B&P Lamp Brass Plated 10" Fitter-Size Tripod*
Asin: B008UW3VIS | Ean: 0848107029964 | UPC: 848107029964
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Designed By B&P Lamp Supply.
Center Designed To Fit The Top Gallery Of Some Aladdin Brand Burners.
Features
- Brass Plated 10" fitter-size tripod* with 3 1/8" Inside Diameter
- Center designed to fit the top gallery of some Aladdin Brand burners
- Designed by B&P Lamp Supply
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
See On Amazon Similar To B P Lamp Brass Plated
#1
B&P Lamp Antique Brass Socket with Matching Cord Set and Basic Hardware
Asin: B01M0ZKM3H | Model: 30553A | PartNumber: 30553A | Ean: 0848107082594 | UPC: 848107082594
Includes An 18 Gauge 2 Wire Spt-1 Cord Set, 3-Way Turn, Knob Socket, Nut And Threaded Rod.
Works With Regular Bulbs And Led Bulbs.
3-Way Lamp Socket Has An Antique Brass Plated Shell For Standard Size Bulbs; Medium Base Light Socket With 1/8 Ips Socket Cap With Set Screw.
8 Foot Lamp Cord With Matching Molded Polarized Plug.
Features
- Table lamp rewiring kit for vintage lamps or DIY lighting fixtures
- 8 foot lamp cord with matching molded polarized plug
- Includes an 18 gauge 2 wire SPT-1 cord set, 3-way turn, knob socket, nut and threaded rod
- 3-way lamp socket has an antique brass plated shell for standard size bulbs; Medium base light socket with 1/8 IPS socket cap with set screw
- Works with regular bulbs and LED bulbs
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
See On Amazon #2
Pull Chain Lamp Socket Replacement, E26 Standard Threaded Base, Lamp Parts for Table and Floor Lamps, Light Bulb Socket with Pull Chain Lamp Switch, UL Listed, 1 Pack (Antique Brass)
Asin: B0C71KSWMB | Model: Antique Brass-Pull Chain | PartNumber: Antique Brass-Pull Chain | Ean: 6973832862495
【Easy To Use】Just A Few Minutes To Set Up - 1: Thread The Wire Through The Cap Hole; 2: Tying A Ul Knot（Prevent Falling Off); 3: Wind The Wires Around The Screws; 4: Cover The Housing; 5: Screw In A Bulb; Our Sockets Will Come With Instructions To Help You Finish The Process Perfectly..
【Warranty And Service】 90-Day Money Back Guarantee. Please Feel Free To Contact Us If You Have Any Problem With The Ceiling Plate, We Are Committed To Making It Right For You. Quick And Friendly Service Will Be Provided!.
【Wide Applications】Simple Upgrade To Your Old Lamps Or Create A New Lamp, The Pull Chain Socket Would Be A Good Choice. Get This Lamp Socket For Your Diy Table Lamps, Floor Lamps And Industrial Decorative Lamps..
【Lamp Parts Choice】This Lamp Socket Is Compatible With E26 Base. Lamp Socket Comes With A Pull String Where You Can Turn The Lamp On And Off. (Note： This Adapter Is Not 3-Way Switch, Only On/Off Switch.).
Features
- UL Listed Maximum power rating: 250W, 250V, UL certificated, safe to use. The lamp socket is made of sturdy aluminum material in Antique Brass color, the inner insulating cardboard isolates the metal case and the socket.
- Lamp Parts Choice This lamp socket is compatible with e26 base. lamp socket comes with a pull string where you can turn the lamp on and off. (Note This adapter is not 3-way switch, Only ON/OFF switch.)
- Easy to use Just a few minutes to set up - 1: Thread the wire through the cap hole; 2: Tying a ul knot prevent falling off); 3: wind the wires around the screws; 4: Cover the housing; 5: Screw in a bulb; Our sockets will come with instructions to help you finish the process perfectly.
- Wide Applications Simple upgrade to your old lamps or create a new lamp, the pull chain socket would be a good choice. Get this lamp socket for your DIY table lamps, floor lamps and industrial decorative lamps.
