Best arc welding clamps - Buying Guide
Last Updated: 03/29/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
BAYTORY Upgrade Magnetic Welding Support Ground Clamp Tools, Welding Magnet Head Strong Magnetism Large Suction, Copper Tail Welding Accessories Stability Clamps
Asin: B089VS4HX2 | Ean: 0679263579273 | UPC: 679263579273
Strong Magnetic Grip - This Magnetic Clamp Attaches Easily To Any Smooth Metal Surface, Flat Or Curved. It Holds On Tightly, Without Budging Easily. Now That You've Got This, You Won't Have To Take Minutes Searching For A Good Ground Or Attaching Grounding Tabs..
Material: Copper / Insulation Board. Durable And Solid.With Copper Tail With Good Welding Stability..
Offers Convenience - Sometimes You're Faced With A Welding Job That Has Limited Options For Ground Points. You Don't Want To Have To Damage A Car's Paint Job Simply To Affix A Safety Line. This Magnetic Clamp Is Handy To Have In Such Situations. You Can Stick In On A Car Body And Not Have To Damage The Paint. The Clamp Can Also Be Attached To Metal Poles, Struts, Railings Or The Welding Table..
No-Hassle Safety Setup - You No Longer Have To Waste Your Time Finding, Placing Or Removing A Ground Point For A Welding Job. This Device Serves As The Ground Point, Which You Can Take With You Anywhere. Simply Tack This Onto A Convenient Spot, Hook Up Your Safety Wire And You're Ready To Weld..
Features
- Check out this handy Fix-tite Magnetic Welding Ground Clamp. A device that speeds up grounding chores for welders.
- NO-HASSLE SAFETY SETUP - You no longer have to waste your time finding, placing or removing a ground point for a welding job. This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld.
- STRONG MAGNETIC GRIP - This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Now that you've got this, you won't have to take minutes searching for a good ground or attaching grounding tabs.
- OFFERS CONVENIENCE - Sometimes you're faced with a welding job that has limited options for ground points. You don't want to have to damage a car's paint job simply to affix a safety line. This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table.
- Material: Copper / insulation board. Durable and solid.With copper tail with good welding stability.
- See more on Amazon...
Brand: BAYTORY | Manufacturer: BAYTORY
See On Amazon #2
Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)
Asin: B08SR3HBVZ | Model: KR0191A | PartNumber: KR0191A | Ean: 0617256084953 | UPC: 617256084953
【Applicable Types】Each Welding Square Tool Pipe Clamp Can Extend The Clamp Block To Provide A 4-Inch (1Cm) Tall Gap; Fits 3/16-Inch To 26 Gauge Sheet Metal Materials..
【High Quality & Portable】These Panel Welding Clamps Are Made Of High Quality Matrial, Which Makes Sure The Durability And Strength; Meanwhile, These Clamps Are In Small Size Can Be Easily Placed In Your Pocket Or Welding Equipment Tool Bag..
【Easy To Use】Loosen The Winged Nut From The Alignment Screw And Then Wedge Two Panels Across From Each Other Between The Square Body And The Clamp Block; Tighten The Winged Nut To Make Sure A Firm Fixation; Use All 16 Clamps For Larger Projects, Then Perform Joint Welding Between Them..
【Perfectly Align Panels】Using The Toolly Welding Square Clamp Set To Pinch Sheet Metal Panels Level To Each Other; When These Metal Clamps Hold Panels Edge-To-Edge With A Gap Of 1Mm, You Can Quickly Weld The Sheets Together..
Features
- Product Purpose Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work.
- Perfectly Align Panels Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other; When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together.
- Applicable Types Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap; Fits 3/16-inch to 26 gauge sheet metal materials.
- Easy To Use Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block; Tighten the winged nut to make sure a firm fixation; Use all 16 clamps for larger projects, then perform joint welding between them.
- High Quality & Portable These panel welding clamps are made of high quality matrial, which makes sure the durability and strength; meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag.
- See more on Amazon...
Brand: Toolly | Manufacturer: Puyi
See On Amazon #3
MUTUACTOR 500 AMP Magnetic Welding Ground Clamp, Strong Gripping Quick Release Magnetic Mount Welding Support Clamp Tools for Welding Cutting Factories Industries Work Shop and Instrument Processing
Asin: B0C2HM5ZD8 | Model: MAT-A85WeldingMagnet | PartNumber: MAT-A85WeldingMagnet
[Non-Demagnetized And Durable] Made Of High-Quality Materials, This Magnetic Clamp Is Sturdy And Durable For Long-Term Use. It Can Fix A Large Number Of Metal Items Such As Steel Plates, Pipes, And Angle Irons, Making Welding More Stable And Accurate. The Non-Demagnetized Structure Ensures Better Workmanship And A Longer Service Life..
[After-Sales Service] At Mutuactor, We Are Committed To Providing The Best After-Sales Service To Our Customers. If You Encounter Any Defects Or Other Problems During Use, Please Feel Free To Contact Us. Our Customer Service Team Will Be Happy To Assist You In Solving Any Problems..
[Quick Release And Easy To Use] The Magnetic Welding Clamp Has A Quick Release Magnet That Makes Hooking Up Your Welding Lead Very Easy, Allowing You To Ground Your Work Piece With Ease. Welding Clamp Compact, Lightweight, And Easy To Carry And Store, Making It A Convenient Tool For Welding Work..
[High Temperature Resistant And Strong Gripping Power] :Powerful Magnetic Welding Grounds Have Strong Gripping Power And Magnetically Attach To Your Ferrous Metal Work Surface. Simply Secure Ground Cable Over The Stud To Assure Excellent Electrical Ground. Spring Loaded Stud Keeps Constant Ground Contact..
Features
- [Strong Magnetic Welding Ground Clamp]: The magnetic welding clamp features a super strong built-in magnet that easily adheres to smooth, rough, curved, or flat metal surfaces, providing excellent stability and preventing the magnet from dropped off easily.
- [High Temperature Resistant and Strong Gripping Power] :Powerful magnetic welding grounds have strong gripping power and magnetically attach to your ferrous metal work surface. Simply secure ground cable over the stud to assure excellent electrical ground. Spring loaded stud keeps constant ground contact.
- [Non-demagnetized and Durable] Made of high-quality materials, this magnetic clamp is sturdy and durable for long-term use. It can fix a large number of metal items such as steel plates, pipes, and angle irons, making welding more stable and accurate. The non-demagnetized structure ensures better workmanship and a longer service life.
- [Quick Release and Easy to Use] The magnetic welding clamp has a quick release magnet that makes hooking up your welding lead very easy, allowing you to ground your work piece with ease. Welding clamp compact, lightweight, and easy to carry and store, making it a convenient tool for welding work.
- [After-sales Service] At MUTUACTOR, we are committed to providing the best after-sales service to our customers. If you encounter any defects or other problems during use, please feel free to contact us. Our customer service team will be happy to assist you in solving any problems.
- See more on Amazon...
Brand: MUTUACTOR | Manufacturer: Ningbo Auto-Tech Technology Co., Ltd
Weight: 1.46 Pounds
Warranty: 45 days
See On Amazon #4
Haosie Welding Ground Clamp, 500A Electroplated Welding Earth Clip, Copper Grounding Clamp for Manual Welder(US Type)
Asin: B0BS5PC2LZ | Model: Haosienwf2cmeb0h-01 | PartNumber: Haosienwf2cmeb0h-01 | Ean: 0628489651713 | UPC: 628489651713
【Strong Spring】The 500A Grounding Clamp Has A Strong Spring, Providing Excellent Clamping Power And Superior Electrical Connections..
