Precision 12mm End Mill 4 Flute HRC50 Carbide End Mill Machinery Tungsten Steel Milling Cutter End Mill Machine Cutting Tool Strong (Cutting Edge Diameter: 12X12DX75L 4F, Dimensions : 5PCS)
Asin: B000TLZ9HO | Ean: 7393825052075
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
Weight: 0.00 pounds
See On Amazon Similar To Precision 12mm End Mill 4
#1
SpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length
Asin: B07NWJ49TC | Model: P2BL-R1/8 | PartNumber: P2BL-R1/8
For Cnc,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy Etc.
End Mill Bits Are Suitable For Side Milling, End Milling, Finish Machining, Etc..
The Route Bit Suit For Cnc Router And Makita, Bosch, And Any Brand Plunge Router With 1/4" Collet.
Round Top With 2-Flute, Material: Hrc55 Carbide With Tialn Coated.
Features
- Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
- Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
- For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
- The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4 Collet
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
Dimensions: 0.04 x 3.00 x 0.25 inches
See On Amazon #2
SpeTool 2 Flutes 1/4 inch Shank, Extra Long(3 inches) Carbide End Mill TiAlN Coated HRC55 Spiral UpCut CNC Bits
Asin: B07NWGM4DJ | Model: P2EL-D1/4 | PartNumber: P2EL-D1/4
For Cnc,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy Etc.
End Mill Bits Are Suitable For Side Milling, End Milling, Finish Machining, Etc..
The Route Bit Suit For Cnc Router And Makita, Bosch, And Any Brand Plunge Router With 1/4" Collet.
Flat Top With 2-Flute, Material: Hrc55 Carbide With Tialn Coated.
Features
- Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
- Flat Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
- For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
- The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4 Collet
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
Dimensions: 0.04 x 3.00 x 0.25 Inches
See On Amazon #3
WEXWE Tools DLC Series Carbide Square End Mill, Diamond-Like Coating, End Mill for Aluminum, Copper, Magnesium Alloys, High Silicon Aluminum, Composite Materials,3 Flute,1/4 Shank (.25(1/4)", 2pcs)
Asin: B09WYZMKQQ | Model: 1213 | PartNumber: 1213 | Ean: 0774980046227 | UPC: 774980046227
Manufacturing:Five-Axis High Precision Grinding Machine, Keep The Carbide Router Bits Stable And Controllable.
Design: Cutting Edge And The U Groove Make The Milling Bits Sharper And Efficiency, High Feed Rating And Greatly Surface Finishing.
Quality Control:Each Milling Bit Will Be Tested On The Detecting Instrument And Laser A Code.
Material:Hrc62 Ultrafine Grain Tungsten Carbide, Toughness And Hardness And Wear Resistance.
Features
- COATING :All end mill set with Diamond-Like Coating surface hardness:HV7000, Low coefficient of friction( =0.08-0.15) Strong adhesion resistance
- MATERIAL:HRC62 ultrafine grain tungsten carbide, toughness and hardness and wear resistance
- MANUFACTURING:Five-axis high precision grinding machine, keep the carbide router bits Stable and controllable
- QUALITY CONTROL:Each milling bit will be tested on the detecting instrument and laser a code
- DESIGN: Cutting edge and the U groove make the milling bits sharper and efficiency, high feed rating and greatly surface finishing
- See more on Amazon...
Brand: WEXWE | Manufacturer: WEXWE
See On Amazon #4
SpeTool 5PCS O Flute (Single Flute) End Mill Set 1/4" Shank, Carbide Spiral Upcut Router Bit for CNC Router Milling Cutter
Asin: B0B8HCXC4Q | Model: W03001 | PartNumber: W03001
Applicable Matiarials. Suitable For A Variety Of Materials, Acrylic, Plastic, Aluminum, Copper, And Wood; Used For Carving, Cutting, Slotting, Milling, Hollow Cutting;.
Durable And Precise. Single Flute Router Bits, High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
Wide Application. Perfect For Cnc Routing, Hobbyist Projects, And Sign Making With Plastic And Non-Ferrous Materials..
Unique Design. O-Flute Design Spiral Router Bit Ensures Efficient Chip Removal, Reducing Clogging, Providing Smooth Cutting Performance, And Extending Tool Life;.
Features
- SPECIFICATION. 5pcs Spiral Router Bits 1" cutting length; 1/4" cutting diameter; 1/4" shank; 2-1/2" overall length, can be used on routers with 1/4" collect;
- UNIQUE DESIGN. O-Flute design spiral router bit ensures efficient chip removal, reducing clogging, providing smooth cutting performance, and extending tool life;
- APPLICABLE MATIARIALS. Suitable for a variety of materials, acrylic, plastic, aluminum, copper, and wood; Used for Carving, Cutting, Slotting, Milling, Hollow Cutting;
- WIDE APPLICATION. Perfect for CNC routing, hobbyist projects, and sign making with plastic and non-ferrous materials.
