Peachtree Woodworking Supply A-Line It Basic Kit with Dial Indicator For Aligning and Calibrating Work Shop Machinery Like Table Saws, Band Saws and Drill Presses
Asin: B001B0TNCO | Model: 13 | PartNumber: 13 | Ean: 0810948016106 | UPC: 810948016106
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The 1" Capacity Dial Indicator Reads In .001" Increments For Absolute Precision. Self Adjusting Miter Groove Bar With Leveling Screws And Spring Plungers For Perfect Fit In Your Miter Slot..
Comes With Hardware And Hex Wrench For Assembly, Instructions And Instructional Dvd For Expert Guidance In Getting The Best Performance And Accuracy From Your Woodworking Machines..
Dial Indicator Mounting Bar Measures 3/4” X 3/4” X 5-1/2”, Miter Groove Bar Measures 3/8” X 3/4" X 6-1/4"..
The A-Line-It Basic Kit Is The Perfect Starter Kit For Hobbyists And Small Shops..
Features
- Quickly set-up, tune up, and check the accuracy of your shop's tools with this system. Check table saw blade and fence alignment, arbor and blade run-out, miter slot to blade squareness, arbor/chuck run-out, jointer/planer head to table parallelism, jointer/planer knife alignment, out-feed table alignment; router/shaper spindle run-out, or any other set up or alignment measurement you desire.
- The A-LINE-IT Basic Kit is the perfect starter kit for hobbyists and small shops.
- The 1 capacity dial indicator reads in .001 increments for absolute precision. Self adjusting miter groove bar with leveling screws and spring plungers for perfect fit in your miter slot.
- Dial indicator mounting bar measures 3/4 x 3/4 x 5-1/2 , miter groove bar measures 3/8 x 3/4 x 6-1/4.
- Comes with hardware and hex wrench for assembly, instructions and instructional DVD for expert guidance in getting the best performance and accuracy from your woodworking machines.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 3.00 x 7.20 x 5.10 inches | Weight: 1.11 pounds
See On Amazon Similar To Peachtree Woodworking Supply ALine It
#1
Peachtree Woodworking Supply A-LINE-IT DELUXE Machinery/Tool Alignment System w/ 22 Interchangeable Tips, 11 inch Long Anodized Aluminum Bar, Dial Indicator, Precision Steel Pin and Arbor Run-Out Kit
Asin: B0036AYXQS | Model: 3158 | PartNumber: 3158 | Ean: 0810948015727 | UPC: 810948015727
One Of The Reasons You’Ll Appreciate This System Is The Self-Adjusting “Smart Bar” That Will Stay Tight In A Miter Slot That Isn’T The Same Size Along It’S Slot Length. You Only Need To Adjust The Spring Plungers Once, And After That, Its A Perfect Fit In The Miter Slot. This Makes The Measuring Process Much More Efficient Since You Don’T Need To Keep Shimming Or Adjusting The Miter Bar For A Snug Fit..
The A-Line-It Deluxe Includes The Following: Dial Indicator In .001” Increments, 22 Assorted And Interchangeable Dial Indicator Tips, 11” Long Bar With 12 Adjustment Holes, Smart Miter Bar With Spring Loaded Adjustable Plungers, Threaded 1/2” Diameter Steel Drill Press Chuck Pin, The Exclusive Arbor Nut Run-Out Kit, Planer Bar (For Checking Run-Out On Planers With Knife Style Cutter Heads) And Detailed Instructions..
Another Thing You Will Appreciate Is That With The A-Line-It Deluxe, You Get Everything You’Ll Need To Thoroughly Check Your Machines In One Package. The Spring And Nut Assembly, As An Example, Makes The A-Line-It Deluxe The Only Tool In The Us That Will Allow You To Determine Whether The Run-Out In The Saw Blade Is Caused By The Blade, The Arbor, Or A Combination Of Both. Being Able To Determine This Is Vitally Important To Achieve The Best Running Table Saw Possible..
One Of The Most Common Machines That Need To Be Aligned And Maintained Is Our Table Saws. As We Use Them, The Fence And Saw Blade Amongst Other Parts Tend To Slightly Shift Over Time. The A-Line-It Deluxe Has All The Necessary Pieces To The Puzzle To Help You Identify What Needs To Be Addressed In Order To Get Your Table Saw In Tip Top Shape Again. You Can Easily Identify, Saw Blade Straightness, Fence Run-Out, Arbor Run-Out And Flange Run-Out..
Features
- Aligning your workshop machinery can be very frustrating. Sometimes a tape measure, ruler and a firm fist bump just won t cut it. If you desire to have your machinery working at optimal levels then look no further than the A-LINE-IT DELUXE Machinery and Tool Alignment System. Get the precision you want out of your machinery without having to break the bank. After all, much like a car, your machinery is an investment that needs to be tuned up and maintained.
