Best 3d printer controllers - Buying Guide
Last Updated: 04/25/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
BIGTREETECH SKR Mini E3 V3.0 Control Board with TMC2209 UART Stepper Driver New Upgrade 32Bit 3D Printer Silent Board for Ender-3, Ender3 Pro, Ender-3 V2 3D Printer
Asin: B09LC34SCK | Model: KINGPRINTER-ZZB000590 | PartNumber: KINGPRINTER-ZZB000590 | Ean: 0778416923601 | UPC: 778416923601
【Heating Output】Support Heating Hot End And Hot Bed Output. The Heating Indicator Light Will Light Up When The Heating Hot End Or Hot Bed Is Correctly Connected And Powered On. Please Connect The Wires In A Power-Off State, Otherwise It May Cause Static Breakdown Of The Mosfet And Damage To The Control Board..
【Output Power Supply】Increase Spi Output Port +3.3V Power Supply, External Spi Sensor Power Supply Voltage +3.3V And +5V Are Optional, Support The Motherboard To Directly Supply Power To Peripherals..
【Heat Sink Upgrade】Redesign The Drive Heat Sink, Strengthen The Drive Heat Dissipation Capacity, And Greatly Improve The Heat Dissipation Performance; There Are 4 Tmc2209 Silent Drivers Onboard The Motherboard..
【Three Cnc Fan】Increase The Heat Dissipation Controllable Fan To Reduce The Printer Temperature When The Device Is Working; The Fan Port Needs To Ensure That The Fan Voltage Specifications Are Consistent With The Motherboard Power Supply, Otherwise The Fan Will Have No Voltage..
Features
- Main Control Chip Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6 or STM32G0B0RET6; Add thermistor interface protection circuit to prevent damage to the main control chip.
- Three CNC Fan Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working; The fan port needs to ensure that the fan voltage specifications are consistent with the motherboard power supply, otherwise the fan will have no voltage.
- Heating Output Support heating hot end and hot bed output. The heating indicator light will light up when the heating hot end or hot bed is correctly connected and powered on. Please connect the wires in a power-off state, otherwise it may cause static breakdown of the MOSFET and damage to the control board.
- Heat Sink Upgrade Redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly improve the heat dissipation performance; There are 4 tmc2209 silent drivers onboard the motherboard.
- Output Power Supply Increase SPI output port +3.3V power supply, external SPI sensor power supply voltage +3.3V and +5V are optional, support the motherboard to directly supply power to peripherals.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #2
BIGTREETECH SKR Mini E3 V3.0 Motherboard, Ender-3/Ender-3 Pro/Ender-3 V2 Motherboard Upgrade, BTT 32 Bit Silent Control Board with TMC2209 UART Stepper Motor Driver
Asin: B07YW86YS7 | Model: SKR MINI E3 V3.0 | PartNumber: SKR MINI E3 V3.0
🔥【Diy Friendly】Btt Skr Mini E3 V3.0 Motherboard Supports Bltouch, Rgb Lights, Blocking Detection And Shutdown Function. It Also Supports Tft35 E3 V3.0.1/Tft35 V3.0.1/Tft28 V3.0 Touch Screen As Well As Original 12864 Lcd Screen..
🔥【Firmware Update】Skr Mini E3 V3.0 Is Compatible Both With Marlin And Klipper Firmwares. Firstly Download Firmware On Github Website Of Skr Mini E3 V3.0 Motherboard, Copy And Save It To Sd Card (Note: Ensure Firmware Have Been Reserved ), Then Re-Plug The Sd Card And Wait For 10S. Note: Our Control Board Comes Without Sd Card..
🔥【Warranty】Biqu Offers A 12-Months Warranty For Our Skr Mini E3 V3 Motherboard. Please Feel Free To Contact Us If You Might Have Any Problem About Our Product, We Are Always Ready For Help..
🔥【Onboard Tmc2209 Drivers】Bigtretech Skr Mini E3 V3.0 Mainboard Is Integrated With Ultra Silent Tmc2209 Stepper Motor Driver. Tmc2209 Driver Generates Lower Heat And Has A Larger-Area Cooling Position To Lower The Working Temperature. Meanwhile, Tmc2209 Adopts Stealthchop2 Mute Technology To Ensures Noiseless Operation, Maximum Efficiency And Best Motor Torque..
🔥【Larger Heatsink And 3 Cnc Fans】Upgraded Skr Mini E3 V3.0 Has A Larger Aluminum Heat Sink Area For Stepper Motor Driver, Increasing Its Heat Dissipation Performance By 20%. And Skr Mini E3 V3 Also Has 3 Heat Dissipation Controllable Fans To Reduce The Heat Of Your 3D Printers When It's Working..
Features
- Born for Ender-3 Main control chip of BTT SKR Mini E3 V3.0 mainboard is STMicroelectronics' latest G0 series: STM32G0B1RET6 or STM32G0B0RET6. This 3D printer control board is compatible with Ender-3, Ender-3 V2, Ender-3 Pro, Ender-5 and Ender-5 pro.
- Larger Heatsink and 3 CNC Fans Upgraded SKR MINI E3 V3.0 has a larger aluminum heat sink area for stepper motor driver, increasing its heat dissipation performance by 20%. And SKR MINI E3 V3 also has 3 heat dissipation controllable fans to reduce the heat of your 3D printers when it's working.
- DIY Friendly BTT SKR Mini E3 V3.0 motherboard supports BLTouch, RGB lights, blocking detection and shutdown function. It also supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28 V3.0 touch screen as well as original 12864 LCD screen.
- Onboard TMC2209 Drivers BIGTRETECH SKR MINI E3 V3.0 mainboard is integrated with ultra silent TMC2209 stepper motor driver. TMC2209 driver generates lower heat and has a larger-area cooling position to lower the working temperature. Meanwhile, TMC2209 adopts stealthChop2 Mute technology to ensures noiseless operation, maximum efficiency and best motor torque.
- Firmware Update SKR Mini E3 V3.0 is compatible both with Marlin and Klipper firmwares. Firstly download firmware on GitHub website of SKR MINI E3 V3.0 motherboard, copy and save it to SD card (Note: ensure firmware have been reserved ), then re-plug the SD card and wait for 10s. Note: Our control board comes without SD card.
- Warranty BIQU offers a 12-months warranty for our SKR MINI E3 V3 motherboard. Please feel free to contact us if you might have any problem about our product, we are always ready for help.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #3
BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black
Asin: B09LH727MT | Model: ZZB000590 | PartNumber: ZZB000590 | Ean: 0778416923601 | UPC: 778416923601
⭐【Heat Sink Design Upgrade】Bigtreetech Skr Mini E3 V3.0 Motherboard New Upgraded To Integrated Large Stepping Motor Driver Aluminum Heat Sink,Strengthen The Drive Heat Dissipation Capacity, And Greatly Improve The Motherboardc Heat Dissipation Performance..
⭐【Fan Upgraded】Bigtreetech Skr Mini E3 V3.0 Motherboard Increase Three Cnc Heat Dissipation Controllable Fan Interface To Reduce The Printer Temperature When The Device Is Working..
⭐【100% Satisfying Customer Services 】Due To Amazon's Return Policy, There May Be Some Problems With The Packaging Of The Products You Receive, We Are Sorry For This Situation, Please Don't Worry, Feel Free To Contact Us, We Will Solve This Problem For You Properly!.
⭐【Multiple Functions】Btt Skr Mini E3 V3.0 Silent Board Supports Bltouch,Microprobe, Rgb Lights,Filament Detection, Automatic Shutdown,Power-Off Reesume, Display Supports Tft35 E3 V3.0.1/Tft35 V3.0.1/Tft28/Tft43/Tft50/Tft70 V3.0 Touch Screen As Well As Original 12864 Lcd Of Ender 3 Printer.When Running Klipper Touch Mode，Please Choose Btt Hdmi5 V1.1 Touchscreen.
⭐【Multiple Compatibile】Bigtreetech Skr Mini E3 V3.0 Control Board Integrated Ultra Silent Tmc2209 Uart Stepper Driver,Designed For Ender 3,Plug And Playing,Compatible With Ender 5/Ender 5 Pro/Ender 3 V2 3D Printer, The Firmware Is Pre-Install Well Before We Ship Out, You Can Select The Firmware Base On Your Needs..
Features
- Main Control Chip BIGTREETECH SKR Mini E3 V3.0 32 bit control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin.
- Multiple Compatibile BIGTREETECH SKR MINI E3 V3.0 control board integrated ultra silent TMC2209 uart stepper driver,designed for Ender 3,Plug and Playing,Compatible with Ender 5/Ender 5 Pro/Ender 3 V2 3D Printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs.
- Heat Sink Design Upgrade BIGTREETECH SKR MINI E3 V3.0 motherboard new upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance.
- Multiple Functions BTT SKR MINI E3 V3.0 silent board Supports BLTouch,MicroProbe, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer.when running Klipper touch mode Please choose BTT HDMI5 V1.1 touchscreen
- Fan Upgraded BIGTREETECH SKR Mini E3 V3.0 motherboard Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working.
- 100% Satisfying Customer Services Due to Amazon's return policy, there may be some problems with the packaging of the products you receive, we are sorry for this situation, please don't worry, feel free to contact us, we will solve this problem for you properly!
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.39 x 4.08 x 2.76 inches
See On Amazon #4
BIGTREETECH SKR PICO V1.0 Control Board Mini Controller Board with TMC2209 UART Stepper Motor and Raspberry Pi Online Printing for Voron V0 V0.1 3D Printer Motherboard
Asin: B09MYKL9MP | Model: 1060000513 | PartNumber: 1060000513
💝【Mute Printing & Premium Capacitors】Featured With Tmc2209 Mute Driver Uart Mode, Big Tree Tech Skr Pico V1.0 Supports Mute 3D Printing. The Main Version Of The Chip Capacitor (Mlcc) Adopts High-Quality Murata Capacitors To Enhance Product's Quality..
💝【Satisfying After-Sales Supports】Any Issues Or Questions About Btt Skr Pico V1.0, Please Feel Free To Contact Us Any Time On Amazon. Our Professional Technical Team're Willing To Provide You With Immediate Technical Supports As Soon As We Can..
