COMP Cams 854-16 Retro-Fit Hydraulic Roller Lifter Set for 396-454 Chevrolet Big Block
Asin: B000CEQDPK | Model: 854-16 | PartNumber: 854-16 | Ean: 0036584770114 | UPC: 036584770114
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Decrease Friction And Increase Longevity When Directly Compared To Flat Tappet Lifters.
Accept Much More Aggressive Cam Profiles Than Flat Tappet Lifters Will Allow.
Performance Replacement For Stock Hydraulic Roller Lifters Or Retro-Fit Hydraulic Roller Lifters For Non-Roller Blocks.
Features
- .842 diameter; 137g weight; 2.49 seat height
- Performance replacement for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks
- Decrease friction and increase longevity when directly compared to flat tappet lifters
- Accept much more aggressive cam profiles than flat tappet lifters will allow
- See more on Amazon...
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 3.30 x 8.90 x 2.60 inches | Weight: 5.05 Pounds
See On Amazon Similar To COMP Cams 85416 RetroFit Hydraulic
#1
COMP Cams 08-500-8 Xtreme Energy Computer Controlled 206/212 Hydraulic Roller Cam for OE Roller SBC
Asin: B000R9XBHS | Model: 08-500-8 | PartNumber: 08-500-8 | Ean: 0036584063186 | UPC: 036584063186
206/212 Duration At .050". 112 Degree Lobe Separation Angle.
Made In Usa.
480"/.488" Valve Lift W/ 1.5 Ratio Rocker Arm.
1,000-5,000 Rpm Operating Range.
Features
- For throttle body 305 or 350, very good economy and power
- 1,000-5,000 RPM Operating Range
- 206/212 Duration at .050. 112 Degree Lobe Separation Angle
- 480/.488 Valve Lift w/ 1.5 Ratio Rocker Arm
- Made in USA
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.60 x 23.40 x 2.90 inches | Weight: 8.47 pounds
See On Amazon #2
COMP Cams 84000-16 Race Hydraulic Flat Lifter Set for Chevrolet Small and Big Block
Asin: B000CIQBZI | Model: 84000-16 | PartNumber: 84000-16 | Ean: 0036584075615 | UPC: 036584075615
Super Strict Tolerances For The Mechanical Internals Optimize Performance.
Extra Heavy-Duty Snap Ring Design Increases Lifter Strength And Durability.
Tighter Plunger To Body Tolerances And Premium One-Piece Pushrod Seats.
Features
- .842 diameter; 104g weight; 2.01 seat height
- Tighter plunger to body tolerances and premium one-piece pushrod seats
- Super strict tolerances for the mechanical internals optimize performance
- Extra heavy-duty snap ring design increases lifter strength and durability
- See more on Amazon...
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 1.90 x 7.90 x 2.10 inches | Weight: 3.50 Pounds
See On Amazon #3
COMP Cams 8121 High Energy Hydraulic Lifter
Asin: B000CIOBZ0 | Model: 812-1 | PartNumber: 812-1 | Ean: 0036584220053 | UPC: 036584220053
Continuous Contact Between Metering Valve And Hardened Pushrod Seat Is Maintained, Eliminating Excessive Oiling At High Engine Speeds.
Lightweight Check Valve Disc Allows For Quicker Response And Maintains Added Control At All Engine Speeds And Loads.
Contain A Longer Piston Than Conventional Hydraulic Lifters, Which Provides More Load Bearing Surface And Increases Lifter Longevity.
Patented Orifice Metering Valve Precisely Meters Oil To The Rocker Arms.
Features
- .842 inches diameter; 94 gram weight; 1.99 inches seat height
- Patented orifice metering valve precisely meters oil to the rocker arms
- Continuous contact between metering valve and hardened pushrod seat is maintained, eliminating excessive oiling at high engine speeds
- Contain a longer piston than conventional hydraulic lifters, which provides more load bearing surface and increases lifter longevity
- Lightweight check valve disc allows for quicker response and maintains added control at all engine speeds and loads
- See more on Amazon...
