WeldingCity 5-pcs Cast Iron Repair Stick Welding Electrode Rods ENiFe-C1 (Nickel-55 Ni-55) 3/32"x12" | Pack of 5-pcs
Asin: B007RPK3IA | Ean: 0608729698319 | UPC: 608729698319
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Eni-C1 (Nickel-99) Recommended For All-Position Welding Of Thin Cast Iron Sections Where Maximum Machinability Is Required. Since The Core Wire Is Approximately 99% Nickel, Weld Deposits Are Basically "Soft" And Can Be Shaped, Milled, Drilled, Or Tapped. Specifically Suited For Repairing Cracked Or Porous Castings And To Weld Cast Iron To Itself Or Dissimilar Metals Such As Low Alloy And Carbon Steels. And Stainless Steels. More Machinable Than Ni55..
U.S. Based Welding And Hardware Supplier. Strong Technical Support With Experienced Customer Service To Address Buyer's Any Question..
Enife-C1 (Nickel-55) Produces High Strength, Ductile Weld Deposits Even When Welding Low Grade Cast Iron Containing Excessive Levels Of Phosphorus Or Other Contaminants. For All-Position Joining And Surfacing Of Cast Iron, Malleable Iron And Ductile Iron To Itself Or Dissimilar Metals Such As Mild Steel, Stainless Steel, Wrought Alloys Or High Nickel Alloys. With Lower Weld Shrinkage Stress Which In Turn Reduces The Possibility Of Weld Or Heat-Affected Zone Cracking..
Specification: Aws A5.15 Eni-C1 (Nickel Wt >95%) And Enife-C1 (Nickel Wt 55%, Iron 45%). 12'-Long, 3/32"-Dia And 14"-Long, 1/8"-Dia. Preheat Is Required During Welding To Prevent Cracking..
Features
- PRODUCT: premium shielded manual metal arc-welding (SMAW) electrode ENi-C1 (Nickel-99) and ENiFe-C1 (Nickel-55) for stick welding cast iron in maintenance and repair works. Package of 5-pcs, 10-pcs, 20-pcs and 1-lb stick welding electrodes.
- SPECIFICATION: AWS A5.15 ENi-C1 (Nickel wt >95%) and ENiFe-C1 (Nickel wt 55%, Iron 45%). 12'-long, 3/32-dia and 14-long, 1/8-dia. Preheat is required during welding to prevent cracking.
- ENi-C1 (Nickel-99) recommended for all-position welding of thin cast iron sections where maximum machinability is required. Since the core wire is approximately 99% nickel, weld deposits are basically soft and can be shaped, milled, drilled, or tapped. Specifically suited for repairing cracked or porous castings and to weld cast iron to itself or dissimilar metals such as low alloy and carbon steels. and stainless steels. More machinable than Ni55.
- ENiFe-C1 (Nickel-55) produces high strength, ductile weld deposits even when welding low grade cast iron containing excessive levels of phosphorus or other contaminants. For all-position joining and surfacing of cast iron, malleable iron and ductile iron to itself or dissimilar metals such as mild steel, stainless steel, wrought alloys or high nickel alloys. With lower weld shrinkage stress which in turn reduces the possibility of weld or heat-affected zone cracking.
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
- See more on Amazon...
Brand: WeldingCity | Manufacturer: WeldingCity.com
Dimensions: 3.00 x 36.00 x 3.00 Inches | Weight: 0.50 pounds
See On Amazon Similar To WeldingCity 5pcs Cast Iron Repair
#1
Massca Plastic Welding Kit with Plastic Welder, Rods, Reinforcing Mesh, Hot Iron Stand, and Wire Brush - Plastic Bumper Repair Kit DIY Arts, Crafts & Professional Surface Repair, Portable 80 Watt
Asin: B07ZPGJH1V
High-Powered And Portable – Easy To Use Indoors Or Outdoors Our Plastic Welding Tool Is Lightweight, Easy To Manage, And Boasts 80 Watts Of Power That Heats Up Quickly To 525°F..
