PSI Woodworking LCPM3 Lathe Penturning HSS Chisel Set, 3-Pieces
Asin: B000KIAE2Q | Model: LCPM3 | PartNumber: LCPM3 | Ean: 0733353486664, 7241870675421, 5272003689123, 0785533980103, 0689076541398, 7566908042021 | UPC: 689076541398, 733353486664, 785533980103
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3/8-Inch Gouge For Rough Cutting.
1/2-Inch Oval Skew For Smooth Cuts And Finished Surfaces.
1/8-Inch Parting Tool For Cutting Tennons, And Parting-Off.
Comes In An Attractive Wooden Display Box.
Features
- Chisels are 11-inch with 8-inch handles
- Comes in an attractive wooden display box
- 3/8-inch gouge for rough cutting
- 1/8-inch parting tool for cutting tennons, and parting-off
- 1/2-inch oval skew for smooth cuts and finished surfaces
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Dimensions: 7.25 x 12.25 x 2.00 inches
Warranty: 2 year limited warranty
See On Amazon Similar To PSI Woodworking LCPM3 Lathe Penturning
#1
VINWOX SCR4-4 Wood Lathe Chuck, 4-Jaw Self-Centering Chuck, with 1"x8TPI thread & 3/4"x16TPI Adapter, 3 Years Warranty
Asin: B088BCMLT7 | Model: SCR4-4 | PartNumber: SCR4-4 | Ean: 0617748908194 | UPC: 617748908194
✅4" Sturdy Steel Body With Electric Plating For Long Term Anti-Rust Performance. Both Sides Of Jaw Teeth And Guides Are Ground And Hardened For Long And Stable Service Life. All Guideways And Bearing Surfaces Are Precisely Machined.
✅Stable Service And Long Life: Vinwox Gear Chuck Made From High Grade K1045 Steel Machined To Allow Closest Tolerances Is With Electric Plating For Long Term Anti-Rust Performance. Both Sides Of Jaw Teeth And Guides Are Ground, All Guideways And Bearing Surfaces Are Precisely Machined For Stable Service And Long Life.
✅Scroll Chuck Perfect For Holding Bowls, Spindles, And Other Unwieldy Wood Lathe Projects. Widely Used For Machine Tools And Accessories For General Lathes And Industrial Machines.
✅Internal Jaws Tighten Around Workpieces Varying From 1-1/2" To 3" (Or 3" Square Block). External Jaws Spread Inside Of Workpieces With Pilot Holes Ranging From 2" To 3-5/8" Included Screw Chuck Provides Even More Options For Supporting Your Projects.
Features
- Products include: Included Chuck body, a set of Tightening Levers, T allen wrench, Screw chuck, adapter converts 1'' x 8TPI to 3/4" x 16TPI and Free Automatic Spring Loaded Center Punch, MAKE SURE check your wood lathe FIT first.
- Internal jaws tighten around workpieces varying from 1-1/2 to 3 (or 3 Square Block). External jaws spread inside of workpieces with pilot holes ranging from 2 to 3-5/8 Included screw chuck provides even more options for supporting your projects
- 4 sturdy steel body with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground and hardened for long and stable service life. All guideways and bearing surfaces are precisely machined
- Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects. Widely used for machine tools and accessories for general lathes and industrial machines
- Stable Service and Long Life: VINWOX Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life
- See more on Amazon...
Brand: VINWOX | Manufacturer: VINWOX
See On Amazon #2
WEN LA3421 3.2-Amp 8-Inch by 13-Inch Variable Speed Mini Benchtop Wood Lathe , Black
Asin: B0B6YDYVZD | Model: LA3421 | PartNumber: LA3421 | Ean: 0044459934219 | UPC: 044459934219
Soft-Start 3.2-Amp Motor Starts Gradually To Prevent Damage To The Motor And Maximize Safety.
Includes A 2.3-Inch Face Plate, An Mt1 Spindle And Tailstock Taper, Two Interchangeable Tool Rests, And A Two-Year Warranty.
Adjust The Variable Speed Anywhere From 750 To 3200 Rpm.
Features An 8-Inch Swing Over The Bed And A 13-Inch Distance Between Centers.
Features
- Perfect for turning pens, bowls, cups, chess pieces, and other small workpieces
- Features an 8-inch swing over the bed and a 13-inch distance between centers
- Soft-start 3.2-amp motor starts gradually to prevent damage to the motor and maximize safety
- Adjust the variable speed anywhere from 750 to 3200 RPM
- Includes a 2.3-inch face plate, an MT1 spindle and tailstock taper, two interchangeable tool rests, and a two-year warranty
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
See On Amazon #3
WEN PM01 Wooden Lathe Pen-Turning MT1 Mandrel
Asin: B072FR29X7 | Model: PM01 | PartNumber: PM01 | Ean: 0044459163015 | UPC: 044459163015
1/4-Inch Diameter Shaft (7Mm) Runs Through The Center Of The Workpiece.
Includes 5 Slimline Spacer Bushings.
Designed To Fit The Wen 3420 Wood Lathe.
Turn Pens, Pencils And More.
