WeldingCity 1-lb Cast Iron Repair Stick Welding Electrode Rods ENi-C1 (Nickel-99 Ni-99) 1/8"x14" | Pack of 1-lb
Asin: B007RPK3US | Ean: 0608729698364 | UPC: 608729698364
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Eni-C1 (Nickel-99) Recommended For All-Position Welding Of Thin Cast Iron Sections Where Maximum Machinability Is Required. Since The Core Wire Is Approximately 99% Nickel, Weld Deposits Are Basically "Soft" And Can Be Shaped, Milled, Drilled, Or Tapped. Specifically Suited For Repairing Cracked Or Porous Castings And To Weld Cast Iron To Itself Or Dissimilar Metals Such As Low Alloy And Carbon Steels. And Stainless Steels. More Machinable Than Ni55..
U.S. Based Welding And Hardware Supplier. Strong Technical Support With Experienced Customer Service To Address Buyer's Any Question..
Enife-C1 (Nickel-55) Produces High Strength, Ductile Weld Deposits Even When Welding Low Grade Cast Iron Containing Excessive Levels Of Phosphorus Or Other Contaminants. For All-Position Joining And Surfacing Of Cast Iron, Malleable Iron And Ductile Iron To Itself Or Dissimilar Metals Such As Mild Steel, Stainless Steel, Wrought Alloys Or High Nickel Alloys. With Lower Weld Shrinkage Stress Which In Turn Reduces The Possibility Of Weld Or Heat-Affected Zone Cracking..
Specification: Aws A5.15 Eni-C1 (Nickel Wt >95%) And Enife-C1 (Nickel Wt 55%, Iron 45%). 12'-Long, 3/32"-Dia And 14"-Long, 1/8"-Dia. Preheat Is Required During Welding To Prevent Cracking..
Features
- PRODUCT: premium shielded manual metal arc-welding (SMAW) electrode ENi-C1 (Nickel-99) and ENiFe-C1 (Nickel-55) for stick welding cast iron in maintenance and repair works. Package of 5-pcs, 10-pcs, 20-pcs and 1-lb stick welding electrodes.
- SPECIFICATION: AWS A5.15 ENi-C1 (Nickel wt >95%) and ENiFe-C1 (Nickel wt 55%, Iron 45%). 12'-long, 3/32-dia and 14-long, 1/8-dia. Preheat is required during welding to prevent cracking.
- ENi-C1 (Nickel-99) recommended for all-position welding of thin cast iron sections where maximum machinability is required. Since the core wire is approximately 99% nickel, weld deposits are basically soft and can be shaped, milled, drilled, or tapped. Specifically suited for repairing cracked or porous castings and to weld cast iron to itself or dissimilar metals such as low alloy and carbon steels. and stainless steels. More machinable than Ni55.
- ENiFe-C1 (Nickel-55) produces high strength, ductile weld deposits even when welding low grade cast iron containing excessive levels of phosphorus or other contaminants. For all-position joining and surfacing of cast iron, malleable iron and ductile iron to itself or dissimilar metals such as mild steel, stainless steel, wrought alloys or high nickel alloys. With lower weld shrinkage stress which in turn reduces the possibility of weld or heat-affected zone cracking.
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
- See more on Amazon...
Brand: WeldingCity | Manufacturer: WeldingCity.com
Dimensions: 3.00 x 36.00 x 3.00 inches | Weight: 1.00 Pounds
See On Amazon Similar To WeldingCity 1lb Cast Iron Repair
#1
J-B Weld 8271 KwikWeld Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz.
Asin: B01J5N8AGS | Model: 8271 | PartNumber: 8271 | Ean: 0043425700025, 0043425082718 | UPC: 043425700025, 043425082718
Versatile And Dependable: J-B Weld Kwikweld Is Steel Reinforced, Has A Tensile Strength Of 3127 Psi And Can Withstand Temperatures Up To 230 Degrees Fahrenheit (110 Degrees Celsius). When Fully Cured, Kwikweld Is Waterproof.
