COMP Cams 813-1 Solid/Mechanical Lifter
Asin: B000R9VLAC | Model: 813-1 | PartNumber: 813-1 | Ean: 0036584210061 | UPC: 036584210061
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Lifter Crown Is Ground To A Precise Radius For Proper Break-In And Guaranteed Long Life.
For Small And Big Block Chevy, Single Piece.
Oil Metering Band Is Milled To The Correct Depth To Prevent Too Much Oil From Being Delivered To The Top Of The Motor.
Manufactured Using The Tightest Tolerances In The Industry.
Features
- .842 inch diameter; 98g weight; 1.88 inch seat height
- Manufactured using the tightest tolerances in the industry
- Lifter crown is ground to a precise radius for proper break-in and guaranteed long life
- Oil metering band is milled to the correct depth to prevent too much oil from being delivered to the top of the motor
- for Small and Big Block Chevy, Single Piece
- See more on Amazon...
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 0.60 x 4.20 x 2.50 Inches | Weight: 0.22 pounds
See On Amazon Similar To COMP Cams 8131 Solid Mechanical
#1
COMP Cams 8121 High Energy Hydraulic Lifter
Asin: B000CIOBZ0 | Model: 812-1 | PartNumber: 812-1 | Ean: 0036584220053 | UPC: 036584220053
Continuous Contact Between Metering Valve And Hardened Pushrod Seat Is Maintained, Eliminating Excessive Oiling At High Engine Speeds.
Lightweight Check Valve Disc Allows For Quicker Response And Maintains Added Control At All Engine Speeds And Loads.
Contain A Longer Piston Than Conventional Hydraulic Lifters, Which Provides More Load Bearing Surface And Increases Lifter Longevity.
Patented Orifice Metering Valve Precisely Meters Oil To The Rocker Arms.
Features
- .842 inches diameter; 94 gram weight; 1.99 inches seat height
- Patented orifice metering valve precisely meters oil to the rocker arms
- Continuous contact between metering valve and hardened pushrod seat is maintained, eliminating excessive oiling at high engine speeds
- Contain a longer piston than conventional hydraulic lifters, which provides more load bearing surface and increases lifter longevity
- Lightweight check valve disc allows for quicker response and maintains added control at all engine speeds and loads
- See more on Amazon...
First Available: 09/11/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 0.50 x 3.00 x 4.00 Inches | Weight: 0.10 pounds
Warranty: 1 Year Limited
See On Amazon #2
COMP Cams 98012 Vavle Spring
Asin: B00062YHH4 | Model: 980-12 | PartNumber: 980-12 | Ean: 0036584271246 | UPC: 036584271246
.490 Inch Maximum Lift.
Part Number: 980-12.
92 Pounds 1.700 Inches Seat Load And 230 Pounds 1.250 Inches Open Load Capacity.
Features
- 1.230 inches outside diameter, .876 inches inside diameter single valve spring
- 92 pounds 1.700 inches seat load and 230 pounds 1.250 inches open load capacity
- .490 inch maximum lift
- Part number: 980-12
- See more on Amazon...
First Available: 09/07/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.00 x 10.00 x 3.00 Inches | Weight: 2.30 pounds
See On Amazon #3
COMP Cams 69-400-8 High Energy 218/212 Hydraulic Roller Cam for Buick Grand National 231 V6
Asin: B001O0BY9G | Model: 69-400-8 | PartNumber: 69-400-8 | Ean: 0036584064008 | UPC: 036584064008
218/212 Duration At .050". 112 Degree Lobe Separation Angle..
Fits Buick 231 Grand National 6 Cylinder.
Made In Usa.
High Energy Grinds Are A Good Blend Of Efficiency And Performance: Ideal For Performance Street Rebuilds..
Works Well With Mainly Stock Components Such As Rockers, Manifolds, Heads, Compression, Torque Converters And Gears..
0.511"/0.504" Valve Lift.
1,500-6,200 Rpm Operating Range.
Features
- Performance upgrade for use with aftermarket turbo. Downpipe, intercooler preferred. Needs computer modifications or aftermarket computer.
- 1,500-6,200 RPM Operating Range
- 218/212 Duration at .050. 112 Degree Lobe Separation Angle.
- 0.511/0.504 Valve Lift
- High Energy grinds are a good blend of efficiency and performance: ideal for performance street rebuilds.
- Works well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
- Fits Buick 231 Grand National 6 Cylinder
- Made in USA
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 4.50 x 25.20 x 4.70 Inches | Weight: 8.00 Pounds
See On Amazon #4
COMP Cams (975-1) .953" O.D. Single Inner Valve Spring
Asin: B00062Z9PS | Model: 975-1 | PartNumber: 975-1 | Ean: 0036584271116 | UPC: 036584271116
Inner Valve Spring Only.
