Best spur gears - Buying Guide
Last Updated: 04/25/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
Upgrade Harden Steel 50T Main Spur Gear 1 Mod M1 for Traxxas X-MAXX XRT E-REVO 2.0 New MAXX XO-1-1 pc
Asin: B076CMVC42 | Model: B076CMVC42 | PartNumber: B076CMVC42 | Ean: 7849717313118
50 Tooth Hardened Steel Mod 1 (1.0 Metric Pitch) Spur Gear For The Traxxas E Revo2, X-Maxx 6S And 8S, Maxx 4S And Xo-1.
With The Pins Removed, Use The Four 4X16mm Button-Head Cap Screws On The Bottom To Set Gear Mesh. Loosen The Four 4X16mm Button-Head Cap Screws. Cut A Narrow Strip Of Notebook Paper And Run It Into The Gear Mesh. Slide The Motor And Pinion Gear Into The Spur Gear. Tighten The Four 4X16mm Button-Head Cap Screws, And Then Remove The Strip Of Paper. You Should Be Able To Run A Fresh Strip Of Paper Through The Gears Without Binding Them..
Do Not Use The Pin System For Setting The X-Maxx Gear Mesh. Instead, Manually Set The Gear Mesh Without The Pins. Refer To The Traxxas Manual For Instructions (Ref. Pg.22 - Adjusting Gear Mesh).
Color : Black.
Features
- Material: Harden Steel
- Color : Black
- 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1
- Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh)
- With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.
- See more on Amazon...
Brand: Raidenracing | Manufacturer: Raidenracing
Weight: 0.09 pounds
See On Amazon #2
Misakomo 15-Tooth Spur Gear Replacement for Hydraulic/Electric 2" x 2", 2.5" x 2.5", 2" x 3" & 3" x 3" Through Frame Slide-Outs Gear
Asin: B0BJTF5CSR
【Premium Quality】Long Life-Span Matters, That Is Why 15 Tooth Gear Is Composed Of High-Quality Metal, Which Can Ensure Hardness, Prevent Corrosion And Rust, And Greatly Improves Service Life..
【12-Month Warranty】 If For Any Reason At All, You Are Not Fully Satisfied With Camper Slide-Out Gear, Simply Contact Us Through Amazon Message At Any Time. We Will Provide Comprehensive Quality Assurance For Our Product..
【Fits】Replacement For 15 Tooth Spur Gear Used In Hydraulic/ Electric 2 X 2, 2.5 X 2.5, 2 X 3 & 3 X 3 Through Frame Slide-Outs. If You're Not Sure What Gear You Need Just Count The Teeth And Measure The Square Tube That Is Inside The Larger Tube Of The Slide Mechanism. (Notice: Units Manufactured Prior To October 2013 Will Use An 18-Tooth Gear.).
【Perfect Adaptation】As An Exact-Match Part, This Slide Gear Installs Just Like Your Original Equipment With No Assembly Required, After Direct Replacement, It Will Perfectly Fit Into The Track, Which Will Make Your Rig Run Smoothly As It Did At The Beginning..
Features
- NEEDS As time goes by, you will find that the main slide is always stuck when it is retracted, or even cannot be retracted at all, because the slide-out gear is rusted, which will make the main slide bend or even break. Simply replacing 15 tooth slide-out gear can solve the trouble and bring you a pleasant camping trip.
- Perfect Adaptation As an exact-match part, this slide gear installs just like your original equipment with no assembly required, After direct replacement, it will perfectly fit into the track, which will make your rig run smoothly as it did at the beginning.
- PREMIUM QUALITY Long life-span matters, that is why 15 tooth gear is composed of high-quality metal, which can ensure hardness, prevent corrosion and rust, and greatly improves service life.
- FITS Replacement for 15 tooth spur gear used in hydraulic/ electric 2 x 2, 2.5 x 2.5, 2 x 3 & 3 x 3 through frame slide-outs. If you're not sure what gear you need just count the teeth and measure the square tube that is inside the larger tube of the slide mechanism. (Notice: Units manufactured prior to october 2013 will use an 18-tooth gear.)
- 12-MONTH WARRANTY If for any reason at all, you are not fully satisfied with camper slide-out gear, simply contact us through amazon message at any time. We will provide comprehensive quality assurance for our product.
- See more on Amazon...
