Best lab capillary tubes - Buying Guide
Last Updated: 04/18/2024
Share on
Bestselling lab capillary tubes on Amazon
- StonyLab Glass Capillary Tubes, 100mm Micro Glass Pipettes Capillary Transfer Tube with 0.3mm ID and...
- Corning 9530-1 Pyrex Capillary Melting Point Tube, Both Ends Open, 1.5 mm-1.8 mm OD, 0.2 mm Wall Ran...
- XCD Capillary Tubes, 100 mm Micro Glass Capillary Tubes 1000 Pack Glass Pipettes Capillary Transfer ...
- J&K Scientific Glass Capillary Tubes 0.5mm ID x 100mm, TLC Spotting Micro Pipettes, Pack of 1000
- Eisco Labs Borosilicate Glass Capillary Melting Tube in Receptacle with One Open End
- ULTECHNOVO Glass Capillary Tubes Glass Capillary Micro Pipettes Glass Melting Point Capillary Tube 500pcs
- Extra Thin Glass Capillary Tubes/Micro Pipettes TLC Spotting 0.2-0.25mm ID x 100mm 500 or 1500/pk (500)
- Corning 9530-2 Pyrex Capillary Melting Point Tube, Both Ends Open, 0.8 mm-1.1 mm ID, 0.25 mm Wall Ra...
- KIESEV 3.28 Ft Transparent Rigid Plastic Capillary Tubes Microfluidic Catheter Low-Temperature Trans...
- Glass Capillary Tubes/Micro Pipettes TLC Spotting 0.3mm ID x 100mm 500 or 1500/pk AAdvance Instrumen...
#1
StonyLab Glass Capillary Tubes, 100mm Micro Glass Pipettes Capillary Transfer Tube with 0.3mm ID and 0.5mm OD for TLC Spotting, Pack of 1000
Asin: B07ZR9Z2LZ | Ean: 0843798142084 | UPC: 843798142084
Note: The Fragility Of Capillary Tubes Is Attributed To Their Glass Composition And Extremely Small Diameter, So Please Use Them With Caution.
Stonylab Ensures High Quality Products And Premium Customer Service; If Received Damaged, Please Contact Us Immediately; We Will Solve It Until Satisfied.
Pack Of 1000.
Laboratory-Grade Glass Capillary Tubes Are Mainly Used For Sampling From Reaction Vessels With Small Volumes, As Well As For Tlc Plates.
Features
- Length: 100mm;Inner Diameter (ID): 0.3mm;Outer Diameter (OD): 0.5mm
- Laboratory-grade glass capillary tubes are mainly used for sampling from reaction vessels with small volumes, as well as for TLC plates
- Note: The fragility of capillary tubes is attributed to their glass composition and extremely small diameter, so please use them with caution
- Pack of 1000
- StonyLab ensures high quality products and premium customer service; if received damaged, please contact us immediately; we will solve it until satisfied
- See more on Amazon...
Brand: stonylab | Manufacturer: StonyLab Scientific
Dimensions: 1.18 x 4.33 x 1.18 inches | Weight: 0.09 pounds
See On Amazon #2
Corning 9530-1 Pyrex Capillary Melting Point Tube, Both Ends Open, 1.5 mm-1.8 mm OD, 0.2 mm Wall Range (Pack of 100)
Asin: B01N4L1DXV | Model: 9530-1 | PartNumber: 9530-1
The Package Width Is 9.7 Centimeters.
Package Weight : 0.029 Kilograms.
The Package Height Is 17.1 Centimeters.
Features
- The package length is 2.3 centimeters
- The package height is 17.1 centimeters
- The package width is 9.7 centimeters
- Package Weight : 0.029 kilograms
- See more on Amazon...
Brand: Corning | Manufacturer: Corning Incorporated
Dimensions: 1.57 x 3.94 x 0.07 inches | Weight: 0.00 pounds
See On Amazon #3
XCD Capillary Tubes, 100 mm Micro Glass Capillary Tubes 1000 Pack Glass Pipettes Capillary Transfer Tube with 0.3 mm ID and 0.5 mm OD for TLC Spotting Lab Capillary Tubes
Asin: B0C455CCFS | Ean: 6974151301030
Length: 100 Mm; Inner Diameter (Id): 0.3 Mm; Outer Diameter (Od): 0.5 Mm.
In Case You Receive A Defective Or Damaged Item, Please Reach Out To Us; We Will Assist You Until The Issue Is Resolved To Your Satisfaction.
Due To Their Fragile Nature Caused By The Glass Composition And Small Diameter, Please Be Caution While Using Them.
The Pack Includes 1000 Capillary Tubes.
Features
- XCD laboratory-grade glass capillary tubes; primarily designed for sampling from reaction vessels with small volumes and for use with TLC plates
- The pack includes 1000 capillary tubes
- Length: 100 mm; Inner Diameter (ID): 0.3 mm; Outer Diameter (OD): 0.5 mm
- Due to their fragile nature caused by the glass composition and small diameter, please be caution while using them
- In case you receive a defective or damaged item, please reach out to us; we will assist you until the issue is resolved to your satisfaction
- See more on Amazon...
