OTC 7074A Heavy-Duty Truck Clutch Alignment Tool - 10-Spline, 2" OD, 1-1/4" Pilot
Asin: B000F5LJDW | Model: 7074A | PartNumber: 7074A | Ean: 0731413005213, 0777780885379 | UPC: 777780885379, 731413005213
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Rugged Construction Will Easily Support The Weight Of Heavy Clutch Discs.
2 Inch O.D. Shaft, 1-1/4 Inch Pilot, 10 Splines, Splines Are 3.6 Inches Long; Similar To Ford 308-D003 (D79t-7550-C).
To Use, Loosely Install Clutch Disc And Pressure Plate On Flywheel Then Insert Alignment Tool Through The Clutch Into The Bearing, Center Disc, Then Tighten Pressure Plate To Spec.
Tool Is Constructed Of Lightweight Fiberglass-Reinforced Nylon That Won't Hang Up In Clutch Disc Splines.
Features
- OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches
- Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines
- Rugged construction will easily support the weight of heavy clutch discs
- To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec
- 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long; similar to Ford 308-D003 (D79T-7550-C)
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 0.60 x 18.60 x 3.80 inches | Weight: 0.70 pounds
Warranty: Limited lifetime warranty
See On Amazon Similar To OTC 7074A HeavyDuty Truck Clutch
#1
OTC 7480 Heavy-Duty Truck Clutch Alignment Tool - 10-Spline, 1-3/4" OD, 1" Pilot
Asin: B0029XLPVE | Model: 7480 | PartNumber: 7480 | Ean: 0731413004674, 0777780883900 | UPC: 731413004674, 777780883900
Rugged Construction Will Easily Support The Weight Of Heavy Clutch Discs.
1-3/4 Inch O.D. Shaft, 1 Inch Pilot, 10 Splines; Similar To Ford 308-D010 (D93t-7550-A).
To Use, Loosely Install Clutch Disc And Pressure Plate On Flywheel Then Insert Alignment Tool Through The Clutch Into The Bearing, Center Disc, Then Tighten Pressure Plate To Spec.
Tool Is Constructed Of Lightweight Fiberglass-Reinforced Nylon That Won't Hang Up In Clutch Disc Splines.
Features
- OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches
- Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines
- Rugged construction will easily support the weight of heavy clutch discs
- To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec
- 1-3/4 inch O.D. shaft, 1 inch pilot, 10 splines; similar to Ford 308-D010 (D93T-7550-A)
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 1.20 x 18.70 x 3.00 inches | Weight: 0.55 Pounds
Warranty: Limited lifetime warranty
See On Amazon #2
OTC 7471A Engine Barring Socket for Cummins Applications
Asin: B00063YWUK | Model: 7471A | PartNumber: 7471A | Ean: 0731413028588, 7294104673472, 7262318293144 | UPC: 731413028588
Tool Features A Load-Bearing Collar That Provides Friction-Free Operation While Rotating The Tool In The Housing.
To Use: Simply Insert Tool Into The Flywheel Housing Until It Engages The Ring Gear, Then Attach A 1/2 Inch Square Drive Ratchet Or Breaker Bar And Turn.
Durable Steel Tool Engages Engine And Allows It To Be Rotated For Injector Work, Valve Lash Adjustments, And More.
For Use On Cummins B And C Series Diesel Engines And 5.9L Liter Diesels Used In Dodge Pickups.
Features
- OTC Engine Barring Splined Male Socket for manual engine rotation
- For use on Cummins B and C series diesel engines and 5.9L liter diesels used in Dodge pickups
- Tool features a load-bearing collar that provides friction-free operation while rotating the tool in the housing
- Durable steel tool engages engine and allows it to be rotated for injector work, valve lash adjustments, and more
- To use: simply insert tool into the flywheel housing until it engages the ring gear, then attach a 1/2 inch square drive ratchet or breaker bar and turn
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.70 x 4.80 x 4.50 Inches | Weight: 0.00 Pounds
See On Amazon #3
OTC Tools 7221 Flywheel Holder
Asin: B01A8Q4FV0 | Model: 7221 | PartNumber: 7221 | Ean: 0731413582677 | UPC: 731413582677
Similar To J-44643.
