Best hydraulic tube compression elbow fittings - Buying Guide
Last Updated: 04/24/2024
Share on
Bestselling hydraulic tube compression elbow fittings on Amazon
- Anderson Metals 50065 Brass Compression Tube Fitting, 90 Degree Elbow, 3/8" x 3/8" Tube OD,50065-06
- Pysrych 304 Stainless Steel Compression Tube Fitting, 90 Degree Elbow, 1/2" OD x 1/2" OD, Pack of 2
- LTWFITTING 1/4-Inch OD x 1/4-Inch Female NPT 90 Degree Compression Elbow,Brass Compression Fitting(P...
- Anderson Metals - 50065-04 50065 Brass Compression Tube Fitting, 90 Degree Elbow, 1/4" x 1/4" Tube OD
- Parker Hannifin 2214P-4-4 Brass 45 Degree Extruded Elbow Pipe Fitting, 1/4" Female Thread x 1/4" Mal...
- LTWFITTING 5/16-Inch OD x 1/8-Inch Male NPT 90 Degree Compression Elbow,Brass Compression Fitting(Pa...
- 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Female To Male 45 Degree Elbow Connector Coupler 304 Stainle...
- Anderson Metals 50069 Brass Compression Tube Fitting, 90 Degree Elbow, 5/8" Tube OD x 1/2" NPT Male Pipe
- Anderson Metals - 50065-08 50065 Brass Compression Tube Fitting, 90 Degree Elbow, 1/2" x 1/2" Tube OD
- Vis Brass DOT Air Brake Compression Fitting, 90 Degree Male Elbow, Adapter Nylon Tubing to Male Pipe...
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
Anderson Metals 50065 Brass Compression Tube Fitting, 90 Degree Elbow, 3/8" x 3/8" Tube OD,50065-06
Asin: B0009VSV7O | Model: 50065-06 | PartNumber: 50065-06 | Ean: 0719852933892 | UPC: 719852933892
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Operating Temperature Range Of -65 To 250 Degrees F.
Female Compression Tube Fitting For Connecting To Male Threaded Pipes.
Features
- 90-degree elbow for connecting two tubes at an angle
- Female compression tube fitting for connecting to male threaded pipes
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Operating temperature range of -65 to 250 degrees F
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Anderson Metals | Manufacturer: Anderson Metals
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #2
Pysrych 304 Stainless Steel Compression Tube Fitting, 90 Degree Elbow, 1/2" OD x 1/2" OD, Pack of 2
Asin: B0BM3NT27X | Model: SS304-65-8 | PartNumber: SS304-65-8
Twin Ferrule Compression Fitting For A Leak-Resistant Seal In High-Pressure Applications..
Working Pressure: 2900Psi / 20Mpa;Temperature Range: -50-450℃ / -58℉ -842℉..
304 Stainless Steel For Higher Strength And Greater Corrosion Resistance,Good Sealing And Repeatability, Convenient Installation And Maintenance, Safe And Reliable Operation..
90-Degree Elbow For Connecting Tubing To Threaded Pipe At An Angle..
Features
- Size: Tube OD 1/2"; Ferrule Inner Dia : 1/2".
- 90-degree elbow for connecting tubing to threaded pipe at an angle.
- Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications.
- 304 stainless steel for higher strength and greater corrosion resistance,good sealing and repeatability, convenient installation and maintenance, safe and reliable operation.
- Working Pressure: 2900psi / 20MPa;Temperature Range: -50-450 / -58 -842 .
- See more on Amazon...
Brand: Pysrych | Manufacturer: Pysrych
See On Amazon #3
LTWFITTING 1/4-Inch OD x 1/4-Inch Female NPT 90 Degree Compression Elbow,Brass Compression Fitting(Pack of 5)
Asin: B00CHHYHVM | Model: HF7044 | PartNumber: HF7044 | Ean: 0700987900835 | UPC: 700987900835
Package Content : 5 Pcs(Include Nut And Ferrule).
Choosing Products Dimensions And Quantities At Column Of Size And Colour Seperately,Price Would Be More Favorable If Choosing Wholesale..
Materies: Brass, Net Weight: 33.6G/Pc.
Tube Size:1/4" Od Thread:1/4 Female Npt.
Features
- Type: Female Compression elbow
- Tube Size:1/4 OD Thread:1/4 Female NPT
- Package Content : 5 PCS(Include Nut And Ferrule)
- Materies: BRASS, Net Weight: 33.6g/PC
- Choosing products dimensions and quantities at column of size and colour seperately,price would be more favorable if choosing wholesale.
- See more on Amazon...
Brand: LTWFITTING | Manufacturer: Ningbo Haishu HuaxinYicheng Trade Co., Ltd.
Weight: 0.37 pounds
See On Amazon #4
Anderson Metals - 50065-04 50065 Brass Compression Tube Fitting, 90 Degree Elbow, 1/4" x 1/4" Tube OD
Asin: B0044F54XA | Model: 50065-04 | PartNumber: 50065-04 | Ean: 0719852933878 | UPC: 719852933878
Standard Fittings Use Short Nuts.
