YG-1 E5982 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 4" Overall Length, 0.4375" Cutting Diameter, 0.4375" Shank Diameter
Asin: B0080BK81M | Model: 36588 | PartNumber: 36588
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.45-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- 45-degree helix provides increased cutting action compared to end mills with lower helix angles
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.25 Pounds
See On Amazon Similar To YG1 E5982 Carbide Square Nose
#1
uxcell Square Nose End Mill, 6mm Tip Dia Solid Carbide AlTiN Coated CNC Router Bits 4 Flute Spiral Milling Cutter HRC55 with 6mm Shank 50mm (2-inch) Length
Asin: B09T3QFDRX | Model: a22010500ux0301 | PartNumber: a22010500ux0301
Wide Applications: Suitable For Cutting Carbon Steel, Malleable Cast Iron, Alloy Steel, Stainless Steel, Die Steel, Tool Steel, Heat Treated Steel. For Shallow Groove Machining, Side Milling And Finishing. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Obtain Better Processing Accuracy And Performance..
Features: Square End Cut, 4-Flute Design, Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting. Altin Composite Coating Can Increase Hardness, Reduce Oxidation Wear For Better Wear Resistance And Extend Tool Life..
Solid Carbide Tool: M30 Carbide End Mill Cutter Is Super Fine Grain Carbide, With High Hardness, Wear Resistance, And Heat Resistance. Carbide Material With Good Milling And Cutting Performance. Carbide Can Run At Higher Speed Than High-Speed Steel..
Features
- Square Nose End Mill: Cutting Diameter: 6mm / 0.24"; cutting flute length: 15mm / 0.59"; shank diameter: 6mm / 0.24"; overall length: 50mm / 2"; cutting hardness: HRC55; spiral angle: 35 degree.
- Solid Carbide Tool: M30 carbide end mill cutter is super fine grain carbide, with high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, stainless steel, die steel, tool steel, heat treated steel. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Features: Square end cut, 4-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. AlTiN composite coating can increase hardness, reduce oxidation wear for better wear resistance and extend tool life.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
YG-1 E5975 Carbide Ball Nose End Mill, Coolant Through, Uncoated (Bright) Finish, 40 Deg Helix, 3 Flutes, 2.375" Overall Length, 0.125" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080HA43I | Model: 38601 | PartNumber: 38601 | Ean: 0768413467444 | UPC: 768413467444
40-Degree Helix Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Features
- Suitable for high-performance machining on aluminum, stainless steel, and copper
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- 40-degree helix provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #3
YG-1 E5982 Carbide Square Nose End Mill, Extra Long Reach, TiCN Monolayer Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 4" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080BKHQ8 | Model: 36593TC | PartNumber: 36593TC
45-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Titanium Carbon Nitride (Ticn) Coating Lubricates The End Mill For High-Temperature Stability And Offers Better Abrasion Resistance Than Uncoated Tools.
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- 45-degree helix provides increased cutting action compared to end mills with lower helix angles
- Titanium carbon nitride (TiCN) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than uncoated tools
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.30 Pounds
See On Amazon #4
YG-1 - 19047 E1072 High Speed Steel (HSS) Square Nose End Mill, Extra Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 3.5625" Overall Length, 0.25" Cutting Diameter, 0.375" Shank Diameter
Asin: B0080CXU2U | Model: 19047 | PartNumber: 19047 | Ean: 0733438190479 | UPC: 733438190479
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
High-Speed Steel For General-Purpose Cutting.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- High-speed steel for general-purpose cutting
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.25 pounds
See On Amazon #5
YG-1 - 2558 E5011 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.25" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter
Asin: B0080CPUIW | Model: 02558 | PartNumber: 02558
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.05 pounds
See On Amazon #6
BOSCH 85451M 1/2 In. x 1 In. Carbide Tipped Extended Round Nose Bit
Asin: B000GYG4V4 | Model: 85451M | PartNumber: 85451M | Ean: 0000346302615 | UPC: 000346302615
Deeper Cut Round Nose Bit.
Micrograin Carbide Tips Provide Superior Wear Resistance And Long Life.
Control Cut Design Helps Minimize Kickback.
Features
- Cuts rounded surface grooves used in a variety of applications including doors and columns
- Control cut design helps minimize kickback
- Deeper cut round nose bit
- Micrograin carbide tips provide superior wear resistance and long life
- See more on Amazon...