55 Pounds 1.500 Inches Seat Load And 127 Pounds 1.000 Inches Open Load Capacity.
Features
- .953 inches outside diameter, .697 inside diameter single inner valve spring
- 55 pounds 1.500 inches seat load and 127 pounds 1.000 inches open load capacity
- Inner valve spring only
- See more on Amazon...
First Available: 08/31/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 0.50 x 6.00 x 4.00 Inches
Warranty: 1 Year Limited
See On Amazon #5
COMP Cams (975-16) .953" O.D. Single Inner Valve Spring, (Set of 16)
Asin: B000630KCE | Model: 975-16 | PartNumber: 975-16 | Ean: 0036584271130 | UPC: 036584271130
Inner Valve Spring Only.
Part Number: 975-16.
55 Pounds 1.500 Inches Seat Load And 127 Pounds 1.000 Inches Open Load Capacity.
Features
- .953 inches outside diameter, .697 inside diameter single inner valve spring
- 55 pounds 1.500 inches seat load and 127 pounds 1.000 inches open load capacity
- Inner valve spring only
- Part number: 975-16
- See more on Amazon...
First Available: 08/31/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.10 x 10.20 x 2.90 Inches | Weight: 1.30 pounds
Warranty: 1 Year Limited
See On Amazon #6
COMP Cams 08-502-8 Xtreme Energy Computer Controlled 218/224 Hydraulic Roller Cam for OE Roller SBC
Asin: B000V9ET48 | Model: 08-502-8 | PartNumber: 08-502-8 | Ean: 0036584063223 | UPC: 036584063223
218/224 Duration At .050". 112 Degree Lobe Separation Angle.
Fits Chevrolet Gen 1 305/350 Small Blocks Originally Equipped With Roller Camshafts..
Made In Usa.
Quicker Opening Lobe Profiles Deliver Increased Responsiveness And More Area Under The Lift Curve..
Designed For Computer Controlled Vehicles..
0.495/0.503 Valve Lift.
1,500-5,500 Rpm Operating Range.
Features
- Good for TPI 305 or 350 with upgraded exhaust. Requires custom tuning.
- 1,500-5,500 RPM Operating Range
- 218/224 Duration at .050. 112 Degree Lobe Separation Angle
- 0.495/0.503 Valve Lift
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Designed for computer controlled vehicles.
- Fits Chevrolet GEN 1 305/350 Small Blocks originally equipped with roller camshafts.
- Made in USA
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: Competition Cams
Dimensions: 2.70 x 23.30 x 2.90 inches | Weight: 8.18 Pounds
See On Amazon #7
COMP Cams 12-970-9 Drag Race 279/286 Solid Roller Cam for Chevrolet Small Block
Asin: B001O0BTFA | Model: 12-970-9 | PartNumber: 12-970-9 | Ean: 0036584065975 | UPC: 036584065975
279/286 Duration At .050". 108 Degree Lobe Separation Angle.
Fits Chevrolet Gen 1 Small Blocks Including The 262, 265, 267, 283, 302, 305, 307, 327, 350 And 400. Does Not Fit Lt1/Lt4, Or Factory Roller Small Blocks Built From 1985 And Newer..
Made In Usa.
Strip Ready - Comp Cams Drag Race Series Was Developed To Propel Your Drag Car To The Finish Line First. Including More Aggressive Lobe Designs, Drag Race Grinds Deliver Exceptional Power For Every Application..
N/A, Nitrous, Blower And Turbo - Regardless Of The Build, Comp's Drag Race Line Has A Camshaft For Your Engine. With Grinds For Naturally Aspirated, Blown, Turbo And Nitrous Engines, The Drag Race Series Was Developed For The Most Common Drag Race Engine Combinations Out There..
0.679/0.645 Valve Lift.
5,000-7,500 Rpm Operating Range.
Features
- 400+ c.i., good heads, high compression, .900" base circle.
- 5,000-7,500 RPM Operating Range
- 279/286 Duration at .050. 108 Degree Lobe Separation Angle
- 0.679/0.645 Valve Lift
- Strip Ready - COMP Cams Drag Race series was developed to propel your drag car to the finish line first. Including more aggressive lobe designs, Drag Race grinds deliver exceptional power for every application.
- N/A, Nitrous, Blower and Turbo - Regardless of the build, COMP's Drag Race line has a camshaft for your engine. With grinds for naturally aspirated, blown, turbo and nitrous engines, the Drag Race series was developed for the most common drag race engine combinations out there.
- Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer.
- Made in USA
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 8.22 pounds
See On Amazon #8
COMP Cams 12-208-3 Dual Energy 211/221 Hydraulic Flat Cam for Chevrolet Small Block
Asin: B01M1BN00G | Model: 12-208-3 | PartNumber: 12-208-3 | Ean: 0036584313335 | UPC: 036584313335
211/221 Duration At .050". 110 Degree Lobe Separation.
