SKF 99147 Speedi Sleeve, Inch, 1.417in Shaft Diameter, 0.512in Width
Asin: B000EPVWIU | Model: 99147 | PartNumber: 99147 | Ean: 0085311041379 | UPC: 085311041379
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional."Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 inches | Weight: 0.02 Pounds
See On Amazon Similar To SKF 99147 Speedi Sleeve Inch
#1
SKF 99187 Speedi Sleeve and Tool Kit, Inch, 1.872in Shaft Diameter, 0.563in Width
Asin: B000EPOHW8 | Model: 99187 | PartNumber: 99187 | Ean: 0085311041645 | UPC: 085311041645
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 inches
See On Amazon #2
SKF 99150 Speedi Sleeve and Tool Kit, Inch, 1.5in Shaft Diameter, 0.375in Width
Asin: B00CLINYO8 | Model: 99150 | PartNumber: 99150 | Ean: 0085311041393 | UPC: 085311041393
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 Inches
See On Amazon #3
SKF 99155 Speedi-Sleeves
Asin: B000EPOHUK | Model: 99155 | PartNumber: 99155 | Ean: 0085311041409, 0085311041416 | UPC: 085311041416, 085311041409
Country Of Origin :United States.
Package Quantity :1.
Package Dimensions :4.25" L X4.25" W X1.75" H.
Features
- Product Type :Auto Part
- Package Dimensions :4.25 L X4.25 W X1.75 H
- Country Of Origin :United States
- Package Quantity :1
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 inches
Warranty: One Year Warranty
See On Amazon #4
SKF 99193 Speedi Sleeve and Tool Kit, Inch, 1.937in Shaft Diameter, 0.563in Width
Asin: B000EPR7GQ | Model: 99193 | PartNumber: 99193 | Ean: 0085311041690 | UPC: 085311041690
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 inches | Weight: 0.05 pounds
See On Amazon #5
SKF 99266 Speedi Sleeve and Tool Kit, Inch, 2.677in Shaft Diameter, 0.75in Width
Asin: B000C07P0Q | Model: 99266 | PartNumber: 99266 | Ean: 0085311902694 | UPC: 085311902694
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 1.75 x 4.25 x 4.25 inches
Warranty: One Year Warranty
See On Amazon #6
SKF 99139 Speedi-Sleeves
Asin: B000EPTAOS | Model: 99139 | PartNumber: 99139
Country Of Origin: United States.
Package Weight: 0.022 Pounds.
Precision Ground Stainless Steel Sleeve For Tough Seal Surface, Fast Shaft Repair.
Features
- Package Dimension : 11.176 cms L x 10.668 cms W x 2.54 cms H
- Precision ground stainless steel sleeve for tough seal surface, fast shaft repair
- Country of Origin: UNITED STATES
- Package Weight: 0.022 pounds
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 1.75 x 4.25 x 4.25 inches | Weight: 0.11 pounds
Warranty: One Year Warranty
See On Amazon #7
SKF 99192 Speedi Sleeve, Inch, 1.912in Shaft Diameter, 0.375in Width
Asin: B00460H03A | Model: 99192 | PartNumber: 99192 | Ean: 0085311041683 | UPC: 085311041683
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 3.94 x 9.84 x 0.91 inches
See On Amazon #8
SKF 99177 Speedi Sleeve and Tool Kit, Inch, 1.772in Shaft Diameter, 0.551in Width
Asin: B000EPTAPC | Model: 99177 | PartNumber: 99177 | Ean: 0085311041577 | UPC: 085311041577
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 inches | Weight: 0.14 pounds
Warranty: One Year Warranty
See On Amazon #9
SKF 99125 Speedi Sleeve and Tool Kit, Inch, 1.25in Shaft Diameter, 313in Width
Asin: B000EPR7E8 | Model: 99128 | PartNumber: 99128 | Ean: 0085311041263 | UPC: 085311041263
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 Inches | Weight: 0.02 pounds
Warranty: One Year Warranty
See On Amazon #10
SKF 99289 Speedi Sleeve, Inch, 2.953in Shaft Diameter, 0.594in Width
Asin: B00460KT6U | Model: 99289 | PartNumber: 99289 | Ean: 0085311042192 | UPC: 085311042192
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 3.94 x 9.84 x 0.91 inches
See On Amazon
Looking For Something Else?
Search