Gas Props & Hardware (Rv_Designer)
Asin: B002E8NDP0 | Ean: 0656166500412 | UPC: 656166500412
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: Unknown
Dimensions: 2.00 x 20.00 x 0.30 inches | Weight: 1.00 Pounds
See On Amazon Similar To Gas Props Hardware Rv_Designer
#1
RV Designer G21, Gas Prop Door Support, 20 inch, 10 lb. Load Capacity, Exterior Hardware, regular
Asin: B002XM5E6S | Model: G21 | PartNumber: G21 | Ean: 0601320101905, 0700115586481 | UPC: 601320101905, 700115586481
One Gas Prop Per Package, 20 Inch Extended Length, 10 Lbs Force.
If There Are 2 Props, Replace Them Both To Keep Door Feet Balanced.
Replace Your Gas Prop By Matching Its Length And Force As Close As Possible.
Features
- Commonly used on RV entry doors
- Replace your gas prop by matching its length and force as close as possible
- One gas prop per package, 20 inch extended length, 10 lbs force
- If there are 2 props, replace them both to keep door feet balanced
- See more on Amazon...
First Available: 03/21/2014
Brand: RV Designer | Manufacturer: RV Designer
Dimensions: 0.50 x 23.00 x 2.00 inches | Weight: 0.40 pounds
Warranty: Contact Manufacturer
See On Amazon #2
RV Designer H277, Door Support Strut, Plastic, Spring-Loaded, 6-1/4 inch, 2 Per Pack, Cabinet Hardware , Black
Asin: B009HQ7X6W | Model: H277 | PartNumber: H277 | Ean: 0700360087436, 0601320472777, 0700115581141 | UPC: 700115581141, 700360087436, 601320472777
Spring Loaded, Plastic And Metal, To Hold Overhead Doors Open.
Package Of 2.
Holder Dimensions: 6-1/4" L X 1-1/4" W X 1" H.Mount Holes On The Bracket Are Spaced 7/8" Apart.Mounting Eye Hole Is 6" From The Base Of The Bracket.Screw Sizes: (4) Measure 5/8" Long And (2) Measure 1" L.
6-1/4 Inch.
Rv Designer Cabinet Door Support.
Features
- Universal
- RV Designer Cabinet Door Support
- Spring loaded, plastic and metal, to hold overhead doors open
- 6-1/4 inch
- Package of 2
- Holder Dimensions: 6-1/4 L x 1-1/4 W x 1 H.Mount holes on the bracket are spaced 7/8 apart.Mounting eye hole is 6 from the base of the bracket.Screw Sizes: (4) measure 5/8 long and (2) measure 1 L
- See more on Amazon...
First Available: 09/01/2017
Brand: RV Designer | Manufacturer: RV Designer
Dimensions: 7.38 x 0.75 x 1.00 inches | Weight: 0.10 Pounds
Warranty: Manufacturer
See On Amazon #3
C16-08568 20 inch 20lb Per Gas Strut Shock Lift Support Replacement for RV Door Motorhome Door Compartment Door Cargo Door and other DIY Applications, Set of 2 Vepagoo
Asin: B08FJ1184X | Model: SH301A | PartNumber: SH301A | Ean: 0746827173113, 0724500131605 | UPC: 724500131605, 746827173113
【High Quality And Durability】20 Inch Gas Strut With Qpq Processing Offers Superior Durability And Multiple Oil Seals.Worthy Of Your Trust. Please Note You Couldn’T Compress Gas Spring By Your Hand!.
【12+1 Months Replacement Service】We Offer A 12+1 Months Replacement Service. If You Encounter Any Issues, Please Click "Ask Seller" Beside Your Order For In-Time Assistance..
【Multiple Applications】Gas Struts 20 Inch Are Available In A Variety Of Applications.You Can Use It For Rv Storage Compartments, Tanning Bed, Cargo Door，Outdoor Tv Cabinet,Trunk Bulkhead,Shed Window, Heavy Lid, Garbage Bin Cover And Other Diy Applications..
【Interchange Number】C1608568, C16-08568, Cs2000-20-S, Eaa870020u, Eaa-8700-20U, Se197p20..
Features
- Specification Extended Length: 19.7in. Compressed Length: 11.8in; Force: 20 Lb per shock. Mounting Hardware Needed: 10MM ball stud mounting bracket. Please note the package does not include mounting hardware.