First Available: 09/11/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 0.50 x 3.00 x 4.00 inches | Weight: 0.10 pounds
Warranty: 1 Year Limited
See On Amazon #4
COMP Cams 869-16 High Energy Hydraulic Flat Lifter Set for Buick 350-455 and Cadillac 472-500
Asin: B000CISAYI | Model: 869-16 | PartNumber: 869-16 | Ean: 0036584220497 | UPC: 036584220497
Continuous Contact Between Metering Valve And Hardened Pushrod Seat Is Maintained, Eliminating Excessive Oiling At High Engine Speeds.
Lightweight Check Valve Disc Allows For Quicker Response And Maintains Added Control At All Engine Speeds And Loads.
Contain A Longer Piston Than Conventional Hydraulic Lifters, Which Provides More Load Bearing Surface And Increases Lifter Longevity.
Patented Orifice Metering Valve Precisely Meters Oil To The Rocker Arms.
Features
- .842 diameter; 98g weight; 2.05 seat height
- Patented orifice metering valve precisely meters oil to the rocker arms
- Continuous contact between metering valve and hardened pushrod seat is maintained, eliminating excessive oiling at high engine speeds
- Contain a longer piston than conventional hydraulic lifters, which provides more load bearing surface and increases lifter longevity
- Lightweight check valve disc allows for quicker response and maintains added control at all engine speeds and loads
- See more on Amazon...
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 1.90 x 7.70 x 2.20 inches | Weight: 3.48 pounds
See On Amazon #5
COMP Cams 924-16 Performance Street 1.509" OD Spring; 1.900" Installed Height; 16 Springs
Asin: B000CIQC9S | Model: 924-16 | PartNumber: 924-16 | Ean: 0036584271840 | UPC: 036584271840
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.80 x 13.40 x 3.70 inches | Weight: 5.15 pounds
Warranty: limited warranty
See On Amazon #6
COMP Cams 857-16 Retro-Fit Hydraulic Roller Lifter Set for Oldsmobile and Pontiac V8
Asin: B0014F6F36 | Model: 857-16 | PartNumber: 857-16 | Ean: 0036584049883 | UPC: 036584049883
Decrease Friction And Increase Longevity When Directly Compared To Flat Tappet Lifters.
Increases The Amount Of Horsepower And Torque Efficiently.
Accept Much More Aggressive Cam Profiles Than Flat Tappet Lifters Will Allow.
Performance Replacement For Stock Hydraulic Roller Lifters Or Retro-Fit Hydraulic Roller Lifters For Non-Roller Blocks.
Features
- .842 diameter; 136g weight; 2.49 seat height
- Performance replacement for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks
- Decrease friction and increase longevity when directly compared to flat tappet lifters
- Accept much more aggressive cam profiles than flat tappet lifters will allow
- Increases the amount of horsepower and torque efficiently
- See more on Amazon...
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 3.20 x 8.90 x 2.50 Inches | Weight: 5.29 pounds
See On Amazon #7
COMP Cams 96-202-4 High Energy 212/212 Hydraulic Flat Cam for Buick 400, 430, 455
Asin: B001R9BUDO | Model: 96-202-4 | PartNumber: 96-202-4 | Ean: 0036584601265 | UPC: 036584601265
212/212 Duration At .050". 110 Degree Lobe Separation Angle..
Fits '67-'76 Buick 400, 430 And 455.
Made In Usa.
High Energy Grinds Are A Good Blend Of Efficiency And Performance: Ideal For Performance Street Rebuilds..
Works Well With Mainly Stock Components Such As Rockers, Manifolds, Heads, Compression, Torque Converters And Gears..
0.454"/0.454" Valve Lift.
1,000-5,000 Rpm Operating Range.
Features
- Best all-around cam. Great torque and power in mid-range. Smooth idle. Best cam for towing or highway use in 455c.i.
- 1,000-5,000 RPM Operating Range
- 212/212 Duration at .050. 110 Degree Lobe Separation Angle.
