Best circuit tracers & analyzers - Buying Guide
Last Updated: 04/24/2024
Share on
Bestselling circuit tracers & analyzers on Amazon
- Underground Wire Tracer, VXSCAN F04 Underground Wire Locator Tone Generator Kit and Probe with Earph...
- Power Circuit Probe Tester 6V-24V DC Test Light Short Circuit Tester Component Activation Electrical...
- AWBLIN Power Circuit Probe Tester, LCD Digital Automotive Test Light with Voltage Display&Illuminati...
- TEMPO Station Master Pro Irrigation System Tester | Activate Solenoids, Chatter Solenoids, Send Tone...
- Power Circuit Probe Tester with Overload Protection and Component Activation, Polarity Identify Cont...
- Power Circuit Probe Kit, 12V 24V Automotive Circuit Tester Electrical System Diagnosis, AC DC Digita...
- Extech TG20 Wire Tracer and Tone Generator, Black
- Sodcay 1 PC Car Digital Display LED Circuit Test Pen, Circuit Detection 3V-70V Multi-Functional Indu...
- Automotive Circuit Tester, Power Circuit Probe Tester, AC DC Digital Voltage Tester 6V 30V Electrica...
- AUTOOL Circuit Probe Kit 6-24V Automotive Circuit Tester with Auto Electrical System Testing Functio...
#1
Underground Wire Tracer, VXSCAN F04 Underground Wire Locator Tone Generator Kit and Probe with Earphone Cable Tester for Locating Breakage Cables Irrigation Wires Pet Fence
Asin: B09W8TTQ3C | Model: VXSCAN F04 | PartNumber: VXSCAN F04 | Ean: 0889327054312 | UPC: 889327054312
How To Use- Install Batteries Then Hold The Power Button For At Least 3.Seconds To Turn On The Transmitter And Receiver Respectively; 2.Adjust The Transmitter’S Power And Get The Receiver Slowly Close To The Transmitter Until Can Hear And Judge The Sound In Search Of Cables; 3.The Red Line Of The Transmitter Clips The Cable To Be Detected, The Black Line Doesn’T Have To Be Connected; 4.Short-Circuit Judgment - If The Receiver Sounds By Detecting An Untested Cable, This Cable Is Short-Circuited.
Warm Tips 1 - If The Line Length Does Not Reach The Measurable Range And The Line Cannot Be Detected, Please Check/Operate The Following Steps First - 1. Check If The Battery Power Is Too Low. If The Battery Is Low, Replace It With A New One Please 2. Is The Transmit Power Adjusted To The Maximum? If Not, You Need To Adjust The Transmit Power To The Maximum, And Then Slowly Turn Down The Power To Locate The Line..
Warm Tips 2 - Did You Make Ground Stakes By Yourself Before Use? If Not, You Need To Make Ground Stakes Yourself, And The Black Clip On The Transmitter Needs To Be Connected To The Ground Stakes, Which Can Enhance The Signal If You Have Done All The Above Steps And Still Cannot Detect The Line, Please Feel Free To Contact Us..
Enhance Efficiency In Noisy Environments - Our Underground Wire Locator Buried Wire Locator Comes Equipped With A Pair Of 3.5Mm Headphones. By Minimizing External Noise Interference, You Can Concentrate On Detecting And Tracing Cables Without Distractions, Ensuring Optimal Efficiency And Accuracy. Simply Adjust The Signal Strength Knob To Control The Signal Strength, And Turn Down The Transmit Strength Or The Receiver Sensitivity Knob To Help Trace The Wire..
Enhance Visibility, Boost Efficiency - Say Goodbye To Struggling In Dim Environments With The Underground Wire Tracer And Buried Wire Locator. Its Led Lights Ensure Clear Visibility, Making Your Work Easier And More Efficient. Illuminate Your Way And Conquer Any Task, Any Time. If You Encounter Any Problems During Use, Please Feel Free To Contact Us We Will Reply To You Within 24 Hours..
Where You Can Use - The F04 Wire Locator Can Be Used To Detect Pet Fence Cables, Pipeline Cables, Underground Irrigation Cables, Cables In The Construction Area, Etc. Underground Cable Locator Only For Single-Strand Wire, Or Double-Strand Wire In Parallel, Not For Stranded Wire. Underground Wire Tracer Is Only Applicable To Wires And Cables, And Not Applicable To Sprinkler Valves!.
Warm Tips 3 - Is The Detection Range Too Large And Inaccurate? When Looking For The Cable To Be Tested, It Is Necessary To Adjust The Power Of The Transmitter And Receiver To The Maximum, To Find The Cable To Be Tested Conveniently. After Finding The Cable To Be Tested, It Is Necessary To Gradually Reduce The Power According To The Test Requirements To Narrow The Detection Range And Accurately Locate The Line..
Upgraded Version, Underground Wire Tracer - The F04 Underground Cable Locator Is Powered By A High-Performance 9V Electronic Technology Battery, Which Can Last For 3-4 Hours Under Normal Conditions. When The Battery Is In The Best Condition, The Detection Length Can Reach 1000 Feet And The Depth Is Within 3 Feet. As With Any Battery-Powered Device, The Detection Distance Of The F04 Underground Wire Locator May Vary Based On The Battery Level..
Features
- SAVE TIME AND MONEY - The VXSCAN F04 Underground Wire Tracer is your trusted companion when it comes to swiftly and precisely locating break-points and tracing underground and wall-through cables. Take control of cable detection and repairs with ease, right at your fingertips. Save time and money by handling cable maintenance independently.
- UPGRADED VERSION, UNDERGROUND WIRE TRACER - The F04 Underground Cable Locator is powered by a high-performance 9V electronic technology battery, which can last for 3-4 hours under normal conditions. When the battery is in the best condition, the detection length can reach 1000 feet and the depth is within 3 feet. As with any battery-powered device, the detection distance of the F04 Underground Wire Locator may vary based on the battery level.
- HOW TO USE- Install batteries then hold the power button for at least 3.seconds to turn on the transmitter and receiver respectively; 2.Adjust the transmitter s power and get the receiver slowly close to the transmitter until can hear and judge the sound in search of cables; 3.The red line of the transmitter clips the cable to be detected, the black line doesn t have to be connected; 4.Short-circuit judgment - if the receiver sounds by detecting an untested cable, this cable is short-circuited
- WHERE YOU CAN USE - The F04 wire locator can be used to detect Pet Fence cables, Pipeline cables, Underground Irrigation cables, cables in the construction area, etc. Underground Cable Locator only for single-strand wire, or double-strand wire in parallel, not for stranded wire. Underground wire tracer is only applicable to wires and cables, and not applicable to sprinkler valves!
- ENHANCE EFFICIENCY IN NOISY ENVIRONMENTS - Our Underground Wire Locator Buried Wire Locator comes equipped with a pair of 3.5mm headphones. By minimizing external noise interference, you can concentrate on detecting and tracing cables without distractions, ensuring optimal efficiency and accuracy. Simply adjust the SIGNAL STRENGTH knob to control the signal strength, and Turn DOWN the TRANSMIT strength or the RECEIVER sensitivity knob to help trace the wire.
- ENHANCE VISIBILITY, BOOST EFFICIENCY - Say goodbye to struggling in dim environments with the Underground Wire Tracer and Buried Wire Locator. Its LED lights ensure clear visibility, making your work easier and more efficient. Illuminate your way and conquer any task, any time. If you encounter any problems during use, please feel free to contact us we will reply to you within 24 hours.
- WARM TIPS 1 - If the line length does not reach the measurable range and the line cannot be detected, please check/operate the following steps first - 1. Check if the battery power is too low. If the battery is low, replace it with a new one please 2. Is the transmit power adjusted to the maximum? If not, you need to adjust the transmit power to the maximum, and then slowly turn down the power to locate the line.
- WARM TIPS 2 - Did you make ground stakes by yourself before use? If not, you need to make ground stakes yourself, and the black clip on the transmitter needs to be connected to the ground stakes, which can enhance the signal If you have done all the above steps and still cannot detect the line, please feel free to contact us.
- WARM TIPS 3 - Is the detection range too large and inaccurate? When looking for the cable to be tested, it is necessary to adjust the power of the transmitter and receiver to the maximum, to find the cable to be tested conveniently. After finding the cable to be tested, it is necessary to gradually reduce the power according to the test requirements to narrow the detection range and accurately locate the line.
- See more on Amazon...
Brand: VXSCAN | Manufacturer: VXSCAN
Weight: 1.00 Pounds
See On Amazon #2
Power Circuit Probe Tester 6V-24V DC Test Light Short Circuit Tester Component Activation Electrical Tester Polarity Identify Continuity Tester with LED Light, Long Test Lead, Overload Protection
Asin: B094PZMBXY | Model: MMT211 | PartNumber: MMT211 | Ean: 0758358919849 | UPC: 758358919849
【Activate And Test Components In/Out Of Vehicle’S Electrical System&Poor Ground Contact Testing】Power Circuit Probe Tester Could Activate Components In And Out Of The Vehicle’S Electrical System, Test And Check The Components If Defective Or Not, Or If Rating Current Of Component Is Higher Than That Of The Circuit Tester. For Some Components, The Negative Terminal Is Required To Be Well Grounded To Cope With The Flow Of Large Currents, This Circuit Tester Is A Good Tool To Test Their Grounding..
【Easy Operation Circuit Tester】Unroll The Leads. Clamp The Red Clip Of The Power Circuit Probe Tester To The Positive Terminal Of The Vehicle's Battery. Clamp The Black Clip To The Negative Terminal Of The Vehicle's Battery. After A Simple Hook-Up Of The Circuit Tracer To The Vehicle's Battery, Automotive Technician Can Conduct A Positive Or Negative Battery Current To The Tip By Rocking The Power Switch Forward Or Backward..
【Quick Self-Test & Overload Protection】Before You Test A Circuit Or Component, The Test Light Can Perform A Quick Self-Test To Ensure Your Tool Is In Good Condition. Equipped With Overload Protection, When The Current Exceeds 7A, The Circuit Tester Will Disconnect The Current Automatically And Give You A Buzzer Prompt. You Can Test Poor Ground Contacts Directly. Note: This Electrical Tester Can Not Be Used For 110/220V Systems, It Is Only Used For Dc 6-24V Systems. Do Not Use On Ac Voltage..
【Automatic Reset Test Light】When The Circuit Breaker Trip Is Detected, The Power Circuit Probe Tester Will Sound A Prompt To Remind You That There Is A Short Circuit Problem. Then It Will Automatically Reset Within 3 To 5 Seconds(The Prompt Sound Will Automatically Turn Off), So You Can Retest Or Go To Test Other Places..
