NT Cutter Heavy-Duty Circle Cutter, 1-3/16 Inches 6-5/16 Inches Diameter, 1 Cutter (C-2500P)
Asin: B001V7JZE8 | Model: C-2500P | PartNumber: C-2500P | Ean: 4904011011153
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Blade Included: 2 Refill Blades Are Located On The Underside In The Small Compartment..
Made In Japan.
Cutting Material: Thin Veneer/Ceiling Tile/Leather/Rubber/Acetates/Cardboard/Thin Floor Mat Etc..
This Can Cut 1.5 - 2.0 Mm (0.06 - 0.08") Thick Materials. The Blade Should Only Stick Out No More Than 0.1 To 0.2 Mm Longer Than The Material You Are Cutting..
Replacement Blade: Bc-1P (Bc-400P Is Also Applicable).
Diameter 3 - 16Cm (1.181 - 6.29 Inch).
Features
- Heavy duty circle cutter
- Diameter 3 - 16cm (1.181 - 6.29 inch)
- Blade included: 2 refill blades are located on the underside in the small compartment.
- Replacement blade: BC-1P (BC-400P is also applicable)
- Cutting material: thin veneer/ceiling tile/leather/rubber/acetates/cardboard/thin floor mat etc.
- This can cut 1.5 - 2.0 mm (0.06 - 0.08) thick materials. The blade should only stick out no more than 0.1 to 0.2 mm longer than the material you are cutting.
- Made in Japan
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 2.10 x 5.10 x 5.10 inches | Weight: 0.37 Pounds
See On Amazon Similar To NT Cutter HeavyDuty Circle Cutter
#1
NT Cutter PRO Auto-Lock Stainless Steel Graphic Knife (AD-2P), Standard
Asin: B003DXWN42 | Model: AD-2P | PartNumber: AD-2P | Ean: 7336117860613, 8861349019038, 4904011010255, 8271072778636, 7487993746024, 7131405073320
30 Degree Blade.
Cutting Material: Film, Vinyl, Foam Board, Coroplast, Leather, Plastic Edge, Etc.
Made In Japan.
With Built-In Blade Snapper And Pocket Clip / Designed For Right And Left Handed Use.
Replacement Blade: Bad-21P (Ba-160, Ba-50P, Ba-50Ss, Ba-51P, Ba-53P And Ba-40000-On Are Also Applicable).
Features An Automatic Blade Lock.
Blade Size: 9Mm.
Features
- Standard duty rust resistant stainless steel snap off blade knife
- Blade Size: 9mm
- 30 degree blade
- Features an automatic blade lock
- With built-in blade snapper and pocket clip / Designed for right and left handed use
- Replacement blade: BAD-21P (BA-160, BA-50P, BA-50SS, BA-51P, BA-53P and BA-40000-ON are also applicable)
- Cutting Material: Film, vinyl, foam board, coroplast, leather, plastic edge, etc
- Made in Japan
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.40 x 5.40 x 0.40 Inches | Weight: 0.04 Pounds
See On Amazon #2
LION Ev-R-Round Perfect Circle Cutter , 3/4" to 6-3/4" Diameter (C-1500)
Asin: B00JDTTIWU | Model: C-1500P | PartNumber: C-1500P | Ean: 0030203900180 | UPC: 030203900180
Measurements Are Metric (Mm/Cm).
Replacement Blade: Bda-200P.
# Of Blade Included: 6 (1 Already Set To The Body + 5 Extra In Built-In Compartment ).
Dia. (3/4" - 6-3/4"). This Can Cut 0.5Mm (0.02") Thick Materials (Doesn’T Cut Hard Material Well). The Blade Should Only Stick Out No More Than 0.1 To 0.2 Mm Longer Than The Material You Are Cutting..
Features
- Circle cutter. If you are a first-time user, you may need some practice to use this product.
- Dia. (3/4 - 6-3/4). This can cut 0.5mm (0.02) thick materials (doesn t cut hard material well). The blade should only stick out no more than 0.1 to 0.2 mm longer than the material you are cutting.