Primary Uses Water, Gasoline, Oil And Vacuum Lines.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Easy To Disassemble No Flaring Tool Required.
Use With Copper, Brass, Aluminum, Or Plastic Tubing.
Features
- Three piece construction - nut, sleeve and body with attached insert
- Use with copper, brass, aluminum, or plastic tubing
- Standard fittings use short nuts
- Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Anderson Metals | Manufacturer: Anderson Metals
See On Amazon #5
Parker Hannifin 2214P-4-4 Brass 45 Degree Extruded Elbow Pipe Fitting, 1/4" Female Thread x 1/4" Male Thread
Asin: B01BYLXC6W | Model: 2214P-4-4 | PartNumber: 2214P-4-4
Threads Made To Dry Seal Standards.
Both Forging And Extrusions Available.
Meets Functional Requirements Of Sae J530 And Sae J531.
Features
- All brass construction
- Meets functional requirements of SAE J530 and SAE J531
- Threads made to dry seal standards
- Both forging and extrusions available
- See more on Amazon...
Brand: Parker | Manufacturer: Parker Hannifin Corporation
See On Amazon #6
LTWFITTING 5/16-Inch OD x 1/8-Inch Male NPT 90 Degree Compression Elbow,Brass Compression Fitting(Pack of 5)
Asin: B076ZJ33DX | Ean: 0700987900217 | UPC: 700987900217
Package Content : 5 Pcs(Include Nut And Ferrule).
Choosing Products Dimensions And Quantities At Column Of Size And Colour Seperately,Price Would Be More Favorable If Choosing Wholesale..
Materies: Brass, Net Weight: 23.9G/Pc.
Tube Size:5/16" Od Thread:1/8 Male Npt.
Features
- Type: Male Compression elbow
- Tube Size:5/16 OD Thread:1/8 Male NPT
- Package Content : 5 PCS(Include Nut And Ferrule)
- Materies: BRASS, Net Weight: 23.9g/PC
- Choosing products dimensions and quantities at column of size and colour seperately,price would be more favorable if choosing wholesale.
- See more on Amazon...
Brand: LTWFITTING | Manufacturer: Ningbo Haishu HuaxinYicheng Trade Co., Ltd.
Weight: 0.26 pounds
See On Amazon #7
1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Female To Male 45 Degree Elbow Connector Coupler 304 Stainless Pipe Fitting, 1PCS (Size : 1")
Asin: B0CY9L99NR | Model: 045896 | PartNumber: 045896 | Ean: 8459285164228
Elbow Size: 1/4" , 3/8" , 1-1/2", 1-1/4", 1/2" , 3/4" , 1".
Package Include: 1Pcs 304 Stainless Steel 45 Degree Elbow..
Applicable Media: Water, Oil, Gas, And Certain Corrosive Liquids (W/O/G)..
Elbow Material: 304 Stainless Steel..
Features
- Product name: 45 Male to Female Stainless Steel Elbow.
- Elbow Material: 304 stainless steel.
- Elbow Size: 1/4 , 3/8 , 1-1/2, 1-1/4, 1/2 , 3/4 , 1
- Applicable media: water, oil, gas, and certain corrosive liquids (W/O/G).
- Package Include: 1pcs 304 Stainless Steel 45 Degree Elbow.
- See more on Amazon...
Brand: RAMBEX | Manufacturer: RAMBEX
Weight: 1.76 pounds
See On Amazon #8
Anderson Metals 50069 Brass Compression Tube Fitting, 90 Degree Elbow, 5/8" Tube OD x 1/2" NPT Male Pipe
Asin: B000BOC73I | Model: 50069-1008 | PartNumber: 50069-1008 | Ean: 0719852934301 | UPC: 719852934301
Standard Fittings Use Short Nuts.
Primary Uses Water, Gasoline, Oil And Vacuum Lines.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Easy To Disassemble No Flaring Tool Required.
Use With Copper, Brass, Aluminum, Or Plastic Tubing.
Features
- Three piece construction - nut, sleeve and body with attached insert
- Use with copper, brass, aluminum, or plastic tubing
- Standard fittings use short nuts
- Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Anderson Metals | Manufacturer: Anderson Metals
Dimensions: 1.00 x 1.80 x 1.50 inches | Weight: 0.02 Pounds
See On Amazon #9
Anderson Metals - 50065-08 50065 Brass Compression Tube Fitting, 90 Degree Elbow, 1/2" x 1/2" Tube OD
Asin: B000BO9CI6 | Model: 50065-08 | PartNumber: 50065-08 | Ean: 0719852933908 | UPC: 719852933908
Standard Fittings Use Short Nuts.
Primary Uses Water, Gasoline, Oil And Vacuum Lines.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Easy To Disassemble No Flaring Tool Required - See Chart For Assembly Instructions..
Use With Copper Tubing, Brass Tubing, Aluminum Tubing And Plastic Tubing Only. Not For Use On Pipe..
Features
- Three piece construction - nut, sleeve and body.
- USE WITH COPPER TUBING, BRASS TUBING, ALUMINUM TUBING AND PLASTIC TUBING ONLY. Not for use on pipe.