💝【Upgraded Heat Dissipation】Upgrade The Design Of The Heat Sink And Increase The Heat Dissipation Area. Increased Controllable Fan Enables To Lower The Temperature Of The Whole Machine When The It's Working, Effectively Solving Problems Related To Heat Dissipation, And Improving On The Heat Dissipation..
💝【Perfectly Match With Raspberry Pi】Btt Skr Pico V1.0 Control Board With Raspberry Pi Board Frame, Raspberry Pi Can Be Perfectly Installed On Btt Skr Pico Mainboard, Saving Internal Spaces. The Unique Lateral Design Of Skr Pico‘S Seat Perfectly Matches The Space Characteristics Of The Voron V0 And V0.1 Machine That Needs To Be Fixed To The Motherboard Longitudinally.Compatible With Btt Pi Can Running Klipper..
Features
- Brand-new Version for Voron V0& V0.1 Featured with Raspberry Pi ARM Cortex- Mo+ MCU PR2040, Bigtreetech SKR Pico V1.0 motherboard upgraded on ID design, which coexists of stylish appearance and excellent performances, ideal choice for Voron players.The fuse kit consists of fuse and holder,which enables easy disassembling and installation. Type-C interface allows for main control communication.
- Perfectly match With Raspberry Pi btt skr pico v1.0 control board With Raspberry Pi board frame, Raspberry Pi can be perfectly installed on BTT SKR Pico mainboard, saving internal spaces. The unique lateral design of SKR Pico s seat perfectly matches the space characteristics of the Voron V0 and V0.1 machine that needs to be fixed to the motherboard longitudinally.compatible with BTT PI can running Klipper.
- Mute Printing & Premium Capacitors Featured with TMC2209 mute driver UART mode, big tree tech SKR PICO V1.0 supports mute 3D printing. The main version of the chip capacitor (MLCC) adopts high-quality Murata capacitors to enhance product's quality.
- Upgraded Heat Dissipation Upgrade the design of the heat sink and increase the heat dissipation area. Increased controllable fan enables to lower the temperature of the whole machine when the it's working, effectively solving problems related to heat dissipation, and improving on the heat dissipation.
- Satisfying After-Sales Supports Any issues or questions about BTT SKR Pico V1.0, please feel free to contact us any time on Amazon. Our professional technical team're willing to provide you with immediate technical supports as soon as we can.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.11 x 33.46 x 22.04 inches | Weight: 0.28 Pounds
See On Amazon #5
BIGTREETEHCH TFT35 E3 V3.0.1 Touch Screen Display with Two Working Modes Compatible 12864 LCD Display WiFi for Ender 3 CR-10 SKR MINI E3 V3.0/SKR V1.4 Turbo Octopus V1.1 SKR 3 3D Printer Control Board
Asin: B081DTNVPF | Model: tft35 e3 v3.0.1 | PartNumber: tft35 e3 v3.0.1 | Ean: 0787794452504 | UPC: 787794452504
💝【Multi Function Expansion Interface 】Bigtreetech Tft35 E3 V3.0.1 Is A 3D Printer Upgrade That Offers Both Sd Card And Usb Functionality, Reserve The Extension Port Of Filament Breaking Detection,Automatic Shutdown After Printing，Wifi Function Can Be Realized By External Wifi Module Through Wifi Port..
💝【100% Satisfying After-Sales Services】If You Have Any Questions Regarding Bigtreetech Tft35-E3 V3.0.1 Touch Screeen, Please Contact Us On Amazon. Our Technical Supports Team Will Get Back To You Within 24 Hours. 1-Year Warranty Is 100% Guaranteed..
💝【Wide Compatiblity】Not Only Is This Btt Tft35 E3 V3.0.1 Smart Display Compatible With Ender Series Printers,But Can Also Be Used On A Host Of Other 3D Printers Too, As Long As You Are Willing To Print Your Own Enclosure For Other Display Panel Styles,Compatible With Skr Mini E3 V3.0/Octopus/Skr V1.4 Turbo/Skr 3/Skr 3 Ez/Skr Pro V1.2..Etc Motherboard.
💝【Dual Modes】Btt Tft35-E3 V3.0 Display Touch Screen Two Working Modes, Support Uart Serial Port Screen Mode And 12864 Screen Mode Support Two Printing Modes：Sd Card And U Disk With One Catering The Marlin-Style Interface, And The Other Offering A Full Colour Touch Interface With The Option To Switch Between Them Within Seconds While The Machine Is Running..
Features
- Main Control Chip BIGTREETECH TFT35 E3 V3.0.1 touch screen adopts ARM Cortex-M3 series GD32F205VCT6 master controller with 32-bit main frequency of 120MHz, it is designed for ENDER 3 3d printer especially, which can perfectly replace the original LCD screen of Ender 3 Printer.
- Dual Modes btt tft35-e3 v3.0 display touch screen two working modes, support UART serial port screen mode and 12864 screen mode support two printing Modes SD Card and U disk with one catering the Marlin-style interface, and the other offering a full colour touch interface with the option to switch between them within seconds while the machine is running.
- Multi function expansion interface BIGTREETECH TFT35 E3 V3.0.1 is a 3D Printer Upgrade that offers both SD Card and USB functionality, reserve the extension port of filament breaking detection,automatic shutdown after printing WIFI function can be realized by external WIFI module through WIFI port.
- Wide Compatiblity Not only is this BTT TFT35 E3 V3.0.1 smart display compatible with Ender series printers,but can also be used on a host of other 3D Printers too, as long as you are willing to print your own enclosure for other display panel styles,compatible with SKR MINI E3 V3.0/Octopus/SKR V1.4 Turbo/SKR 3/SKR 3 EZ/SKR Pro V1.2..etc motherboard
- 100% Satisfying After-sales Services If you have any questions regarding Bigtreetech TFT35-E3 V3.0.1 touch screeen, please contact us on Amazon. Our technical supports team will get back to you within 24 hours. 1-Year warranty is 100% guaranteed.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Direct
Dimensions: 0.31 x 3.66 x 3.42 inches
See On Amazon #6
BIGTREETECH TMC5160T Pro Stepper Motor Driver Silent Driver Up to 56V Support High-Speed Printing SPI&SD Mode with Heatsink for Manta M8P/M5P/M4P, Octopus Pro, Octopus, SKR 3 EZ Control Board (4 PCS)
Asin: B09JS5YDQN | Model: KINGPRINTER-ZZB000574 | PartNumber: KINGPRINTER-ZZB000574
⭐Prevents Motor From Shaking: Spreadcycle High-Precision Chopping Algorithm For Highly Dynamic Motor Motion And Producing An Absolutely Clean Current Wave. Low Noise, Low Resonance And Low Vibration Chopper..
⭐Stall Detection: By Safely Detecting The Stop Action Of The Motor And Replacing A Mechanical Stop Switch, The Torque Control Of The Stepper Motor Or The Sensorless Return To The Origin Can Be Realized. Can Drive 57 Stepper Motors..
⭐Not Easy To Lose Step: Allows The Motor To Operate Near Its Load And Speed Limits, Enabling 10X Or More Dynamic Range Without Any Out-Of-Step..
⭐Ultra-Silent Mode: Supports Trinamics' Unique Stealthchop2 Mode, Which Eliminates Motor Noise By Reducing Resonance And Achieves A Mute Effect..
Features
- TMC5160T Pro stepper motor driver adopts high-power control chip and externally expands power MOS tube, which can support larger current, and the maximum current can reach 8A (because the module is limited by the heating area, the current cannot exceed 5A), and low heat generation when working .
- Ultra-silent Mode: Supports Trinamics' unique stealthChop2 mode, which eliminates motor noise by reducing resonance and achieves a mute effect.
- Prevents Motor From Shaking: SpreadCycle high-precision chopping algorithm for highly dynamic motor motion and producing an absolutely clean current wave. Low noise, low resonance and low vibration chopper.
- Not Easy to Lose Step: Allows the motor to operate near its load and speed limits, enabling 10x or more dynamic range without any out-of-step.
- Stall detection: By safely detecting the stop action of the motor and replacing a mechanical stop switch, the torque control of the stepper motor or the sensorless return to the origin can be realized. Can drive 57 stepper motors.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #7
BIGTREETECH Octopus Pro V1.1 H723 32 bit Control Board 550MHz Support 8 Axis Stepper Motor Drivers TMC2209 Klipper/Marlin High-Speed/Voltage Printing Support Raspberry Pi Octprint Operating Systems
Asin: B0BM3BFZ35 | Model: US-1020000408 | PartNumber: US-1020000408
【🐙Stepper Motor Upgraded】Support 8 Axis Powerful Motor Driver ，Support 5V Level For Stepper Motor Driver ,Better Performance. Support Max 60V Motor Input Voltage To Inprove Motor Power ,Reduce Pulse Losing. Support Step/Dir/Uart/Spi Mode. Such As Tmc2209.Tmc2208,Tmc5160t Pro Stepper Drivers..
【 ❤️Attation】, If You Have Any Problems During Use, Please Contact Us At The First Time. We Will Give You A Satisfactory Solution..
【🐙Expanded Function Interface】Bltouch ,Resume Printing, Wifi ,Rgb Light, Sfs V2.0 Filament Runout Detection.Power Shundown,Proximity Sensor...Etc. Dsiaplay Compatible With Hdmi5 V1.1 Touchscreen/Tft35/50/70 Display(Notes：Running Klipper,Tft Series Display Only Support 12864 Mode).
【🐙Increase Motherboard Protector Level Conversion Chip 】Convert 3.3V Signal To 5V Signal ,Improve Driver Performance，8 Isolation Chips To Protector The Motherboard ，Avoid Reverse Drive Insertion Or Short Circuit. The Main Control Chip Is Burnt.
【🐙 Onboard Max31865 】Support 2/4-Wire Pt100/Pt1000 Temperature Measurement Without Welding (The Soldering Resistance Can Also Support 3-Wire Pt100/Pt1000 Temperature Measurement.
【🐙About Firmware】Supports Marlin And Klipper, The Best Choice For Klipper High-Speed / Voltage Printing，Meet The Individual Need Of Diy Users，Support Operation Systems Raspberry Pi / Octoprint.Compatible Btt Pi V1.2 Or Cb1+Pi4b Adapter..
Features
- Main Control Chip BIGTREETECH Octopus pro v1.1 h723 board adopts the ARM Cortex-M7 series, STM32H723ZET6, main frequency up to 550MHz, 512KB flash,Processing is more stable and fast.
