Stomp Grip Ridge Tank Pad (CLEAR)
Asin: B001AWPF2K | Ean: 0785548016941 | UPC: 785548016941
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.More Contact Between The Bike And Rider.Reduced Fatigue And Arm Pump..
Developed To Meet Stomp's Exacting Specs.Paint And Graphics Remain Visible Through The Traction Pads.Non-Abrasive Material..
More Lower Body Grip And Less Upper Body Stress.Ultra-Clear Proprietary Elastomer Material..
They Are Custom Designed And Engineered To Fit Tank Sides, Tank Covers, Tank Tops, Tank Rear Sections, Frames, And More.Increased Bike Control..
Features
- STOMPGRIP Traction Pads for streetbikes make gripping your ride incredibly easy, and therefore require less energy to hold on to the bike.
- They are custom designed and engineered to fit tank sides, tank covers, tank tops, tank rear sections, frames, and more.Increased bike control.
- More contact between the bike and rider.Reduced fatigue and arm pump.
- More lower body grip and less upper body stress.Ultra-clear proprietary elastomer material.
- Developed to meet STOMP's exacting specs.Paint and graphics remain visible through the traction pads.Non-abrasive material.
- See more on Amazon...
Brand: Stompgrip | Manufacturer: Stomp Grip
Dimensions: 0.10 x 10.50 x 6.50 inches | Weight: 0.14 Pounds
See On Amazon Similar To Stomp Grip Ridge Tank Pad
#1
Progrip PG5008CARBON '5008 Series' Carbon Tank Pad, Carbon Fiber
Asin: B004I9MD2M | Model: PG5008CARBON | PartNumber: PG5008CARBON | Ean: 0801766001009, 0785422868383 | UPC: 801766001009, 785422868383
Three-Piece Design For Easy Install.
Approximately 8" Long (210 Mm).
Sleek, Segmented Design For Better Fit And Better Adhesion.
Features
- Long lasting adhesive tank protector in thermal molded resin for better protection
- Sleek, segmented design for better fit and better adhesion
- Three-piece Design for easy install
- Approximately 8 long (210 mm)
- See more on Amazon...
First Available: 03/28/2012
Brand: Progrip | Manufacturer: Progrip
Dimensions: 0.25 x 11.00 x 7.00 inches | Weight: 0.00 Pounds
See On Amazon #2
XCMAN 4 Layer-Cone Studs 7.87 Inch Dia Aluminum Snowboard Stomp Pad - 9pcs
Asin: B08CCSDHKY | Ean: 0724268525753 | UPC: 724268525753
Size:Dia 7.87Inch(20Mm) 4 Layer-Cone Studs,The Size Of This Spike Big Enough To Provide Enough Grid And Yet It Could Still Fit Nicely On The Board..
Quick & Easy Application:3M Peel And Stick Adhesives.Nice Pcs Per Pack..
Modular And Configurable Mat Stomp:9Pcs Spikes On Stomp Pad Provides Extra Grip And Perfect Traction, 9Pcs Configurable Pieces And Moved To Perfect Traction, Where You Need It..
Maximum Traction:The Molded Spike Design Creates Extra Grip For Maximum Traction When Out On The Slopes..
Features
- Snowboard Aluminum Snowboard Stomp Pad Surface treatment:anodic oxidation.It also comes with 3M adhesive so it sticks really well. The raised ridge and spot works really well in providing extra traction and scraping the snow off your boot sole.
- MAXIMUM TRACTION:The molded spike design creates extra grip for maximum traction when out on the slopes.
- Size:DIA 7.87inch(20mm) 4 Layer-Cone Studs,The size of this spike big enough to provide enough grid and yet it could still fit nicely on the board.
- MODULAR AND CONFIGURABLE MAT STOMP:9pcs spikes on stomp pad provides extra grip and perfect traction, 9pcs configurable pieces and moved to perfect traction, where you need it.
- QUICK & EASY APPLICATION:3M Peel and stick adhesives.Nice pcs per pack.
- See more on Amazon...
Brand: XCMAN | Manufacturer: XCMAN(XIAMEN)INDUSTRY&TRADE CO.,LTD
See On Amazon #3
STOMPGRIP Premium Motorcycle Tank Protector | Icon | Stock Collection | 3D Design | Universal Fit | Black
Asin: B0CJF1NC4D | Ean: 0840187511025 | UPC: 840187511025
Easy Installation: For Your Convenience, We Provide Product Installation Videos That Offer Easy To Follow, Step-By-Step Instructions With Tips And Tricks To Make Installation Easy. Just Follow The Installation Instructions, It Usually Takes 10-15 Minutes To Complete A Tank Protector Installation..