【Welder Ground Clamp】It Has Stable Performance And High Reliability. The Welding Clamp Helps Weld Your Work To Good Electrical Grounding..
【Perfect Replacement】Perfect Replacement Part For Manual Welder. The Handle Adopts Non Slip Rubber To Effectively Improve The Safety Of Use..
【Electroplating Process】Welding Ground Clamps Are Electroplated, Which Has Good Wear Resistance And Is Easy To Assemble And Use..
Features
- Good Conductivity The welding ground clamp is made of quality copper, which has good electrical conductivity and is not easy to break.
- Electroplating Process Welding ground clamps are electroplated, which has good wear resistance and is easy to assemble and use.
- Strong Spring The 500A grounding clamp has a strong spring, providing excellent clamping power and superior electrical connections.
- Perfect Replacement Perfect replacement part for manual welder. The handle adopts non slip rubber to effectively improve the safety of use.
- Welder Ground Clamp It has stable performance and high reliability. The welding clamp helps weld your work to good electrical grounding.
- See more on Amazon...
Brand: Haosie | Manufacturer: Haosie
Dimensions: 1.57 x 8.46 x 3.74 inches | Weight: 0.62 Pounds
See On Amazon #5
100A/800A/1500A Heavy Duty Crocodile Clamp Pure Copper Car Battery Charger Clamps Power Replacement Battery Alligator Clips Jumper Cables Clamp Welding machine clamp-M 500-800A
Asin: B097RQ172D | Ean: 6974512605746
This Is Ideal For Applications Running On Battery Chargers (Solar Panels, Electric Fences, Etc.) Or Car Batteries (Camping, Boats, Electric Fences, Etc.) (Suitable For Most Car Jumper Portable Starters).
Pack Of 2 Fits 500-800A Powerful Car Battery Charger Clip Connector (1 Red + 1 Black).
Powerful Alligator Clip Connectors Are Widely Used In Various Electrical Engineering, Electric Welding Machines, Voltage Testers, And Are Suitable For All Car And Truck Batteries..
The Jumper Clip Is Made Of Pure Copper With Good Conductivity, With An Insulated Handle, Which Is Easy To Use..
Features
- Input: 12V and 38V; support up to: 500Amp-800Amp current
- The jumper clip is made of pure copper with good conductivity, with an insulated handle, which is easy to use.
- This is ideal for applications running on battery chargers (solar panels, electric fences, etc.) or car batteries (camping, boats, electric fences, etc.) (suitable for most car jumper portable starters)
- Powerful alligator clip connectors are widely used in various electrical engineering, electric welding machines, voltage testers, and are suitable for all car and truck batteries.
- Pack of 2 fits 500-800A Powerful car battery charger clip connector (1 red + 1 black)
- See more on Amazon...
Brand: QKUDNGHY | Manufacturer: QKUDNGHY
Dimensions: 0.83 x 6.30 x 3.94 inches | Weight: 0.79 Pounds
See On Amazon #6
Arc-Zone 300 Amp Welding Ground Clamp with Copper Strip, Extra Large
Asin: B0CCZSVHPF | Ean: 0840188203172 | UPC: 840188203172
Circular Shaped Jaw Inserts: Perfect For Clamping Onto Irregular Shapes, Offering Flexibility In Workpiece Selection..
Safe Grounding: Essential For Establishing A Secure Grounding Point Before Any Welding Task, Promoting Efficient And Safe Welding..
Safe Grounding: Essential For Establishing A Secure Grounding Point Before Any Welding Task, Promoting Efficient And Safe Welding..
Strength Spring: Ensures A Tighter Grip, Enhancing Stability And Safety During Welding Tasks..
Features
- Enhanced Electrical Connection: Enhanced with a copper strip for optimal contact and uninterrupted welding.
- Strength Spring: Ensures a tighter grip, enhancing stability and safety during welding tasks.
- Circular Shaped Jaw Inserts: Perfect for clamping onto irregular shapes, offering flexibility in workpiece selection.
- Safe Grounding: Essential for establishing a secure grounding point before any welding task, promoting efficient and safe welding.
- Safe Grounding: Essential for establishing a secure grounding point before any welding task, promoting efficient and safe welding.
- See more on Amazon...
Brand: ARC-ZONE .COM | Manufacturer: ARC-ZONE .COM
Dimensions: 1.00 x 10.00 x 4.50 inches
See On Amazon #7
Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding
Asin: B089GV3NJX | Model: KR0191A | PartNumber: KR0191A | Ean: 0609832297765 | UPC: 609832297765
Each Welding Square Tool Pipe Clamp Can Extend The Clamp Block To Provide A .4-Inch (1Cm) Tall Gap; Fits 3/16-Inch To 26 Gauge Sheet Metal Materials.
Loosen The Winged Nut From The Alignment Screw Then Wedge Two Panels Across From Each Other Between The Square Body And The Clamp Block; Tighten The Winged Nut To Ensure A Secure Hold; Use All 16 Clamps For Larger Projects, Then Joint Weld Between Them.
Use The Toolly Welding Square Clamp Set To Pinch Sheet Metal Panels Level To Each Other; While These Metal Clamps Hold Panels Edge To Edge With A 1Mm Gap, You Can Quickly Weld The Sheets Together.
Features
- Butt Welding Clamps includes 16 welding corner square welder clamps; Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects
- Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other; While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together
- Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap; Fits 3/16-inch to 26 gauge sheet metal materials
- Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block; Tighten the winged nut to ensure a secure hold; Use all 16 clamps for larger projects, then joint weld between them
- See more on Amazon...
Brand: Toolly | Manufacturer: Puyi
See On Amazon #8
2 Pack Magnetic Welding Support Ground Clamp Tools with 2 Conductive Rods, Welding Magnet Head Strong Magnetism Large Suction, Copper Tail Welding Accessories Stability Clamps
Asin: B0BWRTHY76 | Model: hjj-4 | PartNumber: hjj-4 | Ean: 0767659523389 | UPC: 767659523389
Durable Material: This Magnetic Welding Clamp Is Made With High-Quality Copper / Insulation Board With Copper Tail With Good Welding Stability. Even After Multiple Uses, Its Magnetic Force And Stability Remain Strong. Durable And Solid..
Perfect Set With Support: We Provide 2 Magnetic Welding Support Ground Clamps And 2 Conductive Screws For You To Use. If You Have Any Questions, Feel Free To Contact Us.
Versatile Application: This Welding Clamp Is Not Only Suitable For Welding, But Also For Cutting, Assembly, And Processing In Various Work Scenarios. Its Multifunctionality Makes It An Indispensable Tool For Any Metalworking Task..
Strong Magnetic Base: With The Magnetic Suction Cup, This Welding Support Ground Clamp Can Be Attached To Any Smooth Metal Surface, Flat Or Curved Within Seconds. It Holds On Tightly, Without Budging Easily. The Clamp Can Also Be Attached To Metal Poles, Struts, Railings Or The Welding Table Without Hurting The Surface.
Features
- Portable & Easy to Use: No need to waste your time finding and placing a ground point for welding. You can take this compact tool with you anywhere and use it as a ground point
- Strong Magnetic Base: With the magnetic suction cup, this Welding Support Ground Clamp can be attached to any smooth metal surface, flat or curved within seconds. It holds on tightly, without budging easily. The clamp can also be attached to metal poles, struts, railings or the welding table without hurting the surface
- Durable Material: This magnetic welding clamp is made with high-quality Copper / insulation board with copper tail with good welding stability. Even after multiple uses, its magnetic force and stability remain strong. Durable and solid.
