Melin Tool AMG Carbide Corner Radius End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 4" Overall Length, 1" Cutting Diameter, 1" Shank Diameter, 0.030" Corner Radius
Asin: B0083J7CIS | Model: 15356 | PartNumber: 15356 | Ean: 0733438153566 | UPC: 733438153566
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Suitable For General-Purpose Machining On Most Medium-Hardness Materials, Including Steel, Brass, Iron, And Nonferrous Materials.
Features
- Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life
- Suitable for general-purpose machining on most medium-hardness materials, including steel, brass, iron, and nonferrous materials
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon Similar To Melin Tool AMG Carbide Corner
#1
Melin Tool BRMG-S Carbide Micro Corner Rounding End Mill, Double End, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 2 Flutes, 1.5000" Overall Length, 0.047" Cutting Diameter, 0.125" Shank Diameter
Asin: B0083K3KL0 | Model: 11179 | PartNumber: 11179 | Ean: 0733438111795 | UPC: 733438111795
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Radius Is Form Relieved.
Can Provide Uniform Finish On Corners.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Can provide uniform finish on corners
- Radius is form relieved
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #2
Melin Tool BRMG-S Carbide Micro Corner Rounding End Mill, Double End, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 2 Flutes, 1.5000" Overall Length, 0.047" Cutting Diameter, 0.125" Shank Diameter
Asin: B0083K3JWK | Model: 11178 | PartNumber: 11178 | Ean: 0733438111788 | UPC: 733438111788
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Radius Is Form Relieved.
Can Provide Uniform Finish On Corners.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Can provide uniform finish on corners
- Radius is form relieved
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #3
Melin Tool AMG-M-M Carbide Corner Radius End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 70mm Overall Length, 9mm Cutting Diameter, 10mm Shank Diameter, 0.7mm Corner Radius
Asin: B0083JKO38 | Model: 16861 | PartNumber: 16861 | Ean: 0733438168614 | UPC: 733438168614
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
30 Degree Helix Angle.
Used When A Radius Is Permissable.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Used when a radius is permissable
- 30 Degree helix angle
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #4
Melin Tool AMG-DP Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 2.5" Overall Length, 0.3125" Cutting Diameter, 0.3125" Shank Diameter
Asin: B0083JERQI | Model: 52193 | PartNumber: 52193 | Ean: 0733438521938 | UPC: 733438521938
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Available In 60 Degree Points.
Can Be Used For Drilling, Slotting, Chamfering, And Profile Milling.
Aluminum Titanium Nitride Is Similar To Tialn But With A Higher Aluminum Content For Improved Hardness And Smoothness.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness
- Round shanks allow use with a wide variety of toolholding systems
- Can be used for drilling, slotting, chamfering, and profile milling
- Available in 60 degree points
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #5
Melin Tool AMG Carbide Corner Radius End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter, 0.030" Corner Radius
Asin: B0083J7YCM | Model: 15304 | PartNumber: 15304 | Ean: 0733438153047 | UPC: 733438153047
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Suitable For General-Purpose Machining On Most Medium-Hardness Materials, Including Steel, Brass, Iron, And Nonferrous Materials.
Features
- Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life
- Suitable for general-purpose machining on most medium-hardness materials, including steel, brass, iron, and nonferrous materials
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #6
Melin Tool AMG Carbide Corner Radius End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter, 0.020" Corner Radius
Asin: B0083J7XZ0 | Model: 15302 | PartNumber: 15302 | Ean: 0733438153023 | UPC: 733438153023
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Suitable For General-Purpose Machining On Most Medium-Hardness Materials, Including Steel, Brass, Iron, And Nonferrous Materials.
Features
- Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life
- Suitable for general-purpose machining on most medium-hardness materials, including steel, brass, iron, and nonferrous materials
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #7
Melin Tool AMG Carbide Corner Radius End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter, 0.015" Corner Radius
Asin: B0083J7XJ6 | Model: 11551 | PartNumber: 11551 | Ean: 0733438115519 | UPC: 733438115519
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Suitable For General-Purpose Machining On Most Medium-Hardness Materials, Including Steel, Brass, Iron, And Nonferrous Materials.
Features
- Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life
- Suitable for general-purpose machining on most medium-hardness materials, including steel, brass, iron, and nonferrous materials
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #8
Melin Tool AMG Carbide Corner Radius End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.25" Shank Diameter, 0.045" Corner Radius
Asin: B0083J7WWE | Model: 15310 | PartNumber: 15310 | Ean: 0733438153108 | UPC: 733438153108
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Suitable For General-Purpose Machining On Most Medium-Hardness Materials, Including Steel, Brass, Iron, And Nonferrous Materials.
Features
- Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life
- Suitable for general-purpose machining on most medium-hardness materials, including steel, brass, iron, and nonferrous materials
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #9
Melin Tool AMG Carbide Corner Radius End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.25" Shank Diameter, 0.030" Corner Radius
Asin: B0083J7WDI | Model: 15308 | PartNumber: 15308 | Ean: 0733438153085 | UPC: 733438153085
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Suitable For General-Purpose Machining On Most Medium-Hardness Materials, Including Steel, Brass, Iron, And Nonferrous Materials.
Features
- Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life
- Suitable for general-purpose machining on most medium-hardness materials, including steel, brass, iron, and nonferrous materials
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #10
Melin Tool AMG Carbide Corner Radius End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.5000" Overall Length, 0.3125" Cutting Diameter, 0.3125" Shank Diameter, 0.030" Corner Radius
Asin: B0083J7SGO | Model: 15314 | PartNumber: 15314 | Ean: 0733438153146 | UPC: 733438153146
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Suitable For General-Purpose Machining On Most Medium-Hardness Materials, Including Steel, Brass, Iron, And Nonferrous Materials.
Features
- Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life
- Suitable for general-purpose machining on most medium-hardness materials, including steel, brass, iron, and nonferrous materials
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon
Looking For Something Else?
Search