- DURABLE AND PRECISE. Single flute router bits, high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #5
AUTOTOOLHOME 1/4 inch HSS 4 Flutes End Mills Milling Cutter End Drill Bit Straight Shank Pack of 2
Asin: B01099VUQY | Model: ZH0099 | PartNumber: ZH0099 | Ean: 0714046431246 | UPC: 714046431246
Cutting Edge Design: The Bottom Of End Mill Bits Is U-Shaped Groove Design, Large Front Angle Effectively Reduces Cutting Resistance, Sharp And Durable, Convenient For Chip Removal, Further Improve Machining Efficiency..
Package Content : 2 X 1/4 Inch End Mill.
Strong And Durable:The End Mill Bits Are Made From Ultra-Fine Tungsten Steel Bar, With High Bending Resistance And Abrasion Resistance, Exclusive To High Hardness, High Speed Cutting Applications..
Application: End Mill Bits Are Suitable For Side Milling, End Milling, Finish Machining, Etc. Apply To Carbon Steel, Alloy Steel, Die Steel, Tool Steel, Cast Iron, Titanium, Aluminum, Etc..
Features
- HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32 with high speed, reduce changing times and improve the production efficiency.
- APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
- CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
- STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
- Package Content : 2 x 1/4 inch End Mill
- See more on Amazon...
Brand: AUTOTOOLHOME | Manufacturer: JYC International Trade Co., Ltd.
See On Amazon #6
ACCUCUT I4KES 1/8 Carbide Square End Mill- 4 Flute Milling Bit Set for Steel, Forge Steel, Hardened Steel, Copper, Alloys & Materials < HRC 50 - AlTiN Coating CNC Router Bit, 45 Degree Helix (5 pcs)
Asin: B09HRR4SQV | Ean: 4711232489100
Altin Coating: It Is A Strong Coating That's Coated At Temperatures Between 450°C To 475°C. It Is Able To Provide High Wear Resistance, Lubricity, Exceptional Oxidation Resistance, Extreme Hardness, And Excellent Abrasive Wear Resistance. It Has Higher Reliability In Dry Operations, Heat Resistance, Hard Machining, And The Resistance Can Be Reduced..
4 Flute Cutter: It Has Uniqe Geometry And Strong Cutting Edge. 4 Flute Is Great For Speedy Cutting. Ideal For Planar, Step, Groove, Forming Surface While The 45 Degree Helix Design Can Perform Smooth Surface Finish, Better Chip Removal Control Than Those With Lower Helix Degree..
Solide Carbide: The Material Is European Origin Ultra Fine Grain Carbide. We Use The Highest Quality Tungsten Carbide Powders And Adjust The Ratio Of Tungsten Carbide And Cobalt To Meet The Ideal Hardness. It Is Stable And Has Excellent Wear-Resistance Of The Material. It Significantly Enhances The Tool's Lifespan And Keeps The End Mill Sharp. It Also Helps Keep The Surface Quality Of Your Work-Piece At The Best Level Possible..
Features
- General Usage: Applicable with copper, copper alloys, cast iron, steels, carbon steels, alloy steels, pre-hardened steels, hardened steels, and stainless steel materials. Best use for materials HRC less than 50.
- Solide Carbide: The material is European origin ultra fine grain carbide. We use the highest quality tungsten carbide powders and adjust the ratio of tungsten carbide and cobalt to meet the ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.
- AlTiN Coating: It is a strong coating that's coated at temperatures between 450 C to 475 C. It is able to provide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced.
- 4 Flute Cutter: It has uniqe geometry and strong cutting edge. 4 flute is great for speedy cutting. Ideal for planar, step, groove, forming surface while the 45 degree helix design can perform smooth surface finish, better chip removal control than those with lower helix degree.
- See more on Amazon...
Brand: A ACT ACCU-CUT | Manufacturer: A ACT ACCU-CUT
Dimensions: 2.17 x 2.70 x 0.55 Inches
See On Amazon #7
ASNOMY 10pcs 4-Flute End Mill Set, Metric CNC Milling Cutter Drill Bits Router Bits Cutter Tool Set for Wood Aluminum Steel Titanium, Straight Shank 2-12mm
Asin: B089VWBZY2 | Model: AS0087 | PartNumber: AS0087 | Ean: 0747045238394 | UPC: 747045238394
Widely Application Cnc End Mill: Can Used On Metal Processing, Cnc Machining And Engineering Using, Suitable For Aluminium, Cast Iron, Copper, Magnesium Alioy, Plastics, Wood, Etc.