Made In The Usa: Since 1994 All Stompgrip Products Have Been Manufactured In Its Huntington Beach, California Usa Warehouse And Shipped Worldwide..
Trust & Confidence: All Products Are Same-Day, Made-To-Order, When Ordering Direct From The Manufacturer. Always Look For “Sold By Stompgrip” To Ensure You Are Buying The Freshest Adhesives Available As Adhesives Are Perishable And Have A Limited Shelf Life. Always Confirm That The Manufactured: Month / Year Stamp On The Back Of The Package Is Within The Warranty Time Frame For Your Purchase Prior To Installation. All Products Are Covered By Stompgrip's Manufacturer Warranty..
3D Design & Function: Stompgrip’S Tank Protectors Are 3D Cad Designed, And Injection Molded In Unique Shapes With Multiple Traction Profiles Available To Choose From Which Provide Varying Levels Of Grip And Protection. Stompgrip Tank Protectors Have A Unique, Rounded-Edge Design To Prevent Peeling Off Tanks Under Extreme Use Versus Being Die Cut With Rough Edges That Can Catch Or Snag On Riding Gear..
Features
- PREMIUM QUALITY MOTORCYCLE TANK PROTECTORS: Stompgrip's premium motorcycle Tank Protectors are designed to protect the middle of your tank from scratches and chips caused by zippers, buttons and belt buckles. All Tank Protectors are manufactured using the highest quality plastics formulated to meet our customers needs combined with the strongest 3M adhesives available.
- 3D DESIGN & FUNCTION: Stompgrip s Tank Protectors are 3D CAD designed, and injection molded in unique shapes with multiple traction profiles available to choose from which provide varying levels of grip and protection. Stompgrip Tank Protectors have a unique, rounded-edge design to prevent peeling off tanks under extreme use versus being die cut with rough edges that can catch or snag on riding gear.
- EASY INSTALLATION: For your convenience, we provide product installation videos that offer easy to follow, step-by-step instructions with tips and tricks to make installation easy. Just follow the installation instructions, it usually takes 10-15 minutes to complete a Tank Protector installation.
- TRUST & CONFIDENCE: All products are same-day, made-to-order, when ordering direct from the manufacturer. Always look for Sold by STOMPGRIP to ensure you are buying the freshest adhesives available as adhesives are perishable and have a limited shelf life. Always confirm that the MANUFACTURED: MONTH / YEAR stamp on the back of the package is within the warranty time frame for your purchase prior to installation. All products are covered by Stompgrip's manufacturer warranty.
- MADE IN THE USA: Since 1994 all Stompgrip products have been manufactured in its Huntington Beach, California USA warehouse and shipped worldwide.
- See more on Amazon...
Brand: Stompgrip | Manufacturer: Stompgrip
Dimensions: 10.25 x 7.00 x 0.50 inches
See On Amazon #4
Progrip PG5005CR '5005CR Series' Carbon Tank Pad
Asin: B000KKBO82 | Model: PZ5005CA | PartNumber: PZ5005CA | Ean: 0801766064028 | UPC: 801766064028
First Available: 03/28/2012
Brand: Progrip | Manufacturer: Progrip
Dimensions: 0.40 x 11.00 x 7.00 inches | Weight: 0.10 Pounds
Warranty: Manufacturer warranty.
See On Amazon #5
PEUTIER 2Sets of 6pcs Stomp Pad, Clear Anti-Skidding Snowboard Stomp Pads Snowboard Grip Pad for Snowboarding (Transparent)
Asin: B0CN2L9KGQ | Model: 22341 | PartNumber: 22341
Flexible Design: The Anti-Skidding Snowboard Stomp Pad Is Especially Separated Into 3 Pieces, And You Can Freely Adjust The Distance Among Them According To Your Needs, Very Convenient And Thoughtful..
How To Use: Coming With 2 Sets Of Double-Sided Adhesive Tape, It Is Easy To Install: 1. Use The Alcohol To Clean The Ski And Wait It Dry; 2. Use A Hair Dryer To Heat The Tape For 2-3 Minutes, Then Stick It In A Warm Room Overnight To Maximize Its Stickiness. 3. Peel Off The Protective Film Of The Tape And Paste It On The Flat Side Of The Stomp Pad According To Its Shape; 4. Peel Off The Film On The Other Side And Stick It On The Ski, And Please Place The Ski Indoors For 24 Hours..