Features
- Tapered Morse maximizes compatibility with most MT1 wood lathes
- Turn pens, pencils and more
- 1/4-inch diameter shaft (7mm) runs through the center of the workpiece
- Designed to fit the WEN 3420 wood Lathe
- Includes 5 slimline SPACER bushings
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
Dimensions: 3.10 x 11.80 x 3.10 Inches | Weight: 0.75 pounds
See On Amazon #4
VINWOX 8 PCS Carbide Wood Lathe Turning Tool Set, Carbide Lathe Turning Tool, Including Swan Neck Hollower, Rougher, Finisher, Detailer, Pen Turning tools, Aluminum Alloy Handles from 14" to 29"
Asin: B0CG61QPF3 | Model: wood chisel-4pcs ALU Handle | PartNumber: wood chisel-4pcs ALU Handle | Ean: 0769293700683 | UPC: 769293700683
✅The Length Of The Shank Inserted Into The Handle Is Adjustable According To Your Need On Turning Reach..
✅Simply More Turning & Long Lasting, Say Good-Bye To Sharpening Tools. Top Quality And Long Cutting Life Guaranteed..
✅Detailer With 28X10mm Carbide Tip And 3/8”X3/8” (10X10mm) Tool Shank Make Final Touch On Small Beads Or Coves, Terrific On Chuck Tenons..
✅Including One Set Carbide Tip Insert Installed On Chisel..
✅Square Rougher With 11X11x2mm Carbide Tip And 3/8”X3/8” (10X10mm) Tool Shank Removes Bulk Fast And Efficiently, Terrific On Cutting Hard Materials..
✅Round Finisher With Ø12 Mm Carbide Tip And 3/8”X3/8” (10X10mm) Tool Shank Make Finishing Fast And Efficiently, Terrific Scraping Workout..
✅Swan Neck Hollower With Ø9x1.8Mm Carbide Tip And 3/4”X3/8” (19X10mm) Thick Polished Solid Swan Neck Toolbar Features With Sturdy Turning Feeling Whenever You Start Turning, Perfect Turning On All Inside Holes! Remember 29” Extra Long Handle Is Important On Hollowing Projects..
✅Two Pieces Aluminum Alloy Handles, The Normal Rod Connected To The Carbide Toolbar, The Extended Rod Can Be Screwed Onto The Normal Rod, Flexible Tool Length From 14“ To 29”.
✅All Tool Bars, From 3/4”X3/8” Swan Neck Toolbar To 3/8”X3/8” Regular Rougher/Finisher/Detailer Toolbars Are Fully Polished For Most Smooth Sliding On Tool Rest For Each Workpiece..
Features
- The VINWOX Carbide Turning Tools are Designed with Ease of Use in Mind. It is Ideal for Wood Turners of All Skill Levels and Helps Ensure Success Right From the Start. The VINWOX Carbide Turning Tools Eliminate the Need for Sharpening of Your Turning Tools Since It Features a Rotatable Cutter Head.
- All Tool Bars, from 3/4 x3/8 Swan Neck Toolbar to 3/8 x3/8 Regular Rougher/Finisher/Detailer Toolbars are Fully Polished for Most Smooth Sliding on Tool Rest for Each Workpiece.
- The Length of the Shank Inserted into the Handle is Adjustable According to Your Need on Turning Reach.
- SWAN NECK HOLLOWER with 9x1.8mm Carbide Tip and 3/4 x3/8 (19x10mm) Thick Polished Solid Swan Neck Toolbar Features with Sturdy Turning Feeling Whenever You Start Turning, Perfect Turning on All Inside Holes! Remember 29 Extra Long Handle is Important on Hollowing Projects.
- SQUARE ROUGHER with 11x11x2mm Carbide Tip and 3/8 x3/8 (10x10mm) Tool Shank Removes Bulk Fast and Efficiently, Terrific on Cutting Hard Materials.
- ROUND FINISHER with 12 MM Carbide Tip and 3/8 x3/8 (10x10mm) Tool Shank Make Finishing Fast and Efficiently, Terrific Scraping Workout.
- DETAILER with 28x10mm Carbide Tip and 3/8 x3/8 (10x10mm) Tool Shank Make Final Touch on Small Beads or Coves, Terrific on Chuck Tenons.
- Including One Set Carbide Tip Insert Installed on Chisel.
- Two Pieces Aluminum Alloy Handles, the Normal Rod Connected to the Carbide Toolbar, the Extended Rod Can Be Screwed onto the Normal Rod, Flexible Tool Length from 14 to 29
- Simply More Turning & Long Lasting, SAY Good-bye to Sharpening tools. Top quality and Long cutting life Guaranteed.
- See more on Amazon...
Brand: VINWOX | Manufacturer: VINWOX
See On Amazon #5
ASZLBYM 5/8" 36PCS Indexable Carbide Lathe Turning Tool Insert Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with CNMG 431 + WNMG 431 + TNMG 331 Indexable Carbide Turning Insert Blades
Asin: B09F2PJ49F | Ean: 8414740898360
●Size : Diameter Of The Holder Is (5/8 X 5/8 Inches/ 16 X 16 Mm); Overall Length Is 3-7/8 Inch/ 100 Mm, Cutting Direction Is Right Hand; Applicable Machine Tool Is Lathe; Each Tool Holder Has A Black Oxidized Smooth Surface..