- One of the most common machines that need to be aligned and maintained is our table saws. As we use them, the fence and saw blade amongst other parts tend to slightly shift over time. The A-LINE-IT DELUXE has all the necessary pieces to the puzzle to help you identify what needs to be addressed in order to get your table saw in tip top shape again. You can easily identify, saw blade straightness, fence run-out, arbor run-out and flange run-out.
- One of the reasons you ll appreciate this system is the self-adjusting Smart Bar that will stay tight in a miter slot that isn t the same size along it s slot length. You only need to adjust the spring plungers once, and after that, its a perfect fit in the miter slot. This makes the measuring process much more efficient since you don t need to keep shimming or adjusting the miter bar for a snug fit.
- Another thing you will appreciate is that with the A-LINE-IT DELUXE, you get everything you ll need to thoroughly check your machines in one package. The spring and nut assembly, as an example, makes the A-LINE-IT DELUXE the only tool in the US that will allow you to determine whether the run-out in the saw blade is caused by the blade, the arbor, or a combination of both. Being able to determine this is vitally important to achieve the best running table saw possible.
- The A-LINE-IT DELUXE includes the following: Dial Indicator in .001 increments, 22 assorted and interchangeable dial indicator tips, 11 long bar with 12 adjustment holes, smart miter bar with spring loaded adjustable plungers, threaded 1/2 diameter steel drill press chuck pin, the exclusive arbor nut run-out kit, planer bar (for checking run-out on planers with knife style cutter heads) and detailed instructions.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: In-Line Industries
Dimensions: 2.90 x 9.70 x 8.30 inches
See On Amazon #2
Peachtree Woodworking Supply The Original Dubby Cut-Off Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side and Right Side are Included)
Asin: B09X7H967R | Ean: 0817918023225 | UPC: 817918023225
Working With Angles The Dubby Angle Scale Is The Simplest, Most Accurate And Easiest To Read Scale Available. Being About 15-20 Times More Accurate Than The Average Miter Gauge, The Scale Has Pre-Determined Lines For Any Shape (From 4 To 16 Sides) You Want To Cut. This Means No Calculations, No Hassles, And Best Of All, No Test Cuts For Perfect Results.
Will The Dubby Fit Your Saw? The Dubby Sled Is Compatible With Most Cabinet And Contractor Table Saws. However, Your Table Saw Should Fall Within The Following Specs For A Proper Fit. The Miter Slot Should Be A ¾” Wide X 3/8” Deep Slot. Your Saw Must Measure At Least 27” From The Front Of The Saw To The Back. The Miter Slot Must Be 4” To 5 ¾” From The Installed Table Saw Blade. Please Note: That The Dubby Will Not Work On Most Jobsite Style Table Saws. Please Measure Your Saw Before Ordering..
Working With Small Pieces- No Miter Gauge On The Market Can Offer You The Margin Of Safety Provided By The Dubby Sled. The Versatile Hold-Down Clamp Included With Every Dubby Will Give You An Extremely Safe Way To Cut Small Pieces, And Will Easily Pivot Out Of The Way When You Don’T Need It. With 35Lbs. Of Hold Down Pressure, The Clamp Will Hold Small Pieces All The While Keeping Your Hands And Fingers Out Of Harms Way..
Working With Large Panels The Dubby Has The Capacity To Crosscut Panels Up To 24″ Wide X 52″ Long, And Allows You To Do Them Safely. Since The Panels Don’T Make Contact With The Table Saw Top, “Walking” Of The Material Is Virtually Eliminated. This Will Allow You To Cut Perfectly Square Panels For Your Furniture And Cabinet Making Projects Quickly, Easily And Accurately..
Features
- THE ORIGINAL DUBBY SLED From standard 4 sided panel cutting to the absolutely stunning heptagon frame you will be completely accurate with the angles on your mitered projects with the Dubby Sled. The Dubby will allow you to make perfect cuts the first time you do them and keep your creative juices flowing with idea after idea. It is ideal for making frames but it also works very well for the cutting of tiny pieces while keeping your fingers out of harms way.
- WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24 wide x 52 long, and allows you to do them safely. Since the panels don t make contact with the table saw top, walking of the material is virtually eliminated. This will allow you to cut perfectly square panels for your furniture and cabinet making projects quickly, easily and accurately.
- WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate than the average miter gauge, the scale has pre-determined lines for any shape (from 4 to 16 sides) you want to cut. This means no calculations, no hassles, and best of all, no test cuts for perfect results
- WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp included with every Dubby will give you an extremely safe way to cut small pieces, and will easily pivot out of the way when you don t need it. With 35lbs. of hold down pressure, the clamp will hold small pieces all the while keeping your hands and fingers out of harms way.
