Kegco BF STCK-NT Standard Tower Kegerator No Tank Beer Conversion Kit, Standard
Asin: B0036C2O76 | Model: BF STCK-NT | PartNumber: BF STCK-NT | Ean: 0797734447910 | UPC: 797734447910
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Single Faucet Draft Beer Tower: Featuring A Beautiful Standard-Plated Metal Finish And A Matching Standard-Plated Faucet With Metal Lever, This 3" Diameter Air-Cooled Kegco D4743t Draft Beer Tower Is The Same Stylish Tower Used On Most Commercial Grade Kegerators. This Tower Conveniently Includes 5 Feet Of Clear Beer Tubing Ending In A Nozzle And Hex Nut Assembly For Quick Connection To All Standard Keg Couplers, As Well As A Gasket And For Screws For Easy Mounting..
Includes Detailed Instructions: This Kegerator Conversion Kit Comes With Easy-To-Follow Directions And All Of The High-Quality Draft Dispense Components You'll Need To Quickly And Easily Convert Your Refrigerator Into A High-Performance Draft Beer Dispenser.
Standard Metal Beer Faucet Wrench: This Beer Faucet Spanner Wrench Is An Essential Tool That Allows You To Quickly And Confidently Loosen Or Tighten Shank Collars Without Scratching Your Faucets. This Wrench Has Been Built To Last With A Rugged All-Metal Construction And A Convenient 5-1/4" Length..
Lever Handle Keg Coupler: This Nsf-Approved Kegco Kt85d-L D System Keg Coupler Features A Sturdy Nickel-Plated Forged Brass Body With A Stainless Steel Probe, And Is Designed For Use With All Domestic Brand American D System Sankey Kegs. The Lever-Handle Design Is Easy To Use - Simply Pull Out And Then Down On The Handle To Couple The Keg. A 55-Psi Pressure Relief Valve Makes This Coupler Even More Convenient To Use, Allowing Over-Pressurized Gas To Escape Before It Enters Your Keg..
Features
- PRO SERIES DUAL GAUGE REGULATOR: Easily measure PSI and Co2 volume and adjust Co2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features. The top gauge indicates output pressure, while the side gauge tells you what's left in the Co2 tank, so you don't run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve.
- LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L D System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3 diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and for screws for easy mounting.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4 length.
- INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow directions and all of the high-quality draft dispense components you'll need to quickly and easily convert your refrigerator into a high-performance draft beer dispenser
- See more on Amazon...
Brand: Kegco | Manufacturer: Kegco
Dimensions: 10.00 x 18.00 x 10.00 inches | Weight: 10.00 pounds
Warranty: 1 Year
See On Amazon Similar To Kegco BF STCKNT Standard Tower
#1
FERRODAY Kegerator Tower Dual Faucet Beer Tower Double Tap Beer Tower Dispenser Beer Tap Kegerator Parts Stainless Steel Tower Brass Faucet Stainless Core Pre-assembled Lines 3" Keg Tower Beer Keg Tap
Asin: B0933C9KRL
[Safe & Strong Material & Shiny Surface]: High-Quality Material Long-Last Beer Tap Tower For Homebrew. Rustproof Stainless Steel Column, Safe For Beverage Beer Tubing, Solid Brass Faucet With Stainless Steel Core, Stainless Steel Screws, And Springs For Longer Service. The Surface Of The Beer Tower And Beer Faucet Are Both Fine Processed For Better Wear Resistance..
[Improved Self-Closing Springs & Keep Improving]: The Package Includes 2 Springs For Self-Closing Tap Installation. The Spring Is So Strong That You May Need A Hand For Installation. A Self-Closing Tap Is The End Of Drippings. Please Let Us Know If There Are Any Problems, We Will Try Our Best To Serve You (Lifetime Technical Support)..
[Few Minutes For Easy Installation Convenient Kit]: Pre-Assembled Faucet Shanks And Beer Lines To Save You Time. 1. Install This On A Bar Counter: Drill Holes On The Countertop For Tubing And Screws, Place The Gasket, Pass The Tubing Through The Hole, Use Screws To Fix The Tower, And Install The Faucet. 2. Install On A Kegerator Would Be Easier: Use The M5/M6 Screws To Fix The Tower Directly, No Drills Are Needed..
[Contents Everything You Need For A Beer Tower]: Comes With 1 Stainless Steel Column, 2 Brass Faucets, 2 Of 5 Feet 3/16" I.D. Tubing, 1 Beer Tower Gasket, 4 Sets Of M5 Screws And Nuts, 2 Clamps, 2 Beer Faucet Springs, 2 Beer Faucet Soothers, 1 Beer Tap Wrench, And 1 Cleaning Brush. A Complete Beer Dispenser Tower..
Features
- [Solid Construction Every Part for No Leak & No Loose]: Stainless Steel Draft Beer Tower with standard threads for faucet installation, further fix with faucet wrench, no leaks & no loose. Popular for indoor/ outdoor family gatherings or commercial applications like bars, hotels, restaurants, etc.
- [Contents Everything You Need For A Beer Tower]: Comes with 1 stainless steel column, 2 brass faucets, 2 of 5 feet 3/16 I.D. tubing, 1 beer tower gasket, 4 sets of M5 screws and nuts, 2 clamps, 2 beer faucet springs, 2 beer faucet soothers, 1 beer tap wrench, and 1 cleaning brush. A complete beer dispenser tower.
- [Safe & Strong Material & Shiny Surface]: High-quality material long-last beer tap tower for homebrew. Rustproof stainless steel column, safe for beverage beer tubing, solid brass faucet with stainless steel core, stainless steel screws, and springs for longer service. The surface of the beer tower and beer faucet are both fine processed for better wear resistance.
- [Few Minutes for Easy Installation Convenient Kit]: Pre-assembled faucet shanks and beer lines to save you time. 1. install this on a bar counter: drill holes on the countertop for tubing and screws, place the gasket, pass the tubing through the hole, use screws to fix the tower, and install the faucet. 2. Install on a kegerator would be easier: use the m5/m6 screws to fix the tower directly, no drills are needed.
- [Improved Self-closing Springs & Keep Improving]: The package includes 2 springs for self-closing tap installation. The spring is so strong that you may need a hand for installation. A self-closing tap is the end of drippings. Please let us know if there are any problems, we will try our best to serve you (Lifetime technical support).
- See more on Amazon...
Brand: Ferroday | Manufacturer: FERRODAY
See On Amazon #2
MRbrew Single Tap Draft Beer Tower, Support Countertop and Kegerator Installation, Stainless Core Beer Faucet Stainless Steel 3'' Flange Brewing Tower Dispenser Kit with Self-Closing Faucet Spring
Asin: B09N8T5F27
Beer Tap Wrench Prevents Leaking And Tap Brush Cover Keep Clean: Keg Faucet Tower Comes With Tightening Tools To Help Connection Fit Tightly. Use Faucet Wrench To Tighten Connection Bewteen Beer Faucet And Beer Tower And Connection Between The Inside Beer Shank And Tower, Beer Tower Top Cap Is Easy To Pry Open With Screwdriver, Use Hose Clamp To Tighten Beer Line Connection, No Leaks. Long Cleaning Brush Tap Plug Can Clean The Inside Of Faucet, Tap Dust Cover Keeps Dirty From Entering Faucet..