- Measurements are Metric (mm/cm)
- # of blade included: 6 (1 already set to the body + 5 extra in built-in compartment )
- Replacement blade: BDA-200P
- See more on Amazon...
Brand: NT Cutter | Manufacturer: Lionel
Dimensions: 2.10 x 3.90 x 4.30 Inches | Weight: 0.16 Pounds
See On Amazon #3
NT Cutter Aluminum Die-Cast Body Heavy-Duty Circle Cutter, 1-3/16 Inches 10-1/4 Inches Diameter, 1 Cutter (C-3000GP)
Asin: B004INPJPQ | Model: C-3000GP | PartNumber: C-3000GP | Ean: 4904011011177
Replacement Blade: 2 X Bc-400P Single Edge Blade Included. Double Edged Blade Bc-1P Is Available To Purchase Separately.*.
This Can Cut 1.5 - 2.0 Mm (0.06 - 0.08") Thick Materials. The Blade Should Only Stick Out No More Than 0.1 To 0.2 Mm Longer Than The Material You Are Cutting.
Cutting Material: Thin Veneer/Ceiling Tile/Leather/Rubber/Acetates/Cardboard/Thin Floor Mat Etc.
Diameter 3 - 26Cm (1.18 - 10.23 Inch).
Features
- Heavy duty circle cutter
- Diameter 3 - 26cm (1.18 - 10.23 inch)
- Replacement blade: 2 x BC-400P single edge blade included. Double edged blade BC-1P is available to purchase separately.*
- Cutting material: thin veneer/ceiling tile/leather/rubber/acetates/cardboard/thin floor mat etc
- This can cut 1.5 - 2.0 mm (0.06 - 0.08) thick materials. The blade should only stick out no more than 0.1 to 0.2 mm longer than the material you are cutting
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 2.40 x 6.30 x 4.70 inches | Weight: 0.72 pounds
See On Amazon #4
NT Cutter Circle Cutter, 11/16 Inches ~ 6-11/16 Inches Diameter, 1 Cutter (C-1500)
Asin: B0016V7NZM | Model: C-1500 | PartNumber: C-1500 | Ean: 0793187194272, 0780411642876, 4904011011139 | UPC: 780411642876, 793187194272
# Of Blade Included: 6.
Cutting Material: Paper/Card Stock/Soft Film/Leather/Thin Rubber Sheet/Any Other Thin Material.
Replacement Blade: Bda-200P.
Diameter 1.8 - 17Cm (0.71 - 6.69 Inch).
Features
- Circle cutter with centering guide
- Diameter 1.8 - 17cm (0.71 - 6.69 inch)
- # of blade included: 6
- Replacement blade: BDA-200P
- Cutting material: paper/card stock/soft film/leather/thin rubber sheet/any other thin material
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 2.10 x 3.90 x 4.30 inches | Weight: 0.16 Pounds
See On Amazon #5
NT Cutter 30-Degree Blades for Art Knife and Circle Cutter, 40-Blade/Pack, 1 Pack (BDC-200P)
Asin: B003CF8X5Y | Model: BDC-200P | PartNumber: BDC-200P | Ean: 4904011016639
30 Degree Blades.
40Ea Per Pack.
Made In Japan.
Packed In Hanging Plastic Container.
Cutting Material: Vynil Any Other Thin Material.
Made Of High Quality Carbon Tool Steel.
4Mm W X 18Mm L X 0.38Mm T.
Features
- Blades for Art knives and circle cutters
- 4mm W x 18mm L x 0.38mm T
- 30 degree blades
- Made of high quality carbon tool steel
- Packed in hanging plastic container
- Cutting Material: Vynil any other thin material
- 40ea per pack
- Made in Japan
- See more on Amazon...