- Interchange Number C1608568, C16-08568, CS2000-20-S, EAA870020U, EAA-8700-20U, SE197P20.
- High quality and Durability 20 inch gas strut with QPQ processing offers superior durability and multiple oil seals.Worthy of your trust. Please note you couldn t compress gas spring by your hand!
- Multiple applications Gas struts 20 inch are available in a variety of applications.You can use it for RV storage compartments, tanning bed, cargo door outdoor TV cabinet,trunk bulkhead,shed Window, heavy lid, garbage bin cover and other DIY applications.
- 12+1 Months Replacement Service We offer a 12+1 months replacement service. If you encounter any issues, please click Ask Seller beside your order for in-time assistance.
- See more on Amazon...
Brand: Vepagoo | Manufacturer: Vepagoo
See On Amazon #4
AUTOVIC Camper RV Propane Tank 20Lbs Hold Down Bracket Holder Tank Hook Kit For RV Trailer Coleman Fleetwood Pop Up
Asin: B0B8RXVL59
Function: Holds The Weight Of Two Tanks, Hold-Down Brackets Keep Tanks Securely In Place While Your Vehicle Is In Motion.
Package Included: 1 Set Propane Tank Hold Down Brackets.
Best Choice: This Mounting Bracket Is The Best Way To Carry 20 Lbs. Propane Tank On Your (For)Rv, Trailer, Or Boat.
Feature: The Brackets' Surface Galvanized For An Added Layer Of Protection And Durability.
Features
- Excellent Material: Made of high quality iron, durable enough to afford 20Lbs tank
- Feature: The brackets' surface galvanized for an added layer of protection and durability
- Function: Holds the weight of two tanks, hold-down brackets keep tanks securely in place while your vehicle is in motion
- Best Choice: This mounting bracket is the best way to carry 20 lbs. Propane tank on your (for)RV, trailer, or boat
- Package Included: 1 Set Propane Tank Hold Down Brackets
- See more on Amazon...
Brand: AUTOVIC | Manufacturer: AUTOVIC
See On Amazon #5
RV Designer E378, Plug for Fridge Drain Hose, 2 Per Pack, Exterior Hardware
Asin: B004ME4952 | Model: E378 | PartNumber: E378 | Ean: 0601320983785 | UPC: 601320983785
Easy To Install.
Used To Keep Dirt And Insects Out.
Brand: RV Designer | Manufacturer: RV Designer
Dimensions: 5.00 x 1.00 x 1.00 Inches | Weight: 0.01 pounds
Warranty: Manufacturer.
See On Amazon #6
RV - Cabinet Hardware Door Strut Spring Loaded - Set of Two (2 Pack) - Metal
Asin: B07GYMN347 | Ean: 0721107849650 | UPC: 721107849650
6-1/4".
No Screws Included.
Spring Loaded.
Used To Hold Spring-Loaded Cabinet Doors In Open Position.
Features
- RV Door Strut
- Used to hold spring-loaded cabinet doors in open position
- 6-1/4
- spring loaded
- No screws included
- See more on Amazon...
Brand: H. Bowes | Manufacturer: Hamilton Bowes
Dimensions: 0.50 x 6.50 x 2.50 inches
See On Amazon #7
Atwood 52910 Kit - SVC Hardware Bi-Fold Cover
Asin: B07DWFC2H5 | Model: 52910 | PartNumber: 52910 | Ean: 0680332992060 | UPC: 680332992060
Please Ensure Part Will Fit Before Ordering.
Designed For Quick And Simple Installation.
Part Number: 52910.
Features
- Brand: Atwood.Fit Type: Universal Fit
- Part Number: 52910
- Please ensure part will fit before ordering
- Designed for quick and simple installation
- See more on Amazon...
Brand: Atwood | Manufacturer: Atwood
See On Amazon #8
RecPro RV Propane Tank Retainer Wing Nut LP Wingnut
Asin: B08MV8GDCD | Ean: 0193652046844 | UPC: 193652046844
Made Of Durable Galvanized Steel With A Mill Finish, It Looks Sleek And Simple And Will Stay In Good Condition For Years To Come..
It Measures 6 ½” Wide By 2” Long By 1” High..