- About Firmware Supports Marlin and Klipper, the best choice for Klipper high-speed / voltage printing meet the individual need of DIY users support Operation systems Raspberry Pi / Octoprint.Compatible btt pi v1.2 or CB1+Pi4b adapter.
- Stepper motor Upgraded Support 8 axis powerful motor driver support 5V level for stepper motor driver ,better performance. support max 60V motor input voltage to inprove motor power ,reduce pulse losing. Support STEP/DIR/UART/SPI Mode. such as TMC2209.TMC2208,TMC5160T Pro stepper drivers.
- Onboard MAX31865 Support 2/4-wire PT100/PT1000 temperature measurement without welding (the soldering resistance can also support 3-wire PT100/PT1000 temperature measurement
- Expanded function interface Bltouch ,Resume printing, wifi ,RGB Light, SFS V2.0 Filament runout detection.Power shundown,Proximity sensor...etc. dsiaplay compatible with HDMI5 v1.1 touchscreen/TFT35/50/70 display(notes running klipper,tft series display only support 12864 mode)
- Increase motherboard protector Level conversion chip Convert 3.3V signal to 5V signal ,Improve driver performance 8 isolation chips to protector the motherboard Avoid reverse drive insertion or short circuit. the main control chip is burnt
- Attation , If you have any problems during use, please contact us at the first time. We will give you a satisfactory solution.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.04 x 5.91 x 3.94 Inches
See On Amazon #8
BIGTREETECH Manta M8P V2.0 Integrated Control Board 32Bit Running Klipper with CB1, High Speed 3D Printer Motherboard, Compatible TMC5160T Plus,TMC5160,TMC2209,TMC2240 Stepper Driver (Without CB1)
Asin: B0CHFJYM5N | Model: KINGPRINTER-1020000442 | PartNumber: KINGPRINTER-1020000442
⭐The Control Board And The Core Board Use Btb Connection Method, So That Other Core Board Solutions Other Than Cm4 Can Be Selected, Such As Bigtreetech Cb1. The Mainboard Reserves The Spi Expansion Interface For Using The Klipper Firmware To Connect An External Acceleration Sensor For Acceleration Compensation..
⭐The Mcu Firmware Can Be Upgraded Through Sd Card, Or Through Dfu Through Klipper's Make Flash Command; The Main Board Reserves The Proximity Switch Interface, Supports Npn And Pnp Type Selection, (24V, 12V, 5V) Voltage Optional, Shared With Vfan6 Voltage Selection..
⭐The Thermistor Can Select The Pull-Up Resistance Value Through The Jumper, Which Supports Pt1000 Without External Modules, Which Is Convenient For Diy Use; The Control Board Reserves A Three-Way Four-Wire Fan Interface, Which Can Be Used To Connect A Water Cooling Device..
⭐The Power Chip Of Manta M8p Integrated Main Control Board Adopts Tps5450-5A, Which Supports Dc12/24V Power Input; The Output Current Of This Chip Is Up To 5A, And The Peak Value Can Reach 6A, Which Perfectly Supports The Power Supply Of Raspberry Pi..
Features
- BIGTREETECH Manta M8P V2.0 Control Board uses 32-bit ARM Cortex-M7 series STM32H723ZET6 main control chip with a core frequency of 550MHz. High efficiency MOSFET for less heat generation;
- The power chip of Manta M8P integrated main control board adopts TPS5450-5A, which supports DC12/24V power input; the output current of this chip is up to 5A, and the peak value can reach 6A, which perfectly supports the power supply of Raspberry Pi.
- The control board and the core board use BTB connection method, so that other core board solutions other than CM4 can be selected, such as BIGTREETECH CB1. The mainboard reserves the SPI expansion interface for using the Klipper firmware to connect an external acceleration sensor for acceleration compensation.
- The thermistor can select the pull-up resistance value through the jumper, which supports PT1000 without external modules, which is convenient for DIY use; the control board reserves a three-way four-wire fan interface, which can be used to connect a water cooling device.
- The MCU firmware can be upgraded through SD card, or through DFU through Klipper's make flash command; the main board reserves the proximity switch interface, supports NPN and PNP type selection, (24V, 12V, 5V) voltage optional, shared with VFAN6 Voltage selection.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #9
BIGTREETECH DIRECT SKR Mini E3 V2.0 Control Board 32Bit Silent Motherboard Integrated with TMC2209 UART Stepper Motor Driver for Upgraded Ender 3 Ender 3 Pro 3D Printer Control Board
Asin: B089CQ3DHB | Model: ZZB000412 | PartNumber: ZZB000412
🌈【Support Various Functions】Btt Skr Mini E3 V2.0 Control Board Supports Various Function Extensions, Such As, Bltouch, Filament Detection, Resumption Of Shutdown, Shutdown After Shutdown, Etc ..
🌈【Satisfying Customer Services】If You Need Any Information For Skr Mini E3 V2.0, You Could Contact Us On Amazon, And We'll Get Back To You Within 24 Hours..
🌈【Notes】 Pay Attention To Correct Wiring, Avoid Motherboard Contact With Metal Objects, And Take Electrostatic Protection Measures..
🌈【 4 Layers For Board】Bigtreetech Direct Skr Mini E3 V2.0 Increased To 4 Layers On The Control Board's Back, So As To Improve On Heat Dissipation Signal Function And Anti-Interference..
🌈【Better Thermal Dissipation】The Hot-Bed Mos Tube Uses Wsk220n04, Low On-Resistance, Which Reduces Heat Generation. Enlarged Heat Dissipation Area Protects Driving Chip And Components From Problems Caused By Heat Sink..
Features
- Silent Control Board BIGTREETECH DIRECT SKR MINI E3 V2.0 adopts ARM Cortex-M3 series STM32F103RCT6 main control chip with 32-bit CPU 72MHz, integrated with TMC2209 to enhance its stability. It's a super easy drop in replacement for Ender 3 printer.plug and playing.
- Better Thermal Dissipation The hot-bed MOS tube uses WSK220N04, low on-resistance, which reduces heat generation. Enlarged heat dissipation area protects driving chip and components from problems caused by heat sink.
- Support Various Functions BTT SKR MINI E3 V2.0 control board supports various function extensions, such as, BLtouch, filament detection, resumption of shutdown, shutdown after shutdown, etc .
- 4 Layers for Board BIGTREETECH DIRECT SKR MINI E3 V2.0 increased to 4 layers on the control board's back, so as to improve on heat dissipation signal function and anti-interference.
- Satisfying Customer Services If you need any information for SKR MINI E3 V2.0, you could contact us on Amazon, and we'll get back to you within 24 hours.
- Notes Pay attention to correct wiring, avoid motherboard contact with metal objects, and take electrostatic protection measures.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH Origianl
Dimensions: 0.39 x 4.00 x 2.80 inches
See On Amazon #10
BIGTREETECH Kraken Control Board Onboard 8 TMC2160 Drivers Up to 60V High-Performance Perfect Fit Voron Phoenix CoreXY 3D Printer DIY Support Klipper/Marlin/RRF For HDMI5/HDMI7, EBB SB2209 CAN, BTT Pi
Asin: B0CQX9XJ4W | Model: KINGPRINTER-1020000456 | PartNumber: KINGPRINTER-1020000456
Reserve 2 Canbus Ports (Jst Socket, Which Can Directly Connect To Btt Ebb Sb2209/Sb2240 Can Wiring); Reserve Two Four Wire Fan Interfaces, With Optional 24V/12V/5V Voltage, And Can Be Used To Connect To Water Cooling Devices;.
If You Plan To Diy Assemble A Voron24 Core Xy 3D Printer With Large-Sized Dual Idex High-Performance Properties, You Can Choose: Btt Kraken* 1Pc, Ebb Sb2209 Or Ebb36 Or Ebb42 Can* 2Pcs, Btt Pi* 1Pc, Hdmi5 Or Hdmi7* 1Pc; This Set Combination Will Satisfy You..
Reserve Proximity Switch Interface, Supporting Npn And Pnp Type Selection (24V/12V/5V) Voltage Options; Reserve Spi Extension Interface For Users Using Klipper Firmware To Connect External Acceleration Sensors For Acceleration Compensation..
Onboard 8 Tmc2160 Drivers In Spi Mode With Diag Function Pins; Simply Plug And Unplug Jumpers For Easy Use; Onboard Two Max31865 Modules, Supporting Dual Pt Thermocouples And Compatible With Two Or Four-Wire Pt100/Pt1000, Facilitating Diy Usage For Customers..
Features
- BIGTREETECH Kraken Control Board Utilizes 32-bit ARM Cortex-M7 series STM32H723ZGT6 MCU with a main frequency of 550MHz; High-performance MOSFETs to reduce heat generation.
- Onboard 8 TMC2160 drivers in SPI mode with DIAG function pins; simply plug and unplug jumpers for easy use; Onboard two MAX31865 modules, supporting dual PT thermocouples and compatible with two or four-wire PT100/PT1000, facilitating DIY usage for customers.
- Reserve 2 CANbus ports (JST socket, which can directly connect to BTT EBB SB2209/SB2240 CAN wiring); Reserve two four wire fan interfaces, with optional 24V/12V/5V voltage, and can be used to connect to water cooling devices;
- Reserve proximity switch interface, supporting NPN and PNP type selection (24V/12V/5V) voltage options; Reserve SPI extension interface for users using Klipper firmware to connect external acceleration sensors for acceleration compensation.
- If you plan to DIY assemble a Voron24 Core XY 3D printer with large-sized dual IDEX high-performance properties, you can choose: BTT Kraken* 1PC, EBB SB2209 or EBB36 or EBB42 CAN* 2PCS, BTT Pi* 1PC, HDMI5 or HDMI7* 1PC; This set combination will satisfy you.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #11
BIGTREETECH Octopus V1.1 Control Board 32bit Compatible TFT Series Screen, Support DIY Klipper Firmware and Raspberry-Pi Online Printing for Voron V2.4 Upgrade 3D Printer (with 8Pcs TMC2209)
Asin: B09713SRVP | Model: KINGPRINTER-UUU001949 | PartNumber: KINGPRINTER-UUU001949
🐙【Motherboard Expansion Function】Support Bltouch, Locked-Rotor Detection, Shutdown After Printing, Resume Printing After Power Failure, Can Bus, U Disk Function, Iic Expansion; At The Same Time Reserved Wifi Interface, Pt100 Thermistor Interface (Optional), Dual Z-Axis Printer..