Brand: BOSCH | Manufacturer: Bosch
Dimensions: 0.50 x 4.90 x 2.40 inches
See On Amazon #7
YG-1 E5023 Carbide Square Nose End Mill, Double End, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 2" Overall Length, 0.171875" Cutting Diameter, 0.1875" Shank Diameter
Asin: B0080BFH86 | Model: 33564 | PartNumber: 33564
Stub Length Increases The Strength Of The Tool, Making It Less Likely To Break In The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Four Flutes Produce A Better Finish Than Fewer Flutes.
Suitable For General-Purpose Machining On Hardened And High-Alloy Steel, Chromium-Nickel Steel, Steel Casting, Malleable Cast Iron, Brass, Copper, Aluminum With A High Percentage Of Silicon, And Abrasive Plastic.
Features
- Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
- Suitable for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Stub length increases the strength of the tool, making it less likely to break in the workpiece
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #8
uxcell Square Nose End Mill, 5mm Tip Dia Solid Carbide AlTiN Coated CNC Router Bits 2 Flute Spiral Milling Cutter HRC45 with 5mm Shank 50mm (2-inch) Length
Asin: B09T3QMXMR | Model: a22010500ux0335 | PartNumber: a22010500ux0335
Wide Applications: Suitable For Cutting Carbon Steel, Malleable Cast Iron, Alloy Steel, Die Steel, Etc. For Shallow Groove Machining, Side Milling And Finishing. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Obtain Better Processing Accuracy And Performance..
Features: Square End Cut, 2-Flute Design, Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting. Altin Composite Coating Can Increase Hardness, Reduce Oxidation Wear For Better Wear Resistance And Extend Tool Life..
Solid Carbide Tool: P05 Carbide End Mill Cutter Is High Hardness, Wear Resistance, And Heat Resistance. Carbide Material With Good Milling And Cutting Performance, Ensures High Work Efficiency. Carbide Can Run At Higher Speed Than High-Speed Steel..
Features
- Square Nose End Mill: Cutting Diameter: 5mm / 0.2"; cutting flute length: 13mm / 0.51"; shank diameter: 5mm / 0.2"; overall length: 50mm / 2"; cutting hardness: HRC45; spiral angle: 35 degree.
- Solid Carbide Tool: P05 carbide end mill cutter is high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance, ensures high work efficiency. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, die steel, etc. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Features: Square end cut, 2-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. AlTiN composite coating can increase hardness, reduce oxidation wear for better wear resistance and extend tool life.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
YG-1 - 52558 E5018 Carbide Ball Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 3" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter
Asin: B0080D4ICA | Model: 52558 | PartNumber: 52558
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Ball Nose End Mills (Also Called Ball End) Create Contoured Surfaces.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Ball nose end mills (also called ball end) create contoured surfaces
- See more on Amazon...
First Available: 11/25/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #10
YG-1 E1071 High Speed Steel (HSS) Square Nose End Mill, Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 3.0625" Overall Length, 0.25" Cutting Diameter, 0.375" Shank Diameter
Asin: B0080CZUU0 | Model: 18047 | PartNumber: 18047 | Ean: 0733438180470 | UPC: 733438180470
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
High-Speed Steel For General-Purpose Cutting.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- High-speed steel for general-purpose cutting
- See more on Amazon...
First Available: 12/12/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.10 pounds
See On Amazon #11
YG-1 E5978 Carbide Ball Nose End Mill, Long Reach, Uncoated (Bright) Finish, 37 Deg Helix, 2 Flutes, 5" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080HAH30 | Model: 89593 | PartNumber: 89593
37-Degree Helix Provides Increased Cutting Action And Chip Evacuation Compared To Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- 37-degree helix provides increased cutting action and chip evacuation compared to lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.48 pounds
See On Amazon #12
Drill America DEWC-5C6 5/16" C6 Carbide Tipped Square Nose Toolbit, Dew Series
Asin: B0771FDZPV | Model: DEWC-5C6 | PartNumber: DEWC-5C6 | Ean: 0887861167222 | UPC: 887861167222
Dew Series.
Qualtech Brand.
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 2.00 pounds
See On Amazon #13
YG-1 E2005 Cobalt Steel Micro Square Nose End Mill, Double End, Long Reach, Uncoated (Bright) Finish, 39 Deg Helix, 2 Flutes, 2.5" Overall Length, 0.0625" Cutting Diameter, 0.1875" Shank Diameter
Asin: B0080CKV1S | Model: 51256 | PartNumber: 51256
Long-Length Miniature End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length Miniature End Mills.