Fits Gm 6.6L Duramax Diesel, 2001 To Present.
Features
- Holds the flywheel in a locked position for servicing
- Fits GM 6.6L Duramax Diesel, 2001 to present
- Similar to J-44643
- See more on Amazon...
First Available: 01/06/2016
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 0.10 x 6.50 x 0.10 inches | Weight: 1.30 Pounds
See On Amazon #4
OTC 7073A Heavy-Duty Truck Clutch Alignment Tool - 10-Spline, 1-3/4" OD, 1-1/4" Pilot
Asin: B00063YIKO | Model: 7073A | PartNumber: 7073A | Ean: 0731413005206 | UPC: 731413005206
Rugged Construction Will Easily Support The Weight Of Heavy Clutch Discs.
1-3/4 Inch O.D. Shaft, 1-1/4 Inch Pilot, 10 Splines, Splines Are 3.75 Inches Long; Similar To Ford 308-D002 (D79t-7550-B).
To Use, Loosely Install Clutch Disc And Pressure Plate On Flywheel Then Insert Alignment Tool Through The Clutch Into The Bearing, Center Disc, Then Tighten Pressure Plate To Spec.
Tool Is Constructed Of Lightweight Fiberglass-Reinforced Nylon That Won't Hang Up In Clutch Disc Splines.
Features
- OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches
- Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines
- Rugged construction will easily support the weight of heavy clutch discs
- To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec
- 1-3/4 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.75 inches long; similar to Ford 308-D002 (D79T-7550-B)
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 1.00 x 18.60 x 4.11 inches | Weight: 0.70 pounds
Warranty: Limited lifetime warranty
See On Amazon #5
OTC 5072 Lucas Girling Rear Brake Adjusting Tool - Ford F700, F800, F900
Asin: B000F5LISS | Model: 5072 | PartNumber: 5072 | Ean: 0731413027093 | UPC: 731413027093
Lucas Girling Brakes Are Popular On Ford F700, F800, And F900 Series Trucks.
Lifetime Limited Warranty.
High-Grade Materials Ensure Quality Performance Over The Lifetime Of The Tool.
Tool's Offset Design And Extra Handle Length Gets The Job Done Quickly.
Features
- OTC's Lucas Girling Rear Brake Adjusting Tool enables you to easily adjust rear Lucas Girling hydraulic brake systems
- Tool's offset design and extra handle length gets the job done quickly
- Lucas Girling brakes are popular on Ford F700, F800, and F900 series trucks
- High-grade materials ensure quality performance over the lifetime of the tool
- Lifetime limited warranty
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.30 x 18.00 x 6.00 inches | Weight: 0.80 pounds
Warranty: Limited lifetime warranty
See On Amazon #6
OTC Tools 5190A Heavy Duty U-Joint Puller for Use on Class 7 and 8 Trucks
Asin: B00UF4L9BU | Model: 5190A | PartNumber: 5190A | Ean: 0731413577536 | UPC: 731413577536
Smooth, Crisp Threads Allows For A Lower, More Consistent Effort To Rotate Shaft; Will Not Damage The Driveshaft, Yoke, Bearing Cups, Or Joints.
Fits Spicer Driveline 1610, 1710, 1760, 1810, 1880; Spicer Spl 140, 170, And 250 'Life Series'; Meritor (Rockwell) 16N, 17N, 18N, 1710; Meritor Rpl 20 And 25 'Permalube' Series.
Major Tool Components Are Heat Treated For Improved Strength And Durability, Ensuring A Long, Productive Service Life.
Large Diameter Threaded Shaft Can Handle U-Joints That Are Severly Seized Due To Corrosion And Require More Force To Disassemble.