Trusted Quality Assurance – Here At Massca Products We Take Great Pride In The Quality And Reliability Of Our Welding Plastic Kit Which Is Why It’S Backed By Our Responsiveness Customer Service And 30-Day Guarantee..
Multipurpose Plastic Use – Superior To Standard Plastic Welders This Abs Plastic Weld System Can Be Used With Tpo, Teo, And Pp Materials To Help Expand Your Repairs Or Creative Projects..
Expanded Tool Kit Package – Along With A Hot Iron Welder We’Ve Included A Hands-Free Stand, Reinforcing Mesh To Use On Surfaces, High-Quality Plastic Rods, And Even A Wire Brush To Clean Weld Spots..
Features
- Professional-Grade Repair Tool This versatile plastic welder can be used for repairing surfaces on a car bumper, kayak or canoe, vehicle dashboard, or even fuel tank on an ATV.
- Expanded Tool Kit Package Along with a hot iron welder we ve included a hands-free stand, reinforcing mesh to use on surfaces, high-quality plastic rods, and even a wire brush to clean weld spots.
- High-Powered and Portable Easy to use indoors or outdoors our plastic welding tool is lightweight, easy to manage, and boasts 80 watts of power that heats up quickly to 525 F.
- Multipurpose Plastic Use Superior to standard plastic welders this ABS plastic weld system can be used with TPO, TEO, and PP materials to help expand your repairs or creative projects.
- Trusted Quality Assurance Here at Massca Products we take great pride in the quality and reliability of our welding plastic kit which is why it s backed by our responsiveness customer service and 30-day guarantee.
- See more on Amazon...
Brand: Massca | Manufacturer: Hopo International Inc
Dimensions: 1.80 x 11.80 x 4.50 inches
See On Amazon #2
100W Plastic Welding Kit, Plastic Welder Soldering Iron Kit with 121pcs Rods, Professional Surface Repair Tool for Car Bumper with 4 Welding Tips, Patch Net,Hot Iron Stand,Wire Brush,Metal Stand, etc.
Asin: B0B7DTVHJG | Ean: 0765874125616 | UPC: 765874125616
【Easy To Use & Store】: You Only Need To Clean The Surface Of The Object To Be Welded, And Then Select The Appropriate Rods And Tips. Preheat And Heat With A Plastic Welder And Wait, Then Paste The Repair. The Included Tool Bag Is Very Convenient To Store Small Tools And Is Easy To Carry..
【Package Include】: 1X Soldering Iron Tool, 1X Metal Brush, 56 X Plastic Rods, 4 X Tips(2 X Brass Tips, 2X Stainless Tips), 5 X Aluminum Foil Paper, 3 X Stainless Steel Mesh, 2 X Sandpaper, 1 X Metal Stand, 1 X Screwdriver, 1 X Instruction Manual.
【Wide Range Of Applications】: For Strong, Permanent Repair Of Breaks, Cracks And Tears In Plastic Parts. 7 Types Of Plastic Welding Rods Works With Warious Surfaces: Car Bumper, Dashboard, Kayak, Canoe, Kids Riding Toys, Recycling Bins, Etc..
【Multifunction Soldering Tool】: Unlike Other Soldering Tools, This Soldering Iron Repair Machine Can Easily Smooth Out The Repair Marks. In Addition To The Hot Iron Welding Machine, We Have Configured 4 Different Types Of Welding Heads And 56Pcs Plastic Welding Rods (Abs/Pp/Pe/Tpe/Pc/Pur/Pa) To Use To Meet Your Various Needs..
Features
- New Upgrade : The plastic welding machine has a built-in heating ceramic technology(100W-110V), quickly heat up in a few seconds, with On/Off switch and Indicator, the steel tube design is high temperature resistant and heat dissipation fast. Use a professional welding machine for welding work to bring the cracked plastic back together.
- Multifunction Soldering Tool : Unlike other soldering tools, this soldering iron repair machine can easily smooth out the repair marks. In addition to the hot iron welding machine, we have configured 4 different types of welding heads and 56pcs Plastic Welding Rods (ABS/PP/PE/TPE/PC/PUR/PA) to use to meet your various needs.
