OTC 6470 Camshaft Sensor Synchronizer Tool for Select 1999 - 2007 Ford and Mercury Vehicles
Asin: B000RFDGF4 | Model: 6470 | PartNumber: 6470 | Ean: 0731413037535 | UPC: 731413037535
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Correctly Aligns Shaft And Housing For Insertion Into Engine Once Engine Has Been Rotated To Top Dead Center On The No. 1 Cylinder's Compression Stroke.
Same As Ford No. 303-630; Includes Instructions For Proper Use Of Tool.
For Use On: 1999-02 5.0L V8 Explorer/Mountaineer; 2004-07 3.9L V6 Freestar (Vin 6); 2004 3.9L V6 Monterey (Vin 6); 1999-04 3.8L V6 Mustang; 1999-03 3.8L V6 Windstar.
This High Quality Metal Tool Is A 'Must Have' For Ensuring Correct Installation Of The Cam Sensor Housing.
Features
- OTC Ford/Mercury Camshaft Sensor Synchronizer Tool
- This high quality metal tool is a 'must have' for ensuring correct installation of the cam sensor housing
- Correctly aligns shaft and housing for insertion into engine once engine has been rotated to top dead center on the no. 1 cylinder's compression stroke
- For use on: 1999-02 5.0L V8 Explorer/Mountaineer; 2004-07 3.9L V6 Freestar (VIN 6); 2004 3.9L V6 Monterey (VIN 6); 1999-04 3.8L V6 Mustang; 1999-03 3.8L V6 Windstar
- Same as Ford No. 303-630; includes instructions for proper use of tool
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 1.40 x 7.70 x 4.20 inches | Weight: 0.35 Pounds
Warranty: Limited lifetime warranty
See On Amazon Similar To OTC 6470 Camshaft Sensor Synchronizer
#1
OTC 6024 Crankshaft Positioning Tool for Ford, Black
Asin: B000F5ECRM | Model: 6024 | PartNumber: 6024 | Ean: 0731413032554, 0799621067768 | UPC: 799621067768, 731413032554
Preventing Timing Misalignment On These 'Interference' Design Ford Engines Is Critical As Valves Will Contact Pistons If Timing Chain Is Installed In An Incorrect Position, Resulting In Severe Damage.
Otc Recommends (But Does Not Require) That The No. 6024 Crankshaft Alignment Tool Be Used With Nos. 6009 And 6020 Camshaft Alignment Tools To Safeguard Alignment When Servicing Cams Or Chains.
Simply Install Crankshaft Positioning Tool Over Crankshaft Snout (Aligning Crankshaft Woodruff Key With Keyway On Tool) And Engine Front Cover Alignment Dowel To Correctly Position Crank At Tdc.
Handy Tool Prevents Accidental Movement Of The Crankshaft When Doing Camshaft Or Timing Chain Service Or Installation On These 'Interference' Engines.
Features
- OTC Crankshaft Positioning Tool for use on 1993 and newer Ford 4.2L V6; 4.6L 2 valve and 4.6L 4-valve V8, 5.4L V8, and 6.8L V10 engines - same as Ford No. 303-448
- Handy tool prevents accidental movement of the crankshaft when doing camshaft or timing chain service or installation on these 'interference' engines
- Preventing timing misalignment on these 'interference' design Ford engines is critical as valves will contact pistons if timing chain is installed in an incorrect position, resulting in severe damage
- Simply install crankshaft positioning tool over crankshaft snout (aligning crankshaft woodruff key with keyway on tool) and engine front cover alignment dowel to correctly position crank at TDC
- OTC recommends (but does not require) that the No. 6024 Crankshaft Alignment Tool be used with Nos. 6009 and 6020 Camshaft alignment tools to safeguard alignment when servicing cams or chains
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.50 x 7.75 x 4.25 Inches | Weight: 0.70 Pounds
Warranty: LIFETIME
See On Amazon #2
OTC (6477) Camshaft Holding Tool for Ford , Black
Asin: B000K2KZIU | Model: 6477 | PartNumber: 6477 | Ean: 0731413037603 | UPC: 731413037603
1997 - 2002 5.4L V8 Econoline Expedition And F-Series Truck.
Same As Ford Number 303-557 T96t-6256-B.
1997 - 2002 6.8L V10 Econoline And 1998 - 2002 5.4L V8 Lincoln Navigator-R.
1997 - 2002 4.6L Windsor V8 Econoline And F-Series Truck.
Features
- Cam Tools ensure correct cam timing when servicing timing belts chains head gaskets or other valve train repairs
- 1997 - 2002 4.6L Windsor V8 Econoline and F-Series Truck
- 1997 - 2002 5.4L V8 Econoline Expedition and F-Series Truck
- 1997 - 2002 6.8L V10 Econoline and 1998 - 2002 5.4L V8 Lincoln Navigator-r
- Same as Ford number 303-557 T96T-6256-B
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.00 x 11.00 x 6.50 Inches | Weight: 1.00 Pounds
Warranty: Limited lifetime warranty
See On Amazon #3
OTC Tools 5882 Cam Gear Alignment Tool for Detroit Diesel Series 60 Engines
Asin: B07ZRPKZVV | Model: 5882 | PartNumber: 5882 | Ean: 0731413590375 | UPC: 731413590375
For Use On Detroit Diesel Series 60 Engines.