First Available: 09/07/2019
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.02 x 0.71 x 0.16 Inches | Weight: 0.02 Pounds
See On Amazon #6
NT Cutter Aluminum Die-Cast Grip Multi-Blade Cartridge Knife (A-1000RP)
Asin: B009F6BXME | Model: A-1000RP | PartNumber: A-1000RP | Ean: 0030203900104 | UPC: 030203900104
Blade Size: 9Mm.
# Of Blade Included: 2.
Replacement Blade: Ba-160, Ba-50P (Ba-50Ss, Ba-51P, Ba-53P And Ba-40000-On Are Also Applicable).
Aluminum Die-Cast Grip / Electrical-Acrylic Metal Coated / Made Of Recycled Materials.
Stainless Steel Blade-Sliding-Track / With Triangle Blade Snapper.
Features An Automatic Blade Lock.
Multi-Blade Cartridge / Accommodates Up To 5 Blades.
Features
- Standard duty snap off blade utility knife
- Multi-blade cartridge / Accommodates up to 5 blades
- Blade Size: 9mm
- Features an automatic blade lock
- Aluminum die-cast grip / Electrical-acrylic metal coated / Made of recycled materials
- Stainless steel blade-sliding-track / With triangle blade snapper
- # of blade included: 2
- Replacement blade: BA-160, BA-50P (BA-50SS, BA-51P, BA-53P and BA-40000-ON are also applicable)
- See more on Amazon...
First Available: 09/12/2012
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.50 x 5.40 x 1.00 Inches | Weight: 0.10 Pounds
See On Amazon #7
NT Cutter Blades for Heavy-Duty Circle Cutters and Mat Board Cutters, 10-Blade per Pack (BC-400P)
Asin: B001V7E1DI | Model: BC-400P | PartNumber: BC-400P | Ean: 4904011017070
Made Of High Quality Carbon Tool Steel.
Cutting Material: Foamboard, Matboard, Soft Film, Leather, Thin Rubber Sheet, Card Stock, Any Other Thin Material.10Ea Per Pack.Made In Japan.
Packed In Hanging Plastic Case.
9Mm W X 20Mm L X 1Mm T.
Features
- Blades for heavy duty circle cutters (C-2500P, C-3000GP, CL-100P) and mat board cutter (OL-7000GP)
- 9mm W x 20mm L x 1mm T
- Made of high quality carbon tool steel
- Packed in hanging plastic case
- Cutting Material: Foamboard, matboard, soft film, leather, thin rubber sheet, card stock, any other thin material.10ea per pack.Made in Japan
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.04 x 0.79 x 0.35 Inches | Weight: 0.02 Pounds
See On Amazon #8
NT Cutter Premium Evolution PMG series Aluminum Die-Cast Grip Auto-Lock Utility Knife, With 30-Degree Extra Sharp Black Blade (PMGA-EVO2)
Asin: B07FM4TWC7 | Model: PMGA-EVO2 | PartNumber: PMGA-EVO2 | Ean: 4904011012358
Electrical-Acrylic Metal Coated Aluminum Die-Cast Grip With Built-In Blade Snapper / Designed For Right And Left Handed Use.
Replacement Blade: Ba15p Carbon Steel Blade / Made In Japan (Taa Designated).
Cutting Material: Paper, Wallpaper, Card Stock, Vinyl, Film, Shrink-Wrap, Etc. / Good For Craft & Hobby Projects, Professional Artists Or Installers, General Use.
Features An Automatic Blade Lock And Stainless Steel Blade-Sliding-Track.
Features
- Standard duty snap off blade utility knife with 9mm, Black extra sharp 30 degree blade
- Features an automatic blade lock and stainless steel blade-sliding-track
- Electrical-acrylic metal coated Aluminum die-cast grip with built-in blade snapper / Designed for right and left handed use
- Cutting Material: Paper, wallpaper, card stock, vinyl, film, shrink-wrap, etc. / Good for craft & hobby projects, professional artists or installers, general use
- Replacement blade: BA15P carbon steel blade / Made in Japan (TAA designated)
- See more on Amazon...