- Easy to Use & Store : You only need to clean the surface of the object to be welded, and then select the appropriate rods and tips. Preheat and heat with a plastic welder and wait, then paste the repair. The included tool bag is very convenient to store small tools and is easy to carry.
- Wide Range of Applications : For strong, permanent repair of breaks, cracks and tears in plastic parts. 7 types of plastic welding rods works with warious surfaces: Car Bumper, Dashboard, Kayak, Canoe, Kids Riding Toys, Recycling Bins, etc.
- Package Include : 1x Soldering Iron Tool, 1x Metal Brush, 56 x Plastic Rods, 4 x Tips(2 x brass tips, 2x stainless tips), 5 x aluminum foil paper, 3 x Stainless Steel Mesh, 2 x Sandpaper, 1 x Metal Stand, 1 x Screwdriver, 1 x Instruction Manual
- See more on Amazon...
Brand: VCTSELITY | Manufacturer: VCTSELITY
Dimensions: 2.20 x 5.04 x 0.87 inches | Weight: 1.21 pounds
See On Amazon #3
Plastic Welding Repair Kit - 80W Iron 20 black Rods, Sandpaper,Stainless Steel Mesh, Portable Use - Welder Tools for Car Bumper, Kayak, Canoe,110V Only
Asin: B092MB176Z | Model: Plastic Welding Repair Kit | PartNumber: Plastic Welding Repair Kit | Ean: 0782524435284 | UPC: 782524435284
Solid Copper Tips: We Fix The Problem Of The Tips That Breaks New Solid Tip No More Screwing.
Trusted Quality Assurance – Here We Take Great Pride In The Quality And Reliability Of Our Welding Plastic Kit Which Is Why It’S Backed By Our Responsiveness Customer Service And 30-Day Guarantee..
Great Savings For A Quick Diy Auto Or Plumbing Plastic Repair And Arts And Crafts Projects.
Multipurpose Plastic Use –Car Bumper, Dashboard, Kayak, Canoe, Fuel Tank.
Features
- Professional-Grade Repair Tool Repair TPO, TEO, and PP Materials - Airless Plastic Welder (120V, 60Hz Max) heats up to 525 F. in Just a few mins
- Multipurpose Plastic Use Car Bumper, Dashboard, Kayak, Canoe, Fuel Tank
- SOLID COPPER TIPS: We Fix the Problem of the Tips that Breaks NEW Solid Tip no more Screwing
- Great Savings for a Quick DIY Auto or Plumbing Plastic Repair and Arts and Crafts Projects
- Trusted Quality Assurance Here we take great pride in the quality and reliability of our welding plastic kit which is why it s backed by our responsiveness customer service and 30-day guarantee.
- See more on Amazon...
Brand: RXXXWELD | Manufacturer: RX WELDER
See On Amazon #4
Casting Repair Glue, High Temperature Resistant Liquid Metal Welding Filler, Metal Repair Glue for Metal Casting Defect (80g)
Asin: B0B4N2SZ3C | Model: GB0024-F | PartNumber: GB0024-F | Ean: 0730628410645 | UPC: 730628410645
Long-Lasting Bond Strength: It Forms A Strong And Stable Permanent Bond That Should Last For Ages.Once Cured, Metal Cast Iron Magic Repair Glue Forms A Strong And Stable Permanent Bond, Which Should Be Used For Many Years.It Can Be Shaped, Tapped, Filed, Sanded And Drilled Depending On Its Purpose..
Surface Application: Before Using The Glue, Clean And Drying The Surface And Your Work Should Be Complete Within 20 Minutes After Mixing.Mainly Used For Iron And Steel Casting, Sand Holes And Pores,Also Can Be Used To Repair Fuel Tanks, Plumbing, Concrete Breaks, And A Whole Lot More..
Simple To Use: The Preparation And Application Are Simple And Easy,Just Mix, Sets In Minutes, And Fully Cured In 4-6 Hours..
High-Temperature Resistance: A+B Repair Glue Can Withstand Temperatures Up To 150°C.When Fully Cured, It Is As Hard As Iron And Provides Uniform Bond Line Thickness..