- Versatile Application: This welding clamp is not only suitable for welding, but also for cutting, assembly, and processing in various work scenarios. Its multifunctionality makes it an indispensable tool for any metalworking task.
- Perfect Set with Support: We provide 2 Magnetic Welding Support Ground Clamps and 2 Conductive Screws for you to use. If you have any questions, feel free to contact us
- See more on Amazon...
Brand: Fpxnb | Manufacturer: Fpxnb
See On Amazon #9
260/300/500A Brass A-shape Ground Welding Earth Clamp Welder Earth Ground Cable Copper Grip Clip Clamp for Welding Machine (500A)
Asin: B07TXV9B8M | Model: FTVOGUE4vgu6d1h78-03 | PartNumber: FTVOGUE4vgu6d1h78-03 | Ean: 0707300368969 | UPC: 707300368969
This Ground Clamp Is Processed By Electroplating, Which Has Good Wear Resistance..
Customer Service: We Strive To Provide You With High Quality And Convenient Service. You Are Welcome To Contact Us If You Have Any Problem About Our Product, We Will Give You A Satisfactory Reply..
Coming With Stable Performance, The Welding Earth Clip Has High Reliability, Can Be A Perfect Replacement Part For Manual Welder..
The Products Are Suitable For Various Types Of Welding Equipment, Such As Argon Arc Welding, Submerged Arc Welding, Resistance Welding And Stud Welding..
Features
- This ground clamp is made of high-quality brass with good conductivity, oxidation resistance and long service life.
- The products are suitable for various types of welding equipment, such as argon arc welding, submerged arc welding, resistance welding and stud welding.
- This ground clamp is processed by electroplating, which has good wear resistance.
- Coming with stable performance, the welding earth clip has high reliability, can be a perfect replacement part for manual welder.
- Customer Service: We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply.
- See more on Amazon...
Brand: FTVOGUE | Manufacturer: FTVOGUE
Dimensions: 1.18 x 5.91 x 3.15 inches
See On Amazon #10
HITBOX G Ground Welding Earth Clamp 0.75kg Full Cooper 400A High Standard Solid Brass Earth Clamp for Industrial Use
Asin: B01KZLRQY6 | Model: T000007 | PartNumber: T000007
Hold Up Well, 100% Safe - This Hitbox Welding Ground Clamp Is Tight Enough To Make A Good Ground And It Won't Fall Off Or Let Loose As Spring Ground Clamps Often Do. No More Ground Popping Off When You Are Banging On The Work.
1 Year Warranty - Hitbox Ground Clamp Offers Good Warranty. If You Meet Any Problem When Using Flowmeter, Please Feel Freely To Contact Us At The First Time. Our 24 Hours Online Customer Service Will Help You Fix It. Just Buy Hitbox Machines With Confidence.
High Standard Calmp, Heavy Duty Arc - With This Clamp, The Arc Is More Steady And Easier To Strike. It Is Perfect For High Amperage Welding, From 300A To 500A. Max Jaw Opening: 2.3 Inches / 5.9 Cm. Net Weight: 1.65Lbs/0.75Kg.
Versatitle Welding Ground Calmp - This Is A Nice And Smooth Moving Clamp. It Has Three Ways To Lock Down Set Screws. This Clamp Can Be Apply To Stick Welding, Submerged Arc Welding, Gas Metal Arc Welding And Gas Tungsten Arc Welding. It Is Also Perfect For Woodworking And Metalworking Applications.
Features
- HEAVY DUTY, WORKS FLAWLESS -HITBOX C clamp type welding ground clamp is super well made and with solid brass construction. The solid brass offers it excellent clamping and better electrical conductivity. It is great to resist welding splatter and is perfect for welding set-up chores as well
- VERSATITLE WELDING GROUND CALMP - This is a nice and smooth moving clamp. It has three ways to lock down set screws. This Clamp can be apply to stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding. It is also perfect for woodworking and metalworking applications
- HOLD UP WELL, 100% SAFE - This HITBOX welding ground clamp is tight enough to make a good ground and it won't fall off or let loose as spring ground clamps often do. No more ground popping off when you are banging on the work
- HIGH STANDARD CALMP, HEAVY DUTY ARC - With this clamp, the arc is more steady and easier to strike. It is perfect for high amperage welding, from 300A to 500A. Max Jaw Opening: 2.3 Inches / 5.9 cm. Net weight: 1.65lbs/0.75kg
- 1 YEAR WARRANTY - HITBOX ground clamp offers good warranty. If you meet any problem when using flowmeter, please feel freely to contact us at the first time. Our 24 hours online customer service will help you fix it. Just buy HITBOX machines with confidence
- See more on Amazon...
Brand: HITBOX | Manufacturer: SHENZHEN UNITWELD WELDING AND MOTOR
Dimensions: 3.94 x 4.72 x 1.18 inches | Weight: 1.10 Pounds
See On Amazon #11
Magswitch Mini Multi Angle Welding Magnet - for Metal Fabrication Welding Accessories and Tools, with 300 Amp Grounding Clamp Holder and Magnet On/Off Capabilities, 150 lb Holding Force
Asin: B00O99L5P2 | Model: 474-8100351 | PartNumber: 474-8100351 | Ean: 0640024795041 | UPC: 640024795041
Dual Welder Tool - Sturdy And Compact, Fast Set Up And Good For Small Places. Does Not Require An Electrical Power Source Or Plug. This Multi Metal Fabrication Hand Tool Is A Great Addition To Your Welding Table, Welding Tools And Accessories.
Easy To Clean - Powerful Magnet Stays Clean Unlike Traditional Magnetic Squares That Hold On To Metal Chips Even When Off, With Our Heavy Duty Magnet Tool You Won’T Cut Your Fingers Cleaning Away Steel Shavings And Debris. When Turned Off Debris Falls Off.
On/Off Switch - The True On And Off Capabilities Create A Platform That Is More Efficient, Faster, Safer And Easier To Use! Use It With Tig, Spot, Stick Torch, Fiber, Arc Welders. Magnetic Grip Turns All The Way Off For Quick Release. No Need To Pry Or Fight Magnet For Precise Positioning.
Ground Welding Clamps - Incredibly Strong Magnetic Ground Clamp Allows Use With A Heavy Gauge Welding Ground Cable. Ground Connection 3/8 *16 And ¼ * 20. Instantly Ground To Any Flat And Round Steel Surface, Set Up With No Prep, Weld And Move On To The Next Job.
Features
- Angle Welding Jig - This workholding offers you more angles than all other magnetic welding tools. Holds Common angles: 45, 75, 90, 105, 120 and 135 degrees. Includes pipe notch for attaching pipe and tubing. Magnetic square holds 150 lbs
- Ground Welding Clamps - Incredibly strong magnetic ground Clamp allows use with a heavy gauge welding ground cable. Ground connection 3/8 *16 and * 20. Instantly ground to any flat and round steel surface, set up with no prep, weld and move on to the next job
- Dual Welder Tool - Sturdy and compact, fast set up and good for small places. Does not require an electrical power source or plug. This multi metal fabrication hand tool is a great addition to your welding table, welding tools and accessories
- On/Off Switch - The true ON and OFF capabilities create a platform that is more efficient, faster, safer and easier to use! Use it with tig, spot, stick torch, fiber, arc welders. Magnetic grip turns all the way off for quick release. No need to pry or fight magnet for precise positioning
- Easy to Clean - Powerful Magnet stays clean unlike traditional magnetic squares that hold on to metal chips even when off, with our heavy duty magnet tool you won t cut your fingers cleaning away steel shavings and debris. When turned off debris falls off
- See more on Amazon...