【13Ft Long Extension Cable&Led Light Prompt&Buzzer Warning&Highly Sensitive Probe&Clips With Strong Bite】The Cable Length Of The Circuit Tracer Is About 4M(13Ft) Which Allows You Access And Test Any Electrical System Easily. The Led Indicator And Buzzer Warning Can Help You Clear Problems At A Glance. Test Light Adopts Advanced High Sensitivity Probe, Which Provides You Quick And Accurate Detection. Its Clips With Strong Bite Force Which Not Easy To Fall Off, Providing You Better Experience..
【Polarity Identification & Continuity Testing & Jumper Lead Operation】This Power Circuit Probe Tester Can Help You Quickly Identify Positive And Negative Polarity Of Electric Cables And Plugs Of Vehicles. When The Probe Tip Contact To The Positive Electrode, The Red Light On. When The Probe Tip Contact To The Negative Electrode, The Green Light On. It Can Also Test For Continuity And Do The Jumper Lead Operation With The Assistance Of Its Auxiliary Ground Lead..
Features
- Short Circuit Following and Locating Test Light The circuit tester is suitable for diagnostic in all 6V to 24V DC vehicle electrical systems. It can check switches, relays and the on-off of diodes, fuses and circuits, which can help you reduce diagnostic time in automotive electrical systems. In most cases, short circuit or instant overload of component will lead to blown fuse or circuit breaker tripping.This probe tester can assist you tracing problem wires and locating breaking points.
- Polarity Identification & Continuity Testing & Jumper Lead Operation This power circuit probe tester can help you quickly identify positive and negative polarity of electric cables and plugs of vehicles. When the probe tip contact to the positive electrode, the RED light on. When the probe tip contact to the negative electrode, the GREEN light on. It can also test for continuity and do the jumper lead operation with the assistance of its auxiliary ground lead.
- Activate and Test Components In/Out of Vehicle s Electrical System&Poor Ground Contact Testing Power circuit probe tester could activate components in and out of the vehicle s electrical system, test and check the components if defective or not, or if rating current of component is higher than that of the circuit tester. For some components, the negative terminal is required to be well grounded to cope with the flow of large currents, this circuit tester is a good tool to test their grounding.
- 13FT Long Extension Cable&LED Light Prompt&Buzzer Warning&Highly Sensitive Probe&Clips with Strong Bite The cable length of the circuit tracer is about 4m(13ft) which allows you access and test any electrical system easily. The LED indicator and buzzer warning can help you clear problems at a glance. Test light adopts advanced high sensitivity probe, which provides you quick and accurate detection. Its clips with strong bite force which not easy to fall off, providing you better experience.
- Quick Self-Test & Overload Protection Before you test a circuit or component, the test light can perform a quick self-test to ensure your tool is in good condition. Equipped with overload protection, when the current exceeds 7A, the circuit tester will disconnect the current automatically and give you a buzzer prompt. You can test poor ground contacts directly. Note: This electrical tester can not be used for 110/220V systems, it is only used for DC 6-24V systems. Do not use on AC voltage.
- Automatic Reset Test Light When the circuit breaker trip is detected, the power circuit probe tester will sound a prompt to remind you that there is a short circuit problem. Then it will automatically reset within 3 to 5 seconds(the prompt sound will automatically turn off), so you can retest or go to test other places.
- Easy Operation Circuit Tester Unroll the leads. Clamp the red clip of the power circuit probe tester to the positive terminal of the vehicle's battery. Clamp the black clip to the negative terminal of the vehicle's battery. After a simple hook-up of the circuit tracer to the vehicle's battery, automotive technician can conduct a positive or negative battery current to the tip by rocking the power switch forward or backward.
- See more on Amazon...
Brand: DUOYI | Manufacturer: DUOYI
Dimensions: 1.57 x 10.24 x 3.94 inches
See On Amazon #3
AWBLIN Power Circuit Probe Tester, LCD Digital Automotive Test Light with Voltage Display&Illumination, DC Voltage Tester, Electrical System Tool, Relay Fuse Continuity Current Test.
Asin: B0C2CD7BX6
Easy To Read: The Circuit Tester Combines An Lcd Digital Backlight Display With An Led Red/Green Indicator Light Design, Making It Easier To Read The Voltage And Current Values Of The Screen And Distinguish Between Positive And Negative Electrodes..
Overload Protection & Buzzer Alarm: In Voltage Mode, The Tester Will Display Overvoltage Warning When Voltage Exceeds 61Vdc. The Lcd Will Display “Ol”, Red Led Light On. In Current Mode, If The Current Is Too High, The Lcd Will Display “Ol”, Buzzer Alarm. When The Current Exceeds 8A, The Tester Will Automatically Disconnect To Protect The Circuit To Reduce Unnecessary Losses. The Disconnection Time Varies With The Load Current..
Extended Spring Wire & Anti-Lost Probe Cover: Compared With The Ordinary Wire, The Automotive Light Tester Comes With High Quality Spring Wire That Can Stretch Up To 196.85 Inches, Making The Maintenance And Diagnosis Work More Portable, Convenient And Fast. It Allows You To Test From The Front Of The Car To The Rear Without Constantly Searching For A Suitable Ground. In Addition, The Integrated Design Of The Anti-Loss Cover Ensures No Puncture Wounds, No Matter Where You Go Will Not Be Lost..
Illumination Function: The Test Light Probe Built-In Flashlight Is Bright Enough To Light Up Your Work Area. When The Two Alligator Clamps Respectively Clamp The Positive And Negative Ends Of The Battery, The Flashlight Immediately Lights Up, Which Is More Convenient For You To Test At Night Or In Dark Areas..
2 Working Modes: The Automotive Test Light Supports 2 Working Modes: Voltage Mode And Current Mode(Resolution: 0.1V/0.1A), Two Clip Supply Voltage: 5-36Vdc, Probe Test Voltage: 1-60Vdc, Probe Test Current: Dc 0-8A. The Electric Test Pen Usually Default Voltage Mode, Press The Small Black Round Button, You Can Easily Switch To The Current Mode. It Is Powered By Vehicle’S Battery, No Extra Battery Needed..
Features
- MULTIFUNCTIONAL CIRCUIT PROBE TESTER The power circuit probe tester has multiple functions, such as detection Circuit Polarity, Voltage, Connection, Break, Lighting, Ignition Plug, Sensor Measurement, Grounding Test, Continuity Test, Component Activation and other functions. No additional tools needed to help you reduce car diagnosis time.
- 2 WORKING MODES: The automotive test light supports 2 working modes: voltage mode and current mode(Resolution: 0.1V/0.1A), Two Clip Supply voltage: 5-36VDC, Probe test voltage: 1-60VDC, Probe test current: DC 0-8A. The electric test Pen usually default voltage mode, press the small black round button, you can easily switch to the current mode. It is powered by vehicle s battery, no extra battery needed.
- EASY TO READ: The circuit tester combines an LCD digital backlight display with an LED red/green indicator light design, making it easier to read the voltage and current values of the screen and distinguish between positive and negative electrodes.
- ILLUMINATION FUNCTION: the test light probe built-in flashlight is bright enough to light up your work area. When the two alligator clamps respectively clamp the positive and negative ends of the battery, the flashlight immediately lights up, which is more convenient for you to test at night or in dark areas.
- OVERLOAD PROTECTION & BUZZER ALARM: In voltage mode, the Tester will display overvoltage warning when voltage exceeds 61VDC. The LCD will display OL , red LED light on. In current mode, If the current is too high, the LCD will display OL , buzzer alarm. When the current exceeds 8A, the tester will automatically disconnect to protect the circuit to reduce unnecessary losses. The disconnection time varies with the load current.
- EXTENDED SPRING WIRE & ANTI-LOST PROBE COVER: Compared with the ordinary wire, the automotive light tester comes with high quality spring wire that can stretch up to 196.85 inches, making the maintenance and diagnosis work more portable, convenient and fast. It allows you to test from the front of the car to the rear without constantly searching for a suitable ground. In addition, the integrated design of the anti-loss cover ensures no puncture wounds, no matter where you go will not be lost.
- See more on Amazon...
Brand: AWBLIN | Manufacturer: AWBLIN
See On Amazon #4
TEMPO Station Master Pro Irrigation System Tester | Activate Solenoids, Chatter Solenoids, Send Tone, Locate Valve Boxes (Pro Grade Model) (24BK)
Asin: B084NXHWQP | Model: 24BK | PartNumber: 24BK | Ean: 0810025410148 | UPC: 810025410148
Easy To Use: The Device Has Easy-To-Understand Leds To Notify Technicians Of Sufficient Voltage Supply And Solenoid Condition. It Activates Any 24V Ac Solenoid And Sends A Strong Tracing Tone To Identify Wires..
Versatile: The Tester Is Not Dependent On The Controller For Valve Solenoid Testing, And It Can Safely Hold Open A Working Solenoid For Hours. It Also Tones Valve Wires For Identification And Chatters Underground Solenoids For Locating Valve Boxes By Ear. Get Your Model 24Bk Station Master Pro Today And Keep Your Irrigation Systems In Top Shape..
Durable Construction: The Model 24Bk Station Master Pro Is Built To Last With A Premium "Bed-Of-Nails" And Piercing Pin Bent Nose Clips For Use On Insulated Wires. No Cutting Or Stripping Is Needed, Making It Ideal For Outdoor Use In The Field..
Quickly Diagnose Faults: The Device Quickly Diagnoses Faults With Solenoid Activation And Wire Identification. The Solenoid Activation Mode Activates Valve Solenoids Easily, And The Chatter Mode Aids In Locating The Valve By Ear..
Features
- PORTABLE IRRIGATION SYSTEM TESTER: The Model 24BK Station Master Pro is a highly portable, battery-operated irrigation system tester, ideal for quick troubleshooting and diagnosing faults in irrigation systems.
- QUICKLY DIAGNOSE FAULTS: The device quickly diagnoses faults with solenoid activation and wire identification. The solenoid activation mode activates valve solenoids easily, and the chatter mode aids in locating the valve by ear.
- EASY TO USE: The device has easy-to-understand LEDs to notify technicians of sufficient voltage supply and solenoid condition. It activates any 24V AC solenoid and sends a strong tracing tone to identify wires.
- DURABLE CONSTRUCTION: The Model 24BK Station Master Pro is built to last with a premium bed-of-nails and piercing pin bent nose clips for use on insulated wires. No cutting or stripping is needed, making it ideal for outdoor use in the field.
- VERSATILE: The tester is not dependent on the controller for valve solenoid testing, and it can safely hold open a working solenoid for hours. It also tones valve wires for identification and chatters underground solenoids for locating valve boxes by ear. Get your Model 24BK Station Master Pro today and keep your irrigation systems in top shape.
- See more on Amazon...
