TE-CO 20402 Machinist Clamp Kit, 5/8" Table T-Slot x 1/2-13" Stud, 52 Pieces
Asin: B003HGGS5K | Model: 20402 | PartNumber: 20402 | Ean: 7439724657772
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.5/8" Machine Tool Table T-Slot To Fit 5/8" T-Slot Nuts.
Made From Case Hardened 1018 Steel With A Black-Oxide Finish.
Bridgeport Type Milling Machines Use Part No. 20402.
For Workholding During Machining Applications.
Features
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder
- For workholding during machining applications
- 5/8 machine tool table T-slot to fit 5/8 T-slot nuts
- Bridgeport type milling machines use Part No. 20402
- Made from case hardened 1018 steel with a black-oxide finish
- See more on Amazon...
Brand: Small Parts | Manufacturer: TE-CO
Dimensions: 5.20 x 15.50 x 9.20 Inches
See On Amazon Similar To TECO 20402 Machinist Clamp Kit
#1
MYTEC Home Vise Clamp-On Vise, 3.0"
Asin: B07T5RL3DM | Model: 3.0 | PartNumber: 3.0 | Ean: 0753318733732 | UPC: 753318733732
Protect Table Top: During Installation, There Is No Need For Punching On The Table, With 2 Rubber Washers To Prevent Table Scratch And 2 Jaw Washers For Protection Of The Parts (To Ensure Good Use Of Rubber Gaskets, Please Refer To The Product Picture Before Use. Adjust The Fixing Chin To A Larger Opening First, Then Install The Rubber Washer In The Planned Corresponding Position, Secure It In The End);.
Tips: Please Carefully Browse Our Product Photos To Understand The Size Of Each Part Of The Vise Before Place An Order. We Promise You That If You Have Any Dissatisfaction With This Product, You Can Enjoy The Refund Or Exchange Service At Any Time Without Any Reason.We Welcome You To Contact Us At Any Time, We Will Provide You With A Satisfactory Solution..
Wide Range Of Uses: This Vise Can Hold A Variety Of Parts，O-Shape Swivel Base Allows Vise Rotating Up To 360-Degree, Even If You Are Left-Handed, You Can Rotate The Vise To The Position That Suits Your Work;.
Easy To Install: This Bench Vise Can Be Installed On The Edge Of All Kinds Of Desktops. The Table Board Up To 2.4 Inches Thick Can Be Clamped. Convenient And Quick To Install And Remove;.
Features
- HOME VISE: Net weight 3.62 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch;
- EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove;
- PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end);
- WIDE RANGE OF USES: This vise can hold a variety of parts O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work;
- TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution.
- See more on Amazon...
Brand: MYTEC | Manufacturer: linyihedongmeikegongjuyouxiangongshi
Dimensions: 3.20 x 7.48 x 6.49 inches | Weight: 3.62 pounds
See On Amazon #2
HFS(R) Hold Down Clamp Clamping Set Kit Bridgeport Mill (5/8"Slot 1/2" Stud)
Asin: B00OGI9XFK | Model: 14354 | PartNumber: 14354 | Ean: 0819300015702 | UPC: 819300015702
[Material]: Made Of High Quality Tool Steel For Long Life And Increased Durability. All Parts Heat Treated..
[Wide Application]: Suitable For Use With Bridgeport Mills And Other Milling Machines, Ideal For Holding Down Workpieces Securely And Accurately..
[Easy To Use]: Designed For Easy Installation And Removal, Allowing For Quick And Hassle-Free Use..
[Packing]: T Nut No. Tn-0212 Step Clamp 25S-12, 40S-12, 60S-12, (2Pcs Each Size) Setp Block: Stb-1, Stb-2, Stb-3 (2Pcs Each Size).
Features
- [SIZE]: Table T-Slot size: 5/8IN, Stud size: 1/2IN-13
- [PACKING]: T Nut No. TN-0212 Step Clamp 25S-12, 40S-12, 60S-12, (2pcs Each size) Setp Block: STB-1, STB-2, STB-3 (2pcs Each size)
- [MATERIAL]: Made of high quality tool steel for long life and increased durability. All parts heat treated.
