Best set screw couplings - Buying Guide
Last Updated: 04/23/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
4Pcs 8mm Flange Coupling Connector, Rigid Guide Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors
Asin: B08335MYGW | Model: H420*4 | PartNumber: H420*4
Size:Inner Diameter: 8Mm,Height:13Mm,Fixed Hole Screw: M4..
Package Included:4Pcs 8Mm Flange Shaft Coupling + 1Pcs M4 Mini Hex Wrench + 8 X M4 Fastening Screw.
Widely Use: Used In Model Shaft Connection, Perfect Accessories For Rc Model Motor..
Features
- Durable Material: The coupling connector is made of 45# steel( it is better than copper and aluminum alloys ), heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement.
- Widely use: used in model shaft connection, perfect accessories for RC Model motor.
- Size:Inner Diameter: 8mm,Height:13mm,Fixed Hole Screw: M4.
- Package included:4Pcs 8mm Flange Shaft Coupling + 1Pcs M4 Mini Hex Wrench + 8 x M4 Fastening Screw
- See more on Amazon...
Brand: daier | Manufacturer: daier
See On Amazon #2
uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 Stainless Steel,Shaft Coupler Connector for 3D Printers, Motor Accessories,2pcs
Asin: B07P5YZKY5
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 1.97 x 1.18 Inches
See On Amazon #3
Luomorgo 7mm/0.28 inch Metal Flange Shaft Coupling Rigid Flange Coupling Motors Guide Shaft Axis Bearing 2pcs
Asin: B07HK8LQWC | Ean: 0719889047791 | UPC: 719889047791
Use: Suitable For Model Shaft Connection, Perfect Accessories For Rc Model Motor, Etc..
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily..
Metal: Fine Plating Metal, Hardened By Heat Treatment, And Then Electroplated..
Inner Diameter: 7Mm/0.28 Inch; Base Diameter: 32Mm/1.26 Inch; Base Height: 3Mm/0.12 Inch.
Features
- Cylinder Outer Diameter: 16mm/0.6 inch; Cylinder Height: 10mm/0.39 inch
- Inner Diameter: 7mm/0.28 inch; Base Diameter: 32mm/1.26 inch; Base Height: 3mm/0.12 inch
- Use: Suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Metal: Fine plating metal, hardened by heat treatment, and then electroplated.
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily.
- See more on Amazon...
Brand: Luomorgo | Manufacturer: Luomorgo
See On Amazon #4
BRINGSMART 2pcs 6mm Flange Coupling Connector with Wrench Rigid Axis Model Coupler High Hardness Shaft Fitting for DIY Parts JGY370 JGB37-520X
Asin: B0C9Q51FTS | Model: YMX00011 | PartNumber: YMX00011 | Ean: 0616314664496 | UPC: 616314664496
[Durable Material] Coupling Connector Is Made Of Fine Plating Steel, Heat And Electroplated Process Make It Sturdiness And Insulation, Striking Shaft More Stable. Its Hardness Is More Better Than Ordinary Copper And Aluminum Alloy Material..
[Satisfaction Guarantee] Flange Coupler Is Produced Based On International Flange Standard. Compact Structure And Small Size. It Can Effectively Ensure The Alignment Of Two Shafts..
[Wide Usage] Anti-Oil And Anti-Rust. Easy For Installment And Replacement. Widely Used In Model Shaft Connection, Perfect Accessories For Rc Model Motor..
[Package Contents] 2Pcs 6Mm Inner Diameter Flange Couplings, 8Pcs M3 Screws, 1Pcs Wrench..
Features
- [Coupling Size] Inner Diameter: 0.24''. Fastening Screw Hole: M3. Cylinder Outer Diameter: 0.39''. Base Diameter: 0.87''. Total Height: 0.47''.
- [Package Contents] 2pcs 6mm inner diameter flange couplings, 8pcs M3 screws, 1pcs wrench.
- [Durable Material] Coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable. Its hardness is more better than ordinary copper and aluminum alloy material.
- [Wide Usage] Anti-oil and anti-rust. Easy for installment and replacement. Widely used in model shaft connection, perfect accessories for RC Model motor.
- [Satisfaction Guarantee] Flange coupler is produced based on International Flange Standard. Compact structure and small size. It can effectively ensure the alignment of two shafts.
- See more on Amazon...
Brand: BRINGSMART | Manufacturer: BRINGSMART
Dimensions: 0.47 x 4.72 x 3.94 Inches
See On Amazon #5
Zeberoxyz 2PCS Shaft Coupling 5mm to 8mm Aluminum Alloy Joint 25mm Length 20mm Diameter Stepper Motor Connector Rigid Coupler for 3D Printer CNC Machine DIY Model (5x8mm
Asin: B08ZJ854Z6 | Ean: 0791783537158 | UPC: 791783537158
Feature: Screw Type(Coiling Clamping),They Are Not Easy To Loosen,Main Color: Silver Tone.