Features
- This RV LP wing handle is the last step in securing your LP tank to the mounting bracket and rod, using the nut to secure in place.
- It measures 6 wide by 2 long by 1 high.
- Made of durable galvanized steel with a mill finish, it looks sleek and simple and will stay in good condition for years to come.
- See more on Amazon...
Brand: RecPro | Manufacturer: RecPro
Dimensions: 1.00 x 6.50 x 2.00 inches
See On Amazon #9
Marshall Excelsior RVBAR Hold-Down Bar Heavy Duty - ME-RVBAR
Asin: B00C5RDM5Q | Model: ME-RVBAR | PartNumber: ME-RVBAR | Ean: 0815505012447, 0207673968013 | UPC: 207673968013, 815505012447
Item Package Weight:0.326 Kg.
Country Of Origin: United States.
Item Package Dimension:2.7 Cm L X3.6 Cm W X28.2 Cm H.
Features
- Product Type:Non Riding Toy Vehicle
- Item Package Dimension:2.7 cm L X3.6 cm W X28.2 cm H
- Item Package Weight:0.326 kg
- Country Of Origin: United States
- See more on Amazon...
Brand: Marshall Excelsior | Manufacturer: AP PRODUCTS
Dimensions: 6.75 x 24.00 x 9.00 inches
See On Amazon #10
ASTAMOTOR 20 lbs RV Propane Tank Mount Holder Bracket Kit Fit for Coleman Fleetwood Pop Up Camper Trailer, Pair
Asin: B0C7MTFHFY | Model: 526-1 | PartNumber: 526-1
【Adjustable】With The Wing Nut And Washer, The Height Can Be Adjusted At The Bottom Thread Position In Order To Accommodate Different Sizes Of Propane Tanks..
【Warranty】One-Year Warranty. If You Have Any Questions, Please Contact Us Via Amazon Message Directly, Our Professional Customer Service Would Help In 24H..
【High Quality】Made Of High Quality Steel With Galvanized Coat, Which Is Durable And Corrosion-Resistant..
【Specification】The Overall Length Is 16 3/4 Inches With 2 Inches Threads At The Bottom. The Pair Of Tank Holders Can Support Up To 20 Lbs Propane Tank Of Coleman Fleetwood Campers And Others..
Features
- Function The propane tank brackets can hold the tank or cylinder firmly in place while the vehicle is moving.
- Specification The overall length is 16 3/4 inches with 2 inches threads at the bottom. The pair of tank holders can support up to 20 lbs propane tank of Coleman Fleetwood campers and others.
- Adjustable With the wing nut and washer, the height can be adjusted at the bottom thread position in order to accommodate different sizes of propane tanks.
- High Quality Made of high quality steel with galvanized coat, which is durable and corrosion-resistant.
- Warranty one-year warranty. If you have any questions, please contact us via Amazon Message directly, our professional customer service would help in 24H.
- See more on Amazon...
Brand: ASTAMOTOR | Manufacturer: ASTAMOTOR
See On Amazon #11
ARANA 20 inch 300 N/67 LB Gas Struts Spring Shocks with Mounting Bracket 20" Gas Props Lift Support for RV Camper Bed Cover RV Hatch Trailer Roof Trap Door TV Cabinet Box Lid (Fit 55-75lbs Lid), 2Pcs
Asin: B08X6CJKXP | Model: 20 inch 300 N/67 LB Gas Struts | PartNumber: 20 inch 300 N/67 LB Gas Struts | Ean: 0746827168171 | UPC: 746827168171
✅Arana Gas Props With Brackets - Arana 20" Struts Are Designed With L Type Mounting Brackets, All The Ball Ends And Brackets Could Be Unscrewed And Rotated To Suit For Different Installation Demands;.
✅ About Installation & Support - Once You Need Any Installation Guide, Welcome To Message Us For In-Time Help; If There Are Any Product Defects, Unfit Problem Or Part Missing, 18 Months Replacement Support Will Be Provided If Let Arana Know!.
✅20 Inch Lift Support Struts - Arana 20 Inch 67Lb Struts Are Widely Used On Your Camper Bed, Rv Bed, Rv Hatch, Storage Box Lid, Basement Door, Floor Hatch, Tv Cabinet, Boat Deck, Diy Builds, Etc, As Long As The Lid Weight Is Between 55-75 Pounds;.
