18 Precision Steel Miter Bar Rail Runner with Adjustable Spring Loaded Plungers For DIY Table Saw Crosscut Sleds, Jigs and Fixtures to Slide in 3/4 inch by 3/8 inch Miter Slots
Asin: B008RYTMXM | Model: 3337 | PartNumber: 3337 | Ean: 0810948015819 | UPC: 810948015819
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Not Only Is The Fulton Steel Miter Bar Adjustable, Its Easy To Mount! You Can Mount The Bar From The Top Of Your Sled, Jig Or Fixture Platform Or Base, Or You Can Mount It From The Bottom. There Are Three Threaded Holes Along The Length Of The Bar For Mounting The Bar Using 1/4 Inch By 20 Tpi Machine Screws (Not Included). There Are Also Three Counter Sunk Holes On The Bar To Mount The Bar Using #8 Wood Screws (Not Included)..
The Bar Is Approximately 18 Inches Long And Will Fit Into Miter T Slots And U-Shaped Miter Slots. Non-Standard Slots Found On Some Job Site Style Table Saws And Other Small Machinery Will Not Accept This Bar Due To The Non-Standard Slot Dimensions. We Recommend That You Measure Your Miter Slot Before Placing Your Order..
Once You Mount The Bars To Your Sled, Jig Or Fixture You Are Sure To Feel The Difference. This Is Especially True When You First Run The Bars Through Your Miter Slots. The Smooth Sliding Action Is Perfect For Crosscut Sleds, Miter Angle Jigs, Shop Made Coping Sleds And A Whole Lot More! Using Two Bars (Only One Is Included) For Even More Stability Works Exceptionally Well..
When Building Sleds, Jigs And Fixtures One Of The Most Important Aspects Is To Achieve A Smooth Sliding Action Without Side To Side Play. The Fulton Precision Steel Miter Bar Does Both With Its Solid Steel Bar And 4 Adjustable Spring Loaded Plungers. The Plungers Can Be Adjusted With The Included Hex Key Wrench For Just The Right Fit..
Features
- Build your next table saw sled, router table jig or band saw fixture to operate with a smooth sliding action using the Fulton 18 inch Precision Steel Miter Bar! Attach the steel bar to most any type of sled, jig or fixture that is to be used with a 3/4 inch (19mm) by 3/8 inch (9mm) miter slot. Using our steel bar versus plastic or aluminum gives your sled, jig or fixture more strength and stability and it won t bend or warp.
- When building sleds, jigs and fixtures one of the most important aspects is to achieve a smooth sliding action without side to side play. The Fulton Precision Steel Miter Bar does both with its solid steel bar and 4 adjustable spring loaded plungers. The plungers can be adjusted with the included hex key wrench for just the right fit.
- Not only is the Fulton Steel Miter Bar adjustable, its easy to mount! You can mount the bar from the top of your sled, jig or fixture platform or base, or you can mount it from the bottom. There are three threaded holes along the length of the bar for mounting the bar using 1/4 inch by 20 tpi machine screws (not included). There are also three counter sunk holes on the bar to mount the bar using #8 wood screws (not included).
- Once you mount the bars to your sled, jig or fixture you are sure to feel the difference. This is especially true when you first run the bars through your miter slots. The smooth sliding action is perfect for crosscut sleds, miter angle jigs, shop made coping sleds and a whole lot more! Using two bars (only one is included) for even more stability works exceptionally well.
- The bar is approximately 18 inches long and will fit into miter t slots and u-shaped miter slots. Non-standard slots found on some job site style table saws and other small machinery will not accept this bar due to the non-standard slot dimensions. We recommend that you measure your miter slot before placing your order.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc
See On Amazon Similar To 18 Precision Steel Miter Bar
#1
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
Asin: B087XWCV61 | Model: 11567 | PartNumber: 11567 | Ean: 0817918022532 | UPC: 817918022532
The Head Is Mounted To A Solid Steel Miter Bar That Measure 18” In Length And Is .354” Thick By .730” Wide. Standard Miter Slots Are 3/4” X 3/8” With A 1/8” “T” Slot (Slight Variances From Brand To Brand) Running The Length On The Bottom Of The Slot. The Steel Miter Bar Is Equipped With A Metal, Removable Retaining Disc That Measures 7/8” In Diameter And Is Just Shy Of 1/8” To Fit Into To The “T” Slot To Prevent Accidental Lifting When Feeding Your Stock Through..
Both Ends Of The Fence Are Cut At Exactly 45 Degrees. This Allows You To Position The Fence Extra Close To The Saw Blade (With The Power Turned Off) So You Have Even More Control Over The Workpiece You Are Cutting. The Fence Comes With A Flip Stop That Makes Repetitive Cuts A Breeze. When Not In Use The Flip Stop Can Be Flipped Up And Out Of The Way. Also Include Are Two Sticky Back Measuring Tapes. 1 Tape Is Left To Right Reading And The Other Is Right To Left Reading..
Made From A Single Piece Of Extruded Aluminum, This Precision Miter Gauge Fence Is Not Only Durable, Its Accurate And Saves Setup Time. The Fence Is Designed To Be Used With Most Any Miter Gauge With Its Off-Set Mounting Track On The Back Of The Fence. The Off-Set Track Allows You To Flip The Fence For Lower Profile Miter Gauge Mounts And Flip Back For Standard Height Miter Gauges. The Fence Can Be Mounted To Older Miter Gauges By Adding A Wooden Block Mount With Wooden Screws If Necessary..
The .200” Thick, Adjustable, Solid Aluminum Head Is Machined With 13 Positive Stop Holes. 1 Hole Is At 90 Degrees While The 6 Holes On Both Sides Are At 22.5, 30, 45, 60, 67.5 And 90 Degrees. The Positive Stops Are Perfect For Many Woodworking Projects As They Are The Angles That Are Typically Used.To Adjust The Head You Simply Loosen The Post Knob Handle, Pull The Spring Loaded Indexing Pin Outward, Rotate The Head To The Desired Position, Release The Pin And Lock Into Place..