Brand: XCD | Manufacturer: XCD
Dimensions: 4.33 x 1.18 x 1.18 inches | Weight: 0.07 pounds
See On Amazon #4
J&K Scientific Glass Capillary Tubes 0.5mm ID x 100mm, TLC Spotting Micro Pipettes, Pack of 1000
Asin: B07VGXNZX9 | Model: 928822 | PartNumber: 928822 | Ean: 0856886007844 | UPC: 856886007844
Packaged In A Sturdy Plastic Resealable Tube To Ensure That Capillary Tubes Arrive Clean And Undamaged.
Disposable, Ends Can Be Sealed By Flame.
Used For Tlc Separation Or Melting Point Analysis For Aqueous And Organic Solutions.
High-Quality Product To Ensure That Both Ends Are Open With No Flat Edges, Allowing For Easy Sampling And Spotting.
Features
- Consistent dimensions of tubes to allow for constant and precise volume filling, reducing spotting volume variations between samples
- High-quality product to ensure that both ends are open with no flat edges, allowing for easy sampling and spotting
- Packaged in a sturdy plastic resealable tube to ensure that capillary tubes arrive clean and undamaged
- Used for TLC separation or melting point analysis for aqueous and organic solutions
- Disposable, ends can be sealed by flame
- See more on Amazon...
Brand: J&K | Manufacturer: J&K
See On Amazon #5
Eisco Labs Borosilicate Glass Capillary Melting Tube in Receptacle with One Open End
Asin: B017OARJIE | Model: CH0882B | PartNumber: CH0882B | Ean: 0849230062460 | UPC: 849230062460
0.05" Outer Diameter.
Capillary Tubes In A Container With An Opening That One Tube Can Come Through.
100 Pack.
4" Length.
Features
- Glass capillary tubes
- 4 length
- 0.05 Outer Diameter
- 100 Pack
- Capillary tubes in a container with an opening that one tube can come through
- See more on Amazon...
Brand: EISCO | Manufacturer: EISCO
Dimensions: 4.00 x 6.00 x 4.00 Inches | Weight: 0.02 pounds
See On Amazon #6
ULTECHNOVO Glass Capillary Tubes Glass Capillary Micro Pipettes Glass Melting Point Capillary Tube 500pcs
Asin: B09L1DFM6R | Model: P14Q3618KKMOFJN | PartNumber: P14Q3618KKMOFJN
- The Surface Is Smooth And Polished Beautifully, So You Dont Have To Worry About Hurting Your Hands..
- Exquisite Workmanship Guarantees Its Popularity And Practicality..
- Excellent Craftsmanship Makes It Have A Good Texture And Will Not Easily..
- A Good Capillary Melting Point Tube, Which Will Meet Your Needs!.
Features
- - made of high- grade materials to ensure safety and let you use it with confidence.
- - a good capillary melting point tube, which will meet your needs!
- - The surface is smooth and polished beautifully, so you dont have to worry about hurting your hands.
- - Excellent craftsmanship makes it have a good texture and will not easily.
- - Exquisite workmanship guarantees its popularity and practicality.
- See more on Amazon...
Brand: ULTECHNOVO | Manufacturer: ULTECHNOVO
Dimensions: 0.04 x 3.94 x 0.04 inches | Weight: 0.14 Pounds
See On Amazon #7
Extra Thin Glass Capillary Tubes/Micro Pipettes TLC Spotting 0.2-0.25mm ID x 100mm 500 or 1500/pk (500)
Asin: B08JGRW8DL | Model: 0.1 x 100 | PartNumber: 0.1 x 100 | Ean: 5282799503084
With A Relatively Large Quantity Of 500 Or 1500 Tubes, At A Highly Affordable Price, One Can Say Goodbye To Reusing Capillary Tubes In Tlc Spotting (Or Any Other Application), Other Than Perhaps Using Both Ends Once Each. Save The Time, Effort, Washing Solvent And Risk Of Contamination, And Focus On More Important Aspects Of Your Research!.
As Shown In Photos, Approximate Spotting Volume As Tested For Water Is 65Mm X (0.12Mm)² X 3.14 = 3Μl. Testing Method Used Is Having The Tube At A Straight Up Angle And Allowing The Liquid To Keep On Climbing Until It Stops. If Spotted At A Tilted Angle The Draw Volume Can Be Larger, If Reducing The Spotting Time The Volume Will Be Smaller. Most Organic Solvents Will Climb Up To A Lesser Height, And Have A Smaller Draw Volume Than Water. On Average About Half The Amount..
Convenient Packaging With 1.5Mm Diameter Hole On Cap For Easy Tube Drawing Without Need To Open The Cap Or Keeping It Open All The Time..
The Extra Thin Diameter Of These Tubes Makes It Especially Suitable For Spotting Aluminum Or Plastic Backed Type Of Tlc Plates That Usually Have Thinner Silica Coating Than Glass Plates. Compared To Thicker Tubes, It Avoids The Spot From Getting Too Large. It Also Saves Your Effort Of Splitting One Draw-Volume Into Spotting Several Times, Needing To Blow-Dry Or Air-Dry In Between..
Features
- Extra thin 500 per pack capillary tubes, 0.2-0.25 mm inner diameter, 0.3-0.35 mm outer diameter, 100mm length. Non-calibrated, non precision tubes. Both ends open.
