Yukon Gear & Axle (PK D44-JK-STD) Pinion Installation Kit for Jeep JK Non-Rubicon Dana 44 Rear Differential
Asin: B0078U9YNY | Model: PK D44-JK-STD | PartNumber: PK D44-JK-STD | Ean: 0883584131007 | UPC: 883584131007
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Included In This Kit Are The Pinion Bearings And Races, Pilot Bearing (If Applicable), Crush Sleeve (If Applicable), Complete Pinion Shim Kit, Pinion Nut, Thread Locker, And Marking Compound With Brush.
Fit Type: Vehicle Specific.
Yukon Does Extensive Research For Each Application To Make Sure Your Kit Will Arrive With All The Correct Parts You Need To Install Your Pinion Gear.
This Kit Uses Timken Bearings And Races Along With A High Quality Pinion Seal And Small Parts.
Features
- yukon pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings and races can be reused
- this kit uses timken bearings and races along with a high quality pinion seal and small parts
- included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush
- yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear
- Fit type: Vehicle Specific
- See more on Amazon...
Brand: Yukon Gear | Manufacturer: Yukon Gear
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 3.50 pounds
Warranty: 1 year warranty against Manufacturer defects
See On Amazon Similar To Yukon Gear Axle PK
#1
Yukon Gear & Axle (PK F8.8-A) Pinion Installation Kit for Ford 8.8 Differential
Asin: B00C5OWC8C | Model: PK F8.8-A | PartNumber: PK F8.8-A | Ean: 0883584130413 | UPC: 883584130413
Included In This Kit Are The Pinion Bearings And Races, Pilot Bearing (If Applicable), Crush Sleeve (If Applicable), Complete Pinion Shim Kit, Pinion Nut, Thread Locker, And Marking Compound With Brush.
Fit Type: Vehicle Specific.
Yukon Does Extensive Research For Each Application To Make Sure Your Kit Will Arrive With All The Correct Parts You Need To Install Your Pinion Gear.
This Kit Uses Timken Bearings And Races Along With A High Quality Pinion Seal And Small Parts.
Features
- yukon pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings and races can be reused
- this kit uses timken bearings and races along with a high quality pinion seal and small parts
- included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush
- yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear
- Fit type: Vehicle Specific
- See more on Amazon...
Brand: Yukon Gear & Axle | Manufacturer: Yukon Gear
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 3.10 pounds
Warranty: 1 year warranty against Manufacturer defects
See On Amazon #2
USA Standard Gear ZK C9.25ZF Master Differential Rebuild Kits
Asin: B01D44O0RC | Model: ZK C9.25ZF | PartNumber: ZK C9.25ZF | Ean: 0883584371168 | UPC: 883584371168
Included Are Carrier Bearings And Races, Pinion Bearings And Races, Pinion Seal, Complete Shim Kit, Ring Gear Bolts, Pinion Nut, Crush Sleeve, Thread Locker, Marking Compound With Brush And Gasket.
Item Model Number : Sp121-6 Pk.
Fits 2011 And Up Chrysler 9. 25" Zf Rear Axles.
Features
- Uses Koyo bearings and races
- Fits 2011 and up Chrysler 9. 25 ZF rear axles
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket
- Item model number : SP121-6 PK
- See more on Amazon...
First Available: 02/28/2019
Brand: USA Standard Gear | Manufacturer: USA Standard Gear
Dimensions: 4.00 x 13.00 x 13.00 inches | Weight: 7.38 pounds
Warranty: 1 year warranty against Manufacturer defects
See On Amazon #3
Yukon Gear & Axle (YGK035) Gear & Install Kit for GM 14T Dana 60 4.56 Thick '99+ Standard Rotation
Asin: B00HSIVBI2 | Model: YGK035 | PartNumber: YGK035 | Ean: 0883584310358 | UPC: 883584310358
Matching Gears (Thick) In A 4.56 Ratio.
Yukon Gear And Install Kit Package For Standard Rotation Dana 60 And ’99 And Up Gm 14-Bolt Truck, 4.56 Thick.