- 0.454/0.454 Valve Lift
- High Energy grinds are a good blend of efficiency and performance: ideal for performance street rebuilds.
- Works well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
- Fits '67-'76 Buick 400, 430 and 455
- Made in USA
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 5.00 x 24.50 x 5.00 Inches | Weight: 10.01 pounds
See On Amazon #8
COMP Cams 853-16 Retro-Fit Hydraulic Roller Lifter Set for 265-400 Chevrolet Small Block
Asin: B000CEO7P8 | Model: 853-16 | PartNumber: 853-16 | Ean: 0036584770091 | UPC: 036584770091
Decrease Friction And Increase Longevity When Directly Compared To Flat Tappet Lifters.
Accept Much More Aggressive Cam Profiles Than Flat Tappet Lifters Will Allow.
Performance Replacement For Stock Hydraulic Roller Lifters Or Retro-Fit Hydraulic Roller Lifters For Non-Roller Blocks.
Features
- .842 diameter; 136g weight; 2.49 seat height
- Performance replacement for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks
- Decrease friction and increase longevity when directly compared to flat tappet lifters
- Accept much more aggressive cam profiles than flat tappet lifters will allow
- See more on Amazon...
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 3.20 x 8.90 x 2.60 inches | Weight: 5.25 pounds
See On Amazon #9
COMP Cams 850-16 OE-Style Hydraulic Roller Lifter Set for '87+ OE Roller SBC and LT/LS Engines.
Asin: B000CEM5CU | Model: 850-16 | PartNumber: 850-16 | Ean: 0036584770039 | UPC: 036584770039
Accept Much More Aggressive Cam Profiles Than Flat Tappet Lifters Will Allow.
Decrease Friction And Increase Longevity When Directly Compared To Flat Tappet Lifters.
Features
- Performance replacement for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks
- Decrease friction and increase longevity when directly compared to flat tappet lifters
- Accept much more aggressive cam profiles than flat tappet lifters will allow
- See more on Amazon...
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.50 x 7.90 x 2.20 inches | Weight: 4.16 pounds
Warranty: 1 Year Limited
See On Amazon #10
COMP Cams 900-16 OE-Style Hydraulic Roller Lifter Set '96+ Chevrolet GEN VI Big Block and 8.1L
Asin: B001ELNDDA | Model: 900-16 | PartNumber: 900-16 | Ean: 0036584087236 | UPC: 036584087236
Accept Much More Aggressive Cam Profiles Than Flat Tappet Lifters Will Allow.
Decrease Friction And Increase Longevity When Directly Compared To Flat Tappet Lifters.
Features
- Performance replacement for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks
- Decrease friction and increase longevity when directly compared to flat tappet lifters
- Accept much more aggressive cam profiles than flat tappet lifters will allow
- See more on Amazon...
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.50 x 7.90 x 2.20 inches | Weight: 4.50 pounds
Warranty: Limited 1 Year
See On Amazon #11
COMP Cams 8931-16 Retro-Fit Hydraulic Roller Lifter Set for Ford 289-351W
Asin: B001ELNDBM | Model: 8931-16 | PartNumber: 8931-16 | Ean: 0036584124818 | UPC: 036584124818
.875Â Diameter; 146G Weight; 2.60Â Seat Height.
Accept Much More Aggressive Cam Profiles Than Flat Tappet Lifters Will Allow.
.875” Diameter; 146G Weight; 2.60” Seat Height.
Features
- World's top manufacturer of performance products
- .875 diameter; 146g weight; 2.60 seat height
- .875 diameter; 146g weight; 2.60 seat height
- Accept much more aggressive cam profiles than flat tappet lifters will allow
- See more on Amazon...
Brand: Comp Cams | Manufacturer: Competition Cams
Dimensions: 3.10 x 8.80 x 2.50 inches | Weight: 5.60 pounds
Warranty: limited warranty
See On Amazon #12
COMP Cams 875-16 Reduced Travel OE-Style Hydraulic Roller Lifter Set for '87+ SBC and LT/LS
Asin: B000CIOCW2 | Model: 875-16 | PartNumber: 875-16 | Ean: 0036584061908 | UPC: 036584061908
Minimize Internal Piston Movement To Allow Higher Engine Rpm.