Beer Tower Insulation Foam Keeps Beer Fresh And Widely Used: There Is A Piece Of Insulation Foam Inside The Beer Tower, Which Will Reduce Influence Of External Environment High Temperature On Beverage, Beer Will Be In A Suitable Temperature, Taste Will Not Easy To Go Bad, Perfect For Dispensing Beer, Kombucha, Soda Water And Other Carbonated Drinks For Wedding, Graduation Party, Outdoor Picnic, Home Kegerator, Restaurant, Pub, Bar, A Perfect Piece For Any Brewers Equipment Home Or Commercial..
Healthy Stainless Structure And Partially Pre-Assembled: Kegerator Tower Features An All-Stainless Structure, Chrome-Plated Polished Brass Body Beer Tap Features A Stainless Core That Touches Beer Directly, Will Not Easy To Get Rust, The Dispensing Hose Is Made Of Healthy Plastic, No Ordors, Keep Original Beer Taste. Brewing Beer Tubing And Beer Tower Inside Beer Shank Connector Are Pre-Assmebled, Which Will Improve The Your Efficiency To Assemble And Install This Single Tap Beer Tower Kit..
Self-Closing Beer Faucet Spring Avoids Beer Waste: This Beer Tower Features A Thoughtful Stainless Self-Closing Tap Spring, Which Will Rebound Immediately And Close The Beer Faucet In Time If You Accidentally Touch The Tap Handle Causing The Faucet To Open, Which Will Reduce Beverage Waste Efficiently And Prevent The Brewing Mess. When You Install The Beer Tap Springs, The Narrow End Should Be Towards The Tap, The Wide End Should Be Towards Beer Tower To Get Correct Performance..
Features
- Support Kegerator and Countertop Installation: MRbrew single tap tower comes with necessary installation fittings letting it meet your 2 styles installation needs perfectly, just use installation screws to fix beer tower to kegerator top easily. need to drill holes if you want to install this beer tower to countertop, then attach little metal washers to installation screws, under beer tower, attach hex nuts to the screws to help fix installion, a great beer dispenser kit for your homebrew.
- Self-Closing Beer Faucet Spring Avoids Beer Waste: this beer tower features a thoughtful stainless self-closing tap spring, which will rebound immediately and close the beer faucet in time if you accidentally touch the tap handle causing the faucet to open, which will reduce beverage waste efficiently and prevent the brewing mess. when you install the beer tap springs, the narrow end should be towards the tap, the wide end should be towards beer tower to get correct performance.
- Beer Tap Wrench Prevents Leaking and Tap Brush Cover Keep Clean: keg faucet tower comes with tightening tools to help connection fit tightly. use faucet wrench to tighten connection bewteen beer faucet and beer tower and connection between the inside beer shank and tower, beer tower top cap is easy to pry open with screwdriver, use hose clamp to tighten beer line connection, no leaks. long cleaning brush tap plug can clean the inside of faucet, tap dust cover keeps dirty from entering faucet.
- Healthy Stainless Structure and Partially Pre-Assembled: kegerator tower features an all-stainless structure, chrome-plated polished brass body beer tap features a stainless core that touches beer directly, will not easy to get rust, the dispensing hose is made of healthy plastic, no ordors, keep original beer taste. brewing beer tubing and beer tower inside beer shank connector are pre-assmebled, which will improve the your efficiency to assemble and install this single tap beer tower kit.
- Beer Tower Insulation Foam Keeps Beer Fresh and Widely Used: there is a piece of insulation foam inside the beer tower, which will reduce influence of external environment high temperature on beverage, beer will be in a suitable temperature, taste will not easy to go bad, perfect for dispensing beer, kombucha, soda water and other carbonated drinks for wedding, graduation party, outdoor picnic, home kegerator, restaurant, pub, bar, a perfect piece for any brewers equipment home or commercial.
- See more on Amazon...
Brand: MRbrew
See On Amazon #3
BACOENG Double Faucet Tower Beer Kegerator Conversion Kit with Dual Gauge Regulator, No Tank Stainless Steel Keg Tower
Asin: B071WF5LRK | Ean: 0739770994775 | UPC: 739770994775
Single Faucet Draft Beer Tower: Featuring A Beautiful Standard-Plated Metal Finish And A Matching Standard-Plated Faucet With Metal Lever, This 3" Diameter Air-Cooled Kegco D4743t Draft Beer Tower Is The Same Stylish Tower Used On Most Commercial Grade Kegerators. This Tower Conveniently Includes 5 Feet Of Clear Beer Tubing Ending In A Nozzle And Hex Nut Assembly For Quick Connection To All Standard Keg Couplers, As Well As A Gasket And For Screws For Easy Mounting..
Includes Detailed Instructions: This Kegerator Conversion Kit Comes With Easy-To-Follow Directions And All Of The High-Quality Draft Dispense Components You'll Need To Quickly And Easily Convert Your Refrigerator Into A High-Performance Draft Beer Dispenser.
Standard Metal Beer Faucet Wrench: This Beer Faucet Spanner Wrench Is An Essential Tool That Allows You To Quickly And Confidently Loosen Or Tighten Shank Collars Without Scratching Your Faucets. This Wrench Has Been Built To Last With A Rugged All-Metal Construction And A Convenient 5-1/4" Length..
Lever Handle Keg Coupler: This Nsf-Approved Kegco Kt85d-L D System Keg Coupler Features A Sturdy Nickel-Plated Forged Brass Body With A Stainless Steel Probe, And Is Designed For Use With All Domestic Brand American D System Sankey Kegs. The Lever-Handle Design Is Easy To Use - Simply Pull Out And Then Down On The Handle To Couple The Keg. A 55-Psi Pressure Relief Valve Makes This Coupler Even More Convenient To Use, Allowing Over-Pressurized Gas To Escape Before It Enters Your Keg..
Features
- PRO SERIES DUAL GAUGE REGULATOR: Easily measure PSI and Co2 volume and adjust Co2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features. The top gauge indicates output pressure, while the side gauge tells you what's left in the Co2 tank, so you don't run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve.
- LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L D System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3 diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and for screws for easy mounting.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4 length.
- INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow directions and all of the high-quality draft dispense components you'll need to quickly and easily convert your refrigerator into a high-performance draft beer dispenser
- See more on Amazon...