Brand: Misakomo | Manufacturer: Misakomo
Dimensions: 1.14 x 3.14 x 3.14 inches
See On Amazon #3
Lippert 238893 16 Tooth Spur Gear | 16 DP/20 PA
Asin: B07ZTVRXB4 | Model: 238893 | PartNumber: 238893 | Ean: 0848150061096 | UPC: 848150061096
Compatability Assurance — Tailored For Various In-Wall Rv Slide-Outs, This Replacement 16-Tooth Spur Gear Is Engineered To Fit Multiple Models. Please Consult Your Owner's Manual Before Purchasing To Ensure A Perfect Match For Your Specific System.
Effortless Installation — Engineered As An Exact-Match Component, The Installation Process For Our In-Wall 16-Tooth Rv Slide-Out Spur Gear Is Hassle-Free. With No Assembly Required, This Part Facilitates A Straightforward Installation Process.
Eliminates Guesswork — At Lippert, We Provide Direct Replacement Components, Eliminating Any Uncertainty In Finding The Right Part. This Ensures Your Rv And Its Equipment Can Swiftly Resume Normal Operation With Ease.
Genuine Replacement Part — This Is A Genuine Lippert Replacement Component Designed Specifically For In-Wall Slide-Outs. It Includes The Gear Only. The Complete Slide-Out Assembly Is Not Included.
Features
- RESTORES SLIDE-OUT FUNCTIONALITY Designed to swiftly restore your RV's slide-out functionality, our In-Wall replacement 16-tooth RV slide-out spur gear ensures a quick return to optimal operation, minimizing downtime and allowing you to get back on the road in no time
- GENUINE REPLACEMENT PART This is a genuine Lippert replacement component designed specifically for In-Wall slide-outs. It includes the gear only. The complete slide-out assembly is not included
- COMPATABILITY ASSURANCE Tailored for various In-Wall RV slide-outs, this replacement 16-tooth spur gear is engineered to fit multiple models. Please consult your owner's manual before purchasing to ensure a perfect match for your specific system
- ELIMINATES GUESSWORK At Lippert, we provide direct replacement components, eliminating any uncertainty in finding the right part. This ensures your RV and its equipment can swiftly resume normal operation with ease
- EFFORTLESS INSTALLATION Engineered as an exact-match component, the installation process for our In-Wall 16-tooth RV slide-out spur gear is hassle-free. With no assembly required, this part facilitates a straightforward installation process
- See more on Amazon...
Brand: Lippert Components | Manufacturer: Lippert™
Dimensions: 1.00 x 2.20 x 1.70 inches | Weight: 0.08 pounds
Warranty: 1 Year
See On Amazon #4
pinion gear Spur Gear Pinion 20 Teeth 1.5 Module 8mm 10mm 12mm 15mm Bore Straight Teeth 1.5M 20T Steel Gear Gear Rack Transmission Gear bore shaft ( Color : 8mm bore 3mm keyway , Size : 20 Teeth )
Asin: B0CFPZ896C | Ean: 9378910190120
Features High Wear-Resistance, Strong And Durable, Which Takes The Quenching & Blackening Process For Long Lifetime..
Widely Applied In Agricultural Equipment, Textile Machinery, Printing Machinery, Mechanical Transmission, Automotive And Other Industries That Needs Steering Drive..
Features
- Spur Gear Pinion 20 Teeth 1.5 Module 8mm 10mm 12mm 15mm Bore Straight Teeth 1.5M 20T Steel Gear Gear Rack Transmission Gear
- Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive.
- features high wear-resistance, strong and durable, which takes the quenching & blackening process for long lifetime.
- See more on Amazon...
Brand: KUSTAT | Manufacturer: KUSTAT
Weight: 0.22 pounds
See On Amazon #5
Industrial Machinery Pinion Gear 1.5 Module Spur Gear Motor Gear 1.5M 24T-30T 45# Steel Mechanical Transmission Gear Keyway Bore (Size : 14mm(5x2.3mm), Color : 1.5M 24T)
Asin: B0CMPPTJXF | Model: KJOET | PartNumber: KJOET | Ean: 8152320564730
3. Widely Used In Conveying, Agricultural Equipment, Textile Machinery, Printing Machinery And Other Fields..
2. Easy To Install And Use, Smooth Transmission Process, For A Variety Of Mechanical Transmission Occasions..
Features
- 1. High wear resistance, durable, compact structure, small size, light weight, long service life.
- 2. Easy to install and use, smooth transmission process, for a variety of mechanical transmission occasions.
- 3. Widely used in conveying, agricultural equipment, textile machinery, printing machinery and other fields.
- See more on Amazon...
Brand: KJOET | Manufacturer: KJOET
Weight: 0.11 pounds
Warranty: No warranty.