This Is A Complete Package That Includes Front And Rear Ring And Pinion Sets Along With The Most Complete Master Overhaul Kits On The Market, Giving You Everything You Need To Re-Gear The Front And Rear Differential In One Easy Part Number.
1 Year Warranty.
Fit Type: Vehicle Specific.
Fits 1999 And Newer Gm 14 Bolt Truck.
This Is A Complete Package That Includes Front And Rear Ring And Pinion Sets Along With The Most Complete Master Overhaul Kits On The Market, Giving You Everything You Need To Re-Gear The Front And Rear Differential In One Easy Part Number.
Includes Front/Rear Differential Rebuild Kits.
Features
- Includes Front/Rear Ring Pinion Gear Sets
- Includes Front/Rear Differential Rebuild Kits
- Matching Gears (Thick) in a 4.56 Ratio
- Fits 1999 and Newer GM 14 Bolt Truck
- 1 Year Warranty
- Fit type: Vehicle Specific
- Yukon Gear and Install Kit package for Standard Rotation Dana 60 and 99 and up GM 14-bolt truck, 4.56 thick
- This is a complete package that includes front and rear ring and pinion sets along with the most complete master overhaul kits on the market, giving you everything you need to re-gear the front and rear differential in one easy part number
- This is a complete package that includes front and rear ring and pinion sets along with the most complete master overhaul kits on the market, giving you everything you need to re-gear the front and rear differential in one easy part number
- See more on Amazon...
Brand: Yukon Gear & Axle | Manufacturer: Yukon
Dimensions: 20.00 x 19.00 x 16.00 inches | Weight: 0.00 pounds
Warranty: 1 year warranty against Manufacturer defects
See On Amazon #4
Yukon Gear & Axle (YY GM15579602) Yoke for GM 9.5 Differential with a 1350 U/joint size. 3.625" snap ring span, 1.188" cap diameter.
Asin: B0078U8WPA | Model: YY GM15579602 | PartNumber: YY GM15579602 | Ean: 0883584410775 | UPC: 883584410775
Precision Machined Yoke.
Brand: Yukon Gear | Manufacturer: Yukon Gear
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 3.34 pounds
See On Amazon #5
Yukon Gear & Axle (YT SB-D44) Set-Up Carrier Bearing (2 Bearings, No Races) 25590.
Asin: B00EHKM5ES | Model: YT SB-D44 | PartNumber: YT SB-D44 | Ean: 0883584560371 | UPC: 883584560371
Easily Slips On And Off Carrier Journals To Allow For Easier Carrier Shim Adjustment.
Designed For Specific Applications.
Features
- For Use in Differential Applications
- Designed for Specific Applications
- Easily slips on and off carrier journals to allow for easier carrier shim adjustment
- See more on Amazon...
Brand: Yukon Gear & Axle | Manufacturer: Yukon Gear
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 1.53 Pounds
Warranty: Warranty
See On Amazon #6
Yukon Gear & Axle Yukon (YSPTW-048) Standard Open Side Gear Thrust Washer for GM 8.6" Differential
Asin: B00EHKKXA6 | Model: YSPTW-048 | PartNumber: YSPTW-048 | Ean: 0883584333869 | UPC: 883584333869
Engineered To Fit Specific Differential Applications.
High Quality Small Parts.
Features
- 1 Year Warranty
- High Quality Small Parts
- Engineered to Fit Specific Differential Applications
- See more on Amazon...
Brand: Yukon Gear & Axle | Manufacturer: Yukon Gear
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.03 pounds
See On Amazon #7
Yukon Gear & Axle Yukon Axle Bolt for GM 10.5" 14 Bolt Truck And 11.5" AAM
Asin: B07KQ2Z4VF | Model: YSPBLT-085 | PartNumber: YSPBLT-085 | Ean: 0883584335832 | UPC: 883584335832
Item Package Quantity - 1.
Axle Bolts.
Product Type - Bolts.
Item Package Weight - 0.13 Pounds.