Widely Used: Used For Transmit Motion And Widely Used In Diy Model Such As Small Cnc Machines, 3D Printer Z Shaft Coupling , Car Or Boat Etc. As Connector For Different Parts As Joint Connector.
Function: Provides Torque Transmision And Alignment, Cost Effective Coupling Design.
Material: Made Of Aluminium Alloy Material, Light, Anti-Oxidant, And Anti-Corrosive, Delicate Cnc Cut With Outstanding Appearance, High Precision Fine Workmanship,Long Service Life.
Features
- Shaft Coupling Size:L25mm x D20mm/0.98inch x 0.79inch( L*D), Bore Diameter: 5mm to 8mm / 0.19inch to 0.31inch, Shaft Range: 5mm to 8mm / 0.19 to 0.31 inch
- Material: Made of aluminium alloy material, light, anti-oxidant, and anti-corrosive, delicate CNC cut with outstanding appearance, high precision fine workmanship,long service life
- Feature: Screw Type(Coiling Clamping),They are not easy to loosen,Main Color: Silver tone
- Function: Provides torque transmision and alignment, Cost effective coupling design
- Widely Used: Used for transmit motion and widely used in DIY model such as small CNC machines, 3d printer Z shaft coupling , car or boat etc. as connector for different parts as joint connector
- See more on Amazon...
Brand: Zeberoxyz | Manufacturer: Zeberoxyz
Dimensions: 0.71 x 9.84 x 0.00 Inches | Weight: 0.07 pounds
See On Amazon #6
uxcell 5mm to 5mm Bore Rigid Coupling Set Screw L20XD12 Aluminum Alloy,Shaft Coupler Connector for RC Airplane Boat, Motor Accessories,Red,2pcs
Asin: B07P6X9GSQ
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 5mm to 5mm, Total Length: 20mm /0.78 inch, Outside Diameter : 12mm/ 0.47 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.97 x 1.18 inches
See On Amazon #7
Mrosnail 4Pcs 8mm Flange Coupling Connector, Rigid Shaft Axis Fittings, Electroplated & High Hardness Heat-Treated for DIY RC Model Motors
Asin: B0CSVZQHZY
[Versatile Application]: Perfectly Suited For A Wide Range Of Diy Projects, These Couplers Are An Essential Component In Building Or Repairing Rc Model Motors, Offering Versatility And Ease Of Use For Hobbyists And Professionals Alike..
[Enhanced Stability And Alignment]: The Robust Construction Of Mrosnail Couplers Ensures Excellent Shaft Alignment And Stability, Minimizing Vibration And Wear, And Prolonging The Lifespan Of Your Rc Model Motors..
[Easy Installation]: Each Set Includes 4 Flange Coupling Connectors, Ensuring A Hassle-Free Installation. The Precision-Engineered Design Allows For Quick And Efficient Assembly, Making It User-Friendly For All Skill Levels..
[Precision Engineering]: These Rigid Shaft Axis Fittings Are Designed With Meticulous Attention To Detail, Offering A Secure And Stable Connection For Model Motor Shafts, Enhancing Performance And Reliability..
Features
- [Premium Quality Material]: Mrosnail's 8mm flange coupling connectors are crafted from electroplated, heat-treated steel, ensuring unparalleled durability and high hardness. Ideal for rigorous use in DIY RC model motors.
- [Precision Engineering]: These rigid shaft axis fittings are designed with meticulous attention to detail, offering a secure and stable connection for model motor shafts, enhancing performance and reliability.
- [Versatile Application]: Perfectly suited for a wide range of DIY projects, these couplers are an essential component in building or repairing RC model motors, offering versatility and ease of use for hobbyists and professionals alike.
- [Easy Installation]: Each set includes 4 flange coupling connectors, ensuring a hassle-free installation. The precision-engineered design allows for quick and efficient assembly, making it user-friendly for all skill levels.
- [Enhanced Stability and Alignment]: The robust construction of Mrosnail couplers ensures excellent shaft alignment and stability, minimizing vibration and wear, and prolonging the lifespan of your RC model motors.
- See more on Amazon...
Brand: Mrosnail | Manufacturer: Mrosnail
See On Amazon #8
Magic&shell 2-Pack 8mm Flange Shaft Coupling High Hardness Metal Axis Bearing Fittings DIY Model Accessory Rigid Flange Guide Shaft Coupler Motor Connector
Asin: B07FLTKK8B | Ean: 0705883157284 | UPC: 705883157284
Metal: Fine Plating Metal, Hardened By Heat Treatment, And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
Package: 2 X 8Mm Flange Shaft Coupling + 1 X M4 Mini Hex Wrench + 4 X M4 Fastening Screw.
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily..