- Standard fittings use short nuts
- Easy to disassemble no flaring tool required - See chart for Assembly instructions.
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Anderson Metals | Manufacturer: Anderson Metals
Dimensions: 2.70 x 1.00 x 2.00 inches
See On Amazon #10
Vis Brass DOT Air Brake Compression Fitting, 90 Degree Male Elbow, Adapter Nylon Tubing to Male Pipe, 1/4" OD x 1/8" NPT Male (Pack of 1)
Asin: B07PMJ2SNL
Temperature Range: -40°F To +200°F(-40℃ To + 93℃).
Material: Ca360 Brass.
Used With: Nt100 Nylon Tubing - Sae J844 Type A And B..
Pressure: Maximum Operating Pressure Of 150 Psi..
Features
- Typical Application: Air Brake systems except where temperatures exceed +200 F tubing, or where battery acid can drip on.
- Pressure: Maximum operating pressure of 150 psi.
- Temperature Range: -40 F to +200 F(-40 to + 93 )
- Used With: NT100 Nylon Tubing - SAE J844 Type A and B.
- Material: CA360 Brass
- See more on Amazon...
Brand: Vis | Manufacturer: Vis
See On Amazon #11
Anderson Metals 54349-0502 Inverted Flare Elbow, 5/16" X 1/8" (Pack of 5)
Asin: B000BPARKW | Ean: 0719852907855 | UPC: 719852907855
Temperature Range: - 65 To +250 Degree F.
Use With Copper, Brass, Aluminum, Or Steel Tubing.
Two Piece Construction - Nut And Body.
Thread Size: 5/16-28, 1/2-20.
Features
- Tube O.D. size: 1/8" male pipe x 5/16" inverted flare
- Thread size: 5/16-28, 1/2-20
- Temperature range: - 65 to +250 degree F
- Two piece construction - nut and body
- Use with copper, brass, aluminum, or steel tubing
- See more on Amazon...
Brand: Anderson Metals | Manufacturer: Anderson Metal Corp
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 0.09 pounds
See On Amazon #12
Legines Brass Compression Fitting, 90 Degree Elbow, 1/8" Compression x 1/8" Compression, Pack of 2
Asin: B075M9XTCK | Ean: 6208252173334
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
Three Piece Construction – Nut, Sleeve And Body.
Operating Temperature Range Of -65 To +250 Degrees F.
Compression Connection On Both Ends.
Features
- 90-degree elbow for connecting two tubes at an angle
- Compression connection on both ends
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Operating temperature range of -65 to +250 degrees F
- Three piece construction nut, sleeve and body
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 4.33 x 5.12 x 1.97 inches | Weight: 0.09 pounds
See On Amazon #13
3/4 Inch Elbow Fitting Compression Elbow Fittings for 3/4 Inch Tubing System (1 pcs)
Asin: B09N9JL8WJ | Ean: 0716963346641 | UPC: 716963346641
Sturdy And Durable Body, Robust Design And Brass Material With Nickle Plating.
Using For Id 3/4 Inch Tubing System And 6 Months Warranty..
Easy To Install, 2 Wrenches Need For The Installatiion.
Rating Work Pressure, Up To 200 Psi Air Pressure.
Features
- No Leakage, Double O ring to ensure perfect sealing in 200 psi high air pressure
- Rating Work Pressure, Up to 200 psi air pressure
- Sturdy and Durable Body, Robust design and Brass material with Nickle Plating
- Easy to Install, 2 Wrenches need for the installatiion
- Using for ID 3/4 inch tubing system and 6 months warranty.
- See more on Amazon...
Brand: NBPRT | Manufacturer: NBPRT
Weight: 0.10 pounds
See On Amazon #14
Parker Hannifin VS279NTA-8-6 Brass Air Brake-NTA 45 Degree Elbow Fitting, 1/2" Compression Tube x 3/8" Male Thread
Asin: B01BYLROV6 | Model: VS279NTA-8-6 | PartNumber: VS279NTA-8-6
Ribbed Sleeve For Compression And Positive Grip.
Meets D.O.T. Fm's 571.106, Sae J246 And Sae J1131.
Stainless Steel Tube Support.
For Use In Air Brake Systems On Semi-Trucks, Trailers, Buses, Mobile Equipment And Farm Implements.
Features
- D.O.T. Compression style fittings for repairing truck and trailer air brake lines
- For Use in air brake Systems on semi-trucks, trailers, buses, mobile equipment and farm implements
- Ribbed sleeve for compression and positive grip
- Stainless steel tube support
- Meets D.O.T. FM's 571.106, SAE J246 and SAE J1131
- See more on Amazon...
First Available: 03/12/2017
Brand: Parker | Manufacturer: Parker Hannifin Corporation
Dimensions: 1.00 x 2.50 x 1.50 inches | Weight: 1.00 pounds
See On Amazon #15
Stainless Steel Elbow, 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Female/Male- Female Threaded Union Elbow, Water Pipe Joint Accessories, 1PCS (Color : Female, Size : 1/2")
Asin: B0CXTH1V1B | Model: 045896 | PartNumber: 045896 | Ean: 8459285136461
Elbow Thread: 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2";.