Brand: BACOENG | Manufacturer: BACO ENGINEERING
See On Amazon #4
Hilangsan Single Beer Tap Tower Draft Beer Tower Kegerator Tower Stainless Steel Keg Tower Kegerator Parts Kegerator Kit Stainless Core Beer Faucet Pre-assembled Beer Line 3" Beer Tower Dispenser
Asin: B0CFTPXZRZ
[Upgraded Self-Closing Beer Tap Faucet] Our Kegerator Tap Kit Features A Stainless Steel Spring Placed Between The Beer Faucet And Faucet Shank. This Springs Enables The Beer Faucet To Automatically Close After Use, Preventing Accidental Spills And Beer Wastage. Enjoy A Mess-Free And Efficient Draft Beer Experience With This Innovative Feature. Elevate Your Draft Beer Pouring Experience With Our Beer Tap Tower..
[Complete Kegerator Replacement Parts Kit] This Single Faucet Kegerator Tower Kit Comes With Everything You Need For Installation, Including A 3” Stainless Column, 5Ft Beer Line, Beer Faucet, Tap Handle, Faucet Spring, M5 Screws And Nuts, M6 Screws And Nuts, Insulator Foam, Gasket, Faucet Wrench, Faucet Covers And Brushes, Our Worry-Free Lifetime Technical Support, And Friendly Customer Service..
[Insulating Foam & Pour Your Cool Beer] 8Mm Insulating Foam Is Built Into The Cap And Walls Of The Kegerator Tower. Excellent Thermal Insulation Ensures That Every Beer You Pour Stays Fresh And Cool. This Kegerator Kit Comes With Faucet Caps And Plug Brushes For Keeping Your Faucet Clean Effectively, Further Ensuring The Fresh Taste Of Beer..
[Pre-Installed Beer Line For Easy Installation] 5Ft 3/16"Id Beer Line Tubing And Beer Faucet Shank Are Pre-Installed In The Beer Tap Tower To Save You Time. Only A Few Minutes To Install The Kegerator Replacement Parts Into The Kegerator Or Countertop. The Attached Beer Faucet Wrench Can Be Used To Tighten The Beer Faucets And Beer Shanks During Installation, Ensuring Tight Connections And Leak-Free. It Also Is Very Easy To Disassemble Kegerator Tap For Deep Cleaning With The Tap Wrench..
Features
- [Shiny Stainless Steel Kegerator Tower] Our 3" column of keg tower is constructed from rustproof SS 304 with a polished finish. The kegerator parts feature standard brass chrome beer faucets with stainless steel core, providing both health benefits and wear resistance. The beer tap tower s high-quality material, solid construction, and stylish design guarantee years of reliable service. Hilangsan single tap tower is the ideal kegerator kit for replacing an old kegerator tower or creating a new draft beer dispenser.
- [Pre-installed Beer Line for Easy Installation] 5ft 3/16ID beer line tubing and beer faucet shank are pre-installed in the beer tap tower to save you time. Only a few minutes to install the kegerator replacement parts into the kegerator or countertop. The attached beer faucet wrench can be used to tighten the beer faucets and beer shanks during installation, ensuring tight connections and leak-free. It also is very easy to disassemble kegerator tap for deep cleaning with the tap wrench.
- [Upgraded Self-closing Beer Tap Faucet] Our kegerator tap kit features a stainless steel spring placed between the beer faucet and faucet shank. This springs enables the beer faucet to automatically close after use, preventing accidental spills and beer wastage. Enjoy a mess-free and efficient draft beer experience with this innovative feature. Elevate your draft beer pouring experience with our beer tap tower.
- [Insulating Foam & Pour Your Cool Beer] 8mm Insulating foam is built into the cap and walls of the kegerator tower. Excellent thermal insulation ensures that every beer you pour stays fresh and cool. This kegerator kit comes with faucet caps and plug brushes for keeping your faucet clean effectively, further ensuring the fresh taste of beer.
- [Complete Kegerator Replacement Parts Kit] This single faucet kegerator tower kit comes with everything you need for installation, including a 3 Stainless Column, 5ft beer line, beer faucet, tap handle, faucet spring, M5 Screws and nuts, M6 Screws and nuts, insulator foam, gasket, faucet wrench, faucet covers and brushes, our worry-free lifetime technical support, and friendly customer service.
- See more on Amazon...
Brand: Hilangsan
See On Amazon #5
TMCRAFT Kegerator Tower Kit, Single Tap Beer Conversion Kit, Stainless Steel Beer Tower with Dual Gauge CGA-320 Regulator & D-System Keg Coupler for Bars, Pubs, and Restaurants
Asin: B0BZYPKWGS | Ean: 0781044463210 | UPC: 781044463210
D System Keg Coupler: This D System Keg Coupler Features A Chrome-Plated Brass Body And Stainless Steel Probe And It Is Compatible With Most American D System Sankey Kegs. The Lever Handle Is Designed To Be Easy To Use And Makes It More Stable And Reliable Than Standard Keg Couplers..
One-Year Warranty: Message Us 24/7 Via Amazon For Full Support And Service If You Are Not Fully Satisfied With Our Beer Tower Kit Or If It Does Not Perform To Your Expectations..
Beer Drip Trays: The Kegerator Tower Kit Is Equipped With A Beer Drip Tray To Collect Excess Beverages And Unexpected Beer Drip. Made Of Heavy-Duty Food-Grade 304 Stainless Steel With A Polished Finish And Equipped With Removable Covers For Convenient Cleaning..
Dual Gauge Regulator: Tmcraft Upgrade Regulator Is Equipped With Dual Pressure Gauges, The Top Pressure Gauge Indicates The Output Pressure, And The Side Pressure Gauge Displays The Remaining Amount In The Tank, And It Is Easy To Adjust And Stabilize The Pressure By Rotating The Adjustment Knob..
Features
- Single Faucet Beer Tower: TMCRAFT beer tower is constructed of premium 304 stainless steel for strong durability and high reliability, which can be used on most commercial and home kegerators. This tower conveniently includes 5 feet beer tubing, ending in a nozzle and 5/8 threaded nut assembly for quick connection to all standard keg couplers.
- Dual Gauge Regulator: TMCRAFT upgrade regulator is equipped with dual pressure gauges, the top pressure gauge indicates the output pressure, and the side pressure gauge displays the remaining amount in the tank, and it is easy to adjust and stabilize the pressure by rotating the adjustment knob.
- D System Keg Coupler: This D system keg coupler features a chrome-plated brass body and stainless steel probe and it is compatible with most American D system Sankey kegs. The lever handle is designed to be easy to use and makes it more stable and reliable than standard keg couplers.
- Beer Drip Trays: The kegerator tower kit is equipped with a Beer Drip Tray to collect excess beverages and unexpected beer drip. Made of heavy-duty food-grade 304 stainless steel with a polished finish and equipped with removable covers for convenient cleaning.
- One-Year Warranty: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our beer tower kit or if it does not perform to your expectations.
- See more on Amazon...
