SKF 99116 Speedi Sleeve and Tool Kit, Inch, 1.125in Shaft Diameter, 0.375in Width
Asin: B00460DH5U | Model: 99116 | PartNumber: 99116 | Ean: 0085311158978 | UPC: 085311158978
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional."Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 3.94 x 9.84 x 0.91 inches
See On Amazon Similar To SKF 99116 Speedi Sleeve and
#1
SKF Seal - 16500
Asin: B000C09MRA | Model: 16500 | PartNumber: 16500 | Ean: 0085311017169 | UPC: 085311017169
Item Package Quantity - 1.
Product Type - Auto Part.
Item Package Weight - 0.08 Pounds.
Features
- Item Package Dimension: 3.13L x 3.13W x 0.63H inches
- Item Package Weight - 0.08 Pounds
- Item Package Quantity - 1
- Product Type - AUTO PART
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA, Inc.
Dimensions: 0.63 x 3.13 x 3.13 inches | Weight: 0.08 Pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #2
SKF 14816 LDS & Small Bore Seal, R Lip Code, HM14 Style, Inch, 1.5" Shaft Diameter, 1.938" Bore Diameter, 0.25" Width
Asin: B00CLIVWOW | Ean: 0085311014700 | UPC: 085311014700
Brand: SKF | Manufacturer: SKF
Weight: 0.04 pounds
See On Amazon #3
SKF 99171 Speedi Sleeve and Tool Kit, Inch, 1.718in Shaft Diameter, 0.563in Width
Asin: B000EPR7FW | Model: 99171 | PartNumber: 99171 | Ean: 0085311041522 | UPC: 085311041522
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 inches | Weight: 0.15 Pounds
See On Amazon #4
SKF 99814 Speedi Sleeve, Inch, 1in Shaft Diameter, 0.313in Width
Asin: B004609G1E | Model: 99814 | PartNumber: 99814 | Ean: 0085311185646 | UPC: 085311185646
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 3.94 x 9.84 x 0.91 Inches
See On Amazon #5
SKF 99290 Speedi Sleeve, Inch, 2.938in Shaft Diameter, 0.500in Width
Asin: B002ES8FN0 | Model: 99290 | PartNumber: 99290 | Ean: 0085311042208 | UPC: 085311042208
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 3.94 x 9.84 x 0.91 inches
See On Amazon #6
SKF 70016 LDS & Small Bore Seal, R Lip Code, CRWH1 Style, Inch, 7" Shaft Diameter, 8" Bore Diameter, 0.63" Width
Asin: B00460HLMU | Ean: 0085311039468 | UPC: 085311039468
Single Lip.
Seal.
Spring Loaded.
Oil Seal.
Brand: SKF | Manufacturer: SKF
Dimensions: 3.94 x 9.84 x 0.63 inches | Weight: 0.80 Pounds
See On Amazon #7
SKF 16999 LDS & Small Bore Seal, R Lip Code, CRW1 Style, Inch, 1.688" Shaft Diameter, 2.875" Bore Diameter, 0.313" Width
Asin: B000C05NJG | Model: 16999 | PartNumber: 16999 | Ean: 0085311017879 | UPC: 085311017879
Item Package Quantity - 1.
Product Type - Auto Part.
Item Package Weight - 0.05 Pounds.
Features
- Item Package Dimension: 3.2L x 3.2W x 0.7H inches
- Item Package Weight - 0.05 Pounds
- Item Package Quantity - 1
- Product Type - AUTO PART
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Weight: 0.01 pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #8
SKF 16113 LDS & Small Bore Seal, R Lip Code, CRW1 Style, Inch, 1.625" Shaft Diameter, 2.437" Bore Diameter, 0.313" Width
Asin: B00CLIV8IM | Model: 16113 | PartNumber: 16113 | Ean: 0853114976576 | UPC: 853114976576
Item Package Quantity:1.
Country Of Origin: United States.