- WILL THE DUBBY FIT YOUR SAW? The Dubby sled is compatible with most cabinet and contractor table saws. However, your table saw should fall within the following specs for a proper fit. The Miter Slot should be a wide x 3/8 deep slot. Your saw must measure at least 27 from the front of the saw to the back. The miter slot must be 4 to 5 from the installed table saw blade. PLEASE NOTE: that the Dubby WILL NOT work on most JOBSITE style table saws. Please measure your saw before ordering.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 20.00 pounds
See On Amazon #3
PRO-GRIP 90 DEGREE HEAD BY PEACHTREE WOODWORKING PW569
Asin: B0036VKM9Y | Model: 569 | PartNumber: 569 | Ean: 0810948017912 | UPC: 810948017912
Fastens Securely On The Clamp With 2 Screws (Included).
Clamp And Wood Not Included.
90 Degree Head Allows You To Line Up Square With The Edge Of Your Stock For Fast 90 Degree Cuts.
Slides Over The Top Of The Pro-Grip Clamp Head.
Features
- Turn any size PRO-GRIP straight edge clamp into a oversized T-square
- Slides over the top of the PRO-GRIP clamp head
- Fastens securely on the clamp with 2 screws (included)
- 90 Degree head allows you to line up square with the edge of your stock for fast 90 degree cuts
- Clamp and wood NOT INCLUDED
- See more on Amazon...
Brand: Progrip | Manufacturer: Peachtree Woodworking Supply Inc
See On Amazon #4
Peachtree Woodworking Supply The Original Dubby Cut-Off Cutting Precise Accurate Miters with a Table Saw (Right Side Dubby Sled)
Asin: B00CPTFI7E | Ean: 0810948018155 | UPC: 810948018155
Working With Angles The Dubby Angle Scale Is The Simplest, Most Accurate And Easiest To Read Scale Available. Being About 15-20 Times More Accurate Than The Average Miter Gauge, The Scale Has Pre-Determined Lines For Any Shape (From 4 To 16 Sides) You Want To Cut. This Means No Calculations, No Hassles, And Best Of All, No Test Cuts For Perfect Results.
Will The Dubby Fit Your Saw? The Dubby Sled Is Compatible With Most Cabinet And Contractor Table Saws. However, Your Table Saw Should Fall Within The Following Specs For A Proper Fit. The Miter Slot Should Be A ¾” Wide X 3/8” Deep Slot. Your Saw Must Measure At Least 27” From The Front Of The Saw To The Back. The Miter Slot Must Be 4” To 5 ¾” From The Installed Table Saw Blade. Please Note: That The Dubby Will Not Work On Most Jobsite Style Table Saws. Please Measure Your Saw Before Ordering..
Working With Small Pieces- No Miter Gauge On The Market Can Offer You The Margin Of Safety Provided By The Dubby Sled. The Versatile Hold-Down Clamp Included With Every Dubby Will Give You An Extremely Safe Way To Cut Small Pieces, And Will Easily Pivot Out Of The Way When You Don’T Need It. With 35Lbs. Of Hold Down Pressure, The Clamp Will Hold Small Pieces All The While Keeping Your Hands And Fingers Out Of Harms Way..
Working With Large Panels The Dubby Has The Capacity To Crosscut Panels Up To 24″ Wide X 52″ Long, And Allows You To Do Them Safely. Since The Panels Don’T Make Contact With The Table Saw Top, “Walking” Of The Material Is Virtually Eliminated. This Will Allow You To Cut Perfectly Square Panels For Your Furniture And Cabinet Making Projects Quickly, Easily And Accurately..
Features
- THE ORIGINAL DUBBY SLED From standard 4 sided panel cutting to the absolutely stunning heptagon frame you will be completely accurate with the angles on your mitered projects with the Dubby Sled. The Dubby will allow you to make perfect cuts the first time you do them and keep your creative juices flowing with idea after idea. It is ideal for making frames but it also works very well for the cutting of tiny pieces while keeping your fingers out of harms way.
- WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24 wide x 52 long, and allows you to do them safely. Since the panels don t make contact with the table saw top, walking of the material is virtually eliminated. This will allow you to cut perfectly square panels for your furniture and cabinet making projects quickly, easily and accurately.
- WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate than the average miter gauge, the scale has pre-determined lines for any shape (from 4 to 16 sides) you want to cut. This means no calculations, no hassles, and best of all, no test cuts for perfect results
- WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp included with every Dubby will give you an extremely safe way to cut small pieces, and will easily pivot out of the way when you don t need it. With 35lbs. of hold down pressure, the clamp will hold small pieces all the while keeping your hands and fingers out of harms way.