See On Amazon #6
HARFINGTON Gear Rack 1Mod 10mmx10mmx1000mm 45# Steel Straight Linear Spur Rack for Machines Automotive
Asin: B0C5SZBKFG
Feature - Racks Are Used To Convert Rotary Motion Into Linear Motion. The Straight Teeth Of The Rack Are Cut Into One Face Of The Square Or Circular Section Of The Rod And Fit With The Pinion, Which Has The Characteristics Of Mechanical Simplicity, High Load-Carrying Capacity, And Unlimited Length..
Note - Only Gears Of The Same Type Can Be Used With Racks. For Example, A 1M Rack Can Be Used With All 1M Gears..
Application - Spur Racks Are Paired With Spur Gears And Are Suitable For Lifting Mechanisms (Vertical Movement), Horizontal Movement, Positioning Mechanisms, Stopping And Allowing Simultaneous Rotation Of Multiple Axes In Industrial Machinery..
Material - The Spur Rack Is Made Of 45# Steel, Which Has High Hardness, Strength, And Strong Deformation Resistance, It Is More Durable, Longer Lasting, And Easier To Process, Install, And Debug..
Features
- Size - Model: 1 Mod; Length: 1000mm/39.37"; Width: 10mm/0.39"; Height: 10mm/0.39"; Tooth Pitch: 3.14mm/0.12"; Tooth Depth: 2.25mm/0.09"
- Material - The spur rack is made of 45# steel, which has high hardness, strength, and strong deformation resistance, it is more durable, longer lasting, and easier to process, install, and debug.
- Feature - Racks are used to convert rotary motion into linear motion. The straight teeth of the rack are cut into one face of the square or circular section of the rod and fit with the pinion, which has the characteristics of mechanical simplicity, high load-carrying capacity, and unlimited length.
- Application - Spur racks are paired with spur gears and are suitable for lifting mechanisms (vertical movement), horizontal movement, positioning mechanisms, stopping and allowing simultaneous rotation of multiple axes in industrial machinery.
- Note - Only gears of the same type can be used with racks. For example, a 1M rack can be used with all 1M gears.
- See more on Amazon...
Brand: HARFINGTON | Manufacturer: HARFINGTON
See On Amazon #7
80Pcs Plastic DIY Robot Gear Kit Gearbox Motor Gear Set for DIY Car Robot
Asin: B06W9FSTCP | Model: CL-001 | PartNumber: CL-001
Suitable For Diy Model Production Technology..
This Is The Most Complete Gear Set, Includes 80 Kinds Of Gear Parts. It Can Meet Your Diy Needs.
The Great Tools For All Kinds Of Diy Cars, Robots, Model Making Accessories..
Features
- The product is for toys gear spare parts package.
- The great tools for all kinds of DIY cars, robots, model making accessories.
- Suitable for DIY model production technology.
- This is the most complete gear set, includes 80 kinds of gear parts. It can meet your DIY needs
- See more on Amazon...
Brand: Sruim | Manufacturer: SRUIM
Weight: 0.02 Pounds
See On Amazon #8
KUSTAT Pinion Gear 0.5 Module 72 Teeth Step Spur Gear Pinion 5mm 6mm 8mm Bore Metal Gear 45 Steel Motor Gear bore Shaft (Size : 8mm bore)
Asin: B0CD9X9RRH | Ean: 9378909219399
Weight: 36G.
Features High Wear-Resistance, Strong And Durable, Which Takes The Quenching & Blackening Process For Long Lifetime..
Widely Applied In Agricultural Equipment, Textile Machinery, Printing Machinery, Mechanical Transmission, Automotive And Other Industries That Needs Steering Drive..
Size: 37X10x5mm/1.46X0.39X0.2 Inch (Od X H X Id).
Features
- Modulus: 0.5M ,Teeth: 72T, Hole Dia: 5mm, 6mm, 8mm
- Size: 37x10x5mm/1.46x0.39x0.2 Inch (OD x H x ID)
- Weight: 36g
- Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive.
- features high wear-resistance, strong and durable, which takes the quenching & blackening process for long lifetime.
- See more on Amazon...
Brand: KUSTAT | Manufacturer: KUSTAT
Weight: 0.22 Pounds
See On Amazon #9
ELLANA Transmission Angle Spur Gear 1M 21T 22T 23T 25T 30T 33T 35T Gear Pinion 1 Module 20T 35 Teeth Plastic Gear 7mm 8mm 9mm 10mm Bore DIY Toy Gear Driver Shaft (Color : 8mm bore, Size : 33 Teeth)
Asin: B0CJQR6PP5 | Ean: 9378912338803
Teeth: 20T 21T 22T 23T 24T 25T 26T 27T 28T 29T30t 31T 32T 33T 34T 35T.