- Warranty and Service 90-Day Money Back Guarantee. Please feel free to contact us if you have any problem with the ceiling plate, we are committed to making it right for you. quick and friendly service will be provided!
- See more on Amazon...
Brand: SIXZOONM | Manufacturer: SIXZOONM
Dimensions: 2.65 x 1.20 x 1.20 inches
See On Amazon #3
B&P Lamp Replacement Oil and Kerosene Lamp #2 Size Brass Plated Burner with Reduction Collar and Cotton Lamp Wick | Fits Vintage Oil Lamps | Holds a 3 Inch Base Chimney
Asin: B01GQNS8QW | Model: 5869527927 | PartNumber: 5869527927 | Ean: 0848107029117 | UPC: 848107029117
[Fit And Finish] Functional Burner Fits Many Lamps And Has A 1 3/16 Inch Diameter Threaded Base, Brass Plated Steel Offers Excellent Value And Long Lasting Use.
[Chimney Sold Separately] Designed To Hold A Chimney With A 3 Inch Wide Base.
[Special Design] Burner Has A Fine Threaded Base And May Fit Early American Oil Lamps Without Replacing The Collar.
[Complete Model] Comes With A Cotton Wick And Removable Screw-On Collar.
Features
- [Vintage STYLE] Brass plated #2 oil burner is a perfect replacement for a Vintage or Antique oil lamp
- [Complete Model] Comes with a cotton wick and removable screw-on collar
- [Fit and Finish] Functional burner fits many lamps and has a 1 3/16 inch diameter threaded base, brass plated steel offers excellent value and long lasting use
- [Special Design] Burner has a fine threaded base and may fit early American oil lamps without replacing the collar
- [Chimney Sold Separately] Designed to hold a chimney with a 3 inch wide base
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
Weight: 0.22 pounds
See On Amazon #4
B&P Lamp 3-Way, 4 Position, 2 Circuit Rotary Switch with Removable Knob
Asin: B01LYCHAMM | Model: 40408 | PartNumber: 40408 | Ean: 0848107083089 | UPC: 848107083089
Load 1 On, Load 2 On, Load 1&2 On, Off.
3A-250Vac, 6A-125Vac, 3A,125Vl.
6 Inches Long 18 Gauge Wire Leads.
Features
- 3-way, 4 position, 2 circuit rotary switch with brass knob and 5/8 inch shank
- 6 inches long 18 gauge wire leads
- Load 1 on, load 2 on, load 1&2 on, off
- 3A-250VAC, 6A-125VAC, 3A,125VL
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
Weight: 1.00 Pounds
See On Amazon #5
B&P Lamp 7 Inch Heavy Duty Lamp Harp, Antique Brass Finish
Asin: B008UWARPS | Ean: 0848107029575 | UPC: 848107029575
The Saddle, Or Base, Slips A 1/8Ip (3/8 Inch Diameter).
Works As A Great Replacement For Both Table Lamps And Floor Lamps.
Measures From Bottom Of Harp Base To Top Of Harp Platform (Not Measuring The Threads On Top).
Top Of Harp Accepts 1/4-27 Finial, Which Is The Standard Size For Lamp Harps.
Features
- 7 inch heavy duty lamp harp with a detachable base and antique brass finish
- Top of harp accepts 1/4-27 finial, which is the standard size for lamp harps
- The saddle, or base, slips a 1/8IP (3/8 inch diameter)
- Measures from bottom of harp base to top of harp platform (not measuring the threads on top)
- Works as a great replacement for both table lamps and floor lamps
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
See On Amazon #6
B&P Lamp 6 Inch Regular Weight Lamp Harp, Brass Plated Steel Finish
Asin: B008UW3R0U | Model: 12780 | PartNumber: 12780 | Ean: 0848107029827 | UPC: 848107029827
The Saddle, Or Base, Slips A 1/8Ip (3/8 Inch Diameter).
Works As A Great Replacement For Both Table Lamps And Floor Lamps.