Inner Diameter: 8Mm, Cylinder Outer Diameter: 16Mm, Cylinder Height: 10Mm, Base Diameter: 32Mm, Base Height: 3Mm, Fastening Screw Hole: M4, Base Fixing Screw Hole: M4.
Features
- Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Inner Diameter: 8mm, Cylinder Outer Diameter: 16mm, Cylinder Height: 10mm, Base Diameter: 32mm, Base Height: 3mm, Fastening Screw Hole: M4, Base Fixing Screw Hole: M4
- Metal: Fine plating metal, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily.
- Package: 2 x 8mm Flange Shaft Coupling + 1 x M4 Mini Hex Wrench + 4 x M4 Fastening Screw
- See more on Amazon...
Brand: Magic&shell | Manufacturer: AUGYUESS
See On Amazon #9
QCDENG 10pcs 5mm to 5mm Brass Shaft Coupling Joint Connector, Motor Shaft Extension Connector
Asin: B0B1PHQ313 | Model: QCQIANG | PartNumber: QCQIANG
🛒Packing List: 10 X Motor Shaft Coupling Connector 2 X Allen Wrench 40 X Screws.
🛒Application: With Wrench And Screw, Widely Used In Various Motors.
🛒Product Usage: Connect Two Shafts Of Different Specifications To Achieve The Purpose Of Changing Shafts.
🛒Size: 5Mm To 5Mm.
Features
- Material: Made of high-quality brass, high temperature resistance, corrosion resistance and oil resistance, long service life
- Size: 5mm to 5mm
- Packing list: 10 x Motor Shaft Coupling Connector 2 x Allen Wrench 40 x Screws
- Product Usage: Connect two shafts of different specifications to achieve the purpose of changing shafts
- Application: With wrench and screw, widely used in various motors
- See more on Amazon...
Brand: QCDENG | Manufacturer: QCQIANG
Warranty: 1 year warranty
See On Amazon #10
4Pcs 5mm Rigid Flange Shaft Coupling, Guide Shaft Support Coupler High Hardness Metal Axis Bearing Fittings Motor Connector
Asin: B07L1FMBBC | Ean: 0666354110583 | UPC: 666354110583
Cylinder Size (Idxodxh): 5X10x10mm, Base Size: 22Mm Fastening Screw Hole: M3, Base Fixing Screw Hole: M3.
Flange Shaft Coupling For Connection Of Model Shaft To Rc Model Motor, Etc..
It Is Easy To Mount Other Components On The Shaft..
Made Of Metal, Surface Electroplated..
Features
- package includes: 4 pcs 5mm Flange Shaft Coupling with 8 Screws, 4 pcs Allen Wrench, 16 stainless steel Screws
- Made of metal, surface electroplated.
- Cylinder Size (IDxODxH): 5x10x10mm, Base Size: 22mm Fastening Screw Hole: M3, Base Fixing Screw Hole: M3
- It is easy to mount other components on the shaft.
- Flange shaft coupling for connection of model shaft to RC model motor, etc.
- See more on Amazon...
Brand: Hamineler | Manufacturer: Hamineler
Dimensions: 0.47 x 3.15 x 3.15 inches
See On Amazon #11
uxcell 8mm Inner Dia H13*D16 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts
Asin: B07PFWRC1J | Model: a18121800ux0642 | PartNumber: a18121800ux0642
Material: Aluminum Alloy, Hardened By Heat Treatment, And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
Package: 2 X 8Mm Flange Shaft Coupling, 4 X Fastening Screw( M4 Hex Wrench Not Included Here ).
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly..
Type: Flange Shaft Coupling, Suitable For Model Shaft Connection, Perfect Accessories For Rc Model Motor, Etc..
Features
- Inner Diameter: 8mm/0.31 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 16mm/0.63 inch, Cylinder Height: 10mm/1.31 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 24mm/0.94 inch,2 x M4 Fastening Screws
- Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Material: Aluminum Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.
- Package: 2 x 8mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here )
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.97 x 1.18 inches
See On Amazon #12
2 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver. (2 pcs 8mm)
Asin: B0822425TT | Model: YJ0274MAT2-AN-CA | PartNumber: YJ0274MAT2-AN-CA | Ean: 0717877040137 | UPC: 717877040137
【Wide Range Of Use】Ancirs Flange Coupler Is Produced Based On International Flange Standard, Widely Used In Model Shaft Connection, Perfect Accessories For Rc Model Motor..
【Package Include】Ancirs Flange Coupler Is Packaged With 2 Pack 8Mm Flange Shaft Coupling + 2X M3 Mini Hex Wrench + 4 X M3 Fastening Screw..
【Standard Specification】Inner Diameter: 8Mm. Cylinder Outer Diameter: 10Mm. Cylinder Height: 10Mm. Base Diameter: 32Mm. Base Height: 2Mm..
Features
- Reliable Material Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement.
- Standard Specification Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 32mm. Base Height: 2mm.
- Wide Range of Use Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor.