●Maybe You Need : If You Need 5/8" Left Hand Turning Holder Set, You Can Search For Asin : B07b8xnh98 To Buy It..
●Easy To Store : 33Pieces Indexable Carbide Turning Inserts Into 3 Plastic Boxes , Each Turning Tool Holder Is Placed In A Plastic Box, And Each Box Has A Clear Mark For Easy Identification Of The Product Model, Safe And Easy To Store..
●Material : Lathe Indexable Carbide Turning Tool Holders Are Made Of Quality 40Cr Steel; The 40Cr Steel Material Makes The Turning Tool Durable And Adaptable; Indexable Carbide Turning Insert Blades Are Made Of Cemented Carbide And Use Tin Coating, The Blade Has High Hardness, Low Friction Coefficient, Nice Wear Resistance And Chemical Stability..
Features
- PACKAGE : you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 11 pieces CNMG 431,11 pieces WNMG 431, 11 pieces TNMG 331 indexable carbide turning insert blades, cufficient quantity and easy to replace.
- MATERIAL : lathe indexable carbide turning tool holders are made of quality 40Cr steel; The 40Cr steel material makes the turning tool durable and adaptable; Indexable carbide turning insert blades are made of cemented carbide and use TIN coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
- SIZE : diameter of the holder is (5/8 x 5/8 inches/ 16 x 16 mm); Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand; applicable machine tool is lathe; each tool holder has a black oxidized smooth surface.
- EASY TO STORE : 33pieces indexable carbide turning inserts into 3 plastic boxes , each turning tool holder is placed in a plastic box, and Each box has a clear mark for easy identification of the product model, safe and easy to store.
- MAYBE YOU NEED : If you need 5/8 left hand turning holder set, you can search for ASIN : B07B8XNH98 to buy it.
- See more on Amazon...
Brand: ASZLBYM | Manufacturer: ASZLBYM
See On Amazon #6
Vevor Wood Lathe 14" x 40", Power Wood Turning Lathe 1/2HP 4 Speed 1100/1600/2300/3400RPM, Benchtop Wood Lathe with 3 Chisels Perfect for High Speed Sanding and Polishing of Finished Work - Amazon.com
Asin: B07Y9L9PYZ | Model: Wood Lathe | PartNumber: Wood Lathe | Ean: 0614198606144 | UPC: 614198606144
Large Work Capacity- 40" (1000Mm) Distance Between Centers, Cutting Diameter 14" (350Mm). High Concentricity. Moving Tailstock To Adjust Proper Distances For Workpieces..
Wrenches & Chisels: 3 Wrenches Are For Easy Using And Maintainance. 3 Chisels Provided Also, 1 X Skew Chisel, 1 X Shear Scraper And 1 X Spindle Gouge..
Solid Steel Construction- Solid Steel Constructed Wood Lathes For Durability And Strength, Providing Increased Stability And Smooth Operation, Reducing Vibration..
4 Grade Speeds- The Adjustable Belts Can Be Adjust With Ease And Accuracy Within 3400 Rpm, 1100, 1600, 2300, 3400Prm Available..
Features
- 1/2 Horse Power Motor- 1/2 Horse Power Motor, Voltage: 120V. The Powerful&Nbsp; Motor Starts Softly Offering Motor'S Maximize Safety And Low Noise.
- 4 Grade Speeds- The Adjustable Belts Can Be Adjust With Ease And Accuracy Within 3400 Rpm, 1100, 1600, 2300, 3400Prm Available.
- Large Work Capacity- 40 (1000Mm) Distance Between Centers, Cutting Diameter 14 (350Mm). High Concentricity. Moving Tailstock To Adjust Proper Distances For Workpieces.
- Solid Steel Construction- Solid Steel Constructed Wood Lathes For Durability And Strength, Providing Increased Stability And Smooth Operation, Reducing Vibration.
- Wrenches & Chisels: 3 wrenches are for easy using and maintainance. 3 chisels provided also, 1 x Skew Chisel, 1 x Shear Scraper and 1 x Spindle Gouge.
- See more on Amazon...
Brand: Vevor | Manufacturer: Mophorn
Dimensions: 10.20 x 38.40 x 16.50 Inches | Weight: 54.00 pounds
See On Amazon #7
VINWOX SCK4-3.5NV-SET Mini, Midi and Heavy-Duty 3-1/2 Wood Lathe Gear Chuck Set, Wood Lathe Key Chuck Set, 4-Jaw Self-Centering Chuck, 1"x8TPI thread and 3/4 -16TPI Adapter
Asin: B09VBHXH78 | Model: 4-3.5NV-SET | PartNumber: 4-3.5NV-SET | Ean: 0691189978893 | UPC: 691189978893
✅Powerful And Positive Grip: The Self-Locking System Of Vinwox Gear Chuck Delivers Incredible Gripping Power After Tightening, It Will Never Loosen Grip On Project. Vinwox Offer Clients An Option At A Price That Is More Affordable Than Anything Of Same Quality On The Market.