Brand: Magswitch | Manufacturer: Magswitch
Dimensions: 3.40 x 3.60 x 1.70 inches | Weight: 0.50 Pounds
See On Amazon #12
Welding Ground Clamp Brass Earth Clamp A-shape Welder Earth Ground Cable Copper Grip Clip Clamp for Welding Machine(260A)
Asin: B07WYKXKP8
Various Types Of Welding: This Product Is Suitable For All Types Of Welding Equipment, Such As Argon Arc Welding, Submerged Arc Welding, Resistance Welding And Stud Welding..
Widely Used: The Products Are Widely Used In Shipyards, Machinery Manufacturing, Oil Exploration, Automobile Manufacturing, Auto Parts And Other Industries..
Easy To Operate: It's Simple In Structure And Easy To Operate, Making It The Perfect Tool For Your Work..
Not Easy To Fall Off: A-Type Clamp Is Not Easy To Fall Off, So That You Can Use It Safely And Reliably..
Features
- LONG SERVICE LIFE: This product is made of high quality brass with good electrical conductivity, oxidation resistance and long service life.
- NOT EASY TO FALL OFF: A-type clamp is not easy to fall off, so that you can use it safely and reliably.
- VARIOUS TYPES OF WELDING: This product is suitable for all types of welding equipment, such as argon arc welding, submerged arc welding, resistance welding and stud welding.
- EASY TO OPERATE: It's simple in structure and easy to operate, making it the perfect tool for your work.
- WIDELY USED: The products are widely used in shipyards, machinery manufacturing, oil exploration, automobile manufacturing, auto parts and other industries.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 1.18 x 5.91 x 3.15 inches
See On Amazon #13
Hynade Welding Magnetic Ground Clamp,Strong Magnetism Large Suction Welder Magnet Head Safety Wire Holder,Copper Tail Welding Support Tool Accessories (WMG-02)
Asin: B09CKG13SW | Ean: 0706189866979 | UPC: 706189866979
Easy To Use Magnetic Ground Clamp- Set Up A Ground Clamp For Welding Jobs Anywhere In Seconds.Tack This Onto A Convenient Spot, Hook Up Your Safety Wire And You're Ready To Weld.
Package Included- 1 X Welding Ground Magnet.
Great Use Of Magnet Tool- Small Tools With Simple Design And Easy Installation. Bring Great Convenience To Your Welding Work. The Magnetic Welding Support Ground Clamp Speeds Up Grounding Chores For Welders.
Material- The Welding Ground Clamp Made Of 200A Copper Wire Tail, Refined Conductive Rod, High Current, Stable Conductivity. Thick Insulation Board, Durable And Good Insulation. Fixed With Double Washers, Reinforced And Thickened Nuts, High Strength And Hardness.
Features
- Strong magnetism large suction grip - This welding ground magnet attaches easily to any smooth metal surface, flat or curved.The clamp can also be attached to metal poles, struts, railings or the welding table
- Material- The welding ground clamp made of 200A copper wire tail, refined conductive rod, high current, stable conductivity. Thick insulation board, durable and good insulation. Fixed with double washers, reinforced and thickened nuts, High strength and hardness
- Easy to use magnetic ground clamp- Set up a ground clamp for welding jobs anywhere in seconds.Tack this onto a convenient spot, hook up your safety wire and you're ready to weld
- Great use of magnet tool- small tools with simple design and easy installation. Bring great convenience to your welding work. The Magnetic Welding Support Ground Clamp speeds up grounding chores for welders
- Package included- 1 x welding ground magnet
- See more on Amazon...
Brand: hynade | Manufacturer: hynade
See On Amazon #14
200A Magnetic Welding Ground Clamp, 200A On/off Adjustable Magnetic Welding Ground Clamp Rare Earth Switchable Magnet Welding Holder,Grounding Magnet Connector
Asin: B08G51393T | Ean: 0694341490530 | UPC: 694341490530
Easy To Use: Strong Grip On Flat Or Round Iron Surfaces. The On/Off Control Makes The Metal Dust Fall Off Without Cleaning, Which Is Convenient And Simple To Use..
Warm Tips: Make Sure That The Grounding Device Is In The Off State When It Is Not In Contactwith The Ferromagnetic Material. It Can Be Freely Controlled To Open And Close. When The Ferromagnetic Material Is Opened And Connected, It Will Produce Sudden And Powerful Suction. Do Not Use Welding Grounding To Lift Or Transport Materials..
Package Included:1 X Welding Ground Clamp.
200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 Kg, Simple To Connect, Ground Wire Of Welding Machine. Simply Place On Clean Surface And Turn On Then Start Welding. Stays Clean Because Magnetic Field Turns Completely Off..
Features
- Magnetic Welding Ground Clamp: Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces.
- 200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off.
- Easy to Use: Strong grip on flat or round iron surfaces. The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use.
- Package Included:1 x Welding Ground Clamp
- Warm Tips: Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials.
- See more on Amazon...
Brand: ANER | Manufacturer: ANER
Dimensions: 3.15 x 12.60 x 3.94 inches | Weight: 0.02 Pounds
See On Amazon #15
Welding Ground Clamp 500A Electroplated Welding Earth Clip for Manual Welder Copper US Type Dutch Type(US Type)
Asin: B07KXWPVF2 | Model: Wal fronttuxed4gk6r-01 | PartNumber: Wal fronttuxed4gk6r-01 | Ean: 0794419787613 | UPC: 794419787613
▶ Perfect Replacement---This Welding Ground Clamp Is Perfect Replacement Part For Manual Welder, With Stable Performance, High Reliability.
▶ Superior After Sale Support---Please Feel To Contact Us For Your Any Problems About Our Product. It Is Our Pleasure To Service You. Do Not Doubt Your Importance To Us.
▶ Specification---Condition: 100% Brand New; Optional Type: Us Type, Dutch Type; Current Rating: 500A; Size: 20 × 9 × 3Cm / 7.9 × 3.5 × 1.2In; Weight: Approx. 276-336G / 9.7-11.8Oz.
▶ Good Conductivity---Adopting High Quality Copper, The Welding Ground Clamp Has Good Conductivity, Easy To Assemble And Use.
Features
- GOOD WEAR RESISTANCE---This welding ground clamp is processed by electroplating, having good wear resistance, could be used for a long period
- GOOD CONDUCTIVITY---Adopting high quality copper, the welding ground clamp has good conductivity, easy to assemble and use
- PERFECT REPLACEMENT---This welding ground clamp is perfect replacement part for manual welder, with stable performance, high reliability
- SPECIFICATION---Condition: 100% brand new; Optional Type: US type, Dutch type; Current Rating: 500A; Size: 20 9 3cm / 7.9 3.5 1.2in; Weight: Approx. 276-336g / 9.7-11.8oz
- SUPERIOR AFTER SALE SUPPORT---Please feel to contact us for your any problems about our product. It is our pleasure to service you. Do not doubt your importance to us
- See more on Amazon...