Features
- Item Package Dimension: 4.17L x 3.82W x 0.75H inches
- Item Package Weight - 0.13 Pounds
- Item Package Quantity - 1
- Product Type - BOLTS
- Axle Bolts
- See more on Amazon...
First Available: 02/28/2019
Brand: Yukon Gear & Axle | Manufacturer: Yukon Gear & Axle
Dimensions: 1.00 x 1.00 x 1.00 inches
Warranty: 1 year warranty against Manufacturer defects
See On Amazon #8
Yukon Gear YA G14035395) 1541H Alloy 8-Lug Rear Axle for GM G30/Truck 9.5" Differential
Asin: B0078UBDA6 | Model: YA G14035395 | PartNumber: YA G14035395 | Ean: 0883584212522 | UPC: 883584212522
Yukon 1541H Alloy Rear Axles Come With A One Year Warranty Against Manufacturing Defects.
This Is A C-Clip Axle.
Yukon 1541H Alloy Axles Offer A Strength Increase Over Stock While Retaining A Low Cost.
Features
- Yukon 1541H alloy 8 lug rear axle for GM 9.5" '81-'95 truck and '83-'96 G30 with a length of 32-3/4" and 33 splines
- Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost
- Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects
- This is a C-clip axle
- See more on Amazon...
Brand: Yukon Gear | Manufacturer: Yukon Gear
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 27.30 Pounds
See On Amazon #9
Yukon Gear Yukon (YA G3893605) 1541H Alloy 6-Lug Rear Axle for GM 12-Bolt Truck Differential
Asin: B0078U9VMI | Model: YA G3893605 | PartNumber: YA G3893605 | Ean: 0883584212843 | UPC: 883584212843
Yukon 1541H Alloy Axles Offer A Strength Increase Over Stock While Retaining A Low Cost.
This Is A C-Clip.
Yukon 1541H Alloy Rear Axles Come With A Five Year Warranty Against Manufacturing Defects.
Fits 17Sp Housing.
Features
- Yukon 1541H alloy 6 lug rear axle for '63-'72 GM 12-Bolt truck with a length of 30-3/4" and 30 splines
- Fits 17SP housing
- Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost
- Yukon 1541H alloy rear axles come with a five year warranty against manufacturing defects
- This is a C-clip
- See more on Amazon...
Brand: Yukon Gear | Manufacturer: Yukon
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 17.12 Pounds
Warranty: Warranty
See On Amazon #10
Yukon Gear Yukon (YA G12479336) 1541H Alloy Rear Right Axle for GM 8" Differential
Asin: B0078UBCMU | Model: YA G12479336 | PartNumber: YA G12479336 | Ean: 0883584215745 | UPC: 883584215745
1541H High Alloy Steel Provides Higher Strength Than Stock Axles.
Replacement Axle.
Features
- 10 Year Warranty
- Replacement Axle
- 1541H High Alloy Steel Provides Higher Strength than Stock Axles
- See more on Amazon...
Brand: Yukon Gear | Manufacturer: Yukon
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 17.55 Pounds
Warranty: Warranty
See On Amazon #11
Yukon Gear & Axle (YA G26058925) Rear Axle for GM 2WD S10/Blazer 8.5 Differential 1541H Alloy
Asin: B0078U9TXY | Model: YA G26058925 | PartNumber: YA G26058925 | Ean: 0883584216209 | UPC: 883584216209
Yukon 1541H Alloy Rear Axles Come With A One Year Warranty Against Manufacturing Defects.
Yukon 1541H Alloy Axles Offer A Strength Increase Over Stock While Retaining A Low Cost.
Features
- Yukon 1541H alloy rear axle for GM 8.5" for '98-'03 2WD S10 Blazer with a length of 26-1/1" and 30 splines
- Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost
- Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects
- See more on Amazon...
Brand: Yukon Gear | Manufacturer: Yukon Gear
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 14.04 pounds
Warranty: Warranty
See On Amazon #12
Yukon Gear & Axle (YG GM9.5-456) Ring & Pinion Gear Set GM 9.5)
Asin: B0078U8LAQ | Model: YG GM9.5-456 | PartNumber: YG GM9.5-456 | Ean: 0883584241683 | UPC: 883584241683
Yukon Uses The Latest Designs And Manufacturing Technologies To Provide A Quiet Running Gear That Is Strong And Easy To Set Up.
