Trans-Dapt 2137 Aluminum Carburetor Spacer
Asin: B000CQ6FFG | Model: 2137 | PartNumber: 2137 | Ean: 0086923021377, 0647367163247 | UPC: 647367163247, 086923021377
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Fit Type: Vehicle Specific.
Country Of Origin : United States.
Package Weight: 1.85 Pounds.
Features
- Package Dimensions: 3.81 H x 22.098 L x 18.288 W (centimetres)
- Package Weight: 1.85 pounds
- Fit type: Vehicle Specific
- Country of Origin : United States
- See more on Amazon...
Brand: Trans-Dapt Performance | Manufacturer: TRANSDAPT
Dimensions: 1.13 x 8.63 x 7.63 inches | Weight: 1.82 pounds
See On Amazon Similar To TransDapt 2137 Aluminum Carburetor Spacer
#1
Carburetor Spacer 2696 Edelbrock Carter Four-Hole Square-Bore to Spread-Bore Aluminum Carburetor Adapter for 1405 1406 Carb 4 BBL Quadrajet rebuild kit Thermo-Quad Base 0.85in,Individual Venturi Ports
Asin: B0BZSK8YTG | Model: 2696 | PartNumber: 2696 | Ean: 0747749037705 | UPC: 747749037705
【Fitment】 This Adapter Was Designed To Make A Square Bore Carburetor Fit A Factory Spread Bore Manifold. I'm Assuming Your Intake Manifold Is A Spread Bore Type. Edelbrock Carbs Are Square Bore In Design..
【Packge Include】1X Aluminum Adapter; 1X Lower Gasket (Intake To Adapter), 1X Upper Gasket (Adapter To Squarebore Carb), 4X Screws To Bolt Adapter To Intake ， 4X Studs And Nuts To Bolt Carb To Adapter ；Please Probably Use The Studs, Dont Over Tighten, Proper Design Works For Its Intended Application Without Vacuum Leaks..
【Advantage 】This Carburetor Adapter Plate Helpes With Increased Intake Manifold Pressure At Idle And Also Improves Horsepower And Torque Through The Entire Rpm Range And Responds Much Better Than 750 Ed Did It Could Be Used For Many Vehicles Update Such As Dodge, Chevy, Gm, Gmc, Ford Ect.
【Fitment】The Edelbrock Square-Bore Carb To Spread-Bore Manifold Adapter 2696 Is Designed To Allow Installation Of The Edelbrock Performer Series Carburetor On Vehicles With The Oem Spread-Bore Intake Manifold (Typically Gm Vehicles That Were Originally Equipped With The Rochester Quadra Jet Carburetor).It Could Also Be Used To Replace For Stock Q-Jets And T-Q Intakes.
Features
- Carb Spacer Specification Edelbrock 2696 adapter ; Square bore to Quadrajet and Thermo-Quad manifolds Adapter ; Mount Edelbrock Square-Bore Carbs to Stock Q-Jet & Thermo-Quad ; Size 0.850" Thick
- Fitment The Edelbrock Square-bore Carb to Spread-bore Manifold Adapter 2696 is designed to allow installation of the Edelbrock Performer Series carburetor on vehicles with the OEM spread-bore intake manifold (typically GM vehicles that were originally equipped with the Rochester Quadra jet carburetor).It could also be used to replace for stock Q-Jets and T-Q Intakes
- Fitment This Adapter was designed to make a square bore carburetor fit a factory spread bore manifold. I'm assuming your intake manifold is a spread bore type. Edelbrock carbs are square bore in design.
- Advantage This carburetor adapter plate helpes with increased intake manifold pressure at idle and also improves horsepower and torque through the entire rpm range and responds much better than 750 Ed did It could be used for many vehicles update such as Dodge, Chevy, GM, GMC, Ford Ect
- Packge Include 1x Aluminum Adapter; 1x lower gasket (intake to adapter), 1x upper gasket (adapter to squarebore carb), 4x screws to bolt adapter to intake 4x studs and nuts to bolt carb to adapter Please probably use the studs, Dont over tighten, Proper design works for its intended application without vacuum leaks.