Brand: Walfront | Manufacturer: Wal front
Dimensions: 1.57 x 8.46 x 3.74 inches
See On Amazon #16
ABN Butt Welding Clamps - 16 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding
Asin: B08464DZCJ | Model: 8544 | PartNumber: 8544 | Ean: 0810009878544 | UPC: 810009878544
[Easy To Use] Loosen The Winged Nut From The Alignment Screw Then Wedge Two Panels Across From Each Other Between The Square Body And The Clamp Block; Tighten The Winged Nut To Ensure A Secure Hold; Use All 16 Clamps For Larger Projects, Then Joint Weld Between Them.
[Contents] Welding Accessories Set Includes 16 Welding Corner Square Welder Clamps; Used To Make Precision Butt Welds And Edge-To-Edge Welds For Patch Repairs In Floors, Wings, Door Skins, Fabricating, And Re-Skinning Projects.
[Built To Last] Panel Welding Clamps Are Constructed Of Zinc-Plated Steel To Ensure Maximum Durability And Strength While Resisting Rust.
[Fits Your Project] Each Welding Square Tool Pipe Clamp Can Extend The Clamp Block To Provide A .4-Inch (1Cm) Tall Gap; Fits 3/16-Inch To 26 Gauge Sheet Metal Materials.
Features
- [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other; While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together
- [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap; Fits 3/16-inch to 26 gauge sheet metal materials
- [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block; Tighten the winged nut to ensure a secure hold; Use all 16 clamps for larger projects, then joint weld between them
- [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust
- [Contents] Welding accessories set includes 16 welding corner square welder clamps; Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 2.90 x 6.10 x 4.00 inches
See On Amazon #17
KOHAND 6 PCS V-Type Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, Magnetic V Pads Kit, Magnetic V-sharp Tab Holder Corner for Tack Welding, 18 Lbs Pull Force
Asin: B09YNXNCNR
Adjustable Design - The Adjustable V-Shaped Welding Fixture Can Be Adjusted For Different Shapes, Such As Round, Flat, And Angle Metal Surfaces. It Can Be Easily Fixed And Positioned, Saving Time And Making Them Easy To Install And Apply..
About Returns - If You're Hesitant To Place An Order Because Of Concerns About Returns, There Is No Need At All. Our Refund Policy Is Clear And Unambiguous. For Any Reason, If The Magnetic V Pads Kit Is Not As Good As You Expected, You Can Get A Refund Within 30 Days..
Wide Application - The V-Type Magnetic Welding Clamps Are Suitable For Holding Tabs, Gussets, Plates And Odd Shaped Pieces In Position For Tack Welding. They Are Widely Used In Doors, Tool Boxes, Windows, Wooden Boxes, Furniture, And Other Equipment..
Strong Magnetic Force - Each V-Sharp Tab Holder Corner Is Equipped With Magnets. It Has A Maximum Pull Force Of 18 Lbs/8 Kg. These Magnets Provide A Firm Grip And Can Be Held And Positioned Quickly And Easily..
Features
- HIGH-QUALITY MATERIAL - This magnetic welding clamp is made of high-quality steel. It is durable and not easy to rust, and can be used for a long time. Both the cushion surface and the bottom have magnets, which can hold the workpiece well for welding work.
- STRONG MAGNETIC FORCE - Each V-sharp tab holder corner is equipped with magnets. It has a maximum pull force of 18 lbs/8 kg. These magnets provide a firm grip and can be held and positioned quickly and easily.
- ADJUSTABLE DESIGN - The adjustable v-shaped welding fixture can be adjusted for different shapes, such as round, flat, and angle metal surfaces. It can be easily fixed and positioned, saving time and making them easy to install and apply.
- WIDE APPLICATION - The V-type magnetic welding clamps are suitable for holding tabs, gussets, plates and odd shaped pieces in position for tack welding. They are widely used in doors, tool boxes, windows, wooden boxes, furniture, and other equipment.
- ABOUT RETURNS - If you're hesitant to place an order because of concerns about returns, there is no need at all. Our refund policy is clear and unambiguous. For any reason, if the magnetic v pads kit is not as good as you expected, you can get a refund within 30 days.
- See more on Amazon...
Brand: KOHAND | Manufacturer: KOHAND
See On Amazon #18
KOHAND 12 PCS V-Type Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, Magnetic V Pads Kit, Magnetic V-sharp Tab Holder Corner for Tack Welding, 18 Lbs Pull Force
Asin: B09YNY3R5H | Model: AD-22041514 | PartNumber: AD-22041514
Adjustable Design - The Adjustable V-Shaped Welding Fixture Can Be Adjusted For Different Shapes, Such As Round, Flat, And Angle Metal Surfaces. It Can Be Easily Fixed And Positioned, Saving Time And Making Them Easy To Install And Apply..
About Returns - If You're Hesitant To Place An Order Because Of Concerns About Returns, There Is No Need At All. Our Refund Policy Is Clear And Unambiguous. For Any Reason, If The Magnetic V Pads Kit Is Not As Good As You Expected, You Can Get A Refund Within 30 Days..
Wide Application - The V-Type Magnetic Welding Clamps Are Suitable For Holding Tabs, Gussets, Plates And Odd Shaped Pieces In Position For Tack Welding. They Are Widely Used In Doors, Tool Boxes, Windows, Wooden Boxes, Furniture, And Other Equipment..
Strong Magnetic Force - Each V-Sharp Tab Holder Corner Is Equipped With Magnets. It Has A Maximum Pull Force Of 18 Lbs/8 Kg. These Magnets Provide A Firm Grip And Can Be Held And Positioned Quickly And Easily..
Features
- HIGH-QUALITY MATERIAL - This magnetic welding clamp is made of high-quality steel. It is durable and not easy to rust, and can be used for a long time. Both the cushion surface and the bottom have magnets, which can hold the workpiece well for welding work.
- STRONG MAGNETIC FORCE - Each V-sharp tab holder corner is equipped with magnets. It has a maximum pull force of 18 lbs/8 kg. These magnets provide a firm grip and can be held and positioned quickly and easily.
- ADJUSTABLE DESIGN - The adjustable v-shaped welding fixture can be adjusted for different shapes, such as round, flat, and angle metal surfaces. It can be easily fixed and positioned, saving time and making them easy to install and apply.
- WIDE APPLICATION - The V-type magnetic welding clamps are suitable for holding tabs, gussets, plates and odd shaped pieces in position for tack welding. They are widely used in doors, tool boxes, windows, wooden boxes, furniture, and other equipment.
- ABOUT RETURNS - If you're hesitant to place an order because of concerns about returns, there is no need at all. Our refund policy is clear and unambiguous. For any reason, if the magnetic v pads kit is not as good as you expected, you can get a refund within 30 days.
- See more on Amazon...
Brand: KOHAND | Manufacturer: KOHAND
See On Amazon #19
Welding Knight T-style Welding Ground Clamp 300-Amp Brass Welding Ground Earth Clamp For Welding Applications - TIG/MIG/MMA Tig Welder
Asin: B0BV5WKXB2
Brass Material: Welding Knight Welding Ground Clamp Is Made Of Premium Brass Material With Great Conductivity, And Oxidation Resistance For Long Service Life..
Applications: T-Style Wide-Jaw Welding Ground Clamp Is Suitable For Most Grounding Situations, Such As Tig/Mig/Mma/Plasma Welding/Cutting Machine Applications, Meeting Your Daily Needs..
Safe: Large Contact Surface Area Can Give Good Cable Connections And Positive Grounding. Inspected And Tested By Professional Engineers Before Leaving The Factory..
