Attwood Outboard Kicker Motor Steering Kit, Silver
Asin: B007G2JA3I | Model: 11663-7 | PartNumber: 11663-7 | Ean: 0022697116635 | UPC: 022697116635
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Cut Connector Rod To Size To Customize Fit.
Tilt Either Motor While Attached.
Quick Disconnect Assemblies Make Attachment And Removal A Breeze.
24" Zinc-Plated Rod Is Durable.
Features
- Steer your kicker motor with your steering wheel by connecting your primary outboard engine to your kicker motor
- 24 zinc-plated rod is durable
- Cut connector rod to size to customize fit
- Quick disconnect assemblies make attachment and removal a breeze
- Tilt either motor while attached
- See more on Amazon...
Brand: Attwood | Manufacturer: ATTWOOD
Dimensions: 1.25 x 26.25 x 7.25 inches | Weight: 1.78 pounds
See On Amazon Similar To Attwood Outboard Kicker Motor Steering
#1
T-H Marine 3003.6276 Marine MSS-1-DP Motor Stik Outboard Motor Support, Silver
Asin: B001F0IJQ6 | Model: 3003.6276 | PartNumber: 3003.6276 | Ean: 0733572067750 | UPC: 733572067750
Takes Pressure Off Of Hydraulic System. Some Yamaha Motors Have A Grease Fitting On The Port Side Ram. Use A Single Motor Stik On The Starboard Side Only In This Application.
Safe For Salt Water And Fresh Water.
Fits Most Outboards Of 150 Hp And Up.Strong Aluminum Tubing With Molded Ends.
Supports Your Outboard While Trailering.
Features
- Fits over trim rams
- Supports your outboard while trailering
- Takes pressure off of hydraulic system. Some Yamaha motors have a grease fitting on the port side ram. Use a single Motor Stik on the starboard side only in this application
- Fits most outboards of 150 HP and up.Strong Aluminum Tubing with Molded Ends
- Safe for salt water and fresh water
- See more on Amazon...
First Available: 06/28/2011
Brand: T-H Marine | Manufacturer: T-H MARINE SUPPLIES LLC-HUNTSVILLE
Dimensions: 1.50 x 13.00 x 5.00 inches | Weight: 0.75 pounds
Warranty: LIMITED WARRANTY
See On Amazon #2
EZYPAK Marine Steer Stop Outboard Hydraulic Steering Lock, for Outboard Engine Transport and Trailering to Prevent Engine Swing and Protect The Steering System, Yellow
Asin: B0CQYL66JZ | Model: vpljq | PartNumber: vpljq
They Operate Best With 3/4" Diameter Steering Shafts, Also Fits 20Mm Diameter Shafts For Ease Of Use And Quick Operation Of The Machine Steering Locks Clamp Onto Hydraulic Steering Gate Plates On Both Outboard Sides To Prevent Damage To The Motor Mounts Keeps The Engine Straight.
If You Have Any Questions, Please Feel Free To Send Us Your Mower Model And Serial Number And We Will Be Happy To Help..
Package Includes A Pair Of Yellow Outboard Hydraulic Steering Lock.
Product Features:Easy To Install And Remove, Made Of Soft Synthetic Material Reduces Scratches On Steering Rod. Compatible With Most Steering Cylinder Rods For Easy Organisation And Storage..
Features
- Helps protect your boat from rocking side to side reduces unnecessary movement while towing Protect your outboard motor from rocking during transport or motor movement reduces swing protects the steering system.
- Product Features:Easy to install and remove, made of soft synthetic material Reduces scratches on steering rod. Compatible with most steering cylinder rods for easy organisation and storage.
- They operate best with 3/4 diameter steering shafts, also fits 20mm diameter shafts For ease of use and quick operation of the machine Steering locks clamp onto hydraulic steering gate plates on both outboard sides to prevent damage to the motor mounts Keeps the engine straight
- Package includes a pair of yellow Outboard Hydraulic Steering Lock
- If you have any questions, please feel free to send us your mower model and serial number and we will be happy to help.
- See more on Amazon...
