YG-1 - 54904 E5026 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 2 Flutes, 4" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter
Asin: B0080CAGYK | Model: 54904 | PartNumber: 54904
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.10 Pounds
See On Amazon Similar To YG1 54904 E5026 Carbide Square
#1
YG-1 28565 Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, Uncoated Finish, 2" Length, 3/16"
Asin: B0080AVRX6 | Model: 28565 | PartNumber: 28565 | Ean: 0635963995287 | UPC: 635963995287
Improved Surface Roughness-Cylindrical Margin Which Is Controlled Tightly.
Superior Chip Evacuation.
Maximum-Metal Removal Rate.
3Flute And 45° Helix Allow Harmonic Balance At High Speed Condition And Smooth Cutting.
Features
- High velocity milling of aluminum & other non-ferrous materials
- 3flute and 45 helix allow harmonic balance at high speed condition and smooth cutting
- Improved surface roughness-cylindrical margin which is controlled tightly
- Maximum-metal removal rate
- Superior chip evacuation
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 pounds
See On Amazon #2
YG-1 - 54901 E5026 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 2 Flutes, 6" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080CAG9A | Model: 54901 | PartNumber: 54901
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.15 Pounds
See On Amazon #3
YG-1 28588 Carbide Alu-Power Square End Mill, 3 Flute, 45 Degree Helix, Regular Length, Uncoated Finish, 2-3/4" Length, 7/16"
Asin: B0080AVXBM | Model: 28588 | PartNumber: 28588 | Ean: 0635963995362 | UPC: 635963995362
Improved Surface Roughness-Cylindrical Margin Which Is Controlled Tightly.
Superior Chip Evacuation.
Maximum-Metal Removal Rate.
3Flute And 45° Helix Allow Harmonic Balance At High Speed Condition And Smooth Cutting.
Features
- High velocity milling of aluminum & other non-ferrous materials
- 3flute and 45 helix allow harmonic balance at high speed condition and smooth cutting
- Improved surface roughness-cylindrical margin which is controlled tightly
- Maximum-metal removal rate
- Superior chip evacuation
- See more on Amazon...
First Available: 03/12/2017
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.19 Pounds
See On Amazon #4
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 37 Deg Helix, 2 Flutes, 4" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080CJOLQ | Model: 39573 | PartNumber: 39573 | Ean: 0300878206291 | UPC: 300878206291
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
First Available: 12/12/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.05 pounds
See On Amazon #5
YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6" Overall Length, 0.4375" Cutting Diameter, 0.4375" Shank Diameter -55588
Asin: B0080C5GJU | Model: 55588 | PartNumber: 55588 | Ean: 0085937555885 | UPC: 085937555885
Four Flutes Produce A Better Finish Than Fewer Flutes.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #6
YG-1 - 19176 E1072 High Speed Steel (HSS) Square Nose End Mill, Extra Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 8.5" Overall Length, 1" Cutting Diameter, 1" Shank Diameter
Asin: B0080CXXEU | Model: 19176 | PartNumber: 19176 | Ean: 0733438191766 | UPC: 733438191766
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
High-Speed Steel For General-Purpose Cutting.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- High-speed steel for general-purpose cutting
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 1.36 pounds
See On Amazon #7
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, 37 Deg Helix, 2 Flutes, 6" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080CJYAW | Model: 39904 | PartNumber: 39904 | Ean: 0300878206475 | UPC: 300878206475
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #8
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, 37 Deg Helix, 2 Flutes, 5" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080CJUA6 | Model: 39598 | PartNumber: 39598 | Ean: 0300878206451 | UPC: 300878206451
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #9
YG-1 E5068 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, Non-Center Cutting, 45 Deg Helix, 5 Flutes, 6" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080CXKYS | Model: 58598 | PartNumber: 58598
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Designed To Machine Stainless Steel, Inconels And Other Alloys.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Designed to machine stainless steel, inconels and other alloys
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #10
YG-1 E1034 High Speed Steel (HSS) Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 4 Flutes, 6.5" Overall Length, 1" Cutting Diameter, 1" Shank Diameter
Asin: B0080CLIEC | Model: 05176 | PartNumber: 05176
High-Speed Steel Is Compatible With A Variety Of Materials.
Square Nose End Mills (Also Called Square End) Create Sharp, Unrounded Cuts.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Four Flutes Produce A Better Finish Than Fewer Flutes.
