Bit 1.26", High Speed Steel with Straight Shank for Iron, Cooper, Aluminum Plate, Metal
Asin: B097TLCX6J | Model: CU7700Z2102HF-FBA | PartNumber: CU7700Z2102HF-FBA
【Advantage】-Expanding The Size Range Capacity Of A Portable Drill Chuck; Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
【Wide Applications】- Design For Drilling In Low And Medium Tensile Strength Materials; Such Aluminum; Iron; Copper; Brass And Metal.
【Special Design】-Black Oxide Treatment Adds Lubricity; Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
【Material】- High Speed Steel 6542 Is Designed To Ensure Sharp And Fast Execution In Metal Surface For Clean Results;32Mm Cutting Diameter. Good For Most General Purpose Applications, Featuring A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Parameter - Material:HSS-6542;Hardened to:65-66Hrc;Cutting Diameter:32mm/1.26inch;Total Length:150mm/5.91inch
- Material - High speed steel 6542 is designed to ensure sharp and fast execution in metal surface for clean results;32mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- Advantage -Expanding the size range capacity of a portable drill chuck; Common flute and overall length for minimal adjustment during tool changes
- Special Design -Black oxide treatment adds lubricity; Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Wide Applications - Design for drilling in low and medium tensile strength materials; such aluminum; iron; copper; brass and metal
- See more on Amazon...
Brand: Auniwaig | Manufacturer: Auniwaig
See On Amazon #21
Twist Drill Bit Spiral Drilling Bit Small Shank Long Length Drill Bits
Asin: B0CZGNWH1D | Model: ZIZEVgfbrtow961 | PartNumber: ZIZEVgfbrtow961
Applicable Material: Used For Iron, Aluminum, Copper, Stainless Steel, High Speed Steel, Manganese Steel And Various Hardened Steel Parts..
Material: This Product Is Made Of High Speed Steel, Which High Hardness And Durability, Providing Stable Performance And Excellent Durability;.
Size: The Diameter Of The Blade Is About 35 Mm/1.4 Inches, The Diameter Of The Handle Is 12.7 Mm/0.50 Inches, And The Total Length Of The Drill Bit Is About 150 Mm/5.91 Inches..
High Speed Steel: Made Of Excellent High Speed Steel, With High Hardness And Wear Resistance, Not Easy To Deform..
Features
- Easy To Use: The twist drill a blade angle of 118 and is equipped with a 1/2in handle. It is easy to install and accurate in positioning. It is not easy to fall off or loose during use.
- High Speed Steel: Made of excellent high speed steel, with high hardness and wear resistance, not easy to deform.
- Applicable Material: Used for iron, aluminum, copper, stainless steel, high speed steel, manganese steel and various hardened steel parts.
- Size: The diameter of the blade is about 35 mm/1.4 inches, the diameter of the handle is 12.7 mm/0.50 inches, and the total length of the drill bit is about 150 mm/5.91 inches.
- Material: This product is made of high speed steel, which high hardness and durability, providing stable performance and excellent durability;
- See more on Amazon...
Brand: ZIZEV | Manufacturer: ZIZEV
See On Amazon #22
uxcell 2pcs 6.9mm Dia Split Point Tip 141mm Long High-Speed Steel Twist Drill Bit
Asin: B0CYSPW9XH
Flute Length: 68Mm/2.68"; Total Length: 109Mm/4.29".
Package Content: 2 X Twist Drill Bit.
Net Weight : 21G.
Color: Black; Bit Diameter: 6.9Mm/0.27"; Shank Diameter: 6.9Mm/0.27".
Features
- Product Name: Twist Drill Bit; Features: Straight Shank; Material: High-Speed Steel
- Color: Black; Bit Diameter: 6.9mm/0.27; Shank Diameter: 6.9mm/0.27
- Flute Length: 68mm/2.68; Total Length: 109mm/4.29
- Net Weight : 21g
- Package Content: 2 x Twist Drill Bit
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #23
STM Premium 115207 Letter W Taper Length H.S.S. Drill
Asin: B0CFYRHG6R | Ean: 0644380013238 | UPC: 644380013238
Drill Bit Material: High Speed Steel.