First Available: 05/29/2019
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.40 x 5.80 x 0.75 inches
See On Amazon #9
Nt Cutter Ic-1500P Circular Cutter, 1.8 Cm - 17 cm
Asin: B001OYA8C6 | Model: h1310508 | PartNumber: h1310508 | Ean: 0643415987117, 4904011011467, 4573410913537 | UPC: 643415987117
Circular Cutter.
Country Of Origin:- China.
Made In: Pvc.
First Available: 01/01/2020
Brand: NT Cutter | Manufacturer: NT CUTTER
Dimensions: 2.32 x 5.12 x 7.52 inches | Weight: 0.24 pounds
See On Amazon #10
NT Cutter Safety Carton Opener with Staple Remover, 1 Opener (R-1200P)
Asin: B000TGCSXC | Model: R-1200P | PartNumber: R-1200P | Ean: 4904011011078
# Of Blade Included: 2.
Good As Carton Opener, Shrink Wrap Cutter, Staple Remover At Warehouses, Factories, Etc..
Made In Japan.
Cutting Material: Plastic Strapping, Stretch Wrap, Bubble Wrap, Packages, Cartons,Etc..
Good For Cutting Strap And Shrink Wrap, Removing Staples, Leather, Etc..
Replacement Blade: Br-400P.
With Staple Remover And Spare Blade Pocket.
Features
- Safety carton opener
- With staple remover and spare blade pocket
- # of blade included: 2
- Replacement blade: BR-400P
- Cutting material: Plastic strapping, stretch wrap, bubble wrap, packages, cartons,etc.
- Good for cutting strap and shrink wrap, removing staples, leather, etc.
- Good as carton opener, shrink wrap cutter, staple remover at warehouses, factories, etc.
- Made in Japan
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.70 x 7.70 x 2.50 inches | Weight: 0.27 pounds
See On Amazon #11
NT CUTTER Double Edged Blade Utility Knife Blade (BC-1P)
Asin: B01D4ARFUA | Model: BC-1P | PartNumber: BC-1P | Ean: 4904011019524
Made Of High Quality Carbon Tool Steel.
1Ea Per Pack. Made In Japan..
Cutting Material: Thin Veneer, Ceiling Tile, Leather, Rubber, Acetates, Cardboard, Thin Floor Mat, Etc..
9Mm W X 19Mm L X 1Mm T.
Features
- Blades for heavy duty Circle cutter (c-2500p, c-3000gp) and large Circle cutter (cl-100p)
- 9mm W x 19mm L x 1mm t
- Made of High quality carbon tool steel
- Cutting material: thin veneer, ceiling Tile, leather, rubber, acetates, cardboard, thin floor mat, etc.
- 1ea per pack. Made in Japan.
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.04 x 0.35 x 0.75 Inches | Weight: 0.00 Pounds
See On Amazon #12
NT Cutter Heavy Duty Aluminum Die-Cast Grip Multi-Blade Cartridge Knife, 1 Knife (L-2000RP), Red.
Asin: B002NUIJN0 | Model: L-2000RP | PartNumber: L-2000RP | Ean: 4904011010392
Blade Size: 18Mm.
# Of Blade Included: 2.
Replacement Blade: Bl-150P, Bl-10P Or Bl-50P (Bl-3000-On Is Also Applicable).
Aluminum Die-Cast Grip / Electrical-Acrylic Metal Coated / Made Of Recycled Materials.
Stainless Steel Blade-Sliding-Track / With Triangle Blade Snapper.
Features An Automatic Blade Lock / With Screw-Stopper.
Multi-Blade Cartridge / Accommodates Up To 6 Blades.
Features
- Heavy duty snap off blade utility knife
- Multi-blade cartridge / Accommodates up to 6 blades
- Blade Size: 18mm
- Features an automatic blade lock / With screw-Stopper
- Aluminum die-cast grip / Electrical-acrylic metal coated / Made of recycled materials
- Stainless steel blade-sliding-track / With triangle blade snapper
- # of blade included: 2
- Replacement blade: BL-150P, BL-10P or BL-50P (BL-3000-ON is also applicable)
- See more on Amazon...