Package Include: 1Pcs 304 Stainless Steel Threaded Union Elbow..
Corrosion Prevention| Withstand Voltage| Rust Resistance..
Elbow Connection: Female//Male- Female;.
Features
- Union Elbow Material: 304 stainless steel.
- Elbow Connection: Female//Male- Female;
- Elbow Thread: 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2;
- Corrosion prevention| Withstand voltage| Rust resistance.
- Package Include: 1pcs 304 Stainless Steel threaded union elbow.
- See more on Amazon...
Brand: RAMBEX | Manufacturer: RAMBEX
Weight: 1.76 pounds
See On Amazon #16
Hose Adapter,Tap Connector,304 Stainless Steel Bulkhead Hosetail Pipe Fitting 3 4 6 8 10 12 13 14 16 20mm Hose Barb Connector Water Gas Fuel Panel Install-32mm (Size : 20mm)
Asin: B0D18596NL | Model: XlyCjkb | PartNumber: XlyCjkb | Ean: 9340174705877
Increase Pipeline Branches: Three-Way, Four-Way. Parts Used To Connect Tubes To Tubes To Each Other..
Perfect For Your Outside Tap At Home, The Garage, Allotment Or Anywhere Else Where An Outdoor Tap Is Used For Multiple Reasonsnote: If The Tap Can Not Connect Well, You Can Wind Sealant Tape On The Tap, Then The Connect Will Better..
Change The Direction Of The Pipe: Elbow, Elbow. Change The Pipe Diameter: Reducing Diameter (Reducing Pipe), Reducing Elbow, Branch Pipe Table, Reinforcing Pipe..
Easy To Install, High Performance And Durable, It Is Widely Used In Various Pipeline Construction And Installation..
Features
- For connecting pipes to each other: such as flanges, unions, pipe clamps, clamps, ferrules, throat clamps, etc.
- Easy to install, high performance and durable, it is widely used in various pipeline construction and installation.
- Increase pipeline branches: three-way, four-way. Parts used to connect tubes to tubes to each other.
- Change the direction of the pipe: elbow, elbow. Change the pipe diameter: reducing diameter (reducing pipe), reducing elbow, branch pipe table, reinforcing pipe.
- perfect for your outside tap at home, the garage, allotment or anywhere else where an outdoor tap is used for multiple reasonsNote: If the tap can not connect well, you can wind sealant tape on the tap, then the connect will better.
- See more on Amazon...
Brand: XlyCjkb | Manufacturer: XlyCjkb
Weight: 0.11 pounds
See On Amazon #17
Hose Adapter,Tap Connector,Brass BSP Female Thread + Copper Welding Pipe Fitting Straight Union Nut Socket Connector for Air Conditioning Refrigeration-1I4-10mm (Size : 2 inches-54mm)
Asin: B0D184FDH5 | Model: XlyCjkb | PartNumber: XlyCjkb | Ean: 9340174701305
Increase Pipeline Branches: Three-Way, Four-Way. Parts Used To Connect Tubes To Tubes To Each Other..
Perfect For Your Outside Tap At Home, The Garage, Allotment Or Anywhere Else Where An Outdoor Tap Is Used For Multiple Reasonsnote: If The Tap Can Not Connect Well, You Can Wind Sealant Tape On The Tap, Then The Connect Will Better..
Change The Direction Of The Pipe: Elbow, Elbow. Change The Pipe Diameter: Reducing Diameter (Reducing Pipe), Reducing Elbow, Branch Pipe Table, Reinforcing Pipe..
Easy To Install, High Performance And Durable, It Is Widely Used In Various Pipeline Construction And Installation..
Features
- For connecting pipes to each other: such as flanges, unions, pipe clamps, clamps, ferrules, throat clamps, etc.
- Easy to install, high performance and durable, it is widely used in various pipeline construction and installation.
- Increase pipeline branches: three-way, four-way. Parts used to connect tubes to tubes to each other.
- Change the direction of the pipe: elbow, elbow. Change the pipe diameter: reducing diameter (reducing pipe), reducing elbow, branch pipe table, reinforcing pipe.
- perfect for your outside tap at home, the garage, allotment or anywhere else where an outdoor tap is used for multiple reasonsNote: If the tap can not connect well, you can wind sealant tape on the tap, then the connect will better.
- See more on Amazon...
Brand: XlyCjkb | Manufacturer: XlyCjkb
Weight: 0.11 Pounds
See On Amazon #18
Hose Adapter,Tap Connector,SS Compression Pipe Adapter 1/2 3/4 1 NPT PT Male 14 16 18 20mm 22mm 25mm Tube Ferrule Air Fitting Connector Stainless Steel 304-PL-NPT,a-22mm OD Tube,1" (Color : Pl bspt 1
Asin: B0D182NP61 | Model: XlyCjkb | PartNumber: XlyCjkb | Ean: 9340174720405
Increase Pipeline Branches: Three-Way, Four-Way. Parts Used To Connect Tubes To Tubes To Each Other..