Measures From Bottom Of Harp Base To Top Of Harp Platform (Not Measuring The Threads On Top).
Top Of Harp Accepts 1/4-27 Finial, Which Is The Standard Size For Lamp Harps.
Features
- 6 inch regular weight lamp harp with a detachable base and brass plated steel finish
- Top of harp accepts 1/4-27 finial, which is the standard size for lamp harps
- The saddle, or base, slips a 1/8IP (3/8 inch diameter)
- Measures from bottom of harp base to top of harp platform (not measuring the threads on top)
- Works as a great replacement for both table lamps and floor lamps
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #7
B&P Lamp 9 Inch Regular Weight Lamp Harp, Brass Plated Steel Finish
Asin: B07R5DKYS6 | Model: 12758 | PartNumber: 12758 | Ean: 0848107029650 | UPC: 848107029650
Brand: B&P Lamp | Manufacturer: B&P Lamp
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #8
Mudder 2 Sets Silver Finish Make a Lamp Light Kit, Lamp Wiring Kit with 8 Inch Harp and 3 Way Socket, Make a Amp Kit Complete Lamp Kit for DIY Lamp Design or Repair(Silver)
Asin: B08P5Q7FXW | Model: Mudder-light-1630 | PartNumber: Mudder-light-1630
Durable Material: The Tabletop Lamp Kit Is Made Of Galvanized Steel, Not Easy To Rust, Durable To Use For A Long Time; The Lamp Kit Is Reusable After Being Taken Off.
Easy To Install: The Instruction Is Included For Reference, So You Can Use Your Own Lamp Holder To Diy A Favorite Lamp In A Few Minutes, Or Apply This Lamp Kit To Connect The Old Lamps Again.
Diy Kit: The Lamp Light Kit Is Suitable For Diy Projects At Home Or In The Shop; With This Tabletop Lamp Kit, You Can Repair And Replace The Broken And Aging Lamp Kits And The Old Accessories Out Of Luster.
Practical Design: The Silver-Plated Socket Comes With An Optional Side Hole In The Bottom Cover, So You Don't Have To Worry That The Wire Cannot Pass Through The Lamp Holder And Therefore Affects The Overall Appearance Of The Light.
Features
- Lamp kit includes: 2 pieces of 1/8-IP x 12 inch threaded tube, 2 pieces of 1/8-IP coupling, 2 pieces of 1/8-IP lock nut, 2 pieces of 1/8-IP roll Flower locknut, 4 washeres, a 3-way knob socket, an 8-inch detachable silver harp, and an 8-foot clear wire kit
- Practical design: the silver-plated socket comes with an optional side hole in the bottom cover, so you don't have to worry that the wire cannot pass through the lamp holder and therefore affects the overall appearance of the light
- Durable material: the tabletop lamp kit is made of galvanized steel, not easy to rust, durable to use for a long time; The lamp kit is reusable after being taken off
- DIY kit: the lamp light kit is suitable for DIY projects at home or in the shop; With this tabletop lamp kit, you can repair and replace the broken and aging lamp kits and the old accessories out of luster
- Easy to install: The instruction is included for reference, so you can use your own lamp holder to DIY a favorite lamp in a few minutes, or apply this lamp kit to connect the old lamps again
- See more on Amazon...
Brand: Mudder | Manufacturer: Mudder
Weight: 1.70 pounds
See On Amazon #9
Canomo 2 Sets Lamp Making Kit Lamp Wiring Kit with 8 Inch Harp, 2 Pieces 12" Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair, Black
Asin: B097T1BN4R | Model: lamp kit -7 | PartNumber: lamp kit -7
Create A Custom Lamp With Your Own Lamp Base Or Re-Wire A Lamp With Our New Parts Kit..
Great For Diy Your Own Lamp And For Repair And Replacement Of Broken, Tarnished Or Lamp Parts..
Lamp Pipe Kit Made Of Zinc Plated Steel; Contains Two Each: 1/8-Ip X 12" Threaded Pipe, 1/8-Ip Couplings, 1/8-Ip Locknuts, 1/8-Ip Knurled Locknuts, Washers.
