XS Scuba Deluxe K Valve
Asin: B004YD3KZG
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: XS Scuba
Dimensions: 1.70 x 4.50 x 4.50 inches | Weight: 1.50 Pounds
See On Amazon Similar To XS Scuba Deluxe K Valve
#1
XS Scuba Brass 2nd Stage Quick Disconnect
Asin: B007YWLCCM | Model: SG_B007YWLCCM_US | PartNumber: SG_B007YWLCCM_US | Ean: 0649823910624 | UPC: 649823910624
Lock-Down Screw To Prevent Accidental Disconnection.
Low Pressure Use Only - Below 200 Psi.
Installs Between Low Pressure Regulator Hose And Second Stage.
Features
- Add a quick-disconnect to most regulators or full face masks
- Installs between low pressure regulator hose and second stage
- Lock-down screw to prevent accidental disconnection
- Low pressure use only - below 200 psi
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 0.90 x 2.10 x 2.70 inches | Weight: 0.30 pounds
See On Amazon #2
XS Scuba Universal Valve Caps - Green
Asin: B004NG0D5E | Model: VC-GN | PartNumber: VC-GN
Nylon Cord Lanyard Included - Not Attached.
Available In Five Colors.
Protect The Valve Outlet.
Features
- Fits Deluxe K and PRO valves
- Protect the valve outlet
- Nylon cord lanyard included - not attached
- Available in five colors
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Weight: 0.01 Pounds
See On Amazon #3
XS Scuba Deluxe Cylinder Equalizer with Braided HP Hose
Asin: B00A7R8PSA | Ean: 0649823892012 | UPC: 649823892012
Gauge Boot Included - Snug Fitting, Silicone Compound For Protection Of Gauge.
Braided Hp Hose Length: 60 In (152 Cm).
Attaches To K, Pro And Din Valves.
Easy Replacement Bleed Screw.
Braided Hp Hose Thin Diameter: 0.32 In (8 Mm).
Stainless Steel Twist Bleed Screw With Positive Seal Pdvf Seat.
Combo Attachment Includes Two Spin On Yoke Adapters.
Dual Scale: 0 To 5000 Psi And 0 To 350 Bar.
Features
- Easy read 2.75 in (69.8 mm) diameter gauge with stainless steel case
- Dual scale: 0 to 5000 psi and 0 to 350 bar
- Gauge boot included - snug fitting, silicone compound for protection of gauge
- Stainless steel twist bleed screw with positive seal PDVF seat
- Easy replacement bleed screw
- Braided HP hose thin diameter: 0.32 in (8 mm)
- Braided HP hose length: 60 in (152 cm)
- Attaches to K, PRO and DIN valves
- Combo attachment includes two spin on yoke adapters
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 12.20 x 2.70 x 7.60 inches | Weight: 3.46 Pounds
See On Amazon #4
XS Scuba EZ Quick Disconnect Adapter
Asin: B00755E3QA | Model: . | PartNumber: . | Ean: 5055498714262
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 1.10 x 6.90 x 4.80 Inches | Weight: 0.00 pounds
See On Amazon #5
XS Scuba - Valves - Stand Alone Valves - Deluxe K Valve - Scuba and Snorkel Diving
Asin: B000COHD54 | Ean: 0687965626683 | UPC: 687965626683
Service Pressure: 3000 Psi.
Air Service.
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 1.90 x 4.10 x 4.00 inches | Weight: 0.00 pounds
See On Amazon #6
XS Scuba Aluminum 3000 psi Cylinders Pro Valve
Asin: B0043WKO66
Clean For Pre-Blended Nitrox Up To 40% Oxygen.
Available In 3 Service Pressures.
1.5 Handwheel Rotations From Fully On To Fully Off.
3/4”-14 Npsm Standard Inlet Threads.
Features
- Standard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet
- 3/4 -14 NPSM standard inlet threads
- Clean for pre-blended Nitrox up to 40% oxygen
- 1.5 handwheel rotations from fully on to fully off
- Available in 3 service pressures
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Weight: 3.00 pounds
See On Amazon #7
XS Scuba DIN Valve
Asin: B007YBIK2I
7/8”-14 Unf Standard Inlet Threads.