- See more on Amazon...
Brand: liriuda | Manufacturer: liriuda auto parts
Warranty: 12 Months
See On Amazon #2
JEGS Carburetor Spacer | 4150 Square Bore Flange | Open Hole Design | 1 Tall | Includes Two Gaskets And Mounting Hardware
Asin: B01N2TVD54 | Ean: 0889944027652 | UPC: 889944027652
Open Hole Design Ideal For Single Plane But Will Work With Some Dual Plane Intake Manifolds.
Made From Aluminum For Weight Savings And Improved Insulation From Heat.
Includes Spacer, 2 Gaskets, And Mounting Hardware.
4150 Square Bore Mounting Flange For Holley, Edelbrock, Afb, Carter, Quick Fuel, Proform, And Other Carburetors And Throttle Bodies.
Features
- HEIGHT: 1 for street and racing applications
- 4150 SQUARE BORE MOUNTING FLANGE for Holley, Edelbrock, AFB, Carter, Quick Fuel, Proform, and other carburetors and throttle bodies
- OPEN HOLE DESIGN ideal for single plane but will work with some dual plane intake manifolds
- INCLUDES spacer, 2 gaskets, and mounting hardware
- MADE FROM ALUMINUM for weight savings and improved insulation from heat
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 1.50 x 6.30 x 6.70 inches | Weight: 2.00 pounds
See On Amazon #3
Edelbrock 8725 Carburetor Spacer
Asin: B00062Z30Y | Model: 8725 | PartNumber: 8725 | Ean: 0085347087259 | UPC: 085347087259
Measures 0. 5 In Thickness And Comes With A Natural Finish.
The Divided-Wall Design Increases The Air And Fuel Mixture Velocity.
Enhances Low Rpm Torque And Throttles Response.
Includes Heat-Insulating Phenolic Fiber.
Features
- Fits dual-plane intake manifolds
- Includes heat-insulating phenolic fiber
- Measures 0. 5 in thickness and comes with a natural finish
- Enhances low RPM torque and throttles response
- The divided-wall design increases the air and fuel mixture velocity
- See more on Amazon...
First Available: 06/05/2012
Brand: Edelbrock | Manufacturer: Edelbrock
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.68 Pounds
Warranty: 90 Day Manufacturer
See On Amazon #4
1" Aluminum Carburetor Spacer With 3/8" Vaccum Tube 1" Aluminum Open Carb Spacer Compatible With Chevy Ford Mopar
Asin: B0CJY5D8DY
Fits Holley 4150/4160, Edelbrock, Etc. Fits Chevy Ford Mopar.
Package Includes Complete As Pictured.Comes With Spacer,Bolts, Washers, Nuts, 3/8" Vacuum Tube & Plug If Needed..
Features
- 1" Total Height
- Package includes complete as pictured.Comes with spacer,bolts, washers, nuts, 3/8 vacuum tube & plug if needed.
- Fits Holley 4150/4160, Edelbrock, etc. Fits Chevy Ford Mopar
- See more on Amazon...
Brand: TAKPART | Manufacturer: TAKPART
See On Amazon #5
Spectre Performance 5769 2" Open Plastic Carb Spacer
Asin: B004AJ506Q | Model: 5769 | PartNumber: 5769 | Ean: 0089601576909 | UPC: 089601576909
Heat Insulating Phenolic.
Made From High Quality Material.
Gaskets/Hardware Included.
Features
- 2 In. open spacer
- Gaskets/hardware included
- Heat insulating phenolic
- Made from high quality material
- See more on Amazon...
First Available: 01/06/2014
Brand: Spectre | Manufacturer: Spectre
Dimensions: 4.00 x 9.00 x 8.00 inches
Warranty: 3 Months
See On Amazon #6
JEGS Holley Carburetor Spacer | Aluminum | 4150 Square Bore Flange | Open | 2 Tall | Includes Two Gaskets And Mounting Hardware
Asin: B06VVNR8X8 | Ean: 0889944027669 | UPC: 889944027669
Open Design For Single Or Dual Plane Intake Manifolds.