Fits Chevrolet Gen 1 Small Blocks Including The 262, 265, 267, 283, 302, 305, 307, 327, 350 And 400. Does Not Fit Lt1/Lt4, Or Factory Roller Small Blocks Built From 1985 And Newer..
Made In Usa.
For Applications Where A Slight Decrease In Low-End Power Is Acceptable In Exchange For Increased Mid And Upper Rpm Power..
Stock Exhaust Safe - Thanks To A Longer Exhaust Duration, Comp Cams Dual Energy Camshafts Are A Good Choice When Using Stock Exhaust Systems..
0.442"/0.465" Valve Lift.
1,500-5,750 Rpm Operating Range.
Features
- Very strong mid-range. Lopey idle. Everyday performance for stock exhaust.
- 1,500-5,750 RPM Operating Range
- 211/221 Duration at .050. 110 Degree Lobe Separation
- 0.442/0.465 Valve Lift
- For applications where a slight decrease in low-end power is acceptable in exchange for increased mid and upper rpm power.
- Stock Exhaust Safe - Thanks to a longer exhaust duration, COMP Cams Dual Energy camshafts are a good choice when using stock exhaust systems.
- Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer.
- Made in USA
- See more on Amazon...
First Available: 07/15/2019
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.75 x 24.50 x 3.00 inches
Warranty: 1 Year Limited
See On Amazon #9
COMP Cams LS Conical Valve Spring Kit w/Chromemoly Retainers
Asin: B011SEW3YC | Model: 7228CS-KIT | PartNumber: 7228CS-KIT | Ean: 0036584286066 | UPC: 036584286066
Brand: Comp Cams
See On Amazon #10
COMP Cams 4630-8 Poly Lock (7/16 High Energy Aluminum)
Asin: B0066SSGW4 | Model: 4630-8 | PartNumber: 4630-8 | Ean: 0036584238164 | UPC: 036584238164
Package Quantity: 1.
Country Of Origin: United States.
Package Weight: 2.84 Lbs.
Features
- Package Dimensions: 6.0" (L) x 4.75" (W) x 4.0" (H)
- Package Weight: 2.84 lbs
- Package Quantity: 1
- Country Of Origin: United States
- See more on Amazon...
First Available: 11/28/2016
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.00 x 4.00 x 2.75 inches | Weight: 0.84 pounds
See On Amazon #11
Comp Cams 47602 Silver Cam Degree Brushing - Pack of 5
Asin: B000V9ESZ8 | Model: 47602 | PartNumber: 47602 | Ean: 0036584390732 | UPC: 036584390732
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 1.25 x 6.50 x 3.75 Inches | Weight: 0.00 pounds
See On Amazon #12
COMP Cams 12-906-9 Drag Race/Oval Track 276/284 Solid Roller Cam for Chevrolet Small Block
Asin: B000V9CVAM | Model: 12-906-9 | PartNumber: 12-906-9 | Ean: 0036584690184 | UPC: 036584690184
Great Performance.
Enhance Your Vehicle.
Backed By Manufacturer's Warranty.
Features
- Competition Cams a trusted industry leader
- Backed by manufacturer's Warranty
- Great Performance
- Enhance your vehicle
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.60 x 23.30 x 2.90 Inches | Weight: 8.77 pounds
See On Amazon #13
COMP Cams 18-412-8 Magnum Computer Controlled 206/210 Hydraulic Roller Cam for Chevrolet 262/4.3L
Asin: B000P5D9NK | Model: 18-412-8 | PartNumber: 18-412-8 | Ean: 0036584780649 | UPC: 036584780649
Great Performance.
Part Number: 18-412-8.
Country Of Origin : United States.
Features
- Competition Cams A Trusted Industry Leader
- Country of origin : United States
- Great Performance
- Part number: 18-412-8
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.60 x 24.10 x 2.90 Inches | Weight: 6.88 pounds
See On Amazon #14
COMP Cams 08-300-8 Computer Controlled 206/210 Hydraulic Roller Cam for OE Roller SBC
Asin: B000N5OLDO | Model: 08-300-8 | PartNumber: 08-300-8 | Ean: 0036584780571 | UPC: 036584780571
Great Performance.
Enhance Your Vehicle.
Backed By Manufacturer's Warranty.
Features
- Competition Cams a trusted industry leader
- Backed by manufacturer's Warranty
- Great Performance
- Enhance your vehicle
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: Competition Cams
Dimensions: 2.59 x 23.30 x 2.99 Inches | Weight: 8.80 pounds
See On Amazon #15
COMP Cams 08-430-8 Camshaft (CS 280H-R10)
Asin: B000CIU9KQ | Model: 08-430-8 | PartNumber: 08-430-8 | Ean: 0036584780021 | UPC: 036584780021
Great Performance.