Lifter Pre-Load Should Be Set At Zero To 1/8 Of A Turn Of The Wrench On The Rocker Arm Adjusting Nut For Optimal Performance.
Designed To Perform At Higher Engine Speeds.
Features
- .842 diameter; 122g weight; 2.60 seat height
- Designed to perform at higher engine speeds
- Minimize internal piston movement to allow higher engine rpm
- Lifter pre-load should be set at zero to 1/8 of a turn of the wrench on the rocker arm adjusting nut for optimal performance
- See more on Amazon...
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.50 x 7.90 x 2.10 inches | Weight: 4.50 Pounds
See On Amazon #13
COMP Cams K11-600-8 Thumpr 227/241 Hydraulic Roller Cam K-Kit for Chevrolet Big Block 396-454
Asin: B001GETD8O | Model: K11-600-8 | PartNumber: K11-600-8 | Ean: 0036584153498 | UPC: 036584153498
227/241 Duration At .050". 107 Degree Lobe Separation Angle. 0.547"/0.53" Valve Lift.
Fits Chevrolet 396-454 Mark Iv Big Block.
Made In Usa.
Early Intake Valve Opening And Long Exhaust Duration Create Optimum Overlap For Powerful, Hard-Hitting Exhaust Note. Best With Aftermarket Converters And More Rear Gear..
Perfect Choice For Muscle Cars And Street Rods - Three Unique Cam Designs: Thumpr, Mutha' Thumpr And Big Mutha' Thumpr Deliver Excellent Horsepower Gains And Broad Torque Curve..
K Kits Vary In Their Contents, But Generally Contain A Camshaft, A Set Of Lifters, Valve Springs, Retainers, Locks, Valve Seals, Timing Set, Decals And Instructions. Check Description For More Accurate Listing Of Kit Contents..
1,900-5,500 Rpm Operating Range.
Features
- High performance street, stock converter ok, best with 2000+ converter and gears, choppy/thumping idle.
- 1,900-5,500 RPM Operating Range
- 227/241 Duration at .050. 107 Degree Lobe Separation Angle. 0.547/0.53 Valve Lift
- K Kits vary in their contents, but generally contain a camshaft, a set of lifters, valve springs, retainers, locks, valve seals, timing set, decals and instructions. Check description for more accurate listing of kit contents.
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note. Best with aftermarket converters and more rear gear.
- Perfect choice for muscle cars and street rods - Three unique cam designs: Thumpr, Mutha' Thumpr and Big Mutha' Thumpr deliver excellent horsepower gains and broad torque curve.
- Fits Chevrolet 396-454 Mark IV Big Block
- Made in USA
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 5.00 x 26.00 x 10.50 inches | Weight: 31.48 pounds
See On Amazon #14
Comp Cams 15854-2 Short Travel Race Retro-Fit Hydraulic Roller Lifter for Big Block Chevy Engines with OE Flat Tappet Camshaft - Pair
Asin: B0046ZG8N8 | Model: 15854-2 | PartNumber: 15854-2 | Ean: 0036584186687 | UPC: 036584186687
0.842 Inches Diameter; 150 Gram Weight; 2.66 Inches Seat Height.
Rem-Surfaced And Black Oxide To Reduce Valve Train Friction, Wear And Lubrication Temperatures.
Fit Type: Vehicle Specific.
Limits The Lifter’S Internal Piston Movement For Increased Durability & Performance At Higher Rpm.
0.005 Inches Recommended Preload.
Features
- For Big Block Chevy engines with OE flat tappet camshaft
- 0.005 inches recommended preload
- 0.842 inches diameter; 150 gram weight; 2.66 inches seat height
- Limits the lifter s internal piston movement for increased durability & performance at higher rpm
- REM-surfaced and black oxide to reduce valve train friction, wear and lubrication temperatures
- Fit type: Vehicle Specific
- See more on Amazon...