Brand: TMCRAFT
Dimensions: 4.50 x 11.80 x 4.50 inches
See On Amazon #6
TMCRAFT Kegerator Tower Kit, Double Tap Beer Conversion Kit, Stainless Steel Beer Tower with Dual Gauge CGA-320 Regulator & D-System Keg Coupler for Bars, Pubs, and Restaurants
Asin: B0BZYJQQJX | Ean: 0781044463227 | UPC: 781044463227
D System Keg Coupler: This D System Keg Coupler Features A Chrome-Plated Brass Body And Stainless Steel Probe And It Is Compatible With Most American D System Sankey Kegs. The Lever Handle Is Designed To Be Easy To Use And Makes It More Stable And Reliable Than Standard Keg Couplers..
One-Year Warranty: Message Us 24/7 Via Amazon For Full Support And Service If You Are Not Fully Satisfied With Our Beer Tower Kit Or If It Does Not Perform To Your Expectations..
Beer Drip Trays: The Kegerator Tower Kit Is Equipped With A Beer Drip Tray To Collect Excess Beverages And Unexpected Beer Drip. Made Of Heavy-Duty Food-Grade 304 Stainless Steel With A Polished Finish And Equipped With Removable Covers For Convenient Cleaning..
Dual Gauge Regulator: Tmcraft Upgrade Regulator Is Equipped With Dual Pressure Gauges, The Top Pressure Gauge Indicates The Output Pressure, And The Side Pressure Gauge Displays The Remaining Amount In The Tank, And It Is Easy To Adjust And Stabilize The Pressure By Rotating The Adjustment Knob..
Features
- Double Faucet Beer Tower: TMCRAFT beer tower is constructed of premium 304 stainless steel for strong durability and high reliability, which can be used on most commercial and home kegerators. This tower conveniently includes 5 feet beer tubing, ending in a nozzle and 5/8 threaded nut assembly for quick connection to all standard keg couplers.
- Dual Gauge Regulator: TMCRAFT upgrade regulator is equipped with dual pressure gauges, the top pressure gauge indicates the output pressure, and the side pressure gauge displays the remaining amount in the tank, and it is easy to adjust and stabilize the pressure by rotating the adjustment knob.
- D System Keg Coupler: This D system keg coupler features a chrome-plated brass body and stainless steel probe and it is compatible with most American D system Sankey kegs. The lever handle is designed to be easy to use and makes it more stable and reliable than standard keg couplers.
- Beer Drip Trays: The kegerator tower kit is equipped with a Beer Drip Tray to collect excess beverages and unexpected beer drip. Made of heavy-duty food-grade 304 stainless steel with a polished finish and equipped with removable covers for convenient cleaning.
- One-Year Warranty: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our beer tower kit or if it does not perform to your expectations.
- See more on Amazon...
Brand: TMCRAFT
Dimensions: 4.50 x 11.80 x 4.50 inches
See On Amazon #7
MRbrew Triple Tap Draft Beer Tower Dispenser Kegerator Dual Faucet Beer Tower, Support Countertop and Kegerator Installation, Stainless Steel 3'' Brewing Tower Beer Faucet Dispenser Kit for Homebrew
Asin: B0CFGMPC71
Beer Tap Wrench Prevents Leaking And Tap Brush Cover Keep Clean: Keg Faucet Tower Comes With Tightening Tools To Help Connection Fit Tightly. Use Faucet Wrench To Tighten Connection Bewteen Beer Faucet And Beer Tower And Connection Between The Inside Beer Shank And Tower, Beer Tower Top Cap Is Easy To Pry Open With Screwdriver, Use Hose Clamp To Tighten Beer Line Connection, No Leaks. Long Cleaning Brush Tap Plug Can Clean The Inside Of Faucet, Tap Dust Cover Keeps Dirty From Entering Faucet..
Beer Tower Insulation Foam Keeps Beer Fresh And Widely Used: There Is A Piece Of Insulation Foam Inside The Beer Tower, Which Will Reduce Influence Of External Environment High Temperature On Beverage, Beer Will Be In A Suitable Temperature, Taste Will Not Easy To Go Bad, Perfect For Dispensing Beer, Kombucha, Soda Water And Other Carbonated Drinks For Wedding, Graduation Party, Outdoor Picnic, Home Kegerator, Restaurant, Pub, Bar, A Perfect Piece For Any Brewers Equipment Home Or Commercial..
Healthy Stainless Structure And Partially Pre-Assembled: Kegerator Tower Features An All-Stainless Structure, Chrome-Plated Polished Brass Body Beer Tap Features A Stainless Core That Touches Beer Directly, Will Not Easy To Get Rust, The Dispensing Hose Is Made Of Healthy Plastic, No Ordors, Keep Original Beer Taste. Brewing Beer Tubing And Beer Tower Inside Beer Shank Connector Are Pre-Assmebled, Which Will Improve The Your Efficiency To Assemble And Install This Single Tap Beer Tower Kit..
Self-Closing Beer Faucet Spring Avoids Beer Waste: This Beer Tower Features A Thoughtful Stainless Self-Closing Tap Spring, Which Will Rebound Immediately And Close The Beer Faucet In Time If You Accidentally Touch The Tap Handle Causing The Faucet To Open, Which Will Reduce Beverage Waste Efficiently And Prevent The Brewing Mess. When You Install The Beer Tap Springs, The Narrow End Should Be Towards The Tap, The Wide End Should Be Towards Beer Tower To Get Correct Performance..
Features
- Support Kegerator and Countertop Installation: MRbrew triple tap tower comes with necessary installation fittings letting it meet your 2 styles installation needs perfectly, just use installation screws to fix beer tower to kegerator top easily. need to drill holes if you want to install this beer tower to countertop, then attach little metal washers to installation screws, under beer tower, attach hex nuts to the screws to help fix installion, a great beer dispenser kit for your homebrew.
- Self-Closing Beer Faucet Spring Avoids Beer Waste: this beer tower features a thoughtful stainless self-closing tap spring, which will rebound immediately and close the beer faucet in time if you accidentally touch the tap handle causing the faucet to open, which will reduce beverage waste efficiently and prevent the brewing mess. when you install the beer tap springs, the narrow end should be towards the tap, the wide end should be towards beer tower to get correct performance.
- Beer Tap Wrench Prevents Leaking and Tap Brush Cover Keep Clean: keg faucet tower comes with tightening tools to help connection fit tightly. use faucet wrench to tighten connection bewteen beer faucet and beer tower and connection between the inside beer shank and tower, beer tower top cap is easy to pry open with screwdriver, use hose clamp to tighten beer line connection, no leaks. long cleaning brush tap plug can clean the inside of faucet, tap dust cover keeps dirty from entering faucet.