Three-Way Socket Lamp Making/Repair Kit Is Made Of High-Quality Metal Which Ensures Premium Quality And A Classic Look. The Lamp Kit Is Ul And Cul Safety Rated For Indoor Location Use.
Features
- Package Include 2 Packs: 3-Way turn knob socket, 8 inch black detachable harp, 8 foot UL listed blak cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring.
- Three-Way Socket Lamp Making/Repair Kit is made of high-quality metal which ensures premium quality and a classic look. The Lamp Kit is UL and CUL safety rated for Indoor location use
- Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit.
- Lamp pipe kit made of zinc plated steel; Contains two each: 1/8-IP x 12 threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers
- Great for DIY your own lamp and for repair and replacement of broken, tarnished or lamp parts.
- See more on Amazon...
Brand: Canomo | Manufacturer: Canomo
Dimensions: 1.50 x 12.00 x 6.00 inches | Weight: 1.20 Pounds
See On Amazon #10
Honoson Lamp Kit for Repair Lamp Replacement for Table Lamps with 3 Way Socket Lamp Repair Kit Rewire Finish Kit Lamp Wiring Parts for Antique DIY Steel Lamp Design Light Making Switch (Bronze)
Asin: B0B93DMR6C
Appropriate Size: This Lamp Repair Kit Contains A 5/8 Inch 1/8 Ip Steel Running Threaded Joint, With Outer Diameter Of 3/8 Inch, And With Rust Proof Yellow Zinc Plate, Suitable Size For Easy Use; Please Check The Size Before Ordering In Case Of Unfit Situation.
Easy Installation: The Instruction Is Included For Reference, So You Can Use Your Own Lamp Holder To Diy A Favorite Lamp In A Few Minutes, Or Apply This Lamp Kit To Connect The Aged Lamps Again; The Installation Process Will Be Convenient And Fast, Saving Your Energy And Strength.
Diy Lamp Kit: The Lamp Light Kit Is Suitable For Diy Projects At Home Or In The Shop; Use Your Creativity And Hands On Ability, You May Apply This Diy Lamp Wiring Parts Kit To Repair And Replace The Broken And Aging Lamp, As Well As The Broken Accessories Out Of Luster Effortlessly.
Sturdy Material: The Make A Lamp Kit Is Made Of Quality Galvanized Steel, Not Easy To Rust Or Break, Sturdy To Use For A Long Time; The Lamp Kit Is Reusable After Being Taken Off, Saving Your Cost And Time For Replacing Other Kits Often.
Features
- Package Includes: you will get 1 table lamp replacement kit, including a 8 pin lamp cord, a 3 way matching socket, a pacifier, a washer and 2 hex nuts to better repair broken lamps; The complete combination helps you to repair the lamp faster without tool lack trouble
- Sturdy Material: the make a lamp kit is made of quality galvanized steel, not easy to rust or break, sturdy to use for a long time; The lamp kit is reusable after being taken off, saving your cost and time for replacing other kits often
- Appropriate Size: this lamp repair kit contains a 5/8 inch 1/8 IP steel running threaded joint, with outer diameter of 3/8 inch, and with rust proof yellow zinc plate, suitable size for easy use; Please check the size before ordering in case of unfit situation
- DIY Lamp Kit: the lamp light kit is suitable for DIY projects at home or in the shop; Use your creativity and hands on ability, you may apply this DIY lamp wiring parts kit to repair and replace the broken and aging lamp, as well as the broken accessories out of luster effortlessly
- Easy Installation: the instruction is included for reference, so you can use your own lamp holder to DIY a favorite lamp in a few minutes, or apply this lamp kit to connect the aged lamps again; The installation process will be convenient and fast, saving your energy and strength
- See more on Amazon...