Features
- The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
- The .200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
- The head is mounted to a solid steel miter bar that measure 18 in length and is .354 thick by .730 wide. Standard miter slots are 3/4 x 3/8 with a 1/8 T slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8 in diameter and is just shy of 1/8 to fit into to the T slot to prevent accidental lifting when feeding your stock through.
- Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
- Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools Inc.
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 2.50 Pounds
See On Amazon #2
90 Degree Positioning Squares Right Angle Clamps, Clamping Squares for Woodworking Cabinet Clamp Corner Clamps Aluminum Alloy L Type Carpenter Tool for Cabinets, Picture Frame 7.1inch
Asin: B09BMS8RM7 | Model: 2Pack 7.1'' | PartNumber: 2Pack 7.1''
【Furniture Widely Application】Precision Positioning Squares Carpenter Tool Is Suitable For Diy Assembling Boxes, Drawers, Cabinets, Frames And Other Furnitures. Long L Bolt Can Maintain A Perfect Square While Assembling Any Box Or Frame. Right Angle Clamp Jig Also Can Be Used For Processing Outside Angel Corners, Metal Right Angels, Welding And Other Professional Operations..
Corner Clamps For Woodworking Set Carpenter Tools Corner Clamps 90 Degree Right Angle Clamps.
Large 90 Degree Clamping Squares For Woodworking Cabinet.
18 X 18Cm Right Angle Corner Clamps Cabinet Clamp For Woodworking.
【Easy Install And Use】Most Of The Material All Can Be Quickly Flattened And Fixed With A Set 90 Degree Clamps, Which Can Be Easy To Work And Not Damage The Cutting Edges. Cabinet Clamps Set Is Ideal For Woodworking With Beveled Edges..
2 Pack Red Anodized Right Angle Clamps Tools For Woodworking.
【Sturdy & Accurate】Cabinet Clamps For Installing Cabinets Adopt Surface Treatment-Anodized, Carefully Manufactured Which Is Durable And Resistant To Corrosion. Picture Frame Clamps Woodworking Tool Is Strong And Accurate, Easy To Clamp And Don’T Stick On The Steel..
7.1Inch Solid Aluminum Alloy L-Type 90 Degree Positioning Squares.
【Professional Woodworking Tool】Aluminum Corner Clamps For Woodworking Can Work With Clamping Tool, To Check And Position The Corner For Wood Board Jointing To Gluing Up Or Welding At A Right Angle. 90 Degree Corner Clamp Tool Is Pretty Practical To Make Your Woodworking Project Easier..
Features
- 2023 UPGRADE SIZE Plus Size Square(7.1INCH and 180MM) + Plus Size Clamps Design(5.15 INCH); Compared to short steel L rods in the market. The L bolt of our large Clamping Square plus & csp clamps is long enough to get a better grab on the material, fine for small items and also for larger ones
- PROFESSIONAL WOODWORKING TOOL Aluminum corner clamps for woodworking can work with clamping tool, to check and position the corner for wood board jointing to gluing up or welding at a right angle. 90 degree corner clamp tool is pretty practical to make your woodworking project easier.
- FURNITURE WIDELY APPLICATION Precision positioning squares carpenter tool is suitable for DIY assembling boxes, drawers, cabinets, frames and other furnitures. Long L bolt can maintain a perfect square while assembling any box or frame. Right angle clamp jig also can be used for processing outside angel corners, metal right angels, welding and other professional operations.
- STURDY & ACCURATE Cabinet clamps for installing cabinets adopt surface treatment-anodized, carefully manufactured which is durable and resistant to corrosion. Picture frame clamps woodworking tool is strong and accurate, easy to clamp and don t stick on the steel.
- EASY INSTALL AND USE Most of the material all can be quickly flattened and fixed with a set 90 degree clamps, which can be easy to work and not damage the cutting edges. Cabinet clamps set is ideal for woodworking with beveled edges.
- 2 pack red anodized right angle clamps tools for woodworking
- large 90 degree clamping squares for woodworking cabinet
- 18 x 18cm right angle corner clamps cabinet clamp for woodworking
- 7.1inch solid aluminum alloy L-Type 90 degree positioning squares
- Corner clamps for woodworking set Carpenter tools corner clamps 90 degree right angle clamps
- See more on Amazon...
Brand: WenCrew | Manufacturer: WenCrew
Dimensions: 1.18 x 0.39 x 0.79 inches
See On Amazon #3
INCRA MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop
Asin: B0007UQ2EQ | Model: MITER1000SE | PartNumber: MITER1000SE | Ean: 0751922010027, 0751922200114, 0784497252004 | UPC: 751922200114, 751922010027, 784497252004
Patented Glidelock Miter Bar With 6 Expansion Points For Quick Repeats.
Incra Flip Shop Stop-Fence Positioner For Optimal Mitering Accuracy.
18- To 31-Inch Telescoping Incremental Miter Fence For Handling A Variety Of Stock Widths.
41 Laser Cut V-Stops For Extreme Accuracy At All Popular Angles.
Features
- Engraved stainless steel primary scale for precision accuracy
- 41 laser cut V-stops for extreme accuracy at all popular angles
- Patented GlideLOCK miter bar with 6 expansion points for quick repeats
- 18- to 31-inch telescoping incremental miter fence for handling a variety of stock widths
- INCRA Flip Shop Stop-Fence Positioner for optimal mitering accuracy
- See more on Amazon...
Brand: INCRA | Manufacturer: Incra
Dimensions: 4.50 x 18.25 x 18.25 inches | Weight: 8.26 Pounds
Warranty: 1 year replacement warranty
See On Amazon #4
VEVOR Precision Miter Gauge, 18" Aluminum Table Saw Miter Gauge w/ 60 Degree Angled Ends for Max. Stock Support and a Repetitive Cut Flip Stop, Miter Saw Fence w/Laser Marking Scale
Asin: B09MHFSPXX | Model: 18 inch Miter Saw Fence | PartNumber: 18 inch Miter Saw Fence | Ean: 0840281596508 | UPC: 840281596508
Premium Sturdy Construction: This Woodworking Tool Is Made Of Aluminum Alloy, Ensuring Its Durability And Sturdiness. The Steel Miter Bar Is Equipped With A Removable Metal Retaining Disc To Prevent Accidental Lifting..