First Available: 10/01/2012
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.80 x 6.20 x 1.60 inches | Weight: 0.29 pounds
See On Amazon #13
NT Cutter Circle Cutter Ex tension Beam for C-1500, 6-1/4 Inches ~ 15-3/4 Inches diameter, 1 Beam (CE-700P)
Asin: B0016V5OMQ | Model: CE-700P | PartNumber: CE-700P | Ean: 4904011011146
Made In Japan.
Dia. 16 - 40Cm (6.30 - 15.75").
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.40 x 9.10 x 0.80 inches | Weight: 0.07 Pounds
See On Amazon #14
NT Cutter Fabric Circle Cutter, 1-3/16 Inches ~ 8-11/16 Inches Diameter, 1 Cutter (C-2000P)
Asin: B009F6CP5S | Model: C-2000P | PartNumber: C-2000P | Ean: 4904011012518
Rotary Blade.
Good For Quilt Making, Applique, Walnut Button, Scrapbooking, Etc.
Made In Japan.
Replacement Blade: Br-18P.
Cutting Material: Cloth, Felt, Denim, Lace, Etc..
# Of Blade Included: 1.
Dia. 3 - 22Cm (1.18 - 8.66").
Features
- Fabric circle cutter
- Dia. 3 - 22cm (1.18 - 8.66)
- Rotary blade
- # of blade included: 1
- Replacement blade: BR-18P
- Cutting Material: Cloth, felt, denim, lace, etc.
- Good for quilt making, applique, walnut button, scrapbooking, etc
- Made in Japan
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 1.50 x 6.90 x 1.30 inches | Weight: 0.14 pounds
See On Amazon #15
NT Cutter RO1000GPUSA 45mm Rolling Cutter with Metal Handle
Asin: B00149F7PO | Model: RO1000GPUSA | PartNumber: RO1000GPUSA | Ean: 4904011010880
Rope Loop.
Made In Japan.
Anti-Slip Grip.
Strong And Durable. Safety Blade Cover.
Features
- Metal construction body
- Strong and durable. Safety blade cover
- Rope loop
- Anti-slip grip
- Made in Japan
- See more on Amazon...
Brand: NT | Manufacturer: NT Cutter
Dimensions: 8.50 x 3.00 x 1.00 Inches | Weight: 0.30 Pounds
See On Amazon #16
NT Cutter Multi-Use Plastic Cutter with Plastic Cutting Blade and Precision Knife Blade, 1 Cutter (M-500P)
Asin: B005TCT794 | Model: M-500P | PartNumber: M-500P | Ean: 4904011011054
# Of Blade Included: Bm-1 X 1, Bm-2 X 1.
Bm-1 Is Also Good For Leather Trimming, Plastic Edge Trim.
Made In Japan.
Cutting Material Of Blade Bm-1: Paper, Card Stock, Soft Film, Leather, Any Other Thin Material.
Cutting Material Of Blade Bm-2: Plastics, Light Ceiling Tiles, Laminates, Plexiglass, Etc..
Replacement Blade: Bm-1, Bm-2.
With A Plastic Cutting Hook Blade (Bm-1) And Precision Knife Blade (Bm-2).
Features
- Multi-use plastic cutter
- With a plastic cutting hook blade (BM-1) and precision knife blade (BM-2)
- # of blade included: BM-1 x 1, BM-2 x 1
- Replacement blade: BM-1, BM-2
- Cutting Material of blade BM-1: Paper, card stock, soft film, leather, any other thin material
- Cutting Material of blade BM-2: Plastics, light ceiling tiles, laminates, plexiglass, etc.