Practicality: The Stomp Pad Has Protruding Spikes, Which Can Offer Nice Grip And Traction. Very Practical Accessory For Snowboarding..
Premium Material: The Stomp Pad Is Made Of Premium Plastic Material, Sturdy And Not Easy To Break Or Deform, Providing A Long Service Time..
Features
- Package Content: You will receive 2 sets of 6pcs snowboard stomp pads with two sets of tape, measuring about about 111x126 mm/ 4.3 x4.96 inches, fit for most snowboards. Ideal accessory for snowboarding in winter.
- Premium Material: The stomp pad is made of premium plastic material, sturdy and not easy to break or deform, providing a long service time.
- Flexible Design: The anti-skidding snowboard stomp pad is especially separated into 3 pieces, and you can freely adjust the distance among them according to your needs, very convenient and thoughtful.
- Practicality: The stomp pad has protruding spikes, which can offer nice grip and traction. Very practical accessory for snowboarding.
- How to Use: Coming with 2 sets of double-sided adhesive tape, it is easy to install: 1. use the alcohol to clean the ski and wait it dry; 2. Use a hair dryer to heat the tape for 2-3 minutes, then stick it in a warm room overnight to maximize its stickiness. 3. Peel off the protective film of the tape and paste it on the flat side of the stomp pad according to its shape; 4. Peel off the film on the other side and stick it on the ski, and please place the ski indoors for 24 hours.
- See more on Amazon...
Brand: PEUTIER | Manufacturer: PEUTIER
See On Amazon #6
Stomp Design 50-14-0001 Icon Profile Large Street Bike Tank Grips - Clear
Asin: B07R5M1S9G | Model: 50-14-0001 | PartNumber: 50-14-0001 | Ean: 0644978811963 | UPC: 644978811963
Result Is A Functional Traction That Has A Very Comfortable Feel On The Legs And Knees In Jeans, Regular Street Clothing And Leathers.
Made In The U.S.A..
Profile Provides 70% To 75% Of Traction Properties As Compared To The Volcano Profile.
Provides The Beneficial Traction That Stompgrip Is Known For, But With A Lower Profile.
Features
- Icon design features a surface texture composed of an aesthetically-pleasing pattern using Stompgrip trademarked logo
- Provides the beneficial traction that Stompgrip is known for, but with a lower profile
- Result is a functional traction that has a very comfortable feel on the legs and knees in jeans, regular street clothing and leathers
- Profile provides 70% to 75% of traction properties as compared to the Volcano Profile
- Made in the U.S.A.
- See more on Amazon...
Brand: Stompgrip | Manufacturer: Stomp Design
Dimensions: 0.10 x 10.00 x 8.00 inches | Weight: 1.00 Pounds
See On Amazon #7
Stompgrip Motorcycle Traction Pads - STREET BIKE TANK GRIPS - VOLCANO - 0037 (Black)
Asin: B007D8BIP8 | Model: 55-10-0037B | PartNumber: 55-10-0037B | Ean: 0840187512107 | UPC: 840187512107
Features
- Ultra-clear proprietary elastomer material. Developed to meet STOMP's exacting specs. Aggressive volcano profile traction bumps. Paint and graphics remain visible through the traction pads. Non-abrasive material. Designed to wear down and be replaced like
- See more on Amazon...
Brand: Stompgrip | Manufacturer: Stompgrip
Dimensions: 11.50 x 14.50 x 0.50 Inches
Warranty: Manufacturer
See On Amazon #8
Stompgrip Motorcycle Traction Pads - Universal Sheet - Volcano Grip Pattern (Clear)
Asin: B085VMFVD8 | Ean: 0840187510349 | UPC: 840187510349
Brand: Stompgrip | Manufacturer: Stompgrip
Dimensions: 9.00 x 18.00 x 0.50 inches
See On Amazon #9
One Mfg Cupcake Snowboard Stomp Pad 5" x 4" - Lightweight, Anti-Slip, USA Made Traction
Asin: B0798MMDL3 | Model: ASCK | PartNumber: ASCK | Ean: 0022099746874 | UPC: 022099746874
Easy To Apply - We Only Use The Best Pressure Sensitive Adhesive, So Your Stomp Will Stay Stuck Down On Any Type Of Smooth Or Textured Top Sheet..
Made In The Usa - Developed, Tested And Manufactured In The Usa. We Also Do Our Best To Reduce Unnecessary Packaging. All Usa Made One Mfg Stomps Are Packaged Directly On A Recyclable Header Card Without No Exterior Packaging Film..