- The extra thin diameter of these tubes makes it especially suitable for spotting aluminum or plastic backed type of TLC plates that usually have thinner silica coating than glass plates. Compared to thicker tubes, it avoids the spot from getting too large. It also saves your effort of splitting one draw-volume into spotting several times, needing to blow-dry or air-dry in between.
- With a relatively large quantity of 500 or 1500 tubes, at a highly affordable price, one can say goodbye to reusing capillary tubes in TLC spotting (or any other application), other than perhaps using both ends once each. Save the time, effort, washing solvent and risk of contamination, and focus on more important aspects of your research!
- Convenient packaging with 1.5mm diameter hole on cap for easy tube drawing without need to open the cap or keeping it open all the time.
- As shown in photos, approximate spotting volume as tested for water is 65mm x (0.12mm) x 3.14 = 3 L. Testing method used is having the tube at a straight up angle and allowing the liquid to keep on climbing until it stops. If spotted at a tilted angle the draw volume can be larger, if reducing the spotting time the volume will be smaller. Most organic solvents will climb up to a lesser height, and have a smaller draw volume than water. On average about half the amount.
- See more on Amazon...
Brand: AAdvance Instruments | Manufacturer: AAdvance Instruments
See On Amazon #8
Corning 9530-2 Pyrex Capillary Melting Point Tube, Both Ends Open, 0.8 mm-1.1 mm ID, 0.25 mm Wall Range (Pack of 100)
Asin: B01MZ6Z8I3 | Model: 9530-2 | PartNumber: 9530-2
Country Of Origin: United States.
Package Dimensions: 2.3 L X 17.4H X7.1W X(Centimeters).
Package Weight : 0.03 Kilograms.
Features
- Both ends open
- Package Weight : 0.03 kilograms
- Country of Origin: United States
- Package Dimensions: 2.3 L x 17.4H x7.1W x(centimeters)
- See more on Amazon...
Brand: Corning | Manufacturer: Corning Incorporated
Dimensions: 1.57 x 3.94 x 0.04 inches | Weight: 0.00 pounds
See On Amazon #9
KIESEV 3.28 Ft Transparent Rigid Plastic Capillary Tubes Microfluidic Catheter Low-Temperature Transparent Plastic Elastic Capillary Hose (Outer diameter 1.5mm, inner diameter 1.05mm)
Asin: B0C3C36BHV | Ean: 8712962175147
Laboratory Supplies..
Processed From Brand New Raw Materials, Odorless, With Excellent High And Low Temperature Resistance, And High Transparency..
Transparent.
Features
- If you purchase one piece of this product, it is 3.28 feet (1 meter) long. If you purchase multiple pieces of this product, it will not be cut off by default, and will be shipped completely.
- Transparent
- Laboratory supplies.
- Processed from brand new raw materials, odorless, with excellent high and low temperature resistance, and high transparency.
- See more on Amazon...
Brand: KIESEV | Manufacturer: KIESEV-YUFREYOO
See On Amazon #10
Glass Capillary Tubes/Micro Pipettes TLC Spotting 0.3mm ID x 100mm 500 or 1500/pk AAdvance Instruments (1500)
Asin: B07LBPQ73Q | Model: 0.3 x 100 | PartNumber: 0.3 x 100 | Ean: 5282799502681
As Shown In Photos, Approximate Spotting Volume As Tested For Dichloromethane Is 20Mm X (0.15Mm)² X 3.14 = 1.5Μl, For Acetone Is 30Mm X (0.15Mm)²X 3.14 = 2Μl, And For Water Is 50Mm X (0.15Mm)² X 3.14 = 3.5Μl..
With A Relatively Large Quantity Of 500 Or 1500 Tubes, At A Highly Affordable Price, One Can Say Goodbye To Reusing Capillary Tubes In Tlc Spotting (Or Any Other Application), Other Than Perhaps Using Both Ends Once Each. Save The Time, Effort, Washing Solvent And Risk Of Contamination, And Focus On More Important Aspects Of Your Research!.
Testing Method Used Is Placing The Tube At A Straight Up Angle With Only The Tip Submerged In The Liquid And Allowing The Liquid To Keep On Climbing Until It Stops..
Convenient Packaging With 1.5Mm Hole On Cap For Easy Tube Drawing Without Need Of Opening The Cap Or Keeping It Open All The Time..
Features
- 1500 per pack capillary tubes, 0.3mm inner diameter, 0.5mm outer diameter. 100mm length.
- Convenient packaging with 1.5mm hole on cap for easy tube drawing without need of opening the cap or keeping it open all the time.
- As shown in photos, approximate spotting volume as tested for dichloromethane is 20mm x (0.15mm) x 3.14 = 1.5 L, for acetone is 30mm x (0.15mm) x 3.14 = 2 L, and for water is 50mm x (0.15mm) x 3.14 = 3.5 L.
- Testing method used is placing the tube at a straight up angle with only the tip submerged in the liquid and allowing the liquid to keep on climbing until it stops.
- With a relatively large quantity of 500 or 1500 tubes, at a highly affordable price, one can say goodbye to reusing capillary tubes in TLC spotting (or any other application), other than perhaps using both ends once each. Save the time, effort, washing solvent and risk of contamination, and focus on more important aspects of your research!