Made From Aluminum For Weight Savings And Improved Insulation From Heat.
Includes Spacer, 2 Gaskets, And Mounting Hardware.
4150 Square Bore Mounting Flange For Holley, Edelbrock, Afb, Carter, Quick Fuel, Proform, And Other Carburetors And Throttle Bodies.
Features
- HEIGHT: 2 for some street and most racing applications
- 4150 SQUARE BORE MOUNTING FLANGE for Holley, Edelbrock, AFB, Carter, Quick Fuel, Proform, and other carburetors and throttle bodies
- OPEN DESIGN for single or dual plane intake manifolds
- INCLUDES spacer, 2 gaskets, and mounting hardware
- MADE FROM ALUMINUM for weight savings and improved insulation from heat
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 2.30 x 6.90 x 6.70 inches | Weight: 2.00 pounds
See On Amazon #7
Edelbrock 8724 Carburetor Spacer
Asin: B00062Z3IQ | Model: 8724 | PartNumber: 8724 | Ean: 0085347087242 | UPC: 085347087242
High-Tech, 4-Hole Wood Carburetor Spacer Measures 0. 5 In Thickness.
Extends The Length Of The Intake Mixture Column To Improve Air And Fuel Distribution.
Enhances Low Rpm Torque And Throttle Response.
Insulates And Tunes Your Carburetor And Manifolds Power Band.
Features
- Includes heat-insulating phenolic fiber
- Insulates and tunes your carburetor and manifolds power band
- High-tech, 4-hole wood carburetor spacer measures 0. 5 in thickness
- Enhances low RPM torque and throttle response
- Extends the length of the intake mixture column to improve air and fuel distribution
- See more on Amazon...
Brand: Edelbrock | Manufacturer: Edelbrock
Dimensions: 1.20 x 8.60 x 7.80 inches | Weight: 0.75 Pounds
Warranty: 90 Day Manufacturer
See On Amazon #8
Mr. Gasket - 6005 Carb Spacer Open Center 1 In
Asin: B000BWCG3G | Model: 6005 | PartNumber: 6005 | Ean: 0084041060056, 0084829060056 | UPC: 084041060056, 084829060056
Includes Studs, Washers, Nuts And Gaskets.
Durable And Long Lasting.
Fit Type: Vehicle Specific.
Easy Installation.
Spacing The Carburetor Can Resolve Clearance Issues.
Features
- Improve Air/fuel Distribution For Added Power.Material:Aluminum
- Spacing The Carburetor Can Resolve Clearance Issues
- Includes studs, washers, nuts and gaskets
- Easy installation
- Durable and long lasting
- Fit type: Vehicle Specific
- See more on Amazon...
First Available: 10/28/2005
Brand: Mr. Gasket | Manufacturer: Mr Gasket
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.20 pounds
Warranty: Warranty
See On Amazon #9
Spectre Performance 5776 1" Open Carb Spacer with Tube
Asin: B0035GZSJ4 | Model: SPE-5776 | PartNumber: SPE-5776 | Ean: 0089601577609 | UPC: 089601577609
Increases Power By Raising Air/Fuel Velocity.
Gaskets And Hardware Included.
1 Inch Aluminum Open Spacer With Tube Precision Die Cast Aluminum.
Features
- For Holley, Edelbrock, Carter AFB carburetors
- 1 Inch aluminum open spacer with tube precision die cast aluminum
- Increases power by raising air/fuel velocity
- Gaskets and hardware included
- See more on Amazon...
First Available: 05/24/2013
Brand: Spectre | Manufacturer: Spectre
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
Warranty: 3 Months
See On Amazon #10
Trans-Dapt Performance 2370 Plastic Phenolic 4 Barrel Carb Spacer Ported 0.5 in. Incl. Gaskets/Studs/Nuts/Washers Plastic Phenolic 4 Barrel Carb Spacer
Asin: B001R1X5S0 | Model: 2370 | PartNumber: 2370 | Ean: 0086923023708 | UPC: 086923023708
2370.
Trans-Dapt Performance.
