Dive Rite Mounting Plates for Doubles (Set of 2)
Asin: B00AJRSE2K | Ean: 0879642000262 | UPC: 879642000262
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: Dive Rite
Dimensions: 1.10 x 5.40 x 3.50 inches | Weight: 0.50 Pounds
See On Amazon Similar To Dive Rite Mounting Plates for
#1
Nilight 2PCS Square LED Trailer Light Kit Low Profile Submersible IP68 LED Stop Turn Tail Side Marker License Light for 12V Utility Trailer Boat Camper RV Trucks Marine Snowmobile,2 Years Warranty
Asin: B08C7XN4P8 | Model: TL-22 | PartNumber: TL-22 | Ean: 0781621092956 | UPC: 781621092956
Ip68 Entirely Submersible: Inside Leds And Circuit Board Is Fully Waterproof Sealed To Work Under Water Perfectly Without Electric Short Risk. The Light Housing Also Features Water Drainage For Added Protection.
Easy Installation: Light Mounting: Stud-Mounted On The Surface Design, Light With License Light On The Left, The Other On Right. Wiring Connection: Color Coded Wire, Just Color To Color White To The Ground (Vehicle Frame) And Then Follow Picture 6 For Wire Routing Instruction. 2 Years Warranty Honored By Nilight..
All-In-One Kit: Comes With Everything For Your Straightforward Installation, Include Square Lights, Amber Clearance Light, License Plate Bracket, 25Ft Length Trailer Wiring Harness, The Reflector And The Different Types Of Stainless Steel Mounting Hardware. (For Hardware Instruction, Please Picture 8).
Brighter And Safe: Employ Quality Led To Draw Less Amperage But Outputs Optimal Brightness, Improving Great Visibility And Extend Longer Lifetime Than The Incandescent Lamp. 100% Dot Compliance To Ensure Your Safety.
Features
- 7 Full Functions: Combined functions of stop, turn tail light, side marker, side reflector, rear reflector, license plate light. Perfect for 12V DC vehicles with max width of 80 inches. Fit most trailers, boats, trucks, RV, Marine, Pickups, camper, tractors, etc. bus, lorry, van, caravan, snowmobile utility trailers
- Brighter and Safe: Employ quality led to draw less amperage but outputs optimal brightness, improving great visibility and extend longer lifetime than the incandescent lamp. 100% DOT Compliance to ensure your safety
- IP68 Entirely Submersible: Inside LEDs and circuit board is fully waterproof sealed to work under water perfectly without electric short risk. The light housing also features water drainage for added protection
- All-in-one Kit: Comes with everything for your straightforward installation, include square lights, amber clearance light, license plate bracket, 25ft length trailer wiring harness, the reflector and the different types of stainless steel mounting hardware. (For hardware instruction, please picture 8)
- Easy Installation: Light mounting: stud-mounted on the surface design, light with license light on the left, the other on right. Wiring connection: color coded wire, just color to color white to the ground (vehicle frame) and then follow picture 6 for wire routing instruction. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon #2
NOVINO DB-TB-M White Diving Board Mounting Kit Replacement for Inter-Fab Two Hole Residential Diving Boards with Bolts/Washers/Nuts etc
Asin: B0C6F138H2 | Model: DB-004 | PartNumber: DB-004
Perfect Fit Replacement Hardware For Two-Hole Residential Diving Boards,Replace Original Old Rusty Dangeous Board Mounting Bolts Set On The Diving Board.
Everything In Need For A Replacement Bolt Kit,Includes---2Pcs 1/2 " Hex Nuts + 2Pcs 1/2" Lock Washers + 2Pcs 1/2 " Plastic Nut Cap + 2Pcs 1/2" X 2" Flat Washers + 2Pcs 1/2" X 5" Bolts + 2Pcs 1/2"Black Rubber Mounting Washers + 2Pcs 1/2"Red Rubber Mounting Washers + 2Pcs White Plastic Recessed Mounting Washer Assembly..
Good Choice To Renovate Aging Diving Board,Made Diving Board Safe&Fresh Look Again.No Need To Buy The Whole Diving Board,Just Remove The Broken Corroded Bolts,Washer,Cap Etc. Save Money!.
The Db-Tb-M Diving Board Mounting Kit Replacement For Most Two-Hole Inter-Fab Diving Board. Replaces Inter-Fab Part# Db-Tb-M.