- See more on Amazon...
Brand: AAdvance Instruments | Manufacturer: AAdvance Instruments
See On Amazon #11
stonylab Glass Melting Point Capillary Tubes, 100 mm Glass Capillary Tube for Melting Point Measure, 0.9-1.1 mm ID, One End Sealed, 1000 PCS
Asin: B0CLD8BKPD | Ean: 0840371309582 | UPC: 840371309582
Consistent And Heat-Resistant: Uniform Inner Diameter; Can Withstand High Temperatures; Ensures Accurate And Reliable Results During Melting Point Analysis.
Warranty: 1-Year Limited Warranty; If Received Damaged, Please Contact Us Immediately; We Will Solve It Until Satisfied.
Please Exercise Caution When Handling These Capillaries, As Their Delicate Nature Is Due To Their Composition Of Glass And Extremely Small Diameter.
Specifications: Each Pack Includes 1000 Capillaries, Each Measuring 100Mm In Length And Featuring An Inner Diameter Ranging From 0.9 To 1.1 Mm.
Features
- StonyLab capillaries are typically employed in laboratory settings to ascertain the melting points of various substances; particularly well-suited for detecting the melting points of crystals or trace substances
- Specifications: each pack includes 1000 capillaries, each measuring 100mm in length and featuring an inner diameter ranging from 0.9 to 1.1 mm
- Consistent and Heat-Resistant: uniform inner diameter; can withstand high temperatures; ensures accurate and reliable results during melting point analysis
- Please exercise caution when handling these capillaries, as their delicate nature is due to their composition of glass and extremely small diameter
- Warranty: 1-year limited warranty; if received damaged, please contact us immediately; we will solve it until satisfied
- See more on Amazon...
Brand: stonylab | Manufacturer: StonyLab Scientific
Dimensions: 0.04 x 3.94 x 0.04 inches | Weight: 0.00 pounds
See On Amazon #12
stonylab Glass Capillary Tubes, 100 mm Laboratory Micro Glass Pipettes Capillary Transfer Tube for TLC Spotting, 0.5 mm ID, 1000 PCS
Asin: B0CLD7HD6H | Ean: 0840371309155 | UPC: 840371309155
Quality And Ease Of Use: Characterized By Fine Craftsmanship, Simplicity In Operation, Transparency, Colorlessness, And A Smooth Surface.
Warranty: 1-Year Limited Warranty; If Received Damaged, Please Contact Us Immediately; We Will Solve It Until Satisfied.
Handle With Care: Due To Their Glass Composition And Extremely Small Diameter, These Capillaries Are Fragile, So It's Important To Use Them Cautiously.
Specifications: Each Pack Contains 1000 Capillaries; Each Measuring 100 Mm In Length With An Inner Diameter (I.D.) Of 0.5 Mm.
Features
- Consistent Inner and Outer Dimensions: uniform inner and outer diameters; ideal for precise thin-layer analysis and accurate quantitative spotting; widely used in biochemical, chemical, organic, analytical and other thin layer point to represent the effects of the capillarity of a liquid substance
- Specifications: each pack contains 1000 capillaries; each measuring 100 mm in length with an inner diameter (I.D.) of 0.5 mm
- Quality and Ease of Use: characterized by fine craftsmanship, simplicity in operation, transparency, colorlessness, and a smooth surface
- Handle with Care: due to their glass composition and extremely small diameter, these capillaries are fragile, so it's important to use them cautiously
- Warranty: 1-year limited warranty; if received damaged, please contact us immediately; we will solve it until satisfied
- See more on Amazon...
Brand: stonylab | Manufacturer: StonyLab Scientific
Dimensions: 0.02 x 3.94 x 0.02 Inches | Weight: 0.01 Pounds
See On Amazon #13
Glass Capillary Tubes/Micro Pipettes TLC Spotting 0.5mm ID x 100mm 500 or 1000/pk AAdvance Instruments (500)
Asin: B07LCJ5F7J | Model: 0.5 x 100 | PartNumber: 0.5 x 100 | Ean: 5282799502780
Testing Method Used Is Placing The Tube At A Straight Up Angle With Only The Tip Submerged In The Liquid And Allowing The Liquid To Keep On Climbing Until It Stops..
Upgraded Convenient Packaging With A 1.5Mm Diameter Hole On Cap For Easy Tube Drawing Without Need To Open The Cap Or Keeping It Open All The Time..
As Shown In Photos, Approximate Spotting Volume As Tested For Dichloromethane Is 15Mm X (0.25Mm)² X 3.14 = 3Μl, For Acetone Is 25Mm X (0.25Mm)² X 3.14 = 5Μl, And For Water Is 45Mm X (0.25Mm)² X 3.14 = 9Μl..
Features
- 500 per pack capillary tubes, 0.5 mm inner diameter, 0.75 mm outer diameter, 100mm length. Made of borosilicate glass
- As shown in photos, approximate spotting volume as tested for dichloromethane is 15mm x (0.25mm) x 3.14 = 3 L, for acetone is 25mm x (0.25mm) x 3.14 = 5 L, and for water is 45mm x (0.25mm) x 3.14 = 9 L.
- Testing method used is placing the tube at a straight up angle with only the tip submerged in the liquid and allowing the liquid to keep on climbing until it stops.