Flute Type: Spiral Flute.
Drill Bit Finish/Coating: Black Oxide.
Drill Point Angle (Degrees): 118.
Features
- Drill Bit Size (Letter): W
- Drill Point Angle (Degrees): 118
- Drill Bit Material: High Speed Steel
- Drill Bit Finish/Coating: Black Oxide
- Flute Type: Spiral Flute
- See more on Amazon...
Brand: STM Premium | Manufacturer: STM Premium
Weight: 0.00 pounds
See On Amazon #24
kwb HSS Metal Drill Type N 8.5 mm 217085 (Extra Long, DIN 340, Right-Hand Cutting)
Asin: B00GR2N1VK | Model: 217-085 | PartNumber: 217-085 | Ean: 4009312170858
Facilitated Feed And Less Friction Thanks To Cross-Cut According To Din 1412 C..
Dimensions: Ø 8.5 Mm, Total Length: 165 Mm, Working Length: 110 Mm.
The Extra Long Version According To Din 340 Is Suitable For Steel, Cast Steel, Temperature Casting, Sintering Iron, Non-Ferrous Metals And Hard Plastics..
135 ° Spitz Angle With Smaller Cutting Length For Less Contact Pressure, Also Suitable For Harder Materials..
Features
- Precision ground drill made of high quality HSS steel in industrial quality.
- 135 Spitz angle with smaller cutting length for less contact pressure, also suitable for harder materials.
- Facilitated feed and less friction thanks to cross-cut according to DIN 1412 C.
- The extra long version according to DIN 340 is suitable for steel, cast steel, temperature casting, sintering iron, non-ferrous metals and hard plastics.
- Dimensions: 8.5 mm, total length: 165 mm, working length: 110 mm
- See more on Amazon...
Brand: kwb | Manufacturer: KWB
Weight: 0.13 pounds
See On Amazon #25
uxcell 2pcs 11.2mm Dia Split Point Tip 141mm Long High-Speed Steel Twist Drill Bit
Asin: B0CYSJ7J79
Flute Length: 96Mm/3.78"; Total Length: 141Mm/5.551".
Package Content: 2 X Twist Drill Bit.
Net Weight: 70G.
Color: Black; Bit Diameter: 11.2Mm/0.441"; Shank Diameter: 11.2Mm/0.441".
Features
- Product Name: Twist Drill Bit; Features: Straight Shank; Material: High-Speed Steel
- Color: Black; Bit Diameter: 11.2mm/0.441; Shank Diameter: 11.2mm/0.441
- Flute Length: 96mm/3.78; Total Length: 141mm/5.551
- Net Weight: 70g
- Package Content: 2 x Twist Drill Bit
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #26
uxcell 6Pcs 9.1mm Straight Shank Split Point Tip High-Speed Steel Twist Drill Bit
Asin: B0CYSJJ1SW
Flute Length: 80Mm/3.1'';Total Length: 124Mm/4.9''.
Package Content: 6 X Twist Drill Bit.
Color: Black; Weight: 81G.
Material: High-Speed Steel; Shank Diameter: 9.1Mm/0.4''.