Brand: Honoson | Manufacturer: Sun-Lite Sockets Industry Inc
Dimensions: 7.00 x 7.00 x 5.00 Inches
See On Amazon #11
Brass Plated Oil Burner for Mason Jars - Turn Any Mason Jar into a Vintage Lamp
Asin: B0CFRCYSYL | Model: M999 | PartNumber: M999 | Ean: 0816682029303 | UPC: 816682029303
🛠️ Easy Installation: With A Thoughtful Screw-Top Design, This Burner Guarantees A Hassle-Free Setup, Allowing You To Transform Any Standard Mason Jar Into An Elegant Oil Lamp..
🕯️ Complete Set: Beyond Just The Burner, Each Pack Is Outfitted With A Premium Cotton Wick, Ensuring You Have Everything You Need To Light Up Your Space Immediately..
🔥 Secure Chimney Support: Designed For Safety And Stability, This Burner Flawlessly Accommodates Chimneys With A 3" Base Diameter, Safeguarding Against Potential Wobbles Or Mishaps..
🎨 Rustic Charm: Brass-Plated Stamped Steel Construction Radiates A Vintage Aesthetic, Ensuring Your Mason Jar Oil Lamp Stands Out As A Statement Piece In Any Setting..
Features
- MASON JAR COMPATIBILITY: Exclusively crafted to convert mason jars into enchanting oil lamps, this burner effortlessly fits standard mason jar lids.
- RUSTIC CHARM: Brass-plated stamped steel construction radiates a vintage aesthetic, ensuring your mason jar oil lamp stands out as a statement piece in any setting.
- EASY INSTALLATION: With a thoughtful screw-top design, this burner guarantees a hassle-free setup, allowing you to transform any standard mason jar into an elegant oil lamp.
- SECURE CHIMNEY SUPPORT: Designed for safety and stability, this burner flawlessly accommodates chimneys with a 3 base diameter, safeguarding against potential wobbles or mishaps.
- COMPLETE SET: Beyond just the burner, each pack is outfitted with a premium cotton wick, ensuring you have everything you need to light up your space immediately.
- See more on Amazon...
Brand: Creative Hobbies | Manufacturer: Creative Hobbies
Warranty: Manufacturer warranty good for 30 days from date of purchase.
See On Amazon #12
B&P Lamp 3-Way Uno Bridge Adapter, Brass Plated & Lacquered
Asin: B008UWAN0W | Model: 22116 | PartNumber: 22116 | Ean: 0848107038249 | UPC: 848107038249
The Center Opening Measures 1 1/4".
Allows Conversion From A Washer Shade To An Uno Shade.
Brass Plated - Polished And Lacquered Finish.
Features
- 3-way UNO Bridge Adapter
- Brass plated - polished and lacquered finish
- The center opening measures 1 1/4
- Allows conversion from a washer shade to an UNO shade
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
See On Amazon #13
B&P Lamp Screw Collar Canopy Kit (Antique Brass)
Asin: B01FGD6TZA | Model: 11834A | PartNumber: 11834A | Ean: 0848107065184 | UPC: 848107065184
Center Loop Mounts To Canopy With Retaining Ring. Easy To Use, No Visible Side Screws.
Designed By B&P Lamp Supply.
Kit Comes With Crossbar, Mounting Screws, Threaded Rod, And Matching Loop With Screw Collar.
5 Inch Diameter Steel Canopy With 1-1/16 Inch I.D. Center Hole To Fit Screw Collar-Type Loop.
Features
- Shallow Dome Modern STYLE Plated steel ceiling canopy with bottom loop
- 5 Inch diameter steel canopy with 1-1/16 Inch I.D. center hole to fit screw collar-type loop
- Center Loop mounts to canopy with retaining ring. Easy to USE, no visible side screws
- Kit comes with crossbar, mounting screws, threaded rod, and matching loop with screw collar
- Designed by B&P Lamp Supply
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
Weight: 0.37 Pounds
See On Amazon #14
B&P Lamp Antique Brass Finish Table Lamp Wiring Kit with a 10 Inch Harp and Push-Thru Socket
Asin: B0CX9D1Q4D | Ean: 0848107092821 | UPC: 848107092821
Comes With An 8 Foot Long Antique Brass Lamp Cord.
Comes With U.L. Listed Components.
Socket Is Rated 660W-250V.