The Contact Between The Gears Is Firm, Which Ensures The Normal Operation Of The Machine And Good Bearing Capacity..
Not Easy To Wear, Durable And Lasting Performance. This Gear Is An Excellent Industrial Replacement Accessory..
Bore Diameter: 7Mm; 8Mm; 9Mm; 10Mm.
Features
- Module: 1 module
- Bore diameter: 7mm; 8mm; 9mm; 10mm
- Teeth: 20T 21T 22T 23T 24T 25T 26T 27T 28T 29T30T 31T 32T 33T 34T 35T
- Not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory.
- The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity.
- See more on Amazon...
Brand: ELLANA | Manufacturer: ELLANA
Weight: 0.22 pounds
See On Amazon #10
KUSTAT Pinion Gear 1.5 Module Plastic Gear 15T 16T 18T 20T 22T 24T 25T 28T 30 Teeth Spur Gear 6mm 8mm 10mm 12mm Bore Spur Gear Blue Gear bore Shaft (Color : 12mm bore, Size : 1PCS 15 Teeth)
Asin: B0CDF2QDJD | Ean: 9378909317675
No Transmission Delay, Not Easy To Jump/Slip Teeth, Fixed Center Distance, Long Life..
Features High Wear-Resistance, Strong And Durable, Which Takes The Quenching & Blackening Process For Long Lifetime..
Widely Applied In Agricultural Equipment, Textile Machinery, Printing Machinery, Mechanical Transmission, Automotive And Other Industries That Needs Steering Drive..
Size: Tooth Pitch 4.71Mm, Tooth Thickness 15Mm, Total Thickness 25Mm.
Features
- Smooth operation and precise transmission
- Size: tooth pitch 4.71MM, tooth thickness 15mm, total thickness 25mm
- no transmission delay, not easy to jump/slip teeth, fixed center distance, long life.
- Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive.
- features high wear-resistance, strong and durable, which takes the quenching & blackening process for long lifetime.
- See more on Amazon...
Brand: KUSTAT | Manufacturer: KUSTAT
Weight: 0.22 pounds
See On Amazon #11
DIY Pinion Motor Gear Combo Set, 1pcs Spur Gear Pinion 1.5M 20T Metal Gear 16mm Bore 5mm Keyway 45 Steel Pinion Metal Gear 1.5 Module 20 Teeth Gear Rack spur Bevel
Asin: B0D258KNQC | Model: HEAGER | PartNumber: HEAGER | Ean: 7439749583384
High Wear-Resistance, Strong And Durable, Long Life Time..
If You Have Any Questions, Please Feel Free To Contact Us. We Will Give You A Satisfactory Reply And Look Forward To Your Purchase. Have A Nice Life, Thank You..
Material: 45 Steel, Surface Treatment: High Frequency Quench Treatment Of Tooth And Blackening Process.
Model Specifications: 1.5 Mod, Teeth: 18 Teeth.
Features
- Bore: 16mm, Keyway: 5mm
- Model specifications: 1.5 mod, Teeth: 18 teeth
- High wear-resistance, strong and durable, long life time.
- Material: 45 steel, Surface treatment: High frequency quench treatment of tooth and blackening process
- If you have any questions, please feel free to contact us. We will give you a satisfactory reply and look forward to your purchase. Have a nice life, thank you.
- See more on Amazon...
Brand: HEAGER | Manufacturer: HEAGER
Weight: 0.44 pounds
See On Amazon #12
HLYTFV Steel Motor Drive Gear 1pcs Steel Spur Gear 1Mod 21/22/23/24/25/26/27/28T Metal Gear Thickness 10mm Outer Dia 13-18mm (Size : Process Hole 6mm, Color : 1M 22 Teeth)
Asin: B0D251FB77 | Model: HLYTFV | PartNumber: HLYTFV | Ean: 8095462280031
3. Widely Used In Agricultural Equipment, Textile Machinery, Printing Machinery, Mechanical Transmission And Other Industries That Need To Be Driven By Steering..
2. Small Size, Light Weight, Easy To Carry, Easy To Install, With Good Performance..
Features
- 1. Good machining makes it less rough and noisy than other gears, making it roll smoothly.