- Upgraded convenient packaging with a 1.5mm diameter hole on cap for easy tube drawing without need to open the cap or keeping it open all the time.
- See more on Amazon...
Brand: AAdvance Instruments | Manufacturer: Jiyu Lab Equipment
Dimensions: 2.00 x 5.50 x 2.50 inches
See On Amazon #14
Large Capillary Tubes 100 mm x 1.3-1.5 mm ID 1.6-1.8 mm OD 140/pk Glass Micro Pipettes Both Ends Open AAdvance Instruments
Asin: B07LD9Y8GJ | Model: 1.4 x 100 | PartNumber: 1.4 x 100 | Ean: 5282799502797
As Shown In Photos, Approximate Spotting Volume As Tested For Dichloromethane Is 8Mm X (0.7Mm)² X 3.14 = 12Μl, For Acetone Is 13Mm X (0.7Mm)² X 3.14 = 20Μl, And For Water Is 25Mm X (0.7Mm)² X 3.14 = 38Μl..
Testing Method Used Is Dipping The Tube Into The Liquid At An Angle, Allowing The Liquid To Climb As Much As Possible, And Then Turning The Tube To Point Straight Down In The Air..
Convenient Packaging With 3Mm Hole On Cap For Easy Tube Drawing Without Need To Open The Cap Or Keeping It Open All The Time..
Features
- 140 or 280 per pack large glass capillary tubes, 1.3-1.5mm inner diameter, 1.6-1.8mm outer diameter, 100mm length, both ends open.
- Convenient packaging with 3mm hole on cap for easy tube drawing without need to open the cap or keeping it open all the time.
- As shown in photos, approximate spotting volume as tested for dichloromethane is 8mm x (0.7mm) x 3.14 = 12 L, for acetone is 13mm x (0.7mm) x 3.14 = 20 L, and for water is 25mm x (0.7mm) x 3.14 = 38 L.
- Testing method used is dipping the tube into the liquid at an angle, allowing the liquid to climb as much as possible, and then turning the tube to point straight down in the air.
- See more on Amazon...
Brand: AAdvance Instruments | Manufacturer: AAdvance Instruments
See On Amazon #15
Labasics Glass Capillary Tubes, 100 mm Micro Glass Pipettes Capillary Transfer Tube with 0.3 mm ID and 0.5 mm OD for TLC Spotting, Pack of 1000
Asin: B0BJ2LZ79V | Ean: 0843798188990 | UPC: 843798188990
Inner Diameter (Id): 0.3 Mm; Outer Diameter (Od): 0.5 Mm.
Warranty: Labasics 1-Year Limited Warranty; If Received Damaged, Please Contact Us Immediately; We Will Solve It Until Satisfied.
Pack Of 1000.
Length: 100 Mm.
Features
- Labasics glass capillary tubes are widely used in biochemical, chemical, organic, analytical and other thin layer point to represent the effects of the capillarity of a liquid substance
- Length: 100 mm
- Inner Diameter (ID): 0.3 mm; Outer Diameter (OD): 0.5 mm
- Pack of 1000
- Warranty: Labasics 1-year limited warranty; if received damaged, please contact us immediately; we will solve it until satisfied
- See more on Amazon...
Brand: Labasics | Manufacturer: Labasics Scientific
Dimensions: 39.37 x 0.20 x 0.20 inches
See On Amazon #16
Melting Point Tubes One End Sealed 100 mm x 1.3-1.5 mm ID 1.6-1.8 mm OD 280/pk Glass Capillary Micro Pipettes One End Open AAdvance Instruments
Asin: B07LCMMHP1 | Model: 1.4 x 100 Sealed | PartNumber: 1.4 x 100 Sealed | Ean: 5282799502728
Convenient Packaging With 3Mm Hole On Cap For Easy Tube Drawing Without Need To Open The Cap Or Keeping It Open All The Time..
Features
- 280 per pack melting point tubes with one end sealed and one end open. 1.3-1.5mm inner diameter, 1.6-1.8mm outer diameter, 100mm length.
- Convenient packaging with 3mm hole on cap for easy tube drawing without need to open the cap or keeping it open all the time.
- See more on Amazon...
Brand: AAdvance Instruments | Manufacturer: AAdvance Instruments
See On Amazon #17
True 851135 Cap Tube .087OD x.036ID x 10.5
Asin: B005MRWFKO | Model: 851135 | PartNumber: 851135 | Ean: 0046843303151 | UPC: 046843303151
Country Of Origin : United States.
Part Number: 851135.
Package Weight: 1.11 Pounds.
Features
- Package Dimensions: 5.01 L x 9.01 H x 6.01 W (inches)
- Package Weight: 1.11 pounds
- Country of Origin : United States
- Part Number: 851135
- See more on Amazon...
First Available: 10/12/2016
Brand: TRUE | Manufacturer: True
Weight: 0.21 pounds
See On Amazon #18
USAMILY Stainless Steel Capillary Lab Tube Tubing 8Pcs, Outer Diameter 0.5 to 12mm, Internal Diameter 0.2 to 10mm, Length 300mm
Asin: B09WQZH95X | Model: 06-024-001 | PartNumber: 06-024-001 | Ean: 0717186031642 | UPC: 717186031642
Inner Diameter: 0.2Mm/0.4Mm/1.4Mm/3Mm/4Mm/6Mm/8Mm / 10Mm.