Wide Application: The Table Saw Miter Can Improve The Safety And Accuracy Of The Table Saw And The Router Table. It Also Can Be Used For Router Tables And Jointers. Miter Gauge Fence System Is Currently A Must-Have For Every Family..
Simple & Secure Operation: An Adjusting Screw And Guide Wheel Are Added In The Middle, Which Is More Convenient To Insert Into The Slot Hole And Fix The Seat. The Miter Gauges Are Flat Without Burr, Secure, And Hands-Free..
Compatible Standeded Slot: Our Table Saw Sled Is Suitable For A Standard 0.75 X 0.38-Inch Miter Slot. Laser Marking Technology Is Friction-Resistance To Ensure Accuracy. It Is An Economical Solution For Your Table Saw Crosscutting Needs. The Adjustable, Solid Aluminum Head Is Machined With 11 Positive Stop Holes. 1 Hole Is At 90 Degrees While The 5 Holes On Both Sides Are At 10, 22.5, 30, 45, 60 And 90 Degrees..
Features
- Precise Angle Cutting: This table saw accessory is 0.04 inch / 1 mm high precision. Metric and imperial scale makes your work more convenient. Additional trim blocks raises working efficiency. Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle.
- Compatible Standeded Slot: Our table saw sled is suitable for a standard 0.75 x 0.38-inch miter slot. Laser marking technology is friction-resistance to ensure accuracy. It is an economical solution for your table saw crosscutting needs. The adjustable, solid aluminum head is machined with 11 positive stop holes. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 22.5, 30, 45, 60 and 90 degrees.
- Premium Sturdy Construction: This woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting.
- Simple & Secure Operation: An adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix the seat. The miter gauges are flat without burr, secure, and hands-free.
- Wide Application: The table saw miter can improve the safety and accuracy of the table saw and the router table. It also can be used for router tables and jointers. Miter gauge fence system is currently a must-have for every family.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 4.70 x 22.40 x 5.10 inches | Weight: 4.00 pounds
See On Amazon #5
POWERTEC Universal Table Saw Miter Gauge and Aluminum Miter Bar, 27 Angle Stops Miter Gauge, Works w/Table Saws, Band Saw, Router Table (71142)
Asin: B07TJX3FB9 | Model: 71142 | PartNumber: 71142 | Ean: 0843441104186 | UPC: 843441104186
Features: A Lightweight Design With A Durable Laser-Cut Aluminum Construction, Large Gauge Handle, Universal Fence Mounting Bracket, Pivoting Locking Mechanism, A Removal Plate That Allows The Miter Gauge To Be Used With T-Slotted And Non T-Slotted Miter Slots, And Adjustable Expansion Discs That Remove All Side Play From The Bar, Creating A Perfect Fit..
Universal Design: Works With Most Contractor Style, Full Sized Saws, Or Tools With Standard Miter Slots (3/4” Width X 3/8” Depth) With Or Without T-Slots, Making It Compatible With Popular Brand Table Saws, Band Saws, Router Tables, Disk And Belt Sanders. Please Note : Will Not Work With Smaller Saws Or Tool With 5/8” Miter Slots..
Precision: Angle Guide With 27 Total Locking Stops In 5 Degree Increments Over A Full 180-Degree Range, And Allows For Plus Or Minus 60-Degree Range Miter Cuts.
Function: A High Performance Woodworking Angle Tool That Possesses A Miter Guide Which Mounts Into The Miter Slots Of Your Table Saw (Band Saws And Other Applications) And Then Guides The Miter Gauge Parallel To The Blade For High Precision Angled And Crosscuts.
Features
- INCLUDES: (1) Miter Gauge for Table Saw
- FUNCTION: A high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts
- FEATURES: A lightweight design with a durable laser-cut aluminum construction, large gauge handle, universal fence mounting bracket, pivoting locking mechanism, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit.
- PRECISION: Angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts
- UNIVERSAL DESIGN: Works with most Contractor style, full sized saws, or tools with standard miter slots (3/4 width x 3/8 depth) with or without T-slots, making it compatible with popular brand table saws, band saws, router tables, disk and belt sanders. PLEASE NOTE : will not work with smaller saws or tool with 5/8 miter slots.
- See more on Amazon...
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 2.50 x 18.94 x 4.75 inches | Weight: 2.58 Pounds
See On Amazon #6
POWERTEC 71391 Table Saw Precision Miter Gauge System w/ 27 Angle Stops and 3/4 x 3/8 T-Slotted Miter Bar w/Removable T-Slot Plate; Includes 24 x 3 Multi T Track Fence w/Scale, T-track Flip Stop
Asin: B07WR1V693 | Model: 71391 | PartNumber: 71391 | Ean: 0843441104193 | UPC: 843441104193
High Precision Miter Gauge: Features 27 Angle Indexing Stops With 1-Degree Step Spacing And Positive Stops At 0°, 10°, 22½°, 30°And 45°And Nine Others, Both Left And Right (Works In Standard 3/4” X 3/8” Miter Slot, With Or Without T-Slots, But Will Not Work With Smaller Saws Or Tool With 5/8” Miter Slots.).
Miter Saw Flip Stop: Delivers Exceptional Cut-Length Control, With A Toolless Locking Mechanism And Adjustable Settings To Quick Change To The Left Or Right Side Of The Blade.
Multi-Track Miter Fence: Smooth, Built-In Laser Engraved Measuring Scale, Extruded Aluminum Profile With A Universal Design That Accepts Accept 1/4"-20 Hex Bots, 1/4” T-Bolts And 5/16” T- Bolts, And T-Track Accessories.
Function: Cost Effective 3-Piece Set Designed To Give You Everything You Need To Produce Higher Precision Cuts (Including Cross Cutting) While With Quick And Accurate Project Results.
Features
- Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop
- Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while with quick and accurate project results
- High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0 , 10 , 22 , 30 and 45 and nine others, both left and right (Works in standard 3/4 x 3/8 miter slot, with or without t-slots, but will not work with smaller saws or tool with 5/8 miter slots.)