✅20" Gas Lift Struts 300N - Arana 20" 67Lb Gas Shocks Will Be Suitable For The Lid Weight Between 55-75Lbs, Side Length ≥ 32 Inch; Note: Do Measure The Lid Weight To Avoid Buy Wrong Items, Please Measure At The Position Where You Will Install Struts;.
Features
- Gas Struts 20 inch 67lb - Extended Length A (Center-to-Center):19.7 inch(500.mm), compressed length B (Center-to-Center): 11.8 inch(300mm), Force 300N/67Lb Per Strut, 2 Struts Per Pair; Package contents: 2 * struts, 4 * L brackets, 4 * nuts, 1 * Installation Instruction..
- 20 Gas Lift Struts 300N - ARANA 20 67lb gas shocks will be suitable for the lid weight between 55-75lbs, side length 32 inch; Note: DO measure the lid weight to avoid buy wrong items, please measure at the position where you will install struts;
- ARANA Gas Props with Brackets - ARANA 20 struts are designed with L type mounting brackets, all the ball ends and brackets could be unscrewed and rotated to suit for different installation demands;
- 20 inch Lift Support Struts - ARANA 20 inch 67lb struts are widely used on your camper bed, RV bed, RV Hatch, storage box lid, basement door, floor hatch, TV cabinet, boat deck, DIY builds, etc, as long as the lid weight is between 55-75 pounds;
- About installation & support - once you need any installation guide, welcome to message us for in-time help; if there are any product defects, unfit problem or part missing, 18 months replacement support will be provided if let ARANA know!
- See more on Amazon...
Brand: ARANA | Manufacturer: ARANA
Dimensions: 0.39 x 1.97 x 0.39 inches
See On Amazon #12
2 Truck Upfitters 12" Gas Props (12.2" ext, 7.5" comp, 40 lbs ea) for are Snugtop Leer Camper Doors & ONLY Aluminum Weatherguard ONLY Toolboxes. Measurement REQ'D! Incl 4 Ball mounts!
Asin: B074PYKFCY | Model: 12”, 40 lbs | PartNumber: 12”, 40 lbs | Ean: 0709832096709 | UPC: 709832096709
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Not For Steel Toolboxes- Will Not Hold Up Lid. Fit Most Weatherguard Aluminum Truck Bed Toolboxes Only, Models 121-0-01, 121-5-01, 123-0-01, 123-5-01, 127-0-01, 127-5-01, 131-0-01, 131-5-01, 137-0-01, 137-5-01, 147-0-01, 147-5-01, 154-0-01, 154-5-01. Compatible With Many Truck Canopy Types, Including Leer, Are, Century, Snugtop, And Atc Tops, & Many Other Brands That Utilize Gas Shocks / Gas Springs / Gas Lifts. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, & Suspa..
Equivalent To Suspa #C16-11028, Stabilus #19068, Or Weatherguard 7009-2Pk . Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors & Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Other Toolbox Struts, Etc. These Gas Shock Lift Supports Can't Be Compressed By Hand. They Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position..
Truck Upfitters Pair (2 Total) Of 40 Pound (Each) Gas Struts. 12.2" Extended Length And 7.5" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 40 Lbs Of Pressure, For A Total Of 80 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 80 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 50-70 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair (2 total) of 40 pound (each) gas struts. 12.2 extended length and 7.5 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 40 lbs of pressure, for a total of 80 lbs of pressure. Please note that this does not mean that it can lift something that is 80 lbs. the typical hinged-style door weight for this prop is approximately 50-70 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Equivalent to Suspa #C16-11028, Stabilus #19068, or Weatherguard 7009-2PK . Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors & awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, other toolbox struts, etc. These gas shock lift supports CAN'T be compressed by hand. They MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position.
- NOT FOR STEEL TOOLBOXES- WILL NOT HOLD UP LID. Fit most Weatherguard ALUMINUM truck bed toolboxes ONLY, models 121-0-01, 121-5-01, 123-0-01, 123-5-01, 127-0-01, 127-5-01, 131-0-01, 131-5-01, 137-0-01, 137-5-01, 147-0-01, 147-5-01, 154-0-01, 154-5-01. Compatible with many truck canopy types, including LEER, ARE, Century, Snugtop, and ATC tops, & many other brands that utilize gas shocks / gas springs / gas lifts. Compatible with many gas lift brands, including stabilus, lift o mat, & Suspa.