✅Stable Service And Long Life: Vinwox Gear Chuck Made From High Grade K1045 Steel Machined To Allow Closest Tolerances Is With Electric Plating For Long Term Anti-Rust Performance. Both Sides Of Jaw Teeth And Guides Are Ground, All Guideways And Bearing Surfaces Are Precisely Machined For Stable Service And Long Life.
✅Versatile Chuck Capacity: With The Help From 2” Dovetail Jaw, Pin Jaw, Step Jaw And Wide Jaw, This Strong Wood Lathe Chuck Can Hold And Grip All Kinds Of Wood Projects, From Bowls, Cups To Vases. Vinwox Gear Chuck Is Ideal For Mini, Midi And Lathes Up To 14" Swing, Capable For Turning Up To 12" Bowl..
✅Versatility: Accepts Full Range Of Nova & Record Power Chuck Accessories For Best Versatility And Functions..
Features
- Product includes: Chuck body, a set of 2" Dovetail Jaw, a set of Pin Jaw, a set of Step Jaw and a set of Wide Jaw, Tightening Gear Key, T-Allen wrench, Worm Screw Chuck, adapter converts 1'' x 8TPI to 3/4" x 16TPI, MAKE SURE check your wood lathe SPINDLE FIT first to avoid Wrong Chuck Thread to Wood Lathe Spindle !!!
- Versatility: Accepts Full Range of NOVA & Record Power Chuck Accessories for Best Versatility and Functions.
- Powerful and Positive Grip: The Self-Locking system of VINWOX Gear Chuck delivers incredible gripping power after tightening, it will never loosen grip on project. VINWOX offer clients an option at a price that is more affordable than anything of same quality on the market
- Versatile Chuck Capacity: With the help from 2 Dovetail Jaw, Pin Jaw, Step Jaw and Wide Jaw, this strong wood lathe chuck can hold and grip all kinds of wood projects, from Bowls, Cups to Vases. VINWOX Gear Chuck is ideal for Mini, Midi and lathes up to 14 swing, capable for turning up to 12 bowl.
- Stable Service and Long Life: VINWOX Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life
- See more on Amazon...
Brand: VINWOX | Manufacturer: VINWOX
See On Amazon #8
Diraeen 35Pcs Tungsten Carbide Cutters Inserts Set,Lathe Tools for Wood Lathe Turning Tools,Supplied with Screws and Screwdriver
Asin: B0C56QRJTB | Model: 35PCS | PartNumber: 35PCS
【3 Screwdrivers And 16 Screws】 The Tungsten Cutting Tool Blade Comes With Multiple Screwdrivers And Screws. Fully Equipped And Easy To Replace.
【High-Quality After-Sales Service】If You Are Not Satisfied With The Product At Any Time Within 1 Years After Purchase, We Will Provide A Refund Or Replacement. Package Included: 4*Square (11 X 11 Mm), 4*Diamond (30 X 10 Mm), 4* Round (Diameter 12 X 2.5 Mm) , 4*Round (Diameter 8.9 X 1.85 Mm), 16* Screws, 3*Screwdriver.
【Fits For Wood Lathe Turning Tools】This Combination Carbide Insert Kit Works Perfectly With Our Wood Lathe Turning Tools Kit.Meet The Requirements Of Rough Machining And Finishing Combination.
【Solid Tungsten Steel】All Of The Carbide Lathe Tools Replacement Inserts Are Made Of Quality Solid Tungsten Steel. Super Sharp And Durable, Long Lasting And Reliable, Hard To Break Or Deform, Providing You With Nice Use Experiences For A Long Time.
Features
- Carbide Lathe Tools Replacement Tips with Screws and Screwdriver Fits For Most Size 11 mm Square with Radius, 12 mm and 8.9 mm Round, 30 x 10 mm Diamond
- Solid Tungsten Steel All of the carbide lathe tools replacement inserts are made of quality solid tungsten steel. Super sharp and durable, long lasting and reliable, hard to break or deform, providing you with nice use experiences for a long time
- 3 screwdrivers and 16 screws The tungsten cutting tool blade comes with multiple screwdrivers and screws. Fully equipped and easy to replace
- Fits for wood lathe turning tools This combination carbide insert kit works perfectly with our wood lathe turning tools kit.Meet the requirements of rough machining and finishing combination
- High-quality after-sales service If you are not satisfied with the product at any time within 1 years after purchase, we will provide a refund or replacement. Package included: 4*Square (11 x 11 mm), 4*Diamond (30 x 10 mm), 4* Round (diameter 12 x 2.5 mm) , 4*Round (diameter 8.9 x 1.85 mm), 16* Screws, 3*Screwdriver
- See more on Amazon...
Brand: Diraeen | Manufacturer: DIRAEEN
See On Amazon #9
PSI Woodworking Products TM32 1/2-Inch Drill Chuck with #2 Morse Taper Arbor (1/2" 2MT)
Asin: B004CVJC20 | Model: TM32 | PartNumber: TM32 | Ean: 7241870660687, 0798167749176, 7566908051184, 0718122018208, 5272003698286 | UPC: 718122018208, 798167749176
The #2Mt Arbor Accepts 1/4" X 20Tpi Draw Bolt; Draw Bolt Not Included.