- [Easy to Use]: Designed for easy installation and removal, allowing for quick and hassle-free use.
- [Wide Application]: Suitable for use with Bridgeport mills and other milling machines, ideal for holding down workpieces securely and accurately.
- See more on Amazon...
Brand: HFS | Manufacturer: HFS
Weight: 19.14 Pounds
See On Amazon #3
58 Pc Pro-Series 5/8" T-Slot Clamping Kit Bridgeport Mill Set Up Set 1/2-13
Asin: B01BH8MTCU | Model: 77015M | PartNumber: 77015M | Ean: 0609728674366 | UPC: 609728674366
Made Of High Quality Casting Steel For Long Life And Increased Durability. All Parts Heat Treated..
5/8" T-Slot, 1/2-13 Stud Size, & 1" Step Block Width (All Standard).
Fits All Bridgeport & Bridgeport Type Machines!.
Features
- Our part # ALL-48010
- Fits all Bridgeport & Bridgeport type machines!
- Made of high quality casting steel for long life and increased durability. All parts heat treated.
- 5/8 T-Slot, 1/2-13 stud size, & 1 step block width (all standard)
- See more on Amazon...
Brand: All Industrial Tool Supply | Manufacturer: TFT Tools
See On Amazon #4
58Pc T-Slot Clamping Kit Mill Machinist Set Table Slots: 1/2"
Asin: B07PRZ533T | Model: JJ-58-1/2 | PartNumber: JJ-58-1/2 | Ean: 0722704103138 | UPC: 722704103138
1/2 Table Slot And 3/8- 16 Stud Size.
Popular Design With Sturdy Stand.
24 Studs: 4 Each Of Length: 3"-4"-5"-6"-7"-8" 6 T-Nuts To Fit Your Machine 6 Flange Nuts 4 Coupling Nuts 4 Flanged Nuts 6 Step Blocks 6 Step Clamps.
High Grade Hardened Steel.
Features
- For Use Milling Machines & Drill Presses
- High grade hardened steel
- 1/2 Table Slot And 3/8- 16 Stud Size
- 24 Studs: 4 each of length: 3-4-5-6-7-8 6 T-Nuts to fit your machine 6 Flange Nuts 4 Coupling Nuts 4 Flanged Nuts 6 Step Blocks 6 Step Clamps
- Popular Design With Sturdy Stand
- See more on Amazon...
Brand: LLDSIMEX | Manufacturer: LLDSIMEX
See On Amazon #5
Grizzly T10079 Machinist/Toolmakers Paralle Length Clamps, 1 Pair
Asin: B006SJK1LU | Model: T10079 | PartNumber: T10079 | Ean: 7466655978706, 7464647404899, 0690550089329 | UPC: 690550089329
Approximate Weight: 0.4 Lbs.
Maximum Jaw Opening Is 1-1/2".
Brand: Grizzly | Manufacturer: Grizzly
Dimensions: 0.86 x 4.56 x 4.72 Inches | Weight: 0.45 Pounds
See On Amazon #6
LLDSIMEX 2PCS Set Steel Milling Machine Vise Quick Clamp Work Stop
Asin: B0BM3DLW5B | Model: LLDS-QC-1 | PartNumber: LLDS-QC-1 | Ean: 0722704103824 | UPC: 722704103824
Sold 2Pc Each Order.
Hardened Steel Body, Two Steel Guide Pins For Ppostive Cmamping.
Clamps Quickly And Easily To The All Milling Vises Top Of Hard Or Soft Jaws.
Steel Body 1. 5" Wide X . 5" Height.
Features
- Fits mill vises with 1/2-1" jaws
- Steel body 1. 5 Wide x . 5 Height
- Sold 2PC each order
- Clamps quickly and easily to the all milling vises top of hard or soft jaws
- Hardened steel body, two steel guide pins for ppostive cmamping
- See more on Amazon...
Brand: LLDSIMEX | Manufacturer: LLDSIMEX
Weight: 0.33 Pounds
See On Amazon #7
TE-CO 20402PL Machinist Promo Kit, 5/8" Table T-Slot x 1/2-13" Stud, 52 Pieces
Asin: B003HGGS64 | Model: 20402PL | PartNumber: 20402PL | Ean: 0094705538258 | UPC: 094705538258
5/8" Machine Tool Table T-Slot To Fit 5/8" T-Slot Nuts.
