Volvo Penta SX Silver Gray Metallic Paint 3851219
Asin: B001VM4MXW | Ean: 0780848334214 | UPC: 780848334214
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: Volvo Penta | Manufacturer: VOLVO
Dimensions: 8.00 x 7.00 x 8.00 Inches
See On Amazon Similar To Volvo Penta SX Silver Gray
#1
CM Replace Volvo Penta Transom Seal Kit fits SX Drives 18-2772-1 3853807 3841481 3850426
Asin: B0869G9VPN | Ean: 0664918905897 | UPC: 664918905897
Fits: For Valvo Penta Sx Stern Drives..
Replacement For Part Number 3853807 3841481 3850426.
Replacement For Mallory 9-72931, Replacement For Sierra 18-2772, 18-2786.
Includes: Gimball Bearing Replaces 3853807, U Joint Bellow Replaces 3841481, Sealing Kit Replaces 3852560, Exhaust Bellow Replaces 3850426..
Features
- Transom seal kit replacement for Sierra 18-2772-1 Valvo SX
- INCLUDES: Gimball bearing replaces 3853807, U joint bellow replaces 3841481, Sealing kit replaces 3852560, Exhaust bellow replaces 3850426.
- FITS: For Valvo Penta SX stern drives.
- Replacement for Mallory 9-72931, replacement for Sierra 18-2772, 18-2786
- Replacement for part number 3853807 3841481 3850426
- See more on Amazon...
Brand: CM | Manufacturer: CM
See On Amazon #2
O-Ring Part# 3855081 for Vent or Drain, Part# 3852045 Dipstick Outdrive Lower Unit Gearlube Gearoil Oring 955981& 955974, Fit for Volvo Penta Marine Duo Prop Set SX-M, SX-A, DPS-A Inboard Outboard
Asin: B0CCK1XZMP | Model: 3855081 & 3852045, 955981 & 955974 | PartNumber: 3855081 & 3852045, 955981 & 955974 | Ean: 0701551952472 | UPC: 701551952472
✨[Compatible Models] It Can Perfectly Compatible With Volvo Penta Marine Duo Prop Set Inboard Outboard, Such As Sx-A, Dps-A, Dps-B, Sx-A 1.43, Sx-A 1.51, Sx-A 1.60, Sx-A 1.66, Sx-A 1.79, Sx-A 1.89, Sx-A 1.97, Sx-A 2.18, Dps-A 1.68, Dps-A 1.78, Dps-A 1.95, Dps-A 2.11, Dps-A 2.14, Dps-A 2.32, Dps-B 178, Dps-B 1.95, Dps-B 2.14, Dps-B 2.32 Models And More..
✨[Diy - Save Money] This Kit Has Good Adaptability, And Can Be Perfectly Fit Your Machines; Easy To Install And Can Save You A Lot Of Money..
✨[Premium Quality] Our O-Ring Made Of Quality-Assured Rubber, Not Easy To Deform, Good Resilience And Bearing Capacity, With Long Service Life..
✨[Replaces Volvo Penta Part #] O-Ring 3855081 & 3852045, 955981 & 955974 Vent Or Drain, Dipstick Outdrive Lower Unit Gearlube Gearoil Oring..
Features
- [Product Overview] 5 O-Rings Total, Vent Or Drain, Outdrive Lower Unit Gearlube Gearoil Oring, Fit for Volvo Penta Marine Duo Prop Set SX-M, SX-A, DPS-A Inboard Outboard.
- [Replaces Volvo Penta Part #] O-Ring 3855081 & 3852045, 955981 & 955974 Vent Or Drain, Dipstick Outdrive Lower Unit Gearlube Gearoil Oring.
- [Compatible Models] It can Perfectly Compatible with Volvo Penta Marine Duo Prop Set Inboard Outboard, Such as SX-A, DPS-A, DPS-B, SX-A 1.43, SX-A 1.51, SX-A 1.60, SX-A 1.66, SX-A 1.79, SX-A 1.89, SX-A 1.97, SX-A 2.18, DPS-A 1.68, DPS-A 1.78, DPS-A 1.95, DPS-A 2.11, DPS-A 2.14, DPS-A 2.32, DPS-B 178, DPS-B 1.95, DPS-B 2.14, DPS-B 2.32 MODELS AND MORE.