🐙【Tmc2209 Driver Mode】Tmc Motor Drivers Can Be Used In Spi Or Uart Mode By Simply Adjusting The Onboard Jumpers Beneath Each Motor Driver. Additionally You Can Connect Or Disconnect The Tmc Diag Pin Using An Onboard Jumper Allowing You To Use Hard Endstops Or Sensorless Homing Without The Need To Cut Any Pins..
🐙【Tmc2209 Driver Features】The Tmc2209 Stepper Driver Is Not Easy To Lose Steps And Is In An Ultra-Quiet Mode; The Module Has A Large Area Of Heat Dissipation Pad, Which Can Reduce The Temperature Of The Driver When It Is Working; The Module Supports Three Modes: Step / Dir And Uart..
🐙【Strong Diy Support】This Motherboard Supports Up To 8 Stepper Drivers With 9 Stepper Driver Outputs In Total; And Up To 6 Pwm Fans And 2 Always-On Fans With The Ability To Individually Select The Voltage Rail That Will Drive Each Fan. Select From Vin, 12V Or 5V..
Features
- Main Control Chip Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.
- Strong DIY Support This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V.
- Motherboard Expansion Function Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion; at the same time reserved WIFI interface, PT100 thermistor interface (optional), dual Z-axis printer.
- TMC2209 Driver Features The TMC2209 stepper driver is not easy to lose steps and is in an ultra-quiet mode; the module has a large area of heat dissipation pad, which can reduce the temperature of the driver when it is working; the module supports three modes: STEP / DIR and UART.
- TMC2209 Driver Mode TMC Motor drivers can be used in SPI or UART mode by simply adjusting the onboard jumpers beneath each motor driver. Additionally you can connect or disconnect the TMC DIAG pin using an onboard jumper allowing you to use hard endstops or sensorless homing without the need to cut any pins.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #12
BIGTREETECH Direct Octopus V1.1 Control Board 32Bit Silent Motherboard Support 8 Axis TMC2209 Stepper Motor Driver Compatible btt pi v1.2/PI 2 to Running Klipper/Marlin for Voron 2.4 CoreXY 3D Printer
Asin: B094Y77FQN | Model: ZZB000540 | PartNumber: ZZB000540 | Ean: 0779605800352 | UPC: 779605800352
🐙【6 Pwm Fans Plus 2 】The Octopus V1.1 Mainboard Offers Up To 6 Controllable Pwm Fans And Additional 2 Without Control With The Possibility Of Voltage Selection From 5V, 12V Or 24V.The Btt Octopus Also Has 8 Sockets For Drivers, Making It An Ideal Electronics For Demanding Machines..
🐙【Online/ Offline Printing】Supports “Print From Sd Card” And “Print Via Usb Otg” Using The Integrated Usb-A Port. Usb-C Interface Supports An Emulated Serial Port That Allows Printing Via Usb.If You Need Any Help Regarding Btt Octopus V1.1 Control Board, Please Feel Free To Contact Us Via Amazon Message. We Have Professional Tech Supports Online To Take Care Of Your Problems..
🐙【Multifunctional Interface】Octopus V1.1 Control Board Support Bltouch,Microprobe Auto Bed Leveling Senso,Sfs V2.0 Smart Filament Runout, Power Loss Detection, Automatic Power Down, Display Support Tft35 E3 V3.0.1 Tft35 V3.0/Tft50/70,When Running Klipper Touch Mode,Choose Hdmi5 V1.1Or Tft35 Spi Touchscreen..
🐙【Supports Klipper/Marlin】Bigtreetech Octopus V1.1 Control Board For Voron 2.4 Compatible With Btt Pi V1.2/Pi 2 Supports Running Klipper And Marlin,Supports Firmware Update By Usb (Recommended) And Dfu Mode(Advanced Users). Updating Via Dfu Mode Is To Send Firmware To The Board Directly From Pc With No Need For Bootloader, Which Is Not Recommended For Novice Users..
🐙【Can Bus】Btt Octopus V1.1 Motherboard Supports Can Bus Connectivity Using An Ethernet Connector. This Can Bus Connection Allows To Expand Control Board With Other Expansion Boards Very Easily..
Features
- Main Control Chip : BIGTREETECH Octopus V1.1 control board adoptes ARM Cortex-M4 series STM32F446ZET6 32-bit microcontroller at 180MHz with 512Kb flash ROM. Notice: Input voltage only supports 24V, 12V is not allowed.
- CAN BUS btt octopus v1.1 motherboard supports CAN Bus connectivity using an ethernet connector. This CAN Bus connection allows to expand control board with other expansion boards very easily.
- 6 PWM Fans Plus 2 The Octopus v1.1 Mainboard offers up to 6 controllable PWM fans and additional 2 without control with the possibility of voltage selection from 5V, 12V or 24V.The BTT Octopus also has 8 sockets for drivers, making it an ideal electronics for demanding machines.
- Supports Klipper/Marlin bigtreetech octopus v1.1 control board for voron 2.4 compatible with btt pi v1.2/Pi 2 supports running Klipper and Marlin,Supports firmware update by USB (recommended) and DFU mode(advanced users). Updating via DFU mode is to send firmware to the board directly from PC with no need for bootloader, which is not recommended for novice users.
- Online/ Offline printing Supports print from SD card and print via USB OTG using the integrated USB-A port. USB-C interface supports an emulated serial port that allows printing via USB.If you need any help regarding BTT Octopus V1.1 control board, please feel free to contact us via Amazon message. We have professional tech supports online to take care of your problems.
- Multifunctional interface Octopus V1.1 control board support BLTOUCH,Microprobe auto bed leveling senso,SFS V2.0 Smart Filament runout, power loss detection, automatic power down, display support TFT35 E3 V3.0.1 TFT35 V3.0/TFT50/70,When running Klipper touch mode,choose HDMI5 V1.1or TFT35 SPI Touchscreen.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH Direct
See On Amazon #13
BIGTREETECH SKR 3 EZ Control Board 32bit New Upgrade Silent Board Support EZ2209/ EZ5160/ EZ2130 Stepper Driver Compatible TFT Series Touch Screen, DIY for Most FDM 3D Printer (with 5PCS EZ2209)
Asin: B0B1WQ9B8L
✨Skr 3 Ez Mainboard Using 32-Bit Arm Cortex-M7 Series Stm32h743vi Main Control Chip With A Main Frequency Of 480Mhz, The Performance Has Greatly Improved. It Reserves The Boot Button, Users Can Update The Motherboard Boot Program Through Dfu..
✨Ez Drivers Can Achieve Quietness When The Motor Is Locked And Running At Low Speed. It Is Recommended To Select When The Maximum Motor Speed Is Lower Than 300Rpm; It Can Achieve Quietness And Low Power Consumption In A Wide Range Of Speed And Torque. It Is Recommended That The Maximum Motor Speed Exceeds 300Rpm Select At 300Rpm..
✨Skr 3 Ez’S Numerical Control Fan Realizes 24V, 12V, 5V Voltage Selection Through The External Power Supply Module, Eliminating The Need For The Operation Of The Customer's External Transformer Module, Thereby Reducing The Probability Of Damage To The Motherboard..
✨Skr 3 Ez 3D Control Board Adopts Two Kinds Of Driver Sockets, Which Are Compatible With Both Bigtreetech Ez Series Driver Modules And Tmc Series Driver Modules. Each Motor Drive Module Can Select The Corresponding Motor Voltage Through The Jumper Cap..
Features
- Why use EZ Drivers? Because 40% of users have damaged the driver due to the wrong installation. It will damage the control board or even more damage. Using EZ Drivers can improve the experience of more users.
- SKR 3 EZ 3D Control Board adopts two kinds of driver sockets, which are compatible with both BIGTREETECH EZ series driver modules and TMC series driver modules. Each motor drive module can select the corresponding motor voltage through the jumper cap.
- SKR 3 EZ mainboard using 32-bit ARM Cortex-M7 series STM32H743VI main control chip with a main frequency of 480MHz, the performance has greatly improved. It reserves the BOOT button, users can update the motherboard boot program through DFU.
- SKR 3 EZ s numerical control fan realizes 24V, 12V, 5V voltage selection through the external power supply module, eliminating the need for the operation of the customer's external transformer module, thereby reducing the probability of damage to the motherboard.
- EZ Drivers can achieve quietness when the motor is locked and running at low speed. It is recommended to select when the maximum motor speed is lower than 300RPM; it can achieve quietness and low power consumption in a wide range of speed and torque. It is recommended that the maximum motor speed exceeds 300RPM Select at 300RPM.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #14
BIGTREETECH CB1 V2.2 Core Control Board 100M 1GB DDR3 RAM Motherboard Support HDMI Klipper/Debian for PI4B Adapter V1.0,Raspberry-pi 4 Manta E3 EZ,Manta M4P/Manta M5P/M8P 3D Printer Motherboard
Asin: B0BLBV9FNY | Model: US66-1020000405 | PartNumber: US66-1020000405
☃️. Btt Cb1 V2.2 Quad-Core Architecture Is 62Bit ,Arm Cortex-A53 @ 1.5Ghz Processor ,1Gb Ddr3 Ram.
☃️.Bigtreetech Cb1 V2.2 Core Board Can Run Linux / Support Debian / Progammable,High Speed And High Stability, And Is Convenient For Users To Diy.Compatible With Manta M4p/Manta M5p/Manta M8p/Manta E3 Ez 3D Printer Moterboard To Running Klipper Firmware.
☃️. Bigtreetech Cb1 Network Support 100M Ethernet +100M Wifi.
☃️. Display Adopts Malig32 Mp2 Gpu,Support Opengl3.2 And Hdmi2.0A Uhd 4K Video & Audio Output,Onboard Usb2.0 Port.Powerful High Performance Details And Clarity.(Such As Btt Hdmi5 V1.1).
Features
- .BIGTREETECH CB1 V2.2 Size is the same BTB header as the For Raspberry -Pi CM4 It can be directly installed with Pi4b adapter or Raspberry-Pi,Highly cost effective way to run your Klipper.