Features
- High quality 304 stainless steel diving board bolts replacement &hardware. Just like the original Inter-Fab diving board mounting kit.
- The DB-TB-M diving board mounting kit replacement for most two-hole Inter-Fab diving board. Replaces Inter-Fab Part# DB-TB-M
- Perfect fit replacement hardware for two-hole residential diving boards,replace original old rusty dangeous board mounting bolts set on the diving board
- Good choice to renovate aging diving board,made diving board safe&fresh look again.No need to buy the whole diving board,just remove the broken corroded bolts,washer,cap etc. Save money!
- Everything in need for a replacement bolt kit,includes---2pcs 1/2 Hex Nuts + 2pcs 1/2 Lock Washers + 2pcs 1/2 Plastic Nut Cap + 2pcs 1/2 x 2 Flat Washers + 2pcs 1/2 x 5 Bolts + 2pcs 1/2Black Rubber Mounting Washers + 2pcs 1/2Red Rubber Mounting Washers + 2pcs White Plastic Recessed Mounting Washer Assembly.
- See more on Amazon...
Brand: NOVINO | Manufacturer: NOVINO
Dimensions: 6.00 x 3.90 x 1.50 inches | Weight: 0.10 Pounds
See On Amazon #3
Vsttar 67-209-911-SS Mounting Kit for Pool Diving Board Replacement for Two Hole Residential Diving Board, Fit for 67-209-911-SS Residential Diving Board Mounting Kit, White
Asin: B0BYRVVTPX | Model: 67-209-911-SS | PartNumber: 67-209-911-SS | Ean: 0761479912088 | UPC: 761479912088
✅This Is A Diving Board Bolt Kit Used On Some Two Hole Boards..
✅This Kit Includes The Following: (2) 1/2" X 4-1/2" Ss Carriage Bolts. (2) Ss Lock Washers, 1/2In Id, 7/8In Od. (2) Ss Flat Washers, 9/16In Id, 2In Od, 1/8In Thick. (2) Brass Hex Head Nuts, 1/2In. (2) 1/2In Plastic Cap. (2) Plasic Recessed Mounting Washers With Caps, 2-7/16In Od. (2) Black Rubber Washers, 2In Od. (2) Red Rubber Washers, 2In Od..
✅The Kit Patr Number # 67-209-911 Was Made With Galvanized Hardware This Current Style Uses Stainless Steel And Brass Material: Stainless Steel Bolts, Washers, Lock Washers, White Plastic Caps, And Brass Nuts..
✅Vsttar Stainless Steel Mounting Hardware For 2 Hole Diving Boards - 67-209-911-Ss..
Features
- Vsttar 67-209-911-SS 2-Hole Pool Diving Board Mounting Kit Fit for 6,8 & 10 FT Boards.
- Vsttar Stainless Steel Mounting Hardware for 2 Hole Diving Boards - 67-209-911-SS.
- This Is A Diving Board Bolt Kit Used On Some Two Hole Boards.
- The Kit Patr Number # 67-209-911 Was Made With Galvanized Hardware This Current Style Uses Stainless Steel And Brass Material: Stainless Steel Bolts, Washers, Lock Washers, White Plastic Caps, and Brass Nuts.
- This Kit Includes The Following: (2) 1/2 X 4-1/2 SS Carriage Bolts. (2) Ss Lock Washers, 1/2in ID, 7/8in OD. (2) Ss Flat Washers, 9/16in ID, 2in OD, 1/8in Thick. (2) Brass Hex Head Nuts, 1/2in. (2) 1/2in Plastic Cap. (2) Plasic Recessed Mounting Washers With Caps, 2-7/16in OD. (2) Black Rubber Washers, 2in OD. (2) Red Rubber Washers, 2in OD.
- See more on Amazon...
Brand: Vsttar | Manufacturer: Vsttar
Dimensions: 0.50 x 5.00 x 0.50 inches
Warranty: 2-year warranty
See On Amazon #4
Rig Rite 925 Transducer Plate
Asin: B00ZX01YOS | Model: 925 | PartNumber: 925 | Ean: 0785311009255 | UPC: 785311009255
Brand: Rig Rite | Manufacturer: Rig Rite
Dimensions: 0.75 x 12.00 x 3.50 inches | Weight: 1.00 Pounds
See On Amazon #5
Attwood 94110-5 UV-Resistant Marine-Grade Boat Transducer Mounting Plate Hardware Kit
Asin: B00AU5PF6Y | Model: 94110-5 | PartNumber: 94110-5 | Ean: 0022697941107 | UPC: 022697941107
Mounts Easily With Only 2 Screws.