Instructions - Make Sure Board Is Clean, Dry And Warm. Test Place Stomp In Front Of Rear Binding, And Mark Corners With Pencil. Carefully Remove Backing Paper And Place The Stomp Pad. Press Down With Firm Pressure Over The Entire Pad. Let Dry Overnight..
You Can't Buy Happiness, But You Can Buy This 5" X 4" [ 13Cm X 10Cm ] Cupcake Stomp Pad - That Is Kind Of The Same Thing, Right? Cupcakes Are Muffins That Believe In Miracles. So In A World Of Muffins, Be A Cupcake!.
Features
- LIGHT WEIGHT, HiGH IMPACT, THERMOPLASTIC, SNOWBOARD STOMP PAD - Molded 7mm spikes provide great grip for boots, with a smooth finish that won't abrade or tear clothing or gloves when carrying your board.
- YOU CAN'T BUY HAPPINESS, BUT YOU CAN BUY THIS 5 x 4 [ 13cm x 10cm ] CUPCAKE STOMP PAD - That is kind of the same thing, right? Cupcakes are muffins that believe in miracles. So in a world of muffins, be a cupcake!
- EASY TO APPLY - We only use the best Pressure Sensitive Adhesive, so your stomp will stay stuck down on any type of smooth or textured top sheet.
- INSTRUCTIONS - Make sure board is clean, dry and warm. Test place stomp in front of rear binding, and mark corners with pencil. Carefully remove backing paper and place the stomp pad. Press down with firm pressure over the entire pad. Let dry overnight.
- MADE IN THE USA - Developed, tested and manufactured in the USA. We also do our best to reduce unnecessary packaging. All USA made One Mfg Stomps are packaged directly on a recyclable header card without no exterior packaging film.
- See more on Amazon...
Brand: ONEBALL
Weight: 0.15 Pounds
See On Amazon #10
XCMAN Snowboard Clear Spike Stomp Pad Anti-Slip,Provides Extra Grip and Pperfect Traction with 3M Adhesives 5.2 x 5.2 inch
Asin: B08CCVYP79 | Model: ACS-14-4-SnowFlake | PartNumber: ACS-14-4-SnowFlake | Ean: 0724268525760 | UPC: 724268525760
Quick & Easy Application:3M Peel,Stick Adhesives And A Adhesion Promoter That For Using To Increase The Bond Strength Of Snowboard Surface..
Big Size:The Size Of This Pad : 5.2 X 5.2 Inches, Big Enough To Provide Enough Grid And Yet It Could Still Fit Nicely On The Board..
Maximum Traction:The Molded Pyramid Spike Design Creates Extra Grip For Maximum Traction When Out On The Slopes..
Modular And Configurable Mat Stomp:18Pcs Pyramid Spikes On Stomp Pad Provides Extra Grip And Pperfect Traction, Easily Cut 4Pcs Configurable Pieces And Moved To Perfect Traction, Where You Need It..
Features
- Clear Pyramid Spike stomp pad has a transparent traction mat so the graphics of your snowboard won t be covered. It also comes with 3M adhesive so it sticks really well. The raised ridge and spot works really well in providing extra traction and scraping the snow off your boot sole.
- MODULAR AND CONFIGURABLE MAT STOMP:18pcs Pyramid spikes on stomp pad Provides Extra Grip and Pperfect Traction, easily cut 4pcs configurable pieces and moved to perfect traction, where you need it.
- QUICK & EASY APPLICATION:3M Peel,stick adhesives and a adhesion promoter that for Using to increase the bond strength of snowboard surface.
- MAXIMUM TRACTION:The molded Pyramid spike design creates extra grip for maximum traction when out on the slopes.
- BIG SIZE:The size of this pad : 5.2 x 5.2 inches, big enough to provide enough grid and yet it could still fit nicely on the board.
- See more on Amazon...
Brand: XCMAN | Manufacturer: XCMAN(XIAMEN)INDUSTRY&TRADE CO.,LTD
See On Amazon #11
Stompgrip Premium Snowboard Stomp Pad | Dice | Vice Collection | 3D Decal | Clear
Asin: B0CJB2NK7V | Ean: 0840187522007 | UPC: 840187522007
Easy Installation: For Your Convenience, We Provide Product Installation Videos That Offer Easy To Follow, Step-By-Step Instructions With Tips And Tricks To Make Installation Easy. Just Follow The Installation Instructions, It Usually Takes 10-15 Minutes To Complete A Stomp Pad Installation..