Features
- Ideal tool for removing Heavy-Duty driveline U-Joints on Class 7 and 8 Trucks in conjunction with up to a 1 inch impact wrench (not included) - without the need for heat or hammering
- Large diameter threaded shaft can handle U-joints that are severly seized due to corrosion and require more force to disassemble
- Smooth, crisp threads allows for a lower, more consistent effort to rotate shaft; will not damage the driveshaft, yoke, bearing cups, or joints
- Major tool components are heat treated for improved strength and durability, ensuring a long, productive service life
- Fits Spicer driveline 1610, 1710, 1760, 1810, 1880; Spicer SPL 140, 170, and 250 'Life Series'; Meritor (Rockwell) 16N, 17N, 18N, 1710; Meritor RPL 20 and 25 'Permalube' series
- See more on Amazon...
First Available: 06/06/2015
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 5.00 x 12.00 x 9.00 inches | Weight: 11.40 pounds
Warranty: 1 year manufacturer
See On Amazon #7
OTC 7421 54" Jimmy Bar
Asin: B000P72CR2 | Model: 7421 | PartNumber: 7421 | Ean: 0069060273670, 0031113145982, 0731413010750, 0071020267766 | UPC: 731413010750, 031113145982, 071020267766, 069060273670
1 Inch Diameter.
Heat-Treated To Resist Bending And Breaking.
Forged From Chrome Alloy Steel.
54 Inches In Length.
Features
- OTC Jimmy Bars are versatile tools with a multitude of uses, from prying to aligning - flattened on one end, tapered to a point on the other
- 54 inches in length
- 1 inch diameter
- Forged from chrome alloy steel
- Heat-treated to resist bending and breaking
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 4.00 x 59.00 x 1.50 inches | Weight: 1.93 Pounds
See On Amazon #8
OTC 6574 Universal Heavy Duty Hub Puller
Asin: B005MVB3MG | Model: 6574 | PartNumber: 6574 | Ean: 0731413560361 | UPC: 731413560361
Forged Puller Assembly With 1 Inch Drive Screw.
Additional Legs Can Be Added To Center Hub For Special Applications.
Recommended For Use With Impact Gun And/Or Striking With A Hammer.
Wide Range Of 4 Inch To 8 Inch + Bolt Circle.
Features
- Adjustable sliding legs can be positioned anywhere on center hub
- Wide range of 4 inch to 8 inch + bolt circle
- Forged puller assembly with 1 inch drive screw
- Recommended for use with impact gun and/or striking with a hammer
- Additional legs can be added to center hub for special applications
- See more on Amazon...
First Available: 01/30/2013
Brand: OTC | Manufacturer: OTC
Dimensions: 2.00 x 12.00 x 12.00 inches | Weight: 13.00 Pounds
Warranty: Lifetime Limited Warranty
See On Amazon #9
OTC 5018A Low Clearance Truck Clutch and Flywheel Handler
Asin: B0041DF9BW | Model: 5018A | PartNumber: 5018A | Ean: 0731413543845 | UPC: 731413543845
Minimum Height Of 15 Inches Allows Access Below Side Faring; When Raised, Center Line Of Clutch Will Be 38-1/4 Inches Off The Floor.
Overall Footprint Is 32-3/8 Inches Long By 24-1/2 Inches Wide.
Unit Features An Open Stance, For Ease Of Access To The Work, And A 360 Degree Swivel Head.
Handles 14 Inch And 15-1/2 Inch Clutch Assemblies Weighing Up To 250 Lbs; Swivel Casters Provide Easy Maneuverability; Includes A 2 Inch Splined Shaft With A 1-1/4 Inch Pilot To Aid In Alignment.