First Available: 09/07/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 0.80 x 6.00 x 4.00 inches | Weight: 0.65 pounds
Warranty: 1 Year Limited
See On Amazon #15
COMP Cams CL69-248-4 High Energy 212/212 Hydraulic Flat Cam/Lifter Kit Buick Grand National 231 V6
Asin: B001O0693C | Model: CL69-248-4 | PartNumber: CL69-248-4 | Ean: 0036584033936 | UPC: 036584033936
212/212 Duration At .050". 112 Degree Lobe Separation Angle. 0.459"/0.459" Valve Lift.
Fits Buick 231 Grand National 6 Cylinder.
Made In Usa.
High Energy Grinds Are A Good Blend Of Efficiency And Performance: Ideal For Performance Street Rebuilds..
Works Well With Mainly Stock Components Such As Rockers, Manifolds, Heads, Compression, Torque Converters And Gears..
Cl Kits Include A Camshaft, A Set Of Lifters, Instructions And Assembly Lubricant..
1,200-5,500 Rpm Operating Range.
Features
- Good replacement for turbo charged Grand National.
- 1,200-5,500 RPM Operating Range
- 212/212 Duration at .050. 112 Degree Lobe Separation Angle. 0.459/0.459 Valve Lift
- CL Kits include a camshaft, a set of lifters, instructions and assembly lubricant.
- High Energy grinds are a good blend of efficiency and performance: ideal for performance street rebuilds.
- Works well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
- Fits Buick 231 Grand National 6 Cylinder
- Made in USA
- See more on Amazon...
First Available: 11/29/2016
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.75 x 24.50 x 2.87 inches | Weight: 12.05 Pounds
See On Amazon #16
Comp Cams 850-4 LIFTER,SB/LT/LS OE-TYPE HYD RLR FULL TRV
Asin: B0134A5RAA | Ean: 0036584257554 | UPC: 036584257554
Brand: Comp Cams
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
See On Amazon #17
COMP Cams CL12-231-2 Xtreme 4x4 206/214 Hydraulic Flat Cam and Lifter Kit for Chevrolet Small Block
Asin: B000R9XFBU | Model: CL12-231-2 | PartNumber: CL12-231-2 | Ean: 0036584041030 | UPC: 036584041030
206/214 Duration At .050". 111 Degree Lobe Separation Angle. 0.432"/0.453" Valve Lift.
Fits Chevrolet Gen 1 Small Blocks Including The 262, 265, 267, 283, 302, 305, 307, 327, 350 And 400. Does Not Fit Lt1/Lt4, Or Factory Roller Small Blocks Built From 1985 And Newer..
Made In Usa.
Designed For Use With Common Restrictive Factory Exhaust Systems, Including Oem Exhaust Manifolds..
Improved Throttle Response And Increased Low And Mid-Range Rpm Horsepower For Towing And Off-Road..
Cl Kits Include A Camshaft, A Set Of Lifters, Instructions And Assembly Lubricant..
600-4,600 Rpm Operating Range.
Features
- Very strong torque, smooth idle, excellent mileage.
- 600-4,600 RPM Operating Range
- 206/214 Duration at .050. 111 Degree Lobe Separation Angle. 0.432/0.453 Valve Lift
- CL Kits include a camshaft, a set of lifters, instructions and assembly lubricant.
- Designed for use with common restrictive factory exhaust systems, including OEM exhaust manifolds.
- Improved throttle response and increased low and mid-range RPM horsepower for towing and off-road.
- Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer.
- Made in USA
- See more on Amazon...
First Available: 09/22/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 3.00 x 26.00 x 5.50 inches
Warranty: 1 Year Limited
See On Amazon #18
COMP Cams 69-400-8 High Energy 218/212 Hydraulic Roller Cam for Buick Grand National 231 V6
Asin: B001O0BY9G | Model: 69-400-8 | PartNumber: 69-400-8 | Ean: 0036584064008 | UPC: 036584064008
218/212 Duration At .050". 112 Degree Lobe Separation Angle..