Made From Case Hardened 1018 Steel With A Black-Oxide Finish.
Bridgeport Type Milling Machines Use Part No. 20402.
For Workholding During Machining Applications.
Features
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder
- For workholding during machining applications
- 5/8 machine tool table T-slot to fit 5/8 T-slot nuts
- Bridgeport type milling machines use Part No. 20402
- Made from case hardened 1018 steel with a black-oxide finish
- See more on Amazon...
Brand: Small Parts | Manufacturer: TE-CO
Dimensions: 5.20 x 15.80 x 9.30 inches | Weight: 19.00 Pounds
See On Amazon #8
58Pc T-Slot Clamping Kit Mill Machinist Set Table Slots
Asin: B0CTZRJL3H | Model: 58PC 1/2’’ T-Slot Clamping Kit | PartNumber: 58PC 1/2’’ T-Slot Clamping Kit
In Addition To The Studs, The Kit Also Includes 6 T-Nuts To Fit Your Machine, 6 Flange Nuts, 4 Coupling Nuts, 4 Flanged Nuts, 6 Step Blocks, And 6 Step Clamps. These Accessories Provide The Necessary Support And Stability For Your Workpieces, Allowing For Precise And Accurate Machining..
Overall, The 58Pcs T-Slot Clamping Kit, Or T Slot Accessories, Is A Reliable And Essential Tool For Any Lathe Milling Machine. Its High-Grade Hardened Steel Construction, Versatile Components, And Convenient Stand Make It A Must-Have For Professionals And Hobbyists Alike..
To Further Enhance Convenience And Functionality, This Popular Design Also Comes With A Sturdy Stand. This Stand Ensures Easy Access And Organization Of The Accessories, Keeping Everything Within Reach And In Order..
Featuring A 1/2 Table Slot And A 3/8-16 Stud Size, This Kit Includes A Variety Of Components To Suit Your Needs. The Set Includes 24 Studs, With 4 Each Of Lengths 3", 4", 5", 6", 7", And 8", Ensuring Versatility And Adaptability For Different Projects..
Features
- The 58Pcs T-Slot Clamping Kit, also known as t slot accessories, is specifically designed for use with milling machines and drill presses. These high-grade hardened steel accessories are essential for securely clamping workpieces in place during machining operations.
- Featuring a 1/2 table slot and a 3/8-16 stud size, this kit includes a variety of components to suit your needs. The set includes 24 studs, with 4 each of lengths 3, 4, 5, 6, 7, and 8, ensuring versatility and adaptability for different projects.
- In addition to the studs, the kit also includes 6 T-nuts to fit your machine, 6 flange nuts, 4 coupling nuts, 4 flanged nuts, 6 step blocks, and 6 step clamps. These accessories provide the necessary support and stability for your workpieces, allowing for precise and accurate machining.
- To further enhance convenience and functionality, this popular design also comes with a sturdy stand. This stand ensures easy access and organization of the accessories, keeping everything within reach and in order.
- Overall, the 58Pcs T-Slot Clamping Kit, or t slot accessories, is a reliable and essential tool for any lathe milling machine. Its high-grade hardened steel construction, versatile components, and convenient stand make it a must-have for professionals and hobbyists alike.
- See more on Amazon...
Brand: DNYSYSJ | Manufacturer: DNYSYSJ
See On Amazon #9
58Pc T-Slot Clamping Kit Mill Machinist Set with T-Slot Cleaner and Tightening Wrench (1/2 Table Slot 3/8-16 Stud Size)
Asin: B0BBV5P1WP | Ean: 0722704104005 | UPC: 722704104005
24 Studs: 4 Each Of Length: 3"-4"-5"-6"-7"-8" 6 T-Nuts To Fit Your Machine 6 Flange Nuts 4 Coupling Nuts 4 Flanged Nuts 6 Step Blocks 6 Step Clamps And 1 Wall Rack,1Pc Each T-Slot Cleaner And Tightening Wrench.