Characteristics: 300-Amp Welding Cable Capacity. Insulated Spring And Serrated Non-Slip Jaw Design. It Can Provide Excellent Clamping Force For Your Work Surface. Stable And Not Easy To Fall Off..
Features
- Specification: 7 inches long with 1.2 inches Maximum jaw opening. Weight approximately 0.95 lbs, strong grip, and T-style multifunctional wide-jaw welding ground clamp.
- Characteristics: 300-Amp welding cable capacity. Insulated spring and serrated Non-Slip jaw design. It can provide excellent clamping force for your work surface. Stable and not easy to fall off.
- Brass Material: Welding Knight welding ground clamp is made of premium Brass material with great conductivity, and oxidation resistance for long service life.
- Safe: Large contact surface area can give good cable connections and positive grounding. Inspected and tested by professional engineers before leaving the factory.
- Applications: T-style wide-jaw welding ground clamp is suitable for most grounding situations, such as TIG/MIG/MMA/Plasma welding/Cutting machine applications, meeting your daily needs.
- See more on Amazon...
Brand: Welding Knight | Manufacturer: Weldingknight Co., Ltd
See On Amazon #20
WOPPLXY 4 Pcs 6 Inch Heavy Duty C Clamps, Industrial Strength, 1200lbs Load Limit, Quality Iron C Clamps with Sliding T-Bar Handle, C-Clamp Set for Woodworking, Welding, and Building
Asin: B0BWNCN9V5 | Model: 4 | PartNumber: 4
【Sliding T-Handle】- The Heavy Duty C Clamps Sliding T-Handle Can Provide A Suitable Maximum Torque, And The Threaded Rod Is Smooth And Flexible During Use, Not Easy To Get Stuck, Effectively Reducing Hand Fatigue..
【Wide Applications】- The Multifunctional Clamps Heavy Duty 6 Inch Is Not Only Suitable For Assembly, Fastening, Bonding, Welding Of Woodworking, But Also For Household Products, Construction, Automotive Applications And Metal Processing, And Can Also Be Used For Crafting, Painting, Carving, Masonry Architecture And Photography..
【Easy To Use】- The C Clamp Set Is Equipped With An Adjustable Set Screw. It Can Be Adjusted According To Your Needs, And It Only Needs To Be Clamped On Any Tabletop Or Wooden Bar When Using, And The Clamping Thickness Can Reach 6 Inches, Which Is Very Easy To Operate..
【High-Quality Material】- The C Clamp Is Made Of Heavy-Duty Cast Iron, Which Has A Certain Strength, Is Hard And Durable, And Has A Green Coating Surface, Which Is Not Easy To Rust, And The Heavy-Duty Design Of The Clamp Can Ensure That The Clamped Object Will Not Be Easily Deformed..
Features
- C-Clamp Size - The C-clamp has a jaw opening of 6 inches / 15 cm, a throat depth of 3 inches / 7.5 cm, and a clamping force of up to 1200 pounds.
- High-Quality Material - The C Clamp is made of heavy-duty cast iron, which has a certain strength, is hard and durable, and has a green coating surface, which is not easy to rust, and the heavy-duty design of the clamp can ensure that the clamped object will not be easily deformed.
- Sliding T-Handle - The Heavy duty C Clamps sliding T-handle can provide a suitable maximum torque, and the threaded rod is smooth and flexible during use, not easy to get stuck, effectively reducing hand fatigue.
- Easy to Use - The C Clamp set is equipped with an adjustable set screw. It can be adjusted according to your needs, and it only needs to be clamped on any tabletop or wooden bar when using, and the clamping thickness can reach 6 inches, which is very easy to operate.
- Wide Applications - The multifunctional clamps heavy duty 6 inch is not only suitable for assembly, fastening, bonding, welding of woodworking, but also for household products, construction, automotive applications and metal processing, and can also be used for crafting, painting, carving, masonry architecture and photography.
- See more on Amazon...
Brand: WOPPLXY | Manufacturer: WOPPLXY
Dimensions: 6.00 x 6.00 x 4.00 inches
See On Amazon #21
Welding Ground Clamp 500A Welding Welding Machine Welding Work Clamp Clamp Fastener Welding for Apparatus Welding Earth Clamp Welding Earth Connector Welding Grounding Clamp
Asin: B0CYT32DTJ | Model: Genericwgxgtkmrao-11 | PartNumber: Genericwgxgtkmrao-11
Large Diameter: The Opening Of Brass Ground Clamp Is About 60Mm, Large Diameter, More Practical, Widely Used In Automobile Parts And Other Industries..
Handle Cover: Ground Clamp Body Handle Part Of The Cover Design Is More Intimate, So That The Grip Has A Non Slip Effect..
Safe To Use: Grounding Clip Allows Conductive Value Up To 500A, Not Afraid Of High Current, Use More Peace Of Mind, More Secure..
Brass Material: The Grounding Clip Is Made Of Brass, Which Has Good Electrical Conductivity, Oxidation Resistance And Long Service Life..
Features
- Summary Of Selling Points: Essential accessories for welding equipment The ground clamp is an essential accessory for welding equipment. It is practical and can effectively improve work efficiency.
- BRASS MATERIAL: The grounding clip is made of brass, which has good electrical conductivity, oxidation resistance and long service life.
- LARGE DIAMETER: The opening of brass ground clamp is about 60mm, large diameter, more practical, widely used in automobile parts and other industries.
- SAFE TO USE: Grounding clip allows conductive value up to 500A, not afraid of high current, use more peace of mind, more secure.
- HANDLE COVER: Ground clamp body handle part of the cover design is more intimate, so that the grip has a non slip effect.
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon #22
Welding Earth Clamp Welding Ground Clamp Electroplated Welding Earth Clip C Earth Clamp Welding Equipment for Welding Machine (300A)
Asin: B0CYT7M75T | Model: ZAWELIYOk67hzw3ouf-02 | PartNumber: ZAWELIYOk67hzw3ouf-02
[Widely Used] Widely Used In Shipyards, Machinery Manufacturing, Oil Exploitation, And Automobile Industries For Efficient Grounding During Welding..
[A-Type Clamp Design] A-Type Clamp Design Ensures It Is Safe And Reliable To Use, With Minimal Of Falling Off During Operation..
[Versatile Usage] Suitable For Various Welding Equipment Like Argon Arc Welding And Submerged Arc Welding, Making It A Versatile Tool For Different Industries..
[High-Quality Brass Material] The Welding Ground Clamp Is Made Of High-Quality Brass With Good Conductivity And Oxidation Resistance, Ensuring A Long Service Life..
Features
- [Easy to Operate] Featuring a simple structure, the earth clamp is easy to operate, providing convenience and effectiveness in welding tasks.
- [High-quality Brass Material] The Welding Ground Clamp is made of high-quality brass with good conductivity and oxidation resistance, ensuring a long service life.
- [Widely Used] Widely used in shipyards, machinery manufacturing, oil exploitation, and automobile industries for efficient grounding during welding.
- [Versatile Usage] Suitable for various welding equipment like argon arc welding and submerged arc welding, making it a versatile tool for different industries.
- [A-type Clamp Design] A-type clamp design ensures it is safe and reliable to use, with minimal of falling off during operation.
- See more on Amazon...