Perfect For Your Outside Tap At Home, The Garage, Allotment Or Anywhere Else Where An Outdoor Tap Is Used For Multiple Reasonsnote: If The Tap Can Not Connect Well, You Can Wind Sealant Tape On The Tap, Then The Connect Will Better..
Change The Direction Of The Pipe: Elbow, Elbow. Change The Pipe Diameter: Reducing Diameter (Reducing Pipe), Reducing Elbow, Branch Pipe Table, Reinforcing Pipe..
Easy To Install, High Performance And Durable, It Is Widely Used In Various Pipeline Construction And Installation..
Features
- For connecting pipes to each other: such as flanges, unions, pipe clamps, clamps, ferrules, throat clamps, etc.
- Easy to install, high performance and durable, it is widely used in various pipeline construction and installation.
- Increase pipeline branches: three-way, four-way. Parts used to connect tubes to tubes to each other.
- Change the direction of the pipe: elbow, elbow. Change the pipe diameter: reducing diameter (reducing pipe), reducing elbow, branch pipe table, reinforcing pipe.
- perfect for your outside tap at home, the garage, allotment or anywhere else where an outdoor tap is used for multiple reasonsNote: If the tap can not connect well, you can wind sealant tape on the tap, then the connect will better.
- See more on Amazon...
Brand: XlyCjkb | Manufacturer: XlyCjkb
Weight: 0.11 pounds
See On Amazon #19
Hose Adapter,Tap Connector,1 pcs NPT BSP to Male 1/8 1/4 3/8 1/2 3/4 1 inch 3000psig BSPT 316 Stainless Steel Pipe Fitting Connector-Female Street Tee,Pipe Thread - BSPT,1" (Color : Female 1/4, Size
Asin: B0D185D94Y | Model: XlyCjkb | PartNumber: XlyCjkb | Ean: 9340174705419
Increase Pipeline Branches: Three-Way, Four-Way. Parts Used To Connect Tubes To Tubes To Each Other..
Perfect For Your Outside Tap At Home, The Garage, Allotment Or Anywhere Else Where An Outdoor Tap Is Used For Multiple Reasonsnote: If The Tap Can Not Connect Well, You Can Wind Sealant Tape On The Tap, Then The Connect Will Better..
Change The Direction Of The Pipe: Elbow, Elbow. Change The Pipe Diameter: Reducing Diameter (Reducing Pipe), Reducing Elbow, Branch Pipe Table, Reinforcing Pipe..
Easy To Install, High Performance And Durable, It Is Widely Used In Various Pipeline Construction And Installation..
Features
- For connecting pipes to each other: such as flanges, unions, pipe clamps, clamps, ferrules, throat clamps, etc.
- Easy to install, high performance and durable, it is widely used in various pipeline construction and installation.
- Increase pipeline branches: three-way, four-way. Parts used to connect tubes to tubes to each other.
- Change the direction of the pipe: elbow, elbow. Change the pipe diameter: reducing diameter (reducing pipe), reducing elbow, branch pipe table, reinforcing pipe.
- perfect for your outside tap at home, the garage, allotment or anywhere else where an outdoor tap is used for multiple reasonsNote: If the tap can not connect well, you can wind sealant tape on the tap, then the connect will better.
- See more on Amazon...
Brand: XlyCjkb | Manufacturer: XlyCjkb
Weight: 0.11 pounds
See On Amazon #20
Hose Adapter,Tap Connector,Male Thread PVC Connectors Garden Water Tube Thread Joint Adapter 1/2" ~ 2" Aquarium Fish Tank Pipe Connector Fittings-1 inch,5pcs (Color : Other Color, Size : 5pcs)
Asin: B0D1867TV6 | Model: XlyCjkb | PartNumber: XlyCjkb | Ean: 9340174707840
Increase Pipeline Branches: Three-Way, Four-Way. Parts Used To Connect Tubes To Tubes To Each Other..
Perfect For Your Outside Tap At Home, The Garage, Allotment Or Anywhere Else Where An Outdoor Tap Is Used For Multiple Reasonsnote: If The Tap Can Not Connect Well, You Can Wind Sealant Tape On The Tap, Then The Connect Will Better..
Change The Direction Of The Pipe: Elbow, Elbow. Change The Pipe Diameter: Reducing Diameter (Reducing Pipe), Reducing Elbow, Branch Pipe Table, Reinforcing Pipe..
Easy To Install, High Performance And Durable, It Is Widely Used In Various Pipeline Construction And Installation..
Features
- For connecting pipes to each other: such as flanges, unions, pipe clamps, clamps, ferrules, throat clamps, etc.
- Easy to install, high performance and durable, it is widely used in various pipeline construction and installation.
- Increase pipeline branches: three-way, four-way. Parts used to connect tubes to tubes to each other.
- Change the direction of the pipe: elbow, elbow. Change the pipe diameter: reducing diameter (reducing pipe), reducing elbow, branch pipe table, reinforcing pipe.
- perfect for your outside tap at home, the garage, allotment or anywhere else where an outdoor tap is used for multiple reasonsNote: If the tap can not connect well, you can wind sealant tape on the tap, then the connect will better.
- See more on Amazon...