Made In The Usa: Since 1994 All Stompgrip Products Have Been Manufactured In Its Huntington Beach, California Usa Warehouse And Shipped Worldwide. All Stomp Pads Are Manufactured Using The Highest Quality Plastics Formulated To Meet Our Customers’ Needs Combined With The Strongest 3M Adhesives Available..
Trust & Confidence: All Products Are Same-Day, Made-To-Order, When Ordering Direct From The Manufacturer. Always Look For “Sold By Stompgrip” To Ensure You Are Buying The Freshest Adhesives Available As Adhesives Are Perishable And Have A Limited Shelf Life. Always Confirm That The Manufactured: Month / Year Stamp On The Back Of The Package Is Within The Warranty Time Frame For Your Purchase Prior To Installation. All Products Are Covered By Stompgrip's Manufacturer Warranty..
3D Design & Function: Stompgrip’S Stomp Pads Are 3D Cad Designed, And Injection Molded In Unique Shapes With Multiple Traction Profiles Available To Choose From Which Provide Varying Levels Of Grip And Protection. Stompgrip Stomp Pads Have A Unique, Rounded-Edge Design To Prevent Peeling Off Snowboards Under Extreme Use Versus Being Die Cut With Rough Edges That Can Catch Or Snag On Boots..
Features
- PREMIUM QUALITY SNOWBOARD STOMP PADS: Stompgrip's premium snowboard Stomp Pads are designed to clear snow and ice from your snowboard boot before strapping into your bindings, give riders control when skating through the flats and lift lines, provide traction for your free foot when entering or exiting the lift and when stomping one-footed landings and tricks.
- 3D DESIGN & FUNCTION: Stompgrip s Stomp Pads are 3D CAD designed, and injection molded in unique shapes with multiple traction profiles available to choose from which provide varying levels of grip and protection. Stompgrip Stomp Pads have a unique, rounded-edge design to prevent peeling off snowboards under extreme use versus being die cut with rough edges that can catch or snag on boots.
- EASY INSTALLATION: For your convenience, we provide product installation videos that offer easy to follow, step-by-step instructions with tips and tricks to make installation easy. Just follow the installation instructions, it usually takes 10-15 minutes to complete a Stomp Pad installation.
- TRUST & CONFIDENCE: All products are same-day, made-to-order, when ordering direct from the manufacturer. Always look for Sold by STOMPGRIP to ensure you are buying the freshest adhesives available as adhesives are perishable and have a limited shelf life. Always confirm that the MANUFACTURED: MONTH / YEAR stamp on the back of the package is within the warranty time frame for your purchase prior to installation. All products are covered by Stompgrip's manufacturer warranty.
- MADE IN THE USA: Since 1994 all Stompgrip products have been manufactured in its Huntington Beach, California USA warehouse and shipped worldwide. All Stomp Pads are manufactured using the highest quality plastics formulated to meet our customers needs combined with the strongest 3M adhesives available.
- See more on Amazon...
Brand: Stompgrip | Manufacturer: Stompgrip
Dimensions: 10.50 x 6.50 x 0.50 inches
See On Amazon #12
Stompgrip Premium Snowboard Stomp Pad | Jynx | 3D Collection | 3D Decal | Grey
Asin: B0CHJN2C6S | Ean: 0840187517546 | UPC: 840187517546
Easy Installation: For Your Convenience, We Provide Product Installation Videos That Offer Easy To Follow, Step-By-Step Instructions With Tips And Tricks To Make Installation Easy. Just Follow The Installation Instructions, It Usually Takes 10-15 Minutes To Complete A Stomp Pad Installation..
Made In The Usa: Since 1994 All Stompgrip Products Have Been Manufactured In Its Huntington Beach, California Usa Warehouse And Shipped Worldwide. All Stomp Pads Are Manufactured Using The Highest Quality Plastics Formulated To Meet Our Customers’ Needs Combined With The Strongest 3M Adhesives Available..
Trust & Confidence: All Products Are Same-Day, Made-To-Order, When Ordering Direct From The Manufacturer. Always Look For “Sold By Stompgrip” To Ensure You Are Buying The Freshest Adhesives Available As Adhesives Are Perishable And Have A Limited Shelf Life. Always Confirm That The Manufactured: Month / Year Stamp On The Back Of The Package Is Within The Warranty Time Frame For Your Purchase Prior To Installation. All Products Are Covered By Stompgrip's Manufacturer Warranty..