Brand: TEMPO | Manufacturer: Tempo Communications
Weight: 0.97 pounds
See On Amazon #5
Power Circuit Probe Tester with Overload Protection and Component Activation, Polarity Identify Continuity Short Circuit Tester 6-24V with LED Test Light, Buzzer Warning,13FT Long Extension Cable
Asin: B09G97R6DW | Model: Red Tester-02 | PartNumber: Red Tester-02 | Ean: 0758358921248 | UPC: 758358921248
[ Led Indicator& Buzzer Dual Warning ]: In Order To Let You Understand More Intuitively And Clearly Understand The Grounding Of The Components, The Power Circuit Probe Tester Comes With An Led Indicator And A Buzzer, The Test Light Can Perform A Quick Self-Test To Ensure Your Tool Is In Good Condition. When The Current Exceeds 7A, The Circuit Tester Automotive Will Disconnect The Current Automatically And Give You A Buzzer Prompt, Reminding You Whether The Tested Component Is Faulty..
[ Packing Include ]: 1 X Power Scan, 1 X Probe Tip, 1 X Battery Hookup Clips, 1 X User Manual, 2 X Clips. The Cable Length Of The Circuit Tester Is About 4M(13Ft) Which Allows You Access And Test Any Electrical System Easily. Note: This Circuit Tester Can Not Be Used For 110/220V Systems, It Is Only Used For Dc 6-24V Systems. Do Not Use On Ac Voltage..
[ Note ]: Before Performing The Test, Please Make Sure That Your Tester Is Properly Connected. Connect The Red Clip To The Positive Terminal Of The Car Battery. Then Connect The Black Clip To The Negative Terminal Of The Car Battery. During The Continuity Test, The Auxiliary Ground Wire Needs To Be Connected To One Side Of The Wire Under Test. When Testing Components In/Out Of The Vehicle's Electrical System, Connect The Auxiliary Ground Wire To The Negative Pole Of The Component Under Test..
[ How To Use ]: Clip The Red Clip To The Positive Electrode Of The Car Battery And The Black Clip To The Negative Electrode Of The Car Battery, Press Button To “Positive”Side With Led Lighting Red, Connect The Tip To Positive Terminal Of Tested Component To Active The Component. If Led Turns To Green With Buzzer, Stop Testing And Check The Component If Defective Or Not, Or Rating Current Of Component Is Higher Than That Of This Tester..
[ Quickly Tracking And Locating ]: The Automotive Circuit Tester Is Mainly Used To Test The On-Off Condition Of The Automobile Electrical System Under The 6-24V Dc Voltage.In Most Cases, A Short Circuit Or Momentary Overload Of A Component Will Cause A Fuse Or Circuit Breaker To Blow. When The Fuse Is Blown Due To A Short Circuit, Using This Circuit Tester Can Help You Quickly And Accurately Find The Faulty Wire And Its Fault Point..
Features
- [ Polarity Testing & Continuity Testing ]: The power circuit probe tester can be used to test uncertain contact polarity in vehicles. When the it touches the positive pole, the indicator light will turn on red, and when it touches the negative pole, it will turn on green. In addition to polarity testing, the power short circuit finder can also perform continuity testing, it is mainly to test whether the circuit has continuity and whether it is short-circuited.
- [ Quickly Tracking and Locating ]: The automotive circuit tester is mainly used to test the on-off condition of the automobile electrical system under the 6-24V DC voltage.In most cases, a short circuit or momentary overload of a component will cause a fuse or circuit breaker to blow. When the fuse is blown due to a short circuit, using this circuit tester can help you quickly and accurately find the faulty wire and its fault point.
- [ LED Indicator& Buzzer Dual Warning ]: In order to let you understand more intuitively and clearly understand the grounding of the components, the power circuit probe tester comes with an LED indicator and a buzzer, the test light can perform a quick self-test to ensure your tool is in good condition. When the current exceeds 7A, the circuit tester automotive will disconnect the current automatically and give you a buzzer prompt, reminding you whether the tested component is faulty.
- [ How to Use ]: Clip the red clip to the positive electrode of the car battery and the black clip to the negative electrode of the car battery, press button to Positive side with LED lighting RED, connect the tip to positive terminal of tested component to active the component. If LED turns to GREEN with buzzer, stop testing and check the component if defective or not, or rating current of component is higher than that of this tester.
- [ Packing Include ]: 1 X Power Scan, 1 x Probe Tip, 1 x Battery Hookup Clips, 1 x User Manual, 2 x clips. The cable length of the circuit tester is about 4m(13ft) which allows you access and test any electrical system easily. Note: This circuit tester can not be used for 110/220V systems, it is only used for DC 6-24V systems. Do not use on AC voltage.
- [ NOTE ]: Before performing the test, please make sure that your tester is properly connected. Connect the red clip to the positive terminal of the car battery. Then connect the black clip to the negative terminal of the car battery. During the continuity test, the auxiliary ground wire needs to be connected to one side of the wire under test. When testing components in/out of the vehicle's electrical system, connect the auxiliary ground wire to the negative pole of the component under test.
- See more on Amazon...
Brand: OUFKAR | Manufacturer: OUFKAR
Dimensions: 1.57 x 10.24 x 3.94 inches
See On Amazon #6
Power Circuit Probe Kit, 12V 24V Automotive Circuit Tester Electrical System Diagnosis, AC DC Digital Voltage Test Short Finder, Multimeter Relay/Diode Resistance Tool Component Test, 20ft+20ft Cable
Asin: B0CW37YDK7 | Ean: 0889327073061 | UPC: 889327073061
【Flashlight】Built-In Flashlight Enables You To Work In The Dark. Even In A Dark Environment Where You Can't See Clearly, Fuse Tester Automotive Kit Can Give You A Good View..
【Long Cable】The Powerscan Circuit Probe Tester Contain 20Ft (Extendable) Cable Provides Excellent Accessibility To Test Along The Vehicle..
【Protect Your Vehicle】The Power Circuit Probe Kit Can Immediately Check For Bad Ground Contacts And Quickly Track Down Shorts Without Losing Fuses. Also, The Unit Provides Higher Safety For The User, As It Is Protected By A Circuit Breaker, Which Is A Safe Measure To Protect The Unit And Your Components From Overload..
6 Working Mode & All In One: Six Working Modes Make Circuit Detection More Simple -- Waveform, Resistance, Diode, Current Detection. With Such A Versatile Tool, The Technician Can Trace And Identify The Problem Circuit And Rule Out Good Circuits, Speeding Up The Diagnostic Process And Revealing The True Cause Of The Electrical Problem Much Easier..
Features
- 2024 New Upgraded Power Circuit Probe Kit: VXSCAN PT1000 Power Scan Kit is the best circuit tester for reducing diagnostic time in all 8 to 50 volt vehicle electrical systems. The 160x128 TFT display and four precise diagnostic modes make circuit detection more simple: DC Voltage, AC Voltage, Resistance and Diode. It will test voltage&polarity, and continuity easliy, also fault diagnosis, ground testing without fuses, check bad grounds, activating components, sensing MIN /MAX voltage, etc.
- 6 WORKING MODE & All in One: Six working modes make circuit detection more simple -- Waveform, Resistance, Diode, Current Detection. With such a versatile tool, the technician can trace and identify the problem circuit and rule out good circuits, speeding up the diagnostic process and revealing the true cause of the electrical problem much easier.
- FLASHLIGHT Built-in Flashlight enables you to work in the dark. Even in a dark environment where you can't see clearly, fuse tester automotive kit can give you a good view.
- PROTECT YOUR VEHICLE The power circuit probe kit can immediately check for bad ground contacts and quickly track down shorts without losing fuses. Also, the unit provides higher safety for the user, as it is protected by a circuit breaker, which is a safe measure to protect the unit and your components from overload.
- LONG CABLE The powerscan circuit probe tester contain 20ft (extendable) cable provides excellent accessibility to test along the vehicle.
- See more on Amazon...
Brand: VXSCAN | Manufacturer: VXSCAN
Dimensions: 1.18 x 7.09 x 1.57 inches
See On Amazon #7
Extech TG20 Wire Tracer and Tone Generator, Black
Asin: B00APD16D2 | Model: TG20 | PartNumber: TG20 | Ean: 0785533712544, 0793950481202 | UPC: 785533712544, 793950481202
Adjustable Sensitivity Control Improves Wire Identification And Eliminates False Detection.
Easily Trace Wires From Source To Termination.
20 Degree C To 550 Degree C ( 4 Degree F To 1022 Degree F) In Two Ranges.
Features
- Identify wire pairs, check continuity & test telephone line polarity
- 20 degree C to 550 degree C ( 4 degree f to 1022 degree f) in two ranges
- Adjustable sensitivity control improves wire identification and eliminates false detection
- Easily trace wires from source to termination
- See more on Amazon...
Brand: Extech | Manufacturer: FLIR Systems
Dimensions: 1.30 x 8.70 x 2.00 inches | Weight: 0.22 Pounds
See On Amazon #8
Sodcay 1 PC Car Digital Display LED Circuit Test Pen, Circuit Detection 3V-70V Multi-Functional Induction Long Probe, Voltage Continuity Test for Wires Fuse Socket, Universal for Most Cars (Black)
Asin: B0CHJHW2XD | Model: SOXSB701BL-3V-70V-1 | PartNumber: SOXSB701BL-3V-70V-1
🚘 Led Digital Display: This Detection Pen Is Designed With An Led Digital Voltage Display, Which Allows You To Clearly See The Detection Value. In The Bidirectional Current And Voltage Test Mode, You Can Ground The Alligator Clip, Clamp The Negative Pole With The Clip, Test The Positive Pole With The Tip Of The Pen, And Turn On The Green Light. Hold The Positive Pole With The Clip, And Measure The Negative Pole With The Tip Of The Pen, And A Red Light Will Appear..
🚘 Product Parameters: You Will Receive 1 X Digital Display Test Pen With A Measuring Range Of 3V-70V, A Pen Body Length Of 4 Inches, A Probe Length Of 3 Inches, And Test Leads Are 3.9 Feet Long, Which Is Sufficient For Your Use. The Long Probe With Alligator Clip Ensures You Can Reach Tight Places With More Accuracy And Sensitivity..
🚘 Wide Application: It Can Be Used For Automotive Fuse Testing, Generator Testing, Frequency Voltage Testing, And Circuit Positive And Negative Pole Discrimination. Suitable For Circuit Testing Of Most Cars. In The Maintenance Of Automotive Circuit Systems, Efficient Troubleshooting And Safe Problem Solving Can Be Achieved..
🚘 Ensure Safe Driving: The Automobile Circuit Test Pen Is Mainly Used To Detect Parameters Such As Voltage, Current, And Resistance In Automobile Circuits. This Device Can Help Detect And Eliminate Faults In The Automobile Circuit System, Ensure You Can Safely Conduct Circuit Testing, And Improve The Reliability And Safety Of The Car As A Whole..
Features
- Premium Quality: This circuit detection pen adopts ABS high-hardness shell, durable, good insulation performance, better clamping body and screws. The thickened test wire is used, which has good flexibility and can be bent. The wire mouth is protected by a spring, which will not cause danger due to the disconnection of the wire skin over time.