Brand: XlyCjkb | Manufacturer: XlyCjkb
Weight: 0.11 pounds
See On Amazon #21
Hose Adapter,Tap Connector,SS Compression Pipe Adapter 1/2 3/4 1 NPT PT Male 14 16 18 20mm 22mm 25mm Tube Ferrule Air Fitting Connector Stainless Steel 304-PC-BSPT,a-22mm OD Tube,1" (Color : Pc 3/4,
Asin: B0D184H7TG | Model: XlyCjkb | PartNumber: XlyCjkb | Ean: 9350174697737
Increase Pipeline Branches: Three-Way, Four-Way. Parts Used To Connect Tubes To Tubes To Each Other..
Perfect For Your Outside Tap At Home, The Garage, Allotment Or Anywhere Else Where An Outdoor Tap Is Used For Multiple Reasonsnote: If The Tap Can Not Connect Well, You Can Wind Sealant Tape On The Tap, Then The Connect Will Better..
Change The Direction Of The Pipe: Elbow, Elbow. Change The Pipe Diameter: Reducing Diameter (Reducing Pipe), Reducing Elbow, Branch Pipe Table, Reinforcing Pipe..
Easy To Install, High Performance And Durable, It Is Widely Used In Various Pipeline Construction And Installation..
Features
- For connecting pipes to each other: such as flanges, unions, pipe clamps, clamps, ferrules, throat clamps, etc.
- Easy to install, high performance and durable, it is widely used in various pipeline construction and installation.
- Increase pipeline branches: three-way, four-way. Parts used to connect tubes to tubes to each other.
- Change the direction of the pipe: elbow, elbow. Change the pipe diameter: reducing diameter (reducing pipe), reducing elbow, branch pipe table, reinforcing pipe.
- perfect for your outside tap at home, the garage, allotment or anywhere else where an outdoor tap is used for multiple reasonsNote: If the tap can not connect well, you can wind sealant tape on the tap, then the connect will better.
- See more on Amazon...
Brand: XlyCjkb | Manufacturer: XlyCjkb
Weight: 0.11 pounds
See On Amazon #22
Hose Adapter,Tap Connector,Fittings Connector Copper Air Fuel Water Tube Brass Barb Pipe Fitting Barbed Joint Coupler Adapter for 4mm 5 6 8 10 12-4 Way,OD 8 MM (Color : Elbow, Size : OD 6 MM)
Asin: B0D183FK63 | Model: XlyCjkb | PartNumber: XlyCjkb | Ean: 9340174704825
Increase Pipeline Branches: Three-Way, Four-Way. Parts Used To Connect Tubes To Tubes To Each Other..
Perfect For Your Outside Tap At Home, The Garage, Allotment Or Anywhere Else Where An Outdoor Tap Is Used For Multiple Reasonsnote: If The Tap Can Not Connect Well, You Can Wind Sealant Tape On The Tap, Then The Connect Will Better..
Change The Direction Of The Pipe: Elbow, Elbow. Change The Pipe Diameter: Reducing Diameter (Reducing Pipe), Reducing Elbow, Branch Pipe Table, Reinforcing Pipe..
Easy To Install, High Performance And Durable, It Is Widely Used In Various Pipeline Construction And Installation..
Features
- For connecting pipes to each other: such as flanges, unions, pipe clamps, clamps, ferrules, throat clamps, etc.
- Easy to install, high performance and durable, it is widely used in various pipeline construction and installation.
- Increase pipeline branches: three-way, four-way. Parts used to connect tubes to tubes to each other.
- Change the direction of the pipe: elbow, elbow. Change the pipe diameter: reducing diameter (reducing pipe), reducing elbow, branch pipe table, reinforcing pipe.
- perfect for your outside tap at home, the garage, allotment or anywhere else where an outdoor tap is used for multiple reasonsNote: If the tap can not connect well, you can wind sealant tape on the tap, then the connect will better.
- See more on Amazon...
Brand: XlyCjkb | Manufacturer: XlyCjkb
Weight: 0.11 Pounds
See On Amazon #23
Hose Adapter,Tap Connector,1/8" 1/4" 3/8" 1/2" BSP 45 Degree Brass Pipe Fitting Connector Adapter-Male to Male,3/8" (Color : Female to Female, Size : 1/2")
Asin: B0D1863C3P | Model: XlyCjkb | PartNumber: XlyCjkb | Ean: 9340174706980
Increase Pipeline Branches: Three-Way, Four-Way. Parts Used To Connect Tubes To Tubes To Each Other..
Perfect For Your Outside Tap At Home, The Garage, Allotment Or Anywhere Else Where An Outdoor Tap Is Used For Multiple Reasonsnote: If The Tap Can Not Connect Well, You Can Wind Sealant Tape On The Tap, Then The Connect Will Better..
Change The Direction Of The Pipe: Elbow, Elbow. Change The Pipe Diameter: Reducing Diameter (Reducing Pipe), Reducing Elbow, Branch Pipe Table, Reinforcing Pipe..
Easy To Install, High Performance And Durable, It Is Widely Used In Various Pipeline Construction And Installation..