- Package Include Ancirs flange coupler is packaged with 2 pack 8mm Flange Shaft Coupling + 2x M3 Mini Hex Wrench + 4 x M3 Fastening Screw.
- See more on Amazon...
Brand: ANCIRS | Manufacturer: ANCIRS
See On Amazon #13
Sydien 4Pcs 8mm Rigid Flange Shaft Coupling Motor Guide Shaft Coupler Connector with Set Screws & Wrench
Asin: B07R8CJ36F | Ean: 0745679813604 | UPC: 745679813604
👍High Quality:Made Of Fine Plating Steel Which Is Hardened By Heat Treatment And Electroplated.Its Hardness Is More Better Than Ordinary Copper And Aluminum Alloy Material. Anti-Oil And Anti-Rust..
👍Excellent Performance:Compact Structure And Small Size.It Can Effectively Ensure The Alignment Of Two Shafts..
👍Widely Use:Suitable For Model Shaft Connection,Perfect Accessories For Rc Model Motor,Etc..
👍Low Inertia:Flange Shaft Couplings Is So Highly Sensitive That Can Quickly Switch The Working State..
👍Inner Diameter:8Mm/0.31''.Fastening Screw Hole:M4.Base Fixing Screw Hole:M4.Cylinder Outer Diameter:16Mm/0.63''.Cylinder Height:10Mm/0.39''.Base Diameter:32Mm/1.26''.Base Height:3Mm/0.12''..
Features
- Package Content:4Pcs Flange Shaft Couplings with 1Pc Mini Hex Wrench with Some Fastening Screws.
- Inner Diameter:8mm/0.31''.Fastening Screw Hole:M4.Base Fixing Screw Hole:M4.Cylinder Outer Diameter:16mm/0.63''.Cylinder Height:10mm/0.39''.Base Diameter:32mm/1.26''.Base Height:3mm/0.12''.
- HIGH QUALITY:Made of fine plating steel which is hardened by heat treatment and electroplated.Its hardness is more better than ordinary copper and aluminum alloy material. Anti-oil and anti-rust.
- LOW INERTIA:Flange shaft couplings is so highly sensitive that can quickly switch the working state.
- EXCELLENT PERFORMANCE:Compact structure and small size.It can effectively ensure the alignment of two shafts.
- WIDELY USE:Suitable for model shaft connection,perfect accessories for RC model motor,etc.
- See more on Amazon...
Brand: Sydien | Manufacturer: Sydien
Dimensions: 0.00 x 0.00 x 1.26 inches
See On Amazon #14
8mm to 10mm Bore Rigid Coupling Set Joint with Screw Wrench L22XD16 Stainless Steel,Shaft Coupler Connector for 3D Printers, Motor Accessories,2pcs
Asin: B0BZLLMHRS
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Top Tight Type Rigid Coupling, High Torque With Rigidity, Low Inertia, And Excellent Sensitivity.No Rotation Gap And Elastic Action Can Make Up For Symmetrical Angular Misalignment..
The Shaft Coupler Connector Is Mainly Used To Connect The Shaft Of The Motor And The Fully Threaded Rod To Ensure The Normal Operation Of The Machine. Mainly Used For 3D Printers, Diy Model Cars, Model Boats, Model Airplane..
Features
- The rigid Coupling, we provide here, are in the size of: Material: Stainless Steel; Color: Silver; Screws Size: M4*0.7; Bore size: 8mm to 10mm/0.32inch to 0.39inch; Total Size: 22mm x 16mm/0.87inch x 0.63inch(L*D)
- The shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity.No rotation gap and elastic action can make up for symmetrical angular misalignment.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: LULUQUEEN | Manufacturer: LULUQUEEN
Dimensions: 0.63 x 0.87 x 0.63 inches | Weight: 0.06 Pounds
See On Amazon #15
6Pack Treehobby Aluminium Alloy Shaft Coupling Rigid Stepper Motor Wheel Coupler Joint Connector for DIY Car Boat Airplane 3D Printers, 6mm to 6mm
Asin: B07QPJLQNH | Model: AS015C | PartNumber: AS015C | Ean: 0763846886664 | UPC: 763846886664
Size: 25 X 14Mm/0.98" X 0.55"(L*Dia).
Material: Aluminum Alloy.
Flex Capability Of The Coupler Removes Stress When Shafts Are Not Aligned Perfectly.Widely Used In Hardware,Diy Model,Robot,3D Printers And The Occasion Of The Mechanical.
Features
- Suitable for connecting two axis with different diameters, can also be connected with a motor axis, or connecting shafts of different diameters.
- Flex capability of the coupler removes stress when shafts are not aligned perfectly.Widely used in hardware,DIY model,robot,3D Printers and the occasion of the mechanical
- Size: 25 x 14mm/0.98 x 0.55(L*Dia)
- Material: Aluminum Alloy
- See more on Amazon...