Satisfaction: Asnomy Aims To Provide High-Grade Products And Customer Service To All Customers. Any Problems, Just Contact Us And Our After-Sale Team Will Solve Your Problems Asap..
Easy To Use: This End Mill Bits Usually Used To Be Assembled On Milling Machine And Used For Profiling, Shoulder Milling, Finishing Operations, General Purpose Machining Of Both Ferrous And Nonferrous Materials.
2-12Mm End Mill Set: This End Mill Set Includes 10 Diameter Sizes Of 2Mm, 3Mm, 4Mm, 5Mm, 6Mm, 7Mm, 8Mm, 9Mm, 10Mm, 12Mm, Can Satisfy All Your Different Needs..
Features
- Top Quality Made from high speed steel(HSS), high abrasion resistance, obtain accuracy, high-speed cutting for the high hardness
- 2-12mm End Mill Set: This end mill set includes 10 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm, can satisfy all your different needs.
- Widely Application CNC End Mill: Can Used on metal processing, CNC machining and engineering using, Suitable for aluminium, cast iron, copper, magnesium alioy, plastics, wood, etc
- Easy To Use: This End Mill Bits usually used to be assembled on milling machine and used for profiling, shoulder milling, finishing operations, general purpose machining of both ferrous and nonferrous materials
- Satisfaction: ASNOMY aims to provide high-grade products and customer service to all customers. Any problems, just contact us and our after-sale team will solve your problems ASAP.
- See more on Amazon...
Brand: ASNOMY | Manufacturer: ASNOMY
See On Amazon #8
SainSmart Genmitsu 10Pcs Nano Blue Coat Flat Nose End Mill CNC Router Bits, 1/8" Shank Spiral Upcut Single 1 Flute End Mill Set (3.175 x 17 x 38mm)
Asin: B07P84YFS9 | Ean: 4897093841346
Advantage: Sharp Cutting Edge, Milling, Hole And Plate Edge, Clean Surface, Neat, No Glitches..
Application: Perfect For 3D Relief Sculpturing, Cutting, Engraving, Slotting, Milling, Etc. To Learn More About How To Choose The Right Bits To Meet Your Needs, Please Find The Comparison Chart (Cnc Bits Buying Guide) At The Product Guides And Documents Section Below..
Suitable Material: Nylon, Resin, Abs, Acrylic, Pvc, Mdf, Hardwood..
Cutting Edge Diameter (Ced): 3.175Mm (1/8")Approx..
Features
- Number of Flutes: 1.
- Cutting Edge Diameter (CED): 3.175mm (1/8)approx.
- Advantage: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- Suitable Material: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood.
- Application: Perfect for 3D relief sculpturing, cutting, engraving, slotting, milling, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
- See more on Amazon...
Brand: SainSmart | Manufacturer: Genmitsu
Dimensions: 0.04 x 1.50 x 0.12 Inches | Weight: 0.00 pounds
See On Amazon #9
8pcs 2-12mm CNC Square Nose End Mills,Carbide Tungsten Steel 4 Fultes Milling Cutter, Router Bits Rotary Bits Tool Straight Shank 2-12mm
Asin: B091DN8B1M | Model: 01 | PartNumber: 01 | Ean: 8414740896717
Brand: Hunricho | Manufacturer: Home of quality tools
See On Amazon #10
SpeTool 5Pcs 2-Flute Square Nose Carbide End Mill 1/8 Inch Router Bit with 1/8 inch Shank CNC Machine Tools, TiAlN Coated
Asin: B07S4G47XF | Model: P2E-1/8-5Pcs | PartNumber: P2E-1/8-5Pcs
Premium Quality. Made Of High Quality Tungsten Carbide, Precision Edge-Grinding Technology; Long Service Life, Not Easy To Break; Excellent Cutting Results And Enhanced Productivity.
Package Include. 5 Pieces High Quality End Mill Pack In A Individual Plastic Box.
Wide Application. For Cnc, Engraving Machine, Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy Etc; Suitable For Side Milling, End Milling, Finish Machining, Etc..
Specification. Flat Top, 2-Flute, Hrc55 With Tialn Coated, Use 1/8" Collet.
Features
- ENDMILL SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length
- SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8 collet
- PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology; long service life, not easy to break; excellent cutting results and enhanced productivity
- WIDE APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc; suitable for side milling, end milling, finish machining, etc.
- PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
Dimensions: 0.04 x 1.50 x 0.13 Inches
See On Amazon
Looking For Something Else?
Search