Great For Holding Drill Bits, Small Turnings, Dowels, Pen Mandrel Shafts, And Much More.
Removes Easily With Knock Out Bar.
This 3-Jaw Chuck Will Mount Into The Headstock Or Tailstock Of Any Lathe That Accepts #2Mt Accessories.
Features
- Includes the 1/2" Drill Chuck, #2 Morse Taper Arbor, and Jaw Tightening Key
- This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories
- The #2MT Arbor accepts 1/4 x 20tpi draw bolt; Draw bolt not included
- Removes easily with knock out bar
- Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Warranty: 2 Years Under Normal Use
See On Amazon #10
PSI Woodworking LCENT3210 Super 4-Prong Spring-Loaded Drive Center #2MT
Asin: B01MA26GPP | Model: LCENT3210 | PartNumber: LCENT3210 | Ean: 0718122015306 | UPC: 718122015306
Spring-Loaded Center Point Simplifies Positioning Of Your Spindle.
Spring-Loaded Center Point Helps Avoid Splitting Your Work Piece.
Spring-Loaded Center Point Retracts When Tailstock Pressure Is Applied.
Sharp Spurs Give A Strong Bite Into Wood Work Piece.
Features
- 1" Diameter with #2MT
- Sharp spurs give a strong bite into wood work piece
- Spring-loaded center point simplifies positioning of your spindle
- Spring-loaded center point retracts when tailstock pressure is applied
- Spring-loaded center point helps avoid splitting your work piece
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking Products
Dimensions: 1.00 x 4.00 x 1.00 Inches | Weight: 0.45 Pounds
Warranty: 2 years with normal use
See On Amazon #11
WEN LA3424 4.5-Amp 12-Inch by 18-Inch 5-Speed Benchtop Wood Lathe , Black
Asin: B09XWRBJ95 | Model: LA3424 | PartNumber: LA3424 | Ean: 0044459934240 | UPC: 044459934240
Includes 3-1/8 Inch Faceplate For Turning Bowls, Cups And Other Non-Spindle Workpieces.
Features A 4.5A Motor, An Mt2 Headstock Spur Center, An Mt2 Tailstock Live Center, An 8-Inch Tool Rest, And An Onboard Accessory Holder.
Mt2 Tailstock And Headstock Tapers Allow For Compatibility With A Wide Variety Of Lathe Accessories.
Switch Between Five Different Speeds: 520, 900, 1400, 2150, Or 3400 Rpm.
Features
- Attack workpieces up to 18 inches long and 12 inches wide
- Switch between five different speeds: 520, 900, 1400, 2150, or 3400 RPM
- Includes 3-1/8 inch faceplate for turning bowls, cups and other non-spindle workpieces
- MT2 tailstock and headstock tapers allow for compatibility with a wide variety of lathe accessories
- Features a 4.5A motor, an MT2 headstock spur center, an MT2 tailstock live center, an 8-inch tool rest, and an onboard accessory holder
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
Dimensions: 16.25 x 30.25 x 8.75 Inches
See On Amazon #12
ASZLBYM 11pcs RPMT10T3 MOE R5 Indexable Carbide Milling Inserts Blade Milling Cutter with 5/8"/16mm SRDPN1616H10 Indexable Carbide Milling Tool Holder Metal Lathe Cutting Tools
Asin: B09JBYZW1H | Model: 01 | PartNumber: 01 | Ean: 0747388941685 | UPC: 747388941685
Milling Tool Holder Cutter Size : Shank Diameter ( Length×Width ) : 5/8"*5/8"(16Mm*16Mm) ; Overall Length : 100 Mm ≈ 3.93" ..
Easy To Store: The Milling Tool Holder And Carbide Milling Inserts Are Packed In A Plastic Container, Safe And Easy To Store, Please Rest Assured To Buy!.
Rpmt10t3 Moe Carbide Milling Insert Size : Insert Style : Rpmt , Thickness: 0.156" ≈ 3.97Mm , Diameter : 0.393≈ 10Mm, P=11° Degree..
Material : The Srdpn1616h10 5/8" Lathe Milling Tool Holder Material Is 40Cr Steel, It Has The Characteristics Of Durability, Sturdiness And Stability, And Good Anti-Rust Performance. The Rpmt10t3 Moe Indexable Milling Inserts Cutter Material Is Carbide, And The Coating Is Cvd Al2o3 Ticn, It Has Good Toughness, Wear Resistance And High Temperature Resistance, The Milling Insert Can Be Used For Milling Cast Iron, Steel Parts And Stainless Steel..
Features
- PACKAGE INCLUDES : You will receive 1pc SRDPN1616H10 5/8 /16mm shank diameter carbide lathe milling tool holder , 11pcs RPMT10T3 MOE indexable carbide milling inserts cutters and 1pc T15 wrench.