Features
- Long-length end mills have longer cutting edges than standard-length end mills for increased cutting length
- Four flutes produce a better finish than fewer flutes
- High-speed steel is compatible with a variety of materials
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- Square nose end mills (also called square end) create sharp, unrounded cuts
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.85 pounds
See On Amazon #11
YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 7" Overall Length, 1" Cutting Diameter, 1" Shank Diameter
Asin: B0080CKKTQ | Model: 40908 | PartNumber: 40908 | Ean: 0733438409083 | UPC: 733438409083
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Extended-Reach Neck Style Provides Access To Recessed Areas Of The Workpiece.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Extended-reach neck style provides access to recessed areas of the workpiece
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #12
YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 6" Overall Length, 0.625" Cutting Diameter, 0.625" Shank Diameter
Asin: B0080CKHF8 | Model: 40903 | PartNumber: 40903 | Ean: 0300878207229 | UPC: 300878207229
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Extended-Reach Neck Style Provides Access To Recessed Areas Of The Workpiece.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Extended-reach neck style provides access to recessed areas of the workpiece
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #13
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, 37 Deg Helix, 2 Flutes, 7" Overall Length, 0.625" Cutting Diameter, 0.625" Shank Diameter
Asin: B0080CJXR6 | Model: 39903 | PartNumber: 39903 | Ean: 0300878206437 | UPC: 300878206437
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #14
YG-1 E5066 Carbide Square Nose End Mill, Uncoated (Bright) Finish, Non-Center Cutting, 45 Deg Helix, 5 Flutes, 2" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter
Asin: B0080C9I1M | Model: 85565 | PartNumber: 85565
45-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Five Flutes Produce A Better Finish Than Fewer Flutes.
Stub Length Increases The Strength Of The Tool, Making It Less Likely To Break In The Workpiece.
Features
- Suitable for general-purpose machining on materials such as stainless steel and nickel-based alloys
- Stub length increases the strength of the tool, making it less likely to break in the workpiece
- 45-degree helix provides increased cutting action compared to end mills with lower helix angles
- Five flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #15
YG-1 E5254 Carbide Square Nose End Mill, Uncoated (Bright) Finish, Finishing Cut, 42 Deg Helix, 2 Flutes, 4" Overall Length, 1" Cutting Diameter, 1" Shank Diameter
Asin: B0080C8TRG | Model: 21600 | PartNumber: 21600 | Ean: 0300878205973 | UPC: 300878205973
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Low Surface Roughness On The Cutting Edge Reduces Friction And Prevents Chips From Sticking To The Tool.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for high-performance plunging and machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Low surface roughness on the cutting edge reduces friction and prevents chips from sticking to the tool
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #16
YG-1 E5253 Carbide Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 42 Deg Helix, 2 Flutes, 3.5" Overall Length, 0.625" Cutting Diameter, 0.625" Shank Diameter
Asin: B0080C61LW | Model: 17595 | PartNumber: 17595 | Ean: 0733438175957 | UPC: 733438175957
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Low Surface Roughness On The Cutting Edge Reduces Friction And Prevents Chips From Sticking To The Tool.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for high-performance plunging and machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Low surface roughness on the cutting edge reduces friction and prevents chips from sticking to the tool
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #17
YG-1 E5980 Carbide Square Nose End Mill, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 2" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter
Asin: B0080BT25A | Model: 25565 | PartNumber: 25565 | Ean: 0300878207656 | UPC: 300878207656
45-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Stub Length Increases The Strength Of The Tool, Making It Less Likely To Break In The Workpiece.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Stub length increases the strength of the tool, making it less likely to break in the workpiece
- 45-degree helix provides increased cutting action compared to end mills with lower helix angles
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #18
YG-1 E5982 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 6" Overall Length, 1" Cutting Diameter, 1" Shank Diameter
Asin: B0080BKCVS | Model: 36600 | PartNumber: 36600
45-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- 45-degree helix provides increased cutting action compared to end mills with lower helix angles
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #19
YG-1 E5067 Carbide Square Nose End Mill, Uncoated (Bright) Finish, Non-Center Cutting, 45 Deg Helix, 5 Flutes, 3.5" Overall Length, 0.625" Cutting Diameter, 0.625" Shank Diameter
Asin: B0080BDKDU | Model: 86595 | PartNumber: 86595
45-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Five Flutes Produce A Better Finish Than Fewer Flutes.
Features
- Suitable for general-purpose machining on stainless steel and nickel-based alloys
- Five flutes produce a better finish than fewer flutes
- 45-degree helix provides increased cutting action compared to end mills with lower helix angles
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #20
YG-1 E5981 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 5" Overall Length, 1" Cutting Diameter, 1" Shank Diameter
Asin: B0080B0KWO | Model: 28600 | PartNumber: 28600
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Square Nose End Mills (Also Called Square End) Create Sharp, Unrounded Cuts.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Geometry Allows For High Cutting Speeds, Smooth Cutting Action, And Stability.
Features
- 45-degree helix provides efficient cutting action and chip evacuation required to machine aluminum and other nonferrous materials
- Geometry allows for high cutting speeds, smooth cutting action, and stability
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Square nose end mills (also called square end) create sharp, unrounded cuts
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon
Looking For Something Else?
Search