This Set Fits 1/2-Inch T-Slots And Includes 3/8-Inch Studs.
Each Clamping Kit Includes: Studs Step Block Pairs T-Nuts Flange Nuts Coupling Nuts And End Hold-Downs, T-Slot Cleaner And Tightening Wrench..
Features
- Made of high quality casting steel for long life and increased durability. All parts heat treated.
- Each clamping kit includes: studs step block pairs T-nuts flange nuts coupling nuts and end hold-downs, T-slot cleaner and Tightening Wrench.
- 24 Studs: 4 each of length: 3-4-5-6-7-8 6 T-Nuts to fit your machine 6 Flange Nuts 4 Coupling Nuts 4 Flanged Nuts 6 Step Blocks 6 Step Clamps and 1 wall rack,1PC Each T-slot cleaner and Tightening Wrench
- This Set Fits 1/2-Inch T-slots and Includes 3/8-Inch studs
- See more on Amazon...
Brand: SP1stopmall | Manufacturer: SP1stopmall
Weight: 12.57 Pounds
See On Amazon #10
58 Pc Pro-Series 1/2 T-Slot Clamping Kit Mill Machinist Set 3/8-16
Asin: B01BH8MU2O | Ean: 0609728674359 | UPC: 609728674359
1/2" T-Slot, 3/8-16 Stud Size, & 1" Step Block Width (All Standard).
Contains (24) Studs- (4) Each Of 3", 4", 5", 6", 7", & 8" Long.
Made Of High Quality Casting Steel For Long Life And Increased Durability. All Parts Heat Treated..
Features
- Our part # ALL-48005
- Made of high quality casting steel for long life and increased durability. All parts heat treated.
- 1/2 T-Slot, 3/8-16 stud size, & 1 step block width (all standard)
- Contains (24) Studs- (4) each of 3, 4, 5, 6, 7, & 8 long
- See more on Amazon...
Brand: All Industrial Tool Supply | Manufacturer: TFT Tools
See On Amazon #11
TE-CO 20416 Machinist Clamp Kit, 3/4" Table T-Slot x 5/8-11" Stud, 52 Pieces
Asin: B003HGGS78 | Model: 20416 | PartNumber: 20416
3/4" Machine Tool Table T-Slot To Fit 3/4" T-Slot Nuts.
Made From Case Hardened 1018 Steel With A Black-Oxide Finish.
Bridgeport Type Milling Machines Use Part No. 20402.
For Workholding During Machining Applications.
Features
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder
- For workholding during machining applications
- 3/4 machine tool table T-slot to fit 3/4 T-slot nuts
- Bridgeport type milling machines use Part No. 20402
- Made from case hardened 1018 steel with a black-oxide finish
- See more on Amazon...
First Available: 11/25/2017
Brand: Small Parts | Manufacturer: TE-CO
Weight: 28.10 Pounds
See On Amazon #12
TE-CO 20401 Machinist Clamp Kit, 9/16" Table T-Slot x 1/2-13" Stud, 52 Pieces
Asin: B003HGGS5A | Model: 20401 | PartNumber: 20401 | Ean: 7759833367905
9/16" Machine Tool Table T-Slot To Fit 9/16" T-Slot Nuts.
Made From Case Hardened 1018 Steel With A Black-Oxide Finish.
Bridgeport Type Milling Machines Use Part No. 20402.
For Workholding During Machining Applications.
Features
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder
- For workholding during machining applications
- 9/16 machine tool table T-slot to fit 9/16 T-slot nuts
- Bridgeport type milling machines use Part No. 20402
- Made from case hardened 1018 steel with a black-oxide finish
- See more on Amazon...
Brand: Small Parts | Manufacturer: TE-CO
Dimensions: 5.40 x 15.50 x 9.10 inches | Weight: 21.00 Pounds
See On Amazon #13
TE-CO 20415 Machinist Clamp Kit, 11/16" Table T-Slot x 5/8-11" Stud, 52 Pieces
Asin: B003HGGS6O | Model: 20415 | PartNumber: 20415
11/16" Machine Tool Table T-Slot To Fit 11/16" T-Slot Nuts.