Surface Applications: Metal, Plastic & Pvc, Wood, Concrete, Ceramic & Tile And Fiberglass.
Cure And Set Time: After Mixing The Tubes At A 1: 1 Ratio, It Takes 6 Minutes To Set And 4-6 Hours To Cure. Once Cured, Kwikweld Can Be Tapped, Filled, Sanded, Molded And Drilled. J-B Weld Kwikweld’S Set And Cure Color Is Dark Grey.
Features
- J-B Weld kwikweld pro size: Professional 5 OZ Tubes of J-B Weld KwikWeld. KwikWeld is a fast setting version of The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to multiple surfaces. Perfect for DIY
- Cure and set time: After mixing the tubes at a 1: 1 ratio, it takes 6 minutes to set and 4-6 hours to cure. Once cured, KwikWeld can be tapped, filled, sanded, molded and drilled. J-B Weld KwikWeld s set and cure color is dark grey
- Versatile and dependable: J-B Weld KwikWeld is steel reinforced, has a tensile strength of 3127 PSI and can withstand temperatures up to 230 degrees Fahrenheit (110 degrees Celsius). When fully cured, KwikWeld is waterproof
- Surface applications: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass
- See more on Amazon...
First Available: 07/27/2016
Brand: J-B Weld | Manufacturer: JBWeld
Dimensions: 8.46 x 1.77 x 6.50 inches | Weight: 0.50 Pounds
Warranty: as listed
See On Amazon #2
Casting Repair Glue, High Temperature Resistant Liquid Metal Welding Filler, Metal Repair Glue for Metal Casting Defect (80g)
Asin: B0B4N2SZ3C | Model: GB0024-F | PartNumber: GB0024-F | Ean: 0730628410645 | UPC: 730628410645
Long-Lasting Bond Strength: It Forms A Strong And Stable Permanent Bond That Should Last For Ages.Once Cured, Metal Cast Iron Magic Repair Glue Forms A Strong And Stable Permanent Bond, Which Should Be Used For Many Years.It Can Be Shaped, Tapped, Filed, Sanded And Drilled Depending On Its Purpose..
Surface Application: Before Using The Glue, Clean And Drying The Surface And Your Work Should Be Complete Within 20 Minutes After Mixing.Mainly Used For Iron And Steel Casting, Sand Holes And Pores,Also Can Be Used To Repair Fuel Tanks, Plumbing, Concrete Breaks, And A Whole Lot More..
Simple To Use: The Preparation And Application Are Simple And Easy,Just Mix, Sets In Minutes, And Fully Cured In 4-6 Hours..
High-Temperature Resistance: A+B Repair Glue Can Withstand Temperatures Up To 150°C.When Fully Cured, It Is As Hard As Iron And Provides Uniform Bond Line Thickness..
Features
- Warn: The adhesive is now slightly hardened due to generally cooler temperatures in most areas.If the glue is hardened after receiving it, you can soak the A tube glue in hot water for a while, and then take it out for use after the glue becomes soft. If you are not satisfied with the product, we will return it for you for a refund.
- High-Temperature Resistance: A+B repair glue can withstand temperatures up to 150 C.When fully cured, it is as hard as iron and provides uniform bond line thickness.
- Long-lasting Bond Strength: It forms a strong and stable permanent bond that should last for ages.Once cured, Metal cast iron magic repair glue forms a strong and stable permanent bond, which should be used for many years.It can be shaped, tapped, filed, sanded and drilled depending on its purpose.
- Simple to Use: The preparation and application are simple and easy,Just mix, sets in minutes, and fully cured in 4-6 hours.
- Surface Application: Before using the glue, clean and drying the surface and your work should be complete within 20 minutes after mixing.Mainly used for iron and steel casting, sand holes and pores,Also can be used to repair fuel tanks, plumbing, concrete breaks, and a whole lot more.
- See more on Amazon...