- Ensure Safe Driving: The automobile circuit test pen is mainly used to detect parameters such as voltage, current, and resistance in automobile circuits. This device can help detect and eliminate faults in the automobile circuit system, ensure you can safely conduct circuit testing, and improve the reliability and safety of the car as a whole.
- LED Digital Display: This detection pen is designed with an LED digital voltage display, which allows you to clearly see the detection value. In the bidirectional current and voltage test mode, you can ground the alligator clip, clamp the negative pole with the clip, test the positive pole with the tip of the pen, and turn on the green light. Hold the positive pole with the clip, and measure the negative pole with the tip of the pen, and a red light will appear.
- Wide Application: It can be used for automotive fuse testing, generator testing, frequency voltage testing, and circuit positive and negative pole discrimination. Suitable for circuit testing of most cars. In the maintenance of automotive circuit systems, efficient troubleshooting and safe problem solving can be achieved.
- Product Parameters: You will receive 1 x digital display test pen with a measuring range of 3V-70V, a pen body length of 4 inches, a probe length of 3 inches, and test leads are 3.9 feet long, which is sufficient for your use. The long probe with alligator clip ensures you can reach tight places with more accuracy and sensitivity.
- See more on Amazon...
Brand: Sodcay | Manufacturer: Sodcay
Warranty: Manufacturer warranty for 30 days from date of purchase
See On Amazon #9
Automotive Circuit Tester, Power Circuit Probe Tester, AC DC Digital Voltage Tester 6V 30V Electrical System Test Tool Diode Resistance Check for Trailer Trucks with 4.9ft Cable and LED Light
Asin: B09YR8TLKB | Model: BT250 | PartNumber: BT250
【Wide Application】 Power Tester Can Support 6-30V Cars, Boats, Trailers, Atv, Motor Homes And Many Other Vehicles. With The Ability To Power Components Such As Radiator Fans, Starter Motors, Relays, Window Regulators, Windshield Wipers, Etc. The Circuit Tester Can Be Used As Electrical Tester, Breaker Finder, Power Tester, Wire Tester, Car Fuse Tester, Continuity Tester, Short Finder, Etc..
【7 Languages & Color Display】 The Circuit Tester Supports 7 Languages: English, German, Spanish, French, Italian, Russian, Portuguese. The Power Circuit Probe Tester Features A High-Definition Tft Color Display With High Resolution, Which Can View Data Clearly And Comfortably..
【Three Years Warranty】For Any Quality Problems. If Bt250 Has Any Defect, We Will Provide New Replacement Or Solutions For Our Customers Until Satisfaction Without Delay, And Provides Lifetime Technical Support. For Any Needs, You Are Warmly Welcomed To Contact Us And We Will Get Back To You Asap Within 24 Hours..
【Easy To Use】 The Power Circuit Probe Kit Tests Components Inside And Outside The Vehicle, Checks Good And Bad Grounds, Tests Continuity And Diagnoses Circuit Faults. The Built-In Led Head Lights Allow You To Work In The Dark Area. It Beeps To Indicate The Result While Testing. Supplied With A 4.9Ft Extension Cord For Excellent Accessibility, Powered By A Car Battery Or Cigarette Lighter..
【Quick Self Test & Relay Test & Circuit Breaker Protection】The Circuit Tester Has Quick Self Test Function, Which Can Ensure The Tester Is In Good Condition Before Use. The Probe Tester Can Quickly Detect Whether The Relay Is Normal. The Tool Has A Built-In 10 Amp Circuit Breaker, And It Automatically Trips When The Current Exceeds 16A, Protecting The Equipment And Extending Its Life..
Features
- 4 Adjustable Modes probe tester AC detects the maximum and minimum voltage, supply frequency and duty cycle of the circuit under test; DC detects the voltage value of the circuit under test; In addition,the circuit tester can also detects the resistance between the circuit probe under test and the auxiliary ground; Diode Test can quickly test the operation of the diode assembly and determines if it is conducting.
- Quick Self Test & Relay Test & Circuit Breaker Protection The circuit tester has quick self test function, which can ensure the tester is in good condition before use. The probe tester can quickly detect whether the relay is normal. The tool has a built-in 10 amp circuit breaker, and it automatically trips when the current exceeds 16A, protecting the equipment and extending its life.
- Wide Application Power tester can support 6-30V cars, boats, trailers, ATV, motor homes and many other vehicles. With the ability to power components such as radiator fans, starter motors, relays, window regulators, windshield wipers, etc. The circuit tester can be used as electrical tester, breaker finder, power tester, wire tester, car fuse tester, continuity tester, short finder, etc.
- Easy to Use The Power Circuit Probe Kit tests components inside and outside the vehicle, checks good and bad grounds, tests continuity and diagnoses circuit faults. The built-in LED head lights allow you to work in the dark area. It beeps to indicate the result while testing. Supplied with a 4.9ft extension cord for excellent accessibility, powered by a car battery or cigarette lighter.
- 7 Languages & Color Display The circuit tester supports 7 languages: English, German, Spanish, French, Italian, Russian, Portuguese. The power circuit probe tester features a high-definition TFT color display with high resolution, which can view data clearly and comfortably.
- Three Years Warranty For any quality problems. If BT250 has any defect, we will provide new replacement or solutions for our customers until satisfaction without delay, and provides lifetime technical support. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
- See more on Amazon...
Brand: Cartoobe | Manufacturer: Cartoobe
See On Amazon #10
AUTOOL Circuit Probe Kit 6-24V Automotive Circuit Tester with Auto Electrical System Testing Functions (Digital Voltage Tester/Multimeter/Short Finder/Battery Tester/Power or Ground Supply)
Asin: B083J8L36S | Ean: 0795853416831 | UPC: 795853416831
【Easy To Use】The Circuit Probe Can Be Used To Test And Activate Components In Or Out Of The Vehicle Electrical System. Press Button To “Positive”Side With Led Lighting Red. Conact The Probe Tip To Positive Terminal Of Tested Component To Active The Component. If Led Turns To Green With Buzzer, Stop Testing And Check The Component If Defective Or Not, Or Rating Current Of Component Is Higher Than That Of This Tester..
【High Quality】The Circuit Probe Is Equipped With Overload Power-Off Protection. If The Current Or Load Is Too Large During The Power Distribution Process Or When The Current Exceeds 7A, It Will Automatically Disconnect To Protect The Battery And Give A Buzzer Warning. With Its Short-Circuit Protection, You Can Test For Bad Ground Contacts Instantly. The Insulation Material Used In This Electrical Tester Has Passed The Ccc National Safety Compulsory Certification, Which Is Safe And Reliable.
【Three Years Warranty And Lifelong Maintenance】For The Damage Caused By Non-Human Factors, Autool Promises To Resend The Parts For Free Within 3 Years. For Any Demand, We Warmly Welcome You To Contact Us, And We Will Reply You As Soon As Possible Within 24 Hours..
【Widely Applicable】The Car Circuit Tester Is Suitable For The Diagnosis Of All 6V To 24V Automotive Electrical Systems And Can Work Well On Cars, Trucks, Boats, Trailers, Motorcycles, And Airplanes. The Portable And Ergonomic Design Of The Automotive Circuit Probe Is Convenient For You To Use In Narrow Areas; The 4-Meter Extension Cord Is Helpful For Mobile Maintenance Work; The Clip With Strong Bite Force Is Not Easy To Fall Off, Providing You With A Better Experience..
【Multi Functional】Automotive Electric System Is Test For Continuity. Test For Polarity Of A Voltage. Check Switches, Relays And The On-Off Of Diodes, Fuses And Circuits . Test For Polarity Of Electric Cables And Plugs. Track And Locate Short Circuits. Test For Bad Ground Contacts.Do Not Use On Ac Voltage..
Features
- Why Need It The circuit breaker finder is mainly used to test the on-off condition of the automobile electrical system under the 6-24v DC voltage. When the fuse is blown due to a short circuit, using this circuit tester can help you quickly and accurately find the faulty wire and its fault point.
- Multi Functional Automotive electric system is test for continuity. Test for polarity of a voltage. Check switches, relays and the on-off of diodes, fuses and circuits . Test for polarity of electric cables and plugs. Track and locate short circuits. Test for bad ground contacts.Do not use on AC voltage.
- Easy To Use The circuit probe can be used to test and activate components in or out of the vehicle electrical system. Press button to Positive side with LED lighting RED. Conact the probe tip to positive terminal of tested component to active the component. If LED turns to GREEN with buzzer, stop testing and check the component if defective or not, or rating current of component is higher than that of this tester.
- Widely Applicable The car circuit tester is suitable for the diagnosis of all 6V to 24V automotive electrical systems and can work well on cars, trucks, boats, trailers, motorcycles, and airplanes. The portable and ergonomic design of the automotive circuit probe is convenient for you to use in narrow areas; the 4-meter extension cord is helpful for mobile maintenance work; the clip with strong bite force is not easy to fall off, providing you with a better experience.
- High Quality The circuit probe is equipped with overload power-off protection. If the current or load is too large during the power distribution process or When the current exceeds 7A, it will automatically disconnect to protect the battery and give a buzzer warning. With its short-circuit protection, you can test for bad ground contacts instantly. The insulation material used in this electrical tester has passed the CCC national safety compulsory certification, which is safe and reliable
- Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
Dimensions: 3.15 x 9.06 x 3.54 inches | Weight: 0.44 Pounds
Warranty: 3 year warranty
See On Amazon #11
Fluke 2052 Advanced Wire Tracer Kit with Hard Carrying Case, CAT IV 600 V Safety Rated
Asin: B0C4R997L7 | Model: 5353853 | PartNumber: 5353853 | Ean: 0195112044568 | UPC: 195112044568
Cat Iv 600 V Safety Rated.
Includes The I400 Ac Current Clamp Accessory For Inducing A Tracing Signal On The Cable When There Is No Access To Bare Conductors.
Find Breaks Or Opens And Shorts, And Identify Breaks And Fuses Easily.
Features
- Locate energized and de-energized wires quickly and accurately in walls, ceilings, and floors
- Find breaks or opens and shorts, and identify breaks and fuses easily
- CAT IV 600 V safety rated
- Includes the i400 AC Current Clamp accessory for inducing a tracing signal on the cable when there is no access to bare conductors
- See more on Amazon...
Brand: Fluke | Manufacturer: Fluke
Dimensions: 5.50 x 16.70 x 13.00 inches | Weight: 4.41 pounds
See On Amazon #12
Fluke 2062 Advanced Pro Wire Tracer Kit with Hard Carrying Case, CAT IV 600 V Safety Rated
Asin: B0C4S1224J | Model: 5353866 | PartNumber: 5353866 | Ean: 0195112044575 | UPC: 195112044575
Find Breaks Or Opens And Shorts, And Identify Breaks And Fuses Easily.