Made From Case Hardened 1018 Steel With A Black-Oxide Finish.
Bridgeport Type Milling Machines Use Part No. 20402.
For Workholding During Machining Applications.
Features
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder
- For workholding during machining applications
- 11/16 machine tool table T-slot to fit 11/16 T-slot nuts
- Bridgeport type milling machines use Part No. 20402
- Made from case hardened 1018 steel with a black-oxide finish
- See more on Amazon...
Brand: Small Parts | Manufacturer: TE-CO
Dimensions: 5.40 x 18.00 x 9.40 inches
See On Amazon #14
TE-CO 20403 Machinist Clamp Kit, 11/16" Table T-Slot x 1/2-13" Stud, 52 Pieces
Asin: B003HGGS6E | Ean: 0723434463691 | UPC: 723434463691
11/16" Machine Tool Table T-Slot To Fit 11/16" T-Slot Nuts.
Made From Case Hardened 1018 Steel With A Black-Oxide Finish.
Bridgeport Type Milling Machines Use Part No. 20402.
For Workholding During Machining Applications.
Features
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder
- For workholding during machining applications
- 11/16 machine tool table T-slot to fit 11/16 T-slot nuts
- Bridgeport type milling machines use Part No. 20402
- Made from case hardened 1018 steel with a black-oxide finish
- See more on Amazon...
Brand: Small Parts | Manufacturer: TE-CO
Dimensions: 6.00 x 6.00 x 6.00 inches
See On Amazon #15
HHIP 3402-0003, 4-1/8 L X 4-1/8 W X 3-1/16 H Precision V-Block & CLAMP Set
Asin: B00N40U79W | Model: 3402-0003 | PartNumber: 3402-0003 | Ean: 0769053011783 | UPC: 769053011783
90° Vee Blocks.
Supplied With Bolts And Clamps In Wooden Case.
Supplied In A Matched Pair.
Hardened & Ground To Rc 58-60.
Features
- Guaranteed square parallel within .0002"
- Hardened & ground to RC 58-60
- 90 Vee blocks
- Supplied in a matched pair
- Supplied with bolts and clamps in wooden case
- See more on Amazon...
Brand: HHIP | Manufacturer: HHIP
Dimensions: 4.00 x 4.00 x 8.00 Inches
See On Amazon #16
TE-CO 20413 Machinist Clamp Kit, 1/2" Table T-Slot x 3/8-16" Stud, 52 Pieces
Asin: B003HGGS4Q | Model: 20413 | PartNumber: 20413 | Ean: 7803175857843
1/2" Machine Tool Table T-Slot To Fit 1/2" T-Slot Nuts.
Made From Case Hardened 1018 Steel With A Black-Oxide Finish.
Bridgeport Type Milling Machines Use Part No. 20402.
For Workholding During Machining Applications.
Features
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder
- For workholding during machining applications
- 1/2 machine tool table T-slot to fit 1/2 T-slot nuts
- Bridgeport type milling machines use Part No. 20402
- Made from case hardened 1018 steel with a black-oxide finish
- See more on Amazon...
Brand: Small Parts | Manufacturer: TE-CO
Dimensions: 5.00 x 15.70 x 9.20 inches
See On Amazon #17
CheriMuMu 58Pcs Nut Clamp machine Clamping Kit, T-Slot M12 Clamping Kit Mill Machinist Set with Storage Box, Hardened Combined Press Plate for Lathe Milling Machine and Metal Processing
Asin: B0CVVSSJCK | Model: M12 | PartNumber: M12
【Easy To Store】The 58Pcs T-Slot Clamping Kit Is Equipped With A Plastic Storage Box With Card Slots Of Different Sizes, Which Excellently Accommodates All The Parts Of This Set, Making You Not Afraid To Misplace The Parts And Find Them Difficult. Meanwhile, The Two Pre-Drilled Holes On The Back Allow You To Mount It On The Wall..
【High-Quality Material】The 58Pcs T-Slot Clamping Kit, Is Made Of High-Quality 45# Steel, Which Is Impact-Resistant, High-Strength (48°), And Durable..