- . Display Adopts MaliG32 MP2 GPU,Support OpenGL3.2 and HDMI2.0A UHD 4K Video & Audio output,onboard USB2.0 port.Powerful High Performance details and clarity.(such as BTT HDMI5 V1.1)
- . BTT CB1 V2.2 quad-core architecture is 62bit ,ARM Cortex-A53 @ 1.5GHz processor ,1GB DDR3 RAM
- . BIGTREETECH CB1 Network Support 100M Ethernet +100M WIFI
- .BIGTREETECH CB1 V2.2 Core board can run Linux / Support Debian / progammable,High Speed and high stability, and is convenient for users to DIY.compatible with Manta M4P/Manta M5P/Manta M8p/Manta E3 EZ 3D Printer moterboard to running Klipper firmware
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.65 x 2.48 x 3.30 inches
See On Amazon #15
BIGTREETECH SKR 3 EZ Mainboard Silent Motherboard 48V High Speed Printing Support Marlin &Klipper Firmware Compatible with EZ2209 EZ5160 TMC5160 TMC2209 Driver for 3D Printer DIY Control Board
Asin: B0B1Q26SWR
☆【Updates Of Processor】The New Processor Of Skr 3 Ez Controller Is Upgraded To 32-Bit 550Mhz Arm Cortex-M7 Series Stm32h723vgt6, With Which The Running Speed And Printing Accuracy Of Skr 3 Controller Is Greatly Increased By 30%+ While Its Working Noise Become Lower. Its Upgraded Thermistor Supports Pt1000, Exempting The Need Of External Module..
☆【About Firmware】Skr 3 Ez Silent Board Compatible With Three Firmware Marlin, Klipper And Reprap, Which Are Widely Used In The 3D Printing World. Firstly Download Firmware On Github Website Of Name “Firmware.Bin”, Copy And Save It To Sd Card, Firmware Must Bed Reserved, Then Re-Plug The Sd Card And Wait To 10S. When The Status Indicator Stops Flashing And The File Name In The Sd Card Is Renamed To “Firmware.Cur” Then Update Successfully. Note: Our Control Board Come Without Sd Card..
☆【Diy Friendly Interfaces】Boot0 Is Added For Programming Firmware In Dfu Mode. Wifi Module (Esp-12S, Esp-07S, Esp32) Is Reserved. Skr 3 Ez Motherboard Also Supports Bltouch, Resume Printing Function, Rgb Lights, Blocking Detection And Shutdown After Printing Function. What’S More, It’S Also Compatible With Tft35 E3 V3.0/Tft35 V3.0/Tft28 V3.0/12864 Lcd Display As Well As Ez2209/Ez2208/Ez5160, Tmc2209/Tmc2208/ Tmc5150/Drv8825 Stepper Motor Drivers..
☆【Safe Anti-Misplugging Design】Wrong Installation Of Drivers Will Not Only Cause Damage To The Drivers Itself But Even Ruin The Motherboard Or Catch Fire. And According To Our Survey, 40% Users May Misplug The Drivers Unintentionally. Our New Arrivals Skr 3 Ez Motherboard And Ez Series Drivers, Featuring An Unprecedented Anti-Misplugging Design, Can Totally Remove Such Hidden Dangers To Offer You A Better And Safer Printing Experience! (Traditional Tmc Drivers Is Still Compatible.).
Features
- 48V High Speed Printing Motor voltage of SKR 3 EZ varies from 12V to 48V (need to use EZ5160 Pro driver for 48V) while SKR 3 varies from DC 12V to 24V. Higher voltage can extremely improve your printing speed and you can adjust it with a jumper cap. What's more, SKR 3 owns 2 normal fans, and the EZ version owns 3 normal fans, which can ensure the smooth operation of your printer and advance your printing quality.
- Safe Anti-misplugging Design Wrong installation of drivers will not only cause damage to the drivers itself but even ruin the motherboard or catch fire. And according to our survey, 40% Users may misplug the drivers unintentionally. Our new arrivals SKR 3 EZ motherboard and EZ series drivers, featuring an unprecedented anti-misplugging design, can totally remove such hidden dangers to offer you a better and safer printing experience! (Traditional TMC drivers is still compatible.)
- Updates of Processor The new processor of SKR 3 EZ controller is upgraded to 32-bit 550MHz ARM Cortex-M7 series STM32H723VGT6, with which the running speed and printing accuracy of SKR 3 controller is greatly increased by 30%+ while its working noise become lower. Its upgraded thermistor supports PT1000, exempting the need of external module.
- DIY Friendly Interfaces BOOT0 is added for programming firmware in DFU mode. WIFI module (ESP-12S, ESP-07S, ESP32) is reserved. SKR 3 EZ motherboard also supports bltouch, resume printing function, RGB lights, blocking detection and shutdown after printing function. What s more, it s also compatible with TFT35 E3 V3.0/TFT35 V3.0/TFT28 V3.0/12864 LCD display as well as EZ2209/EZ2208/EZ5160, TMC2209/TMC2208/ TMC5150/DRV8825 stepper motor drivers.
- About Firmware SKR 3 EZ silent board compatible with three firmware Marlin, Klipper and RepRap, which are widely used in the 3D printing world. Firstly download firmware on GitHub website of name firmware.bin , copy and save it to SD card, firmware must bed reserved, then re-plug the SD card and wait to 10s. When the status indicator stops flashing and the file name in the SD card is renamed to FIRMWARE.CUR then update successfully. Note: Our control board come without SD card.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #16
WiFi Module for FDM 3D Printers, YOUYOUTE Wireless Transferred Slicing Data to microsd Card FDM Printer, High Speed Small Size and MD5 Integrity Check
Asin: B0CLNYBX18 | Model: WS1 | PartNumber: WS1 | Ean: 0785691430441 | UPC: 785691430441
【High-Speed】1.8Mb/S, Faster Than Similar Products, Md5 Check Slicing Data Integrity. You Can Manage Slicing Data On The Computer Via A Web Management User Interface..
【Warranty】One-Year Warranty. Any Problem Please Contact Us Via Amazon Message..
【High Efficiency】Avoid Printing Failures Caused By Lost Files, Damaged Memory Cards, Incomplete Files, Etc. Multiple Printers Can Be Managed On One Computer..
【Easy To Use】No Power Required. Just Plug One Cable Into The Printer's Micro Card Slot. No Need To Update Firmware And No Need To Disassemble Printer..
Features
- Professional Design Designed for FDM printers that do not have a wireless transmission module. Our Wifi box simplifies operation by wirelessly transferring slice data from the computer to the printers. The module can only be used in the following three slicing software Prusaslicer ,Ultimaker Cura &OrcaSlicer.
- Easy to use No power required. Just plug one cable into the printer's micro card slot. No need to update firmware and no need to disassemble printer.
- High-speed 1.8MB/S, faster than similar products, MD5 check slicing data integrity. You can manage slicing data on the computer via a WEB management user interface.
- High Efficiency Avoid printing failures caused by lost files, damaged memory cards, incomplete files, etc. Multiple printers can be managed on one computer.
- Warranty One-year warranty. Any problem please contact us via Amazon message.
- See more on Amazon...
Brand: YOUYOUTE | Manufacturer: YOUYOUTE
Dimensions: 1.50 x 5.30 x 3.70 Inches | Weight: 0.15 Pounds
Warranty: 1 year manufacturer
See On Amazon #17
BIGTREETECH KNOMI V1.0 Display Screen 1.28inch UI LCD for Voron StealthBurner Support Klipper Compatible with EBB SB2240/SB2209 CAN 3D Printer Parts
Asin: B0C5LG4DNH | Model: BIGTREETECH KNOMI V1.0 | PartNumber: BIGTREETECH KNOMI V1.0
✅Knomi Size Is1.28Inch 240Rgbx240dots Resolution 400Cd/M Brightness Wide Viewing Angle For Optimal Visibility，Ensuring Effortless Monitoring Of Your 3D Printing Process Throughout..
✅Knomi Btt Support 5-24V Dc Input Voltage,Knomi Can Be Easily Powered By A Variety Of Sources, Ebb Sb2240/Sb2209 Can Is On Ideal Supporting Solution For Knomi,High Compatible And With A Dedicated Port Fir Easy Power Suppply..
✅Bigtreetech Knomi Ui Is An Open-Source Product That Allows Users To Customize The User Interface And Design Mounting Brackets To Fit Their Specific 3D Printer,Perfect For Voron Stealthburner, Use The Print File Provided By Bigtreetech..
✅Btt Knomi Display Reserved Type-C Port For Diy Burn, Wider Usage Range And Built In Esp32 Wifi Module Allow Knomi To Easily Communicate With Your Printer Via A Wi-Fi Connection,Reduce Constraints On Installation Position..
Features
- BIGTREETECH KNOMI Display designed for Klipper Firmware,it can quick and easy monitoring of printer status. such as Heated Bed-warming up Standby,Nozzle Warming Up,Leveling, Ready to Print, Start printing,printing progress,print completed.
- BTT KNOMI Display reserved Type-C port for DIY burn, Wider usage range and Built in ESP32 wifi Module Allow KNOMI to easily communicate with your printer via a WI-FI connection,Reduce constraints on installation position.
- KNOMI size is1.28inch 240RGBx240Dots Resolution 400Cd/m Brightness Wide Viewing Angle for Optimal Visibility ensuring effortless monitoring of your 3D Printing process throughout.
- BIGTREETECH KNOMI UI is an open-source product that allows users to customize the user interface and design mounting brackets to fit their specific 3D printer,perfect for Voron StealthBurner, Use the print file provided by BIGTREETECH.
- KNOMI BTT support 5-24V DC input voltage,KNOMI can be easily powered by a variety of sources, EBB SB2240/SB2209 CAN is on ideal supporting solution for KNOMI,High compatible and with a dedicated port fir easy power suppply.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.03 x 1.55 x 1.36 inches
See On Amazon #18
BIGTREETECH SKR V1.4 Turbo 32Bit Control Board 120MHZ Support 5 axis TMC2209 Stepper Motor Driver Support TFT35 E3 V3.0.1 TFT50/70 HDMI5 V1.1 Touch Screen Display for Ender 3 CR10 Voron DIY Board
Asin: B082V344QK | Model: BIGTREETECH | PartNumber: BIGTREETECH
👉【Multi-Function Interface】Btt Skr V1.4 Turbo Support Resume Printing While Power Off, Filament Break Detection,Automatic Shutdown After Printing,Bltouch,Biqu Microprobe V2.0 And So On, I2c, Spi And Wifi Interfaces Are Reserved For Convenience Of Diy,Closed-Loop Drive Interface Is Reserved To Reduce The Trouble Of Plug-In Switching Module.