Brand: EZYPAK | Manufacturer: EZYPAK
Warranty: NO
See On Amazon #3
DotLine Adjustable Outboard Motor Tilter
Asin: B0000AZ878 | Model: 1250 | PartNumber: 1250 | Ean: 0029027012506 | UPC: 029027012506
Heavy-Duty Stainless Steel Arm Adjusts To Fit Shrouds Of Motors Up To 75 Hp With Handholds At The Top Of The Shroud.
Will Not Work On Motors With Handholds That Are Not At The Top Of The Shroud Or Are Not Flat.
Cast Aluminum Body And Legs With Protective Cushions And Hand Grips.
For Outboard Motors Without Power Tilt.
Features
- Assists in tilting the motor back with less strain
- For outboard motors without power tilt
- Heavy-duty stainless steel arm adjusts to fit shrouds of motors up to 75 hp with handholds at the TOP of the shroud
- Cast aluminum body and legs with protective cushions and hand grips
- Will not work on motors with handholds that are not at the top of the shroud or are not flat
- See more on Amazon...
Brand: Dotline | Manufacturer: Drifter Marine
Dimensions: 22.00 x 6.00 x 6.00 Inches | Weight: 3.00 pounds
See On Amazon #4
Mojiate Made Outboard Steering System 13' Boat Steering Cable 13 Feet Marine Steering System 3/4'' Shaft with stainless steel 13.5 Inch Wheel for Yachts and Waterborne Vehicles
Asin: B0C9MCTYZ1 | Model: 9103-set-13 | PartNumber: 9103-set-13
【Flexible Screw】 It Can Be Adjusted According To Customer's Own Needs. It Can Suits Many Types Of People..
【Steering Wheel】Steering Wheel With Hub , Center Cap With Knob,13.5" Size..
【Complete Accessories】Rotary Helm, 13' Steering Cable, Hardware, 90 Degree Bezel Kit, Standard 3/4'' Tapered Steering Shaft..
【Durable Material】Made Of Cast Steel And 304 Stainless Steel Seamless Pipe And Corrosion-Resistant Materials，Durable And Steady..
Features
- Rotary Steering System The boat steering systems have excellent performance and can make the ship steering more precise.
- Durable Material Made of cast steel and 304 stainless steel seamless pipe and corrosion-resistant materials durable and steady.
- Flexible Screw It can be adjusted according to customer's own needs. It can suits many types of people.
- Complete Accessories Rotary Helm, 13' Steering Cable, Hardware, 90 Degree Bezel Kit, Standard 3/4'' tapered steering shaft.
- Steering Wheel Steering wheel with hub , center cap with Knob,13.5 Size.
- See more on Amazon...
Brand: Mojiate | Manufacturer: mojiate
Dimensions: 21.26 x 6.30 x 18.11 Inches
See On Amazon #5
VEVOR Outboard Hydraulic Steering Pump Helm 300 HP Hydraulic Pump HH5271-3 for Cruisers Runabouts Boats
Asin: B0C2PYFJH5 | Model: HH5271-3 Hydraulic Steering Pump | PartNumber: HH5271-3 Hydraulic Steering Pump | Ean: 0840349940939 | UPC: 840349940939
Shaft Seal & Orb Fitting: The Pump Has A Shaft Seal That Can Be Easily Replaced, This Is A User-Friendly Design For Your Use. And The Positionable Stainless Steel O-Ring (Orb) Fittings For Easy Hose Routing..
Sturdy Aluminum Alloy: The Hydraulic Steering Helm Is Made From A High-Strength Aluminum Alloy Material, Which Is Corrosion-Resistant, And High-Density To Effectively Prevent Seawater Erosion. Constant Seasonal Replacements Will No Longer Be A Worry. Enjoy The Steering Helm For Years To Come..
Built-In Two-Way Lock: The Hydraulic Helm Pump Is Equipped With The Replaceable Shaft Seal, Built-In Lock Valve, Relieve Valve, And Air Pocket. These Details Make It Convenient For You To Use..