- Multi-track miter fence: smooth, built-in laser engraved measuring scale, extruded aluminum profile with a universal design that accepts accept 1/4-20 hex Bots, 1/4 t-bolts and 5/16 T- bolts, and T-track accessories
- Miter saw flip stop: delivers exceptional cut-length control, with a toolless locking mechanism and adjustable settings to quick change to the left or right side of the blade
- See more on Amazon...
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 25.00 x 4.62 x 3.37 Inches | Weight: 5.75 Pounds
See On Amazon #7
POWERTEC 71568 Miter T-Track with Miter T-Bar, 32-Inch
Asin: B08MPY85F6 | Model: 71568 | PartNumber: 71568 | Ean: 0843441107491 | UPC: 843441107491
Applications: Ideal For Benchtop Table Saws, Router Tables, Band Saws, And Other Woodworking Shop Projects That Require A Versatile Set Of Miter Track Channels.
Size Specifications: T-Track Works With ¾” X 3/8” Miter Gauges, With Or Without T-Slot Plate; T- Bars Fit Perfectly Into T-Slotted Miter Gauge Slots - The 32" Length Can Be Custom Cut To Suit Your Individual Project Requirements.
Design: Both Anodized Aluminum Extrusions Possess A Heavy Duty Construction, And Feature A Center Guide Track Perfect For Drilling And Project Alignment - The Miter T-Bar Slides Seamlessly Into The Miter Track Or T-Slot.
Function: The Powertec Miter Track And Bar Set Is Designed To Help Build An Assortment Of Sliding Jigs And Fixtures, While Enhancing Overall Bench Top Table Tool Precision And Functionality..
Features
- INCLUDES: T-Track with T-Slot Miter Bar
- FUNCTION: The POWERTEC Miter track and bar set is designed to help build an assortment of sliding jigs and fixtures, while enhancing overall bench top table tool precision and functionality.
- APPLICATIONS: Ideal for benchtop table saws, router tables, band saws, and other woodworking shop projects that require a versatile set of miter track channels
- DESIGN: Both anodized aluminum extrusions possess a heavy duty construction, and feature a center guide track perfect for drilling and project alignment - The miter t-bar slides seamlessly into the miter track or t-slot
- SIZE SPECIFICATIONS: T-track works with x 3/8 miter gauges, with or without t-slot plate; t- bars fit perfectly into t-slotted miter gauge slots - The 32 length can be custom cut to suit your individual project requirements
- See more on Amazon...
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 0.39 x 32.09 x 1.22 inches
See On Amazon #8
INCRA Miter1000/HD Miter Gauge
Asin: B001RCTTGG | Model: MITER1000/HD | PartNumber: MITER1000/HD | Ean: 0751922200121, 7241870535381, 0784497245143, 0732454152911, 0735090512415 | UPC: 751922200121, 732454152911, 735090512415, 784497245143
Heavy Duty Machined And Laser Cut Components. Patented Incremental Flip Shop Stop For Prefect Cut Length Control.
Removable Retaining Clip For T-Slot Miter Channels.
1/10Th-Degree Vernier Cursor, Telescoping Fence Expands From 18-Inch To 31-Inch Overall Length.
Patented Glide Lock Miter Bar Expansion Disks Provide A Perfect Fit.
Features
- 180 Angle LOCK Indexing Stops with 1-Degree Step Spacing and Special Stops at 22-1/2-Degree
- Patented Glide LOCK Miter Bar Expansion Disks Provide a Perfect Fit
- Heavy Duty Machined and Laser Cut Components. Patented Incremental Flip Shop Stop for Prefect Cut Length Control
- 1/10th-Degree Vernier Cursor, Telescoping Fence Expands from 18-Inch to 31-Inch Overall Length
- Removable Retaining Clip for T-Slot Miter Channels
- See more on Amazon...
Brand: INCRA | Manufacturer: Incra
Dimensions: 3.60 x 21.00 x 7.80 inches | Weight: 7.71 pounds
Warranty: See Manufacturer's Website for Details.
See On Amazon #9
Microjig ZP750-B2S2 Zeroplay Miter Bar 2-Pack - Best Seller (New, Upgraded)
Asin: B0BH7WHX65 | Model: ZP750-B2S2 | PartNumber: ZP750-B2S2 | Ean: 0815267011443 | UPC: 815267011443
Calibrate Your Miter Bar Quickly: The Zeroplay Miter Bars Are Adjusted To Fit The Miter Slot While It Is Attached To Your Sled, Allowing You To Get The Best Fit Possible. Just Set, Test, And Adjust If Needed, Then Begin Using Your Sled. The Two Halves Of The Zeroplay Expand To Fit The Slot, Providing Full Contact Along Both Edges Of The Bar.
Speed And Versatility: Miter Bars Can Be Used In Tandem For Longer Sleds Or To Engage Both Miter Slots At The Same Time. Retrofit To Your Existing Sled And Move Easily From Jig To Jig.
Top-Down Installation: Miter Bar Secures The Sled From The Top, Allowing You To Square It To The Blade Without Taking It Off The Table.
Build Accurate Sleds Fast: The Zeroplay Miter Bars Take Sleds To The Next Level Of Precision. The Miter Bars Are Adjusted To Fit Your Miter Slots From Above The Sled, Making The Process As Easy And Precise As Possible. The Zeroplay Expands To Engage Both Edges Of The Miter Slot Along Their Entire Length.
Features
- Zeroplay Upgraded Miter Bars: The Microjig ZP750-B2S2 Zeroplay Upgraded Miter Bars are ideal for table saws, router tables, and band saws. The two precision bars allow for building larger sleds
- Build Accurate Sleds Fast: The ZeroPlay Miter Bars take sleds to the next level of precision. The miter bars are adjusted to fit your miter slots from above the sled, making the process as easy and precise as possible. The ZeroPlay expands to engage both edges of the miter slot along their entire length
- Calibrate Your Miter Bar Quickly: The ZeroPlay Miter Bars are adjusted to fit the miter slot while it is attached to your sled, allowing you to get the best fit possible. Just set, test, and adjust if needed, then begin using your sled. The two halves of the ZeroPlay expand to fit the slot, providing full contact along both edges of the bar
- Top-Down Installation: Miter Bar secures the sled from the top, allowing you to square it to the blade without taking it off the table
- Speed and Versatility: Miter Bars can be used in tandem for longer sleds or to engage both miter slots at the same time. Retrofit to your existing sled and move easily from jig to jig
- See more on Amazon...