Brand: ZAWELIYO | Manufacturer: ZAWELIYO
See On Amazon #23
Welding Support Ground Clamp Tools Copper Tail Welding Accessories Stability Clamps Welding Repair Tools Anti-rust Welding Ground Clamp Magnet
Asin: B0CYTC74QV | Ean: 7593142989201
This Clamp Is Handy To Have In Such Situations. You Can In On A Car Body And Not Have To Damage The Paint. The Clamp Can Also Be Attached To Metal Poles, Struts, Railings The Welding Table..
Pure Copper / Thickened Dmc Insulation Board. Durable And Solid. Anti-Rust, Long Life. Current. With Good Welding Stability..
You No Longer Have To Waste Your For Time Finding, Placing Removing A Ground Point For A Welding Job. This Device Serves As The Ground Point, Which You Can Take With You.
Simply This Onto A Convenient Hook Up Your Safety Wire, And You're Ready To Weld..
Features
- This welding support clamp attaches easily to any smooth metal surface, flat curved. It holds on tightly, without budging easily.
- Simply this onto a convenient hook up your safety wire, and you're ready to weld.
- This clamp is handy to have in such situations. You can in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings the welding table.
- You no longer have to waste your for time finding, placing removing a ground point for a welding job. This device serves as the ground point, which you can take with you
- pure copper / thickened DMC insulation board. Durable and solid. Anti-rust, long life. current. With good welding stability.
- See more on Amazon...
Brand: SARDFXUL | Manufacturer: SARDFXUL
See On Amazon #24
Yuecoom 5pcs Photovoltaic Grounding Clamps,Photovoltaic Grounding Terminal Solar Panel Ground Terminal Cable Lug for with Various Aluminum Pv Guide Rails
Asin: B0CYTBQG2N
Compatible Rail Systems: The Photovoltaic Grounding Clip Is Versatile And Compatible With A Range Of Aluminum Pv Guide Rails, Including Those Used In Rooftop, Ground-Mounted, And Carport Solar Installations. It Can Also Be Utilized With C-Channel Steel, U-Channel Steel, H-Slot Steel, And Other Similar Rail Types..
Replacement Parts And Installation Flexibility: The Package Includes 5 Grounding Clips Designed For Use In Solar Mounting Systems. These Clips Can Easily Replace Old Or Damaged Components, Providing Flexibility In Multiple Grounding Conduction Installation Methods To Suit Various System Configurations..
Durable Metal Construction: Constructed From A Combination Of Aluminum Alloy Body And Stainless Steel Screws, This Grounding Terminal Boasts A Sturdy And Reliable Metal Structure That Offers Excellent Wear Resistance , Ensuring Long-Lasting Performance..
Operational Principle: Upon Tightening The Screw, The Spike Embedded In The Device Penetrates The Anodized Layer Of The Aluminum Rail Or Other Conductive Metal Surface, Establishing A Secure And Airtight Electrostatic Connection For Effective Grounding..
Features
- Primary Function: This grounding component serves as an arrester protection device designed to gather static electricity generated by photovoltaic modules and brackets, channeling it through copper wire for efficient dissipation into the ground.
- Operational Principle: Upon tightening the screw, the spike embedded in the device penetrates the anodized layer of the aluminum rail or other conductive metal surface, establishing a secure and airtight electrostatic connection for effective grounding.
- Compatible Rail Systems: The photovoltaic grounding clip is versatile and compatible with a range of aluminum PV guide rails, including those used in rooftop, ground-mounted, and carport solar installations. It can also be utilized with C-channel steel, U-channel steel, H-slot steel, and other similar rail types.
- Durable Metal Construction: Constructed from a combination of aluminum alloy body and stainless steel screws, this grounding terminal boasts a sturdy and reliable metal structure that offers excellent wear resistance , ensuring long-lasting performance.
- Replacement Parts and Installation Flexibility: The package includes 5 grounding clips designed for use in solar mounting systems. These clips can easily replace old or damaged components, providing flexibility in multiple grounding conduction installation methods to suit various system configurations.
- See more on Amazon...
Brand: Yuecoom | Manufacturer: Yuecoom
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.49 pounds
See On Amazon #25
300a Ground Clamp, Grounding Work Clamp Earth Clamp Welding Earth Clamp Welder Welding Earth Clamp Iron Plated for Soldering
Asin: B0CYTB1F35
Simple And Easy To Use: Designed For User Convenience, The Electric Welding Ground Clamp Features A Well-Thought-Out Design That Facilitates Quick And Easy Operation. Its Intuitive Design Streamlines Workflow And Enhances Work Efficiency, Allowing Users To Attention On Their Welding Tasks With Minimal Hassle..
Non-Slip: Reinforced With Screws, The Welding Earth Clamp Offers Excellent Stability And Slip Resistance During Use. Its Durable Construction Prevents Slippage, Even Under High-Pressure Welding Conditions. Additionally, The Clamp Remains Cool And Non-Flammable When Powered On, Ensuring Safety And Reliability Throughout The Welding Process..
With Fittings: The Earth Clamp Comes Complete With Essential Fittings, Including A Hex Wrench And Fixed Iron. These Accessories Make Installation And Usage Dedicated Service, Ensuring A Seamless Welding Experience. With All Necessary Components Included, Users Can Operate The Clamp With Ease And Convenience..
Strong Material: Crafted From High-Quality Iron With Chrome Plating, The Ground Clamp Exhibits Exceptional Strength And Resilience. This Robust Construction Ensures Safe And Reliable Welding Work, Providing Peace Of Mind During Welding Operations..
Features
- Super Long Life: The grounding work clamp ensures a remarkably long and stable service life, thanks to meticulous material selection and fine processing techniques. Its durability is significantly enhanced, guaranteeing prolonged usability for various welding applications.
- Strong Material: Crafted from high-quality iron with chrome plating, the ground clamp exhibits exceptional strength and resilience. This robust construction ensures safe and reliable welding work, providing peace of mind during welding operations.
- Simple and Easy to Use: Designed for user convenience, the electric welding ground clamp features a well-thought-out design that facilitates quick and easy operation. Its intuitive design streamlines workflow and enhances work efficiency, allowing users to attention on their welding tasks with minimal hassle.
- With Fittings: The earth clamp comes complete with essential fittings, including a hex wrench and fixed iron. These accessories make installation and usage dedicated service, ensuring a seamless welding experience. With all necessary components included, users can operate the clamp with ease and convenience.
- Non-Slip: Reinforced with screws, the welding earth clamp offers excellent stability and slip resistance during use. Its durable construction prevents slippage, even under high-pressure welding conditions. Additionally, the clamp remains cool and non-flammable when powered on, ensuring safety and reliability throughout the welding process.
- See more on Amazon...
Brand: CHEOTIME | Manufacturer: CHEOTIME
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.86 pounds
See On Amazon #26
welding ground clamp clip 22 10 5 welding ground clamp 500a earth clip firm clamping fixing holding tool set kit for welder
Asin: B0CT2PMHF4 | Model: JAOCDOENi39bnx6dgq | PartNumber: JAOCDOENi39bnx6dgq
Sturdy Body: Stainless Steel Body Is Has Excellent Reliability Against Fall, Wearing And Term Use., Ground Clamp For Welder.
Premium Quality: The Stainless Steel Body Is Has Excellent Durability Against Fall, Wearing And Term Use, Ensuring All Round And Large Contact Area Well Firm Fixing, Not Likely To Get Hot., Ground Clamp For Welder.
Good Electrical Conductivity: Adopting High Quality Copper Material, The Sturdy Clamp Enables Large Clamping Force, Withstand Current Is 500A And Has Good Conductivity..