Features
- Trans-Dapt Performance Products 2370 Plastic Phenolic 4 Barrel Carb Spacer; Ported; 0.5 in.; Incl. Gaskets/Studs/Nuts/Washers;
- Trans-Dapt Performance
- 2370
- See more on Amazon...
Brand: Trans-Dapt Performance | Manufacturer: TRANSDAPT
Dimensions: 0.63 x 7.63 x 8.63 inches | Weight: 1.26 Pounds
See On Amazon #11
Trans-Dapt Performance 2136 Aluminum Carburetor Spacer
Asin: B000CQ20NC | Model: 2136 | PartNumber: 2136 | Ean: 0086923021360 | UPC: 086923021360
For Use On Holley 350-500-650 Cfm 2-Bbl Carburetors..
0.5" Thick.
Holley 2Bbl Spacer.
Features
- 1/2" Tall
- HOLLEY 2BBL SPACER
- For use on Holley 350-500-650 cfm 2-bbl carburetors.
- 0.5 Thick
- See more on Amazon...
Brand: Trans-Dapt Performance | Manufacturer: SPACER
Dimensions: 0.63 x 8.63 x 7.63 inches | Weight: 0.00 pounds
Warranty: LIMITED WARRANTY
See On Amazon #12
Trans-Dapt 2584 Phenolic Carburetor Spacer
Asin: B000CQ20UU | Model: 2584 | PartNumber: 2584 | Ean: 0086923025849 | UPC: 086923025849
Item Model Number: 2588.
Country Of Origin: Taiwan, Province Of China.
Product Dimensions 8.63 X 7.63 X 1 Inches.
Features
- Item Weight: 1.6 ounces
- Product Dimensions 8.63 x 7.63 x 1 inches
- Item model number: 2588
- Country of Origin: Taiwan, Province of China
- See more on Amazon...
Brand: Trans-Dapt Performance | Manufacturer: TRANSDAPT
Dimensions: 1.00 x 8.63 x 7.63 inches | Weight: 0.10 Pounds
See On Amazon #13
Trans-Dapt 2533 Swirltorque Tbi Spacer Gm
Asin: B000CPZW7E | Model: 2533 | PartNumber: 2533 | Ean: 0086923025337 | UPC: 086923025337
Country Of Origin :United States.
Package Weight :1.6Lbs.
Package Dimensions :23.368 Cm L X 12.953 Cm W X 4.064 Cm H.
Features
- Product Type :Auto Part
- Package Dimensions :23.368 Cm L X 12.953 Cm W X 4.064 Cm H
- Country Of Origin :United States
- Package Weight :1.6Lbs
- See more on Amazon...
Brand: Trans-Dapt Performance | Manufacturer: TRANSDAPT
Dimensions: 2.00 x 8.25 x 5.50 inches | Weight: 1.00 pounds
See On Amazon #14
Spectre Performance 5764 Universal 4-Hole/Open Carburetor Spacer
Asin: B0008F68BM | Model: SPE-5764 | PartNumber: SPE-5764 | Ean: 0089601576404 | UPC: 089601576404
Gaskets And Hardware Included.
Easy To Install.
1 Inch Thick To Help Increase Air/Fuel Velocity.
Features
- Universal open and 4 hole spacer for Holley, Edelbrock or AFB carburetors
- 1 inch thick to help increase air/fuel velocity
- Gaskets and hardware included
- Easy to install
- See more on Amazon...
First Available: 01/06/2014
Brand: Spectre | Manufacturer: Spectre
Dimensions: 2.30 x 7.90 x 7.00 inches | Weight: 2.00 pounds
Warranty: 3 Months
See On Amazon #15
Trans-Dapt 2086 Carburetor Adapter
Asin: B000CQ20M8 | Model: 2086 | PartNumber: 2086 | Ean: 0647367163278, 0086923020868 | UPC: 647367163278, 086923020868
Package Weight: 1.0 Pounds.
Fit Type: Vehicle Specific.
Country Of Origin: Taiwan, Province Of China.