Features
- Warn: The adhesive is now slightly hardened due to generally cooler temperatures in most areas.If the glue is hardened after receiving it, you can soak the A tube glue in hot water for a while, and then take it out for use after the glue becomes soft. If you are not satisfied with the product, we will return it for you for a refund.
- High-Temperature Resistance: A+B repair glue can withstand temperatures up to 150 C.When fully cured, it is as hard as iron and provides uniform bond line thickness.
- Long-lasting Bond Strength: It forms a strong and stable permanent bond that should last for ages.Once cured, Metal cast iron magic repair glue forms a strong and stable permanent bond, which should be used for many years.It can be shaped, tapped, filed, sanded and drilled depending on its purpose.
- Simple to Use: The preparation and application are simple and easy,Just mix, sets in minutes, and fully cured in 4-6 hours.
- Surface Application: Before using the glue, clean and drying the surface and your work should be complete within 20 minutes after mixing.Mainly used for iron and steel casting, sand holes and pores,Also can be used to repair fuel tanks, plumbing, concrete breaks, and a whole lot more.
- See more on Amazon...
Brand: Ganbaro | Manufacturer: Ganbaro
See On Amazon #5
100g Magic Metal Cast Iron Repair Paste Set with Scraper,Industrial Heat Resistance Cold Weld Metal Repair Paste,Miracle Welding Glue for Metal, Plastic, Wood (1-Set)
Asin: B09W98CXFL | Ean: 7295941187726
【 High-Temperature Resistance】A+B Repair Glue Can Withstand Temperatures Up To 150°C. When Fully Cured, It Is As Hard As Iron And Provides Uniform Bond Line Thickness. Stainless Steel Cast Iron Metal Repair Agent Glue..
【Usage Scenarios】Surface Applications: Metal, Plastic, Pvc, Concrete, Wood, Ceramic & Tile And Fiberglass. Use On: Household, Automotive, Marine, Plumbing, Crafts, Outdoor Equipment, Agricultural Equipment, Motorcycle, Toys, Boats, Personal Watercraft, In/Outboard Engines And Deck & Hull Accessories..
【Simple To Use】Big Or Small, You Can Diy It With This Magic Welding Glue. Our Heavy-Duty Epoxy And Adhesives Repair & Restore It Right The First Time. It Will Bond Almost Any Clean Surface That Is Free Of Dirt And Oil. Just Mix, Apply And Let Dry For A Few Hours..
【Long-Lasting Bond Strength】After Mixing The Tubes At A 1: 1 Ratio, It Takes 8 Minutes To Set And 6-12 Hours To Cure. Once Cured, Metal Cast Iron Magic Repair Glue Forms A Strong And Stable Permanent Bond, Which Should Be Used For Many Years. It Can Be Tapped, Filed, Sanded, Molded, And Drilled..
Features
- Permanent Metal Repair Paste Set Magic metal mending agent developed as an alternative to torch welding, Metal repair paste provides strong and long-lasting repairs to metals and multiple other surfaces. Metal repair gel will bond almost any clean surface that is free of dirt and oil.
- Long-lasting Bond Strength After mixing the tubes at a 1: 1 ratio, it takes 8 minutes to set and 6-12 hours to cure. Once cured, Metal cast iron magic repair glue forms a strong and stable permanent bond, which should be used for many years. It can be tapped, filed, sanded, molded, and drilled.
- High-Temperature Resistance A+B repair glue can withstand temperatures up to 150 C. When fully cured, it is as hard as iron and provides uniform bond line thickness. Stainless steel cast iron metal repair agent glue.
- Simple to Use Big or small, you can DIY it with this magic welding glue. Our heavy-duty epoxy and adhesives repair & restore it right the first time. It will bond almost any clean surface that is free of dirt and oil. Just mix, apply and let dry for a few hours.
- Usage Scenarios Surface applications: metal, plastic, PVC, concrete, wood, ceramic & tile and fiberglass. Use on: household, automotive, marine, plumbing, crafts, outdoor equipment, agricultural equipment, motorcycle, toys, boats, personal watercraft, in/outboard engines and deck & hull accessories.