Features
- Product Name: Twist Drill Bit; Design: Straight Shank
- Material: High-Speed Steel; Shank Diameter: 9.1mm/0.4''
- Flute Length: 80mm/3.1'';Total Length: 124mm/4.9''
- Color: Black; Weight: 81g
- Package Content: 6 x Twist Drill Bit
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #27
Drill Bit Set,Masonry Drill Bit Set, Drill and Impact Set,Concrete Drill Bits,for Milwaukee 48-20-8877 Shockwave Impact Carbide Drill Bit Concrete Screws - 7 Pc
Asin: B0CY1SDZDZ | Model: 48-20-8877 | PartNumber: 48-20-8877 | Ean: 0755833786422 | UPC: 755833786422
Drill And Impact Set Recessed Shockwave Impact Duty Nut Drivers Automatically Disengage When Screw Is Seated To Prevent Over-Torqueing 5/32" Drill Bit Ideal For 3/16" Concrete Screws, 3/16" Drill Bit Ideal For 1/4" Concrete Screws Case Is Designed For Use In Packout Use In Hammer Mode For Faster Drilling In Masonry And Concrete Durable Carbide Tip For A Wide Range Of Tough Applications ¼” Hex Shank For Added Tool Versatility.
Concrete Drill Bits What's In The Box: (1) 5/32" X 4" X 6" Shockwave Impact Duty Carbide Multi-Material Drill Bit For Concrete Screws(48-20-8872) (1) 3/16" X 4" X 6" Shockwave Impact Duty Carbide Multi-Material Drill Bit For Concrete Screws(48-20-8876) (1) 1/4" Shockwave Impact Duty Concrete Screw Nut Driver (1) 5/16" Shockwave Impact Duty Concrete Screw Nut Driver (1) Shockwave 2" Impact Torx T25 Power Bit(48-32-4485) (1) Shockwave 2" Impact Torx T30 Power Bit(48-32-4487) Owner's Manual Warranty Limited Lifetime Factory Warranty 30 Day Satisfaction Guaranteed.
Not Recommended For Porcelain Tile Kit Includes: (1) 5/32" X 4" X 6" Carbide Multi-Material Drill Bit W/ Hex, (1) 3/16" X 4" X 6" Carbide Multi-Material Drill Bit W/ Hex, (1) 1/4" Shockwave Impact Duty Concrete Screw Nut Driver, (1) 5/16" Shockwaveimpact Duty Concrete Screw Nut Driver, (1) Shockwave Impact Duty T25 2" Torx Bit, (1) Shockwave Impact Duty T30 2" Torx Bit , (1) Drive Sleeve.
Masonry Drill Bit Set Features: For Use With Brick, Block, Concrete, Steel, Aluminum, Ceramic Tile, Backer-Board, Wood, Pvc, And Drywall Up To 10X Longer Life In Stacked Materials Complete Drill/Drive System For Less Bit Changes And Faster Installation Of Concrete Screws Built In 1/4" Hex Shoulder For Use In Concrete Screw Installation Kit Shockwave Impact Duty Engineered For Hammer Drill/Drivers And Impacts.
Features
- Drill Bit Set Item specifics: Battery Included F Type Drill Accessories MPN 48-20-8877 Length 9 Width 5 Height 2 Department Tools and Equipment Model 48-20-8877 Compatible Model 48-20-8877 Color Red/Black Item Length 9 Item Width 5 Item Height 2 Material Carbide Tipped
- Masonry Drill Bit Set Features: For use with brick, block, concrete, steel, aluminum, ceramic tile, backer-board, wood, PVC, and drywall Up to 10x longer life in stacked materials Complete drill/drive system for less bit changes and faster installation of concrete screws Built in 1/4 hex shoulder for use in concrete screw installation kit SHOCKWAVE Impact Duty engineered for hammer drill/drivers and impacts
- Drill And Impact Set Recessed SHOCKWAVE Impact Duty Nut Drivers automatically disengage when screw is seated to prevent over-torqueing 5/32 drill bit ideal for 3/16 concrete screws, 3/16 drill bit ideal for 1/4 concrete screws Case is designed for use in PACKOUT Use in hammer mode for faster drilling in masonry and concrete Durable carbide tip for a wide range of tough applications hex shank for added tool versatility