👉【Multiple Upgrades 】Using Dedicated Power Chip M6130, Support 12-24V Power Input And Removable Fuse Makes The Replacement Process Easier,High Performance Mosfet Tube, Better Heat Dissipation Effect;.
👉【Multi-Size Screen Support】Tft24/Tft28/Tft35/Tft43/Tft50/Tft70 Seires Touch Screen Display Under Bigtreetech Brand, Lcd2004, Lcd12864 Screen.When Running Klipper Touch Mode,Choose Hdmi5/7 Touchscreen. Can Running Klipper Touch Mode.
👉【Dual Working Modes】The Skr V1.4 Turbo Mainboard Has A Connector For Wifi Modules Esp-01S.Onboard Spi And Uart Working Mode Driven By The Tmc Driver, Such As Tmc2209 V1.3 /Tmc2208/Tmc5160t Pro,Also Having The Diag Pin, Which Eliminates Complex Wiring Process And Can Be Used By Simple Unplugging Jumper Cap..
👉【High Performance Chipset】Bigtreetech Skr V1.4 Turbo Control Board Is Adopts 32-Bit Arm Cortex-M3 Processor Lpc1769 Main Control Chip With 120 Mhz Arm Level. Equipped With Highly Modular And Open Source Firmware Marlin,Which Is Convenient For Users To Diy And Secondary Development.Compatible With Btt Pi V1.2 Or Cb1+Pi4b Support Running Klipper Firmware..
Features
- 100% Guarenteed After-sale Services If you have any problems about this SKR V1.4 Turbo Motherboard, please feel free to contact us, we have professional after sales engineer will give you satisfied after-sales service.
- High Performance Chipset BIGTREETECH SKR V1.4 Turbo control board is adopts 32-bit ARM Cortex-M3 processor LPC1769 main control chip with 120 MHz ARM level. Equipped with highly modular and open source firmware Marlin,which is convenient for users to DIY and secondary development.compatible with btt pi v1.2 or CB1+pi4b support running Klipper firmware.
- Multi-function interface BTT SKR V1.4 turbo support Resume Printing While Power Off, Filament Break Detection,Automatic Shutdown After Printing,BLtouch,BIQU MicroProbe V2.0 and so on, I2C, SPI and WIFI interfaces are reserved for convenience of DIY,Closed-loop drive interface is reserved to reduce the trouble of plug-in switching module
- Dual Working modes The SKR V1.4 Turbo mainboard has a connector for WiFi modules ESP-01S.Onboard SPI and UART working mode driven by the TMC driver, such as TMC2209 V1.3 /TMC2208/TMC5160T Pro,also having the DIAG pin, which eliminates complex wiring process and can be used by simple unplugging jumper cap.
- Multiple upgrades Using dedicated power chip M6130, support 12-24V power input and removable fuse makes the replacement process easier,High performance MOSFET tube, better heat dissipation effect;
- Multi-size screen support TFT24/TFT28/TFT35/TFT43/TFT50/TFT70 Seires touch screen display under BIGTREETECH brand, LCD2004, LCD12864 screen.when running Klipper touch mode,choose HDMI5/7 touchscreen. can running Klipper touch mode
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.78 x 4.33 x 3.34 inches
See On Amazon #19
OSOYOO 3D Printer Controller Kit Ramps 1.4 + Full Graphic Smart Display Controller + Mega2560 + A4988 Stepper Motor Driver for RepRap (Ramps 1.4+12864LCD+Mega2560+A4988Driver)
Asin: B0111ZSS2O | Model: 12864-3D | PartNumber: 12864-3D | Ean: 0701948408902 | UPC: 701948408902
With Lcd 12864, You Can Easy Connect It To Your Ramps Board Using The "Smart Adapter" Included. After Connecting This Panel To Your Ramps You Don't Need Your Pc Any More, The Smart Controller Supplies Power For Your Sd Card. Further More All Actions Like Calibration, Axes Movements Can Be Done By Just Using The Rotary Encoder On The Smart Controller. Print Your 3D Designs Without Pc, Just With A G-Code Design Stored On The Sd Card..
Please Note : No Technical Support For This Product..
It Is Designed To Fit The Entire Electronics Needed For A Reprap In One Small Package For Low Cost.
3D Printer Controller Ramps 1.4 Interfaces A Compatible Arduino Mega2560 Board. The Modular Design Includes Plug In Stepper Drivers And Extruder Control Electronics On An Arduino-Compatible Mega Shield For Easy Service, Part Replacement, Upgrade-Ability And Expansion.
Features
- 3D Printer Controller RAMPS 1.4 interfaces a Compatible Arduino Mega2560 board. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion
- 3D Printer Controller RAMPS 1.4 interfaces a Compatible Arduino Mega2560 board. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion
- With LCD 12864, you can easy connect it to your Ramps board using the smart adapter included. After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
- It is designed to fit the entire electronics needed for a RepRap in one small package for low cost
- Please Note : No technical support for this product.
- See more on Amazon...
Brand: OSOYOO | Manufacturer: OSOYOO
See On Amazon #20
AITRIP LCD 2004 LCD Screen Smart Display Screen Controller Module with Cable for RAMPS 1.4 Compatible with Arduino Mega Pololu Shield for Reprap 3D Printer Kit Accessory
Asin: B08HLSCHVL | Model: ECLCD2004 | PartNumber: ECLCD2004 | Ean: 0701715443778 | UPC: 701715443778
2004 Lcd Smart Controller For 3D Printer，Supports For Ramps 1.4 Control Board.
A Lcd Display Module With Blue Backlight, Small And Light Appearance, Suitbale For Copiers, Fax Machines, Laser Printers, Industrial Test Equipment, Networking.
This Panel Connect Your Ramps 1.4. 3D Design Print Without A Computer, Just Use The G Code Design Stored On The Sd Card, Sd Card Intelligent Controller Power Supply. With Smart Lcd Controller You Can Print 3D Designs Without Usb Connection To Your Computer.
Lcd Control Panel Through Which You Can Achieve Spooling Is The 3D Model Gcode Files Are Copied To The Sd Card, And Then Print The File Via The Lcd Control Panel.
Features
- Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc
- LCD control panel through which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then print the file via the LCD control panel
- 2004 LCD smart controller for 3D printer Supports for RAMPS 1.4 control board
- This panel connect your RAMPS 1.4. 3D design print without a computer, just use the G code design stored on the SD card, SD card intelligent controller power supply. With Smart LCD Controller you can print 3D designs without USB connection to your computer
- A LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #21
RTELLIGENT Stepper Motor Driver Nema 34 CNC Controller Control Hybrid Bipolar 2.4A~7.2A AC DC Power Supply with 400-51200 Micro-Step Resolutions
Asin: B07S897BZZ | Ean: 0767912391502 | UPC: 767912391502
Low Noise: Based On Advanced Control Algorithm, The Motor Driver Can Run With Low Noise And Low Vibration.
Warranty: Our Step Driver Cnc Controller Has 12 Months Warranty. Ce, Iso Certificated.
This R86 Stepper Motor Driver Can Control Almost All Of 2 Phase Nema 34 Stepper Motors 86Mm Flange Whose Current Is Under 7.2A. Typically Used For X-Y-Z Tables, 3D Printer, Laser Cutter, Engraving Machine, Etc..
High Precision: This Step Motor Driver Has 16 Kinds Of Micro-Steps, The Maximum Step Number Is 51200 Steps, Providing Super High Precision Operation.
Features
- Bipolar Stepper Driver: 24~100V DC or 18~80V AC power supply, 2.4A~7.2A output current peak (8 current modes optional). Support PUL/DIR modes. Support offline. Size: 151*97*52mm (5.94*3.82*2.05 in)
- High Precision: This step motor driver has 16 kinds of micro-steps, the maximum step number is 51200 steps, providing super high precision operation
- Low Noise: Based on advanced control algorithm, the motor driver can run with low noise and low vibration
- This R86 stepper motor driver can control almost all of 2 phase nema 34 stepper motors 86mm flange whose current is under 7.2A. Typically used for X-Y-Z tables, 3D printer, laser cutter, engraving machine, etc.
- Warranty: Our step driver CNC controller has 12 months warranty. CE, ISO Certificated
- See more on Amazon...
Brand: RTELLIGENT | Manufacturer: RTELLIGENT
Dimensions: 2.05 x 5.94 x 3.82 inches
See On Amazon #22
Respicefinem 2004 LCD Module anet a8 Screen 18 10 4 LCD Display Control Board Controller Display with 5 pin Cable for a8 a4 a6 l e2 ctrol 2004 LCD anet a8
Asin: B0D2NBQDD2 | Model: Respicefinemp38vz6y2ae | PartNumber: Respicefinemp38vz6y2ae
Smart And Efficient Control : To Work With The Ramps.4 Control Board, Our Lcd Display Simplifies And Greatly Improves Working Efficiency. Take Control Of Your Printer With Ease.
Lcd Module: This Product Is Equipped With High Definition Lcd Module, Which Perform Various Complex Data Display And To Facilitate Your Various Use Needs..
Wide Compatibility: Wide Variety Of Printers, Such Anet A8, A6, A4, E2, A6 L, For Wide Range Of Applications..
Anet A8 Screen, Perfectly Compatible: Allows For Wide Application On Various Printer, Including For Anet A8, For A6, For A4, For E2, For A6 L And More..
Features
- efficient cables: equipped with cables and controller modules to for stable and effective of the equipment, providing you with use experience.
- anet a8 screen, perfectly compatible: allows for wide application on various printer, including for anet a8, for a6, for a4, for e2, for a6 l and more.
- smart and efficient control : to work with the ramps.4 control board, our lcd display simplifies and greatly improves working efficiency. take control of your printer with ease
- wide compatibility: wide variety of printers, such anet a8, a6, a4, e2, a6 l, for wide range of applications.
- lcd module: this product is equipped with high definition lcd module, which perform various complex data display and to facilitate your various use needs.
- See more on Amazon...