- Healthy Stainless Structure and Partially Pre-Assembled: kegerator tower features an all-stainless structure, chrome-plated polished brass body beer tap features a stainless core that touches beer directly, will not easy to get rust, the dispensing hose is made of healthy plastic, no ordors, keep original beer taste. brewing beer tubing and beer tower inside beer shank connector are pre-assmebled, which will improve the your efficiency to assemble and install this single tap beer tower kit.
- Beer Tower Insulation Foam Keeps Beer Fresh and Widely Used: there is a piece of insulation foam inside the beer tower, which will reduce influence of external environment high temperature on beverage, beer will be in a suitable temperature, taste will not easy to go bad, perfect for dispensing beer, kombucha, soda water and other carbonated drinks for wedding, graduation party, outdoor picnic, home kegerator, restaurant, pub, bar, a perfect piece for any brewers equipment home or commercial.
- See more on Amazon...
Brand: MRbrew
See On Amazon #8
Hgkeke Dual Beer Tower Dispenser - Double Tap Kegerator Tower Draft Beer Tower Dispenser Pre-installed 5ft Beer Line Stainless Steel Core Faucet Double Keg Tap Beer Tower for 3" Kegerator Tower
Asin: B0B6DQN848 | Model: HG-001 | PartNumber: HG-001
Spring-Loaded Dual Beer Tap, No Drip: Dual Beer Tower Owns A Spring Return System, A Couple Of Springs To Hold The Handle To The Closed Position Moderately, No Beer Leaks When It's Under Co2 Pressure. Heavy Construction Stainless Steel Core Beer Faucet Reduces Excessive Foaming When Close The Spigot And Has A Nice Smooth Pour, Save Beer Flavor. Two Pieces Of Rubber Tap Covers Keep Flies Away From The Tap And Avoid Beer Dries In The Tap To Cause The Piston To Stick To The Beer Tap Surface..
What You Will Get: Double Beer Faucets, More Beverage Choices, Twice Happiness, Quicker Beverage Pouring, Enjoy Every Moment With Your Friends And Family. Package Includes: 1 * Stainless Steel Column, 2 * Faucets, 2 * 5Ft 3/16" I.D. Tubing (Pre-), 1 * Gasket, 4 * M5 Screws, 2 * Hose Clamps, 2 * Red Handy Hose Clamps, 2 * Beer Faucet Springs, 2 * Beer Faucet Covers, 2 * Tap Handles, 4 * Washers & Nuts, 1 * Beer Tap Wrench, 1 * Cleaning Brush. Any Queations, Please Feel Free To Seek For Help..
Easy Installation & Free Your Hands: Dual Faucet Draft Beer Tower Pre-Installed 2 Pieces Of 3/16’’ Id Food-Grade Clear Pvc Tubing Suitable For 1/4'' And 5/16’’ Tailpiece D Coupler Perfectly, Out Of The Box, Directly Use. Two Pieces Of 6-12Mm Adjustable Hose Clamps For Beer Line Connection Fasten, No Beer Leakage Of Oxygen Gets Into Your Beer Line To Damage Beer Flavor. 4*M5 Screws In The Pack, No Need To Buy Extra Screws For Mounting The Dual Faucet Beer Tower Into 3’’ Homebrew Kegerator Tower.
Pop Off Cap & Easy Maintenance: The Removable Top Lid Easily Pops Off On The Top Of The Dual Faucet Beer Tower By A Flat Head Screwdriver. Easy Assemble And Disassemble Double Beer Tower Faucet, 5Ft Beer Tubing, And Tower Cover Makes Beer Faucet Cleaning Easy And Line-Changes Regularly. A Wrench Comes In The Dual Keg Tap Beer Tower Kit For Fastening/Loosening The Beer Tower Collar And The Beer Nut Makes Cleaning Like A Piece Of Cake..
Features
- 304 SS Dual Beer Tower, Freezing Cold with Every Pour: Mirror finish stainless steel dual faucet beer tower body, anti-wear, serve for a lifetime, stainless steel core beer faucet, easy operation, and no sticky. The tap and the beer faucet complement each other great look spectacular. An 8mm foam sheet lie inside of the tower serve as an insulator against the dual tap tower outside temperature and guarantee each pour from the tap is freezing cold.
- Pop Off Cap & Easy Maintenance: The removable top lid easily pops off on the top of the dual faucet beer tower by a flat head screwdriver. Easy assemble and disassemble double beer tower faucet, 5ft beer tubing, and tower cover makes beer faucet cleaning easy and line-changes regularly. A wrench comes in the dual keg tap beer tower kit for fastening/loosening the beer tower collar and the beer nut makes cleaning like a piece of cake.
- Spring-loaded Dual Beer Tap, No Drip: Dual beer tower owns a spring return system, a couple of springs to hold the handle to the closed position moderately, no beer leaks when it's under CO2 pressure. Heavy construction stainless steel core beer faucet reduces excessive foaming when close the spigot and has a nice smooth pour, save beer flavor. Two pieces of rubber tap covers keep flies away from the tap and avoid beer dries in the tap to cause the piston to stick to the beer tap surface.
- Easy Installation & Free Your Hands: Dual faucet draft beer tower pre-installed 2 pieces of 3/16 ID food-grade clear PVC tubing suitable for 1/4'' and 5/16 tailpiece D coupler perfectly, out of the box, directly use. Two pieces of 6-12mm adjustable hose clamps for beer line connection fasten, no beer leakage of oxygen gets into your beer line to damage beer flavor. 4*M5 screws in the pack, no need to buy extra screws for mounting the dual faucet beer tower into 3 homebrew Kegerator tower
- What You Will Get: Double beer faucets, more beverage choices, twice happiness, quicker beverage pouring, enjoy every moment with your friends and family. Package includes: 1 * stainless steel column, 2 * faucets, 2 * 5ft 3/16 I.D. tubing (pre-), 1 * gasket, 4 * M5 screws, 2 * hose clamps, 2 * red handy hose clamps, 2 * beer faucet springs, 2 * beer faucet covers, 2 * tap handles, 4 * washers & nuts, 1 * beer tap wrench, 1 * cleaning brush. Any queations, please feel free to seek for help.
- See more on Amazon...
Brand: Hgkeke
See On Amazon #9
Kegerator Tower Dual Tap Beer Tower Dispenser Kegerator Parts 3 Inches Stainless Steel Beer Tower Includes Pre-Assembled Hose and Self-Closing Faucet
Asin: B0CT354NF7 | Model: X-DBTW | PartNumber: X-DBTW
【Easy To Assemble】The Dual Beer Dispensers Are Pre-Installed With 2 Beer Faucet Shanks And A Beer Hose, Remove The Top Cover Of The Beer Tower, Put In Insulation Cotton, Drill Holes On The Kegerator Top Or Counter Top, Insert The Hose Into The Hole，Fix The Beer Tower With Screws, Washers, And Hex Nuts, Connect The Beer Pipe And Beer Barrel, Place Stainless Steel Springs On The Beer Tower And Install The Faucet,Tighten With A Wrench, And Cover The Tower Cover..