Fits Buick 231 Grand National 6 Cylinder.
Made In Usa.
High Energy Grinds Are A Good Blend Of Efficiency And Performance: Ideal For Performance Street Rebuilds..
Works Well With Mainly Stock Components Such As Rockers, Manifolds, Heads, Compression, Torque Converters And Gears..
0.511"/0.504" Valve Lift.
1,500-6,200 Rpm Operating Range.
Features
- Performance upgrade for use with aftermarket turbo. Downpipe, intercooler preferred. Needs computer modifications or aftermarket computer.
- 1,500-6,200 RPM Operating Range
- 218/212 Duration at .050. 112 Degree Lobe Separation Angle.
- 0.511/0.504 Valve Lift
- High Energy grinds are a good blend of efficiency and performance: ideal for performance street rebuilds.
- Works well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
- Fits Buick 231 Grand National 6 Cylinder
- Made in USA
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 4.50 x 25.20 x 4.70 inches | Weight: 8.00 Pounds
See On Amazon #19
COMP Cams 08-433-8 Xtreme Energy 236/242 Hydraulic Roller Cam for OE Roller SBC
Asin: B000R9Z5NQ | Model: 08-433-8 | PartNumber: 08-433-8 | Ean: 0036584025054 | UPC: 036584025054
236/242 Duration At .050". 110 Degree Lobe Separation Angle.
Best Performance With Aftermarket Intake Manifolds, Headers And Lower Gear Ratios..
Fits Chevrolet Gen 1 305/350 Small Blocks Originally Equipped With Roller Camshafts..
Excellent Performance In Street Carbureted Applications. Quicker Opening Lobe Profiles Deliver Increased Responsiveness And More Area Under The Lift Curve..
More Vacuum Allows An Increase In Duration For Improved Performance And Assists Power Brakes..
.520"/.540" Valve Lift.
Fit Type: Vehicle Specific.
2,500-6,000 Rpm Operating Range.
Features
- Street/strip applications, 9:1+ compression, intake, headers, gears. 3000+ stall. Rough idle.
- 2,500-6,000 RPM Operating Range
- 236/242 Duration at .050. 110 Degree Lobe Separation Angle
- .520/.540 Valve Lift
- Excellent performance in street carbureted applications. Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Best performance with aftermarket intake manifolds, headers and lower gear ratios.
- Fits Chevrolet GEN 1 305/350 Small Blocks originally equipped with roller camshafts.
- fit type: Vehicle Specific
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.75 x 24.50 x 3.00 inches | Weight: 8.56 Pounds
See On Amazon #20
Comp Cams 15853-2 Short Travel Race Retro-Fit Hydraulic Roller Lifter for Small Block Chevy Engines with OE Flat Tappet Camshaft - Pair
Asin: B00975FA86 | Model: 15853-2 | PartNumber: 15853-2 | Ean: 0036584186649 | UPC: 036584186649
0.842 Inches Diameter; 152 Gram Weight; 2.66 Inches Seat Height.
Rem-Surfaced And Black Oxide To Reduce Valve Train Friction, Wear And Lubrication Temperatures.
Fit Type: Vehicle Specific.
Limits The Lifter’S Internal Piston Movement For Increased Durability & Performance At Higher Rpm.
0.005 Inches Recommended Preload.
Features
- For Small Block Chevy engines with OE flat tappet camshaft
- 0.005 inches recommended preload
- 0.842 inches diameter; 152 gram weight; 2.66 inches seat height
- Limits the lifter s internal piston movement for increased durability & performance at higher rpm
- REM-surfaced and black oxide to reduce valve train friction, wear and lubrication temperatures
- Fit type: Vehicle Specific
- See more on Amazon...
First Available: 09/07/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 0.70 x 5.40 x 4.00 inches | Weight: 0.66 pounds
Warranty: 1 Year Limited
See On Amazon
Looking For Something Else?
Search