Enhance Your Vehicle.
Backed By Manufacturer's Warranty.
Features
- Competition Cams a trusted industry leader
- Backed by manufacturer's Warranty
- Great Performance
- Enhance your vehicle
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: Competition Cams
Dimensions: 2.67 x 14.25 x 2.91 inches | Weight: 8.60 Pounds
See On Amazon #16
COMP Cams (947-1) 1.645" O.D. Triple Valve Spring
Asin: B00062YH7Y | Model: 947-1 | PartNumber: 947-1 | Ean: 0036584280347 | UPC: 036584280347
338 Pounds 2.000 Inches Seat Load And 849 Pounds 1.250 Inches Open Load Capacity.
Part Number: 947-1.
1.645 Inches Outside Diameter, .635 Inch Inside Diameter Triple Valve Spring.
Features
- .790 inch maximum lift
- 1.645 inches outside diameter, .635 inch inside diameter triple valve spring
- 338 pounds 2.000 inches seat load and 849 pounds 1.250 inches open load capacity
- Part number: 947-1
- See more on Amazon...
First Available: 08/31/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 1.40 x 4.00 x 1.40 Inches | Weight: 0.46 pounds
Warranty: 1 Year Limited
See On Amazon #17
COMP Cams K09-412-8 Magnum Computer Controlled 206/210 Hydraulic Roller Cam K-Kit Chevrolet 262/4.3L
Asin: B001R98HVM | Model: K09-412-8 | PartNumber: K09-412-8 | Ean: 0036584463023 | UPC: 036584463023
206/210 Duration At .050". 112 Degree Lobe Separation Angle. 0.5"/0.5" Valve Lift.
Fits '87+ Chevrolet 262/4.3L V6 W/O Balance Shaft.
Made In Usa.
The Computer Controlled Grind Family Includes Grinds For Both Stock And Modified Efi Systems, With A Wide Variety Of Stages For Significant Power Gains..
Designed For Throttle Body Injected And Tuned Port Injected Engines..
K Kits Vary In Their Contents, But Generally Contain A Camshaft, A Set Of Lifters, Valve Springs, Retainers, Locks, Valve Seals, Timing Set, Decals And Instructions. Check Description For More Accurate Listing Of Kit Contents..
1,200-4,500 Rpm Operating Range.
Features
- Works with stock computer and fuel injection. Good low end torque and mileage.
- 1,200-4,500 RPM Operating Range
- 206/210 Duration at .050. 112 Degree Lobe Separation Angle. 0.5/0.5 Valve Lift
- K Kits vary in their contents, but generally contain a camshaft, a set of lifters, valve springs, retainers, locks, valve seals, timing set, decals and instructions. Check description for more accurate listing of kit contents.
- The Computer Controlled grind family includes grinds for both stock and modified EFI systems, with a wide variety of stages for significant power gains.
- Designed for throttle body injected and tuned port injected engines.
- Fits '87+ Chevrolet 262/4.3L V6 w/o Balance Shaft
- Made in USA
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 5.00 x 26.00 x 10.50 Inches
See On Amazon #18
COMP Cams 12-506-5 Tight Lash 259/262 Solid Flat Cam for Chevrolet Small Block
Asin: B000V9GBV2 | Model: 12-506-5 | PartNumber: 12-506-5 | Ean: 0036584540267 | UPC: 036584540267
Great Performance.
Enhance Your Vehicle.
Backed By Manufacturer's Warranty.
Features
- Competition Cams a trusted industry leader
- Backed by manufacturer's Warranty
- Great Performance
- Enhance your vehicle
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.75 x 24.50 x 3.00 Inches | Weight: 8.56 pounds
See On Amazon #19
COMP Cams (925-1) 1.509" O.D. Dual Valve Spring
Asin: B00062Z9LC | Model: 925-1 | PartNumber: 925-1 | Ean: 0036584016151 | UPC: 036584016151
.650 Inch Maximum Lift.
Part Number: 925-1.
111 Pounds 1.900 Inches Seat Load And 388 Pounds 1.200 Inches Open Load Capacity.
Features
- 1.509 inches outside diameter, .697 inches inside diameter dual valve spring
- 111 pounds 1.900 inches seat load and 388 pounds 1.200 inches open load capacity
- .650 inch maximum lift
- Part number: 925-1
- See more on Amazon...
First Available: 08/31/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 0.10 x 6.00 x 4.00 Inches | Weight: 0.30 pounds
Warranty: 1 Year Limited
See On Amazon
Looking For Something Else?
Search