Brand: Treehobby | Manufacturer: ZYCST
Dimensions: 0.98 x 0.55 x 0.55 inches | Weight: 0.10 pounds
See On Amazon #16
Bringsmart Mounting Bracket of Worm Gear Motor with Screw Motor Mini Motor Support for Fixed Motor Running Smoothly (Bracket)
Asin: B07BWDKLFV | Model: JGY-370 | PartNumber: JGY-370 | Ean: 0608651617884 | UPC: 608651617884
D Shaped Output Shaft, Using High Hardness Steel, Good Toughness, Impact Resistance, The Quality Of The Bearing And The Service Life Of The Turbo Worm Gear Motor Are Improved, Extremely Durable.
Application: Label Machines, Remote Control Curtains, Automatic Voltage Regulators, Barbecue Grills, Ovens, Washers, Waste Disposal Machines, Household Appliances, Coin Machines, Paper Currency Recognizers, Automatic Actuators, Coffee Machines, Towel Machines, Printing Machines And Stage Lighting. This Section Is Suitable For Small Motor Configuration High Speed Ratio, The Installation Space Is Limited Occasions, Large Torque Output..
Gear Dc Motor With Micro-Turbine Worm, You Can Change The Wiring-Connection To Change Motor Rotation. Low Noise And High Torque..
All-Metal Gears, High-Temperature Resistance, High Abrasion Resistance, Strong Load Capacity, Sturdy And Durable, Effectively Protect The Turbo Worm Gear Box Motor Body..
Features
- JGY-370
- ALL-METAL GEARS, high-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the turbo worm gear box motor body.
- D SHAPED OUTPUT SHAFT, using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the turbo worm gear motor are improved, extremely durable
- GEAR DC MOTOR with MICRO-TURBINE WORM, you can change the wiring-connection to change motor rotation. Low noise and high torque.
- Application: Label machines, remote control curtains, automatic voltage regulators, barbecue grills, ovens, washers, waste disposal machines, household appliances, coin machines, paper currency recognizers, automatic actuators, coffee machines, towel machines, printing machines and Stage lighting. This section is suitable for small motor configuration high speed ratio, the installation space is limited occasions, large torque output.
- See more on Amazon...
Brand: Bringsmart | Manufacturer: Hugwit Company
Weight: 0.17 pounds
See On Amazon #17
uxcell 3mm to 8mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Dark Blue,4pcs
Asin: B08H24YHCW
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 3mm to 8mm; Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell 5mm Inner Dia H12*D10 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2 PCS for DIY Parts
Asin: B07PLB2P4W | Model: a18121800ux0625 | PartNumber: a18121800ux0625
Material: Iron Plating, Hardened By Heat Treatment, And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
Package: 2 X 5Mm Flange Shaft Coupling, 4 X Fastening Screw( M3 Hex Wrench Not Included Here ).
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly..
Type: Flange Shaft Coupling, Suitable For Model Shaft Connection, Perfect Accessories For Rc Model Motor, Etc..
Features
- Inner Diameter: 5mm/0.19 inch, Total Height: 12mm/0.47 inch, Cylinder Outer Diameter: 10mm/0.39 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 22mm/0.87 inch, Base Height: 2mm/0.08 inch, Mounting Hole Distance: 16mm/0.63 inch,2 x M3 Fastening Screws
- Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Material: Iron Plating, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.
- Package: 2 x 5mm Flange Shaft Coupling, 4 x Fastening Screw( M3 Hex Wrench Not Included Here )
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.97 x 1.18 inches
See On Amazon #19
uxcell 10mm Inner Dia H13*D16 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector Silver Tone 2 PCS for DIY Parts
Asin: B07PLBRMDQ | Model: B07PLBRMDQ | PartNumber: B07PLBRMDQ
Material: Iron Plating, Hardened By Heat Treatment, And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
Package: 2 X 10Mm Flange Shaft Coupling, 4 X Fastening Screw( M4 Hex Wrench Not Included Here ).
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly..
Type: Flange Shaft Coupling, Suitable For Model Shaft Connection, Perfect Accessories For Rc Model Motor, Etc..
Features
- Inner Diameter: 10mm/0.39 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 16mm/0.63 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 24mm/0.94 inch,2 x M4 Fastening Screws
- Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Material: Iron Plating, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.
- Package: 2 x 10mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here )
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.97 x 1.18 Inches
See On Amazon #20
uxcell 1/4 inch to 1/4 inch Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector for 3D Printers, Motor Accessories,Blue
Asin: B07P82DDVW
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 1/4 inch to 1/4 inch, Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.18 x 0.79 Inches
See On Amazon #21
AYLIFU 8mm Flange Coupling Connector Motor Guide Shaft Coupler high Hardness Coupling Connector for DIY Remote Control Model Motor (2 Sets, 8mm)
Asin: B0CSK6XTZD
Function: A Special Coupler That Can Fix One Shaft To A Flat Surface And Easily Install Other Components On The Shaft. Double Connection Points Tighten The Coupler..