Item Package Dimension:6.35 Cm L X6.35 Cm W X1.016 Cm H.
Features
- Product Type:Bearings And Bushings
- Item Package Dimension:6.35 cm L X6.35 cm W X1.016 cm H
- Item Package Quantity:1
- Country Of Origin: United States
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
See On Amazon #9
SKF 16406 LDS & Small Bore Seal, R Lip Code, CRW1 Style, Inch, 1.625" Shaft Diameter, 2.875" Bore Diameter, 0.313" Width
Asin: B00CLIV30U | Model: 16406 | PartNumber: 16406 | Ean: 0085311017121 | UPC: 085311017121
Seal Lip Profile All Skf Seals Incorporate A Seal Lip Design That Meets Or Exceeds The Oe Specifications. This Provides The Toughest Exclusion Of Dirt And Contaminants, Reliable Dynamic Sealing And A Long Service Life..
The Case Components Are Made From The Highest Grade Of Carbon Steel, And Are Coated With Phosphate To Ensure Protection Against Rust. Most Metal-Cased Seals Are Coated With Bore-Tite, A Flexible Coating On The Outside Diameter Of The Seal That Fills In Small Housing Bore Imperfections, And Provides A Tight And Leak Proof Seal..
Sealing Element Skf’S Synthetic Rubber Blends Are Formulated From Families Of Complex Polymers To Provide Protection To Operate In Temperatures As Low As Minus 40 Degrees To As High As 400 Degrees Fahrenheit. Today’S Lubricants With Their Aggressive Additive Packages Can Attack The Rubber Compound Of The Seal. Skf Seals Are Engineered To Be Compatible With These Lubricants.
Skf Has A Long History In Sealing Knowledge. From Our Patent On The First Automotive Wheel Seal In 1928, We Have Evolved To A Leading Supplier Of Automotive And Truck Sealing Technology. The Demand For Increased Speeds, Higher Operating Temperatures And Synthetic Lubricants With Aggressive Additives Increase The Stress On Oil And Grease Seals. Skf Seals Deliver Unparalleled Performance Over A Wide Range Of Operating Conditions For Most Automotive And Truck Applications..
Features
- Specifications: Shaft Dia in/mm: 1.625/41.280 | Bore Dia in/mm: 2.875/73.030 | Outer Dia in/mm: 2.879/73.130 | Width in/mm: 0.313/7.950 | Seal Construction Type: CRW1 | Seal Lip Material: Nitrile | Boretite: Yes
- SKF has a long history in sealing knowledge. From our patent on the first automotive wheel seal in 1928, we have evolved to a leading supplier of automotive and truck sealing technology. The demand for increased speeds, higher operating temperatures and synthetic lubricants with aggressive additives increase the stress on oil and grease seals. SKF seals deliver unparalleled performance over a wide range of operating conditions for most automotive and truck applications.
- Seal lip profile All SKF seals incorporate a seal lip design that meets or exceeds the OE specifications. This provides the toughest exclusion of dirt and contaminants, reliable dynamic sealing and a long service life.
- Sealing element SKF s synthetic rubber blends are formulated from families of complex polymers to provide protection to operate in temperatures as low as minus 40 degrees to as high as 400 degrees Fahrenheit. Today s lubricants with their aggressive additive packages can attack the rubber compound of the seal. SKF seals are engineered to be compatible with these lubricants
- The case components are made from the highest grade of carbon steel, and are coated with phosphate to ensure protection against rust. Most metal-cased seals are coated with Bore-Tite, a flexible coating on the outside diameter of the seal that fills in small housing bore imperfections, and provides a tight and leak proof seal.
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 3.00 x 32.00 x 10.00 inches | Weight: 0.05 Pounds
See On Amazon #10
SKF 16180 LDS & Small Bore Seal, R Lip Code, CRW1 Style, Inch, 1.625" Shaft Diameter, 2.441" Bore Diameter, 0.313" Width
Asin: B00460HBGQ | Model: 16180 | PartNumber: 16180 | Ean: 0085311016841 | UPC: 085311016841
Superior Fluid And Temperature Compatibility.