- Material : The SRDPN1616H10 5/8 lathe milling tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The RPMT10T3 MOE indexable milling inserts cutter material is carbide, and the coating is CVD Al2O3 TICN, It has good toughness, wear resistance and high temperature resistance, the milling insert can be used for milling cast iron, steel parts and stainless steel.
- Milling tool holder cutter size : Shank Diameter ( length width ) : 5/8*5/8(16mm*16mm) ; Overall Length : 100 mm 3.93 .
- RPMT10T3 MOE carbide milling insert size : Insert Style : RPMT , thickness: 0.156 3.97mm , diameter : 0.393 10mm, P=11 degree.
- Easy to store: the milling tool holder and carbide milling inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!
- See more on Amazon...
Brand: ASZLBYM | Manufacturer: ASZLBYM
See On Amazon #13
WEN 34035 6-Amp 14-Inch by 20-Inch Variable Speed Benchtop Wood Lathe
Asin: B0992RZXK9 | Model: 34035 | PartNumber: 34035 | Ean: 0044459340355 | UPC: 044459340355
Includes 4 Inch Faceplate For Turning Bowls, Cups And Other Workpieces.
Features A 6A Motor, Mt2 Spur Center, Mt2 Live Center, 8-Inch Tool Rest, And An Onboard Accessory Holder.
Mt2 Tailstock And Headstock Tapers, Along With 1"- 8 Spindle Thread, Allow For Compatibility With A Wide Variety Of Lathe Accessories.
Adjust The Variable Speed Anywhere From 250 To 3550 Rotations Per Minute.
Features
- Attack workpieces up to 20 inches long and 14 inches wide
- Adjust the variable speed anywhere from 250 to 3550 rotations per minute
- Includes 4 inch faceplate for turning bowls, cups and other workpieces
- MT2 tailstock and headstock tapers, along with 1- 8 spindle thread, allow for compatibility with a wide variety of lathe accessories
- Features a 6A motor, MT2 spur center, MT2 live center, 8-inch tool rest, and an onboard accessory holder
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
Dimensions: 22.60 x 38.00 x 11.80 Inches
See On Amazon #14
CNC Lathe Grooving Tool Holder MGEHR1616-3(0.63 Inch), with Three MGMN300 Cemented Carbide Blades. Yellow Processed Steel, Fuchsia Processed Stainless Steel, Silver Processed Aluminum Alloy. (3mm)
Asin: B089VKH4PX | Model: MGEHR1616-3 | PartNumber: MGEHR1616-3 | Ean: 8424523373809
High Temperature Heat Treatment Process, High Temperature Tempering, Greatly Improve The Strength, Hardness, Fatigue Resistance And Toughness Of The Tool Holder, And The Surface Is Bright..
The Paired Blades Are For Three Different Materials: Yellow Alloy Blades Are Used For Processing Steel, And Purple Alloy Blades Are Used For Processing Stainless Steel，Silver Processed Aluminum Alloy And Copper。.
The Blade Coating Is Thicker, Sprayed By Stress Accumulation, More Stable And Wear-Resistant, And The Product Has A Higher Finish..
Blade: High-Quality Hard Alloy With Good Wear-Resistant Coating, Smooth Cutting Geometry, Effectively Improve The Life Of The Tool..
Features
- Tool Holder: Made of High-Quality Alloy Steel 40CR, Using Free Forging Process, with Higher Mechanical Properties. Prompt Work Efficiency.
- Blade: High-Quality Hard Alloy with Good Wear-Resistant Coating, Smooth Cutting Geometry, Effectively Improve the Life of The Tool.
- High Temperature Heat Treatment Process, High Temperature Tempering, Greatly Improve The Strength, Hardness, Fatigue Resistance and Toughness of The Tool Holder, and The Surface is Bright.
- The Blade Coating is Thicker, Sprayed by Stress Accumulation, More Stable And Wear-Resistant, And The Product Has a Higher Finish.
- The Paired Blades are for Three Different Materials: Yellow Alloy Blades are Used For Processing Steel, And Purple Alloy Blades Are Used for Processing Stainless Steel Silver processed aluminum alloy and copper
- See more on Amazon...
Brand: LingGan | Manufacturer: LingGan
Dimensions: 1.26 x 4.96 x 1.26 inches | Weight: 0.49 Pounds
See On Amazon #15
3/8 SRACR1010H06 + R3 Yellow Lathe Turning Holders 90 Degrees Lathe Turning & Profiling Tool Holder for Round Carbide Inserts RCMT0602 Right Hand
Asin: B0C2G4RC25 | Ean: 0794697191041 | UPC: 794697191041
Suitable For Finishing And Semi-Finishing Of Various Steel, Stainless Iron And Cast Iron Workpieces;.
Package Includes: 1Pc Sracr1010 H06 Holder + 10Pcs R3 Inserts +1Pc T8 Wrench.
The Holder And Carbide Inserts Are Packed In A Plastic Container, Safe And Easy To Store ;.
About The Inserts: Carbide And Coated, Insert Dia:6Mm=0.236In, Insert Thinckness:2.3Mm=0.09In ;.