- Not recommended for porcelain tile Kit Includes: (1) 5/32 x 4 x 6 Carbide Multi-Material Drill Bit w/ Hex, (1) 3/16 x 4 x 6 Carbide Multi-Material Drill Bit w/ Hex, (1) 1/4 SHOCKWAVE Impact Duty Concrete Screw Nut Driver, (1) 5/16 SHOCKWAVEImpact Duty Concrete Screw Nut Driver, (1) SHOCKWAVE Impact Duty T25 2 TORX Bit, (1) SHOCKWAVE Impact Duty T30 2 TORX Bit , (1) Drive Sleeve
- Concrete Drill Bits What's in The Box: (1) 5/32 x 4 x 6 SHOCKWAVE Impact Duty Carbide Multi-Material Drill Bit for Concrete Screws(48-20-8872) (1) 3/16 x 4 x 6 SHOCKWAVE Impact Duty Carbide Multi-Material Drill Bit for Concrete Screws(48-20-8876) (1) 1/4 SHOCKWAVE Impact Duty Concrete Screw Nut Driver (1) 5/16 SHOCKWAVE Impact Duty Concrete Screw Nut Driver (1) SHOCKWAVE 2 Impact Torx T25 Power Bit(48-32-4485) (1) SHOCKWAVE 2 Impact Torx T30 Power Bit(48-32-4487) Owner's Manual Warranty Limited Lifetime Factory Warranty 30 Day Satisfaction Guaranteed
- See more on Amazon...
Brand: IWUDSAY | Manufacturer: IWUDSAY
See On Amazon #28
TIMco MP55100 TCT Multi-Purpose Drill Bit 5.5 x 100
Asin: B002AQU2EQ | Model: MP55100 | PartNumber: MP55100 | Ean: 5055017550760
Special Diamond Ground Carbide Tip With 135 Degree Point Angle.
Heat Treated.
Ground Flute With A Silver And Gold Finish.
High Temperature Copper Brazed.
Features
- A premium quality masonry bit for use with impact or percussion drills fitted with a standard 1/2" 3 jaw chuck.
- High temperature copper brazed
- Special diamond ground carbide tip with 135 degree point angle
- Ground flute with a silver and gold finish
- Heat treated
- See more on Amazon...
Brand: TimCo | Manufacturer: TIMco
Dimensions: 1.97 x 1.97 x 1.97 inches | Weight: 0.04 pounds
See On Amazon #29
Fits Milwaukee Tool 48-89-1561 95-Piece Drill and Driver Bit Set, 1/4 in
Asin: B0CX3XJJC7 | Ean: 0711578952102 | UPC: 711578952102
Features
- If you are looking for a versatile drill and driver bit set, the Milwaukee 48-89-1561 Drill and Drive Set is just what you need. It contains a selection of fastening tools that will help to make your project easier. This kit comes with 95 pieces that include both screwdriver bits and drill bits. Each bit has a hex shank size of 1/4 in., while the shank size is 1/4". Made from steel, these fastening tools are engineered to meet the demands of the job. The kit also includes two power tools for drilling and driving screws. If you are looking for quality screwdriver bits, then this kit is definitely worth considering.
- See more on Amazon...
Brand: BYOGI | Manufacturer: BYOGI
See On Amazon #30
CTA Tools 8550 Long Hex Bit Socket - 10mm
Asin: B00IYTFPE0 | Model: 8550 | PartNumber: 8550 | Ean: 0053001085507 | UPC: 053001085507
2-Piece Construction For High Torque Purposes.
Heavy-Duty Construction Ensures Durability.
Features 1/2-Inch Drive.
4-Inches Or 102-Millimeters In Length.
Features
- Designed for Deep-Reach Applications
- 4-Inches or 102-Millimeters in Length
- 2-Piece Construction for High Torque Purposes
- Features 1/2-Inch Drive
- Heavy-Duty Construction Ensures Durability
- See more on Amazon...
Brand: CTA Tools | Manufacturer: CTA Tools
Dimensions: 1.00 x 6.75 x 1.85 Inches | Weight: 0.30 Pounds
Amazon Price: $13.70 | as of 04/25/2024
(11:08am pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon
Looking For Something Else?
Search