- 2. Small size, light weight, easy to carry, easy to install, with good performance.
- 3. Widely used in agricultural equipment, textile machinery, printing machinery, mechanical transmission and other industries that need to be driven by steering.
- See more on Amazon...
Brand: HLYTFV | Manufacturer: HLYTFV
Weight: 4.41 pounds
See On Amazon #13
DIY Pinion Motor Gear Combo Set, 1pcs 0.5 Module 20T 30T 40T 50T 60T Brass Worm Gear 0.5M 20 Teeth Spur Gear Pinion for Drive Gear Box Shaft spur Bevel (Size : 20 Teeth) (Size : 50 Teeth)
Asin: B0D1Y8QZHL | Model: HEAGER | PartNumber: HEAGER | Ean: 7439749561894
High Wear-Resistance, Strong And Durable, Long Life Time..
If You Have Any Questions, Please Feel Free To Contact Us. We Will Give You A Satisfactory Reply And Look Forward To Your Purchase. Have A Nice Life, Thank You..
Teeth: 20 30 40 50 60.
Material: Brass.
Features
- Module: 0.5
- Material: Brass
- High wear-resistance, strong and durable, long life time.
- Teeth: 20 30 40 50 60
- If you have any questions, please feel free to contact us. We will give you a satisfactory reply and look forward to your purchase. Have a nice life, thank you.
- See more on Amazon...
Brand: HEAGER | Manufacturer: HEAGER
Weight: 0.44 pounds
See On Amazon #14
HLYTFV Steel Motor Drive Gear 1pcs Spur Gear Rack Pinion 2M 20Teeth 2Mod Bore 8/10/12/14/15/16/17/18mm Staight Teeth Positive Gear Steel CNC Transmission (Size : 14mm Keyway 5mm, Color : 2M 20 Teeth)
Asin: B0D1TMCB49 | Model: HLYTFV | PartNumber: HLYTFV | Ean: 8095460972006
3. Widely Used In Agricultural Equipment, Textile Machinery, Printing Machinery, Mechanical Transmission And Other Industries That Need To Be Driven By Steering..
2. Small Size, Light Weight, Easy To Carry, Easy To Install, With Good Performance..
Features
- 1. Good machining makes it less rough and noisy than other gears, making it roll smoothly.
- 2. Small size, light weight, easy to carry, easy to install, with good performance.
- 3. Widely used in agricultural equipment, textile machinery, printing machinery, mechanical transmission and other industries that need to be driven by steering.
- See more on Amazon...
Brand: HLYTFV | Manufacturer: HLYTFV
Weight: 4.41 Pounds
See On Amazon #15
Steel Motor Drive Gear Metal Gear Wheel 1Module 40T Pinion Gears Wheel 6/6.35/7/8//12/12.7/14/15mm Bore 1 Mould 40Teeth Spur Gear Pinion (Size : 6mm, Color : 40 Teeth)
Asin: B0D1TWHLY4 | Model: HLYTFV | PartNumber: HLYTFV | Ean: 8095460959953
3. Widely Used In Agricultural Equipment, Textile Machinery, Printing Machinery, Mechanical Transmission And Other Industries That Need To Be Driven By Steering..
2. Small Size, Light Weight, Easy To Carry, Easy To Install, With Good Performance..
Features
- 1. Good machining makes it less rough and noisy than other gears, making it roll smoothly.
- 2. Small size, light weight, easy to carry, easy to install, with good performance.
- 3. Widely used in agricultural equipment, textile machinery, printing machinery, mechanical transmission and other industries that need to be driven by steering.
- See more on Amazon...
Brand: HLYTFV | Manufacturer: HLYTFV
Weight: 4.41 pounds
See On Amazon #16
HLYTFV Steel Motor Drive Gear 1pcs 1M50T Spur Gear Bore Size 6/8/10/12mm Motor Gear Low Carbon Steel Metal Gear for Motor (Size : 6mm, Color : 50 Teeth)
Asin: B0D1TK7RWH | Model: HLYTFV | PartNumber: HLYTFV | Ean: 8095460947202
3. Widely Used In Agricultural Equipment, Textile Machinery, Printing Machinery, Mechanical Transmission And Other Industries That Need To Be Driven By Steering..
2. Small Size, Light Weight, Easy To Carry, Easy To Install, With Good Performance..
Features
- 1. Good machining makes it less rough and noisy than other gears, making it roll smoothly.
- 2. Small size, light weight, easy to carry, easy to install, with good performance.