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 2.00 x 12.50 x 0.50 Inches | Weight: 0.69 pounds
See On Amazon #13
2 Pack Extended 10 inch Gas Prop Force 50N/11LB Gas Struts Black Gas Springs/Window Lift and Lid Support/Gas Shocks for RV Bed Platform/Floor Hatch/Outdoor Bench/Cabinet/Tool Box/Truck Canopy
Asin: B086JLLSB3 | Ean: 0733810081555 | UPC: 733810081555
★Available Working Temperature :-11℃~50℃/12℉-122℉, Up To 50,000 Times Of Factory Inspections.
★If You Have Any Problem, Please Don't Hesitate To Contact Us, We'll Reply Within 24 Hours.
★Manufacturer-Direct Sales: High Quality, Reasonable Price.
★Force:50N/11Lbs(Per Strut), Length (From Hole Center To The Other): 9-11/16 '', Travel: 3-14/25 '', Distance Between Ball Mounts Compressed; 6-1/8''.
Features
- Stable Support: Lids soft open gently, angle up to 100 degrees. NOT SOFT CLOSE
- Force:50N/11lbs(Per Strut), Length (From hole center to the other): 9-11/16 '', travel: 3-14/25 '', distance between ball mounts compressed; 6-1/8''
- Available working temperature :-11 ~50 /12 -122 , Up to 50,000 times of factory inspections
- Manufacturer-Direct Sales: High quality, Reasonable price
- If you have any problem, please don't hesitate to contact us, we'll reply within 24 hours
- See more on Amazon...
Brand: NIDAYE | Manufacturer: NIDAYE
See On Amazon #14
ARANA 20 inch 10 lb/45 N Gas Struts Spring Shocks 2 Pcs 20" 45N Gas Props Lift Supports for RV Door Camper Door Motorhome Door Trailer Door Cabinet Door Light Duty Tool Box Lid (Super Light)
Asin: B098K2B82X | Model: ara_398 | PartNumber: ara_398
✅20 Inch 10 Pound Gas Props -- You Can Use The Gas Spring On Your Rv Door, Camper Door, Motorhome Door,Basement Door, Trailer Door, Cabinet Doorvery Light Duty Tool Box Lid And Diy Builds! Measurement First Required For Your Project Lid Before Purchasing!.
✅18 Months Replacement/Refund Support--If You Unluckily Encounter With Missing Parts, Broken Ball Connectors Or Unfit Problem, Just Click "Ask A Question" At Out Store Page, We Will Provide You With The Best Solution Without Your Returning The Previous Package!.
✅20" 10Lb Gas Shocks -- Replace Your Gas Prop By Matching Its Length And Force As Close As Possible. Note: Please Replace The Two Struts Both To Keep Door Lift Balanced..
✅ 20 Inch 10 Lbs Lift Supports -- 2Pcs Shocks Include, Force 10Lbs Per Strut, 20Lbs Per Pair. Most Suitable Support Weight For One Pair Is 8-11 Pounds!If Your Lid Weight Is Out Of This Range, We Have 20 Inch Struts Of Different Pressure 20Lb/40Lb/60Lb/80Lb/100Lb/120Lb/135Lb/150Lb/180Lb/200Lb For Your Various Choice; Note: Do Not Compress Them By Hands Before Installing, The Struts Could Only Be Compressed After Installing..
Features
- 10 Lbs Per Shock Lift Supports-Extended Length: 19.7"(500mm), Compressed Length: 11.8"(300mm), Package include: 2 struts. Reference numbers: LGP6-200-10 NOTE: If the lid weight is more than 11 pounds, please choose other pressure struts!!!
- 20 inch 10 lbs Lift Supports -- 2Pcs shocks include, Force 10lbs Per Strut, 20lbs Per Pair. Most suitable SUPPORT weight for ONE pair is 8-11 Pounds!If your lid weight is out of this range, we have 20 inch struts of different pressure 20lb/40lb/60lb/80lb/100lb/120lb/135lb/150lb/180lb/200lb for your various choice; Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing.