Can Be Used On 3500 Psi Old Hp Steel Cylinders (Must Change Safety).
1.5 Handwheel Rotations From Fully On To Fully Off.
Attachment Of Din First Stages Only. Air Service Only.
Features
- Dedicated 300 bar DIN outlet
- Attachment of DIN first stages only. Air service only
- 7/8 -14 UNF standard inlet threads
- 1.5 handwheel rotations from fully on to fully off
- Can be used on 3500 psi old HP steel cylinders (must change safety)
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 1.70 x 4.30 x 3.70 inches | Weight: 3.00 pounds
See On Amazon #8
XS Scuba Thermo Pro K 3442 PSI Scuba Tank Valve
Asin: B003JPD8GQ | Ean: 0686910476724 | UPC: 686910476724
Clean For Pre-Blended Nitrox Up To 40% Oxygen.
3/4”-14 Npsm Standard Inlet Threads.
Features
- Standard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet
- 3/4 -14 NPSM standard inlet threads
- Clean for pre-blended Nitrox up to 40% oxygen
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 1.14 x 4.50 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #9
XS Scuba Thermo Din/Yoke Valve Pro 3000 PSI EANX
Asin: B000T68H28 | Ean: 0110043436572 | UPC: 110043436572
Clean For Pre-Blended Nitrox Up To 40% Oxygen.
3/4”-14 Npsm Standard Inlet Threads.
Features
- Standard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet
- 3/4 -14 NPSM standard inlet threads
- Clean for pre-blended Nitrox up to 40% oxygen
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 1.80 x 4.30 x 2.20 Inches | Weight: 1.55 Pounds
See On Amazon #10
XS Scuba Highland Deluxe Inline Shut-Off
Asin: B007YBIIQQ
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 0.20 x 4.00 x 2.50 Inches | Weight: 0.05 Pounds
See On Amazon #11
XS Scuba PVD Pro Valve0
Asin: B007YBIRVM
3/4”-14 Npsm Standard Inlet Threads.
3442 Psi.
Clean For Pre-Blended Nitrox Up To 40% Oxygen. 1.5 Handwheel Rotations From Fully On To Fully Off.
Standard Yoke Outlet With Spin-Out Din Insert Converts To 230 Bar Din Outlet.
Features
- Mil-Spec black PVD finish
- Standard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet
- 3/4 -14 NPSM standard inlet threads
- Clean for pre-blended Nitrox up to 40% oxygen. 1.5 handwheel rotations from fully on to fully off
- 3442 psi
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 1.80 x 4.30 x 4.20 inches
See On Amazon #12
XS Scuba 110 Degree Adapter
Asin: B007YWKUBG | Ean: 0649823894177 | UPC: 649823894177
Used To Improve Regulator Hose Routing.
Chromed Brass Construction With Viton O-Rings. Low Pressure Use Only – Below 200 Psi.
Often Used To Set Up Underarm Routing Of Primary Regulator Hose.
Increase Comfort And Reduce Jaw Fatigue.
Features
- Installs between low pressure regulator hose and second stage
- Increase comfort and reduce jaw fatigue
- Used to improve regulator hose routing
- Often used to set up underarm routing of primary regulator hose
- Chromed brass construction with Viton o-rings. Low pressure use only below 200 psi
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 0.30 x 3.70 x 2.90 inches
See On Amazon #13
XS Scuba Combo Filler
Asin: B00YIG8HK2 | Model: AC975 | PartNumber: AC975 | Ean: 0649823898243 | UPC: 649823898243
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 1.30 x 3.90 x 5.10 inches
See On Amazon #14
XS Scuba Over Pressure Valve (OPV) Complete Assembly
Asin: B00BFM8KZ4 | Ean: 0110043435223 | UPC: 110043435223
Great Addition To Your Save-A-Dive Kit..
Made From Durable Non-Corrosive Plastic..
Features
- Comes in both 2" Diameters.
- Made from durable non-corrosive plastic.
- Great addition to your save-a-dive kit.
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XsScuba
Dimensions: 0.40 x 2.60 x 3.90 inches | Weight: 0.05 Pounds
See On Amazon #15
XS Scuba PVD Pro Valve - Aluminum Cylinders 3000 Psi
Asin: B007YBIRC6
3/4”-14 Npsm Standard Inlet Threads.