- 3. Widely used in agricultural equipment, textile machinery, printing machinery, mechanical transmission and other industries that need to be driven by steering.
- See more on Amazon...
Brand: HLYTFV | Manufacturer: HLYTFV
Weight: 4.41 pounds
See On Amazon #17
RLLHGH Carbon Steel Bevel Gear 41x10x6MM Silver 80 Teeth Motor Metal Steel Gear Wheel 0.5 Modulus Top Screws 6mm Hole Diameter
Asin: B0D1TFCWG7 | Model: RLLHGH | PartNumber: RLLHGH | Ean: 8095460369820
3. Compact Size, Good Efficiency, Good Reliability, Good Transmission Rate, Stable Structure, Easy Installation, Uniform Force, Stable Connection..
2. Not Easy To Wear Long Time, Good Hardness, High Precision, Low Noise, Accurate Transmission..
Features
- 1. Long service life, good toughness, impact resistance, suitable for high-speed heavy overload transmission.
- 2. Not easy to wear long time, good hardness, high precision, low noise, accurate transmission.
- 3. Compact size, good efficiency, good reliability, good transmission rate, stable structure, easy installation, uniform force, stable connection.
- See more on Amazon...
Brand: RLLHGH | Manufacturer: RLLHGH
Weight: 4.41 pounds
See On Amazon #18
RLLHGH Carbon Steel Bevel Gear 10pcs 0.5M 9T Small Copper Gear 1.5/2mm Diameter Gear (Size : 1.5mm)
Asin: B0D1Q7F13C | Model: RLLHGH | PartNumber: RLLHGH | Ean: 8095460088479
3. Compact Size, Good Efficiency, Good Reliability, Good Transmission Rate, Stable Structure, Easy Installation, Uniform Force, Stable Connection..
2. Not Easy To Wear Long Time, Good Hardness, High Precision, Low Noise, Accurate Transmission..
Features
- 1. Long service life, good toughness, impact resistance, suitable for high-speed heavy overload transmission.
- 2. Not easy to wear long time, good hardness, high precision, low noise, accurate transmission.
- 3. Compact size, good efficiency, good reliability, good transmission rate, stable structure, easy installation, uniform force, stable connection.
- See more on Amazon...
Brand: RLLHGH | Manufacturer: RLLHGH
Weight: 4.41 pounds
See On Amazon #19
RLLHGH Carbon Steel Bevel Gear Spur Gear 1.5 Module-20T Blackening Carbon Steel High Frequency Quenching Gear Bore Size 5/6/6.35/8/10/12/14/15mm (Size : 5 mm, Color : 1.5M-20T)
Asin: B0D1BB6FWT | Model: RLLHGH | PartNumber: RLLHGH | Ean: 8095460091196
3. Compact Size, Good Efficiency, Good Reliability, Good Transmission Rate, Stable Structure, Easy Installation, Uniform Force, Stable Connection..
2. Not Easy To Wear Long Time, Good Hardness, High Precision, Low Noise, Accurate Transmission..
Features
- 1. Long service life, good toughness, impact resistance, suitable for high-speed heavy overload transmission.
- 2. Not easy to wear long time, good hardness, high precision, low noise, accurate transmission.
- 3. Compact size, good efficiency, good reliability, good transmission rate, stable structure, easy installation, uniform force, stable connection.
- See more on Amazon...
Brand: RLLHGH | Manufacturer: RLLHGH
Weight: 4.41 pounds
See On Amazon #20
RLLHGH Carbon Steel Bevel Gear 1pcs 12T-27T 2M Blue Nylon Spur Gear 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Teeth Plastic Flat Cylindrical Drive Gears (Size : 26 Teeth (OD 56mm))
Asin: B0D1Q7NPW1 | Model: RLLHGH | PartNumber: RLLHGH | Ean: 8095460094364
3. Compact Size, Good Efficiency, Good Reliability, Good Transmission Rate, Stable Structure, Easy Installation, Uniform Force, Stable Connection..
2. Not Easy To Wear Long Time, Good Hardness, High Precision, Low Noise, Accurate Transmission..
Features
- 1. Long service life, good toughness, impact resistance, suitable for high-speed heavy overload transmission.
- 2. Not easy to wear long time, good hardness, high precision, low noise, accurate transmission.
- 3. Compact size, good efficiency, good reliability, good transmission rate, stable structure, easy installation, uniform force, stable connection.
- See more on Amazon...