1.7 Hydraulic Helm: Our Hh5271-3 Front Mount 1.7 Hydraulic Helm Provides Smooth And Efficient No Feedback Steering For Single And Multi-Outboard Engines Up To 300 Hp (600 Hp Combined For Counter Rotating Twins) For Speeds Up To 60 Mph. 4.9 Turns Lock-To-Lock In Most Typical Single Cylinder Outboard Applications..
Features
- HH5271-3 Front Mount Pump: This helm is ideal for cruisers, runabouts, center console boats, offshore fishing boats and many more. It is also suitable for speeds up to 60 MPH. The helm allows you to install all of the reliability and comfort of hydraulic steering onto your boat. Get ready to take your boat to the next level.
- 1.7 Hydraulic Helm: Our HH5271-3 front mount 1.7 hydraulic helm provides smooth and efficient no feedback steering for single and multi-outboard engines up to 300 HP (600 HP combined for counter rotating twins) for speeds up to 60 MPH. 4.9 turns lock-to-lock in most typical single cylinder outboard applications.
- Shaft Seal & ORB Fitting: The pump has a shaft seal that can be easily replaced, this is a user-friendly design for your use. And the positionable stainless steel O-Ring (ORB) fittings for easy hose routing.
- Built-in Two-way Lock: The hydraulic helm pump is equipped with the replaceable shaft seal, built-in lock valve, relieve valve, and air pocket. These details make it convenient for you to use.
- Sturdy Aluminum Alloy: The hydraulic steering helm is made from a high-strength aluminum alloy material, which is corrosion-resistant, and high-density to effectively prevent seawater erosion. Constant seasonal replacements will no longer be a worry. Enjoy the steering helm for years to come.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 8.00 x 4.30 x 4.30 inches | Weight: 6.70 pounds
See On Amazon #6
Winibo ZA0300 Boat Hydraulic Steering System For Outboard up to 150HP With Helm Steering Ram, Cylinder, Tube kits
Asin: B074C1SNHH | Model: ZA0300 | PartNumber: ZA0300 | Ean: 0607467270993 | UPC: 607467270993
Compatible With Such Brands As Yamaha, Suzuki, Honda, Mercury, Nissan, Tohatsu And More.
24 Feet Of Quality Hydraulic Hose, Top Mounted Pump, And A ¾” Tapered Steering Wheel Shaft Guarantee A Professional Installation On Most Boats.
Hydraulic Steering Kit Built In High Class Stainless Steel For Years Of Trouble Free Use.
Universally Designed For Outboards Rated Up To 150 Total Horsepower.
Features
- Helm Mounted Hydraulic Steering systems for Boats
- Universally Designed for outboards rated up to 150 total Horsepower
- Compatible with such brands as Yamaha, Suzuki, Honda, Mercury, Nissan, Tohatsu and more
- Hydraulic Steering kit built in High class Stainless Steel For Years of trouble free use
- 24 feet of quality Hydraulic hose, Top mounted pump, and a tapered steering wheel shaft guarantee a professional installation on most boats
- See more on Amazon...
Brand: Winibo | Manufacturer: Woqi
Weight: 16.98 pounds
See On Amazon #7
VEVOR Hydraulic Steering for Boats, 300HP Outboard Steering System Kit with Helm Pump, Cylinder, Steering Wheel and Hose
Asin: B089VSZRRK | Model: HK6318A-3 | PartNumber: HK6318A-3 | Ean: 0768558098343 | UPC: 768558098343
【Aluminum Alloy Casing】- Our Hydraulic Steering Kit For Boats Features High-Strength Aluminum Alloy Casing Ensuring Wear Resistance And Corrosion Resistance, And Effectively Prevent Seawater Erosion..
【Wide Application】- These Boat Steering Parts Are Suitable For Ships Under 300Hp Horsepower, Outboard-Powered Boats Like The Center Console, Offshore Fishing, Bass Boats, Flats Boats, And Many More..
【Compact & Neat】- The Hydraulic Pump Has A Compact Internal Structure And A Stylish Exterior. The Hydraulic Pump Of Our Boat Steering System For Boats Rated To A Maximum Of 300 Hp..