Features
- About the holders --- 40Cr material with forging process , strong and durable, shank dia:10mm=3/8 , shank length:100mm = 3.9in , Cuttinng angle:90 deg, Screw:M2.5*6
- About the inserts: Carbide and coated, insert dia:6mm=0.236in, insert thinckness:2.3mm=0.09in ;
- Suitable for finishing and semi-finishing of various steel, stainless iron and cast iron workpieces;
- The holder and carbide inserts are packed in a plastic container, safe and easy to store ;
- package includes: 1pc SRACR1010 H06 holder + 10pcs R3 inserts +1pc T8 wrench
- See more on Amazon...
Brand: zouzmin | Manufacturer: zouzmin
See On Amazon #16
33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades
Asin: B092R2GLPH | Model: Honoson-916243 | PartNumber: Honoson-916243
Size: Diameter Of The Handle Is (5/8 X 5/8 Inches/ 16 X 16 Mm); Overall Length Is 3-7/8 Inch/ 100 Mm, Cutting Direction Is Right Hand; Applicable Machine Tool Is Lathe; Each Tool Holder Has A Black Oxidized Smooth Surface, And The Tool Hardness (Hrc Up And Down 48 Degrees) And Accuracy Have Reached The First Grade.
Note: Due To The Slight Color Change Of Manual Measurement And Different Display Settings, Please Allow A Difference Of 1-3 Cm; Due To The Difference Between Different Monitors, The Picture May Not Reflect The Actual Color Of The Item.
Easy To Store: Insert 30 Pieces Of Cemented Carbide Into 3 Boxes, And Put Them In A Plastic Container, Safe And Easy To Store, Compatible With Mtjnl1616h16, Mwlnl1616h08, Mclnl1616h12 Or Mtjnr1616h16, Mwlnr1616h08, Mclnr1616h12.
Material: Lathe Indexable Carbide Turning Tool Holders Are Made Of Quality Cemented Carbide And Tungsten Steel; The Cemented Carbide Material Makes The Turning Tool Durable And Adaptable; Indexable Carbide Turning Insert Blades Are Made Of Cemented Carbide And Use Pvd Coating, The Blade Has High Hardness, Low Friction Coefficient, Nice Wear Resistance And Chemical Stability.
Features
- Package: you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace
- Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel; The cemented carbide material makes the turning tool durable and adaptable; Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability
- Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm); Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand; Applicable machine tool is lathe; Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade
- Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12
- Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm; Due to the difference between different monitors, the picture may not reflect the actual color of the item
- See more on Amazon...
Brand: Honoson | Manufacturer: Honoson
See On Amazon #17
LYMMIYTC 3/8" 10mm Indexable Lathe Turning Tool 21Pcs Kit- 7Pcs Metal Lathe Tools Holder Set with 14Pcs Carbide Insert Turning Inserts for Turning Grooving Boring Threading Cutting.Carbide Lathe Tools
Asin: B0CQX32CZK | Model: SDJCR1010H07 | PartNumber: SDJCR1010H07 | Ean: 0756593187771 | UPC: 756593187771
Excellent Materials:The Turning Holders Is Made Of High-Quality 40Cr Steel And Is Coated With Anti-Rust Oil. It Has Excellent Hardness And Speed, And Is Durable, Eliminating The Trouble Of Frequent Tool Replacement..
The Turning Tool Holders Adopts A Detachable Inserts Design, Making Inserts Replacement More Convenient And Faster.We Provide 24H Support, 3Months Refund, 360Days Warranty. Don't Hesitate–Get Yours Now!.
Versatile Inserts:Our Carbide Inserts Are Cvd Coated. Strong And Sharp, With Excellent Cutting Performance And Chip Removal Effect. Suitable For Stainless Steel, Steel, Cast Iron, Etc..
Package Include:7Pcs 3/8" 10Mm Metal Lathe Tools Holders, 14Pcs Carbide Inserts And 8Pcs Matched Wrenches.Whether You Are A Professional Or A Diy Enthusiast, Our Products Are Your Reliable Assistants..
Features
- All-in-One Kit:Our Indexable Lathe Turning Tool Set have 7Pcs different angled tool holders:SCLCR1010H06,SNR0010K11,SDJCR1010H07,SDNCN1010H07,MGEHR1010-2,SER1010H11,S10K-SCLCR06.You can easily choose the right tool for any project.
- Package include:7pcs 3/8 10mm metal lathe tools holders, 14pcs carbide inserts and 8pcs matched wrenches.Whether you are a professional or a DIY enthusiast, our products are your reliable assistants.
- Excellent materials:The turning holders is made of high-quality 40Cr steel and is coated with anti-rust oil. It has excellent hardness and speed, and is durable, eliminating the trouble of frequent tool replacement.
- Versatile Inserts:Our carbide inserts are CVD coated. Strong and sharp, with excellent cutting performance and chip removal effect. Suitable for stainless steel, steel, cast iron, etc.
- The turning tool holders adopts a detachable inserts design, making inserts replacement more convenient and faster.We provide 24h support, 3months refund, 360days warranty. Don't hesitate get yours now!
- See more on Amazon...