Attwood Products Are Both Compatible And Reliable, Engineered And Built With A Never-Fail Attitude.
All Hardware Included.
Premium Materials; Unaffected By Uv Rays.
Features
- Marine-grade polymer plate will not warp or corrode
- Premium materials; unaffected by UV rays
- Mounts easily with only 2 screws
- All hardware included
- Attwood products are both compatible and reliable, engineered and built with a never-fail attitude
- See more on Amazon...
First Available: 01/01/2018
Brand: Attwood | Manufacturer: Attwood
Dimensions: 15.50 x 0.75 x 1.01 inches | Weight: 0.66 pounds
See On Amazon #6
Brocraft Resistant Marine-Grade Boat Transducer Mounting Plate Hardware Kit/Transducer Mounting Board
Asin: B0BJS4QY35
Mounts Easily With Only 2 Screws.
Easy To Adjust Or Replace Transducers Without Adding More Holes To Your Boat..
Constructed Of Quality, Durable Materials That Are Resistant To The Harsh Marine Environments.
Marine-Grade Polymer Plate Will Not Warp Or Corrode.
Features
- Provides the ideal surface for mounting a transducer to your boat
- Marine-grade polymer plate will not warp or corrode
- Mounts easily with only 2 screws
- Constructed of quality, durable materials that are resistant to the harsh marine environments
- Easy to adjust or replace transducers without adding more holes to your boat.
- See more on Amazon...
Brand: Brocraft | Manufacturer: Brocraft
Dimensions: 3.50 x 4.50 x 0.75 inches
Warranty: one year
See On Amazon #7
Vsttar DB-TB-M, 67-209-911-SS White Diving Board Mounting Kit Replacement for Inter-Fab Two Hole Residential Diving Boards with Bolts/Washers/Nuts etc
Asin: B0C9G15J6Z | Model: 67-209-911-SS | PartNumber: 67-209-911-SS | Ean: 0761479910282 | UPC: 761479910282
✅This Is A Diving Board Bolt Kit Used On Some Two Hole Boards..
✅This Kit Includes The Following: (2) 1/2" X 4-1/2" Ss Carriage Bolts. (2) Ss Lock Washers, 1/2In Id, 7/8In Od. (2) Ss Flat Washers, 9/16In Id, 2In Od, 1/8In Thick. (2) Brass Hex Head Nuts, 1/2In. (2) 1/2In Plastic Cap. (2) Plasic Recessed Mounting Washers With Caps, 2-7/16In Od. (2) Black Rubber Washers, 2In Od. (2) Red Rubber Washers, 2In Od..
✅The Kit Patr# Db-Tb-M, 67-209-911-Ss Was Made With Galvanized Hardware This Current Style Uses Stainless Steel And Brass Material: Stainless Steel Bolts, Washers, Lock Washers, White Plastic Caps, And Brass Nuts..
✅Vsttar Stainless Steel Mounting Hardware For 2 Hole Diving Boards -Db-Tb-M, 67-209-911-Ss..
Features
- Vsttar DB-TB-M, 67-209-911-SS 2-Hole Pool Diving Board Mounting Kit Fit for 6,8 & 10 FT Boards.
- Vsttar Stainless Steel Mounting Hardware for 2 Hole Diving Boards -DB-TB-M, 67-209-911-SS.
- This Is A Diving Board Bolt Kit Used On Some Two Hole Boards.
- The Kit Patr# DB-TB-M, 67-209-911-SS Was Made With Galvanized Hardware This Current Style Uses Stainless Steel And Brass Material: Stainless Steel Bolts, Washers, Lock Washers, White Plastic Caps, and Brass Nuts.
- This Kit Includes The Following: (2) 1/2 X 4-1/2 SS Carriage Bolts. (2) Ss Lock Washers, 1/2in ID, 7/8in OD. (2) Ss Flat Washers, 9/16in ID, 2in OD, 1/8in Thick. (2) Brass Hex Head Nuts, 1/2in. (2) 1/2in Plastic Cap. (2) Plasic Recessed Mounting Washers With Caps, 2-7/16in OD. (2) Black Rubber Washers, 2in OD. (2) Red Rubber Washers, 2in OD.