3D Design & Function: Stompgrip’S Stomp Pads Are 3D Cad Designed, And Injection Molded In Unique Shapes With Multiple Traction Profiles Available To Choose From Which Provide Varying Levels Of Grip And Protection. Stompgrip Stomp Pads Have A Unique, Rounded-Edge Design To Prevent Peeling Off Snowboards Under Extreme Use Versus Being Die Cut With Rough Edges That Can Catch Or Snag On Boots..
Features
- PREMIUM QUALITY SNOWBOARD STOMP PADS: Stompgrip's premium snowboard Stomp Pads are designed to clear snow and ice from your snowboard boot before strapping into your bindings, give riders control when skating through the flats and lift lines, provide traction for your free foot when entering or exiting the lift and when stomping one-footed landings and tricks.
- 3D DESIGN & FUNCTION: Stompgrip s Stomp Pads are 3D CAD designed, and injection molded in unique shapes with multiple traction profiles available to choose from which provide varying levels of grip and protection. Stompgrip Stomp Pads have a unique, rounded-edge design to prevent peeling off snowboards under extreme use versus being die cut with rough edges that can catch or snag on boots.
- EASY INSTALLATION: For your convenience, we provide product installation videos that offer easy to follow, step-by-step instructions with tips and tricks to make installation easy. Just follow the installation instructions, it usually takes 10-15 minutes to complete a Stomp Pad installation.
- TRUST & CONFIDENCE: All products are same-day, made-to-order, when ordering direct from the manufacturer. Always look for Sold by STOMPGRIP to ensure you are buying the freshest adhesives available as adhesives are perishable and have a limited shelf life. Always confirm that the MANUFACTURED: MONTH / YEAR stamp on the back of the package is within the warranty time frame for your purchase prior to installation. All products are covered by Stompgrip's manufacturer warranty.
- MADE IN THE USA: Since 1994 all Stompgrip products have been manufactured in its Huntington Beach, California USA warehouse and shipped worldwide. All Stomp Pads are manufactured using the highest quality plastics formulated to meet our customers needs combined with the strongest 3M adhesives available.
- See more on Amazon...
Brand: Stompgrip | Manufacturer: Stompgrip
Dimensions: 10.50 x 6.50 x 0.50 inches
See On Amazon #13
Stompgrip Premium Snowboard Stomp Pad | Mud Flap | Old School Collection | 3D Decal | Clear
Asin: B0CHJNWB4T | Ean: 0840187518024 | UPC: 840187518024
Easy Installation: For Your Convenience, We Provide Product Installation Videos That Offer Easy To Follow, Step-By-Step Instructions With Tips And Tricks To Make Installation Easy. Just Follow The Installation Instructions, It Usually Takes 10-15 Minutes To Complete A Stomp Pad Installation..
Made In The Usa: Since 1994 All Stompgrip Products Have Been Manufactured In Its Huntington Beach, California Usa Warehouse And Shipped Worldwide. All Stomp Pads Are Manufactured Using The Highest Quality Plastics Formulated To Meet Our Customers’ Needs Combined With The Strongest 3M Adhesives Available..
Trust & Confidence: All Products Are Same-Day, Made-To-Order, When Ordering Direct From The Manufacturer. Always Look For “Sold By Stompgrip” To Ensure You Are Buying The Freshest Adhesives Available As Adhesives Are Perishable And Have A Limited Shelf Life. Always Confirm That The Manufactured: Month / Year Stamp On The Back Of The Package Is Within The Warranty Time Frame For Your Purchase Prior To Installation. All Products Are Covered By Stompgrip's Manufacturer Warranty..
3D Design & Function: Stompgrip’S Stomp Pads Are 3D Cad Designed, And Injection Molded In Unique Shapes With Multiple Traction Profiles Available To Choose From Which Provide Varying Levels Of Grip And Protection. Stompgrip Stomp Pads Have A Unique, Rounded-Edge Design To Prevent Peeling Off Snowboards Under Extreme Use Versus Being Die Cut With Rough Edges That Can Catch Or Snag On Boots..
Features
- PREMIUM QUALITY SNOWBOARD STOMP PADS: Stompgrip's premium snowboard Stomp Pads are designed to clear snow and ice from your snowboard boot before strapping into your bindings, give riders control when skating through the flats and lift lines, provide traction for your free foot when entering or exiting the lift and when stomping one-footed landings and tricks.