Excellent Contamination Exclusion.
Optimized Compounds Perform Reliably In Extreme Operating Conditions.
Features
- Keeps Lubricants in and Contaminants Out
- Optimized Compounds Perform Reliably In Extreme Operating Conditions
- Superior Fluid And Temperature Compatibility
- Excellent Contamination Exclusion
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 3.94 x 9.84 x 0.31 Inches | Weight: 0.05 Pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #11
SKF 99817 Speedi Sleeve, Inch, 1.25in Shaft Diameter, 0.313in Width
Asin: B00460DI18 | Model: 99817 | PartNumber: 99817 | Ean: 0085311185745 | UPC: 085311185745
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 3.94 x 9.84 x 0.91 inches
See On Amazon #12
SKF 16900 LDS & Small Bore Seal, R Lip Code, CRW1 Style, Inch, 1.688" Shaft Diameter, 2.75" Bore Diameter, 0.313" Width
Asin: B00460IM50 | Model: 16900 | PartNumber: 16900 | Ean: 0085311017800 | UPC: 085311017800
Features
- SKF 16900 LDS & Small Bore Seal, R Lip Code, CRW1 Style, Inch, 1.688" Shaft Diameter, 2.75" Bore Diameter, 0.313" Width
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 3.94 x 9.84 x 0.31 inches | Weight: 0.06 Pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #13
SKF 16650 Grease Seals
Asin: B000EPR4QY | Model: 16650 | PartNumber: 16650 | Ean: 0085311017497 | UPC: 085311017497
Superior Fluid And Temperature Compatibility.
Excellent Contamination Exclusion.
Optimized Compounds Perform Reliably In Extreme Operating Conditions.
Features
- Keeps Lubricants in and Contaminants Out
- Optimized Compounds Perform Reliably In Extreme Operating Conditions
- Superior Fluid And Temperature Compatibility
- Excellent Contamination Exclusion
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 0.63 x 2.50 x 2.50 inches
Warranty: 12 Month 12,000 Miles
See On Amazon #14
SKF Seal 16489 For Lexus Toyota Nissan Mazda
Asin: B000C07LQY | Model: 16489 | PartNumber: 16489 | Ean: 0085311287197 | UPC: 085311287197
Item Package Quantity - 1.
Product Type - Auto Part.
Item Package Weight - 0.05 Pounds.
Features
- Item Package Dimension: 2.5L x 2.5W x 0.6H inches
- Item Package Weight - 0.05 Pounds
- Item Package Quantity - 1
- Product Type - AUTO PART
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA, Inc.
Dimensions: 0.63 x 2.50 x 2.50 inches | Weight: 0.05 pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #15
SKF Seal - 16148
Asin: B00D0IIUI8 | Model: 16148 | PartNumber: 16148 | Ean: 0085311474825 | UPC: 085311474825
Optimized Compounds Perform Reliably In Extreme Operating Conditions.
Excellent Contamination Exclusion.
Superior Fluid And Temperature Compatibility.
Keeps Lubricants In And Contaminants Out.
Features
- SKF Seal - 16148
- Keeps Lubricants in and Contaminants Out
- Optimized Compounds Perform Reliably In Extreme Operating Conditions
- Superior Fluid And Temperature Compatibility
- Excellent Contamination Exclusion
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA, Inc.