- 20 inch 10 pound Gas Props -- You can use the gas spring on your RV Door, Camper Door, Motorhome Door,Basement Door, Trailer Door, Cabinet DoorVery Light Duty Tool Box Lid and DIY builds! Measurement first required for your project lid before purchasing!
- 20 10lb Gas Shocks -- Replace your gas prop by matching its Length and Force as close as possible. Note: Please replace the two struts both to keep door lift balanced.
- 18 Months Replacement/Refund Support--If you unluckily encounter with missing parts, broken ball connectors or unfit problem, just click Ask a Question at out store page, we will provide you with the best solution without your returning the previous package!
- See more on Amazon...
Brand: ARANA | Manufacturer: ARANA
See On Amazon #15
LC LICTOP 6 Pcs Soft Close Lid Support 80N Hydraulic Gas Spring Cabinet Door Safety Lift Support (Black)
Asin: B07KNVBSNX | Model: LXMY0947 | PartNumber: LXMY0947 | Ean: 0754021106066 | UPC: 754021106066
Support To Open The Cover, The Maximum Angle Is 100 Degrees, The Contact Area With The Cabinet Is Large, Three Points Positioning, The Installation Is More Secure..
Application: Gently Cover The Lid, Ideal For Soft Closing The Lid To Prevent Slamming, So It Won't Hurt Your Child's Fingers.Suitable For Cabinets, Bookcases, Wardrobes, Window Sills Or Platforms, Etc., Upper Support..
Cylinder Block And Connecting Rod: The High-Strength Material Piston Cylinder Body Is Integrated With The Bottom Plate Connecting Rod, The Load Is Larger, And The Switch Is Flexible..
Lid Stay Force: 80N (Per Strut); Length: (Hole Center To Hole Center): 10.5 Inches; Pressure: 18 Pounds (One Pillar).
Features
- Package Included:6 X soft close lid support 80 N(black)
- Lid stay force: 80N (per strut); length: (hole center to hole center): 10.5 inches; pressure: 18 pounds (one pillar)
- Support to open the cover, the maximum angle is 100 degrees, the contact area with the cabinet is large, three points positioning, the installation is more secure.
- Cylinder block and connecting rod: The high-strength material piston cylinder body is integrated with the bottom plate connecting rod, the load is larger, and the switch is flexible.
- Application: Gently cover the lid, ideal for soft closing the lid to prevent slamming, so it won't hurt your child's fingers.Suitable for cabinets, bookcases, wardrobes, window sills or platforms, etc., upper support.
- See more on Amazon...
Brand: LC LICTOP | Manufacturer: LC LICTOP
See On Amazon #16
JR Products 07-30475 Metal Hold Down Bar
Asin: B00T36F94Y | Model: 07-30475 | PartNumber: 07-30475 | Ean: 0756815624572 | UPC: 756815624572
Model# 07-30475.
Galvanized Steel.
Used For Securing Lp Tanks To Rv.
Package Of 1.
First Available: 03/28/2015
Brand: JR Products | Manufacturer: JR Products
Dimensions: 0.80 x 1.25 x 1.00 Inches
See On Amazon #17
30N/6.8 lb Gas Strut Cabinet Hinge Safety Lift Support, Soft Open & Down Lid Support & Buffer Telescopic Cabinet Door Glue Head Gas Spring Supports 6 inch Length (4 Pack)
Asin: B08M3G47DR | Ean: 0793481866738 | UPC: 793481866738
【Application】:Hydraulic Support, Automatic Expansion. Applicable To Electric Meter Box, Decoration Picture, Cupboard Door, Furniture Door, Mechanical Door, Upturned Door, Tatami, Tip-Up Door, Drop Down Door Fire Box, Dustbin Etc..
【Package Included】: 4 Hydraulic Gas Struts With Mounting Hardware; Enjoy Our Hassle-Free 90-Day Warranty And Friendly Customer Service.
【Features】: Convenient To Open And Close, Lift Cabinet Doors, Etc. Quiet, Soft, Convenient And Safe. The Maximum Angle Is 100 Degrees.Great For Supporting The Lid To Keep It Open..
【Specification】: Load Bearing: 3-4Kg; Pressure: 30N; Extendable Length: 0-55Mm; Total Length (Approx. ): 190Mm/7.48".