- WILL THE DUBBY FIT YOUR SAW? The Dubby sled is compatible with most cabinet and contractor table saws. However, your table saw should fall within the following specs for a proper fit. The Miter Slot should be a wide x 3/8 deep slot. Your saw must measure at least 27 from the front of the saw to the back. The miter slot must be 4 to 5 from the installed table saw blade. PLEASE NOTE: that the Dubby WILL NOT work on most JOBSITE style table saws. Please measure your saw before ordering.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 3.50 pounds
See On Amazon #5
Peachtree Woodworking Supply Deluxe Starter Pen Turning Kit (Classic Slim Style)
Asin: B06XC13DF5 | Ean: 0817918020156 | UPC: 817918020156
1 Each Chrome Pen Kit And 1 Each Gold Pen Kit Included.
Read Full Description Below For Complete List Of Included Parts.
Everything Included In One Convenient Storage Case.
Ideal For Any Level Of Woodturner.
Features
- Create a custom pen as the perfect gift or keepsake
- Ideal for any level of woodturner
- 1 each chrome pen kit and 1 each gold pen kit included
- Everything included in one convenient storage case
- Read full description below for complete list of included parts
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #6
Peachtree Woodworking Supply 630 Miter Slot Long Jig and Fixture Locking Kit
Asin: B07F3FWDJ2 | Model: 630 | PartNumber: 630 | Ean: 0810948017530 | UPC: 810948017530
Use On Any Standard 3/4" Wide X 3/8" Deep Miter Gauge Slot..
Works With Many Different Brands Of Feather Boards.
Includes; 2 Ea Jig Bars, Knobs With Screws, Washers.
Excellent For Attaching Featherboards, Hold-Downs & Special Jigs.
Features
- Build your own jigs, fixtures and hold- downs. This kit is a must for anyone who enjoys creating there own jigs and fixtures to make repeptive work much easier!
- Excellent for attaching featherboards, hold-downs & special jigs
- Use on any standard 3/4 wide x 3/8 deep miter gauge slot.
- Includes; 2 ea jig bars, knobs with screws, washers
- Works with many different brands of feather boards
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #7
Peachtree Woodworking Supply Router Radii Templates for Routing Accurate Rounded Corners On Your Woodworking Projects
Asin: B0040BNLRO | Ean: 0810948019596 | UPC: 810948019596
The Set Includes 3 Clear Templates Each Containing 4 Different Sized Radii.
Adjustable And Moveable Steel Index Pins Align The Template.
3 Templates Cover Radius Sizes From 1/8" To 1" In 1/16" Increments.
Features
- These templates allow routing of different sized rounded corners using a bearing guided pattern bit
- 3 templates cover radius sizes from 1/8 to 1 in 1/16 increments
- The set includes 3 clear templates each containing 4 different sized radii
- Adjustable and moveable steel index pins align the template
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #8
Peachtree Woodworking Down Draft Panel Set of 2 - PW3592
Asin: B00405NTTA | Ean: 0814310010334 | UPC: 814310010334
Orange Stops Included To Prevent Stock Movement While Sanding.
The Set Includes 2 Down Draft Panels..
Stops Can Be Placed In Any Of The Open Holes On The Plate.
Has Soft, Non-Slip Rubber Grommets To Prevent Marking The Stock.
Features
- Each plate measures 6 3/4" x 16 1/2"
- Has soft, non-slip rubber grommets to prevent marking the stock
- Orange stops included to prevent stock movement while sanding
- Stops can be placed in any of the open holes on the plate
- The set includes 2 down draft panels.
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: Peachtree Woodworking
See On Amazon #9
Peachtree Woodworking Supply PVC Tipped Aluminum Hold Down - 3/8" x 16
Asin: B00HHCIRJ0 | Ean: 0814310012154 | UPC: 814310012154
More Gripping Power When Pressure Is Applied To Your Stock.Includes Star Knob And Bolt.
Available In The Two Most Commonly Used Sizes Of 1/4" X 20 And 3/8 X 16 (Each Sold Separately).
Includes Star Knob And Bolt.
Clamp Feature Non-Marring Pvc Tips.
Features
- 1 each 3/8" x 16 PVC tipped aluminum hold down
- Clamp feature non-marring PVC tips
- More gripping power when pressure is applied to your stock.Includes star knob and bolt
- Includes star knob and bolt
- Available in the two most commonly used sizes of 1/4 x 20 and 3/8 x 16 (EACH SOLD SEPARATELY)
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking
See On Amazon
Looking For Something Else?
Search