Welding Ground Clamp, Material: Adopting High Quality Copper Material, The Sturdy Clamp Enables Large Clamping Force..
Features
- copper adopting high quality copper material, the sturdy clamp enables large clamping force.
- welding ground clamp, material: adopting high quality copper material, the sturdy clamp enables large clamping force.
- sturdy body: stainless steel body is has excellent reliability against fall, wearing and term use., ground clamp for welder
- good electrical conductivity: adopting high quality copper material, the sturdy clamp enables large clamping force, withstand current is 500a and has good conductivity.
- premium quality: the stainless steel body is has excellent durability against fall, wearing and term use, ensuring all round and large contact area well firm fixing, not likely to get hot., ground clamp for welder
- See more on Amazon...
Brand: JAOCDOEN | Manufacturer: JAOCDOEN
See On Amazon #27
BTSEURY Magnetic Welding Ground Clamp,Sturdy Adjustable Switchable Holder Grounding Magnet Connector for Weld Tool Kit and Accessories (MWGC1-300F)
Asin: B0CYT95QKN | Model: BTSEURYmwxy8u2qok-12 | PartNumber: BTSEURYmwxy8u2qok-12
Good Quality Copper Rod With Spring Expansion, Close To The Ground, Double Layer Gasket Fixed With Nut Reinforcement.
Used In The Connection Between Electrical Equipment Or Other Objects And The Ground To Form A Conductive Connection.
Adopt Floating Design, So That The Conductive Is Still Smooth When Contact Surface Is Uneven.
Come With Silicone Insulation, No Heat, No Sparks, Very Stable, You Can Use With Confidence.
Features
- The magnetic switch is convenient and quick, not easy to demagnetize. Easy to take, no need to pull
- Come with silicone insulation, no heat, no sparks, very stable, you can use with confidence
- Good quality copper rod with spring expansion, close to the ground, double layer gasket fixed with nut reinforcement
- Adopt floating design, so that the conductive is still smooth when contact surface is uneven
- Used in the connection between electrical equipment or other objects and the ground to form a conductive connection
- See more on Amazon...
Brand: BTSEURY | Manufacturer: BTSEURY
See On Amazon #28
Magswitch MagJig 235 Magnetic Woodworking and Welding Base Clamp Holder for Wood Working Supplies, Accessories, Tools and Equipment, Magnet Switch with On/Off Capabilities, 235 lb Holding Force
Asin: B007Q6YTCQ | Model: 8100377 | PartNumber: 8100377 | Ean: 0878628001262 | UPC: 878628001262
On/Off Switch: The True On And Off Capabilities Create A Platform That Is More Efficient, Faster, Safer And Easier To Use! Magnetic Grip Turns All The Way Off For Quick Release. No Need To Pry Or Fight Magnet For Precise Positioning. Does Not Use An Electrical Power Source.
Easy To Clean: Powerful Magnet Stays Clean Unlike Traditional Magnetic Squares That Hold On To Metal Chips Even When Off, With Our Heavy Duty Magnet You Won’T Cut Your Fingers Cleaning Away Steel Shavings And Debris. When Turned Off, Debris Falls Off.
Features: 3/4 Inch Standoff For Flush Mount. Designed With Screw Holes To Add More Security In A Fixture. Use With The Magswitch Woodworking Starter Kit, Including Featherboard Attachment And Universal Mounting Base. Use With A Router Table, Woodworking Bench, Or Wood Jointer.
Carpenter Or Welder: Great Addition To Any Welding Or Carpentry Tools. Similar Use To C, Right Angle, 90 Degree, Spring, Square And Corner Clamps. Frame Fences, Assembly Jigs, Cutting And Gluing Fixtures, Blade Guards, Work Supports, Framing, Installing Cabinets Or Anything That Makes Your Diy Crafts Faster, Safer And Easier.
Features
- MAGJIG: Easily secure your fixture in place with 235 lb strong holding force. Whether doing woodwork or fabrication, simply drill a hole in a fixture and place the Jig in hole to use for downward pressure clamping. Strong Hold to flat and round surfaces to provide straight edge cuts
- CARPENTER OR WELDER: Great addition to any welding or carpentry tools. Similar use to c, right angle, 90 degree, spring, square and corner clamps. Frame fences, assembly jigs, cutting and gluing fixtures, blade guards, work supports, framing, installing cabinets or anything that makes your DIY crafts faster, safer and easier
- ON/OFF SWITCH: The true ON and OFF capabilities create a platform that is more efficient, faster, safer and easier to use! Magnetic grip turns all the way off for quick release. No need to pry or fight magnet for precise positioning. Does not use an electrical power source
- FEATURES: 3/4 inch standoff for flush mount. Designed with screw holes to add more security in a fixture. Use with the Magswitch woodworking starter kit, including featherboard attachment and universal mounting base. Use with a router table, woodworking bench, or wood jointer
- EASY TO CLEAN: Powerful magnet stays clean unlike traditional magnetic squares that hold on to metal chips even when off, with our heavy duty magnet you won t cut your fingers cleaning away steel shavings and debris. When turned off, debris falls off
- See more on Amazon...
Brand: Magswitch | Manufacturer: Magswitch Technology Inc.
Dimensions: 3.10 x 3.50 x 2.40 inches | Weight: 0.95 Pounds
Warranty: Magswitch products are covered by a One Year Limited Manufacturer Warranty on Material and Workmanship
See On Amazon #29
VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New
Asin: B08MVBW4GP | Model: 43449 | PartNumber: 43449 | Ean: 0716407034479 | UPC: 716407034479
For Precise Spot Welding, Positioning, Butt Welding And Edge-To-Edge Welding, Fully Align And Clamp The Metal Plates..
24X Butt Welding Clamps.
To Align And Clamp Sheet Metal Panels For Precise Spot Welding,Butt Welding,Edge-To-Edge Welding And Tacking In Place.
Features
- Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding.
- To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place
- For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates.
- 24x Butt Welding Clamps
- See more on Amazon...
Brand: VCT | Manufacturer: J&R Quality Tools
Dimensions: 4.00 x 10.00 x 5.00 inches
See On Amazon #30
16pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New
Asin: B0787XV8SX | Ean: 8856612621667
Specifications Namebutt Welding Clamps 16 Pc Sku60545 Brandchicago Electric Welding Materialsteel Quantity16 Product Height1 In. Product Length2-3/16 In. Product Width1 In. Shipping Weight2.5 Lb..
Maintains 0.40 In. Gap Between Panels For Edge-To-Edge Welding Steel With Zinc Plating To Resist Rust Ideal For Straight Or Curved Panels Easy To Install And Remove.
Features
- Butt Welding Clamps 16 Pc This set of butt welding clamps secures work pieces to make precision butt welds and edge-to-edge welding. The welding clamps are made of steel with zinc plating to resist rust and are simple to install or remove. A great set of clamps for any welding kit!
- Maintains 0.40 in. gap between panels for edge-to-edge welding Steel with zinc plating to resist rust Ideal for straight or curved panels Easy to install and remove
- Specifications NameButt Welding Clamps 16 Pc SKU60545 BrandChicago Electric Welding MaterialSteel Quantity16 Product Height1 in. Product Length2-3/16 in. Product Width1 in. Shipping Weight2.5 lb.
- See more on Amazon...
Brand: Unknown | Manufacturer: 16pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New
See On Amazon
Looking For Something Else?
Search