- BM-1 is also good for leather trimming, plastic edge trim
- Made in Japan
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.70 x 5.50 x 0.90 Inches | Weight: 0.08 Pounds
See On Amazon #17
NT Cutter Heavy-Duty Large Circle Cutter, 3-15/16 Inches ~ 39-3/8 Inches Diameter, 1 Cutter (CL-100P)
Asin: B005J0XLIO | Model: CL-100P | PartNumber: CL-100P | Ean: 4904011013164
# Of Blade Included: Bc-400 X 1, Bc-501 X 1.
Cutting Material: Thin Veneer, Ceiling Tile, Leather, Rubber, Acetates, Cardboard, Thin Floor Mat, Etc..
Made In Japan.
Replacement Blade: Bc-400P, Bc-501P (Bc-1P).
Dia. 10 - 100Cm (3.94 - 39.37").
Features
- Heavy duty large circle cutter
- Dia. 10 - 100cm (3.94 - 39.37)
- # of blade included: BC-400 x 1, BC-501 x 1
- Replacement blade: BC-400P, BC-501P (BC-1P)
- Cutting Material: Thin veneer, ceiling tile, leather, rubber, acetates, cardboard, thin floor mat, etc.
- Made in Japan
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 2.00 x 21.10 x 1.80 Inches | Weight: 1.25 Pounds
See On Amazon #18
NT Cutter Large Fabric Circle Cutter, 7-7/8 Inches ~ 39-3/8 Inches Diameter, 1 Cutter (CL-10000P)
Asin: B009F6CI64 | Model: CL-10000P | PartNumber: CL-10000P | Ean: 0793187704211, 4904011012525 | UPC: 793187704211
Rotary Blade.
Good For Quilt Making, Detail Or Curved Cutting On Fabric, Etc.
Made In Japan.
Replacement Blade: Br-28P, Bw-28P.
Cutting Material: Cloth, Felt, Denim, Lace, Leather, Thin Rubber Sheet, Etc..
# Of Blade Included: Br-28P X 2,Bw-28P X 1.
Dia. 20 - 100Cm (7.88 - 39.37").
Features
- Fabric large circle cutter
- Dia. 20 - 100cm (7.88 - 39.37)
- Rotary blade
- # of blade included: BR-28P x 2,BW-28P x 1
- Replacement blade: BR-28P, BW-28P
- Cutting Material: Cloth, felt, denim, lace, leather, thin rubber sheet, etc.
- Good for quilt making, detail or curved cutting on fabric, etc
- Made in Japan
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 3.20 x 21.10 x 1.80 Inches | Weight: 1.50 Pounds
See On Amazon #19
NT L-500GRP NT-Cutter Heavy Duty L-type Blade Model (Price for each)
Asin: B001U6XOFG | Model: 4904010000000 | PartNumber: 4904010000000 | Ean: 4904011010811
Blade Thickness: 0.45 Mm.
Nt Inc. Is A Japanese Company That Manufactures And Sells Nt Cutters, Spare Blades, Dresser, And Industrial Sanders. Nt Sells Goods For Domestic And More Than 100 Foreign Countries. Nt Is Also Developing New Products With Their Own Technology And Unique Ideas. In 1959, Nt Inc. Developed Nt Cutter, Took Out A Patent On It And Started The Sales For Nt Cutter..
Blade Thickness: 0.45 Mm.
Applicable Replacement Blade: Bl-10P / Bl-50P.
Features
- Total length (mm): 157
- Applicable replacement blade: BL-10P / BL-50P
- Blade thickness: 0.45 mm
- Blade thickness: 0.45 mm
- NT Inc. is a Japanese company that manufactures and sells NT Cutters, spare blades, Dresser, and industrial sanders. NT sells goods for domestic and more than 100 foreign countries. NT is also developing new products with their own technology and unique ideas. In 1959, NT Inc. developed NT Cutter, took out a patent on it and started the sales for NT Cutter.
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT
Dimensions: 7.09 x 11.02 x 11.02 Inches | Weight: 0.23 Pounds
See On Amazon
Looking For Something Else?
Search