Igloo Playmate Cooler Replacement Button and Spring
Asin: B00069PGG8 | Ean: 0034223097837 | UPC: 034223097837
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.To Install: Fully Open Your Cooler Lid To Where The Button Hole Is Clear And Visible. Set The Cooler On End So The Button Hole Is Straight Up. Insert The Spring In Hole And Align Plastic Cap On Spring. While Depressing The Button (Holding It In), Close Your Cooler Lid, And The Button Should Pop Right Into Place..
Care: Wipe Surfaces Clean Between Uses. Light Dirt Or Stains Can Be Cleaned With Water Or Mild Detergent. Ensure That All Cleaning Agents Are Rinsed And Dry Completely Before Storage..
Made By Igloo..
Fits Playmate Armortm Model 43400, Playmate Minitm Model 13054, Playmate The Bosstm Model 43582, And Obsolete Playmate, Playmate Plustm, Little Playmatetm.
Features
- Includes 2 pieces: 1 Plastic Button, 1 Metal Spring
- Fits Playmate ArmorTM model 43400, Playmate MiniTM model 13054, Playmate The BossTM model 43582, and obsolete Playmate, Playmate PlusTM, Little PlaymateTM
- To install: Fully open your cooler lid to where the button hole is clear and visible. Set the cooler on end so the button hole is straight up. Insert the spring in hole and align plastic cap on spring. While depressing the button (holding it in), close your cooler lid, and the button should pop right into place.
- Made by Igloo.
- Care: Wipe surfaces clean between uses. Light dirt or stains can be cleaned with water or mild detergent. Ensure that all cleaning agents are rinsed and dry completely before storage.
- See more on Amazon...
Brand: Igloo | Manufacturer: Igloo
Dimensions: 0.55 x 0.90 x 0.90 inches
See On Amazon Similar To Igloo Playmate Cooler Replacement Button
#1
Igloo Replacement Threaded Drain Plug
Asin: B0006FQJPY | Model: 24011 | PartNumber: 24011 | Ean: 0034223093051, 0615293952600 | UPC: 615293952600, 034223093051
Double Check Your Cooler's Drain Plug Hole Size And Cooler Wall Thickness. This Is Not A Universal Drain Plug For Igloo Coolers, As There Are Other Sizes Available..
Made By Igloo..
Threaded Cap Seals Tight To Prevent Leaks. Plastic Tether Helps Prevent Cap Loss..
Features
- Fits Igloo coolers with an approx 1 inch outer diameter drain plug hole and approx 1-1/16 inch cooler wall thickness.
- Threaded cap seals tight to prevent leaks. Plastic tether helps prevent cap loss.
- DOUBLE CHECK your cooler's drain plug hole size and cooler wall thickness. This is NOT a universal drain plug for Igloo coolers, as there are other sizes available.
- Made by Igloo.
- See more on Amazon...
Brand: Igloo | Manufacturer: Igloo
Dimensions: 1.00 x 6.00 x 4.00 inches | Weight: 0.07 pounds
Warranty: Warranty
See On Amazon #2
Igloo Cooler Plastic Parts Kit - 2 Latches, 3 Hinges, Latch Post & Screws
Asin: B09LJ1KN2B | Model: Igloo Plastic Parts Kit | PartNumber: Igloo Plastic Parts Kit
Hinge Size: 2.25" X 1.25"..
Easy To Install. Made In The Usa..
Igloo Cooler Parts Contain Uv Inhibitors To Protect Against Sun Damage And Breakdown, And Are Rugged And Durable For A Long Cooler Life..
Latch Fits Most Igloo Ice Chests 50-165 Quart Coolers With Latches That Secure With A Single-Screw Button Post. Features Igloo Logo On Latch Front..
Features
- Made by Igloo. Kit includes: 2 plastic latches (each latch comes with a single-screw button post pre-snapped in), 3 plastic hinges, 18 screws (stainless steel, hi-low thread).
- Latch fits most Igloo Ice Chests 50-165 Quart Coolers with latches that secure with a single-screw button post. Features Igloo logo on latch front.
- Hinge Size: 2.25 x 1.25.
- Igloo cooler parts contain UV inhibitors to protect against sun damage and breakdown, and are rugged and durable for a long cooler life.
- Easy to Install. Made in the USA.
- See more on Amazon...
Brand: Igloo | Manufacturer: Igloo
Dimensions: 0.50 x 6.00 x 8.00 Inches | Weight: 0.18 pounds
See On Amazon #3
Igloo Cooler Threaded Drain Plug Caps with Plastic Tether 20049 White Small
Asin: B00CEQ433S | Model: 20049 | PartNumber: 20049 | Ean: 0034223200497 | UPC: 034223200497
Threaded Cap Seals Tight To Prevent Leaks..
Igloo Part #20049..
Tether Helps Prevent Cap Loss..
Compatible With Igloo's Threaded Drain Plug, Which Is Typically Used On Coolers Size 72 Quarts And Larger..
Features
- Made by Igloo. Includes: 2 threaded caps with plastic tether.