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Suitable For Finishing Precision Components On Steel, Stainless Steel, Titanium, Titanium Alloys, Hard Brass And Bronze, Copper, Plastic, Wood, Aluminum, And Aluminum Alloys.
Double-End Square End Mills Create Sharp, Unrounded Cuts And Have Cutting Edges On Both Ends For Longer Tool Life.
Features
- Miniature end mills have small cutting and shank diameters for better control than larger tools when creating precise details and contours
- Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
- Long-length miniature end mills have longer cutting edges and can make deeper cuts than standard-length miniature end mills
- Suitable for finishing precision components on steel, stainless steel, titanium, titanium alloys, hard brass and bronze, copper, plastic, wood, aluminum, and aluminum alloys
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.15 pounds
See On Amazon #14
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, 37 Deg Helix, 2 Flutes, 6" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080CJYAW | Model: 39904 | PartNumber: 39904 | Ean: 0300878206475 | UPC: 300878206475
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #15
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 37 Deg Helix, 2 Flutes, 4" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080CJOLQ | Model: 39573 | PartNumber: 39573 | Ean: 0300878206291 | UPC: 300878206291
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
First Available: 12/12/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.05 pounds
See On Amazon #16
YG-1 - 1573 E5020 Carbide Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.5" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080B71DA | Model: 01573 | PartNumber: 01573
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Suitable For Machining On Hardened And High-Alloy Steel, Chromium-Nickel Steel, Steel Casting, Malleable Cast Iron, Brass, Copper, Aluminum With A High Percentage Of Silicon, And Abrasive Plastic.
Features
- Center-cutting design allows the end mill to plunge into material like a drill bit for applications such as slotting, drilling, and pocketing, as well as general-purpose machining
- Suitable for machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
First Available: 11/25/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.07 pounds
See On Amazon #17
YG-1 E5024 Carbide Square Nose End Mill, Double End, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3.0625" Overall Length, 0.125" Cutting Diameter, 0.375" Shank Diameter
Asin: B0080B1IZC | Model: 13559 | PartNumber: 13559 | Ean: 0733438135593 | UPC: 733438135593
Four Flutes Produce A Better Finish Than Fewer Flutes.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Suitable For General-Purpose Machining On Hardened And High-Alloy Steel, Chromium-Nickel Steel, Steel Casting, Malleable Cast Iron, Brass, Copper, Aluminum With A High Percentage Of Silicon, And Abrasive Plastic.
Features
- Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
- Suitable for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Dimensions: 0.70 x 3.50 x 0.70 inches
See On Amazon #18
uxcell 2pcs 5mm Dia 5mm Shank Square Nose End Mill 2 Flutes HRC55 Carbide AlTiN Coated CNC Router Bits Cutter Tools for End Milling CNC Machining, Black
Asin: B0D21SWFPS
Altin Coating: The Surface Treatment Uses Altin Coating, Which Has High Hardness, Making The Tool Surface Resistant To Cutting Forces And Wear, Extending Service Life; Secondly, It Also Has Excellent Wear Resistance And Heat Resistance, Thereby Reducing Cutting Forces , Improve Cutting Speed And Efficiency, So That The Tool Maintains Stable Performance; In Addition, The Altin Coating Surface Has Good Lubricity, Which Can Reduce The Adhesion Of Chips Between The Tool And The Workpiece, Which Help.
Widely Applications: Suitable For Cutting Carbon Steel, Malleable Cast Iron, Alloy Steel, Die Steel, Etc. For Shallow Groove Machining, Side Milling And Finishing. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Feature: The Helix Angle Of This Milling Cutter Is 46 Degrees. It Provides The Best Cutting Effect And Improves Chip Removal During Cutting, Thereby Improving Cutting Efficiency And Surface Quality. This Angled Design Can Also Reduce The Load On Cutting And Machine Tools During Processing, Improve Heat Dissipation Performance, And Extend The Service Life Of Cutting Tools And Equipment..
Solid Carbide: The Milling Cutter Is Made Of Tungsten Steel (Carbide), Which Has A Series Of Excellent Properties Such As High Hardness, Wear Resistance, Good Strength And Toughness, Heat Resistance, And Corrosion Resistance. These Properties Extend Tool Life And Keep End Mills Edge Blades, Helping To Improve Cutting Accuracy And Efficiency..