Features
- OTC's Truck Clutch & Flywheel Handler features a unique linkage design that raises the load from horizontal to vertical as the pump is cycled - eliminating any lifting of the clutch by the operator
- Handles 14 inch and 15-1/2 inch clutch assemblies weighing up to 250 lbs; swivel casters provide easy maneuverability; includes a 2 inch splined shaft with a 1-1/4 inch pilot to aid in alignment
- Minimum height of 15 inches allows access below side faring; when raised, center line of clutch will be 38-1/4 inches off the floor
- Unit features an open stance, for ease of access to the work, and a 360 degree swivel head
- Overall footprint is 32-3/8 inches long by 24-1/2 inches wide
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 12.00 x 45.00 x 26.50 inches | Weight: 125.00 Pounds
Warranty: Limited lifetime warranty
See On Amazon #10
OTC 7069A Heavy-Duty Brake Spring Pliers for Trucks, Buses, Trailers, and More
Asin: B000I1OVMO | Model: 7069A | PartNumber: 7069A | Ean: 0731413009846 | UPC: 731413009846
Generous 26-1/4 Inch Length Gives You The Leverage To Do The Job More Easily.
Tip Is Replaceable In Case Of Damage Or Loss.
Huge Jaw Opening Accommodates Even The Widest Brake Shoes.
Specially Designed Pliers Works For Hydraulic Wedge-Type And S-Cam Air Brakes.
Features
- OTC's Heavy-Duty Brake Spring Pliers save time and effort when removing and installing return springs on the brake shoes of heavy-duty vehicles
- Specially designed pliers works for hydraulic wedge-type and S-cam air brakes
- Generous 26-1/4 inch length gives you the leverage to do the job more easily
- Huge jaw opening accommodates even the widest brake shoes
- Tip is replaceable in case of damage or loss
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 0.90 x 28.00 x 5.10 inches | Weight: 4.80 Pounds
Warranty: 1 year manufacturer
See On Amazon #11
OTC 7317A Disc Park Brake Caliper Tool Kit
Asin: B0002SQUJK | Model: 7317A | PartNumber: 7317A | Ean: 0731413037108 | UPC: 731413037108
Country Of Manufacture: Taiwan.
Part Number: 7317A.
Auto & Truck Maintenance.
Features
- Manufacturer: OTC
- Auto & Truck Maintenance
- Country of manufacture: Taiwan
- Part number: 7317A
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 9.20 x 11.90 x 2.40 Inches | Weight: 4.00 pounds
Warranty: 1 year manufacturer
See On Amazon #12
OTC 5029 Heavy-Duty Truck Clutch Alignment Tool - 10-Spline, 2" OD, 1-1/4" Pilot
Asin: B00124LEXU | Model: 5029 | PartNumber: 5029 | Ean: 0731413009655 | UPC: 731413009655
Rugged Construction Will Easily Support The Weight Of Heavy Clutch Discs.
2 Inch O.D. Shaft, 1-1/4 Inch Pilot, 10 Splines, Splines Are 7.3 Inches Long; Similar To Ford 308-D011 (D93t-7550-B).
To Use, Loosely Install Clutch Disc And Pressure Plate On Flywheel Then Insert Alignment Tool Through The Clutch Into The Bearing, Center Disc, Then Tighten Pressure Plate To Spec.
Tool Is Constructed Of Lightweight Fiberglass-Reinforced Nylon That Won't Hang Up In Clutch Disc Splines.
Features
- OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches
- Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines
- Rugged construction will easily support the weight of heavy clutch discs
- To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec
- 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 7.3 inches long; similar to Ford 308-D011 (D93T-7550-B)
- See more on Amazon...
First Available: 08/25/2011
Brand: OTC | Manufacturer: OTC
Dimensions: 2.30 x 19.00 x 4.20 inches | Weight: 1.00 Pounds
Warranty: Limited Lifetime Warranty
See On Amazon #13
OTC 1038 7-Ton 'Grip-O-Matic' Puller - Long 2/3 Jaw (Mechanical)
Asin: B00063WVUI | Model: 1038 | PartNumber: 1038 | Ean: 0705554411035, 0731413010385 | UPC: 705554411035, 731413010385
Maximum Reach - 8-3/4 Inches; Maximum Spread - 11 Inches.
Center Screw Size - 11/16-18 X 9 Inches Long.
Jaw Thickness - 11/32 Inch; Jaw Width - 1 Inch.
Forged From Quality Steel, Heat Treated, And Subjected To Rigorous Tests Which Exceed The Rated Capacity.