Hardware Kit Includes A Finial, A Riser, A Check Ring, A Brass Nut, A 5/8 Inch Nipple, A 2 Inch Nipple, A Lock Washer, And Assemble Instructions.
Features
- Antique brass plated table lamp rewiring kit complete with hardware kit, push-thru socket, and a lamp harp
- Hardware kit includes a finial, a riser, a check ring, a brass nut, a 5/8 inch nipple, a 2 inch nipple, a lock washer, and assemble instructions
- Comes with an 8 foot long antique brass lamp cord
- Socket is rated 660W-250V
- Comes with U.L. listed components
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
See On Amazon #15
I Like That Lamp Complete Lamp Harp Set (1 Pack) - Antique Brass 9 Harp (Suitable for a 10" to 11" Lampshade) - Includes Harp, Saddle Holder Base & Finial - Harp Converter For Table and Floor Lamps
Asin: B07PZ8J1WV | Ean: 0780729817652 | UPC: 780729817652
Antique Brass Color - Perfect For Modern Lighting Fixtures And Contemporary Home Decor Styling. This Rustic Toned Finish Is Amongst The Most Versatile Of Colors..
Several Size Options To Fit Any Lamp Shade - Choose From Several Size Options And Find The Proper Length To Fit Your Lamp. Ideal For Modern Lamps And Vintage Lamps With Uncommon Or Hard-To-Find Dimensions..
Finial Included - Finials Are Used To Screw The Lamp Shade Onto The Harp For A Well-Structured And Stable Light Fixture. They’Re Not Typically Included In Harp Sets, So Save Yourself Time And Effort And Get A Set Where Everything Is Included..
Complete Lamp Harp Set - Includes A Lamp Harp, Lamp Saddle (Harp Holder), And Lamp Finial. Everything You Need Is In This Convenient Kit..
Features
- CHOOSE THE PERFECT FIT - This harp measures 9" long and is suitable for a lampshade 10" - 11" tall.
- COMPLETE LAMP HARP SET - Includes a lamp harp, lamp saddle (harp holder), and lamp finial. Everything you need is in this convenient kit.
- ANTIQUE BRASS COLOR - Perfect for modern lighting fixtures and contemporary home decor styling. This rustic toned finish is amongst the most versatile of colors.
- FINIAL INCLUDED - Finials are used to screw the lamp shade onto the harp for a well-structured and stable light fixture. They re not typically included in harp sets, so save yourself time and effort and get a set where everything is included.
- SEVERAL SIZE OPTIONS TO FIT ANY LAMP SHADE - Choose from several size options and find the proper length to fit your lamp. Ideal for modern lamps and vintage lamps with uncommon or hard-to-find dimensions.
- See more on Amazon...
Brand: I Like That Lamp | Manufacturer: I Like That Lamp
Weight: 0.30 Pounds
See On Amazon #16
B&P Lamp 6 Inch Heavy Duty Lamp Harp, Antique Bronze Finish
Asin: B01LXQYE1U | Model: 12780B | PartNumber: 12780B | Ean: 0848107075411 | UPC: 848107075411
The Saddle, Or Base, Slips A 1/8Ip (3/8 Inch Diameter).
Works As A Great Replacement For Both Table Lamps And Floor Lamps.
Measures From Bottom Of Harp Base To Top Of Harp Platform (Not Measuring The Threads On Top).
Top Of Harp Accepts 1/4-27 Finial, Which Is The Standard Size For Lamp Harps.
Features
- 6 inch heavy duty lamp harp with a detachable base and antique bronze finish
- Top of harp accepts 1/4-27 finial, which is the standard size for lamp harps
- The saddle, or base, slips a 1/8IP (3/8 inch diameter)
- Measures from bottom of harp base to top of harp platform (not measuring the threads on top)
- Works as a great replacement for both table lamps and floor lamps
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 0.17 pounds
See On Amazon #17
B&P Lamp Antique Brass Finish Table Lamp Wiring Kit with a 6 Inch Harp and Push-Thru Socket
Asin: B01LZ1UR8R | Ean: 0848107082464 | UPC: 848107082464
Comes With An 8 Foot Long Antique Brass Lamp Cord.