- [Premium Quality] Our O-ring Made of Quality-assured Rubber, Not Easy to Deform, Good Resilience and Bearing Capacity, with Long Service Life.
- [DIY - Save Money] This Kit has Good Adaptability, and can be Perfectly Fit Your Machines; Easy to Install and can Save You a lot of Money.
- See more on Amazon...
Brand: WFCYX | Manufacturer: WFCYX
Dimensions: 0.08 x 0.60 x 0.60 inches
See On Amazon #3
Meruzue 14 1/2'' X 19'' fit Volvo Penta SX Drive All Models Engines 130-300 HP OEM NO.3817468 Upgrade Aluminum Outboard Propeller 3 Blades 19Spline Tooth,RH
Asin: B0C6JPWZDH | Ean: 0654370950351 | UPC: 654370950351
【Quality Assurance】An Efficient Outboard Propeller Reduces Fuel Consumption, Increases Boat Availability And Durability, As Well As Increases Boat Speed And Improves Maneuverability.
【Quality Service】We Accept Returns Free Of Charge. If You Have Any Problems With The Ship Propeller You Purchased, Please Contact Us And We Will Reply To Your Email Within 24 Hours..
【Compatibility】Choose A Marine Propeller That Is Compatible With Your Boat's Engine. The Propeller Should Match The Engine's Horsepower, Gear Ratio, And The Number Of Splines On The Propeller Shaft..
【Product Usage】This Outboard Propeller Is Suitable Fit Volvo Penta Sx Drive All Models,Upgraded Materials To Make It More Durable..
Features
- Product parameter NO.3817468,19 Spline Tooth,14 1/2 Diameter x 19 Pitch,3 Blades,Right hand rotation,Upgrade Aluminum material for better quality.
- Product usage This outboard propeller is suitable fit Volvo Penta SX Drive All models,Upgraded materials to make it more durable.
- Quality assurance An efficient outboard propeller reduces fuel consumption, increases boat availability and durability, as well as increases boat speed and improves maneuverability
- Compatibility Choose a Marine propeller that is compatible with your boat's engine. The propeller should match the engine's horsepower, gear ratio, and the number of splines on the propeller shaft.
- Quality service We accept returns free of charge. If you have any problems with the ship propeller you purchased, please contact us and we will reply to your email within 24 hours.
- See more on Amazon...
Brand: Meruzue | Manufacturer: Meruzue
See On Amazon #4
sevencow 99022 Skeg Guard for Volvo Penta Sterndrive SX Drive Single Prop 1995-2006 Safe-Skeg Protector Marine-Grade Stainless Steel
Asin: B09HT28MMJ
Easy To Install : With No Welding And No Epoxies Required, Replaces A Broken Skeg With As Little As 2-3 Inches Of Skeg Remaining.Our Inboard/Outboard Skeg Protector Installs In As Little As 10 Minutes! Built For A Custom Fit To The Motor, Just Slide And Tap It Into Place, Drill Your Holes And Tighten The Locking Bolts..
Kit Includes: 1*Skeg Guard And Installation Accessories..
High Quality : Made Of Mirror-Polished 18-Gauge Marine-Grade 316 Stainless Steel, Comes With Male & Female Stainless Locking Screws..
Advantage : Inboard Skeg Protection Against Reef, Rock And Ramp Damage.Can Cover An Already Damaged Skeg,Also Includes A Drain Hole To Prevent Corrosion..
Features
- Application : For Volvo Penta SX Drive Single Prop 1995-2006.NOTE: this skeggard will not fit 250, 270, 280 out drive. Replace part number 99022.
- Advantage : Inboard Skeg Protection Against Reef, Rock and Ramp Damage.Can Cover an Already Damaged Skeg,Also includes a drain hole to prevent corrosion.
- Easy to install : With no welding and no epoxies required, Replaces a Broken Skeg with as Little as 2-3 Inches of Skeg Remaining.our inboard/outboard skeg protector installs in as little as 10 minutes! Built for a custom fit to the motor, just slide and tap it into place, drill your holes and tighten the locking bolts.