【Widely Used】The Kegerator Tower Kit Can Be Used In Most Occasions, Such As Home Brewing, Hosting Events, Off Site Dining, Office Gatherings, Bar Decoration, Etc., To Meet The Needs Of Beer Enthusiasts And Relevant Professionals In Commercial Venues. The Kegerator Beer Tower Not Only Has A Wide Range Of Applications, But Also Provides Convenience And Fun For Different Groups Of People, Allowing You To Enjoy Carbonated Drinks Such As A Glass Of Cold Beer, Kombucha, And Soda Anytime And Anywhere..
【Beer Tower That Can Be Automatically Closed】Our Beer Tap Tower Has A Stainless Steel Spring Placed Between The Beer Faucet And The Faucet Handle. It Can Automatically Rebound And Close The Kegerator Tap After Use, Effectively Preventing Accidental Beer Leakage And Waste. The Advanced Beer Tower Design Greatly Enhances Your Draft Beer Pouring Experience..
【Full Regulator Kit Includede】The Kegerator Tower Dual Faucet Beer Comes With A Complete Set, Including 1 X Stainless Steel Column, 2 X Brass Faucet, 1 X 5-Foot 3/16 Inch Inner Diameter Hose, 1 X Insulation Cotton,1 X Beer Tower Gasket, 4 X M5 And 4 X M6 Screws, 4 X Hex Nuts, 2 X Single Ear Clamp, 2 X Stainless Steel Clamp, 2 X Beer Faucet Spring, 1 X Beer Faucet Wrench, 2 X Faucet Cap, And 1 X Cleaning Brush..
Features
- Enduring Kegerator Tower Our dual beer tower are made of stainless steel material, which is not only not easy to rust, but also easy to clean after use, making it more sturdy and enduring than plastic material. The selection of stainless steel materials not only makes the product more beautiful, enduring, and corrosion-resistant, but also can withstand the test of time, bringing you a long-lasting and reliable user experience.
- Full Regulator Kit Includede The kegerator tower dual faucet beer comes with a complete set, including 1 x stainless steel column, 2 x brass faucet, 1 x 5-foot 3/16 inch inner diameter hose, 1 x insulation cotton,1 x beer tower gasket, 4 x M5 and 4 x M6 screws, 4 x hex nuts, 2 x single ear clamp, 2 x stainless steel clamp, 2 x beer faucet spring, 1 x beer faucet wrench, 2 x faucet cap, and 1 x cleaning brush.
- Easy to Assemble The dual beer dispensers are pre-installed with 2 beer faucet shanks and a beer hose, remove the top cover of the beer tower, put in insulation cotton, drill holes on the kegerator top or counter top, insert the hose into the hole fix the beer tower with screws, washers, and hex nuts, connect the beer pipe and beer barrel, place stainless steel springs on the beer tower and install the faucet,tighten with a wrench, and cover the tower cover.
- Beer Tower That Can Be Automatically Closed Our beer tap tower has a stainless steel spring placed between the beer faucet and the faucet handle. It can automatically rebound and close the kegerator tap after use, effectively preventing accidental beer leakage and waste. The advanced beer tower design greatly enhances your draft beer pouring experience.
- Widely Used The kegerator tower kit can be used in most occasions, such as home brewing, hosting events, off site dining, office gatherings, bar decoration, etc., to meet the needs of beer enthusiasts and relevant professionals in commercial venues. The kegerator beer tower not only has a wide range of applications, but also provides convenience and fun for different groups of people, allowing you to enjoy carbonated drinks such as a glass of cold beer, kombucha, and soda anytime and anywhere.
- See more on Amazon...
Brand: Imaictuu | Manufacturer: Imaictuu
See On Amazon #10
Draft Beer Tower Faucet Dispenser - LUCKEG Brand Double Beer Tap, Stainless Steel 3" Diameter Beer Tower, Beer Line and Beer Tower assemble accessory for Home Brewing
Asin: B07NZZRZPT | Ean: 0653846707413 | UPC: 653846707413
3.Assemble: Include Multi-Purpose Keg Faucet Wrench, Tower Gasket, Mounting Hardware Bolts, Very Easy To Assemble ;.
5.Guarantee: Quality Guarantee, Any Problem For The Beer Tower, Money Back Or Replacement Free..
4.Chrome Plated Brass Faucets With Straight Shaft And Polished Interior, Standard To The Commercial Beer Industry;.
2.Material: 3" Diameter Beer Tower, Made Of Chrome Plated Steel For Long Life, Chrome Plated Beer Faucet;.
Features
- 1.Packing: Double Tap Draft Beer Tower, 2 PCS Beer Faucet, 5ft 3/16 ID Hose Drink Tubes, Assemble Accessories ;
- 2.Material: 3 Diameter Beer Tower, made of Chrome plated steel for Long Life, Chrome plated beer faucet;
- 3.Assemble: Include Multi-purpose Keg Faucet Wrench, Tower Gasket, Mounting Hardware Bolts, Very easy to assemble ;
- 4.Chrome Plated Brass Faucets with Straight Shaft and Polished Interior, Standard to the Commercial Beer Industry;
- 5.Guarantee: Quality Guarantee, any problem for the Beer Tower, Money Back or Replacement free.
- See more on Amazon...
Brand: LUCKEG
See On Amazon #11
Four Tap Beer Dispenser Tower Chrome Draft Beer Kegerator Tower 3" Diameter Stainless Steel Beer Tower with 4 Faucets, Beer Line and Beer Tower assemble accessory for Beer Keg Kegging System by LUCKEG
Asin: B0928G3P34 | Ean: 0631344707982 | UPC: 631344707982
3.The 4 Faucet Beer Tower Is Well-Built And Attractive, Can Be Widely Used At Home Or Commercial Bar Setup;.
5.Guarantee: Quality Guarantee, Any Problem For 4 Tap Beer Tower, Money Back Or Replacement Free..
4.This Draft Beer Tower Will Fit On Any Standard Kegerator Or Replace A 3" Diameter Tower And Will Make A Great Addition To Your Home Brewing Collection;.
2.Material: The Beer Tower Body Is Made Of Grade 304 Stainless Steel And The Tower Faucet Is Chormed Brass;.
Features
- 1.Include: 3" Diameter Stainless Steel Beer Tower Body, 4 Beer Faucets with 4 pcs 3/16 inch Beer Tubing and Other Beer Tower Assemble Accessories;
- 2.Material: The Beer Tower Body is made of Grade 304 Stainless Steel and the Tower Faucet is Chormed Brass;
- 3.The 4 Faucet Beer Tower is Well-built and Attractive, can be widely used at Home or commercial Bar Setup;
- 4.This Draft Beer Tower will fit on any Standard Kegerator or replace a 3 Diameter Tower and will make a great addition to your Home Brewing Collection;
- 5.Guarantee: Quality Guarantee, any problem for 4 Tap Beer Tower, Money Back or Replacement Free.