Features
- For connecting pipes to each other: such as flanges, unions, pipe clamps, clamps, ferrules, throat clamps, etc.
- Easy to install, high performance and durable, it is widely used in various pipeline construction and installation.
- Increase pipeline branches: three-way, four-way. Parts used to connect tubes to tubes to each other.
- Change the direction of the pipe: elbow, elbow. Change the pipe diameter: reducing diameter (reducing pipe), reducing elbow, branch pipe table, reinforcing pipe.
- perfect for your outside tap at home, the garage, allotment or anywhere else where an outdoor tap is used for multiple reasonsNote: If the tap can not connect well, you can wind sealant tape on the tap, then the connect will better.
- See more on Amazon...
Brand: XlyCjkb | Manufacturer: XlyCjkb
Weight: 0.11 pounds
See On Amazon #24
Hose Adapter,Tap Connector,19-114mm Pipe OD x 1.5" 2" 2.5" 3" 3.5" 4" Eccentric Reducer SUS304 Stainless Sanitary Pipe Fitting Connector-102mmK119 to 63mmK77,SUS 304 (Color : Sus 304, Size : 57mmK77
Asin: B0D185TPC8 | Model: XlyCjkb | PartNumber: XlyCjkb | Ean: 9340174705709
Increase Pipeline Branches: Three-Way, Four-Way. Parts Used To Connect Tubes To Tubes To Each Other..
Perfect For Your Outside Tap At Home, The Garage, Allotment Or Anywhere Else Where An Outdoor Tap Is Used For Multiple Reasonsnote: If The Tap Can Not Connect Well, You Can Wind Sealant Tape On The Tap, Then The Connect Will Better..
Change The Direction Of The Pipe: Elbow, Elbow. Change The Pipe Diameter: Reducing Diameter (Reducing Pipe), Reducing Elbow, Branch Pipe Table, Reinforcing Pipe..
Easy To Install, High Performance And Durable, It Is Widely Used In Various Pipeline Construction And Installation..
Features
- For connecting pipes to each other: such as flanges, unions, pipe clamps, clamps, ferrules, throat clamps, etc.
- Easy to install, high performance and durable, it is widely used in various pipeline construction and installation.
- Increase pipeline branches: three-way, four-way. Parts used to connect tubes to tubes to each other.
- Change the direction of the pipe: elbow, elbow. Change the pipe diameter: reducing diameter (reducing pipe), reducing elbow, branch pipe table, reinforcing pipe.
- perfect for your outside tap at home, the garage, allotment or anywhere else where an outdoor tap is used for multiple reasonsNote: If the tap can not connect well, you can wind sealant tape on the tap, then the connect will better.
- See more on Amazon...
Brand: XlyCjkb | Manufacturer: XlyCjkb
Weight: 0.11 pounds
See On Amazon #25
Hose Adapter,Tap Connector,6mm 10mm 12mm Hose Barb Tail 1/4" 1/2"Inch BSP Female Thread Connector Joint Pipe Fitting SS 304 Stainless Steel Coupler Adapter-14mm Barb,1/4" (Color : 45293, Size : 19mm
Asin: B0D185S64B | Model: XlyCjkb | PartNumber: XlyCjkb | Ean: 9340174704894
Increase Pipeline Branches: Three-Way, Four-Way. Parts Used To Connect Tubes To Tubes To Each Other..
Perfect For Your Outside Tap At Home, The Garage, Allotment Or Anywhere Else Where An Outdoor Tap Is Used For Multiple Reasonsnote: If The Tap Can Not Connect Well, You Can Wind Sealant Tape On The Tap, Then The Connect Will Better..
Change The Direction Of The Pipe: Elbow, Elbow. Change The Pipe Diameter: Reducing Diameter (Reducing Pipe), Reducing Elbow, Branch Pipe Table, Reinforcing Pipe..
Easy To Install, High Performance And Durable, It Is Widely Used In Various Pipeline Construction And Installation..
Features
- For connecting pipes to each other: such as flanges, unions, pipe clamps, clamps, ferrules, throat clamps, etc.
- Easy to install, high performance and durable, it is widely used in various pipeline construction and installation.
- Increase pipeline branches: three-way, four-way. Parts used to connect tubes to tubes to each other.
- Change the direction of the pipe: elbow, elbow. Change the pipe diameter: reducing diameter (reducing pipe), reducing elbow, branch pipe table, reinforcing pipe.
- perfect for your outside tap at home, the garage, allotment or anywhere else where an outdoor tap is used for multiple reasonsNote: If the tap can not connect well, you can wind sealant tape on the tap, then the connect will better.
- See more on Amazon...
Brand: XlyCjkb | Manufacturer: XlyCjkb
Weight: 0.11 Pounds
See On Amazon #26
EDGE INDUSTRIAL Brass 45 Street Elbow 1/4" FNPT x 1/4" MNPT Fuel / AIR/ Water / Oil/ Gas WOG (Qty 01)
Asin: B07DJQPJ1F | Ean: 0691023896550 | UPC: 691023896550
Please Note, 1/4" Npt Measures 0.540" Outside Thread Diameter In Linear Inches.
Not Deemed Lead Free. Not For Potable Water.