Brand: RLLHGH | Manufacturer: RLLHGH
Weight: 4.41 pounds
See On Amazon #21
Boston Gear YA15 Spur Gear, Steel, Inch, 20 Pitch, 0.375" Bore, 0.850" OD, 0.500" Face Width, 15 Teeth
Asin: B004NYAJ0A | Model: YA15 | PartNumber: YA15 | Ean: 0781711098967 | UPC: 781711098967
Diametral Pitch Of 20 For Applications Requiring A Balance Between Transferring Torque And Controlling Changes In Speed And Direction Of Rotation With Precision.
Low Carbon Steel (.2 Percent Carbon) For Applications Where The Hardness And Strength Of Higher Levels Of Carbon Are Not Needed To Transmit Torque And Motion.
Pressure Angle Of 20 Degrees For A Lower Contact Ratio Between Gears, Resulting In Higher Load Capacity Than Smaller Pressure Angles.
Features
- Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
- Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
- Diametral pitch of 20 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
- Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
- See more on Amazon...
Brand: Boston Gear | Manufacturer: Boston Gear
See On Amazon #22
Martin TS2084 Spur Gear, 20 Pressure Angle, High Carbon Steel, Inch, 20 Pitch, 5/8" Bore, 4.3" OD, 0.500" Face Width, 84 Teeth
Asin: B004BDO8DC | Ean: 0697950294186 | UPC: 697950294186
Diametral Pitch Of 20 For Applications Requiring A Balance Between Transferring Torque And Controlling Changes In Speed And Direction Of Rotation With Precision.
High Carbon Steel For Tensile Strength And Hardness.
Pressure Angle Of 20 Degrees For A Lower Contact Ratio Between Gears, Resulting In Higher Load Capacity Than Smaller Pressure Angles.
Features
- Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
- Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
- Diametral pitch of 20 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
- High carbon steel for tensile strength and hardness
- See more on Amazon...
Brand: Martin | Manufacturer: Martin
See On Amazon #23
Boston Gear NB22B-5/8 Spur Gear, 14.5 Pressure Angle, Steel, Inch, 16 Pitch, 0.625" Bore, 1.500" OD, 0.500" Face Width, 22 Teeth
Asin: B004N6341Y | Model: NB22B5/8 | PartNumber: NB22B5/8 | Ean: 0781711460399 | UPC: 781711460399
Diametral Pitch Of 16 For Applications Requiring A Balance Between Transferring Torque And Controlling Changes In Speed And Direction Of Rotation With Precision.
Low Carbon Steel (.2 Percent Carbon) For Applications Where The Hardness And Strength Of Higher Levels Of Carbon Are Not Needed To Transmit Torque And Motion.
Pressure Angle Of 14.5 Degrees For A Higher Contact Ratio Between Gears, Resulting In Quieter Operation Than Larger Pressure Angles.
Features
- Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
- Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
- Diametral pitch of 16 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
- Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
- See more on Amazon...
Brand: Boston Gear | Manufacturer: Boston Gear
See On Amazon #24
Boston Gear YF201 Spur Gear, Steel, Inch, 10 Pitch, 1.000" Bore, 2.200" OD, 1.250" Face Width, 20 Teeth
Asin: B004NYAIU6 | Model: YF201 | PartNumber: YF201 | Ean: 0781711461808 | UPC: 781711461808
Diametral Pitch Of 10 For Applications Requiring A Balance Between Transferring Torque And Controlling Changes In Speed And Direction Of Rotation With Precision.
Low Carbon Steel (.2 Percent Carbon) For Applications Where The Hardness And Strength Of Higher Levels Of Carbon Are Not Needed To Transmit Torque And Motion.
Pressure Angle Of 20 Degrees For A Lower Contact Ratio Between Gears, Resulting In Higher Load Capacity Than Smaller Pressure Angles.
Features
- Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
- Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
- Diametral pitch of 10 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
- Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
- See more on Amazon...
Brand: Boston Gear | Manufacturer: Boston Gear
See On Amazon #25
Boston Gear H32160 Spur Gear, 14.5 Pressure Angle, Steel, Inch, 32 Pitch, 0.375" Bore, 5.062" OD, 0.188" Face Width, 160 Teeth
Asin: B004N631SA | Model: H32160 | PartNumber: H32160 | Ean: 0781711095683 | UPC: 781711095683
Diametral Pitch Of 32 For Applications Where Controlling Changes In Speed And Direction Of Rotation With Precision Is More Important Than Transferring Torque.
Low Carbon Steel (.2 Percent Carbon) For Applications Where The Hardness And Strength Of Higher Levels Of Carbon Are Not Needed To Transmit Torque And Motion.