Stainless Steel Capillary Tube Is A Good Choice For Most Applications Due To Greater Corrosion Resistance And Precision.
One For Each Specification, 8Pcs Tubes In Total.
Outer Diameter: 0.5Mm / 1Mm / 2Mm /4Mm/6Mm/8Mm/10Mm/12Mm.
Features
- Material: Stainless Steel
- Outer Diameter: 0.5mm / 1mm / 2mm /4mm/6mm/8mm/10mm/12mm
- Inner Diameter: 0.2mm/0.4mm/1.4mm/3mm/4mm/6mm/8mm / 10mm
- One for each specification, 8Pcs tubes in total
- Stainless Steel Capillary Tube is a good choice for most applications due to greater corrosion resistance and precision
- See more on Amazon...
Brand: USAMILY | Manufacturer: USAMILY
See On Amazon #19
Eisco Labs Borosilicate Glass Capillary Melting Tubes, 4-Inch, Open Both Ends, 0.2mm Wall Thickness - Pack of 100 for Laboratory Use
Asin: B011CWZG8U | Model: CH0882A | PartNumber: CH0882A | Ean: 0849230062453 | UPC: 849230062453
Borosilicate Glass | Made From High-Quality, Durable Borosilicate Glass, Ensuring Resistance To Thermal Shock And Chemical Corrosion..
Versatile Applications | Ideal For Melting Point Determination, Sample Storage, Microscale Experiments, And Various Laboratory Uses..
Pack Of 100 | Bulk Pack Provides Ample Supply For Laboratories, Educational Settings, And Research Facilities, Ensuring Long-Term Availability..
Open Both Ends | Designed For Easy Filling And Cleaning, Suitable For Repeated Use In Scientific Experiments And Tests..
Features
- PRECISE MEASUREMENT | 4-inch long capillary tubes with 0.2mm wall thickness for accurate substance melting point determination.
- OPEN BOTH ENDS | Designed for easy filling and cleaning, suitable for repeated use in scientific experiments and tests.
- BOROSILICATE GLASS | Made from high-quality, durable borosilicate glass, ensuring resistance to thermal shock and chemical corrosion.
- PACK OF 100 | Bulk pack provides ample supply for laboratories, educational settings, and research facilities, ensuring long-term availability.
- VERSATILE APPLICATIONS | Ideal for melting point determination, sample storage, microscale experiments, and various laboratory uses.
- See more on Amazon...
Brand: EISCO | Manufacturer: Eisco
Dimensions: 4.00 x 6.00 x 4.00 inches
See On Amazon #20
Glass Capillary Tubes 0.5mm ID x 100mm, TLC Spotting Micro Pipettes, Pack of 500
Asin: B0CDNFP6MS
Used For Tlc Separation Or Melting Point Analysis For Aqueous And Organic Solutions.
Consistent Dimensions Of Tubes To Allow For Constant And Precise Volume Filling, Reducing Spotting Volume Variations Between Samples.
Disposable, Ends Can Be Sealed By Flame.
Packaged In A Sturdy Resealable Tube To Ensure That Capillary Tubes Arrive Clean And Undamaged.
Features
- High-quality product to ensure that both ends are open with no flat edges, allowing for easy sampling and spotting
- Packaged in a sturdy resealable tube to ensure that capillary tubes arrive clean and undamaged
- Used for TLC separation or melting point analysis for aqueous and organic solutions
- Disposable, ends can be sealed by flame
- Consistent dimensions of tubes to allow for constant and precise volume filling, reducing spotting volume variations between samples
- See more on Amazon...
Brand: J&K | Manufacturer: J&K Scientific
See On Amazon #21
8pcs OD 1.5mm ID 0.9mm Length 250mm 304 Stainless Steel Capillary Tube
Asin: B07DKXSSH2 | Model: 0.9mm | PartNumber: 0.9mm | Ean: 0755320647298 | UPC: 755320647298
Outer Diameter: 1.5Mm; Inner Diameter: 0.9Mm.
Package Included: 8 X 304 Stainless Steel Capillary Tube.
Wall Thickness: 0.3Mm; Length: 250Mm(9.84").
Material Type: 304 Stainless Steel.
Features
- Shape: Capillary Tube
- Material Type: 304 Stainless Steel
- Outer Diameter: 1.5mm; Inner Diameter: 0.9mm
- Wall thickness: 0.3mm; Length: 250mm(9.84)
- Package included: 8 x 304 Stainless Steel Capillary Tube
- See more on Amazon...
Brand: Yodaoke | Manufacturer: Yodaoke
See On Amazon #22
4pcs OD 6mm ID 4mm Length 250mm 304 Stainless Steel Capillary Tube
Asin: B07DKXYF97 | Model: 4mm | PartNumber: 4mm | Ean: 0755320647274 | UPC: 755320647274
Outer Diameter: 6Mm; Inner Diameter: 4Mm.
Package Included: 4 X 304 Stainless Steel Capillary Tube.
Wall Thickness: 1Mm; Length: 250Mm(9.84").
Material Type: 304 Stainless Steel.