Brand: Ganbaro | Manufacturer: Ganbaro
See On Amazon #3
100g Magic Metal Cast Iron Repair Paste Set with Scraper,Industrial Heat Resistance Cold Weld Metal Repair Paste,Miracle Welding Glue for Metal, Plastic, Wood (1-Set)
Asin: B09W98CXFL | Ean: 7295941187726
【 High-Temperature Resistance】A+B Repair Glue Can Withstand Temperatures Up To 150°C. When Fully Cured, It Is As Hard As Iron And Provides Uniform Bond Line Thickness. Stainless Steel Cast Iron Metal Repair Agent Glue..
【Usage Scenarios】Surface Applications: Metal, Plastic, Pvc, Concrete, Wood, Ceramic & Tile And Fiberglass. Use On: Household, Automotive, Marine, Plumbing, Crafts, Outdoor Equipment, Agricultural Equipment, Motorcycle, Toys, Boats, Personal Watercraft, In/Outboard Engines And Deck & Hull Accessories..
【Simple To Use】Big Or Small, You Can Diy It With This Magic Welding Glue. Our Heavy-Duty Epoxy And Adhesives Repair & Restore It Right The First Time. It Will Bond Almost Any Clean Surface That Is Free Of Dirt And Oil. Just Mix, Apply And Let Dry For A Few Hours..
【Long-Lasting Bond Strength】After Mixing The Tubes At A 1: 1 Ratio, It Takes 8 Minutes To Set And 6-12 Hours To Cure. Once Cured, Metal Cast Iron Magic Repair Glue Forms A Strong And Stable Permanent Bond, Which Should Be Used For Many Years. It Can Be Tapped, Filed, Sanded, Molded, And Drilled..
Features
- Permanent Metal Repair Paste Set Magic metal mending agent developed as an alternative to torch welding, Metal repair paste provides strong and long-lasting repairs to metals and multiple other surfaces. Metal repair gel will bond almost any clean surface that is free of dirt and oil.
- Long-lasting Bond Strength After mixing the tubes at a 1: 1 ratio, it takes 8 minutes to set and 6-12 hours to cure. Once cured, Metal cast iron magic repair glue forms a strong and stable permanent bond, which should be used for many years. It can be tapped, filed, sanded, molded, and drilled.
- High-Temperature Resistance A+B repair glue can withstand temperatures up to 150 C. When fully cured, it is as hard as iron and provides uniform bond line thickness. Stainless steel cast iron metal repair agent glue.
- Simple to Use Big or small, you can DIY it with this magic welding glue. Our heavy-duty epoxy and adhesives repair & restore it right the first time. It will bond almost any clean surface that is free of dirt and oil. Just mix, apply and let dry for a few hours.
- Usage Scenarios Surface applications: metal, plastic, PVC, concrete, wood, ceramic & tile and fiberglass. Use on: household, automotive, marine, plumbing, crafts, outdoor equipment, agricultural equipment, motorcycle, toys, boats, personal watercraft, in/outboard engines and deck & hull accessories.
- See more on Amazon...
Brand: LYZH | Manufacturer: LYZH
See On Amazon #4
Nickel 99 Cast Iron Welding Electrode Repair & Maintenance Rods (1/8" - 1 LB)
Asin: B07VPRH2NH | Ean: 0048944498835 | UPC: 048944498835
Excellent Machinability.
It Is Perfect For Production And Repair Of Cast Iron..
Features
- ENi-Cl 99% Nickel Alloy Electrodes
- It is perfect for production and repair of cast iron.
- Excellent machinability
- See more on Amazon...
Brand: HYW PRODUCTS | Manufacturer: UNKNOWN
See On Amazon #5
WeldingCity 1-lb Cast Iron Repair Stick Welding Electrode Rods ENiFe-C1 (Nickel-55 Ni-55) 1/8"x14" | Pack of 1-lb
Asin: B007RPK38A | Ean: 0608729698340 | UPC: 608729698340
Eni-C1 (Nickel-99) Recommended For All-Position Welding Of Thin Cast Iron Sections Where Maximum Machinability Is Required. Since The Core Wire Is Approximately 99% Nickel, Weld Deposits Are Basically "Soft" And Can Be Shaped, Milled, Drilled, Or Tapped. Specifically Suited For Repairing Cracked Or Porous Castings And To Weld Cast Iron To Itself Or Dissimilar Metals Such As Low Alloy And Carbon Steels. And Stainless Steels. More Machinable Than Ni55..