Brand: LYMMIYTC | Manufacturer: LYMMIYTC
See On Amazon #18
PSI Woodworking CF3SC 3" Lathe Faceplate/Screwchuck for 1" x 8tpi Spindle
Asin: B079M78BB5 | Model: CF3SC | PartNumber: CF3SC | Ean: 0718122014200 | UPC: 718122014200
(4) Mounting Holes With Additional Screw Chuck Option.
Combination Of Screw Chuck & Faceplate Mount Provides A Very Safe & Secure Bowl Turning Setup.
Includes (2) 1" Screw Chucks And (8) Spare Mounting Screws.
Pre-Threaded To 1" X 8Tpi.
Features
- 3" Steel faceplate with screw chuck
- Pre-threaded to 1 x 8TPI
- (4) mounting holes with additional screw chuck option
- Includes (2) 1 screw chucks and (8) spare mounting screws
- Combination of screw chuck & faceplate mount provides a very safe & secure bowl turning setup
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking Products
Dimensions: 3.00 x 3.00 x 2.00 inches | Weight: 1.00 pounds
Warranty: 2 years under normal use
See On Amazon #19
1 pcs MCSNL1616H12 Lathe Turning Tool Holder + 10pcs CNMG120408-MA VP15TF Carbide Insert Turning Tips Tool
Asin: B07YQJ736W | Model: MCSNL1616H12+ CNMG120408 | PartNumber: MCSNL1616H12+ CNMG120408 | Ean: 8414806129605
Package Included:1 Pcs Mcsnl1616h12+ 10Pcs Cnmg120408-Ma Vp15tf.
Blades Exquisite Workmanship, High Strength, High Toughness, Stable And Durable.If You Need More Cnmg120408 Inserts ,Please Search For Asin 【B07yxwnvdr】.
Black Oxided Smooth Finish On Each Turning Tool Holder Style And Shank Size..
Shank D：16Mm. Shank L: 100Mm.
Features
- Model MCSNL 1616H12+ CNMG120408-MA VP15TF
- Shank D 16mm. Shank L: 100mm
- Package included:1 pcs MCSNL1616H12+ 10pcs CNMG120408-MA VP15TF
- Black oxided smooth finish on each turning tool holder style and shank size.
- Blades exquisite workmanship, high strength, high toughness, stable and durable.If you need more CNMG120408 inserts ,please search for ASIN B07YXWNVDR
- See more on Amazon...
Brand: yangzhoumi | Manufacturer: yangzhoumi
See On Amazon #20
DEEFIINE Carbide Tip Wood Lathe Turning Tool set With Bowl sander, Lathe Roughing and Finishing Hollowing Tool Interchangeable Aluminum Alloy Handle with 4pcs Carbide Blade For Woodturning
Asin: B0CDRGBBJ1 | Model: WTT060402BS-C | PartNumber: WTT060402BS-C
【Wood Turning Tool Kit】The High-Quality Cnc Machining Made Of Square Stainless Steel Makes It Stronger, Harder And Rolls Less Than Round Shaft Tools. It Has A Square Shaft So That The Knife Can Be Used With A Flat Back. Keep The Shelf Flat And Flush With The Floor。.
【Ergonomic Design】 The Turning Tool Is Equipped With 1Pcs Frosted Handle That Fits Comfortably In The Hand. In Addition, It Is Equipped With An Extension Handle That Can Be Used In Deeper Scenes, Aluminium Oxide Alloy Handles For Grip, Comfort And Durability. Making It A Safe Choice.If You Need More Grip Handles.Please Visit The Deefiine Store,Many Products For You To Choose..
【Rotary Cutter Design】 The Indexable Carbide Tool Blade Can Be Rotated Or Replaced To Provide New Cutting Edge When Needed.If You Need More Carbide Cutters.Please Visit The Deefiine Store,Many Products For You To Choose..
【Sharp And Easy】 Our Carbide Turning Tools Set Can Be Used To Quickly Process Any Workpiece On Your Lathe. The Wood Lathe Tool Set Can Provide A Smooth And Clean Cutting Effect By Four Types Of Cutters Designed For Different Grinding Effects. This Saves A Lot Of Time When Grinding And Honing, Because You Can Easily Replace The Blade When It Becomes Dull..
Features
- New design Our wood turning tools set with bowl sander,Bowl sander is new design product with a patent.
- Sharp and easy Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull.
- wood turning Tool kit The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor
- Rotary cutter design the indexable carbide tool blade can be rotated or replaced to provide new cutting edge when needed.If you need more carbide cutters.Please visit the DEEFIINE store,many products for you to choose.
- Ergonomic design the turning tool is equipped with 1pcs frosted handle that fits comfortably in the hand. In addition, it is equipped with an extension handle that can be used in deeper scenes, aluminium oxide alloy handles for grip, comfort and durability. making it a safe choice.If you need more grip handles.Please visit the DEEFIINE store,many products for you to choose.
- See more on Amazon...
Brand: DEEFIINE | Manufacturer: DEEFIINE
Dimensions: 9.00 x 14.60 x 2.80 Inches
See On Amazon
Looking For Something Else?
Search