- High quality : Made of Mirror-POLISHED 18-Gauge Marine-Grade 316 Stainless Steel, Comes with Male & Female Stainless Locking Screws.
- Kit includes: 1*Skeg Guard and Installation accessories.
- See more on Amazon...
Brand: sevencow | Manufacturer: Wen wen top
See On Amazon #5
US Marine Products Magnesium Anode Kit Fits Volvo Penta SX and DP-SM Volvo SX and DP-SM Includes Hardware Replaces Volvo 3855411M, 3854130M, Martyr CMSXKITM, Seachoice 95381, Tecnoseal 20708MG
Asin: B09LWMPNZX | Ean: 0850037024100 | UPC: 850037024100
Brand: US Marine Products | Manufacturer: US Marine Products LLC
See On Amazon #6
99022 Skeg Guard For Volvo Penta SX Drive Single Prop 1995-2006 Inboard Skeg Protector Shield DIY Installation
Asin: B09HWP3T6M
【Upgraded Design】 The Reinforced Lower Edge Helps Ensure Protection Against Damage, While The Drainage Holes Helps Reduce Water Retention Help To Prevent Corrosion And Rust...
【Slide-Drill-Bolt Installation】Our Inboard/Outboard Skeg Protector Installs In As Little As 10 Minutes! Just 3 Steps, . You Just Slide The Skeg Guard Into The Skeg And Tap It Into Place, Drill Your Holes And Tighten The Locking Bolts. No Welding And No Epoxies Required.
【Material】Made With High Quality 18 Gauge 316 Marine Stainless Steel With A Polished Mirror Finish, This Skeg Guard Delivers Long-Lasting Performance And Strength..
【Function】Repair Or Replace Your Boat's Skeg To Keep The Prop Protected With Our Skeg Guard For Volvo Penta Sx Drive Single Prop Engines..
Features
- Application Skeg Shield is designed to repair or replace the skeg for prop protection. Compatible for Volvo Penta SX Drive Single Prop engines made between 1995 and 2006
- Function Repair or replace your boat's skeg to keep the prop protected with our Skeg Guard for Volvo Penta SX Drive Single Prop Engines.
- Upgraded Design The reinforced lower edge helps ensure protection against damage, while the drainage holes helps reduce water retention help to prevent corrosion and rust..
- Material Made with high quality 18 gauge 316 marine stainless steel with a polished mirror finish, this skeg guard delivers long-lasting performance and strength.
- Slide-Drill-Bolt Installation Our inboard/outboard skeg protector installs in as little as 10 minutes! Just 3 steps, . You just slide the skeg guard into the skeg and tap it into place, drill your holes and tighten the locking bolts. No welding and no epoxies required
- See more on Amazon...
Brand: Sunluway | Manufacturer: Sunluway
See On Amazon #7
Transom Seal Kit for Volvo Penta SX Drives Replace Sierra 18-2772-1 18-2772 18-2786 Mallory 9-72931 3853807 3841481 3850426
Asin: B08D8ZBNJ3
Includes: Gimball Bearing Replaces 3853807, U Joint Bellow Replaces 3841481, Sealing Kit Replaces 3852560, Exhaust Bellow Replaces 3850426..
Ensure: If There Is Any Problem With The Product, Please Do Not Hesitate To Contact Us, We Will Help You Solve The Problem..
Note: Not For Sx-A Drives..
Replaces: Sierra 18-2772-1, 18 2772 1, 1827721, 18-2772, 18 2772, 182772, Mallory 9-72931, 9 72931, 972931..
Features
- FITS: For Volvo Penta SX stern drives.
- REPLACES: Sierra 18-2772-1, 18 2772 1, 1827721, 18-2772, 18 2772, 182772, Mallory 9-72931, 9 72931, 972931.
- INCLUDES: Gimball bearing replaces 3853807, U joint bellow replaces 3841481, Sealing kit replaces 3852560, Exhaust bellow replaces 3850426.
- NOTE: Not for SX-A drives.
- ENSURE: If there is any problem with the product, please do not hesitate to contact us, we will help you solve the problem.
- See more on Amazon...