- 3D DESIGN & FUNCTION: Stompgrip s Stomp Pads are 3D CAD designed, and injection molded in unique shapes with multiple traction profiles available to choose from which provide varying levels of grip and protection. Stompgrip Stomp Pads have a unique, rounded-edge design to prevent peeling off snowboards under extreme use versus being die cut with rough edges that can catch or snag on boots.
- EASY INSTALLATION: For your convenience, we provide product installation videos that offer easy to follow, step-by-step instructions with tips and tricks to make installation easy. Just follow the installation instructions, it usually takes 10-15 minutes to complete a Stomp Pad installation.
- TRUST & CONFIDENCE: All products are same-day, made-to-order, when ordering direct from the manufacturer. Always look for Sold by STOMPGRIP to ensure you are buying the freshest adhesives available as adhesives are perishable and have a limited shelf life. Always confirm that the MANUFACTURED: MONTH / YEAR stamp on the back of the package is within the warranty time frame for your purchase prior to installation. All products are covered by Stompgrip's manufacturer warranty.
- MADE IN THE USA: Since 1994 all Stompgrip products have been manufactured in its Huntington Beach, California USA warehouse and shipped worldwide. All Stomp Pads are manufactured using the highest quality plastics formulated to meet our customers needs combined with the strongest 3M adhesives available.
- See more on Amazon...
Brand: Stompgrip | Manufacturer: Stompgrip
Dimensions: 10.50 x 6.50 x 0.50 inches
Warranty: Manufacturer Warranty
See On Amazon #14
Stomp Design Universal Tank Pad Protector Volcano Black
Asin: B001KOIR8W
Available In Clear Or Black.
Peel And Stick Super Strong Adhesive.
Features
- Ultra clean elastomer material
- Peel and stick super strong adhesive
- Available in clear or black
- See more on Amazon...
Brand: Stompgrip | Manufacturer: Stomp Design
Dimensions: 10.30 x 7.00 x 0.30 Inches
See On Amazon #15
Stompgrip Premium Snowboard Stomp Pad | Polly | 3D Collection | 3D Decal | Black
Asin: B0CHJMBDZ4 | Ean: 0840187517560 | UPC: 840187517560
Easy Installation: For Your Convenience, We Provide Product Installation Videos That Offer Easy To Follow, Step-By-Step Instructions With Tips And Tricks To Make Installation Easy. Just Follow The Installation Instructions, It Usually Takes 10-15 Minutes To Complete A Stomp Pad Installation..
Made In The Usa: Since 1994 All Stompgrip Products Have Been Manufactured In Its Huntington Beach, California Usa Warehouse And Shipped Worldwide. All Stomp Pads Are Manufactured Using The Highest Quality Plastics Formulated To Meet Our Customers’ Needs Combined With The Strongest 3M Adhesives Available..
Trust & Confidence: All Products Are Same-Day, Made-To-Order, When Ordering Direct From The Manufacturer. Always Look For “Sold By Stompgrip” To Ensure You Are Buying The Freshest Adhesives Available As Adhesives Are Perishable And Have A Limited Shelf Life. Always Confirm That The Manufactured: Month / Year Stamp On The Back Of The Package Is Within The Warranty Time Frame For Your Purchase Prior To Installation. All Products Are Covered By Stompgrip's Manufacturer Warranty..
3D Design & Function: Stompgrip’S Stomp Pads Are 3D Cad Designed, And Injection Molded In Unique Shapes With Multiple Traction Profiles Available To Choose From Which Provide Varying Levels Of Grip And Protection. Stompgrip Stomp Pads Have A Unique, Rounded-Edge Design To Prevent Peeling Off Snowboards Under Extreme Use Versus Being Die Cut With Rough Edges That Can Catch Or Snag On Boots..
Features
- PREMIUM QUALITY SNOWBOARD STOMP PADS: Stompgrip's premium snowboard Stomp Pads are designed to clear snow and ice from your snowboard boot before strapping into your bindings, give riders control when skating through the flats and lift lines, provide traction for your free foot when entering or exiting the lift and when stomping one-footed landings and tricks.
- 3D DESIGN & FUNCTION: Stompgrip s Stomp Pads are 3D CAD designed, and injection molded in unique shapes with multiple traction profiles available to choose from which provide varying levels of grip and protection. Stompgrip Stomp Pads have a unique, rounded-edge design to prevent peeling off snowboards under extreme use versus being die cut with rough edges that can catch or snag on boots.
- EASY INSTALLATION: For your convenience, we provide product installation videos that offer easy to follow, step-by-step instructions with tips and tricks to make installation easy. Just follow the installation instructions, it usually takes 10-15 minutes to complete a Stomp Pad installation.