【Excellent Nylon Hose】- High-Strength Nylon Hose In This Hydraulic Outboard Steering Kit With Quick-Fit 1/4 Pipe Will Fit For Easy Installation And Multiple Re-Uses..
Features
- 13.5'' STEERING WHEEL - Made of aluminum alloy and high-quality plastic. This boat hydraulic steering kit is anti-aging, corrosion-resistant, and high-density. The anti-slip wave design can make your operation more comfortable.
- EXCELLENT NYLON HOSE - High-strength nylon hose in this hydraulic outboard steering kit with quick-fit 1/4 pipe will fit for easy installation and multiple re-uses.
- ALUMINUM ALLOY CASING - Our hydraulic steering kit for boats features high-strength aluminum alloy casing ensuring wear resistance and corrosion resistance, and effectively prevent seawater erosion.
- COMPACT & NEAT - The hydraulic pump has a compact internal structure and a stylish exterior. The hydraulic pump of our boat steering system for boats rated to a maximum of 300 HP.
- WIDE APPLICATION - These boat steering parts are suitable for ships under 300HP horsepower, outboard-powered boats like the center console, offshore fishing, bass boats, flats boats, and many more.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 7.50 x 24.80 x 18.90 inches | Weight: 22.00 Pounds
See On Amazon #8
Seachoice Steering Guard, 7/8 in. Thread, for Honda, Mercury, Mariner, Johnson, Evinrude, Nissan, Suzuki, Tohatsu, Yamaha and Force
Asin: B0006ZCHJQ | Model: 28251 | PartNumber: 28251 | Ean: 0719249282510 | UPC: 719249282510
Will More Than Double The Life Of A New Cable System.
Fits Honda, Mercury, Mariner, Johnson, Evinrude, Nissan, Suzuki, Tohatsu, Yamaha And Force With 7/8-Inch Thread.
Stainless Steel Provides Excellent Corrosion Resistance.
Installs In Only 10 Minutes.
Eliminates Greasy Steering Rods Forever.
Lubricates, Cleans, And Seals The System.
Features
- Designed for installation on all cable and side-mount hydraulic steering systems
- Lubricates, cleans, and seals the system
- Will more than double the life of a new cable system
- Eliminates greasy steering rods forever
- Stainless steel provides excellent corrosion resistance
- Installs in only 10 minutes
- Fits Honda, Mercury, Mariner, Johnson, Evinrude, Nissan, Suzuki, Tohatsu, Yamaha and Force with 7/8-inch thread
- See more on Amazon...
Brand: SEACHOICE | Manufacturer: Seachoice
Dimensions: 5.00 x 3.75 x 1.00 inches | Weight: 0.24 Pounds
Warranty: http://www.seachoice.com/warranty-information
See On Amazon #9
Outboard Steering System,Marine Turbine Rotary Steering System Outboard Boat Steering Kit with 13.5" Steering Wheel and Steering Cable Rotary Helm 3/4" Tapered Shaft 90 Bezel Fixing Kits (12FT)
Asin: B092ZCQ8DQ | Model: SS13712 | PartNumber: SS13712 | Ean: 1272539123959
【Simple Installation】- With Complete Accessories And Instruction, The Marine Steering Kit Is Easy And Quick To Assemble As You Don't Have To Configure The Parts Separately. Besides, A Simple Snap-In Cable Connection And Different Mounting Hardware Are Provided To Ensure Fast Installation..
【Wide Application】- Designed And Developed Especially For Marine Use.This Outboard Steering Kit Is Suitable For Mechanical/Manual Steering For Yachts, Fishing Boats,Electric Push Boats And Other Waterborne Vehicles.Widely Used For Boats Up To 24' And Steering Wheels Up To 16"..
【Labor-Saving】This Boat Steering System Is Designed To Minimize The Effort On You To Steer The Boat And Allowing The Boat To Steer Accurately, To Make Sure That You Have A Pleasant Boating Experience Every Time You Use It..