- Compatible with Igloo's threaded drain plug, which is typically used on coolers size 72 Quarts and larger.
- Threaded cap seals tight to prevent leaks.
- Tether helps prevent cap loss.
- Igloo part #20049.
- See more on Amazon...
Brand: Igloo | Manufacturer: Igloo
Dimensions: 8.25 x 5.88 x 1.00 inches | Weight: 0.03 pounds
Warranty: N/a.
See On Amazon #4
Igloo Playmate Elite Cooler Red/White, 16 Qt
Asin: B000BO5VH2 | Model: 32601 | PartNumber: 32601 | Ean: 0034223433635, 0100065950750, 0362225234425, 0034223433628, 0787468800846 | UPC: 362225234425, 100065950750, 034223433635, 787468800846, 034223433628
Molded-In Easy-Carry Handle.
Perfect For Picnics And Camping Trips.
Tent-Shaped Locking Lid Helps Prevent Spills.
Features
- Top push-button for easy one-hand opening
- Tent-shaped locking lid helps prevent spills
- Molded-in easy-carry handle
- Perfect for picnics and camping trips
- See more on Amazon...
First Available: 05/25/2010
Brand: Igloo | Manufacturer: Igloo
Dimensions: 14.96 x 15.75 x 10.24 Inches | Weight: 4.18 pounds
See On Amazon #5
Igloo Push-Button Spigot for 2-10 Gallon Water Cooler Beverage Jugs
Asin: B000NRJQ3C | Model: 24009 | PartNumber: 24009 | Ean: 0034223097950, 0034223095901 | UPC: 034223095901, 034223097950
Angled Pour Spout For Easy Dispensing. Drip-Resistant Valve..
See Cooler Bottom To Find Model Number..
Igloo's Spigot Assembly Consists Of The Following Components: Main Body With Spout, Rubber Gasket, Plastic Washer, And Plastic Nut..
Front Access, Push Button-Style Spigot..
Features
- Made by Igloo. For use on Igloo brand 2-10 gallon beverage water cooler jugs (see full list below).
- Front access, push button-style spigot.
- Angled pour spout for easy dispensing. Drip-resistant valve.
- Igloo's spigot assembly consists of the following components: main body with spout, rubber gasket, plastic washer, and plastic nut.
- See cooler bottom to find model number.
- See more on Amazon...
First Available: 06/15/2012
Brand: Igloo | Manufacturer: Igloo
Dimensions: 1.18 x 1.97 x 1.97 inches | Weight: 0.05 pounds
Warranty: Warranty
See On Amazon #6
Igloo Replacement Triple Snap Drain Plug
Asin: B000Y82Q1Y | Model: 24010 | PartNumber: 24010 | Ean: 0400138129381, 0720171845490, 0034223097912, 0034223240103 | UPC: 720171845490, 034223097912, 400138129381, 034223240103
Easy Installation: Place Plug Through Cooler, Screw Down Gasketed Nut..
Includes: 1 Drain Plug With Push-To-Close Cap And Nut With Gasket & Washer..
Triple-Snap Cap Seals Tight To Prevent Leaks, Tethered Cap Helps Prevent Cap Loss..
Triple Snap (Push-To-Close) Tethered Cap..
Features
- Made by Igloo. Fits Igloo coolers with an approximate 7/8" inch outer diameter drain plug hole and 7/16 inch cooler wall thickness.
- Triple snap (push-to-close) tethered cap.
- Easy installation: Place plug through cooler, screw down gasketed nut.
- Triple-snap cap seals tight to prevent leaks, tethered cap helps prevent cap loss.
- Includes: 1 drain plug with push-to-close cap and nut with gasket & washer.
- See more on Amazon...
Brand: Igloo | Manufacturer: Igloo
Dimensions: 4.75 x 3.31 x 1.37 inches | Weight: 0.03 pounds
Warranty: Warranty.
See On Amazon #7
Igloo Trailmate Cooler Replacement Snap-On Hinge, Plastic, Black
Asin: B09S1F5DT1 | Model: 9055 | PartNumber: 9055
Approximate Hinge Dimensions: 7-3/8 Inch X 2 Inch X 3/4 Inch..
Distance Between 2 Attachment Holes: 5-5/8 Inches..
Sold Individually. Screws Not Included..
Contains Uv Inhibitors To Protect Against Sun Damage..
Features
- Made by Igloo. Fits Igloo Trailmate Coolers.
- Contains UV inhibitors to protect against sun damage.
- Approximate hinge dimensions: 7-3/8 inch x 2 inch x 3/4 inch.
- Sold Individually. Screws not included.
- Distance between 2 attachment holes: 5-5/8 inches.
- See more on Amazon...
Brand: Igloo | Manufacturer: Igloo
Dimensions: 0.75 x 2.13 x 7.38 inches | Weight: 0.13 pounds
See On Amazon #8
Igloo Cooler Heavy-Duty Stainless Steel Parts Kit - 2 Latches, 3 Hinges, Latch Posts & Screws
Asin: B09LJ316X5
Hinge Size: 2.5" X 1.25"..