U.S. Based Welding And Hardware Supplier. Strong Technical Support With Experienced Customer Service To Address Buyer's Any Question..
Enife-C1 (Nickel-55) Produces High Strength, Ductile Weld Deposits Even When Welding Low Grade Cast Iron Containing Excessive Levels Of Phosphorus Or Other Contaminants. For All-Position Joining And Surfacing Of Cast Iron, Malleable Iron And Ductile Iron To Itself Or Dissimilar Metals Such As Mild Steel, Stainless Steel, Wrought Alloys Or High Nickel Alloys. With Lower Weld Shrinkage Stress Which In Turn Reduces The Possibility Of Weld Or Heat-Affected Zone Cracking..
Specification: Aws A5.15 Eni-C1 (Nickel Wt >95%) And Enife-C1 (Nickel Wt 55%, Iron 45%). 12'-Long, 3/32"-Dia And 14"-Long, 1/8"-Dia. Preheat Is Required During Welding To Prevent Cracking..
Features
- PRODUCT: premium shielded manual metal arc-welding (SMAW) electrode ENi-C1 (Nickel-99) and ENiFe-C1 (Nickel-55) for stick welding cast iron in maintenance and repair works. Package of 5-pcs, 10-pcs, 20-pcs and 1-lb stick welding electrodes.
- SPECIFICATION: AWS A5.15 ENi-C1 (Nickel wt >95%) and ENiFe-C1 (Nickel wt 55%, Iron 45%). 12'-long, 3/32-dia and 14-long, 1/8-dia. Preheat is required during welding to prevent cracking.
- ENi-C1 (Nickel-99) recommended for all-position welding of thin cast iron sections where maximum machinability is required. Since the core wire is approximately 99% nickel, weld deposits are basically soft and can be shaped, milled, drilled, or tapped. Specifically suited for repairing cracked or porous castings and to weld cast iron to itself or dissimilar metals such as low alloy and carbon steels. and stainless steels. More machinable than Ni55.
- ENiFe-C1 (Nickel-55) produces high strength, ductile weld deposits even when welding low grade cast iron containing excessive levels of phosphorus or other contaminants. For all-position joining and surfacing of cast iron, malleable iron and ductile iron to itself or dissimilar metals such as mild steel, stainless steel, wrought alloys or high nickel alloys. With lower weld shrinkage stress which in turn reduces the possibility of weld or heat-affected zone cracking.
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
- See more on Amazon...
Brand: WeldingCity | Manufacturer: WeldingCity.com
Dimensions: 3.00 x 36.00 x 3.00 inches | Weight: 1.00 pounds
See On Amazon #6
Weldcote Cast Iron Flux 1 Pound Jar
Asin: B00IN6L68I | Ean: 0877511008920 | UPC: 877511008920
Brand: Weldcote Metals | Manufacturer: Weldcote Metals
Dimensions: 1.00 x 6.00 x 1.00 inches | Weight: 1.00 Pounds
See On Amazon #7
Weldcote Metals Nickel 99 Cast Iron Welding Electrode Repair 3/32" 1 lb.
Asin: B005BCUQV0 | Ean: 0877511003901 | UPC: 877511003901
Brand: Weldcote Metals | Manufacturer: Weldcote Metals
Dimensions: 1.00 x 6.00 x 1.00 inches | Weight: 1.00 Pounds
See On Amazon #8
Caswell Casweld CIS Cast Iron To Steel Welding Rod Kit
Asin: B09MR7YCD4
Brand: Caswell | Manufacturer: Caswell
Weight: 1.00 Pounds
See On Amazon
Looking For Something Else?
Search