Cat Iv 600 V Safety Rated.
Patented Smart Sensor Technology Locates And Displays Energized Wires On Color Display.
Features
- Locate energized and de-energized wires quickly and accurately in walls, ceilings, and floors
- Patented Smart Sensor technology locates and displays energized wires on color display
- Find breaks or opens and shorts, and identify breaks and fuses easily
- CAT IV 600 V safety rated
- See more on Amazon...
Brand: Fluke | Manufacturer: Fluke
Dimensions: 8.90 x 16.50 x 14.60 inches
See On Amazon #13
VEVOR Underground Cable Locator, 8 FT Max. Detection Depth, 12 to 600V (NVC) Wire Tracer Break Detector Finder, 6561 FT Max.Detection Length for Electrical Circuits Pipelines Dog Fence Buried Cables
Asin: B0CW9NGLDM | Model: TS552 | PartNumber: TS552 | Ean: 0197988402657 | UPC: 197988402657
Crystal Clear Display: Both The Transmitter And Receiver Are Equipped With A High-Definition Lcd Screen, Prominently Displaying Preset Transmission Power, Transmission Codes, Battery Levels, And Other Vital Data. The Backlit Feature Ensures Effortless Readability In Any Lighting Conditions, Providing Clear Visibility Of Your Equipment's Status At A Glance..
Illuminate Your Way: Our Wire Break Locator Is Equipped With A Powerful Led Flashlight Function, Providing Users With Extra Convenience In Low-Light Conditions. No Longer Limited By The Environment, You Can Carry Out Cable Locating Anytime, Anywhere. Shine A Light On Your Cable-Locating Journey!.
Multi-Mode Alerts: Our Wire Break Locator Utilizes Dual Alerts Through Sound And Lcd Screen. As You Approach The Target, The Sound Gradually Diminishes, Ensuring You Pinpoint The Cable Break With Precision And Convenience. The Transmitter And Receiver Adopt A Detachable Rechargeable Battery, Which Can Work Continuously For About 4 Hours When Fully Charged. Enjoy Extended Usage Without Worrying About Battery Life..
Exceptional Performance: Our Underground Cable Locator Supports Non-Contact Voltage (Ncv) Measurement, Allowing For Quick And Secure Electrical Inspections. You Can Measure The Strength Of The Electromagnetic Field Without Making Contact With Any Wires. This Underground Wire Locator Boasts An 8.5 Ft Max. Detection Depth(Double-Pole Application) And A 6561 Ft Max. Detection Length. Say Goodbye To Limitations In Depth Or Distance As You Effortlessly Locate Cable Break Points..
Features
- Versatile Applicability: Our underground cable locator is your go-to tool for measuring 12V to 600V linear AC and DC voltage cables. It finds extensive use in various fields, including communication cable installation, electrical cable construction, building and pipeline construction, telecommunications cables, power circuits, and electrical line maintenance. It's an indispensable tool for maintenance professionals.
- Exceptional Performance: Our underground cable locator supports non-contact voltage (NCV) measurement, allowing for quick and secure electrical inspections. You can measure the strength of the electromagnetic field without making contact with any wires. This underground wire locator boasts an 8.5 ft Max. Detection depth(double-pole application) and a 6561 ft Max. Detection length. Say goodbye to limitations in depth or distance as you effortlessly locate cable break points.
- Crystal Clear Display: Both the transmitter and receiver are equipped with a high-definition LCD screen, prominently displaying preset transmission power, transmission codes, battery levels, and other vital data. The backlit feature ensures effortless readability in any lighting conditions, providing clear visibility of your equipment's status at a glance.
- Multi-Mode Alerts: Our wire break locator utilizes dual alerts through sound and LCD screen. As you approach the target, the sound gradually diminishes, ensuring you pinpoint the cable break with precision and convenience. The transmitter and receiver adopt a detachable rechargeable battery, which can work continuously for about 4 hours when fully charged. Enjoy extended usage without worrying about battery life.
- Illuminate Your Way: Our wire break locator is equipped with a powerful LED flashlight function, providing users with extra convenience in low-light conditions. No longer limited by the environment, you can carry out cable locating anytime, anywhere. Shine a light on your cable-locating journey!
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 1.97 x 6.69 x 8.27 inches
See On Amazon #14
Amprobe AT-6010/KIT Advance Wire Tracer Kit,Black
Asin: B083BNT8BX | Model: AT-6010/KIT | PartNumber: AT-6010/KIT | Ean: 0095969915014 | UPC: 095969915014
Rated Cat Iii 600 V For Work Directly On An Energized Circuits Without Taking Equipment Offline.
Tested In Fluke Approved Labs.
Large Lcd Receiver Screen With Two Digit Readout, Bar Graph And Sound To Easily Determine Wire Location.
Trace And Test Wiring On Electrical Installations; Troubleshoot Electrical Connections, Identify Blown Fuses, Check Motors And Transformers.
Features
- Convenient Electric Installation Kit: AT-6010 Advanced Wire Tracer and AM-530 Digital TRMS Multimeter
- Trace and test wiring on electrical installations; troubleshoot electrical connections, identify blown fuses, check motors and transformers
- Rated CAT III 600 V for work directly on an Energized circuits without taking equipment offline
- Large LCD Receiver screen with two digit readout, bar graph and sound to easily determine wire location
- Tested in Fluke approved labs
- See more on Amazon...
Brand: Amprobe | Manufacturer: Amprobe
Weight: 0.00 pounds
See On Amazon #15
BOAK Upgrade Extra-Function Test Light,3-75V DC Automotive Test Light with Voltage & Current Mode,Bidirectional Electrical Fuse Light Tester,Car Truck Voltage Light Tester with Voltmeter&Buzzer Alarm
Asin: B0CRZ27246
✔️4 Working Modes: This Automotive Test Light Supports 4 Working Modes: Voltage Mode / Current Mode(Resolution: 0.1V/0.1A) / Resistance Mode(0-300K) / Frequency Mode(1-20K Hz),Two Clip Supply Voltage: 5-60Vdc,Probe Test Voltage: 1-75Vdc, Probe Test Current: Dc 0-10A. The Electric Test Pen Usually Default Voltage Mode, Press The Small Black Button,You Can Easily Switch To The Current Mode. It Is Powered By Vehicle’S Battery, No Extra Battery Needed.
📺Easy To Read: The Circuit Tester Combines An Lcd Digital Backlight Display With An Led Red/Green Indicator Light Design, Making It Easier To Read The Voltage And Current Values Of The Screen And Distinguish Between Positive And Negative Electrodes..
🔦Illumination Function: The Test Light Probe Built-In Flashlight Is Bright Enough To Light Up Your Work Area. When The Two Alligator Clamps Respectively Clamp The Positive And Negative Ends Of The Battery, The Flashlight Immediately Lights Up, Which Is More Convenient For You To Test At Night Or In Dark Areas..
⚠️Overload Protection & Buzzer Alarm: In Voltage Mode, The Tester Will Display Overvoltage Warning When Voltage Exceeds 75Vdc. The Lcd Will Display “Ol”, Red Led Light On. In Current Mode, If The Current Is Too High, The Lcd Will Display “Ol”, Buzzer Alarm. When The Current Exceeds 10A,The Tester Will Automatically Disconnect To Protect The Circuit To Reduce Unnecessary Losses. The Disconnection Time Varies With The Load Current..
Features
- MULTIFUNCTIONAL CIRCUIT TESTER This Test Light has Multiple Functions,Such as Detection Circuit Polarity, Voltage, Connection, Break, Lighting, Ignition Plug, Sensor Measurement, Grounding Test, Continuity Test, Component Activation and Other Functions. No Additional Tools Needed to Help you Reduce Car Diagnosis Time.
- OVERLOAD PROTECTION & BUZZER ALARM: In Voltage Mode, The Tester will Display Overvoltage Warning When Voltage Exceeds 75VDC. The LCD will Display OL , Red LED Light on. In Current Mode, If the Current is too High, The LCD will Display OL , Buzzer alarm. When the Current Exceeds 10A,The Tester will Automatically Disconnect to Protect the Circuit to Reduce Unnecessary Losses. The Disconnection Time Varies with the Load Current.
- 4 WORKING MODES: This Automotive Test Light Supports 4 Working Modes: Voltage Mode / Current Mode(Resolution: 0.1V/0.1A) / Resistance Mode(0-300K) / Frequency Mode(1-20K HZ),Two Clip Supply Voltage: 5-60VDC,Probe Test Voltage: 1-75VDC, Probe Test Current: DC 0-10A. The Electric Test Pen Usually Default Voltage Mode, Press the Small Black button,You Can Easily Switch to the Current Mode. It is Powered by Vehicle s Battery, No Extra Battery Needed
- ILLUMINATION FUNCTION: The Test Light Probe Built-in Flashlight is Bright Enough to Light up Your Work Area. When the Two Alligator Clamps Respectively Clamp the Positive and Negative Ends of The Battery, The Flashlight Immediately Lights up, Which is More Convenient for You to Test at Night or in Dark Areas.
- EASY TO READ: The Circuit Tester Combines an LCD Digital Backlight Display with an LED Red/Green Indicator Light Design, Making it Easier to Read the Voltage and Current Values of the Screen and Distinguish Between Positive and Negative Electrodes.
- See more on Amazon...
Brand: BOAK | Manufacturer: Yixuan
Dimensions: 1.40 x 10.00 x 1.40 inches | Weight: 0.66 Pounds
See On Amazon #16
Amprobe AT-8030 Advanced Industrial Wire Tracer Kit
Asin: B0891ZVKHF | Model: AT-8030 | PartNumber: AT-8030 | Ean: 0095969910743 | UPC: 095969910743
Features Three Power Modes: “High” Power Mode For Normal Circuits, “Low” Power Mode For Precision Tracing In Difficult Areas And "Clamp" Power Mode Provides A Boosted Induction Signal Via The Optional Signal Clamp.
Includes A Signal Clamp (Ct-400) Clamp-On Attachment For Inducing A Signal In Wires Where You Don’T Have Access To Bare Conductors.
Offers Two Output Frequency Modes For Optimal Tracing- 6 Khz For Energized Circuits- 33 Khz For De-Energized Circuits.
Features
- Traces AC/DC circuits from 0 - 600 V. The transmitter and receiver are CAT IV 600 V safety rated for electrical circuits in industrial environments
- Offers two output frequency modes for optimal tracing- 6 kHz for energized circuits- 33 kHz for de-energized circuits
- Features three power modes: High power mode for normal circuits, Low power mode for precision tracing in difficult areas and Clamp power mode provides a boosted induction signal via the optional signal clamp
- Includes a Signal Clamp (CT-400) clamp-on attachment for inducing a signal in wires where you don t have access to bare conductors
- See more on Amazon...