【Complete Accessories】- It Comes With A 13.5" Steering Wheel,Rotary Helm,Standard 3/4" Tapered Steering Shaft;12 Ft Steering Cable, Hardware, 90 Degree Bezel Kit..
Features
- PREMIUM MATERIAL - Made of cast steel and 304 stainless steel seamless pipe and corrosion-resistant materials, this steering kit is durable and steady. The rotary helm is well welded and polished with a moderate size. The cable is made of stainless steel and premium rubber to ensures the surface from corrosion, rust, cracking, and leakage and maintains the fittings' gloss.
- COMPLETE ACCESSORIES - It comes with a 13.5 steering wheel,Rotary Helm,Standard 3/4 tapered steering shaft;12 FT Steering Cable, Hardware, 90 Degree Bezel Kit.
- SIMPLE INSTALLATION - With complete accessories and instruction, the marine steering kit is easy and quick to assemble as you don't have to configure the parts separately. Besides, a simple snap-in cable connection and different mounting hardware are provided to ensure fast installation.
- Labor-saving This boat steering system is designed to minimize the effort on you to steer the boat and allowing the boat to steer accurately, to make sure that you have a pleasant boating experience every time you use it.
- WIDE APPLICATION - Designed and developed especially for marine use.This outboard steering kit is Suitable for mechanical/manual steering for yachts, fishing boats,electric push boats and other waterborne vehicles.Widely used for boats up to 24' and steering wheels up to 16.
- See more on Amazon...
Brand: Generic | Manufacturer: Newmaix
Weight: 13.01 pounds
See On Amazon #10
Winibo ZA0301 Marine Outboard Hydraulic Steering System for Boats with Helm Pump, Hydraulic Cylinder and Tubing
Asin: B074C8ZZBC | Model: ZA0301 | PartNumber: ZA0301 | Ean: 0607467270986 | UPC: 607467270986
Compatible With Such Brands As Yamaha, Suzuki, Honda, Mercury, Nissan, Tohatsu And More!.
24 Foot Of Quality Hydraulic Hose, Top Mounted Pump, And A ¾” Tapered Steering Wheel Shaft, Guarantee A Professional Installation On Most Boats!.
Our Kit Is Made Of High Quality Stainless Steel And Aluminum Alloy For Years Of Trouble Free Use!.
Universally Designed For Outboards Rated Up To 90 Total Horsepower!.
Features
- Make your boat steer better than new! Helm Mounted Hydraulic Steering systems for Boats
- Universally Designed for outboards rated up to 90 total Horsepower!
- Compatible with such brands as Yamaha, Suzuki, Honda, Mercury, Nissan, Tohatsu and more!
- Our kit is made of high quality stainless steel and Aluminum alloy for years of trouble free use!
- 24 Foot of quality Hydraulic hose, Top mounted pump, and a tapered steering wheel shaft, guarantee a professional installation on most boats!
- See more on Amazon...
Brand: Winibo | Manufacturer: Woqi
Dimensions: 19.00 x 60.00 x 29.00 Centimeters | Weight: 11.02 pounds
See On Amazon #11
Boat Engine Stainless Steel Steering Tie Rod Drag Link Kit 315-395mm / 12.4-15.55in Adjustable, Include Steering Hook
Asin: B09N94FCY7
Size 315-395Mm / 12.4-15.55In Adjustable.
For Many Outboard Engine Use From 15Hp Up To 200Hp.
Outboard Steering Link Rod, Include Steering Hook.
Features
- STAINLESS STEEL
- OUTBOARD STEERING LINK ROD, include Steering hook
- Size 315-395mm / 12.4-15.55in Adjustable
- For Many Outboard Engine Use from 15HP up to 200HP
- See more on Amazon...
Brand: SouthMarine | Manufacturer: SouthMarine
See On Amazon #12
4" Steer Stop Outboard Hydraulic Steering Lock for Outboard Motor - (Come with a Pair of 4" Length Clips) Fits Most Steering Cylinder Rods On Outboard Engines (1)
Asin: B0CDNYT3WD | Model: VP-10 | PartNumber: VP-10
Simple To Take On And Off: Simply Snaps Units Over Outboards Hydraulic Steering Cylinder Rods With One On Each Side And You Are Ready To Hit The Road..