This Product Is Used In A 4.56 Ratio.
All Yukon Ring And Pinion Sets Come Standard With A One-Year Warranty.
Whether It’S On The Street, Off-Road, Or At The Track; Yukon Ring And Pinion Sets Deliver Unrivaled Performance And Quality.
Features
- Yukon Ring and Pinion sets give you the confidence of knowing you re running gears designed for the harshest of conditions
- Whether it s on the street, off-road, or at the track; Yukon ring and pinion sets deliver unrivaled performance and quality
- Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up
- All Yukon ring and pinion sets come standard with a one-year warranty
- This product is used in a 4.56 ratio
- See more on Amazon...
First Available: 06/21/2016
Brand: Yukon Gear & Axle | Manufacturer: Yukon Gear
Dimensions: 11.30 x 15.50 x 5.40 inches | Weight: 19.00 pounds
Warranty: Warranty
See On Amazon #13
Yukon Gear & Axle GM 9.5" & 9.76" Carrier Installation Kit
Asin: B01N0H4LKZ | Model: CK GM9.5 | PartNumber: CK GM9.5 | Ean: 0883584570158 | UPC: 883584570158
Fit Type: Vehicle Specific.
Package Weight: 8.49 Pounds.
Part Number: Ck Gm9.5.
First Available: 02/28/2019
Brand: Yukon Gear & Axle | Manufacturer: Yukon Gear & Axle
Dimensions: 6.00 x 12.00 x 13.00 inches
Warranty: 1 year warranty against Manufacturer defects
See On Amazon #14
Yukon Gear YA G26010415) 1541H Alloy Rear Axle for GM 2WD 8.5" Differential
Asin: B0078U9PJM | Model: YA G26010415 | PartNumber: YA G26010415 | Ean: 0883584212676 | UPC: 883584212676
Yukon 1541H Alloy Rear Axles Come With A One Year Warranty Against Manufacturing Defects.
This Is A C-Clip Axle.
Yukon 1541H Alloy Axles Offer A Strength Increase Over Stock While Retaining A Low Cost.
Features
- Yukon 1541H alloy rear axle for '88-'91 8.5" GM 2WD 1559 truck with a length of 31-1/2" and 30 splines
- Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost
- Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects
- This is a C-clip axle
- See more on Amazon...
Brand: Yukon Gear | Manufacturer: Yukon Gear
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 18.34 pounds
See On Amazon #15
Yukon Gear & Axle (AK 1561GM) Axle Bearing & Seal Kit for GM 9.5 Differential
Asin: B0078U846M | Model: AK 1561GM | PartNumber: AK 1561GM | Ean: 0883584100034 | UPC: 883584100034
Services One Side Only.Bore Diameter:1.7 Inch.
Includes Installation Guide.
Features
- High Quality Bearings and Seals
- Includes Installation Guide
- Services One Side Only.Bore Diameter:1.7 inch
- See more on Amazon...
Brand: Yukon Gear | Manufacturer: Yukon Gear
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.25 Pounds
Warranty: Warranty
See On Amazon #16
Yukon Gear & Axle (YA G26059972) Rear Axle for GM Camaro 7.5/7.625 Differential 1541H Alloy
Asin: B0078U9UGU | Model: YA G26059972 | PartNumber: YA G26059972 | Ean: 0883584216247 | UPC: 883584216247
Yukon 1541H Alloy Rear Axles Come With A One Year Warranty Against Manufacturing Defects.
This Is A C-Clip Axle.
Yukon 1541H Alloy Axles Offer A Strength Increase Over Stock While Retaining A Low Cost.
Features
- Yukon 1541H alloy rear axle for '98-'02 GM 7.5" and 7.625" Camaro with electronic track control, with a length of 32" and 28 splines
- Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost
- Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects
- This is a C-clip axle
- See more on Amazon...