Brand: Amprobe | Manufacturer: Fluke Corporation
Dimensions: 9.00 x 16.90 x 14.30 Inches
See On Amazon #17
AUTOAND Circuit Tester 6V-24V DC Car Power Circuit Probe Kit for Polarity Test & Component Activation Electrical Tester with Overload Protection, LED Test Light, Circuit Breaker Finder with 4M Lead
Asin: B09QC98ZQZ
[Component Test & Diode Test] Contact The Probe Tip To The Positive Terminal Of The Tested Component To Active The Component. It Can Detect Whether There Is A Large Current Flowing Through The Element And Whether The Negative Electrode Of The Detection Element Is Well Grounded. Quickly Test Diode Assembly Operation And Determine If Circuits Are Opened Or Continuous. When The Grounding Is Good, The Green Light Will Be On And A "Beep" Will Sound..
[Practical Diagnostictool] The 4M Extra-Long Cable Enables You To Easily And Conveniently Inspect The Entire Circuit System Of The Car. This Is A Trustworthy And Reliable Circuit Tester, Ideal For Novice And Professional Use. To Ensure Your Shopping Experience, We Provide Hassle-Free After-Sales Service For You. If You Have Any Questions, Please Feel Free To Contact Us..
[Current Overload Protection & Locating Short Circuits]: When The Current Is Overloaded, The Car Circuit Tester Machine Will Automatically Open Circuit Protection And Emit A "Beep" Sound To Reduce Unnecessary Losses And Make Our Products Durable. If Led Light Green With Buzzer, Short Circuit Or Overloading Component Appears In This Side. Following The Wire In The Direction Of The Short Can Help You Find The Location Of The Short..
[Polarity Test & Continuity Test] When The Polarity Of The Circuit Under Test Is Unknown, This Circuit Tester Can Help You Quickly Identify The Positive And Negative Poles Of The Circuit, And Whether The Circuit Is In A Continuous State Or An Open State. The Red Light Is On When The Probe Tip Is In Contact With The Positive Pole Or The Circuit Is Open, And The Green Light Is On When The Probe Tip Is In Contact With The Negative Pole Or The Circuit Is In A Continuous State..
Features
- [Multifunctional Circuit Tester] The circuit tester can quickly and efficiently test all 6V to 24V car circuit systems, and is the best tool to shorten the diagnosis time of automotive circuit systems. It is perfectly for polarity test, continuity test, components test, jumper lead operation, grounding test, short circuit following and locating, etc.
- [Polarity Test & Continuity Test] When the polarity of the circuit under test is unknown, this circuit tester can help you quickly identify the positive and negative poles of the circuit, and whether the circuit is in a continuous state or an open state. The red light is on when the probe tip is in contact with the positive pole or the circuit is open, and the green light is on when the probe tip is in contact with the negative pole or the circuit is in a continuous state.
- [Component Test & Diode Test] Contact the probe tip to the positive terminal of the tested component to active the component. It can detect whether there is a large current flowing through the element and whether the negative electrode of the detection element is well grounded. Quickly test diode assembly operation and determine if circuits are opened or continuous. When the grounding is good, the green light will be on and a beep will sound.
- [Current Overload Protection & Locating Short Circuits]: When the current is overloaded, the car circuit tester machine will automatically open circuit protection and emit a beep sound to reduce unnecessary losses and make our products durable. If LED light green with buzzer, short circuit or overloading component appears in this side. Following the wire in the direction of the short can help you find the location of the short.
- [Practical DiagnosticTool] The 4m extra-long cable enables you to easily and conveniently inspect the entire circuit system of the car. This is a trustworthy and reliable circuit tester, ideal for novice and professional use. To ensure your shopping experience, we provide hassle-free after-sales service for you. If you have any questions, please feel free to contact us.
- See more on Amazon...
Brand: AUTOAND | Manufacturer: AUTOAND
See On Amazon #18
Amprobe AT-6010 Advanced Wire Tracer Kit
Asin: B07SG6SY8F | Model: AT-6010 | PartNumber: AT-6010 | Ean: 0095969890502 | UPC: 095969890502
Simple One Button Transmitter Operation.
Compatible With The Ct-400 Signal Clamp Accessory For Inducing A Tracing Signal On The Cable When There Is No Access To Bare Conductors.
Rated Cat Iii 600 V For Work Directly On An Energized Circuits Without Taking Equipment Offline.
Features
- Large LCD Receiver screen with two digit readout, bar graph and sound to easily determine wire location
- Rated CAT III 600 V for work directly on an Energized circuits without taking equipment offline
- Simple one button Transmitter operation
- Compatible with the CT-400 Signal Clamp accessory for inducing a tracing signal on the cable when there is no access to bare conductors
- See more on Amazon...
Brand: Amprobe | Manufacturer: Fluke Corporation
Dimensions: 8.00 x 12.00 x 7.50 inches | Weight: 3.85 Pounds
Warranty: 1 Year Warranty Against Manufacturer Defects
See On Amazon #19
ALLOSUN Digital Cable Length Multimeter Wire Gauge Phone LAN Network Tracker Tester Temp Ohm Resistance Meter
Asin: B013UKP1IW | Model: EM5812 | PartNumber: EM5812
Resistance Measurement Range:0.1Mω---1999.9Ω.
The Meter Goes Into Sleep Mode After About 10 Minutes Of Inactivity..
20 Pre-Set Wire Gauge Settings:18Awg,16Awg,14Awg,12Awg,10Awg,6Awg,4Awg,2Awg,1/0,2/0,3/0,4/0,250Kcmil, 350Kcmil,400Kcmil,500Kcmil,600Kcmil,750Kcmil,1000Kcmil. 8 Memory Locations In User Select Mode.
Length Measurement Range: 0 - 100Kft, Or 0 - 30Km..
Features
- Power supplied by 6 pieces 1.5V, AA battery or equivalent.(Battery not provided by seller )
- Length Measurement Range: 0 - 100kft, or 0 - 30km.
- Resistance Measurement Range:0.1m ---1999.9
- 20 pre-set wire gauge settings:18AWG,16AWG,14AWG,12AWG,10AWG,6AWG,4AWG,2AWG,1/0,2/0,3/0,4/0,250kcmil, 350kcmil,400kcmil,500kcmil,600kcmil,750kcmil,1000kcmil. 8 memory locations in user select mode
- The meter goes into Sleep mode after about 10 minutes of inactivity.
- See more on Amazon...
Brand: ALLOSUN | Manufacturer: Zhangzhou Eastern Intelligent Meter Co., Ltd
Dimensions: 7.87 x 3.94 x 2.36 Inches | Weight: 1.32 Pounds
See On Amazon #20
RIDGID 21903 SeekTech ST-510 Compact Line Transmitter, 10-Watt Underground Cable Locator and Utility Locator Small
Asin: B00164UWC0 | Model: 21903 | PartNumber: 21903 | Ean: 0095691219039 | UPC: 095691219039
Fully Variable Power Output: 10 Watts Of Fully Variable Power Output To Maximize Battery Life And Push The Signal Further Down The Run For Better Utility Locating And Large-Diameter Pipe Location.
User-Friendly Design: Features Audio Feedback That Confirms A Good Circuit Before You Begin A Trace And A Carry Handle And Straps For Easy Maneuvering During Locates.
Extended Range 25' Terminal Leads: Easy To Attach By Using The Included Heavy-Duty Clips Or Built-In Magnets And Have Built-In Edge Scrape Paint For Superior Connection.
Lcd Display: Provides Instant Visual Feedback About Line Resistance, Impedance, And Current Flow, Ensuring That Circuit Information Is Easy To Read During Underground Wire Locating.
Features
- COMPACT LINE TRANSMITTER: Makes it easy to energize metallic lines or pipes underground to allow for tracing with a compatible locator such as the RIDGID SeekTech SR-20 or SR-60
- LCD DISPLAY: Provides instant visual feedback about line resistance, impedance, and current flow, ensuring that circuit information is easy to read during underground wire locating
- FULLY VARIABLE POWER OUTPUT: 10 watts of fully variable power output to maximize battery life and push the signal further down the run for better utility locating and large-diameter pipe location
- EXTENDED RANGE 25' TERMINAL LEADS: Easy to attach by using the included heavy-duty clips or built-in magnets and have built-in edge scrape paint for superior connection
- USER-FRIENDLY DESIGN: Features audio feedback that confirms a good circuit before you begin a trace and a carry handle and straps for easy maneuvering during locates
- See more on Amazon...
Brand: RIDGID | Manufacturer: Ridgid Tool Company
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 9.04 Pounds
See On Amazon #21
Power Circuit Probe Tester 6-30V AC/DC Voltage Tester Resistance&Diode Circuit Tester Component Activation Electrical Tester with Flashlight, TFT Color Display, 39FT Long Test Lead,Overload Protection
Asin: B09N6Y33LY | Ean: 0661706276252 | UPC: 661706276252
【Electronic Component Activation&Polarity/Continuity Test】The Probe Tester Is Suitable For Diagnosing All 6-30V Vehicle Electrical Systems.With A Simple Hook-Up Of The Tool To The Vehicle's Battery,You Can Operate Polarity Test, Continuity Test, M.A.P Sensor Circuit Test, Trailer Lights Connection Test, Electronic Components Activation, Bad Ground Contacts Test, Follow&Locate Short Circuits Without Wasting Fuses.Note:The Power Supply Voltage Is 9-30V,And The Detected Circuit Voltage Is 0.1-100V..
【Tft Color Display & 7 Languages Options & 2 Power Supply Modes】The Power Tester Adopts High-Definition Tft Color Screen, Which Can Show The Test Results Clearly And Easy To Read. Probe Tester Supports 7 Languages. You Can Choose From English, German, Spanish, French, Italian, Russian, Portuguese. The Circuit Tester Is Equipped With Battery Clamps Adapter And Cigarette Lighter Adapter. It Can Be Powered By Vehicle Battery Or Cigarette Lighter, No Additional Batteries Or Wires Pulling Needed..
【Circuit Tester With Quick Self-Test & Current Overload Protection】Before You Test A Circuit Or Component, You Can Ensure Your Probe Tester Is In Good Condition By Doing A Quick Self-Test. The Power Circuit Probe Tester Is Short-Circuit Protected By Its Overload Protection. You Can Test Poor Ground Contacts Directly Without Performing Voltage Drop Tests, Its Internal Circuit Breaker Will Automatically Trip To Protect The Circuit If It Becomes Overloaded..
【39Ft Ultra Extension Inspection Cable & Led Flashlight Electric Testers】The Power Circuit Probe Kit Is Equipped With A 39Ft Extension Inspection Cable, Which Could Cover From The Front To The Rear Of The Vehicle, You Can Easily Inspect The Entire Electrical Circuit System Of The Vehicle. Its Built-In Auxiliary Ground Lead Could Assist Continuity Test. The Circuit Tester Also Equipped With 2 Led Flashlight On The Head, Allowing You To Work Easily In Dark Conditions..