【Portable Design】The Compact Size (13*3.5*4.3Inch) Makes The 58Pcs T-Slot Clamping Kit Easy To Carry And Move, Which Can Be Flexibly Applied To Different Work Scenes..
【Excellent Performance】With Exquisite Workmanship And High Precision, This 58Pcs T-Slot Clamping Set Ensures Strong Force And Stable Clamping, Allowing For Easy Locking, Reducing Time, And Increasing Efficiency..
Features
- Set of 58 PCS The t-slot clamping kit package includes 6 flange nuts, 6 T-slot nuts, 4 connecting nuts, 12 step mat irons, 6 stepped press plates, and 24 studs, which is a complete set to meet the needs of lathe operations.
- Excellent Performance With exquisite workmanship and high precision, this 58pcs t-slot clamping set ensures strong force and stable clamping, allowing for easy locking, reducing time, and increasing efficiency.
- Easy to Store The 58pcs t-slot clamping kit is equipped with a plastic storage box with card slots of different sizes, which excellently accommodates all the parts of this set, making you not afraid to misplace the parts and find them difficult. Meanwhile, the two pre-drilled holes on the back allow you to mount it on the wall.
- Portable Design The compact size (13*3.5*4.3inch) makes the 58pcs t-slot clamping kit easy to carry and move, which can be flexibly applied to different work scenes.
- High-quality Material The 58pcs t-slot clamping kit, is made of high-quality 45# steel, which is impact-resistant, high-strength (48 ), and durable.
- See more on Amazon...
Brand: CheriMuMu | Manufacturer: CHERIMUMU
See On Amazon #18
Promotional Machinist Kit, Easy to Carry Clamp Kit Heat Treatment Good Clamping Force 58 Pieces with Box for M10 Lathe Milling Machine
Asin: B0CMDBV9H6 | Model: Demerase1myigczt4 | PartNumber: Demerase1myigczt4
There Is A Storage Box Which You Can Store And Convenient To Carry.
All Parts Are Heat-Treated, Black-Oxidized And Housed In A Wall-Mounted Steel Frame.
Applicable To The Specifications Of T-Slots Of Various Mechanical Worktables, Designed For Fixed Use Of Molds, Jigs, Etc..
Very Suitable For Clamping Real, Square, Parallel And Other Workpieces, With Good Clamping Force.
Features
- M10 bolts are suitable for 12mm desktop T-slots, especially for Axminster Sieg X2, for Super X2, X3 and for Super X3 machines.
- Very suitable for clamping real, square, parallel and other workpieces, with good clamping force
- There is a storage box which you can store and convenient to carry
- Applicable to the specifications of T-slots of various mechanical worktables, designed for fixed use of molds, jigs, etc.
- All parts are heat-treated, black-oxidized and housed in a wall-mounted steel frame
- See more on Amazon...
Brand: Demeras | Manufacturer: Demeras
See On Amazon #19
TECKEEN 4* Model Seamless Auxiliary Clamp Tool with Anti-Skid Pads Model Tool Set
Asin: B0BL7H8Q1W
High-Elastic Steel Springs Are Treated With Electrophoresis And Anti-Rust, Providing A Stable Clamping Force Output Of 1.5Kg.
It Is Made Of Impact-Resistant Abs Plastic Material, Which Is Firm And Durable, And Will Not Deform After Long-Term Use.
Free Hands, Seamless Processing, No Need To Pinch, Clamp Both Sides And Wait For The Job To Be Completed.
Suitable For 0-30Mm Wide Model Parts For Seamless Operation Clamping.
Features
- Silicone anti-skid pads can hold the model steadily without hurting the model, and will not slip even when clamped on a curved surface
- Suitable for 0-30mm wide model parts for seamless operation clamping
- High-elastic steel springs are treated with electrophoresis and anti-rust, providing a stable clamping force output of 1.5KG
- Free hands, seamless processing, no need to pinch, clamp both sides and wait for the job to be completed
- It is made of impact-resistant ABS plastic material, which is firm and durable, and will not deform after long-term use
- See more on Amazon...
Brand: TECKEEN | Manufacturer: TECKEEN
See On Amazon
Looking For Something Else?
Search