Pressure Angle Of 14.5 Degrees For A Higher Contact Ratio Between Gears, Resulting In Quieter Operation Than Larger Pressure Angles.
Features
- Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
- Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
- Diametral pitch of 32 for applications where controlling changes in speed and direction of rotation with precision is more important than transferring torque
- Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
- See more on Amazon...
Brand: Boston Gear | Manufacturer: Boston Gear
See On Amazon #26
1 Mod 35T Steel Pinion Gear 1M35T Motor Spur Gear Bore 15mm Outer Diameter 37mm (Bore 15mm)
Asin: B08GCLMG4N | Ean: 8935490252290
Step Diameter: 25Mm; Bore: 6/6.35/7/8/10/12/12.7/14/15/16/17Mm.
Material: Black Oxide #45 Steel.
Fix Set Screws: M5 X 2Pcs.
Teeth Outer Diameter: 37Mm; Total Height: 18Mm; Teeth Height: 10Mm.
Features
- Product name: 1Mod 35T spur gear
- Teeth outer diameter: 37mm; Total height: 18mm; Teeth height: 10mm
- Step diameter: 25mm; Bore: 6/6.35/7/8/10/12/12.7/14/15/16/17mm
- Fix set screws: M5 x 2pcs
- Material: black oxide #45 steel
- See more on Amazon...
Brand: MF-Tools | Manufacturer: MF-Tools
See On Amazon #27
Boston Gear YA40 Spur Gear, Steel, Inch, 20 Pitch, 0.500" Bore, 2.100" OD, 0.500" Face Width, 40 Teeth
Asin: B004NYAHLQ | Ean: 0781711099100 | UPC: 781711099100
Diametral Pitch Of 20 For Applications Requiring A Balance Between Transferring Torque And Controlling Changes In Speed And Direction Of Rotation With Precision.
Low Carbon Steel (.2 Percent Carbon) For Applications Where The Hardness And Strength Of Higher Levels Of Carbon Are Not Needed To Transmit Torque And Motion.
Pressure Angle Of 20 Degrees For A Lower Contact Ratio Between Gears, Resulting In Higher Load Capacity Than Smaller Pressure Angles.
Features
- Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
- Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
- Diametral pitch of 20 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
- Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
- See more on Amazon...
Brand: Boston Gear | Manufacturer: Boston Gear
See On Amazon #28
uxcell 10 Pcs White Plastic 10 Teeth Electrical Models Toothed Wheels Gears
Asin: B00LGKY0OK | Model: a13123100ux0426 | PartNumber: a13123100ux0426 | Ean: 0696734392124 | UPC: 696734392124
Material : Plastic;Color : White.
Package Content : 10 X Plastic Gear.
Net Weight : 3G.
Shaft Dia : 2.0Mm/0.08";Total Size : 5 X 5.7Mm /0.2"X 0.22"(T*D).
Features
- Product Name : Plastic Gear;Teeth Number : 10
- Shaft Dia : 2.0mm/0.08;Total Size : 5 x 5.7mm /0.2x 0.22(T*D)
- Material : Plastic;Color : White
- Net Weight : 3g
- Package Content : 10 x Plastic Gear
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 1.18 x 0.39 inches
See On Amazon #29
Boston Gear YPB4896 Spur Gear, Molded Delrin with Brass Inserts, Inch, 48 Pitch, 0.250" Bore, 2.042" OD, 0.125" Face Width, 96 Teeth
Asin: B004NYAJY6 | Model: YPB4896 | PartNumber: YPB4896 | Ean: 0781711539781 | UPC: 781711539781
Diametral Pitch Of 48 For Applications Where Controlling Changes In Speed And Direction Of Rotation With Precision Is More Important Than Transferring Torque.
Molded Polyoxymethylene For Quiet Operation, Low Friction And Moisture Absorption, And High Resistance To Heat And Abrasion Combined With The Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability Of Brass.
Pressure Angle Of 20 Degrees For A Lower Contact Ratio Between Gears, Resulting In Higher Load Capacity Than Smaller Pressure Angles.
Features
- Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
- Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
- Diametral pitch of 48 for applications where controlling changes in speed and direction of rotation with precision is more important than transferring torque
- Molded polyoxymethylene for quiet operation, low friction and moisture absorption, and high resistance to heat and abrasion combined with the corrosion resistance, ductility at high temperatures, and low magnetic permeability of brass
- See more on Amazon...
Brand: Boston Gear | Manufacturer: Boston Gear
See On Amazon
Looking For Something Else?
Search