Brand: DEF | Manufacturer: DEF
See On Amazon #8
The ROP Shop | Trim Sender Sensor, 2-Wire for Volvo Penta SX-M, SX-C, SX-C1, SX-C2, DP-S, DP-SM
Asin: B0938R6YMY | Model: 101603_11 | PartNumber: 101603_11
Includes - (1) Trim Sender Sensor, 2-Wire; Comes As Shown In The First Image.
Please Be Sure To Check Your Part Or Model Number And Spec Information To Ensure This Is The Correct Trim Sender Sensor For Your Unit (This Is The 2-Wire Version, Some Models Use A 3-Wire Version). Also, Please Note This May Replace Multiple Part Numbers.
Fits/For: 1995 Omc Sterndrives & Volvo Penta Sx-M, Sx-C, Sx-C1, Sx-C2, Dp-S & Dp-Sm Model Transom Assemblies That Use A 2-Wire Sensor (Will Not Fit Early Model Sx-S Or Late Model Sx-A Or Dps-A Sterndrives).
Specs - Type: 2-Wire. Refer To Image 2 For More Information.
Features
- The ROP Shop replacement Trim Sender Sensor, 2-Wire for Volvo Penta SX-M, SX-C, SX-C1, SX-C2, DP-S, DP-SM
- Specs - Type: 2-Wire. Refer to image 2 for more information
- Includes - (1) Trim Sender Sensor, 2-Wire; comes as shown in the first image
- Fits/For: 1995 OMC Sterndrives & Volvo Penta SX-M, SX-C, SX-C1, SX-C2, DP-S & DP-SM model transom assemblies that use a 2-wire sensor (will NOT fit early model SX-S or late model SX-A or DPS-A sterndrives)
- Please be sure to check your part or model number and spec information to ensure this is the correct trim sender sensor for your unit (this is the 2-wire version, some models use a 3-wire version). Also, please note this may replace multiple part numbers
- See more on Amazon...
Brand: The ROP Shop | Manufacturer: The ROP Shop
See On Amazon #9
Skeg Guard Safe-Skeg Protector Tool Kit Fit for Volvo Penta Sterndrive SX Drive Single Prop 1995-2006 Inboard Skeg Protection Against Reef, Rock and Ramp Damage, Replace for Skeggard 99022 99052
Asin: B09K75GFH1
Material: This Skeg Guard Protector Is Made Of 316 Marine Grade Stainless Steel, Treated With Anti-Oxidation And Anti-Corrosion, Sturdy And Durable. Self Draining, Comes With Male & Female Stainless Locking Screws..
Satisfaction Guarantee: 100% Satisfaction Guarantee. Please Feel Free To Contact Us If You Have Any Questions About Our Product..
Installation: Easy To Install, Self Draining, Comes With Male & Female Stainless Locking Screws. Save Your Time And Money..
Function: Repair Or Replace Your Boat's Skeg To Keep The Prop Protected With The Skegshield Skeg Guard For Volvo Penta Sx Drive Single Prop Engines. The Reinforced Lower Edge Helps Ensure Protection Against Damage. Avoid Causing Corrosion, And Protect The Marine Environment..
Features
- APPLICATION: This inboard skeg protector fits for Volvo Penta sterndrive skeg guard model - SX Drive (Single Prop) 1995-2006 (part#99022). Note that this skeg safeguard will not fit 250, 270, 280 outdrive.
- FUNCTION: Repair or replace your boat's skeg to keep the prop protected with the SkegShield Skeg Guard for Volvo Penta SX Drive Single Prop Engines. The reinforced lower edge helps ensure protection against damage. Avoid causing Corrosion, and protect the marine environment.
- MATERIAL: This skeg guard protector is made of 316 marine grade stainless steel, treated with anti-oxidation and anti-corrosion, sturdy and durable. Self draining, comes with male & female stainless locking screws.
- INSTALLATION: Easy to install, self draining, comes with male & female stainless locking screws. Save your time and money.
- Satisfaction Guarantee: 100% satisfaction guarantee. Please feel free to contact us if you have any questions about our product.
- See more on Amazon...
Brand: Hihitomorrow | Manufacturer: Hihitomorrow
Dimensions: 2.17 x 17.72 x 6.69 inches
See On Amazon
Looking For Something Else?
Search