【Ac/Dc Voltage Test Mode Voltage Tester】Ac Voltage Test Detects The Maximum And Minimum Voltage, Supply Frequency And Duty Cycle Of The Circuit Under Test. Dc Voltage Test Detects The Dc Voltage Value Of The Circuit Under Test..
Features
- Resistance & Diode Test Mode Electrical Tester Power circuit probe tester can detect the resistance between the probe tip and the auxiliary ground lead in resistance test mode. Power tester also can quickly test the operation of the diode assembly and determines if it is conducting in diode test mode.
- AC/DC Voltage Test Mode Voltage Tester AC voltage test detects the maximum and minimum voltage, supply frequency and duty cycle of the circuit under test. DC voltage test detects the DC voltage value of the circuit under test.
- Electronic Component Activation&Polarity/Continuity Test The probe tester is suitable for diagnosing all 6-30V vehicle electrical systems.With a simple hook-up of the tool to the vehicle's battery,you can operate polarity test, continuity test, M.A.P sensor circuit test, trailer lights connection test, electronic components activation, bad ground contacts test, follow&locate short circuits without wasting fuses.Note:The power supply voltage is 9-30V,and the detected circuit voltage is 0.1-100V.
- 39FT Ultra Extension Inspection Cable & LED Flashlight Electric Testers The power circuit probe kit is equipped with a 39FT extension inspection cable, which could cover from the front to the rear of the vehicle, you can easily inspect the entire electrical circuit system of the vehicle. Its built-in auxiliary ground lead could assist continuity test. The circuit tester also equipped with 2 LED flashlight on the head, allowing you to work easily in dark conditions.
- TFT Color Display & 7 Languages Options & 2 Power Supply Modes The power tester adopts high-definition TFT color screen, which can show the test results clearly and easy to read. Probe tester supports 7 languages. You can choose from English, German, Spanish, French, Italian, Russian, Portuguese. The circuit tester is equipped with battery clamps adapter and cigarette lighter adapter. It can be powered by vehicle battery or cigarette lighter, no additional batteries or wires pulling needed.
- Circuit Tester with Quick Self-Test & Current Overload Protection Before you test a circuit or component, you can ensure your probe tester is in good condition by doing a quick self-test. The power circuit probe tester is short-circuit protected by its overload protection. You can test poor ground contacts directly without performing voltage drop tests, its internal circuit breaker will automatically trip to protect the circuit if it becomes overloaded.
- See more on Amazon...
Brand: KAISAL | Manufacturer: KAISAL
See On Amazon #22
ZKTOOL Power Circuit Probe Tester Tester Light 6V-24V DC Tools Component Activation Electrical Tester Polarity Identify Continuity Tester with Indicator Light,Long Probe, Alligator Clip.
Asin: B095RXRDBZ | Model: 1068 | PartNumber: 1068 | Ean: 0765157524600, 0734541856252 | UPC: 734541856252, 765157524600
Application: 1 Clamp The Red Clip On The Positive Pole Of The Car Battery, 2 Clamp The Black Clip On The Negative Pole Of The Car Battery, 3 Connect The Car Power Probe To The Bad Point Of 6-24V Dc. You Can Conduct Positive And Negative Battery Currents To The Probe By Shaking The Power Switch Forward Or Backward. The Cable Length Is About 4M. The Device Has Short-Circuit Protection, When The Current Exceeds 7A, The Device Will Automatically Cut Off The Current..
Remind：Do Not Use This Item Near Explosive Gas, Vapor Or Dust. When Pressing The Power Switch (Note: Or Shaking), The Battery Current Will Be Directly Conducted To The Pen Tip, Which May Cause Sparks Can Be Caused When Touching The Ground Or Certain Circuits. Do Not Use The Device Under 11O/220V Indoor Current, Only For Dc6~24V System。There Are Detailed Instructions In The Product Box, Please Refer To The Operation..
Features：Power Circuit Probe Kit Has Two Obvious Reminders, Sound And Flash, So You Can Still Use It Even In Low Light Conditions. Sound:Beep. There Are Operation Videos Below, Which Can Be Watched In Detail..
Contains: 1 X Power Scan, 1 X Probe Tip, 1 X Battery Hookup Clips, 1 X User Manual, 2 X Red Clips. Lead Length: About 4M / 157.Sinch, Which Is Convenient For You To Measure The Polarity Of The Vehicle's Various Orientation Circuits..
Features
- Function: Continuity tester for testing components inside and outside the vehicle electrical system: This electrical tester can be used to test and activate components inside and outside the vehicle electrical system, testing voltage polarity, relays and diodes, fuses and circuit continuity, checking lights, checking motors, Track and locate short circuits, test for poor grounding, test cable and plug polarity, measure 2V to 24V DC voltage, etc.
- Contains: 1 x Power Scan, 1 x Probe Tip, 1 x Battery Hookup Clips, 1 x User Manual, 2 x red clips. Lead length: about 4M / 157.Sinch, which is convenient for you to measure the polarity of the vehicle's various orientation circuits.
- Application: 1 Clamp the red clip on the positive pole of the car battery, 2 Clamp the black clip on the negative pole of the car battery, 3 Connect the car power probe to the bad point of 6-24V DC. You can conduct positive and negative battery currents to the probe by shaking the power switch forward or backward. The cable length is about 4m. The device has short-circuit protection, when the current exceeds 7A, the device will automatically cut off the current.
- Features Power Circuit Probe Kit has two obvious reminders, sound and flash, so you can still use it even in low light conditions. Sound:Beep. There are operation videos below, which can be watched in detail.
- remind Do not use this item near explosive gas, vapor or dust. When pressing the power switch (Note: or shaking), the battery current will be directly conducted to the pen tip, which may cause Sparks can be caused when touching the ground or certain circuits. Do not use the device under 11o/220V indoor current, only for DC6~24V system There are detailed instructions in the product box, please refer to the operation.
- See more on Amazon...
Brand: ZKTOOL | Manufacturer: ZKTOOL
Dimensions: 1.57 x 10.43 x 3.54 inches | Weight: 0.71 Pounds
See On Amazon #23
Triplett POE1000ILT Byte Brothers Inline Power Panel PoE Analyzer and CAT 5/6 Digital Voltmeter with Tracer Probe
Asin: B09FCJLSTF | Ean: 0614395003937 | UPC: 614395003937
Designed As A Long Term Practical Monitoring Device, The Power Panel Can Remain Inline Between Two Devices Without Affecting The Communication.
Included Probe Is Used As A Wire Locator To Audibly Trace The Tone Placed On The Wires By The Power Panel Main Unit.
Locate The Active Devices And Voltage On The Ethernet Cable Or Port; Display The Speed (10,100,1000), Duplex And Pinouts Of The Devices.
Plug Into Any Device With An Ethernet Plug: Computer, Switch, Voip Phone, Ip Camera Or Access Point.
Features
- Quickly understand the data and power on a Cat5/5e/6/6a/7/8 cable, the Power Panel scans each pin on a connector and displays both the activity and the pair location
- Plug into any device with an Ethernet plug: computer, switch, VoIP phone, IP camera or access point
- Designed as a long term practical monitoring device, the Power Panel can remain inline between two devices without affecting the communication
- Locate the active devices and voltage on the Ethernet cable or port; Display the speed (10,100,1000), duplex and pinouts of the devices
- Included probe is used as a wire locator to audibly trace the tone placed on the wires by the Power Panel main unit
- See more on Amazon...
Brand: Triplett | Manufacturer: Triplett Test Equipment and Tools
Dimensions: 3.50 x 9.50 x 7.25 inches | Weight: 1.00 Pounds
See On Amazon #24
Short Finder Circuit Tester Polarity/Jumper Lead Electrical Tester Overload&Insulation Protection Continuity Tester Automotive Tools with Buzzer Prompt,13FT Long Wire,for 6-24V DC Test
Asin: B093P4QNS6 | Model: tester tool-11 | PartNumber: tester tool-11 | Ean: 0758358920395 | UPC: 758358920395
【Overload Protection&Buzzer Prompt&Double Insulation Protection】Overload Protection Of The Electrical Tester Ensures The Safety Of The User And The Battery By Disconnecting The Circuit And Buzzing Prompt.When The Current Exceeds 10A,It Will Automatically Disconnect The Current.Circuit Tester Uses Insulating Materials That Have Passed The National Safety Compulsory Certification (Ccc) To Provide Insulation Protection,Prevent Electric Shock,And Measure With Confidence,Which Is Safe And Reliable..
【Quick Self-Check & Easy Operation & Suitable For 6-24V Dc Test】Before Starting To Test Circuits Or Components,You Can Quickly Complete The Self-Check To Determine The Tool’S Functional Usability.After A Simple Hook-Up Of The Unit To The Automotive Tools's Battery,Automotive Technician Can Conduct A Positive Or Negative Battery Current To The Tip By Rocking The Power Switch Forward Or Backward.The Kit Is Suitable For 6-24V Dc Test,So Please Do Not Use It On Ac Voltage..
【Highly Sensitive Pen & Strong Bite Force Clip & 4 Meters Long Wire】Continuity Tester Has A High-Sensitivity Pen Tip,Made Of Sharp Stainless Steel,Which Can Pierce The Wire Insulation Layer To Check The Circuit.Led Signal Light Of The Circuit Tester Can Better Help You To Test,The Display Is Clear And Clear At A Glance.Red/Black Clip And The Auxiliary Ground Lead Clip Have A Strong Bite Force And Are Not Easy To Fall Off During Testing.Provide About 4 Meters Of Electrical Wire For Easy Use..
【Continuity Test & Jumper Lead Test & Tracking/Locating Short Circuit】Circuit Tester Can Use The Auxiliary Ground Lead To Detect The On-Off Of The Circuit,When Encountering A Control Switch Or Open Circuit,Black Clamp And Auxiliary Ground Wire Can Be Directly Connected Through The Equipment For Testing.When The Component Is Short-Circuited Or Overloaded, And Lead To Blown Fuse Or Circuit Breaker Tripping, Circuit Tester Can Help You Trace The Problem Wires Until The Short Is Located..
Features
- Polarity Recognition & Test/Activation Components & Grounding performance test Electrical tester can automatically identify the positive and negative poles, such as the polarity of the test voltage, cables, and plugs.Circuit tester can also quickly check and activate components,detect ignition plugs,sensors,and check switches,relays and the on-off of diodes,fuses and circuits.It can also test the grounding performance and find the wrong ground connection immediately.
- Continuity test & Jumper Lead test & Tracking/Locating Short Circuit Circuit tester can use the auxiliary ground lead to detect the on-off of the circuit,when encountering a control switch or open circuit,black clamp and auxiliary ground wire can be directly connected through the equipment for testing.When the component is short-circuited or overloaded, and lead to blown fuse or circuit breaker tripping, Circuit tester can help you trace the problem wires until the short is located.