- See more on Amazon...
Brand: Vsttar | Manufacturer: Vsttar
Dimensions: 0.50 x 5.00 x 0.50 inches
See On Amazon #8
Brocraft Resistant Marine-Grade Boat Transducer Mounting Plate Hardware Kit/Transducer Mounting Board
Asin: B0BJQTVBW2
Mounts Easily With Only 2 Screws.
Easy To Adjust Or Replace Transducers Without Adding More Holes To Your Boat..
Constructed Of Quality, Durable Materials That Are Resistant To The Harsh Marine Environments.
Marine-Grade Polymer Plate Will Not Warp Or Corrode.
Features
- Provides the ideal surface for mounting a transducer to your boat
- Marine-grade polymer plate will not warp or corrode
- Mounts easily with only 2 screws
- Constructed of quality, durable materials that are resistant to the harsh marine environments
- Easy to adjust or replace transducers without adding more holes to your boat.
- See more on Amazon...
Brand: Brocraft | Manufacturer: Brocraft
Warranty: one year
See On Amazon #9
Scuba Choice Scuba Tech Diving Aluminum Black Backplate
Asin: B00BQ2GBS6 | Model: SCBPP-02 | PartNumber: SCBPP-02 | Ean: 0608939471481 | UPC: 608939471481
11" On-Center Holes For Mounting Doubles.
3/8" Slots For Lift Bag Sleeves Or Other Accessories.
1" And 2" Slots On The Bottom For Crotch Straps.
Plate Thickness: 2Mm.
Features
- Measurement: 15" x 10"
- Plate thickness: 2mm
- 11 on-center holes for mounting doubles
- 1 and 2 slots on the bottom for crotch straps
- 3/8 slots for lift bag sleeves or other accessories
- See more on Amazon...
Brand: Scuba Choice | Manufacturer: Aqua Edge
Dimensions: 3.00 x 15.00 x 10.00 inches | Weight: 1.63 Pounds
Warranty: 30 day warranty against manufacturer defects
See On Amazon #10
DB-TB-M White Diving Board Mounting Kit Replacement for Two Hole Residential Diving Boards
Asin: B09FP9PZCS | Ean: 0761587329617 | UPC: 761587329617
3. Including: Nuts, Bolts, Washers And Hardware.
5. Please Confirm Whether Your Model Is Suitable Before Buying.
4. Simple Operation And Long Service Life Material.
2.Db-Tb-M Diving Board Mounting Kit Replacement For Most Two-Hole Diving Board Mounting Kits Just Removing The Broken One And Replacing It With A New One.
Features
- 1.Part number: DB-TB-M
- 2.DB-TB-M diving board mounting kit replacement for most two-hole diving board mounting kits just removing the broken one and replacing it with a new one
- 3. Including: nuts, bolts, washers and hardware
- 4. Simple operation and long service life material
- 5. Please confirm whether your model is suitable before buying
- See more on Amazon...
Brand: WEST ORGIN | Manufacturer: WEST ORGIN
Dimensions: 2.00 x 6.30 x 3.00 inches
See On Amazon #11
Dive Rite Travel/Sidemount Stage Strap - Large
Asin: B01B77HO7G | Model: SG_B01B77HO7G_US | PartNumber: SG_B01B77HO7G_US
Made In The U.S.A..
One-Inch (2.54 Cm) Nylon Webbing Strap With 2,200 Lbs (998 Kgs) Tensile Strength..
Gm2049-Ts-7 And Gm2049-Ts-5 Use A Deluxe 4-Inch Wide (10 Cm) Hose Retainer Made Of Proprietary, Stretch Material With Non-Slip Silicone Strips. A Secondary, 1-Inch Wide Hose Retainer Provides An Additional Point To Secure The Hose..
Choice Of Gm2049-Ts-7 For 7-Inch Diameter Tanks Or Gm2049-Ts-5 For 5-Inch Diameter Tanks. All Versions Come With A Tank Choker For Sidemount Divers Who Use A Stage Strap Set Up On Their Bottles. Strap Is Easily Disassembled And Re-Assembled, Giving The Abiltiy To Add Or Remove Hose Retainers As Needed..