Dimensions: 2.00 x 3.13 x 3.13 Inches
Warranty: 12 Month 12,000 Miles
See On Amazon #16
SKF 99190 Speedi Sleeve, Inch, 1.875in Shaft Diameter, 0.175in Width
Asin: B00460IKKM | Model: 99190 | PartNumber: 99190 | Ean: 0085311041676 | UPC: 085311041676
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 3.94 x 9.84 x 0.91 inches | Weight: 0.10 Pounds
See On Amazon #17
SKF 16168 LDS & Small Bore Seal, R Lip Code, HM21 Style, Inch, 1.625" Shaft Diameter, 2.437" Bore Diameter, 0.25" Width
Asin: B00460GWKM | Model: 16168 | PartNumber: 16168 | Ean: 0085311016827 | UPC: 085311016827
Brand: SKF | Manufacturer: SKF
Weight: 0.05 Pounds
See On Amazon #18
SKF 99810 Speedi Sleeve, Inch, 0.625in Shaft Diameter, 0.313in Width
Asin: B00460E3XK | Model: 99810 | PartNumber: 99810 | Ean: 0085311185615 | UPC: 085311185615
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 3.94 x 9.84 x 0.91 inches
See On Amazon #19
SKF BR16 Tapered Roller Bearings
Asin: B000CKQ2KU | Model: BR16 | PartNumber: BR16 | Ean: 0085311058872 | UPC: 085311058872
The Superior Roller End/Flange Contact Virtually Eliminates Temperature Peaks During Start-Up. Because Friction, Heat And Wear During Initial Start-Up Is Minimized, Special Running-In Procedures Are Not Necessary.
Our Expertise In Bearing Design, Tribology, Metallurgy, Lubrication And Manufacturing Have Come Together To Create Skf Explorer Class Bearings. A New Standard Of Excellence In Design, Performance And Precision Manufacturing – One That Is Still Unmatched In The Marketplace. Skf Explorer Bearings Are A Result Of Extremely High Steel Quality. Optimized Design. Manufacturing Process Improvements. Tighter Tolerances And Less Spread.
Thanks To Their Specific Geometry And Internal Load Distribution, All Tapered Roller Bearings Can Handle Combined Axial And Radial Loads. The Contact Angle Of Their Raceways Converges On A Common Point On The Bearing Axis, And That Angle Can Be Selected To Deliver Optimum Axial And Radial Load Capabilities For A Given Application.
Skf Tapered Roller Bearings Are Designed To Meet And Exceed The Quality And Performance Requirements Of Applications Where There Are Heavy Combined Loads And Tilting Moments. The Logarithmic Profile Of The Rollers Provides Superior Load Distribution. The Design Of The Flange/Roller-End Contact Area Reduces Edge Loading And Promotes The Formation Of A Lubricant Film Even Under Arduous Operating Conditions..
Features
- Cone Inner Dia (IN): 0.8656 / Cone Length (IN): 0.655 / Cone Radius (IN): 0.05 / Cup Length (IN): 0.475 / Width (IN): 0.61
- SKF tapered roller bearings are designed to meet and exceed the quality and performance requirements of applications where there are heavy combined loads and tilting moments. The logarithmic profile of the rollers provides superior load distribution. The design of the flange/roller-end contact area reduces edge loading and promotes the formation of a lubricant film even under arduous operating conditions.
- The superior roller end/flange contact virtually eliminates temperature peaks during start-up. Because friction, heat and wear during initial start-up is minimized, special running-in procedures are not necessary
- Thanks to their specific geometry and internal load distribution, all tapered roller bearings can handle combined axial and radial loads. The contact angle of their raceways converges on a common point on the bearing axis, and that angle can be selected to deliver optimum axial and radial load capabilities for a given application
- Our expertise in bearing design, tribology, metallurgy, lubrication and manufacturing have come together to create SKF Explorer class bearings. A new standard of excellence in design, performance and precision manufacturing one that is still unmatched in the marketplace. SKF Explorer bearings are a result of extremely high steel quality. Optimized design. Manufacturing process improvements. Tighter tolerances and less spread
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 0.75 x 2.06 x 2.06 inches | Weight: 0.26 Pounds
Warranty: One Year
See On Amazon
Looking For Something Else?
Search