- See more on Amazon...
Brand: LYZH | Manufacturer: LYZH
See On Amazon #6
Nickel 55 Cast Iron Welding Electrode Repair & Maintenance Rods (1/8" - 5 PCS)
Asin: B07VLJDSNP | Ean: 0048944498767 | UPC: 048944498767
Construction And Production Welding On Nodular Cast Iron Parts.
Surfacing And Joining Of All Grades Of Cast Iron.
Features
- Nickel 55 ENiFe-CI Cast Iron Stick Electrodes
- Surfacing and Joining of all grades of cast iron
- Construction and Production welding on nodular cast iron parts
- See more on Amazon...
Brand: HYW Products | Manufacturer: Unknown
See On Amazon #7
Weldcote Metals Nickel 99 Cast Iron Welding Electrode Repair 1/8" 1 lb.
Asin: B005BCTUTY | Model: NI9918E1P | PartNumber: NI9918E1P | Ean: 0877511003918 | UPC: 877511003918
Brand: Weldcote Metals | Manufacturer: Weldcote Metals
Dimensions: 1.00 x 14.00 x 1.00 Inches | Weight: 1.08 pounds
See On Amazon #8
Nickel 99 Cast Iron Welding Electrode Repair & Maintenance Rods (1/8" - 1 LB)
Asin: B07VPRH2NH | Ean: 0048944498835 | UPC: 048944498835
Excellent Machinability.
It Is Perfect For Production And Repair Of Cast Iron..
Features
- ENi-Cl 99% Nickel Alloy Electrodes
- It is perfect for production and repair of cast iron.
- Excellent machinability
- See more on Amazon...
Brand: HYW PRODUCTS | Manufacturer: UNKNOWN
See On Amazon #9
100PCS Plastic Welding Rods - 5 Types of Welding Plastic (PP PU ABS PE TPO) With Storage Box - for Plastic Repair Bumper Repair Kit DIY Arts, Crafts & Professional Surface Repair
Asin: B0B74T945S
【Storage Box Packaging】The Plastic Welding Rods Are Stored In A Portable Storage Box, Which Is Portable, Efficient, And Not Messy, Which Is Convenient For You To Access And Store During Welding..
【Practical Gifts】With Good Electrical Properties, Convenient To Install, And Nice Thermal Stability, These Welder Repair Rods Can Be Regarded As Practical Presents For Handyman, Craft-Lovers, Mechanic To Fix Or Diy Sundry Things.
【Wide Range Of Use】These Pp Welder Sticks Can Be Applied In Various Kinds Of Items, Such As Repairing Car Bumper, Front Or Back Fender Baffle Plate, Battery Shell, Inner Plate Of Motorcycle, Plastic Water Tank, And Others Made Of Pp; The Pvc Welder Rods Are Proper For Repairing Pvc Plastic Flume, Pvc Pipe Sink And Others..
【Multiple Plastic Types】Abs/Pp/Pe/Pvc Various Types Of Plastic Repair Welding Rods That Can Help You Repair Car Bumpers, Kayaks, Lawn Mowers, Plastic Water Tanks And More Broken Plastic Parts..
Features
- Plastic Welding Rod Kit 100 pieces of plastic welding rods in various colors. Sufficient colors, quantities and styles can meet your various needs.
- Multiple Plastic Types ABS/PP/PE/PVC Various types of plastic repair welding rods that can help you repair car bumpers, kayaks, lawn mowers, plastic Water tanks and more broken plastic parts.
- Storage Box Packaging The plastic welding rods are stored in a portable storage box, which is portable, efficient, and not messy, which is convenient for you to access and store during welding.
- Wide range of use These PP welder sticks can be applied in various kinds of items, such as repairing car bumper, front or back fender baffle plate, battery shell, inner plate of motorcycle, plastic water tank, and others made of PP; The PVC welder rods are proper for repairing PVC plastic flume, PVC pipe sink and others.
- Practical Gifts With good electrical properties, convenient to install, and nice thermal stability, these welder repair rods can be regarded as practical presents for handyman, craft-lovers, mechanic to fix or DIY sundry things
- See more on Amazon...