Features
- Shape: Capillary Tube
- Material Type: 304 Stainless Steel
- Outer Diameter: 6mm; Inner Diameter: 4mm
- Wall thickness: 1mm; Length: 250mm(9.84)
- Package included: 4 x 304 Stainless Steel Capillary Tube
- See more on Amazon...
Brand: Yodaoke | Manufacturer: Yodaoke
See On Amazon #23
5pcs 304 Stainless Steel Capillary Tube Silver Tubes 3mm OD 2mm ID 250mm Length
Asin: B074SMYK8X | Ean: 0728897039223 | UPC: 728897039223
Easy To Be Formed Or Welded With Common Tools..
Products Are Mainly Used For: Aviation, Antenna, Model Industry, Chemical Industry, Machinery And Some Home Decoration..
Rust Protection, Wear-Resisting, Polished Surface, Well Straightness, Seamless..
Has Good Hot And Cold Workability..
Features
- Corrosion and oxidation resistant, high temperature resistant.
- Has good hot and cold workability.
- Easy to be formed or welded with common tools.
- Rust protection, Wear-resisting, Polished surface, Well straightness, Seamless.
- Products are mainly used for: aviation, antenna, model industry, chemical industry, machinery and some home decoration.
- See more on Amazon...
Brand: Single Mom | Manufacturer: The Single Mom Center
See On Amazon #24
1~20pcs 304 Stainless Steel Round Capillary OD 0.3~12mm ID 0.1~11mm Length 250mm~500mm Long Seamless Straight Tube (Size : 250mm, Color : OD 16 x ID 14mm 1pcs)
Asin: B0D1FSHVQK | Model: BMFHAO | PartNumber: BMFHAO | Ean: 9088954429635
Smooth Surface:Select Excellent Materials, Smooth Surface Without Burrs, And Strive For Perfection.Seamless Pressing And Integrated Molding, Smooth Surface, No Joints, Light And Convenient For Replacement And Maintenance. Easy To Install..
Stainless Steel Round Tubes Wide Scope Of Application:Air Conditioning Pipe, Mechanical Manufacturing, Steel Structure Engineering, Oil And Gas Chemical Pipe,Ect..Commonly Used In Industry, Ship Model, Handicrafts, Pipelines, Mechanical Structural Components, Etc. Especially In Living Decoration And Industry, Such As Frames, Crafts, Gardening Products, Railings, Shop Fitting And Furniture..
Precise Meticulous:Precise Cutting, Smooth Cut, Good High-Temperature Processing Performance.It Can Be Cut And Punched According To The Length You Need, And You Can Use Suitable Equipment For Welding..
Specifications Standards:Strict Specifications And Standards Shall Be Implemented For Pipes. Strictly Control The Thickness, Outer Diameter And Length.Please Check The Size Carefully Before Purchasing..
Features
- Stainless Steel Capillary Tube Made of 304 stainless steel material, High temperature resistance, corrosion resistance, oxidation resistance, no burr.
- Specifications standards:Strict specifications and standards shall be implemented for pipes. Strictly control the thickness, outer diameter and length.Please check the size carefully before purchasing.
- Smooth surface:Select excellent materials, smooth surface without burrs, and strive for perfection.Seamless pressing and integrated molding, smooth surface, no joints, light and convenient for replacement and maintenance. Easy to install.
- Precise meticulous:Precise cutting, smooth cut, good high-temperature processing performance.It can be cut and punched according to the length you need, and you can use suitable equipment for welding.
- Stainless Steel Round Tubes Wide scope of application:Air conditioning pipe, mechanical manufacturing, steel structure engineering, oil and gas chemical pipe,ect..Commonly used in industry, ship model, handicrafts, pipelines, mechanical structural components, etc. Especially in living decoration and industry, such as frames, crafts, gardening products, railings, shop fitting and furniture.
- See more on Amazon...
Brand: BMFHAO | Manufacturer: BMFHAO
Weight: 0.44 pounds
See On Amazon #25
200pcs Glass Capillary Tubes, 75 mm Micro Glass Capillary Tubes Glass Pipettes Capillary Transfer Tube with 1.1 mm ID and 1.5 mm OD for Lab Capillary Tubes
Asin: B0CZ3HV1R7 | Model: JAOTONGBO | PartNumber: JAOTONGBO | Ean: 4336885815962
1.1 Mm Inner Diameter And 1.5 Mm Outer Diameter.
Compatible With Lab Capillary Tubes.
Pack Of 100 Capillary Tubes For Long-Lasting Use.
75 Mm Length, Suitable For Various Lab Applications.
Features
- Made of high-quality glass material
- 75 mm length, suitable for various lab applications
- 1.1 mm inner diameter and 1.5 mm outer diameter
- Pack of 100 capillary tubes for long-lasting use
- Compatible with lab capillary tubes
- See more on Amazon...
Brand: JAOTONGBO | Manufacturer: JAOTONGBO
Weight: 0.22 pounds
See On Amazon #26
200pcs Glass Capillary Tubes, 75 mm Micro Glass Capillary Tubes Glass Pipettes Capillary Transfer Tube with 1.1 mm ID and 1.5 mm OD for Lab Capillary Tubes
Asin: B0CYZSX3QG | Model: FAETOR | PartNumber: FAETOR | Ean: 4336885814903
1.1 Mm Inner Diameter And 1.5 Mm Outer Diameter.
Compatible With Lab Capillary Tubes.