Hassle Free Return: We Aim To Provide Customers With Best Service. You Are Always Welcome To Contact Our Staff If You Have Any Questions. We Will Reply Within 24 Hours..
Works Great, Stopped Motor Wiggle While Trailering On Roadway. Saves Seals In Hydraulic Steering.
Made From Soft Synthetic Materials. They Won't Scratch Your Steering Rods And They Are Temperature Stable..
Package List: Package Comes With 4’’ Steer Stop Outboard Hydraulic Steering Lock, Also Includes Cord To Connect Units For Storage And To Aid In Removal.
Function: Helps Keep Engine Centered During Transport, Protects Steering System, Outboard, And Motor Supports. Small Accessory, Big Function.
Features
- Hydraulic Steering Lock - Great compatibility: fits most steering cylinder rods on outboard engines
- Function: Helps keep engine centered during transport, protects steering system, outboard, and motor supports. Small accessory, big function
- Simple to take on and off: simply snaps units over outboards hydraulic steering cylinder rods with one on each side and you are ready to hit the road.
- Package list: Package comes with 4 Steer Stop Outboard Hydraulic Steering Lock, also includes cord to connect units for storage and to aid in removal
- Works great, stopped motor wiggle while trailering on roadway. Saves seals in hydraulic steering
- Made From Soft Synthetic Materials. They won't scratch your steering rods and they are temperature stable.
- Hassle free return: We aim to provide customers with best service. You are always welcome to contact our staff if you have any questions. We will reply within 24 hours.
- See more on Amazon...
Brand: Ohoho | Manufacturer: Ohoho
Warranty: NO
See On Amazon #13
Panther Marine 55-2401 Auxiliary Motor Steering Kit - Zinc
Asin: B003E1OBTI | Model: 55-2401 | PartNumber: 55-2401 | Ean: 0836125000393 | UPC: 836125000393
Refer To Manufacturer Recommendations And Guidelines To Ensure Proper Use.
Quick And Easy Installation.
Zinc Construction.
Features
- Auxiliary Motor Steering Kit
- Zinc construction
- Refer to manufacturer recommendations and guidelines to ensure proper use
- Quick and easy installation
- See more on Amazon...
Brand: Marinetech | Manufacturer: Panther Marine
Dimensions: 7.75 x 1.25 x 26.25 Inches | Weight: 1.30 pounds
See On Amazon #14
Winibo Outboard Steering Link Lever Stainless Steel Steering Tiller Arm Connecting Rod For Marine Boat
Asin: B09BZ6X8BP | Ean: 0607467271754 | UPC: 607467271754
. Light Weight But Strong, Easily To Be Installed.
. For Marine Boat Outboard Engines Up To 90Hp.
. Link The Steering Cylinder To The Tiller Arm On Outbaords.
.Universally Fit All Outboards Rated To 90Hp.
Features
- . Heavy duty Stainless Steel, durable and corrosion resistent
- .Universally fit all outboards rated to 90hp
- . Light weight but strong, easily to be installed
- . Link the steering cylinder to the tiller arm on outbaords
- . For Marine Boat Outboard Engines up to 90HP
- See more on Amazon...
Brand: Winibo | Manufacturer: Woqi
See On Amazon #15
Bestauto Outboard Steering System 13' Outboard Rotary Steering System 13 Feet Boat Steering Cable with 13" Wheel Durable Marine Steering System
Asin: B083Q5CSM9 | Model: 13ft Quick Connect Boat steering cable | PartNumber: 13ft Quick Connect Boat steering cable | Ean: 0609832205050 | UPC: 609832205050
Durable & Robust Rotary Helm: Characterized By Its Premium Alloy Material, The Rotary Helm Is Rust-Proof And Resistant To Wear. Heavy-Duty Material Ensures Longevity And Easy Maintenance. Adjustable Nuts Are Used To Secure The Rudder And Wheels..