Brand: MICRO JIG | Manufacturer: Microjig
Dimensions: 1.50 x 11.00 x 4.40 inches
Warranty: Extended 3-Year Warranty from Authorized Resellers
See On Amazon #10
KETIPED Aluminium Alloy Miter Bar Clamping Tool Slider Table Saw Gauge Rod T-Slot Track Bar Rail for Router Tables and Woodworking,300mm-Blue
Asin: B0CC52TX29 | Ean: 0755673909166 | UPC: 755673909166
👍〖Product Features〗:There Are 4*M6 Screw Holes On The 300Mm Miter Bar, Which Can Connect Most Woodworking Workpieces And Fixtures. There Is A Pulley With A Diameter Of 22.8Mm At Both Ends Of The Miter Bar, So That The Miter Bar Can Easily Slide On The T-Track. During Use Will Not Fall Off. Meet The Needs Of Daily Carpentry Work..
👍〖Package Includes〗:The Package Contains A 300Mm Miter Bar.If There Is Any Problem With The Item You Received, Please Contact Us For A Replacement. We Will Try Our Best To Provide You With Satisfactory..
👍〖Versatile Application〗:Can Be Used To Build Various Fixtures On Table Saw Tables, Such As Miter Sledges. Commonly Used On Radial Saws, Countertops, Drill Presses, And A Variety Of Other Construction Equipment. Beautifully Designed, Easy To Use And Powerful..
👍〖Product Design〗:The T-Slot Track Bar Is 300Mm (11.8In) Long, 19Mm (0.75In) Wide, 9.5Mm (0.37In) Thick, And The Diameter Of The Two Pulleys Is 22.8Mm (0.9In)..
Features
- Product Material :This Miter Bar is made of high-quality aluminum alloy material, and the surface is anodized to make it harder and wear-resistant, with good insulation performance and long service life.
- Product Design :The T-Slot Track Bar is 300mm (11.8in) long, 19mm (0.75in) wide, 9.5mm (0.37in) thick, and the diameter of the two pulleys is 22.8mm (0.9in).
- Product Features :There are 4*M6 screw holes on the 300mm Miter Bar, which can connect most woodworking workpieces and fixtures. There is a pulley with a diameter of 22.8mm at both ends of the Miter Bar, so that the Miter Bar can easily slide on the t-track. During use will not fall off. Meet the needs of daily carpentry work.
- Versatile Application :Can be used to build various fixtures on table saw tables, such as miter sledges. Commonly used on radial saws, countertops, drill presses, and a variety of other construction equipment. Beautifully designed, easy to use and powerful.
- Package Includes :The package contains a 300mm Miter Bar.If there is any problem with the item you received, please contact us for a replacement. We will try our best to provide you with satisfactory.
- See more on Amazon...
Brand: KETIPED | Manufacturer: KETIPED
Dimensions: 0.38 x 11.81 x 0.75 inches
See On Amazon #11
Fulton Precision Miter Gauge with a Standard Slot (3/4 x 3/8 ) Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc
Asin: B072WBLNDD | Model: 1250 | PartNumber: 1250 | Ean: 0810948015604 | UPC: 810948015604
To Adjust The Head You Simply Loosen The Post Knob Handle, Pull The Spring Loaded Indexing Pin Outward, Rotate The Head To The Desired Position, Release The Pin And Lock Into Place By Tightening The Post Knob Handle. The Aluminum Head Has Two ¼” X ½” Slots Milled Into It For Mounting A Miter Fence If So Desired. The Slots Are Approximately 1-1/8” From The Base Of The Miter Gauge Head..
The Steel Miter Bar Is Equipped With A Metal, Removable Retaining Disc That Measures 7/8” In Diameter And Is Just Shy Of 1/8” To Fit Into To The “T” Slot To Prevent Accidental Lifting When Feeding Your Stock Through. If Your Saw Does Not Have A “T” Slot, You Can Remove The Disc. The Steel Miter Bar Is Also Equipped With Spring Loaded, Adjustable Plungers On The Side Of The Bar. The Plungers Can Be Adjusted With The Provide Hex Key Wrench In Or Out To Provide You With The Ideal Fit..
The Head Is Mounted To A Solid Steel Miter Bar That Measure 18” In Length And Is .354” Thick By .730” Wide. Standard Miter Slots Are 3/4” X 3/8” With A 1/8” “T” Slot (Slight Variances From Brand To Brand) Running The Length On The Bottom Of The Slot. The Steel Miter Bar Is Equipped With A Metal, Removable Retaining Disc That Measures 7/8” In Diameter And Is Just Shy Of 1/8” To Fit Into To The “T” Slot To Prevent Accidental Lifting When Feeding Your Stock Through..
The .200” Thick, Adjustable, Solid Aluminum Head Is Machined With 13 Positive Stop Holes. 1 Hole Is At 90 Degrees While The 6 Holes On Both Sides Are At 22.5, 30, 45, 60, 67.5 And 90 Degrees. The Positive Stops Are Perfect For Many Woodworking Projects As They Are The Angles That Are Typically Used..
Features
- If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.
- The .200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.
- To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two x slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8 from the base of the miter gauge head.
- The head is mounted to a solid steel miter bar that measure 18 in length and is .354 thick by .730 wide. Standard miter slots are 3/4 x 3/8 with a 1/8 T slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8 in diameter and is just shy of 1/8 to fit into to the T slot to prevent accidental lifting when feeding your stock through.