Similar To J-45946; Made In The Usa.
Crafted From High-Grade Materials To Ensure Quality Performance Over The Lifetime Of The Tool.
Pin On The Tool Fits Into The Cam Timing Hole For Proper Alignment.
Features
- OTC's Cam Gear Alignment Tool is used to properly align the cam gear during camshaft assembly installation
- Pin on the tool fits into the cam timing hole for proper alignment
- For use on Detroit Diesel Series 60 engines
- Crafted from high-grade materials to ensure quality performance over the lifetime of the tool
- Similar to J-45946; Made in the USA
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 6.00 x 10.00 x 8.00 inches
Warranty: Per Contract with Amazon
See On Amazon #4
OTC Tools 5884 Cam Gear Retaining Tool for Detroit Diesel Series 60 Engines
Asin: B07ZRQ9KFV | Model: 5884 | PartNumber: 5884 | Ean: 0731413590443 | UPC: 731413590443
Tool Installs Into The Gear Case, Engaging One Of The Lightening Holes In The Camshaft Drive Gear.
Similar To J-35652-B; Made In The Usa.
Uses Two Of The Engine's Existing Access Cover Bolts To Secure The Tool To The Gear Case.
This Tool Is Used To Securely Hold The Cam Gear Stationary While Removing/Installing The Cam Gear Retaining Bolt Without Damage.
Features
- OTC Cam Gear Retaining Tool for Detroit Diesel Series 60 engines Uses two of the existing access cover bolts (not included) to secure the tool to the gear case
- This tool is used to securely hold the cam gear stationary while removing/installing the cam gear retaining bolt without damage
- Tool installs into the gear case, engaging one of the lightening holes in the camshaft drive gear
- Uses two of the engine's existing access cover bolts to secure the tool to the gear case
- Similar to J-35652-B; Made in the USA
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 5.00 x 7.00 x 5.00 inches
Warranty: Per Contract with Amazon
See On Amazon #5
OTC (6686) Cam Tool Set - GM NorthStar V8
Asin: B000TRJ7US | Model: 6686 | PartNumber: 6686 | Ean: 0731413417450 | UPC: 731413417450
Cylinder Heads And Valve Trains Tend To Wear Out Somewhere Between 80000 To 120000 Miles.
Over One Million Northstar V8s Have Been Sold Since 1993.
Features
- Kit is indispensable for quickly and correctly servicing GM NorthStar 4.0L and 4.6L V8 engines
- Over one million NorthStar V8s have been sold since 1993
- Cylinder heads and valve trains tend to wear out somewhere between 80000 to 120000 miles
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 4.80 x 26.30 x 15.90 inches | Weight: 5.10 Pounds
Warranty: Limited lifetime warranty
See On Amazon #6
OTC 6469 Camshaft Sensor Synchronizer Tool for Select 1997 - 2008 Ford and Mercury Vehicles
Asin: B000HTNNX0 | Model: 6469 | PartNumber: 6469 | Ean: 0731413037528 | UPC: 731413037528
Correctly Aligns Shaft And Housing For Insertion Into Engine Once Engine Has Been Rotated To Top Dead Center On The No. 1 Cylinder's Compression Stroke.
Same As Ford No. 303-562 (T96t-12200-A); Includes Instructions For Proper Use Of Tool.
For: 1997 3.8L V6 Cougar/Thunderbird; 1997-08 4.2L V6 Econoline, F-Series Truck; 1996-98 5.0L V8 Explorer/Mountaineer; 2004-07 4.2L V6 Freestar/Monterey; 1996-98 3.8L V6 Mustang/Windstar.
This High Quality Metal Tool Is A 'Must Have' For Ensuring Correct Installation Of The Cam Sensor Housing.
Features
- OTC Ford/Mercury Camshaft Sensor Synchronizer Tool
- This high quality metal tool is a 'must have' for ensuring correct installation of the cam sensor housing
- Correctly aligns shaft and housing for insertion into engine once engine has been rotated to top dead center on the no. 1 cylinder's compression stroke
- For: 1997 3.8L V6 Cougar/Thunderbird; 1997-08 4.2L V6 Econoline, F-Series Truck; 1996-98 5.0L V8 Explorer/Mountaineer; 2004-07 4.2L V6 Freestar/Monterey; 1996-98 3.8L V6 Mustang/Windstar
- Same as Ford No. 303-562 (T96T-12200-A); includes instructions for proper use of tool
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 0.80 x 7.70 x 4.20 inches | Weight: 0.30 Pounds
Warranty: Limited lifetime warranty
See On Amazon #7
OTC 6472 Camshaft Sensor Synchronizer Tool for Select 1995 - 1998 Ford and Mercury Vehicles
Asin: B000VNFUJ2 | Model: 6472 | PartNumber: 6472 | Ean: 0731413037559 | UPC: 731413037559
Correctly Aligns Shaft And Housing For Insertion Into Engine Once Engine Has Been Rotated To Top Dead Center On The No. 1 Cylinder's Compression Stroke.