Brand: Respicefinem | Manufacturer: Respicefinem
See On Amazon #23
Upgrade Control Board with 8 Axes for Voron 3D Printer Supports 2.0.x and Klipper DIY Support for A4988 TMC2209 DC12 24V Input LCD Graphic Display Screen
Asin: B0D2LQ61L9 | Model: Hyuduo0dq3m5yk9z | PartNumber: Hyuduo0dq3m5yk9z
[Multiple Functions] With Dc12‑24V Input And 2 X Mp1584en Outputs Dc12v, This Mainboard Also Includes Spi Communication Microstorage Card Slot And Reserved Spi Signal Interface, Catering To Various Printing Needs. [+].
[Upgrade Control Board] The Monster8 V2 Is An Advanced Version With Enhanced Safety Circuits And Standout Features, Including Independent Dc5v For Raspi And Wifi Interface For Rrf Firmware. [+].
[8 Axes Control] Specifically Designed For Voron Printers, Supporting 2.0.X And Klipper Hardware. Compatible With Mks Mini12864 Lcd Display, Offering U Disk Printing And Dfu Mode Setting Via Booto Button. [+].
[Lcd Graphic Display Screen] Equipped With Rgb Backlit For Dynamic Color Adjustments, This Screen Supports 2.0, Klipper Firmware. It Comes With An Encoder For Precise Parameter Adjustments And File Selection Printing. Plug And Play For Ramps, Slight Firmware Modification Required. [+].
Features
- [Diy Support] Featuring 8 stepper drivers and 9 motor interfaces, this control board allows versatile diy upgrades with popular motor drivers like a4988, drv8825, tmc2209. compatible with voron 2.4, ender 3 series, requiring firmware update on github. [+]
- [Lcd Graphic Display Screen] Equipped with rgb backlit for dynamic color adjustments, this screen supports 2.0, klipper firmware. it comes with an encoder for precise parameter adjustments and file selection printing. plug and play for ramps, slight firmware modification required. [+]
- [Multiple Functions] With dc12 24v input and 2 x mp1584en outputs dc12v, this mainboard also includes spi communication microstorage card slot and reserved spi signal interface, catering to various printing needs. [+]
- [8 Axes Control] Specifically designed for voron printers, supporting 2.0.x and klipper hardware. compatible with mks mini12864 lcd display, offering u disk printing and dfu mode setting via booto button. [+]
- [Upgrade Control Board] The monster8 v2 is an advanced version with enhanced safety circuits and standout features, including independent dc5v for raspi and wifi interface for rrf firmware. [+]
- See more on Amazon...
Brand: Hyuduo | Manufacturer: Hyuduo
See On Amazon #24
3D Printer Control Board, MKS TinyBee V1.0 ESP32 3D Printer Control Board Wide Compatibility Good Performance Premium, Circboard Prototyping Boards
Asin: B0D2JCGYGM | Model: Fafeicyo1q0rfxm3h | PartNumber: Fafeicyo1q0rfxm3h
[Powerful Performance] - Equipped With Esp32 Wroom 32U Module With Dual Core 32-Bit High-Speed Mcu, Clock Frequency Up To 240 Mhz, And Integrated Wifi Andmodules..
[Large Memory] - In Addition, The Module Is Equipped With An 8 Megabyte Flash Storage Chip, Providing Effective Protection For More Application Scenarios..
[Premium Design] - Features Esp32 Wroom 32U With 8M Flash, Built-In Esp32 Dowd V3 Chip, Xtensa Dual Core 32-Bit Lx6 Microprocessor..
[Wide Compatibility] -Mks Tinybee Is A 3D Printer Control Board With Onboard Esp32 Wifi. Supports For Marlin 2.0 Firmware. In Addition To Supporting Regular Lcd2004 And 12864 Screens, It Also Supports Mks Mini12864 V3 And Mks Tft Serial Port Screens. The Motherboard Can Update Firmware Through Usb And Connect To The Network And Web Pages Through Wifi Function To Control The 3D Printer..
Features
- asy to Install: Comes with a compact size and a light weight as well, the 3D printer control board is very convenient to install within minutes.
- [WIDE COMPATIBILITY] -MKS TinyBee is a 3D printer control board with onboard ESP32 wifi. Supports for Marlin 2.0 firmware. In addition to supporting regular LCD2004 and 12864 screens, it also supports MKS MINI12864 V3 and MKS TFT serial port screens. The motherboard can update firmware through USB and connect to the network and web pages through WIFI function to control the 3D printer.
- [POWERFUL PERFORMANCE] - Equipped with ESP32 WROOM 32U module with dual core 32-bit high-speed MCU, clock frequency up to 240 MHz, and integrated WIFI andmodules.
- [PREMIUM DESIGN] - Features ESP32 WROOM 32U with 8M Flash, built-in ESP32 DOWD V3 chip, Xtensa dual core 32-bit LX6 microprocessor.
- [LARGE MEMORY] - In addition, the module is equipped with an 8 megabyte Flash storage chip, providing effective protection for more application scenarios.
- See more on Amazon...
Brand: Fafeicy | Manufacturer: Fafeicy
See On Amazon #25
Super Quiet 32 Bit 8 Axes 3D Printer Control Board with SPI Communication USB Printing and DFU Mode for Voron 2.4 Creality Ender 3 Ender 3 V2 and Ender 3 Pro
Asin: B0D2FPW53C | Model: WALFRONTs8tghvm6p0 | PartNumber: WALFRONTs8tghvm6p0
Dc12‑24V Input: This 3D Printer Motherboard Has Dc12‑24V Inputs, (2 For Mp1584en Outputs Dc12v For Fan And Dc5v), Integrated Spi Communicating For Micro Storage Card And Reserved Spi Signal Interface, Which Is Very Practical..
Good Compatibility: This 32 Bit Motherboard Is Compatible And Supports Multiple For A4988, For Drv8825, For Lv8729, For Tmc2208, For Tmc2209, For Tmc2225, For Tmc2226 And Other Motor Drivers, Which Grants More Flexible Diy Upgradability. It Can Be Used On For Voron 2.4, For Creality Ender 3, For Ender 3 V2 And For Ender 3 Pro..
Super Quiet: This 3D Printer Control Board Is Super Quiet, It Runs With Low Noise And Good Performance To Prevent Overheating, It Has A Sleek Surface Which Makes It Easier To Grip And Control..
8 Axes Design: This 3D Printer Silent Board Is An 8 Axes Control Board That Can Use For Voron, Support For Marlin 2.0.X And For Klipper Hardware, Compatible With For Mksts35mks, For Mini12864 Lcd Screen, Support Usb Stick Printing And Dfu Mode Setting Via For Booto Button..
Features
- Multiple Functional Interfaces: This 3D printer main board adds independent DC5V, reserves for Robin WIFl interface for RRF firmware, adds more conservation circuits, and reserves more functional interfaces, while retaining the original functions.
- 8 Axes Design: This 3D printer silent board is an 8 axes control board that can use for voron, support for marlin 2.0.x and for klipper hardware, compatible with for MKSTS35MKS, for MINI12864 LCD screen, support USB stick printing and DFU mode setting via for Booto button.
- DC12 24V Input: This 3D printer motherboard has DC12 24V inputs, (2 for MP1584EN outputs DC12V for fan and DC5V), integrated SPI communicating for micro storage card and reserved SPI signal interface, which is very practical.
- Super Quiet: This 3D printer control board is super quiet, it runs with low noise and good performance to prevent overheating, it has a sleek surface which makes it easier to grip and control.
- Good Compatibility: This 32 bit motherboard is compatible and supports multiple for A4988, for DRV8825, for LV8729, for TMC2208, for TMC2209, for TMC2225, for TMC2226 and other motor drivers, which grants more flexible DIY upgradability. It can be used on for Voron 2.4, for Creality Ender 3, for Ender 3 V2 and for Ender 3 pro.
- See more on Amazon...
Brand: Walfront | Manufacturer: WALFRONT
See On Amazon #26
168Mhz 8 Axes 32 Bit 3D Printer Control Board DC12 24V Super Quiet Compatible for Voron Ender3 Pro with 32 Bit Motherboard Support Klipper
Asin: B0D2FG8NK8 | Model: WALFRONTpxemgfvkwn | PartNumber: WALFRONTpxemgfvkwn
Dc12‑24V Input: This 3D Printer Motherboard Has Dc12‑24V Inputs, (2 For Mp1584en Outputs Dc12v For Fan And Dc5v), Integrated Spi Communicating For Micro Storage Card And Reserved Spi Signal Interface, Which Is Very Practical..
Good Compatibility: This 32 Bit Motherboard Is Compatible And Supports Multiple For A4988, For Drv8825, For Lv8729, For Tmc2208, For Tmc2209, For Tmc2225, For Tmc2226 And Other Motor Drivers, Which Grants More Flexible Diy Upgradability. It Can Be Used On For Voron 2.4, For Creality Ender 3, For Ender 3 V2 And For Ender 3 Pro..
Super Quiet: This 3D Printer Control Board Is Super Quiet, It Runs With Low Noise And Good Performance To Prevent Overheating, It Has A Which Makes It Easier To Grip And Control..
8 Axes Design: This 3D Printer Silent Board Is An 8 Axes Control Board That Can Use For Voron, Support For 2.0.X And For Klipper Hardware, Compatible With For Mksts35mks, For Mini12864 Lcd Screen, Support Usb Stick Printing And Dfu Mode Setting Via For Booto Button..
Features
- Multiple Functional Interfaces: This 3D printer main board adds independent DC5V, reserves for Robin WIFl interface for RRF firmware, adds more conservation circuits, and reserves more functional interfaces, while retaining the original functions.
- 8 Axes Design: This 3D printer silent board is an 8 axes control board that can use for voron, support for 2.0.x and for klipper hardware, compatible with for MKSTS35MKS, for MINI12864 LCD screen, support USB stick printing and DFU mode setting via for Booto button.
- DC12 24V Input: This 3D printer motherboard has DC12 24V inputs, (2 for MP1584EN outputs DC12V for fan and DC5V), integrated SPI communicating for micro storage card and reserved SPI signal interface, which is very practical.
- Super Quiet: This 3D printer control board is super quiet, it runs with low noise and good performance to prevent overheating, it has a which makes it easier to grip and control.