Type: 8Mm Aluminum Alloy Rigid Flange Coupling Suitable For Model Shaft Connection, Is The Perfect Accessory For Remote Control Model Motors, Etc..
High-Hardness Coupling Connectors Are Durable, Insulated, Make Your Shaft More Stable, And Come With Setting Screws And Wrenches For Easy Installation And Replacement..
Standard Specification: Inner Diameter: 8 Mm. Cylinder Diameter: 16 Mm. Cylinder Height: 10 Mm. Base Diameter: 32 Mm. Base Height: 2 Mm..
Features
- Material: This 8mm flanged coupling connector is made of No. 45 steel (a kind of iron), which is made by heat treatment and electroplating, and its hardness is better than that of ordinary copper and aluminum alloy materials. Oil and rust proof.
- Standard specification: Inner diameter: 8 mm. Cylinder diameter: 16 mm. Cylinder height: 10 mm. Base diameter: 32 mm. Base height: 2 mm.
- Function: A special coupler that can fix one shaft to a flat surface and easily install other components on the shaft. Double connection points tighten the coupler.
- High-hardness coupling connectors are durable, insulated, make your shaft more stable, and come with setting screws and wrenches for easy installation and replacement.
- Type: 8mm aluminum alloy rigid flange coupling suitable for model shaft connection, is the perfect accessory for remote control model motors, etc.
- See more on Amazon...
Brand: AYLIFU | Manufacturer: AYLIFU
See On Amazon #22
5 Pcs Shaft Coupling Set - Motor Coupler with 4mm Bore, 22mm Length, 14mm Diameter Joint Connector for Mechanical Transmission - 6 8mm Size
Asin: B0D2DJKYP9
High-Quality Shaft Couplings Made Of Materials For Long-Lasting Use In Mechanical Transmission Systems.
Set Of 5 Motor Couplers With 6-8Mm Shaft Size, 4Mm Bore, 22Mm Length, And 14Mm Diameter For Versatile Applications.
Ideal For Diy Projects, Robotics, 3D Printers, And Other Applications Requiring Reliable Shaft Coupling Solutions.
Engineered Couplings Ensure And Efficient Power Transmission In Various Machinery.
Features
- Easy to install joint connectors for connecting motors and shafts securely without slippage
- engineered couplings ensure and efficient power transmission in various machinery
- High-quality shaft couplings made of materials for long-lasting use in mechanical transmission systems
- Ideal for DIY projects, robotics, 3D printers, and other applications requiring reliable shaft coupling solutions
- Set of 5 motor couplers with 6-8mm shaft size, 4mm bore, 22mm length, and 14mm diameter for versatile applications
- See more on Amazon...
Brand: Cyllde | Manufacturer: Cyllde
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.22 pounds
See On Amazon #23
Shaft Coupler, 5pcs Motor Shaft Coupling Connector Adapter Joint for Electric Car Toy, Spider Couplings (3mm to 6mm)
Asin: B0CNQ9YQ85 | Model: Fafeicyhy6z2ecux8-02 | PartNumber: Fafeicyhy6z2ecux8-02
Extensive Application: The Shaft Coupler Is Widely Used For Connecting Model Cars, Model Ships, Robots, Etc..
Made Of Premium Metal Material, It Is Durable And Has Long Service Life..
? Made Of Metal Materials, Strong And Durable, Widely Used To Connect Model Cars, Model Boats, Robots, Etc..
? This Joint Or Coupling Connects Rigid Rods Whose Shafts Are Inclined To Each Other, And Is Usually Used For Shafts That Transmit Rotational Motion..
Features
- :Made of premium metal material, it is durable and has long service life.
- ? This joint or coupling connects rigid rods whose shafts are inclined to each other, and is usually used for shafts that transmit rotational motion.
- EXTENSIVE APPLICATION: The shaft coupler is widely used for connecting model cars, model ships, robots, etc.
- ? Made of metal materials, strong and durable, widely used to connect model cars, model boats, robots, etc.
- Made of premium metal material, it is durable and has long service life.
- See more on Amazon...
Brand: Fafeicy | Manufacturer: Fafeicy
See On Amazon #24
Gerrit 10pcs Carbon Steel Flange Coupling with M6 M8 M10 M12 Thread Zinc Plating Three Hole Lock Nut Furniture Fastener (Size : M8 Color)
Asin: B0D21NLM1G | Model: Gerrit | PartNumber: Gerrit | Ean: 9433076922562
Material: The Flange Nut Is Made Of Galvanized. The Galvanised Treatment Does Not Rust Easily..
Mounting Screws Are Not Included..