- See more on Amazon...
Brand: LUCKEG
Dimensions: 17.30 x 4.50 x 5.00 Inches
See On Amazon #12
Single Tap Stainless Steel Beer Tower - LUCKEG Brand 3 inch Draft Beer Tap Tower with Single Beer Faucet for Home Brewing
Asin: B082X2X22Z | Ean: 0653854601253 | UPC: 653854601253
3.The Single Faucet Beer Tower Is Well-Built And Attractive, Can Be Widely Used At Home Or Commercial Bar Setup;.
5.Guarantee: Quality Guarantee, Any Problem For Single Tap Beer Tower, Money Back Or Replacement Free..
4.This Draft Beer Tower Will Fit On Any Standard Kegerator Or Replace A 3" Diameter Tower And Will Make A Great Addition To Your Home Brewing Collection;.
2.The Beer Tower Body Is Made Of Grade 304 Stainless Steel And The Tower Faucet Is Chormed Brass;.
Features
- 1.Stainless Steel Draft Beer Tower, Include 1 PCS Beer Faucet, 3/16 ID Hose Drink Tubes, Other Assemble Accessories;
- 2.The Beer Tower Body is made of Grade 304 Stainless Steel and the Tower Faucet is Chormed Brass;
- 3.The Single Faucet Beer Tower is Well-built and Attractive, can be widely used at Home or commercial Bar Setup;
- 4.This Draft Beer Tower Will fit on any Standard Kegerator or replace a 3 Diameter Tower and will make a great addition to your Home Brewing Collection;
- 5.Guarantee: Quality Guarantee, any problem for Single Tap Beer Tower, Money Back or Replacement free.
- See more on Amazon...
Brand: LUCKEG
Dimensions: 50.00 x 100.00 x 100.00 Centimeters
See On Amazon #13
Kegco KC D4743DT-SS Draft Beer Kegerator Tower, 3 inches, Stainless Steel
Asin: B0048CDUBC | Model: KC D4743DT-SS | PartNumber: KC D4743DT-SS | Ean: 0608938445285, 0610074823438 | UPC: 610074823438, 608938445285
Nsf-Approved Double Faucet Draft Tower Is Compatible With All Standard Keg Couplers.
Includes Two 5' Of 3/16" Clear Beer Tubing With Nozzle And Hex Nut Assemblies.
Can Be Easily Mounted Using The Gasket And Four Screws That Are Included.
Features Two Chrome Plated Kegco Faucets With Brass Levers And Faucet Knobs.
Features
- Stylish 3" diameter air-cooled polished stainless steel Kegco draft beer tower
- Features two chrome plated Kegco faucets with brass levers and faucet knobs
- NSF-approved double faucet draft tower is compatible with all standard keg couplers
- Can be easily mounted using the gasket and four screws that are included
- Includes two 5' of 3/16 clear beer tubing with nozzle and hex nut assemblies
- See more on Amazon...
Brand: Kegco | Manufacturer: Kegco
Dimensions: 6.25 x 14.00 x 5.25 inches | Weight: 4.55 Pounds
See On Amazon #14
Kegco BF STCK-5T Standard Tower Kegerator Conversion Kit with 5 lb Co2 Tank, Standard
Asin: B0036BYSR6 | Model: BF STCK-5T | PartNumber: BF STCK-5T | Ean: 0797734447903 | UPC: 797734447903
Single Faucet Draft Beer Tower: Featuring A Beautiful Standard-Plated Metal Finish And A Matching Standard-Plated Faucet With Metal Lever, This 3" Diameter Air-Cooled Draft Beer Tower Is The Same Stylish Tower Used On Most Commercial Grade Kegerators. This Tower Conveniently Includes 5 Feet Of Clear Beer Tubing Ending In A Nozzle And Hex Nut Assembly For Quick Connection To All Standard Keg Couplers, As Well As A Gasket And Four Screws For Easy Mounting..
Includes Empty 5 Lb. Aluminum Co2 Tank: All Of Our Brand New Tanks Are Made From High Strength Aluminum Alloy Which Is Not As Heavy As A Steel Tank And Will Not Rust. These Eye-Catching Tanks Have A Glossy Red Coating That Acts As An Extra Layer Of Protection Against Corrosion And Wear..
Standard Metal Beer Faucet Wrench: This Beer Faucet Spanner Wrench Is An Essential Tool That Allows You To Quickly And Confidently Loosen Or Tighten Shank Collars Without Scratching Your Faucets. This Wrench Has Been Built To Last With A Rugged All-Metal Construction And A Convenient 5-1/4" Length..
Lever Handle Keg Coupler: This Nsf-Approved Kegco Kt85d-L "D" System Keg Coupler Features A Sturdy Nickel-Plated Forged Brass Body With A Stainless Steel Probe, And Is Designed For Use With All Domestic Brand American D System Sankey Kegs. The Lever-Handle Design Is Easy To Use; Simply Pull Out And Then Down On The Handle To Couple The Keg. A 55-Psi Pressure Relief Valve Makes This Coupler Even More Convenient To Use, Allowing Over-Pressurized Gas To Escape Before It Enters Your Keg..
Features
- PRO SERIES DUAL GAUGE REGULATOR: Easily measure PSI and CO2 volume and adjust CO2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features. The top gauge indicates output pressure, while the side gauge tells you what's left in the CO2 tank, so you don't run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve.
- LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L D System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use; simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3 diameter air-cooled draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and four screws for easy mounting.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4 length.
- INCLUDES EMPTY 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear.
- See more on Amazon...
Brand: Kegco | Manufacturer: Kegco
Dimensions: 12.00 x 20.00 x 10.00 Inches
Warranty: 1 Year
See On Amazon #15
Kegco D4743T-ASC 100% All Stainless Steel Contact Keg Beer Tower Single Faucet
Asin: B00BREIFTQ | Model: D4743T-ASC | PartNumber: D4743T-ASC | Ean: 0608819315041 | UPC: 608819315041
The 100% Stainless Steel Contact Allows The Beer That Comes Into Contact With Metal Components To Only Touch Durable, Sanitary Stainless Steel.
This Kegco Tower Can Be Easily Mounted Using The Included Gasket And Screws.
Draft Beer Tower Comes Equipped With A Stainless Steel Faucet And Lever, A Sleek Black Faucet Knob, And 5 Feet Of 3/16" I.D. Beer Line Hose Assemblies With Coupling Nut And Washer.
This Tower Is Constructed Of Stainless Steel And Comes Equipped With Stainless Steel Metal Components For 100% Stainless Steel Contact And Better Tasting Beer.