Brand: SOVILEE | Manufacturer: SOVILEE
See On Amazon #10
Low Temp Universal Welding Wire - Perfect For Household Repairs On Copper, Iron, Aluminum Universal Welding Rods & Stainless Steel No Solder Powder Needed
Asin: B0CQ8MWBB3 | Model: dwhs | PartNumber: dwhs | Ean: 0710946576148 | UPC: 710946576148
【Easy To Use】- Our Welding Rods Offer Excellent Weldability, Insulation Resistance, And Are Easy To Use, Making Them Ideal For Beginners Or Professionals..
【Versatile】- Our Low-Temperature Welding Rods Are Ideal For A Variety Of Welding Projects And Can Be Used On Copper, Iron, Aluminum, Stainless Steel, Water Tanks, And Pvc Pipes. (Material Is Relatively Brittle, Received With Broken Is A Normal Phenomenon, Does Not Affect The Use.).
【Durable】- Each Welding Rod Is Made Of High-Quality Material Tin Powder To Ensure Durability And Lifespan, With High Fineness, Fast Welding Speed And No Odor..
【High Strength】- Our Welding Rods Are High-Strength, Making Them Ideal For Soldering On A Variety Of Applications, Circuit Boards, Electronic Devices, And More..
Features
- Low Temperature - Our Electrodes Operate At Low Temperatures, Making Them Ideal For Welding Applications Requiring Lower Heat.
- High Strength - Our Welding Rods Are High-Strength, Making Them Ideal For Soldering On A Variety Of Applications, Circuit Boards, Electronic Devices, And More.
- Easy To Use - Our Welding Rods Offer Excellent Weldability, Insulation Resistance, And Are Easy To Use, Making Them Ideal For Beginners Or Professionals.
- Durable - Each Welding Rod Is Made Of High-Quality Material Tin Powder To Ensure Durability And Lifespan, With High Fineness, Fast Welding Speed And No Odor.
- Versatile - Our low-temperature welding Rods Are Ideal For A Variety Of Welding Projects And Can Be Used On Copper, Iron, Aluminum, Stainless Steel, Water Tanks, And PVC pipes. (Material Is Relatively Brittle, Received With Broken Is A Normal Phenomenon, Does Not Affect The Use.)
- See more on Amazon...
Brand: AbbiyyZ | Manufacturer: encho
See On Amazon #11
Weldcote Metals Nickel 55 Cast Iron Welding Electrode Repair 1/8" 1 lb.
Asin: B005BCUEQW | Ean: 0877511003871 | UPC: 877511003871
Brand: Weldcote Metals | Manufacturer: Weldcote Metals
Dimensions: 1.00 x 6.00 x 1.00 Inches
See On Amazon #12
Weldcote Metals Nickel 55 Cast Iron Welding Electrode Repair 3/32" 1 lb.
Asin: B005BCUIFY | Ean: 0877511003864 | UPC: 877511003864
Brand: Weldcote Metals | Manufacturer: Weldcote Metals
Dimensions: 1.00 x 6.00 x 1.00 Inches
See On Amazon #13
Weldcote Metals Nickel 99 Cast Iron Welding Electrode Repair 3/32" 1 lb.
Asin: B005BCUQV0 | Ean: 0877511003901 | UPC: 877511003901
Brand: Weldcote Metals | Manufacturer: Weldcote Metals
Dimensions: 1.00 x 6.00 x 1.00 Inches | Weight: 1.00 pounds
See On Amazon #14
Caswell Casweld CIS Cast Iron To Steel Welding Rod Kit
Asin: B09MR7YCD4
Brand: Caswell | Manufacturer: Caswell
Weight: 1.00 pounds
See On Amazon #15
Casweld CIS Cast Iron To Steel Welding Rod Kit - 5/32"
Asin: B084WXVTR5 | Ean: 0636947897375 | UPC: 636947897375
Brand: Caswell | Manufacturer: Caswell Inc
Weight: 1.00 pounds
See On Amazon
Looking For Something Else?
Search