Pack Of 100 Capillary Tubes For Long-Lasting Use.
75 Mm Length, Suitable For Various Lab Applications.
Features
- Made of high-quality glass material
- 75 mm length, suitable for various lab applications
- 1.1 mm inner diameter and 1.5 mm outer diameter
- Pack of 100 capillary tubes for long-lasting use
- Compatible with lab capillary tubes
- See more on Amazon...
Brand: FAETOR | Manufacturer: FAETOR
Weight: 0.22 pounds
See On Amazon #27
Glass Capillary Tubes, 100 mm Micro Glass Capillary Tubes Glass Pipettes Capillary Transfer Tube with 0.3 mm ID and 0.5 mm OD for TLC Spotting Lab Capillary Tubes, Pack of 1000 (Size : 0.3x100mm 1000
Asin: B0CYWR9YC2 | Model: ZYDADA | PartNumber: ZYDADA | Ean: 4336885813258
Pack Of 1000 For Long-Lasting Use, Convenient And Cost-Effective.
Durable And Reliable, Suitable For Precise Liquid Measurements.
Compatible With Various Laboratory Equipment And Instruments.
Ideal For Tlc Spotting In Laboratories, Capillary Transfer And Liquid Handling.
Features
- High-quality glass material, 100 mm length, 0.3 mm inner diameter, 0.5 mm outer diameter
- Ideal for TLC spotting in laboratories, capillary transfer and liquid handling
- Pack of 1000 for long-lasting use, convenient and cost-effective
- Compatible with various laboratory equipment and instruments
- Durable and reliable, suitable for precise liquid measurements
- See more on Amazon...
Brand: ZYDADA | Manufacturer: ZYDADA
Weight: 0.44 pounds
See On Amazon #28
Glass Capillary Tubes, 75 mm Micro Glass Capillary Tubes Glass Pipettes Capillary Transfer Tube with 1.1 mm ID and 1.5 mm OD for Lab Capillary Tubes, 200pcs
Asin: B0CYWV3BSS | Model: ZYDADA | PartNumber: ZYDADA | Ean: 4336885813197
Pack Of 200 Tubes, Sufficient Quantity For Long-Term Use.
Compatible With Various Laboratory Equipment And Instruments.
Durable And Reusable, Easy To Clean And Sterilize.
Ideal For Laboratory Use, Capillary Transfer Of Liquids, And Micro-Dispensing.
Features
- High-quality glass material, 75mm length, 1.1mm inner diameter, 1.5mm outer diameter
- Ideal for laboratory use, capillary transfer of liquids, and micro-dispensing
- Pack of 200 tubes, sufficient quantity for long-term use
- Durable and reusable, easy to clean and sterilize
- Compatible with various laboratory equipment and instruments
- See more on Amazon...
Brand: ZYDADA | Manufacturer: ZYDADA
Dimensions: 0.10 x 2.95 x 0.04 inches | Weight: 0.22 pounds
See On Amazon #29
Glass Capillary Tubes, 100 mm Micro Glass Capillary Tubes Glass Pipettes Capillary Transfer Tube with 0.5 mm ID and 0.75 mm OD for TLC Spotting Lab Capillary Tubes, Pack of 1000 (Size : 0.5x100mm 100
Asin: B0CYWT7ZX5 | Model: ZYDADA | PartNumber: ZYDADA | Ean: 4336885813227
Pack Of 1000 For Long-Lasting Use, Convenient And Cost-Effective.
Durable And Reliable, Suitable For Precise Liquid Measurements.
Compatible With Various Laboratory Equipment And Instruments.
Ideal For Tlc Spotting In Laboratories, Capillary Transfer And Liquid Handling.
Features
- High-quality glass material, 100 mm length, 0.5 mm inner diameter, 0.75 mm outer diameter
- Ideal for TLC spotting in laboratories, capillary transfer and liquid handling
- Pack of 1000 for long-lasting use, convenient and cost-effective
- Compatible with various laboratory equipment and instruments
- Durable and reliable, suitable for precise liquid measurements
- See more on Amazon...
Brand: ZYDADA | Manufacturer: ZYDADA
Weight: 0.44 Pounds
See On Amazon #30
2pcs OD 9mm ID 8mm Length 250mm 304 Stainless Steel Capillary Tube
Asin: B07DKTMYGY | Model: 8mm | PartNumber: 8mm | Ean: 0755320647243 | UPC: 755320647243
Outer Diameter: 9Mm; Inner Diameter: 8Mm.
Package Included: 2 X 304 Stainless Steel Capillary Tube.
Wall Thickness: 0.5Mm; Length: 250Mm(9.84").
Material Type: 304 Stainless Steel.
Features
- Shape: Capillary Tube
- Material Type: 304 Stainless Steel
- Outer Diameter: 9mm; Inner Diameter: 8mm
- Wall thickness: 0.5mm; Length: 250mm(9.84)
- Package included: 2 x 304 Stainless Steel Capillary Tube
- See more on Amazon...
Brand: Yodaoke | Manufacturer: Yodaoke
See On Amazon
Looking For Something Else?
Search