Features
- The Kegco D4743T-ASC Single Faucet Draft Beer Tower has a 3" diameter column and measures 12" tall
- This tower is constructed of stainless steel and comes equipped with stainless steel metal components for 100% stainless steel contact and better tasting beer
- The 100% stainless steel contact allows the beer that comes into contact with metal components to only touch durable, sanitary stainless steel
- Draft beer tower comes equipped with a stainless steel faucet and lever, a sleek black faucet knob, and 5 feet of 3/16 I.D. beer line hose assemblies with coupling nut and washer
- This Kegco tower can be easily mounted using the included gasket and screws
- See more on Amazon...
First Available: 04/10/2018
Brand: Kegco | Manufacturer: Kegco
See On Amazon #16
"Kegco D4743DT-ASC 2-Faucet Draft Beer Kegerator Tower 3"" Column- 100% SS Contact", Stainless Steel
Asin: B005GR1826 | Model: D4743DT-ASC | PartNumber: D4743DT-ASC | Ean: 0608729690900 | UPC: 608729690900
2) Stainless Faucets With Stainless Levers.
Dimensions: 3" Diameter X 14-3/8" H.
2) 5 Feet Of 3/16 Inch.
3 Inch.
Features
- 100 percent stainless steel contact uses stainless metal components for better tasting beer
- 3 inch
- 2) stainless faucets with stainless levers
- 2) 5 feet of 3/16 inch
- Dimensions: 3 diameter x 14-3/8 h
- See more on Amazon...
First Available: 04/10/2018
Brand: Kegco | Manufacturer: Kegco
Dimensions: 50.00 x 100.00 x 100.00 Centimeters
See On Amazon #17
Kegco DT145-2P-ASC Tower, Polished Stainless Steel
Asin: B01LDO1K8C | Model: DT145-2P-ASC | PartNumber: DT145-2P-ASC | Ean: 0700697202892 | UPC: 700697202892
The 14" Tall Column Gives You An Extra 2" Of Height Over Other Towers.
This Draft Beer Tower Is Compatible With All Standard Keg Couplers.
With The Extra Height Of This Tower You Can Easily Fill Your Growler Or Pint Glasses.
It Is 3" In Diameter, Giving You The Best Air Circulation To Help Maintain Draft Beer Temperature.
Features
- This Kegco DT145-2P-ASC 14" tall, 3" diameter 100% stainless steel contact draft beer tower comes with two matching stainless faucets
- It is 3 in diameter, giving you the best air circulation to help maintain draft beer temperature
- The 14 tall column gives you an extra 2 of height over other towers
- With the extra height of this tower you can easily fill your growler or pint glasses
- This draft beer tower is compatible with all standard keg couplers
- See more on Amazon...
Brand: Kegco | Manufacturer: Kegco
Dimensions: 14.50 x 3.00 x 3.00 inches | Weight: 4.50 pounds
See On Amazon #18
Kegco EBUTCK-BLCP-NT Ultimate Tower Kegerator Home Brew Kit Ball Lock No Tank
Asin: B004WMK27I | Model: EBUTCK-BLCP-NT | PartNumber: EBUTCK-BLCP-NT | Ean: 0608866316954 | UPC: 608866316954
This Nsf Approved 3-1/2 Diameter Air-Cooled Stainless Steel Draft Beer Tower.
Draft System Cleaning Kit: This Kit Includes A 32 Oz. Bottle Of Beer Line Cleaner, A 16 Oz. Bottle Of Star San Sanitizer, And A Faucet Brush To Keep Your System Squeaky Clean.
Ball Lock Couplers: These Ball Lock Couplers Are Used To Tap Cornelius Pepsi Kegs, And Includes Both Gas In And Beer Out Couplers For Easy Tapping Of Home Brew Kegs.
Features
- This Nsf approved Kegco 762 commercial grade dual gauge regulator
- Ball lock couplers: these ball lock couplers are used to tap Cornelius Pepsi kegs, and includes both gas in and beer out couplers for easy tapping of home brew kegs
- This Nsf approved 3-1/2 diameter air-cooled stainless steel draft beer tower
- Draft system cleaning kit: this kit includes a 32 oz. bottle of beer line cleaner, a 16 oz. bottle of star san sanitizer, and a faucet brush to keep your system squeaky clean
- See more on Amazon...
First Available: 04/10/2018
Brand: Kegco | Manufacturer: Beverage Factory
See On Amazon #19
Kegco BF SHCK-NT Conversion Kit, 1 Faucet without Tank, Standard
Asin: B0036V8QUQ | Model: BF SHCK-NT | PartNumber: BF SHCK-NT | Ean: 0797734447972 | UPC: 797734447972
Chrome Beer Faucet With Brass Lever: This Nsf-Approved Beer Faucet Features A Forged Brass Body With A Highly Polished Chrome Finish. The Brass Shaft Assembly And Lever Includes A Non-Stick Ball Washer For Smooth Operation. Includes Black Tap Handle..
Includes Detailed Instructions: This Kegerator Conversion Kit Comes With Easy-To-Follow Directions And All The Quality Draft Dispense Components You'll Need To Quickly And Easily Convert Your Refrigerator Into A High-Performance Draft Beer Dispenser..
Standard Metal Beer Faucet Wrench: This Beer Faucet Spanner Wrench Is Built To Last With A Rugged All-Metal Construction And A Convenient 5-1/4" Length. It Allows You To Quickly Loosen Or Tighten Shank Collars Without Scratching Your Faucets..
Ball Lock Keg Couplers: This Ball Lock Home Brew Keg Tap Set Includes Gas In And Beer Out Couplers To Tap Ball Lock Cornelius Pepsi Kegs. The Gas In Comes With A 1/4" Nut And 5/16" Hose Barb Already Attached While The Beer Out Has A 3/16" Hose Barb..
Features
- PRO SERIES DUAL GAUGE REGULATOR: This Kegco 542 Pro Series Dual Gauge Regulator features a top gauge that indicates output pressure and a side gauge that tells you how much CO2 is left in the tank. The chrome plated brass body includes a manual PRV.
- BALL LOCK KEG COUPLERS: This ball lock home brew keg tap set includes gas in and beer out couplers to tap ball lock Cornelius Pepsi kegs. The gas in comes with a 1/4 nut and 5/16 hose barb already attached while the beer out has a 3/16 hose barb.
- CHROME BEER FAUCET WITH BRASS LEVER: This NSF-approved beer faucet features a forged brass body with a highly polished chrome finish. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation. Includes black tap handle.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is built to last with a rugged all-metal construction and a convenient 5-1/4 length. It allows you to quickly loosen or tighten shank collars without scratching your faucets.
- INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow directions and all the quality draft dispense components you'll need to quickly and easily convert your refrigerator into a high-performance draft beer dispenser.
- See more on Amazon...
Brand: Kegco | Manufacturer: Kegco
Dimensions: 10.00 x 10.00 x 12.00 inches | Weight: 6.05 Pounds
Warranty: 1 Year
See On Amazon
Looking For Something Else?
Search