Application: First Make The Hole, Insert The Nut, Secure The Screw To Fix The Nut, Make Sure The Nut Is Flush With The Surface, And Secure The Screw With Mechanical Thread To Connect To The Nut..
Stable Flange Base: The Three-Hole Locking Nut Is Fixed With A Three-Hole Flange, Which Is Safer And Can Be Used Longer. The Galvanised T-Nuts Have A Smooth Surface, No Burrs And Good Usability..
Features
- Wide application: mainly suitable for DIY, wood fastening and connection, strong practicability, such as wood and metal, suitable for outdoor and indoor household appliances, office equipment, toys, appliances, furniture, etc.
- Stable flange base: the three-hole locking nut is fixed with a three-hole flange, which is safer and can be used longer. The galvanised T-nuts have a smooth surface, no burrs and good usability.
- Material: the flange nut is made of galvanized. The galvanised treatment does not rust easily.
- Application: First make the hole, insert the nut, secure the screw to fix the nut, make sure the nut is flush with the surface, and secure the screw with mechanical thread to connect to the nut.
- Mounting screws are not included.
- See more on Amazon...
Brand: Gerrit | Manufacturer: Gerrit
Weight: 0.22 pounds
See On Amazon #25
Gerrit 10pcs Carbon Steel Flange Coupling with M6 M8 M10 M12 Thread Three Hole Lock Nuts Furniture Connector Fastener (Color : M8 Color)
Asin: B0D21N5D1G | Model: Gerrit | PartNumber: Gerrit | Ean: 9433076922432
Adopts 3 Hole Flange Fixing,The Fixing Is More Durable And Tight..
Application: First Make The Hole, Insert The Nut, Secure The Screw To Fix The Nut, Make Sure The Nut Is Flush With The Surface, And Secure The Screw With Mechanical Thread To Connect To The Nut..
Delicate And Practical, High Structure Strength, Firm And Strong..
Galvanized Treatment,The Is And Not Easily Rust..
Features
- Mainly used for furniture fixing and connection.
- Galvanized treatment,the is and not easily rust.
- Adopts 3 hole flange fixing,the fixing is more durable and tight.
- Delicate and practical, high structure strength, firm and strong.
- Application: First make the hole, insert the nut, secure the screw to fix the nut, make sure the nut is flush with the surface, and secure the screw with mechanical thread to connect to the nut.
- See more on Amazon...
Brand: Gerrit | Manufacturer: Gerrit
Weight: 0.22 pounds
See On Amazon #26
1PCS 3mm - 14mm Rigid Flange Coupling Motor Guide Metal Shaft Coupler Support Fixed Bearing Seat #45 Steel (Color : Silver, Size : 5 mm)
Asin: B0D21VYMQK | Model: Gerrit | PartNumber: Gerrit | Ean: 9433076921640
High Torque Carrying Capacity, Large Transmission Torque, High Rigidity And Zero Clearance, High Sensitivity, Can Quickly Change The Working State..
Hole Compression Nuts: Four-Hole Lock Nuts Are Fastened With A Four-Hole Flange, Which Is More Secure And Can Be Used Longer. This Is Intended To Distribute The Pressure Of The Nut To The Fixed Parts, Reducing The Risk Of Damaging The Parts And Reducing The Risk Of Being Damaged By Tighten..
Function: A Special Coupling That Can Fix The Shaft On A Flat Surface And Easily Mount Other Parts On The Shaft, Can Maintain High Centering Of The Two Axes. Dual Attachment Points Secure The Hook Securely..
Accessory : A Flange Nut Is A Nut With A Wide Flange On 1 End, Which Acts As A 1-Piece Non-Rotating Washer, And Is Widely Used In Car Model Shaft Connections. Exquisite And Practical, High Structural Strength, Firm And Firm..
Features
- Metal Material: The product structure is compact and the body is small, Made of M tal, zinc-plated treatment is not easy to rust, after heat treatment and electroplating, toughness and insulation. High strength, high precision, strong and durable, smooth surface, no burr, good practicability, Small screw hole 180 design, easy to install and replace.
- Accessory : A flange nut is a nut with a wide flange on 1 end, which acts as a 1-piece non-rotating washer, and is widely used in car model shaft connections. Exquisite and practical, high structural strength, firm and firm.
- High torque carrying capacity, large transmission torque, high rigidity and zero clearance, high sensitivity, can quickly change the working state.
- Function: A special coupling that can fix the shaft on a flat surface and easily mount other parts on the shaft, Can maintain high centering of the two axes. Dual attachment points secure the hook securely.
- Hole Compression Nuts: Four-hole lock nuts are fastened with a four-hole flange, which is more secure and can be used longer. This is intended to distribute the pressure of the nut to the fixed parts, reducing the risk of damaging the parts and reducing the risk of being damaged by tighten.
- See more on Amazon...