Comes With U.L. Listed Components.
Socket Is Rated 660W-250V.
Hardware Kit Includes A Finial, A Riser, A Check Ring, A Brass Nut, A 5/8 Inch Nipple, A 2 Inch Nipple, A Lock Washer, And Assemble Instructions.
Features
- Antique brass plated table lamp rewiring kit complete with hardware kit, push-thru socket, and a lamp harp
- Hardware kit includes a finial, a riser, a check ring, a brass nut, a 5/8 inch nipple, a 2 inch nipple, a lock washer, and assemble instructions
- Comes with an 8 foot long antique brass lamp cord
- Socket is rated 660W-250V
- Comes with U.L. listed components
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
See On Amazon #18
B&P Lamp Nickel Plated Finish Table Lamp Wiring Kit with a 9 Inch Harp and 3-Way Socket
Asin: B01M1BIALH | Model: 30551N8 | PartNumber: 30551N8 | Ean: 0848107082389 | UPC: 848107082389
Comes With An 8 Foot Long Clear Silver Lamp Cord.
Comes With U.L. Listed Components.
Socket Is Rated 250W-250V.
Hardware Kit Includes A Finial, A Riser, A Check Ring, A Brass Nut, A 5/8 Inch Nipple, A 2 Inch Nipple, A Lock Washer, And Assemble Instructions.
Features
- Nickel plated table lamp rewiring kit complete with hardware kit, 3-way socket, and a lamp harp
- Hardware kit includes a finial, a riser, a check ring, a brass nut, a 5/8 inch nipple, a 2 inch nipple, a lock washer, and assemble instructions
- Comes with an 8 foot long clear silver lamp cord
- Socket is rated 250W-250V
- Comes with U.L. listed components
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
See On Amazon #19
B&P Lamp 14 Inch Heavy Duty Lamp Harp, Brass Plated Steel Finish
Asin: B008UWALPO | Model: 12752 | PartNumber: 12752 | Ean: 0848107029544 | UPC: 848107029544
The Saddle, Or Base, Slips A 1/8Ip (3/8 Inch Diameter).
Works As A Great Replacement For Both Table Lamps And Floor Lamps.
Measures From Bottom Of Harp Base To Top Of Harp Platform (Not Measuring The Threads On Top).
Top Of Harp Accepts 1/4-27 Finial, Which Is The Standard Size For Lamp Harps.
Features
- 14 inch heavy duty lamp harp with a detachable base and brass plated steel finish
- Top of harp accepts 1/4-27 finial, which is the standard size for lamp harps
- The saddle, or base, slips a 1/8IP (3/8 inch diameter)
- Measures from bottom of harp base to top of harp platform (not measuring the threads on top)
- Works as a great replacement for both table lamps and floor lamps
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
See On Amazon #20
B&P Lamp Brass Plated Finish Table Lamp Wiring Kit with a 10 Inch Harp and 3-Way Socket
Asin: B01LYECRYG | Model: 30551N9 | PartNumber: 30551N9 | Ean: 0848107082396 | UPC: 848107082396
Comes With An 8 Foot Long Brown Lamp Cord.
Comes With U.L. Listed Components.
Socket Is Rated 250W-250V.
Hardware Kit Includes A Finial, A Riser, A Check Ring, A Brass Nut, A 5/8 Inch Nipple, A 2 Inch Nipple, A Lock Washer, And Assemble Instructions.
Features
- Brass plated table lamp rewiring kit complete with hardware kit, 3-way socket, and a lamp harp
- Hardware kit includes a finial, a riser, a check ring, a brass nut, a 5/8 inch nipple, a 2 inch nipple, a lock washer, and assemble instructions
- Comes with an 8 foot long brown lamp cord
- Socket is rated 250W-250V
- Comes with U.L. listed components
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
Dimensions: 3.94 x 3.94 x 3.94 inches
See On Amazon
Looking For Something Else?
Search