Same As Ford No. 303-529 (T95t-12200-A); Includes Instructions For Proper Use Of Tool.
For Use On The Following Vehicles: 1995-97 3.0L V6 Aerostar, Ranger, Windstar; 1996-98 4.0L V6 Aerostar, Explorer, Ranger; 1996-97 3.0L V6 2V Sable, Taurus (Not For 3.0L Dohc Engines).
This High Quality Metal Tool Is A 'Must Have' For Ensuring Correct Installation Of The Cam Sensor Housing.
Features
- OTC Ford/Mercury Camshaft Sensor Synchronizer Tool
- This high quality metal tool is a 'must have' for ensuring correct installation of the cam sensor housing
- Correctly aligns shaft and housing for insertion into engine once engine has been rotated to top dead center on the no. 1 cylinder's compression stroke
- For use on the following vehicles: 1995-97 3.0L V6 Aerostar, Ranger, Windstar; 1996-98 4.0L V6 Aerostar, Explorer, Ranger; 1996-97 3.0L V6 2V Sable, Taurus (not for 3.0L DOHC engines)
- Same as Ford No. 303-529 (T95T-12200-A); includes instructions for proper use of tool
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.30 x 7.40 x 4.20 Inches | Weight: 0.30 pounds
Warranty: Limited lifetime warranty
See On Amazon #8
OTC 6473 Camshaft Sensor Synchronizer Tool for Select 1998 - 2008 Ford and Mercury Vehicles
Asin: B000RFDGEK | Model: 6473 | PartNumber: 6473 | Ean: 0731413037566 | UPC: 731413037566
Correctly Aligns Shaft And Housing For Insertion Into Engine Once Engine Has Been Rotated To Top Dead Center On The No. 1 Cylinder's Compression Stroke.
Same As Ford No. 303-589; Includes Instructions For Proper Use Of Tool.
For Use On The Following Vehicles: 1998-08 3.0L V6 Ranger; 1998-05 3.0L V6 Sable, Taurus (Vin U); 1998-06 3.0L V6 Sable, Taurus (Vin Z); 1998-03 3.0L V6 Windstar.
This High Quality Metal Tool Is A 'Must Have' For Ensuring Correct Installation Of The Cam Sensor Housing.
Features
- OTC Ford/Mercury Camshaft Sensor Synchronizer Tool
- This high quality metal tool is a 'must have' for ensuring correct installation of the cam sensor housing
- Correctly aligns shaft and housing for insertion into engine once engine has been rotated to top dead center on the no. 1 cylinder's compression stroke
- For use on the following vehicles: 1998-08 3.0L V6 Ranger; 1998-05 3.0L V6 Sable, Taurus (VIN U); 1998-06 3.0L V6 Sable, Taurus (VIN Z); 1998-03 3.0L V6 Windstar
- Same as Ford No. 303-589; includes instructions for proper use of tool
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 0.20 x 7.00 x 4.50 inches | Weight: 0.30 Pounds
Warranty: Limited lifetime warranty
See On Amazon #9
OTC 6481 Camshaft Holding Tool for Ford
Asin: B000RFDGGI | Model: 6481 | PartNumber: 6481 | Ean: 0731413037641 | UPC: 731413037641
This Tool Is Used With Number 6480 Ford Camshaft Holding Tool Adapter.
Same As Ford Number 303-577 T97t-6256-C.
1997 - 2002 40L Sohc V6 Ford Explorer And Mercury Mountaineer.
Features
- Cam Tools ensure correct cam timing when servicing timing belts chains head gaskets or other valve train repairs
- 1997 - 2002 40L SOHC V6 Ford Explorer and Mercury Mountaineer
- This tool is used with number 6480 Ford Camshaft Holding Tool Adapter
- Same as Ford number 303-577 T97T-6256-C
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 0.70 x 11.20 x 6.10 Inches | Weight: 110.00 ounces
Warranty: Limited lifetime warranty
See On Amazon #10
OTC (6475) Crankshaft TDC Timing Pin for Ford
Asin: B002YKI7KO | Model: 6475 | PartNumber: 6475 | Ean: 0731413037580 | UPC: 731413037580
Same As Ford Number 303-574 T97p-6000-A.
1997 - 2002 Ford Contour/Mercury Mystique With 2.0L 4 Cyl Dohc Zetec Engine With Variable Cam Timing.
Features
- Cam Tools ensure correct cam timing when servicing timing belts chains head gaskets or other valve train repairs
- 1997 - 2002 Ford Contour/Mercury Mystique with 2.0L 4 cyl DOHC Zetec engine with variable cam timing
- Same as Ford number 303-574 T97P-6000-A
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 0.30 x 7.40 x 3.30 inches | Weight: 0.19 pounds
Warranty: Limited lifetime warranty
See On Amazon
Looking For Something Else?
Search