Brand: Yukon Gear | Manufacturer: Yukon Gear
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 17.82 pounds
Warranty: Warranty
See On Amazon #17
Yukon Gear & Axle (YPKGM8.6-S-30V3) Standard Open Spider Gear Set for GM 8.6 Differential
Asin: B00D61F28A | Model: YPKGM8.6-S-30V3 | PartNumber: YPKGM8.6-S-30V3 | Ean: 0883584161462 | UPC: 883584161462
Includes Two Side Gears, Two Pinion Gears, Cross Pin Shaft, Cross Pin Bolt And Spider Gear Thrust Washers..
Meets Or Exceeds Oem Specifications.
Fits 2007 & Newer Gm 8.6” V3 Carrier Design With Two Large Openings, Casting Number 8064..
Features
- Standard Open Spider Gear Set
- Fits 2007 & Newer GM 8.6 V3 Carrier Design with two large openings, casting number 8064.
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
- Meets or Exceeds OEM Specifications
- See more on Amazon...
Brand: Yukon Gear & Axle | Manufacturer: Yukon Gear
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 4.63 pounds
Warranty: Warranty
See On Amazon #18
Yukon Gear & Axle (YGK030) Gear & Install Kit for GM 14T Dana 60 5.13 Ratio '89-'98 Standard Rotation
Asin: B00HSIV4KC | Model: YGK030 | PartNumber: YGK030 | Ean: 0883584310303 | UPC: 883584310303
Matching Gears In A 5.13 Ratio.
Yukon Gear And Install Kit Package For Standard Rotation Dana 60 And ’89-‘98 Gm 14T, 5.13 Axle Ratio.
This Package Contains A Thick Rear Gear Set And A Standard Thickness Front Gear Set.
1 Year Warranty.
Fit Type: Vehicle Specific.
Fits 1989 -1998 Gm 14 Bolt Truck.
This Is A Complete Package That Includes Front And Rear Ring And Pinion Sets Along With The Most Complete Master Overhaul Kits On The Market, Giving You Everything You Need To Re-Gear The Front And Rear Differential In One Easy Part Number.
Includes Front/Rear Differential Rebuild Kits.
Features
- includes front/rear ring pinion gear sets
- includes front/rear differential rebuild kits
- matching gears in a 5.13 ratio
- fits 1989 -1998 gm 14 bolt truck
- 1 year warranty
- Fit type: Vehicle Specific
- Yukon Gear and Install Kit package for Standard Rotation Dana 60 and 89- 98 GM 14T, 5.13 axle ratio
- This package contains a thick rear gear set and a standard thickness front gear set
- This is a complete package that includes front and rear ring and pinion sets along with the most complete master overhaul kits on the market, giving you everything you need to re-gear the front and rear differential in one easy part number
- See more on Amazon...
Brand: Yukon Gear & Axle | Manufacturer: Yukon
Dimensions: 20.00 x 19.00 x 16.00 inches | Weight: 62.69 pounds
Warranty: 1 year warranty against Manufacturer defects
See On Amazon #19
Yukon Gear & Axle (YP MINSGM12-30) Mini Spool for GM 12-Bolt Car/Truck with 30-Spline Axle
Asin: B0078UBT5K | Model: YP MINSGM12-30 | PartNumber: YP MINSGM12-30 | Ean: 0883584322276 | UPC: 883584322276
Country Of Origin :United States.
We Recommend Full Spools For Vehicles With Large Tires Or High Horsepower.
Package Weight :5.4Lbs.
Package Dimensions :20.32 Cm L X20.32 Cm W X30.48 Cm H.
Features
- Product Type :Auto Part
- Package Dimensions :20.32 Cm L X20.32 Cm W X30.48 Cm H
- Country Of Origin :United States
- Package Weight :5.4Lbs
- We Recommend Full Spools For Vehicles With Large Tires Or High Horsepower
- See more on Amazon...
Brand: Yukon Gear | Manufacturer: Yukon Gear
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 6.00 Pounds
Warranty: Warranty
See On Amazon
Looking For Something Else?
Search