Backed By Edge Industrial Full Manufacturers Warranty.
1200 Psi Working Pressure, Temperature Range Of -65°F To 250°F (-53°C To 121°C).
Features
- 1/4" 45 Street Elbow
- 1200 PSI working pressure, Temperature range of -65 F to 250 F (-53 C to 121 C)
- PLEASE NOTE, 1/4 NPT MEASURES 0.540 OUTSIDE THREAD DIAMETER IN LINEAR INCHES
- Backed by EDGE Industrial full manufacturers warranty
- NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER
- See more on Amazon...
Brand: EDGE INDUSTRIAL | Manufacturer: EDGE INDUSTRIAL
Weight: 0.09 pounds
See On Amazon #27
Anderson Metals-04095-0806 Brass Tube Fitting, 45 Degree Elbow, 1/2" Flare x 3/8" Male Pipe (Pack of 2)
Asin: B0CDQHPNNZ | Model: 04095-0806 | PartNumber: 04095-0806
Flared Tube Connection On One End And Male Npt Connection On The Other.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Operating Temperature Range Of -65 To +250 Degrees F.
Resists Mechanical Pullout For A More Secure Connection.
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
45-Degree Elbow For Connecting Two Tubes At An Angle.
Features
- The information below is per-pack only
- 45-degree elbow for connecting two tubes at an angle
- Flared tube connection on one end and male NPT connection on the other
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Operating temperature range of -65 to +250 degrees F
- Resists mechanical pullout for a more secure connection
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Anderson Metals | Manufacturer: Anderson Metals
Dimensions: 0.40 x 2.20 x 0.50 Inches | Weight: 0.20 pounds
See On Amazon #28
Metalwork 304 Stainless Steel Compression Tube Fitting 1/4" OD Union & 90 Degree Elbow & Tee Assortment Kit
Asin: B0B61289DZ
Type 304 Stainless Steel For Higher Strength And Greater Corrosion Resistance.
Applicable Medium: Oil, Water, Gas And Other Non-Corrosive Or Corrosive Medium..
Operating Temperatures: Below 450℃/ Working Pressure: 25Mpa-40Mpa.
Contains: 1/4" Od Union-1 Pc; 1/4" Od 90-Degree Elbow-1 Pc; 1/4" Od T Fitting-1 Pc;.
Features
- Union for connecting and disconnecting two pipes more easily than couplings
- Contains: 1/4 OD union-1 pc; 1/4 OD 90-degree elbow-1 pc; 1/4 OD t fitting-1 pc;
- Type 304 stainless steel for higher strength and greater corrosion resistance
- Operating temperatures: below 450 / Working pressure: 25Mpa-40Mpa
- Applicable medium: oil, water, gas and other non-corrosive or corrosive medium.
- See more on Amazon...
Brand: Yoebor | Manufacturer: Metalwork
See On Amazon #29
Parker Hannifin VS269NTA-4-2 Brass Air Brake-NTA Male Elbow Fitting, 1/4" Compression Tube x 1/8" Male Thread
Asin: B01BYLRDQW | Model: VS269NTA-4-2 | PartNumber: VS269NTA-4-2
Ribbed Sleeve For Compression And Positive Grip.
Meets D.O.T. Fm's 571.106, Sae J246 And Sae J1131.
Stainless Steel Tube Support.
For Use In Air Brake Systems On Semi-Trucks, Trailers, Buses, Mobile Equipment And Farm Implements.
Features
- D.O.T. Compression style fittings for repairing truck and trailer air brake lines
- For Use in air brake Systems on semi-trucks, trailers, buses, mobile equipment and farm implements
- Ribbed sleeve for compression and positive grip
- Stainless steel tube support
- Meets D.O.T. FM's 571.106, SAE J246 and SAE J1131
- See more on Amazon...
Brand: Parker | Manufacturer: Parker Hannifin Corporation
Dimensions: 0.50 x 1.30 x 1.00 inches
See On Amazon #30
Parker Hannifin VS269NTA-4-4 Brass Air Brake-NTA Male Elbow Fitting, 1/4" Compression Tube x 1/4" Male Thread
Asin: B01BYLRDDK | Model: VS269NTA-4-4 | PartNumber: VS269NTA-4-4
Ribbed Sleeve For Compression And Positive Grip.
Meets D.O.T. Fm's 571.106, Sae J246 And Sae J1131.
Stainless Steel Tube Support.
For Use In Air Brake Systems On Semi-Trucks, Trailers, Buses, Mobile Equipment And Farm Implements.
Features
- D.O.T. Compression style fittings for repairing truck and trailer air brake lines
- For Use in air brake Systems on semi-trucks, trailers, buses, mobile equipment and farm implements
- Ribbed sleeve for compression and positive grip
- Stainless steel tube support
- Meets D.O.T. FM's 571.106, SAE J246 and SAE J1131
- See more on Amazon...
First Available: 03/12/2017
Brand: Parker | Manufacturer: Parker Hannifin Corporation
Dimensions: 0.60 x 1.30 x 1.30 Inches
See On Amazon
Looking For Something Else?
Search