Brand: Gerrit | Manufacturer: Gerrit
Weight: 0.22 pounds
See On Amazon #27
Gerrit 10pcs Carbon Steel Flange Coupling M6 M8 M10 M12 Thread Zinc Plating Three Hole Lock Nuts Furniture Connector Fastener (Size : M6 Silver)
Asin: B0D224TG79 | Model: Gerrit | PartNumber: Gerrit | Ean: 9433076922302
Adopts 3 Hole Flange Fixing,The Fixing Is More Durable And Tight..
Application: First Make The Hole, Insert The Nut, Secure The Screw To Fix The Nut, Make Sure The Nut Is Flush With The Surface, And Secure The Screw With Mechanical Thread To Connect To The Nut..
Delicate And Practical, High Structure Strength, Firm And Strong..
Galvanized Treatment,The Is And Not Easily Rust..
Features
- Mainly used for furniture fixing and connection.
- Galvanized treatment,the is and not easily rust.
- Adopts 3 hole flange fixing,the fixing is more durable and tight.
- Delicate and practical, high structure strength, firm and strong.
- Application: First make the hole, insert the nut, secure the screw to fix the nut, make sure the nut is flush with the surface, and secure the screw with mechanical thread to connect to the nut.
- See more on Amazon...
Brand: Gerrit | Manufacturer: Gerrit
Weight: 0.22 pounds
See On Amazon #28
Sydien 4Pcs 4mm Rigid Flange Shaft Coupling Motor Guide Shaft Coupler Connector
Asin: B07RBL7KYF | Ean: 0745679813567 | UPC: 745679813567
👍High Quality:Made Of Fine Plating Steel Which Is Hardened By Heat Treatment And Electroplated.Its Hardness Is More Better Than Ordinary Copper And Aluminum Alloy Material. Anti-Oil And Anti-Rust..
👍Excellent Performance:Compact Structure And Small Size.It Can Effectively Ensure The Alignment Of Two Shafts..
👍Widely Use:Suitable For Model Shaft Connection,Perfect Accessories For Rc Model Motor,Etc..
👍Low Inertia:Flange Shaft Couplings Is So Highly Sensitive That Can Quickly Switch The Working State..
👍Inner Diameter:4Mm/0.16''.Fastening Screw Hole:M3.Base Fixing Screw Hole:M3.Cylinder Outer Diameter:10Mm/0.39''.Cylinder Height:10Mm/0.39''.Base Diameter:22Mm/0.87''.Base Height:2Mm/0.08''..
Features
- Package Content:4Pcs Flange Shaft Couplings with 1Pc Mini Hex Wrench with Some Fastening Screws.
- Inner Diameter:4mm/0.16''.Fastening Screw Hole:M3.Base Fixing Screw Hole:M3.Cylinder Outer Diameter:10mm/0.39''.Cylinder Height:10mm/0.39''.Base Diameter:22mm/0.87''.Base Height:2mm/0.08''.
- HIGH QUALITY:Made of fine plating steel which is hardened by heat treatment and electroplated.Its hardness is more better than ordinary copper and aluminum alloy material. Anti-oil and anti-rust.
- LOW INERTIA:Flange shaft couplings is so highly sensitive that can quickly switch the working state.
- EXCELLENT PERFORMANCE:Compact structure and small size.It can effectively ensure the alignment of two shafts.
- WIDELY USE:Suitable for model shaft connection,perfect accessories for RC model motor,etc.
- See more on Amazon...
Brand: Sydien | Manufacturer: Sydien
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #29
uxcell 6mm to 6mm Bore Rigid Coupling Set Screw L22XD14 Stainless Steel,Shaft Coupler Connector for 3D Printers, Motor Accessories,2pcs
Asin: B07PB9TDCG
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 6mm to 6mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 1.97 x 1.18 Inches
See On Amazon #30
QCDENG 10pcs 6mm to 6mm Brass Shaft Coupling Joint Connector, Motor Shaft Extension Connector
Asin: B0B7VHBR48 | Model: LS-402 | PartNumber: LS-402
🛒Packing List: 10 X Motor Shaft Coupling Connector 2 X Allen Wrench 40 X Screws.
🛒Application: With Wrench And Screw, Widely Used In Various Motors.
🛒Product Usage: Connect Two Shafts Of Different Specifications To Achieve The Purpose Of Changing Shafts.
🛒Size: 6Mm To 6Mm.
Features
- Material: Made of high-quality brass, high temperature resistance, corrosion resistance and oil resistance, long service life
- Size: 6mm to 6mm
- Packing list: 10 x Motor Shaft Coupling Connector 2 x Allen Wrench 40 x Screws
- Product Usage: Connect two shafts of different specifications to achieve the purpose of changing shafts
- Application: With wrench and screw, widely used in various motors
- See more on Amazon...
Brand: QCDENG | Manufacturer: QCQIANG
Dimensions: 0.59 x 2.27 x 1.85 Inches
See On Amazon
Looking For Something Else?
Search