- The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8 in diameter and is just shy of 1/8 to fit into to the T slot to prevent accidental lifting when feeding your stock through. If your saw does not have a T slot, you can remove the disc. The steel miter bar is also equipped with spring loaded, adjustable plungers on the side of the bar. The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton
Weight: 0.00 pounds
See On Amazon #12
Rockler 24" Aluminum Miter Bar - Aluminum Bar for Smooth-Sliding Action on Table Saws, Router Tables, Workbenches, & More For any Standard 3/4" x 3/8" Miter Slot Accessories for Table Saw
Asin: B01LYZM9GH | Ean: 0798167723039, 0733175262323 | UPC: 733175262323, 798167723039
Great For? Our Miter Slider Bar Is Great For Shop-Made Crosscut Jigs, Cutoff Tables, Taper Jigs, And More. Available Individually In 18", 24", And 36" Lengths..
Extremely Durable: Our Miter Bars For The Table Saw Are Made Of High-Quality Aluminum Alloy That Will Be Strong And Reliable For Several Years..
Easy Assemble: Our Miter Bar Slider Makes It Very Easy To Construct That Ideal Jig Without Dealing With The Wood Runners And The Swelling Issues. This Table Saw Miter Bar Has 1/4-20 Threaded Holes For Easy Attachment.
Adjustment Screws: This Solid Aluminum Miter Bar Has Nylon Set Screws In The Miter Bar That Adjust In Or Out For A Perfect Fit In Any Standard 3/4" X 3/8" Miter Slot..
Features
- 24" Aluminum Miter Bar: The Rockler miter track bar allows you to set up your jigs for smooth-sliding action on table saws, router tables, bandsaws, and more! These aluminum table saw miter bars won't warp, swell or shrink like wooden runners.
- Adjustment Screws: This solid aluminum miter bar has nylon set screws in the miter bar that adjust in or out for a perfect fit in any standard 3/4 x 3/8 miter slot.
- Great For? Our miter slider bar is great for shop-made crosscut jigs, cutoff tables, taper jigs, and more. Available individually in 18, 24, and 36 lengths.
- Easy Assemble: Our miter bar slider makes it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues. This table saw miter bar has 1/4-20 threaded holes for easy attachment
- Extremely Durable: Our miter bars for the table saw are made of high-quality aluminum alloy that will be strong and reliable for several years.
- See more on Amazon...
Brand: ROCKLER | Manufacturer: Rockler Woodworking and Hardware
See On Amazon #13
4 Pcs UHMW Precision Milled Bar for Jigs Crosscut Sled for Table Saw Sled Fixtures or Miter Slots (size 3/4" x 3/8") Miter Bar Slider Table Saw Gauge Rod for Router Table Bandsaws (3/4 x 3/8 x 17'')
Asin: B0C2TGXDCQ
Withstand Friction Function: The Material Of Miter Bar Withstands Friction Better Than Wood And Lower Quality Or Less Dense Plastics; In This Way, You Can Apply It With Confidence And Giving A Nice Shopping Experience.
Wide Application: Uhmw Makes Jigs And Fixtures For Your Table Saws, Routers, And More, Ideal For Sleds Where Repetitive Sliding Often Occurs; We Also Have Screws For The Miter Bars For Table Saw That Need To Be Drilled For Installation.
Stable And Excellent Impact Strength: Uhmw Does Not Expand Or Contract Like Wood, Does Not Absorb Moisture And Will Not Swell Over Time With Exposure; The Crosscut Sled Can Be Exposed At Low Temperature.
Smooth Surface To Hold: The Table Saw Sled Leaves No Residue, And The Uhmw Is A Linear Polyethylene Material, Very Durable And Can Be Applied Over And Over Again; No Need To Clean Up After Use, Saving Your Energy.
Features
- What You Will Receive: there are 4 pieces of saw rail track measuring about3/4 x 3/8 x 17'', ideal for table saws, band saws or routers; You can share it with your partners to use together, easy to operate
- Smooth Surface to Hold: the table saw sled leaves no residue, and the UHMW is a linear polyethylene material, very durable and can be applied over and over again; No need to clean up after use, saving your energy
- Withstand Friction Function: the material of miter bar withstands friction better than wood and lower quality or less dense plastics; In this way, you can apply it with confidence and giving a nice shopping experience
- Stable and Excellent Impact Strength: UHMW does not expand or contract like wood, does not absorb moisture and will not swell over time with exposure; The crosscut sled can be exposed at low temperature
- Wide Application: UHMW makes jigs and fixtures for your table saws, routers, and more, ideal for sleds where repetitive sliding often occurs; We also have screws for the miter bars for table saw that need to be drilled for installation
- See more on Amazon...
Brand: Roowest | Manufacturer: Roowest
See On Amazon #14
Delta Deluxe Miter Gauge Model 34-929 , Black
Asin: B00I33XUKS | Model: 34-929 | PartNumber: 34-929 | Ean: 0847962005199 | UPC: 847962005199
This Is A Manufacturer Substitution. Part May Differ In Appearance But Is A Functional Equivalent To Prior Parts 34-895/1087652, 50-864/Pm-1978, And 34-928..
The 18-3/8" Long Guide Bar Offers Adjustment Screws To Custom Fit The Bar To The Miter Slot Of Your Machine And Eliminate Any Side-To-Side Play..
Genuine Original Equipment Manufacturer (Oem) Part. Compatible Brands: Delta.
The Deluxe Miter Gauge Is Accurately Constructed And Equipped With Adjustable Positive Stops At 90, 15, 22.5, 30, 45, And 60, Degrees Left And Right..
Features
- Fits table saws, shapers, band saws and other machines with a 3/8" x 3/4" miter slot-Real little saws may not fit-Guide Bar Length: 18-3/8"
- The Deluxe Miter Gauge is accurately constructed and equipped with adjustable positive stops at 90, 15, 22.5, 30, 45, and 60, degrees left and right.
- This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts 34-895/1087652, 50-864/PM-1978, and 34-928.
- Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Delta
- The 18-3/8 long guide bar offers adjustment screws to custom fit the bar to the miter slot of your machine and eliminate any side-to-side play.
- See more on Amazon...
Brand: Delta | Manufacturer: Delta Power Equipment Corporation
Dimensions: 2.88 x 20.25 x 7.75 inches
See On Amazon #15
Microjig ZP750-B1 Zeroplay Miter Bar 1-Pack (New, Upgraded)
Asin: B0BH7CK9ZF | Model: ZP750-B1 | PartNumber: ZP750-B1 | Ean: 0815267011429 | UPC: 815267011429
Build Your Own Unique Jig Or Jigs With Included Plan.