- Good Compatibility: This 32 bit motherboard is compatible and supports multiple for A4988, for DRV8825, for LV8729, for TMC2208, for TMC2209, for TMC2225, for TMC2226 and other motor drivers, which grants more flexible DIY upgradability. It can be used on for Voron 2.4, for Creality Ender 3, for Ender 3 V2 and for Ender 3 pro.
- See more on Amazon...
Brand: Walfront | Manufacturer: WALFRONT
See On Amazon #27
3D Printer Motherboard 32 Bit Offline Controller Display Screen 3D Printer Control Board for MKS Motherboard
Asin: B0D2BLYGBK | Model: FTVOGUEe2nx701cf6 | PartNumber: FTVOGUEe2nx701cf6
[Diy Support] With 8 Stepper Drivers And 9 Motor Interfaces, This 3D Printer Control Board Allows Flexible Diy Upgrades With Various Motor Drivers Like A4988, Drv8825, Lv8729, Tmc2208, Tmc2209, Tmc2225, Tmc2226. Compatible With For Voron 2.4, For Ender 3 Series. Firmware Update Required On For Github..
[Lcd Graphic Display Screen] With Rgb Backlit, Allows For Online Changes In Light Color. Supports For Marlin 2.0, For Klipper Firmware. Equipped With Encoder, Can Achieve Parameter Adjustment And File Selection Printing. Plug And Play On For Ramps, But Requires Modifying Firmware Support..
[Multiple Functions] The 3D Printer Mainboard Features Dc12‑24V Input, 2 X Mp1584en Outputs Dc12v (For Fans) And Dc5v, Spi Communication Microstorage Card Slot, And Reserved Spi Signal Interface..
[8 Axes Control] This Is Designed For Voron Printers, Supporting For Marlin 2.0.X And For Klipper Hardware, Compatible With For Mks Mini12864 Lcd Display. Supports U Disk Printing And Dfu Mode Setting Via Booto Button..
Features
- [Upgrade Control Board] for Monster8 V2 is an upgraded version of for Monster8 V1 that offers more safety circuits and additional features, including independent DC5V for RasPi and WIFl interface for RRF firmware.
- [8 Axes Control] This is designed for Voron printers, supporting for Marlin 2.0.x and for Klipper hardware, compatible with for MKS MINI12864 LCD display. Supports U disk printing and DFU mode setting via Booto button.
- [DIY Support] With 8 stepper drivers and 9 motor interfaces, this 3D printer control board allows flexible DIY upgrades with various motor drivers like A4988, DRV8825, LV8729, TMC2208, TMC2209, TMC2225, TMC2226. Compatible with for Voron 2.4, for Ender 3 series. Firmware update required on for Github.
- [Multiple Functions] The 3D printer mainboard features DC12 24V input, 2 x MP1584EN outputs DC12V (for fans) and DC5V, SPI communication microstorage card slot, and reserved SPI signal interface.
- [LCD Graphic Display Screen] With RGB backlit, allows for online changes in light color. Supports for Marlin 2.0, for Klipper firmware. Equipped with encoder, can achieve parameter adjustment and file selection printing. Plug and play on for RAMPS, but requires modifying firmware support.
- See more on Amazon...
Brand: FTVOGUE | Manufacturer: FTVOGUE
See On Amazon #28
Therapeutic Body Relief Device, Therapeutic Device Skin Care Fit for, E2 3, Blue BackliControl Board for 3D PartQ
Asin: B0BG5ZXGR2
【Wide In Match】The 3D Printer Lcd Display Supports For Ramps 1.4 Control Board, The Lcd Display Will Largely Simply The Operation And Improve Working Efficiency. Allows For Wide Application On Various 3D Printer, Including For Anet A8, For A6, For A4, For E2 3D, For A6 L And More..
【Customer Service Promise】If There Are Any Issue, Please Feel Free To Contact Us. We Will Reply To Your Questions Within 24 Hours And Help To Fix The Issue. We Are Obligate To Make Sure That Our Customers Are Satisfied With Our Products And Services..
【Specification】Item Type: Lcd Display Control Board; Cable Specifications: 3D Printer Gray Line: 50Cm / 19.69In(Approx.)Length, Double Row 5P, 2561; Insulation Resistance: 1000Mω, Dc 500V, Min; Contact Resistance: 15Mω, Maximum; Operating Temperature: -40℃ To +105℃..
【Clear Display】Comes With A Large Size Of 3.1In, The Lcd Display Screen With White Character And Blue Backlight Enables Clear Viewing. The Double Row 5Pin Cable Ensures Firm Connection And Stable Transmission, Also Very Easy To Use, Just Plug And Play..
Features
- EASY TO INSTALL The LCD display control board is lightweight and compact in size as well, the convenient installation can be quickly completed within minutes. A useful accessory for 3D printers with good performance in all aspects, good value for money.
- CLEAR DISPLAY Comes with a large size of 3.1in, the LCD display screen with white character and blue backlight enables clear viewing. The double row 5pin cable ensures firm connection and stable transmission, also very easy to use, just plug and play.
- WIDE IN MATCH The 3D printer LCD display supports for RAMPS 1.4 control board, the LCD display will largely simply the operation and improve working efficiency. Allows for wide application on various 3D printer, including for Anet A8, for A6, for A4, for E2 3D, for A6 L and more.
- SPECIFICATION Item type: LCD display control board; cable specifications: 3d printer gray line: 50cm / 19.69in(approx.)length, double row 5p, 2561; insulation resistance: 1000m , dc 500v, min; contact resistance: 15m , maximum; operating temperature: -40 to +105 .
- CUSTOMER SERVICE PROMISE If there are any issue, please feel free to contact us. We will reply to your questions within 24 hours and help to fix the issue. We are obligate to make sure that our customers are satisfied with our products and services.
- See more on Amazon...
Brand: Asixxsix | Manufacturer: Asixxsix
See On Amazon #29
BIGTREETECH SKR Mini E3 V2.0 Control Board+TFT35 E3 V3.0.1 Touch Screen Display 32Bit Silent Board Integrated with TMC2209 UART Stepper Driver for Ender 3 Ender 5 Ender 3 V2 3D Printer Motherboard
Asin: B089DBS62S | Model: VVV001854-0529 | PartNumber: VVV001854-0529
🌈Bigtreetech Skr Mini E3 V3.0 32 Bit Control Board Increase The Distance Between The Driving Chip And The Components To Avoid The Trouble Caused By The Heat Sink..
🌈For More Information Of Skr Mini E3 V2.0 Control Board,Please Search Bigtreetech At Github. Or You Could Contact Us Via Amazon Message, Our Professional Tech Supports Are Here To Help You. 1-Year Warranty Is 100% Guaranteed..
🌈Big Tree Tech Skr Mini E3 V2.0 Optimize The Plate And Frame To Avoid The Phenomenon Of Screw Hole Gap And Screws Hitting Components..
🌈Btt Skr Mini E3 V2.0 Added Parallel Double Z-Axis Interface; Add Protection Device To The Thermistor Interface..
Features
- Combo Sets: Comes with BIGTREETECH SKR MINI E3 V2.0 control board and TFT35 E3 V3.0.1 Touch screen display with dual modes, which also supports LCD 12864 display, perfect Kit For Ender 3.compatible with Ender 5/Ender 5 Pro,Ender 3 pro
- BTT SKR MINI E3 V2.0 Added parallel double Z-axis interface; Add protection device to the thermistor interface.
- Bigtreetech skr mini e3 v3.0 32 bit control board increase the distance between the driving chip and the components to avoid the trouble caused by the heat sink.
- big tree tech skr mini e3 v2.0 Optimize the plate and frame to avoid the phenomenon of screw hole gap and screws hitting components.
- For more information of SKR MINI E3 V2.0 control board,Please search BIGTREETECH at GitHub. Or you could contact us via Amazon message, our professional tech supports are here to help you. 1-Year warranty is 100% guaranteed.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Direct
See On Amazon #30
BIGTREETECH SKR Mini E3 V3.0 32Bit Silent Control Board for Ender 3, Ender 3 V2.0,Ender3 Pro, Ender 3 S1 3D Printer with TMC2209 UART Stepper Driver,Support Marlin/Klipper,Compatible with BL Touch
Asin: B09S9LL7XW
【✅Upgraded Miniusb Interface】The Pc Communication Usb Interface Is Upgraded From Mini Usb To Micro Usb B, Which Is More Adaptable..
【❤️Serious Service】We Will Provide A Long-Term Warranty Service Of Up To 12Months,Strict Testing For All Components Before Delivery. If You Encounter Any Problems When Printing, Please Feel Free To Contact Us, Please Give Us A Chance To Solve The Problem For You..
【✅Multiple Functioning】Support Bltouch, Rgb Lights,Filament Detection, Power-Off Resume, Automatic Shutdown, Etc .Compatible With Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro/Cr-10 3D Printers.
【✅Improved Cooling Effect】Upgraded Heat Sink Improves Heat Dissipation,Trengthen The Drive Heat Dissipation Capacity;Thermistor Inputs Are Protected From Short Circuit To Vin;Added A Third Pwm Controlled Cooling Fan Output,It Can Better Protect The Circuit Board And Prolong The Life Of The Motherboard..
Features
- Main control chip upgrade SKR MINI E3 V3.0 main control chip upgrade Adopts STMicroelectronics G0 series MCU STM32G0B1RET6,the instructions will be sent to the 3D printer faster and more accurately.
- Improved cooling effect Upgraded heat sink improves heat dissipation,trengthen the drive heat dissipation capacity;Thermistor inputs are protected from short circuit to Vin;Added a third PWM controlled cooling fan output,It can better protect the circuit board and prolong the life of the motherboard.
- Upgraded MiniUSB interface The PC communication USB interface is upgraded from Mini USB to Micro USB B, which is more adaptable.
- Multiple functioning Support BLtouch, RGB lights,filament detection, power-off resume, automatic shutdown, etc .Compatible with Creality Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/Ender 5 pro/CR-10 3D printers
- Serious service We will provide a long-term warranty service of up to 12months,Strict testing for all components before delivery. If you encounter any problems when printing, please feel free to contact us, please give us a chance to solve the problem for you.
- See more on Amazon...
Brand: Ickiya | Manufacturer: BIGTREETECH
Dimensions: 3.62 x 5.59 x 1.65 Inches
See On Amazon
Looking For Something Else?
Search