Wide Application: Traditional Mechanical Steering Is Still The Choice For Sterndrives, Inboards, And Other Power-Assisted Applications. Our Rotary Steering System Kit Is Suitable For Mechanical/Manual Steering For Yachts, Fishing Boats, And Other Waterborne Vehicles..
Quick Installation: With Complete Accessories, The Marine Steering Kit Is Easy And Quick To Assemble As You Don't Have To Configure The Parts Separately. Besides, A Simple Snap-In Cable Connection And Different Mounting Hardware Are Provided To Ensurefast Installation. Get Ready To Set Sail And Conquer All Waters..
13 Feet Steering Cable: Our Marine Flat Steering Design Allows For A Firmer Control That Outshines The Competition. And The Steering Cable Meets The Precise Steering Requirements Of Different Types Of Rudders And Cylinders. Please Verify If The Cable Length Matches Your Application..
Features
- High-Performance Rotary Steering System: The VEVOR boat steering system kit is specially designed and developed for marine use. It comes with a 13 ft steering cable, a standard 3/4" tapered shaft, a swivel helmet, a 13.5" steering wheel, a 90-degree bezel kit, and hardware. Enables the vessel to steer accurately and improves work efficiency. Take control of your boat, and create waves all summer long.
- 13 Feet Steering Cable: Our marine flat steering design allows for a firmer control that outshines the competition. And the steering cable meets the precise steering requirements of different types of rudders and cylinders. Please verify if the cable length matches your application.
- Durable & Robust Rotary Helm: Characterized by its premium alloy material, the rotary helm is rust-proof and resistant to wear. Heavy-duty material ensures longevity and easy maintenance. Adjustable nuts are used to secure the rudder and wheels.
- Quick Installation: With complete accessories, the marine steering kit is easy and quick to assemble as you don't have to configure the parts separately. Besides, a simple snap-in cable connection and different mounting hardware are provided to ensurefast installation. Get ready to set sail and conquer all waters.
- Wide Application: Traditional mechanical steering is still the choice for sterndrives, inboards, and other power-assisted applications. Our rotary steering system kit is suitable for mechanical/manual steering for yachts, fishing boats, and other waterborne vehicles.
- See more on Amazon...
Brand: Bestauto | Manufacturer: Bestauto
Dimensions: 6.70 x 23.00 x 19.00 Inches
See On Amazon #16
4" Steer Stop Outboard Hydraulic Steering Lock, Boat Motor Steering Clips, Prevent Swinging of Engine in Trailering, Protect the Steering System, Outboard and Motor Supports
Asin: B0CCZX3VNG | Model: LZWVP-1 | PartNumber: LZWVP-1
Hydraulic Steering Locks Come With A Pair Of 4" Length Clips Fit Most Steering Cylinder Rods On Outboard Engines. Best For 3/4"Diameter Steering Shafts..
Our Sales Purpose Is Committed To The Satisfaction Of Each Customer, If You Have Any Questions Please Contact Us Promptly, We Will Answer You Within 24 Hours..
Effectively Protect Your Outboard: These Outboard Stabilizers Fit Into A 4-Inch Gap On Each Side Of The Hydraulic System's Steering Cylinders, Helping To Prevent The Outboard From Swaying From Side To Side And Keeping The Entire Engine Centered During Transport, Effectively Protecting The Steering System Of The Bass Boat, The Outboard, And The Engine Mounts, And Helping To Prevent Unwanted Movement Of The Hydraulic Steering On Your Boat..
Easy To Install, You Can Clip The Steering Lock To The Hydraulic Steering Column On Both Sides Of The Outboard, It Can Effectively Keep The Engine Flat And Prevent Damage To The Engine Mounts. Minimizes Engine Wobble And Keeps The Engine Flat While Towing..
Features
- Product Information: Product included 1 Set Hydraulic Steering Locks, Please refer to the pictures for product specific size information.
- Easy to install, you can clip the steering lock to the hydraulic steering column on both sides of the outboard, it can effectively keep the engine flat and prevent damage to the engine mounts. Minimizes engine wobble and keeps the engine flat while towing.