Designed In The Usa By Microjig.
Extended 3-Year Warranty, 100% Satisfaction Guaranteed.
Calibrate And Adjust Bar Thickness While Attached To Sled.
Retro-Fit Your Existing Cross-Cut Jigs For Improved Precision.
Fits Standard (3/4" X 3/8") T Miter Slots, Shopsmith And General Miter Tracks.
Easily Square Jig To The Blade Adjustment While Securing Through The Top Of The Sled.
Features
- Build table saw sleds fast!
- Easily square jig to the blade adjustment while securing through the top of the sled
- Build your own unique jig or jigs with included plan
- Fits standard (3/4 x 3/8) T miter slots, ShopSmith and General miter tracks
- Calibrate and adjust bar thickness while attached to sled
- Retro-Fit your existing cross-cut jigs for improved precision
- Designed in the USA by Microjig
- Extended 3-Year Warranty, 100% satisfaction guaranteed
- See more on Amazon...
Brand: MICRO JIG | Manufacturer: Microjig
Warranty: Extended 3-Year Warranty from Authorized Resellers
See On Amazon #16
Peachtree Woodworking 19 inch Precision Aluminum Miter Bar Rail Runner w/Adjustable Spring Loaded Plungers DIY Table Saw Crosscut Sleds Jigs Works w/ 3/4 by 3/8 inch Miter Slots Mounting Hardware
Asin: B0B2G3H688 | Model: 4783 | PartNumber: 4783 | Ean: 0817918023072 | UPC: 817918023072
Not Only Is The Aluminum Miter Bar Adjustable, Its Easy To Mount! You Can Mount The Bar From The Top Of Your Sled, Jig Or Fixture Platform Or Base, Or You Can Mount It From The Bottom. There Are Threaded Holes Along The Length Of The Bar For Mounting The Bar Using 1/4 Inch By 20 Tpi Machine Screws (Included). There Are Also Counter Sunk Holes On The Bar To Mount The Bar Using #8 Wood Screws (Included)..
The Bar Is Approximately 19 Inches Long And Will Fit Into Standard (3/4 X 3/8 Inch) Miter T Slots And U-Shaped Miter Slots. Non-Standard Slots Found On Some Job Site Style Table Saws And Other Small Machinery Will Not Accept This Bar Due To The Non-Standard Slot Dimensions. We Recommend That You Measure Your Miter Slot Before Placing Your Order..
Once You Mount The Bars To Your Sled, Jig Or Fixture You Are Sure To Feel The Difference. This Is Especially True When You First Run The Bars Through Your Miter Slots. The Smooth Sliding Action Is Perfect For Crosscut Sleds, Miter Angle Jigs, Shop Made Coping Sleds And A Whole Lot More! Using Two Bars (Only One Is Included) For Even More Stability Works Exceptionally Well..
When Building Sleds, Jigs And Fixtures, One Of The Most Important Aspects Is To Achieve A Smooth Sliding Action Without Side To Side Play. The 19 Inch Precision Aluminum Miter Bar Does Both With Its Solid Aluminum Bar And 5 Adjustable Spring Loaded Plungers. The Plungers Can Be Adjusted With The Included Hex Key Wrench For Just The Right Fit..
Features
- Build your next table saw sled, router table jig or band saw fixture to operate with a smooth sliding action using our 19 inch Precision Aluminum Miter Bar! Attach the aluminum bar to most any type of sled, jig or fixture that is to be used with a 3/4 inch (19mm) by 3/8 inch (9mm) miter slot. Using our aluminum bar versus plastic or wood gives your sled, jig or fixture more strength and stability and it won t bend or warp.
- When building sleds, jigs and fixtures, one of the most important aspects is to achieve a smooth sliding action without side to side play. The 19 inch Precision Aluminum Miter Bar does both with its solid aluminum bar and 5 adjustable spring loaded plungers. The plungers can be adjusted with the included hex key wrench for just the right fit.
- Not only is the Aluminum Miter Bar adjustable, its easy to mount! You can mount the bar from the top of your sled, jig or fixture platform or base, or you can mount it from the bottom. There are threaded holes along the length of the bar for mounting the bar using 1/4 inch by 20 tpi machine screws (included). There are also counter sunk holes on the bar to mount the bar using #8 wood screws (included).
- Once you mount the bars to your sled, jig or fixture you are sure to feel the difference. This is especially true when you first run the bars through your miter slots. The smooth sliding action is perfect for crosscut sleds, miter angle jigs, shop made coping sleds and a whole lot more! Using two bars (only one is included) for even more stability works exceptionally well.
- The bar is approximately 19 inches long and will fit into standard (3/4 x 3/8 inch) miter t slots and u-shaped miter slots. Non-standard slots found on some job site style table saws and other small machinery will NOT accept this bar due to the non-standard slot dimensions. We recommend that you measure your miter slot before placing your order.
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #17
Incra MITER1000/18T Miter 1000 Table Saw Miter-gauge
Asin: B000051WSE | Model: MITER1000/18T | PartNumber: MITER1000/18T | Ean: 0751922200107 | UPC: 751922200107
1 Angle Stop With Indexed Stops Every 5-Degrees.
6 Expansion Points That Allow For Adjustments To Both Sides Of The Bar For Zero Side Play.
Precision Angle Indexing Teeth.
Solid-Steel Laser Cut Protracter Head And Gold Anodized Track Fence.
Features
- Table saw that delivers perfect miter cuts the first time
- Solid-steel laser cut protracter head and gold anodized Track Fence
- 1 angle stop with indexed stops every 5-degrees
- Precision angle indexing teeth
- 6 expansion points that allow for adjustments to both sides of the bar for ZERO side play
- See more on Amazon...