Features
- OTC's 7-ton capacity, long 2/3-jaw, gear and bearing puller is easily configurable as either a 2 or 3 jaw puller enabling you to remove and install a wider variety of parts for fast, effective repairs
- Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
- Maximum reach - 8-3/4 inches; maximum spread - 11 inches
- Jaw thickness - 11/32 inch; jaw width - 1 inch
- Center screw size - 11/16-18 x 9 inches long
- See more on Amazon...
Brand: OTC | Manufacturer: Otc
Dimensions: 1.90 x 13.30 x 5.50 Inches | Weight: 0.30 Pounds
Warranty: Lifetime warranty does not cover abuse
See On Amazon #14
OTC 7024 Automatic Transmission Clutch Spring Compressor
Asin: B000HI2ZJY | Model: 7024 | PartNumber: 7024 | Ean: 0731413004445 | UPC: 731413004445
For Use On Most American Cars And Light Trucks.
It Applies Pressure To The Clutch Drum’S Retaining Washer To Compress Piston Return Springs.
Features
- This is a handy adjustable tool for removing or installing the snap ring on a transmission rear clutch piston
- It applies pressure to the clutch drum s retaining washer to compress piston return springs
- For use on most American cars and light trucks
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.30 x 12.10 x 7.40 inches | Weight: 2.95 Pounds
Warranty: 1 year manufacturer
See On Amazon #15
OTC 7196 Crank and Cam Seal Service Kit
Asin: B00AQJXKLQ | Model: 7196 | PartNumber: 7196 | Ean: 0731413562952 | UPC: 731413562952
The Interchangeable Seal Install Adapters Are Designed For Use With The Cam Or Crank Bolt.
Rugged Blow Molded Plastic Storage Case Keeps Tools Contained And Organized So They Are Ready When You Need Them.
Kit Services Seal Sizes Of 21.5Mm To 64Mm.
Includes A Puller Coupled With Specialized Puller Legs That Hook The Seal For Quick And Easy Removal.
Features
- OTC's Crank & Cam Seal Service Set removes and installs camshaft and crankshaft seals on cars, trucks, vans, and SUV's without damage
- Includes a puller coupled with specialized puller legs that hook the seal for quick and easy removal
- The interchangeable seal install adapters are designed for use with the cam or crank bolt
- Kit services seal sizes of 21.5mm to 64mm
- Rugged blow molded plastic storage case keeps tools contained and organized so they are ready when you need them
- See more on Amazon...
First Available: 01/22/2013
Brand: OTC | Manufacturer: OTC
Dimensions: 2.00 x 17.50 x 8.00 Inches | Weight: 0.00 pounds
Warranty: Lifetime Limited Warranty
See On Amazon #16
OTC 7379 Accutorq Clikker Torque Wrench - 100-600 ft. lbs.
Asin: B000I1Y3TK | Model: 7379 | PartNumber: 7379 | Ean: 0731413010675 | UPC: 731413010675
Accutorq Wrenches Are Made From High-Quality Corrosion Proofed, Heat-Treated Steel And Finished With A Tough, Durable Chromium-Nickel Plating; Hand Grip Is Impervious To Gasoline, Oil, And Kerosene.
Sturdy Blow-Molded Hard Case Keeps Wrench Protected And Secure When Not In Use.
Torque Range - 100-600 Foot-Pounds (136-8123 N*M); 10 Foot-Pound Graduations; 3/4 Inch Square Drive; 42-1/4 Inch Overall Length.
Wrench Features A Ratcheting Head, All-Metal Construction, Permanently Roll-Marked Scales, And Soft-Grip Rubber Handles That Enable You To Firmly Grasp The Wrench For Right Or Left Hand Torqueing.