Features
- High quality : support hinge is made of high-quality stainless steel and nylon materials, solid vacuum hydraulic core, which has very high pressure resistance and is not easy to deform. durable and practical, long service life. ontains mounting screws for easy installation.
- Specification : Load Bearing: 3-4kg; Pressure: 30N; Extendable length: 0-55mm; Total Length (Approx. ): 190mm/7.48
- Application :Hydraulic support, automatic expansion. Applicable to Electric meter box, decoration picture, Cupboard door, Furniture door, Mechanical door, Upturned door, Tatami, Tip-up door, drop down door Fire box, Dustbin etc.
- Features : Convenient to open and close, lift cabinet doors, etc. Quiet, soft, convenient and safe. the maximum angle is 100 degrees.Great for supporting the lid to keep it open.
- Package Included : 4 hydraulic gas struts with mounting hardware; enjoy our hassle-free 90-day warranty and friendly customer service
- See more on Amazon...
Brand: PEN | Manufacturer: PEN
Dimensions: 0.01 x 6.00 x 4.00 inches
Warranty: 90 days
See On Amazon #18
ABS RV 6-1/4" Metal Spring Loaded Cabinet Door Strut Prop (Pack of 4)
Asin: B078946NNB
Spring Loaded.
Pack Of 4 - Screws Not Included.
6 1/4" L X 1 1/2" W (Top Of Bracket).
Satin Nickel Color.
Features
- Used to prop open RV cabinet doors
- Satin nickel color
- Spring loaded
- 6 1/4 L x 1 1/2 W (top of bracket)
- Pack of 4 - Screws not included
- See more on Amazon...
Brand: ABS | Manufacturer: ABS
See On Amazon #19
JR Products BR-12553 10mm Angled Gas Spring Mounting Bracket
Asin: B000BRJQAC | Model: BR-12553 | PartNumber: BR-12553 | Ean: 0756815005180 | UPC: 756815005180
Two Mounting Brackets Per Package.
Constructed Of Durable 10 Mm Steel.
Brand: JR Products | Manufacturer: JR Products
Dimensions: 1.60 x 5.50 x 2.70 inches | Weight: 0.24 pounds
See On Amazon #20
Gas Strut 40N Gas Strut 6 Inch Gas Strut Cabinet 40N/8.8lb 6 Inch Gas Spring Gas Shocks Lift Supports Lid Stay,4Pcs
Asin: B0C8FYV95H | Model: Gas Struts 6 Inch | PartNumber: Gas Struts 6 Inch
Force:40N/8.8Lb (Per Strut);Load Bearing: 4-5Kg,Extendable Length: 0-51Mm,Total Length (Approx. ) : 190Mm/7.48".
Support Opens Lids To A Maximum Angle Of 90 Degrees,Convenient To Open And Close, Lift Cabinet Doors, Etc. Great For Supporting The Lid To Keep It Open..
Support Hinge Is Made Of High-Quality Stainless Steel And Nylon Materials, Solid Vacuum Hydraulic Core, Which Has Very High Pressure Resistance And Is Not Easy To Deform.Practical, Long Service Life..
Gas Strut Cabinet Hinge Safety Lift Support, Gas Struts Soft Open Lid Hinge 4Pcs And 20 X Screws.
Features
- Gas Strut Cabinet Hinge Safety Lift Support, Gas Struts Soft Open Lid Hinge for Cabinet Toy Box, 40N/8.8lb 6 inch Length
- Gas Strut Cabinet Hinge Safety Lift Support, Gas Struts Soft Open Lid Hinge 4Pcs and 20 x Screws
- Force:40N/8.8lb (Per Strut);Load Bearing: 4-5kg,Extendable length: 0-51mm,Total Length (Approx. ) : 190mm/7.48
- support hinge is made of high-quality stainless steel and nylon materials, solid vacuum hydraulic core, which has very high pressure resistance and is not easy to deform.practical, long service life.
- Support opens lids to a maximum angle of 90 degrees,Convenient to open and close, lift cabinet doors, etc. Great for supporting the lid to keep it open.
- See more on Amazon...
Brand: QLXHBOT | Manufacturer: QLXHBOT
Dimensions: 0.15 x 6.00 x 0.40 inches
See On Amazon
Looking For Something Else?
Search