Features
- Square Nose End Mill: Cutting Diameter: 5mm /0.2"; cutting flute length: 13mm /0.51"; shank diameter: 5mm / 0.2"; overall length: 50mm / 1.97"; cutting hardness: HRC55; spiral angle: 35 degree.
- Solid Carbide: The milling cutter is made of tungsten steel (carbide), which has a series of excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance, and corrosion resistance. These properties extend tool life and keep end mills edge blades, helping to improve cutting accuracy and efficiency.
- AlTiN Coating: The surface treatment uses AlTiN coating, which has high hardness, making the tool surface resistant to cutting forces and wear, extending service life; secondly, it also has excellent wear resistance and heat resistance, thereby reducing cutting forces , Improve cutting speed and efficiency, so that the tool maintains stable performance; in addition, the AlTiN coating surface has good lubricity, which can reduce the adhesion of chips between the tool and the workpiece, which help
- Feature: The helix angle of this milling cutter is 46 degrees. It provides the best cutting effect and improves chip removal during cutting, thereby improving cutting efficiency and surface quality. This angled design can also reduce the load on cutting and machine tools during processing, improve heat dissipation performance, and extend the service life of cutting tools and equipment.
- Widely Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, die steel, etc. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 2pcs 5mm Dia 5mm Shank Square Nose End Mill 4 Flutes HRC55 Carbide AlTiN Coated CNC Router Bits Cutter Tools for End Milling CNC Machining, Black
Asin: B0D21N7XCV
Altin Coating: The Surface Treatment Uses Altin Coating, Which Has High Hardness, Making The Tool Surface Resistant To Cutting Forces And Wear, Extending Service Life; Secondly, It Also Has Excellent Wear Resistance And Heat Resistance, Thereby Reducing Cutting Forces , Improve Cutting Speed And Efficiency, So That The Tool Maintains Stable Performance; In Addition, The Altin Coating Surface Has Good Lubricity, Which Can Reduce The Adhesion Of Chips Between The Tool And The Workpiece, Which Help.
Widely Applications: Suitable For Cutting Carbon Steel, Malleable Cast Iron, Alloy Steel, Die Steel, Etc. For Shallow Groove Machining, Side Milling And Finishing. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Feature: The Helix Angle Of This Milling Cutter Is 43 Degrees. It Provides The Best Cutting Effect And Improves Chip Removal During Cutting, Thereby Improving Cutting Efficiency And Surface Quality. This Angled Design Can Also Reduce The Load On Cutting And Machine Tools During Processing, Improve Heat Dissipation Performance, And Extend The Service Life Of Cutting Tools And Equipment..
Solid Carbide: The Milling Cutter Is Made Of Tungsten Steel (Carbide), Which Has A Series Of Excellent Properties Such As High Hardness, Wear Resistance, Good Strength And Toughness, Heat Resistance, And Corrosion Resistance. These Properties Extend Tool Life And Keep End Mills Edge Blades, Helping To Improve Cutting Accuracy And Efficiency..
Features
- Square Nose End Mill: Cutting Diameter: 5mm /0.2"; cutting flute length: 13mm /0.51"; shank diameter: 5mm / 0.2"; overall length: 50mm / 1.97"; cutting hardness: HRC55; spiral angle: 35 degree.
- Solid Carbide: The milling cutter is made of tungsten steel (carbide), which has a series of excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance, and corrosion resistance. These properties extend tool life and keep end mills edge blades, helping to improve cutting accuracy and efficiency.
- AlTiN Coating: The surface treatment uses AlTiN coating, which has high hardness, making the tool surface resistant to cutting forces and wear, extending service life; secondly, it also has excellent wear resistance and heat resistance, thereby reducing cutting forces , Improve cutting speed and efficiency, so that the tool maintains stable performance; in addition, the AlTiN coating surface has good lubricity, which can reduce the adhesion of chips between the tool and the workpiece, which help
- Feature: The helix angle of this milling cutter is 43 degrees. It provides the best cutting effect and improves chip removal during cutting, thereby improving cutting efficiency and surface quality. This angled design can also reduce the load on cutting and machine tools during processing, improve heat dissipation performance, and extend the service life of cutting tools and equipment.
- Widely Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, die steel, etc. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search