3000 Psi.
Clean For Pre-Blended Nitrox Up To 40% Oxygen. 1.5 Handwheel Rotations From Fully On To Fully Off.
Standard Yoke Outlet With Spin-Out Din Insert Converts To 230 Bar Din Outlet.
Features
- Mil-Spec black PVD finish
- Standard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet
- 3/4 -14 NPSM standard inlet threads
- Clean for pre-blended Nitrox up to 40% oxygen. 1.5 handwheel rotations from fully on to fully off
- 3000 psi
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 1.40 x 4.10 x 3.70 inches | Weight: 1.50 Pounds
See On Amazon #16
XS Scuba Pro Valve with 1/2" NPT Threads
Asin: B007YBITFG
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 1.60 x 4.60 x 3.40 inches | Weight: 0.00 pounds
See On Amazon #17
Xs Scuba Scubapro, Air 2, Ss1, Tusa Duo Air Qd Adapter
Asin: B003KYAKFI | Model: SG_B003KYAKFI_US | PartNumber: SG_B003KYAKFI_US | Ean: 0687965626812 | UPC: 687965626812
Chromed Brass Construction With Viton O-Rings.
Compatible With: Scubapro Air 2, Tusa Duo Air, Atomic Ss1, Sherwood Gemini, Zeagle Octo-Z.
Low Pressure Use Only - Below 200 Psi.
Installs To The Second Stage End Of A Regulator Hose.
Features
- Convert any standard regulator hose to a ScubaPro Style QD hose
- Installs to the second stage end of a regulator hose
- Chromed brass construction with Viton o-rings
- Low pressure use only - below 200 psi
- Compatible with: ScubaPro Air 2, Tusa Duo Air, Atomic SS1, Sherwood Gemini, Zeagle Octo-Z
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 0.60 x 5.70 x 2.80 inches | Weight: 0.20 Pounds
See On Amazon #18
XS Scuba Modular Pro Valve - 3000 Psi - Left Hand Orientation
Asin: B007Z8IPDO | Ean: 0649823899370 | UPC: 649823899370
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 1.70 x 4.10 x 4.10 inches | Weight: 3.00 pounds
See On Amazon #19
XS Scuba Deluxe Fill Checker
Asin: B000T02HTS | Ean: 0649823894214 | UPC: 649823894214
Dual Scale: 0 To 5000 Psi And 0 To 350 Bar.
Positive Seal Pdvf Seat.
Easy Replacement Bleed Screw.
Custom Silicone Gauge Boot Included To Protect The Gauge From Mild Impact.
Stainless Steel Twist Bleed Screw.
Stainless Steel Case.
Easy Read 2.75 In (69.8 Mm) Diameter Gauge.
Features
- Attaches to all K, PRO and DIN valves with Spin-On Yoke Adapter (Included)
- Easy read 2.75 in (69.8 mm) diameter gauge
- Dual scale: 0 to 5000 psi and 0 to 350 bar
- Stainless steel case
- Custom silicone gauge boot included to protect the gauge from mild impact
- Stainless steel twist bleed screw
- Positive seal PDVF seat
- Easy replacement bleed screw
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Weight: 1.00 pounds
See On Amazon #20
XS Scuba First Stage Quick Disconnect
Asin: B07QYWVVWV | Model: AC998 | PartNumber: AC998 | Ean: 0649823893927 | UPC: 649823893927
One End Is Male 3/8”-24, The Other End Is Female 3/8”-24..
Low Pressure Only – Below 200 Psi (14 Bar)..
Chrome Over Brass Construction With Viton O-Ring..
Installs Between First Stage And Regulator Hose..
Features
- Lock-down screw to prevent accidental disconnection.
- Installs between first stage and regulator hose.
- One end is male 3/8 -24, the other end is female 3/8 -24.
- Chrome over brass construction with viton o-ring.
- Low pressure only below 200 psi (14 bar).
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 1.50 x 3.00 x 1.75 inches | Weight: 0.01 pounds
See On Amazon
Looking For Something Else?
Search