Features
- Package Dimension : 21.843 centimeters L x 18.288 centimeters W x 4.318 centimeters H
- Country of Origin: TAIWAN, PROVINCE OF CHINA
- Package Weight: 1.0 pounds
- Fit type: Vehicle Specific
- See more on Amazon...
Brand: Trans-Dapt Performance | Manufacturer: TRANSDAPT
Dimensions: 0.50 x 8.63 x 7.63 inches | Weight: 0.88 pounds
See On Amazon #16
JEGS Phenolic Carburetor Spacer | 4150 Square Bore Flange | Open Style | 2 Tall | Includes Two Gaskets And Mounting Hardware
Asin: B078WHWQ3Z | Ean: 0889944027836 | UPC: 889944027836
Open Style For Single Plane Intake Manifolds.
Made From Phenolic Plastic For Weight Savings And Improved Insulation From Heat.
Includes Spacer, 2 Gaskets, And Mounting Hardware.
4150 Square Bore Mounting Flange For Holley, Edelbrock, Afb, Carter, Quick Fuel, Proform, And Other Carburetors And Throttle Bodies.
Features
- HEIGHT: 2 for racing applications, raises RPM band, improves top-end performance
- 4150 SQUARE BORE MOUNTING FLANGE for Holley, Edelbrock, AFB, Carter, Quick Fuel, Proform, and other carburetors and throttle bodies
- OPEN STYLE for single plane intake manifolds
- INCLUDES spacer, 2 gaskets, and mounting hardware
- MADE FROM PHENOLIC PLASTIC for weight savings and improved insulation from heat
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 2.70 x 7.40 x 7.40 inches | Weight: 2.00 pounds
See On Amazon #17
TRANSDAPT Trans-Dapt 2517 Ford 4.6L FI Spacer 97-99
Asin: B000N8FFBS | Model: 2517 | PartNumber: 2517 | Ean: 0086923025177 | UPC: 086923025177
Item Package Weight:0.495 Kg.
Country Of Origin: United States.
Item Package Dimension:3.8 Cm L X 12.8 Cm W X 23.6 Cm H.
Features
- Product Type:Speakers
- Item Package Dimension:3.8 cm L X 12.8 cm W X 23.6 cm H
- Item Package Weight:0.495 kg
- Country Of Origin: United States
- See more on Amazon...
First Available: 05/04/2007
Brand: Trans-Dapt Performance | Manufacturer: TRANSDAPT
Dimensions: 2.00 x 8.20 x 5.20 inches | Weight: 1.35 Pounds
See On Amazon #18
Spectre Performance 5765 Universal 4-Barrel Carburetor Adapter
Asin: B00062ZD9A | Model: SPE-5765 | PartNumber: SPE-5765 | Ean: 0089601576503 | UPC: 089601576503
Precision Die Cast Aluminum Outer Plate.
Gaskets And Hardware Included.
Heat Insulating Phenolic Center.
Features
- Adapts Holley, Edelbrock, Carter AFB 4 barrel carburetors to a Quadrajet intake manifold
- Heat insulating phenolic center
- Precision die cast aluminum outer plate
- Gaskets and hardware included
- See more on Amazon...
First Available: 01/06/2014
Brand: Spectre | Manufacturer: Spectre
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
Warranty: 3 Months
See On Amazon #19
Trans-Dapt Performance CARB ADAPTER -2044
Asin: B000CQ20KK | Model: 2044 | PartNumber: 2044 | Ean: 0086923020448 | UPC: 086923020448
Fit Type: Vehicle Specific.
Country Of Origin : United States.
Package Weight: 1.55 Pounds.
Features
- Package Dimensions: 4.572 H x 22.606 L x 20.32 W (centimetres).Material:Cast Aluminum
- Package Weight: 1.55 pounds
- Fit type: Vehicle Specific
- Country of Origin : United States
- See more on Amazon...
Brand: Trans-Dapt Performance | Manufacturer: CARB ADAPTER
Dimensions: 1.75 x 8.63 x 7.63 inches | Weight: 1.52 pounds
Warranty: LIMITED WARRANTY
See On Amazon
Looking For Something Else?
Search