Brand: INCRA | Manufacturer: Incra
Dimensions: 4.29 x 21.00 x 8.00 inches | Weight: 5.90 Pounds
See On Amazon #18
POWERTEC 71146 Miter T-Bar, 48-Inch, grey
Asin: B07JYD4H52 | Model: 71146 | PartNumber: 71146 | Ean: 0843441101512 | UPC: 843441101512
Build: This Aluminum T-Bar Extrusion Possesses A Thick, Heavy Duty Exterior That Won’T Warp Or Alter In Shape, And Is Precision Machined To Accommodate A Variety Of Woodworking Applications, Ensuring Long Term Durability.
Customizable: 48 Inch Profile Can Be Custom Cut To Suit Your Individual Project Needs And Specifications.
Versatile: A Perfect Fit For All 3/4" X 3/8" T-Slotted -Miter Slots (And Standard Table Saws With T- Slotted Miter Tracks), Making This Miter Bar Ideal For Benchtop Table-Saw Extensions, Drill Press, Router Table, And Band-Saw Table Applications. Also Works With For Powertec 71167, Miter T-Track, For Creating Extension, Jigs And Other Woodworking Requirements..
Function: Ideal For Creating Customized High-Utility Sliding Jigs, Sleds And Fixtures, While Featuring A Functional Design That Prevents Play (Lifting) For Safer, High Precision Accuracy.
Features
- INCLUDES: (1) 48" Miter T-Bar
- FUNCTION: Ideal for creating customized high-utility sliding jigs, sleds and fixtures, while featuring a functional design that prevents play (lifting) for safer, high precision accuracy
- BUILD: This aluminum t-bar extrusion possesses a thick, heavy duty exterior that won t warp or alter in shape, and is precision machined to accommodate a variety of woodworking applications, ensuring long term durability
- VERSATILE: A perfect fit for all 3/4 x 3/8 t-slotted -miter slots (and standard table saws with t- slotted miter tracks), making this miter bar ideal for benchtop table-saw extensions, drill press, router table, and band-saw table applications. Also works with for Powertec 71167, Miter T-Track, for creating extension, jigs and other woodworking requirements.
- CUSTOMIZABLE: 48 inch profile can be custom cut to suit your individual project needs and specifications
- See more on Amazon...
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 0.50 x 48.00 x 1.00 inches
See On Amazon #19
POWERTEC 71567 Miter T-Bar, 32-Inch
Asin: B08MPNNB43 | Model: 71567 | PartNumber: 71567 | Ean: 0843441107484 | UPC: 843441107484
Build: This Aluminum T-Bar Extrusion Possesses A Thick, Heavy Duty Exterior That Won’T Warp Or Alter In Shape, And Is Precision Machined To Accommodate A Variety Of Woodworking Applications, Ensuring Long Term Durability.
Customizable: 32 Inch Profile Can Be Custom Cut To Suit Your Individual Project Needs And Specifications.
Versatile: A Perfect Fit For All 3/4” X 3/8” T-Slotted -Miter Slots (And Standard Table Saws With T-Slotted Miter Tracks), Making This Miter Bar Ideal For Benchtop Table-Saw Extensions, Drill Press, Router Table, And Band-Saw Table Applications. Also Works With For Powertec 71566, Miter T-Track, For Creating Extension, Jigs And Other Woodworking Requirements..
Function: Ideal For Creating Customized High-Utility Sliding Jigs, Sleds And Fixtures, While Featuring A Functional Design That Prevents Play (Lifting) For Safer, High Precision Accuracy.
Features
- INCLUDES: (1) 32 Miter T-Bar
- FUNCTION: Ideal for creating customized high-utility sliding jigs, sleds and fixtures, while featuring a functional design that prevents play (lifting) for safer, high precision accuracy
- BUILD: This aluminum t-bar extrusion possesses a thick, heavy duty exterior that won t warp or alter in shape, and is precision machined to accommodate a variety of woodworking applications, ensuring long term durability
- VERSATILE: A perfect fit for all 3/4 x 3/8 t-slotted -miter slots (and standard table saws with t-slotted miter tracks), making this miter bar ideal for benchtop table-saw extensions, drill press, router table, and band-saw table applications. Also works with for Powertec 71566, Miter T-Track, for creating extension, jigs and other woodworking requirements.
- CUSTOMIZABLE: 32 inch profile can be custom cut to suit your individual project needs and specifications
- See more on Amazon...
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 0.78 x 34.25 x 1.58 inches
See On Amazon #20
Fdit Aluminium Alloy Miter Bar Rail Miter Guage Bar Slider Table Saw Gauge Rod Wood Working Tool(300mm / 11.81inch)
Asin: B079QWKJFK | Model: Fditfw2vm6brak-02 | PartNumber: Fditfw2vm6brak-02 | Ean: 0663862943146 | UPC: 663862943146
【Fixed Tightly, Sliding Smoothly】These Bars Slide Easily In The Miter Slot When Adjusted Well, There Is No Side To Side Movement At All Which Makes For Very Accurate Cuts..
【Satisfaction Guarantee】We Care For All Customer's Feeling. If This Product Does Not Meet Or Exceed Your Expectations, Please Send It Back For A 100% Refund No Questions Asked..
【Reliable And Credible Quality】Made Of High Quality Aluminium Alloy, It Is Of Strong Strength And Reliable Durability For Several Year Using Without Abusing..
【Installation Is A Breeze】Easy Assembling, Makes It Very Easy To Construct That Ideal Jig Without Dealing With The Wood Runners And The Swelling Issues..
Features
- Please double check size before your purchase Width: Approx. 0.748"; Thickness: Approx.0.374"; Length: Approx.17.7", 11.8" (optional) , It can effectively fit saw table, woodworking table, craftsman table, ryobi 10" table and related saw table.
- Installation is a breeze Easy assembling, makes it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues.
- Fixed tightly, sliding smoothly These bars slide easily in the miter slot when adjusted well, there is no side to side movement at all which makes for very accurate cuts.
- Reliable and credible quality Made of high quality aluminium alloy, it is of strong strength and reliable durability for several year using without abusing.
- Satisfaction guarantee We care for all customer's feeling. If this product does not meet or exceed your expectations, please send it back for a 100% refund no questions asked.
- See more on Amazon...
Brand: Fdit | Manufacturer: Fdit
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.09 Pounds
See On Amazon
Looking For Something Else?
Search