- TRUST & CONFIDENCE: All products are same-day, made-to-order, when ordering direct from the manufacturer. Always look for Sold by STOMPGRIP to ensure you are buying the freshest adhesives available as adhesives are perishable and have a limited shelf life. Always confirm that the MANUFACTURED: MONTH / YEAR stamp on the back of the package is within the warranty time frame for your purchase prior to installation. All products are covered by Stompgrip's manufacturer warranty.
- MADE IN THE USA: Since 1994 all Stompgrip products have been manufactured in its Huntington Beach, California USA warehouse and shipped worldwide. All Stomp Pads are manufactured using the highest quality plastics formulated to meet our customers needs combined with the strongest 3M adhesives available.
- See more on Amazon...
Brand: Stompgrip | Manufacturer: Stompgrip
Dimensions: 10.50 x 6.50 x 0.50 Inches
See On Amazon #16
One Mfg Shred Snowboard Stomp Pad 6" x 5" - Lightweight, Anti-Slip, USA Made Traction
Asin: B079TFXLBS | Ean: 0759195965648 | UPC: 759195965648
Easy To Apply - We Only Use The Best Pressure Sensitive Adhesive, So Your Stomp Will Stay Stuck Down On Any Type Of Smooth Or Textured Top Sheet..
Made In The Usa - Developed, Tested And Manufactured In The Usa. We Also Do Our Best To Reduce Unnecessary Packaging. All Usa Made One Mfg Stomps Are Packaged Directly On A Recyclable Header Card Without No Exterior Packaging Film..
Instructions - Make Sure Board Is Clean, Dry And Warm. Test Place Stomp In Front Of Rear Binding, And Mark Corners With Pencil. Carefully Remove Backing Paper And Place The Stomp Pad. Press Down With Firm Pressure Over The Entire Pad. Let Dry Overnight..
Da Dum… Da Dum… Da Dum Da Dum Da Dum Shred Stomp 6" X 6" [15Cm X 15Cm ] - If You Saw This Movie When You Were A Kid, You Didn't Even Want To Get In A Swimming Pool You Were So Scared. Also, You Are Really Old Now..
Features
- LIGHT WEIGHT, HiGH IMPACT, THERMOPLASTIC, SNOWBOARD STOMP PAD - Molded 7mm spikes provide great grip for boots, with a smooth finish that won't abrade or tear clothing or gloves when carrying your board.
- DA DUM DA DUM DA DUM DA DUM DA DUM SHRED STOMP 6 x 6 [15cm x 15cm ] - If you saw this movie when you were a kid, you didn't even want to get in a swimming pool you were so scared. Also, you are really old now.
- EASY TO APPLY - We only use the best Pressure Sensitive Adhesive, so your stomp will stay stuck down on any type of smooth or textured top sheet.
- INSTRUCTIONS - Make sure board is clean, dry and warm. Test place stomp in front of rear binding, and mark corners with pencil. Carefully remove backing paper and place the stomp pad. Press down with firm pressure over the entire pad. Let dry overnight.
- MADE IN THE USA - Developed, tested and manufactured in the USA. We also do our best to reduce unnecessary packaging. All USA made One Mfg Stomps are packaged directly on a recyclable header card without no exterior packaging film.
- See more on Amazon...
Brand: ONEBALL | Manufacturer: Oneball
See On Amazon #17
Stompgrip Motorcycle Traction Pads - Universal Mini Strips - Volcano Grip Pattern (Clear)
Asin: B085VPG48C | Ean: 0840187510387 | UPC: 840187510387
Brand: Stompgrip | Manufacturer: Stompgrip
Dimensions: 7.00 x 10.25 x 0.25 inches
See On Amazon #18
Stompgrip Motorcycle Traction Pads - STREET BIKE TANK GRIPS - VOLCANO - 0019 (Clear)
Asin: B09KN45YBW | Ean: 0840187511650 | UPC: 840187511650
Brand: Stompgrip | Manufacturer: Stompgrip
Dimensions: 11.50 x 14.50 x 0.50 Inches
See On Amazon #19
Stompgrip Motorcycle Traction Pads - STREET BIKE TANK GRIPS - VOLCANO - 0040 (Clear)
Asin: B09KMFV5BR | Ean: 0840187512206 | UPC: 840187512206
Brand: Stompgrip | Manufacturer: Stompgrip
Dimensions: 11.50 x 14.50 x 0.50 inches
See On Amazon
Looking For Something Else?
Search