- Hydraulic steering locks come with a pair of 4 length clips fit most steering cylinder rods on outboard engines. Best for 3/4diameter steering shafts.
- EFFECTIVELY PROTECT YOUR OUTBOARD: These outboard stabilizers fit into a 4-inch gap on each side of the hydraulic system's steering cylinders, helping to prevent the outboard from swaying from side to side and keeping the entire engine centered during transport, effectively protecting the steering system of the bass boat, the outboard, and the engine mounts, and helping to prevent unwanted movement of the hydraulic steering on your boat.
- Our sales purpose is committed to the satisfaction of each customer, if you have any questions please contact us promptly, we will answer you within 24 hours.
- See more on Amazon...
Brand: LIZEWEI | Manufacturer: LIZEWEI
Warranty: 60 day
See On Amazon #17
SeaStar Mechanism, Pro Series, Tilt
Asin: B012RWOZ68 | Model: SH91800P | PartNumber: SH91800P | Ean: 0831957339338 | UPC: 831957339338
Brand: SeaStar | Manufacturer: SeaStar Solutions
Dimensions: 6.00 x 11.50 x 9.50 inches | Weight: 4.00 Pounds
Warranty: limited warranty
See On Amazon #18
Panther Marine 55-2600 Auxiliary Motor Steering Kit - Stainless Steel
Asin: B000KORNZQ | Model: 55-2600 | PartNumber: 55-2600 | Ean: 0836125006005, 0751738332399 | UPC: 836125006005, 751738332399
Package Height: 66.0 Cm.
Product Type: Fishing Equipment.
Package Width: 18.4 Cm.
Features
- Package length: 2.5 cm
- Package width: 18.4 cm
- Package height: 66.0 cm
- Product Type: FISHING EQUIPMENT
- See more on Amazon...
Brand: Marinetech | Manufacturer: MarineTech Products
Dimensions: 1.25 x 1.00 x 7.25 Inches | Weight: 0.64 pounds
Warranty: LIMITED WARRANTY
See On Amazon #19
VEVOR Hydraulic Steering for Boats 300HP, Outboard Hydraulic Steering Cylinder HC5358-3 & HC5345-3, Front Mount Without Helm Pump or Steering Hose
Asin: B08B1L4RN6 | Model: VEVOR Hydraulic Cylinder 300HP | PartNumber: VEVOR Hydraulic Cylinder 300HP | Ean: 0768558098206 | UPC: 768558098206
【Built-In Two-Way Lock】- The Hydraulic Steering Cylinder Is Equipped With A Built-In Two-Way Locking Valve Which Eliminates Rebound Torque During Torsion..
【Wide Application】- Suitable For Ships Under 300 Horsepower, Outboard-Powered Boats Like The Center Console, Offshore Fishing, Bass Boats, Flats Boats, And Many More..
【Easy To Install】- This Steering Cylinder Includes Positionable Stainless Steel O-Ring (Orb) Fittings For Easy Hose Routing. We Made This Design Also For Easy Installation And Replacement..
【Advanced Crush Resistance】- State Of The Sealing System Offers Superior Resistance To Repeated Compression Set And Is Designed To Better Withstand The Harsh Environment..
Features
- MAX WORKING PRESSURE: 10.3Mpa - The hydraulic steering cylinder for outboard has a working pressure of up to 10.3Mpa, about 1500psi.
- ADVANCED CRUSH RESISTANCE - State of the sealing system offers superior resistance to repeated compression set and is designed to better withstand the harsh environment.
- BUILT-IN TWO-WAY LOCK - The hydraulic steering cylinder is equipped with a built-in two-way locking valve which eliminates rebound torque during torsion.
- EASY TO INSTALL - This steering cylinder includes positionable stainless steel O-Ring (ORB) fittings for easy hose routing. We made this design also for easy installation and replacement.
- WIDE APPLICATION - Suitable for ships under 300 horsepower, outboard-powered boats like the center console, offshore fishing, bass boats, flats boats, and many more.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 3.90 x 24.00 x 5.90 inches | Weight: 1.00 pounds
See On Amazon
Looking For Something Else?
Search