Please See Installation Diagram In Fourth Photo For Proper Installation. When Attaching The Latch To The Cooler, Turn The Latch Upside Down With The Underside Of The Latch Facing Out. Then Use 2 Of The Screws To Secure The Latch (When Installed Properly And The Latch Is Closed, The Screw Heads Should Be Not Be Seen, As The Latch Will Fold Over And Hide The Screws)..
Stainless Steel Construction Is Rust-Resistant And Durable (Long-Lasting)..
Latch Fits Most Igloo Ice Chests 50-165 Quart Coolers With Latches That Secure With A Single-Screw Button Post. Features Igloo Logo On Latch Front..
Features
- Made by Igloo. Heavy-duty parts kit includes: 2 stainless steel latches, 3 stainless steel hinges, 2 single screw attachment posts, and 18 screws (stainless steel, hi-low thread).
- Latch fits most Igloo Ice Chests 50-165 Quart Coolers with latches that secure with a single-screw button post. Features Igloo logo on latch front.
- Hinge Size: 2.5 x 1.25.
- Stainless steel construction is rust-resistant and durable (long-lasting).
- Please see installation diagram in fourth photo for proper installation. When attaching the latch to the cooler, turn the latch upside down with the underside of the latch facing out. Then use 2 of the screws to secure the latch (when installed properly and the latch is closed, the screw heads should be not be seen, as the latch will fold over and hide the screws).
- See more on Amazon...
Brand: Igloo | Manufacturer: Igloo
Dimensions: 0.04 x 2.50 x 1.25 inches
See On Amazon #9
Igloo Set of 2 Cooler Latch Posts & Screws (Part #24013)
Asin: B008BXOKHW | Model: FBA_24013 | PartNumber: FBA_24013
Ean: 7004708056553, 0751738754337, 0760625101772, 5242002640913, 0796254110915, 0724137959627, 0034223097875
UPC: 034223097875, 751738754337, 760625101772, 724137959627, 796254110915
Fits Igloo 50-165 Qt Coolers With Latches That Secure With A Single-Screw Button / Post..
Beveled Latch Edge Deflects Impact, Reducing Chance Of Breakage..
Latch Rests Close To Cooler When Unlatched In Order To Minimize Breakage. Integrated Parts And Guided Locator Post Provide Easy Assembly..
Made By Igloo. Includes 2 Igloo Latches (Each Latch Comes With A Single-Screw Button Post Pre-Snapped In) And 6 Stainless Steel Screws..
Features
- Genuine Igloo parts. Igloo Part # 24013. Features Igloo logo on latch front.
- Made by Igloo. Includes 2 Igloo latches (each latch comes with a single-screw button post pre-snapped in) and 6 stainless steel screws.
- Fits Igloo 50-165 Qt coolers with latches that secure with a single-screw button / post.
- Latch rests close to cooler when unlatched in order to minimize breakage. Integrated parts and guided locator post provide easy assembly.
- Beveled latch edge deflects impact, reducing chance of breakage.
- See more on Amazon...
Brand: Igloo | Manufacturer: IGLOO PRODUCTS CORP
Dimensions: 1.40 x 6.00 x 3.40 inches | Weight: 0.02 pounds
See On Amazon #10
Igloo 24012 Plastic Hinges for Ice Chests (1-Pair), White, Standard Size, Contain UV Inhibitors
Asin: B0006FQJR2 | Model: 24012 | PartNumber: 24012
Ean: 7495590053629, 0733427039390, 0758710428378, 0796084354862, 0752913206467, 0034223097899, 0705554381536, 5335332091217, 0400138129466
UPC: 796084354862, 400138129466, 034223097899, 705554381536, 758710428378, 733427039390, 752913206467
Igloo Cooler Parts Contain Uv Inhibitors To Protect Against Sun Damage And Breakdown, And Are Rugged And Durable For A Long Cooler Life..
Easy To Install. Made In The Usa..
Hinge Size: 2-5/16"" X 1-1/4"". Width From Center Hole To Center Hole: 1-13/16"". Height Center Hole To Center Hole: 5/8""..
Fits Most 25-165 Quart Rectangular-Shaped, Hinged Igloo Coolers..
Features
- Genuine Igloo Parts. Made by Igloo. Includes: 1 pair of Igloo hinges & 8 Igloo stainless screws.
- Fits most 25-165 quart rectangular-shaped, hinged Igloo coolers.
- Igloo cooler parts contain UV inhibitors to protect against sun damage and breakdown, and are rugged and durable for a long cooler life.
- Hinge Size: 2-5/16 x 1-1/4. Width from center hole to center hole: 1-13/16. Height center hole to center hole: 5/8.
- Easy to Install. Made in the USA.
- See more on Amazon...
Brand: Igloo | Manufacturer: Igloo
Dimensions: 1.18 x 1.97 x 1.97 inches | Weight: 0.05 Pounds
Warranty: As Labeled
See On Amazon
Looking For Something Else?
Search