Features
- OTC's Accutorq Clikker Torque Wrenches make a loud click when you've reached the torque setting preventing under or over torquing
- Wrench features a ratcheting head, all-metal construction, permanently roll-marked scales, and soft-grip rubber handles that enable you to firmly grasp the wrench for right or left hand torqueing
- Accutorq wrenches are made from high-quality corrosion proofed, heat-treated steel and finished with a tough, durable chromium-nickel plating; hand grip is impervious to gasoline, oil, and kerosene
- Torque range - 100-600 foot-pounds (136-8123 N*m); 10 foot-pound graduations; 3/4 inch square drive; 42-1/4 inch overall length
- Sturdy blow-molded hard case keeps wrench protected and secure when not in use
- See more on Amazon...
First Available: 08/25/2011
Brand: OTC | Manufacturer: OTC
Dimensions: 3.75 x 45.75 x 4.25 inches | Weight: 15.00 Pounds
Warranty: One Year Limited Warranty
See On Amazon #17
OTC 5015A Truck Clutch and Flywheel Handler
Asin: B003D5ESVQ | Model: 5015A | PartNumber: 5015A | Ean: 0731413546006 | UPC: 731413546006
Swivel Casters And A 9 Inch To 37 Inch Lifting Range Provide Supreme Manueverability During Installation - Allowing Precise Alignment Of The Clutch Assembly To The Back Of The Engine.
Wide Footprint Provides Stability; High-Grade Materials Ensure Quality Performance Over The Lifetime Of The Tool.
Includes A 2 Inch Splined Shaft With A 1-1/4 Inch Pilot To Aid In Alignment.
Handles 14 Inch And 15-1/2 Inch Clutch Assemblies Weighing Up To 150 Lbs.
Features
- OTC's Truck Clutch & Flywheel Handler turns clutch replacement from a back breaker to a simple one person job
- Handles 14 inch and 15-1/2 inch clutch assemblies weighing up to 150 lbs
- Swivel casters and a 9 inch to 37 inch lifting range provide supreme manueverability during installation - allowing precise alignment of the clutch assembly to the back of the engine
- Includes a 2 inch splined shaft with a 1-1/4 inch pilot to aid in alignment
- Wide footprint provides stability; high-grade materials ensure quality performance over the lifetime of the tool
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 14.00 x 34.00 x 14.00 inches | Weight: 121.00 pounds
Warranty: Limited lifetime warranty
See On Amazon #18
OTC 4537 A/C Clutch Holding Tool
Asin: B00063VF1E | Model: 4537 | PartNumber: 4537 | Ean: 0731413039300 | UPC: 731413039300
Fist Various Styles Of A/C Compressors Used On Gm Ford And Chrysler Vehicles.
Also Fits A Variety Of Other Pulleys.
Adjusts Quickly With Brass Thumbscrews.
Features
- Three-stud spanner wrench keeps the A/C clutch from turning when loosening or tightening the retaining nut
- Adjusts quickly with brass thumbscrews
- Fist various styles of A/C compressors used on GM Ford and Chrysler vehicles
- Also fits a variety of other pulleys
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 0.60 x 5.80 x 12.20 inches | Weight: 0.00 pounds
Warranty: Limited lifetime warranty
See On Amazon #19
OTC 7491C Upper Control Arm Knock-out Tool
Asin: B000F5JMCC | Model: 7491C | PartNumber: 7491C | Ean: 0731413037085 | UPC: 731413037085
Services 1989-2001 Chevrolet And Gmc 1/2 3/4 And 1-Ton 2 And 4 Wheel Drive Trucks And 1990-2002 All-Wheel Drive Chevrolet Astro And Gmc Safari Vans.
New And Improved Design Has A Self-Centering Knock-Out For Full Punch Removal With Less Tear.
Features
- Removes the inserts on upper control arm alignment brackets
- New and improved design has a self-centering knock-out for full punch removal with less tear
- Services 1989-2001 Chevrolet and GMC 1/2 3/4 and 1-ton 2 and 4 wheel drive trucks and 1990-2002 all-wheel drive Chevrolet Astro and GMC Safari vans
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 1.60 x 7.80 x 4.50 inches | Weight: 0.70 pounds
Warranty: 1 year manufacturer
See On Amazon
Looking For Something Else?
Search