- Overload Protection&Buzzer Prompt&Double Insulation Protection Overload protection of the electrical tester ensures the safety of the user and the battery by disconnecting the circuit and buzzing prompt.When the current exceeds 10A,it will automatically disconnect the current.circuit tester uses insulating materials that have passed the National Safety Compulsory Certification (CCC) to provide insulation protection,prevent electric shock,and measure with confidence,which is safe and reliable.
- Highly Sensitive Pen & Strong Bite Force Clip & 4 Meters Long Wire Continuity tester has a high-sensitivity pen tip,made of sharp stainless steel,which can pierce the wire insulation layer to check the circuit.LED signal light of the circuit tester can better help you to test,the display is clear and clear at a glance.Red/black clip and the auxiliary ground lead clip have a strong bite force and are not easy to fall off during testing.Provide about 4 meters of electrical wire for easy use.
- Quick Self-Check & Easy Operation & Suitable For 6-24V Dc Test Before starting to test circuits or components,you can quickly complete the self-check to determine the tool s functional usability.After a simple hook-up of the unit to the automotive tools's battery,automotive technician can conduct a positive or negative battery current to the tip by rocking the power switch forward or backward.The kit is suitable for 6-24V DC test,so please do not use it on AC voltage.
- See more on Amazon...
Brand: DUOYI | Manufacturer: DUOYI
See On Amazon #25
Amprobe AT-6030 Advanced Wire Tracer with 8 Sensitivity Modes, Signal Clamp
Asin: B07C7LJM2J | Model: AT-6030 | PartNumber: AT-6030 | Ean: 0095969842730 | UPC: 095969842730
Precision Wire Tracing Mode Precisely Pinpoints Wires Or Faults Located Behind Walls, Floors, Or Ceilings.
Non-Contact Voltage Detection Mode Utilizes Passive Tracing Without The Transmitter To Verify If A Wire Is Energized.
Breaker Identification Mode Has An Automatic Sensitivity Feature That Allows For Quick And Easy Breaker Locating.
Quick Scan Wire Tracing Mode Allows For Quick Wire Detection At A Longer Distance.
Features
- Instant and clear breaker identification: locate energized and de-energized wires, breakers, and fuses without having to disconnect any equipment
- Quick scan wire tracing mode allows for quick wire detection at a longer distance
- Precision wire tracing mode precisely pinpoints wires or faults located behind walls, floors, or ceilings
- Breaker identification mode has an automatic sensitivity feature that allows for quick and easy breaker locating
- Non-contact voltage detection mode utilizes passive tracing without the transmitter to verify if a wire is energized
- See more on Amazon...
First Available: 04/17/2018
Brand: Amprobe | Manufacturer: Amprobe (Fluke Electronics Corp)
Dimensions: 6.00 x 16.50 x 12.30 Inches | Weight: 3.75 pounds
See On Amazon #26
Mautacly New LiteVNA-64 50KHz-6.3GHz LiteVNA 4Inch Touch Screen Vector Network Analyzer HF UHF Antenna Analyzer Update of
Asin: B0CK487GZN | Ean: 4712205651982
Litevna Has A -Sd Slot, You Can Save Test Data Or Screen To The -Sd Card At Any Time.
The 6.3Ghz Measurement Range, In Addition To Meeting Common Amateur Radio And Internet Of Things Applications, Can Also Handle 5Ghz Testing, 5.8Ghz Wifi And 5.8Ghz Image Transmission..
In Order To Reduce Power Consumption And Volume, Litevna Uses Only One Mixer, Through The Internal Rf Switch, Can Perform S11, S21 Measurement, And Can Perform Tdr And Dtf Measurement After Ifft Calculation..
Litevna As Small As And Has An Ultra-Wide Measurement Range Of 50Khz-6.3Ghz, A Portable Vector Network Analyzer (Vna)..
Features
- In addition to a measurement range, LiteVNA also has faster scanning speed and more scanning points. The operation interface consistent with makes it easy to use LiteVNA as a tool for field testing.
- LiteVNA as small as and has an ultra-wide measurement range of 50kHz-6.3GHz, a portable vector network analyzer (VNA).
- LiteVNA has a -SD slot, you can save test data or screen to the -SD card at any time
- In order to reduce power consumption and volume, LiteVNA uses only one mixer, through the internal RF switch, can perform S11, S21 measurement, and can perform TDR and DTF measurement after IFFT calculation.
- The 6.3GHz measurement range, in addition to meeting common amateur radio and Internet of Things applications, can also handle 5GHz testing, 5.8GHz wifi and 5.8GHz image transmission.
- See more on Amazon...
Brand: Mautacly | Manufacturer: Mautacly
See On Amazon #27
DEBLAN Air Conditioning Service checke Type 4 Detector Maintenance and Detection Fault Repair
Asin: B0CZZZ5XFV | Model: DEBLAN | PartNumber: DEBLAN | Ean: 5028889861890
【Excellent Material】Adopts High-Strength Engineering Plastic, Ergonomic Shell Design; Not Easy To Slip. The Overall Unit Is Strong And Sturdy, Significantly Extending The Its Service Life..
【Customer First】If You Encounter Any Problems, Please Contact Us, We Will Provide You With Solutions Within 24 Hours, Your Satisfaction Is Our Motivation..
【Industrial-Grade Design】It Is Equipped With Design To Ensure The Durability And Versatility Of The Gauge..
【Widely Applicable】The Instrument Is An Auxiliary Instrument For The Installation, Testing And Maintenance Of Refrigeration Equipment Such As Air Conditioners, And Cold Storage..
Features
- Quick Solution It can quickly help you find the problems in your air conditioning unit and help you solve them better.
- Widely Applicable The instrument is an auxiliary instrument for the installation, testing and maintenance of refrigeration equipment such as air conditioners, and cold storage.
- Excellent Material Adopts high-strength engineering plastic, ergonomic shell design; not easy to slip. The overall unit is strong and sturdy, significantly extending the its service life.
- Industrial-Grade Design It is equipped with design to ensure the durability and versatility of the gauge.
- Customer First If you encounter any problems, please contact us, we will provide you with solutions within 24 hours, your satisfaction is our motivation.
- See more on Amazon...
Brand: DEBLAN | Manufacturer: DEBLAN
Weight: 11.02 Pounds
See On Amazon #28
DEBLAN Air Conditioning Accessories Split Machine Detector Transmission Monitor TM2016-1
Asin: B0D117Q5TW | Model: DEBLAN | PartNumber: DEBLAN | Ean: 5028889861883
【Excellent Material】Adopts High-Strength Engineering Plastic, Ergonomic Shell Design; Not Easy To Slip. The Overall Unit Is Strong And Sturdy, Significantly Extending The Its Service Life..
【Customer First】If You Encounter Any Problems, Please Contact Us, We Will Provide You With Solutions Within 24 Hours, Your Satisfaction Is Our Motivation..
【Industrial-Grade Design】It Is Equipped With Design To Ensure The Durability And Versatility Of The Gauge..
【Widely Applicable】The Instrument Is An Auxiliary Instrument For The Installation, Testing And Maintenance Of Refrigeration Equipment Such As Air Conditioners, And Cold Storage..
Features
- Quick Solution It can quickly help you find the problems in your air conditioning unit and help you solve them better.
- Widely Applicable The instrument is an auxiliary instrument for the installation, testing and maintenance of refrigeration equipment such as air conditioners, and cold storage.
- Excellent Material Adopts high-strength engineering plastic, ergonomic shell design; not easy to slip. The overall unit is strong and sturdy, significantly extending the its service life.
- Industrial-Grade Design It is equipped with design to ensure the durability and versatility of the gauge.
- Customer First If you encounter any problems, please contact us, we will provide you with solutions within 24 hours, your satisfaction is our motivation.
- See more on Amazon...
Brand: DEBLAN | Manufacturer: DEBLAN
Weight: 6.61 Pounds
See On Amazon #29
DEBLAN Air Conditioning Maintenance Service checke VRV Computer Detector with Control
Asin: B0D1125CT6 | Model: DEBLAN | PartNumber: DEBLAN | Ean: 5028889861876
【Excellent Material】Adopts High-Strength Engineering Plastic, Ergonomic Shell Design; Not Easy To Slip. The Overall Unit Is Strong And Sturdy, Significantly Extending The Its Service Life..
【Customer First】If You Encounter Any Problems, Please Contact Us, We Will Provide You With Solutions Within 24 Hours, Your Satisfaction Is Our Motivation..
【Industrial-Grade Design】It Is Equipped With Design To Ensure The Durability And Versatility Of The Gauge..
【Widely Applicable】The Instrument Is An Auxiliary Instrument For The Installation, Testing And Maintenance Of Refrigeration Equipment Such As Air Conditioners, And Cold Storage..
Features
- Quick Solution It can quickly help you find the problems in your air conditioning unit and help you solve them better.
- Widely Applicable The instrument is an auxiliary instrument for the installation, testing and maintenance of refrigeration equipment such as air conditioners, and cold storage.
- Excellent Material Adopts high-strength engineering plastic, ergonomic shell design; not easy to slip. The overall unit is strong and sturdy, significantly extending the its service life.
- Industrial-Grade Design It is equipped with design to ensure the durability and versatility of the gauge.
- Customer First If you encounter any problems, please contact us, we will provide you with solutions within 24 hours, your satisfaction is our motivation.
- See more on Amazon...
Brand: DEBLAN | Manufacturer: DEBLAN
Weight: 11.02 pounds
See On Amazon #30
Mautacly SMA-Type 50 Ohm Vector Network Analyzer Calibration Kit Load &Short &Open
Asin: B0BXKLYKD4 | Ean: 4712594161222
Condition: 100% New.
The Sma Load Terminal Is Stainless Steel With A Low Standing Wave. 50 Ohm Stainless Steel Load, Low Standing Wave, Dc-6 Ghz (1 Mhz-6 Ghz), The Standing Wave Is Basically Around 1.02..
Frequency: Dc-6Ghz, The Standard Load Full-Band Standing Wave Is Lower Than 1,025..
Features
- A of vector network analyzer calibration kits, including SMA open, SMA short, a 50 standard load, and the interface is SMA male (female thread).
- Frequency: DC-6GHz, the standard load full-band standing wave is lower than 1,025.
- Condition: 100% new
- The SMA load terminal is stainless steel with a low standing wave. 50 ohm stainless steel load, low standing wave, DC-6 GHz (1 MHz-6 GHz), the standing wave is basically around 1.02.
- See more on Amazon...
Brand: Mautacly | Manufacturer: Mautacly
Dimensions: 0.79 x 1.97 x 1.18 inches | Weight: 0.03 Pounds
See On Amazon
Looking For Something Else?
Search