Features
- Quickly set up stage, deco, or sidemount bottles without tools using our Travel Stage Straps. Two hose retainers (one deluxe, and one standard) and the 1.5 inch low profile cam strap are captured in the stage strap, keeping the entire set up connected as one piece. Adding and removing this kit from cylinders is easy, and losing pieces from the kit is nearly impossible. Use of a cam strap instead of a metal clamp allows divers to quickly set up, adjust or remove the straps. Marine grade stainless
- Choice of GM2049-TS-7 for 7-inch diameter tanks or GM2049-TS-5 for 5-inch diameter tanks. All versions come with a tank choker for sidemount divers who use a stage strap set up on their bottles. Strap is easily disassembled and re-assembled, giving the abiltiy to add or remove hose retainers as needed.
- Made in the U.S.A.
- GM2049-TS-7 and GM2049-TS-5 use a deluxe 4-inch wide (10 cm) hose retainer made of proprietary, stretch material with non-slip silicone strips. A secondary, 1-inch wide hose retainer provides an additional point to secure the hose.
- One-inch (2.54 cm) nylon webbing strap with 2,200 lbs (998 kgs) tensile strength.
- See more on Amazon...
Brand: Dive Rite
Dimensions: 1.90 x 10.30 x 5.10 Inches | Weight: 0.90 pounds
See On Amazon #12
Rig Rite Manufacturing 930 Marine 4"x 18" Horizontal Transducer Plate
Asin: B0000BVFUV | Model: 930 | PartNumber: 930 | Ean: 0785311009309 | UPC: 785311009309
Brand: Rig Rite | Manufacturer: Rig Rite
Weight: 1.00 Pounds
See On Amazon #13
Hollis Backplate Backpad with bookscrews
Asin: B003A24MFO | Ean: 4250770816004
Durable Long Lasting Construction.
Sewn And Taped Edges.
Complete With Mounting Book Screws.
Features
- Increased Dive Comfort
- Complete with Mounting Book Screws
- Durable Long Lasting Construction
- Sewn and Taped Edges
- See more on Amazon...
Brand: Hollis | Manufacturer: Hollis Gear
Dimensions: 1.40 x 10.50 x 14.30 inches
See On Amazon #14
Rig Rite 3003.282 Manufacturing 920 Marine 3.5"x 12" Horizontal Transducer Plate
Asin: B0000BVFUT | Model: 3003.282 | PartNumber: 3003.282 | Ean: 0785311009200, 0796793854547 | UPC: 796793854547, 785311009200
Country Of Origin: United States.
Product Type: Autoaccessory.
Package Quantity: 1.
Features
- Package Dimensions: 30.226 cms (L) x 8.89 cms (W) x 1.524 cms (H)
- Package Quantity: 1
- Country of Origin: United States
- Product type: AUTOACCESSORY
- See more on Amazon...
Brand: Rig Rite | Manufacturer: Rig Rite
Dimensions: 0.60 x 12.00 x 3.80 Inches | Weight: 1.00 Pounds
See On Amazon #15
Dive Rite Transplate Harness - Large (T3550-LG)
Asin: B091MN688Q | Model: T3550 | PartNumber: T3550 | Ean: 0879642007537 | UPC: 879642007537
Shoulder Straps Feature Pivot Rings At Chest Level For Comfort.
Acetyl Resin Engineered Plastic Quick Release Buckles On Shoulders For Easy Doff And Don.
Four 2-Inch D-Rings On Each Shoulder Strap Are Slightly Bent For Improved Access And Placement Can Be Adjusted.
Features
- Shoulder pads constructed of 1000 denier ballistic nylon fabric for tear and abrasion resistance
- Four 2-inch D-rings on each shoulder strap are slightly bent for improved access and placement can be adjusted
- Shoulder straps feature pivot rings at chest level for comfort
- Acetyl resin engineered plastic quick release buckles on shoulders for easy doff and don
- See more on Amazon...
Brand: Dive Rite | Manufacturer: Dive Rite
Dimensions: 5.00 x 12.00 x 16.00 inches | Weight: 1.00 Pounds
See On Amazon #16
Dive Rite XT Lite SS Backplate, Silver (Model: BC2117)
Asin: B00ES56FNO | Model: BC2117 | PartNumber: BC2117 | Ean: 0879642002952 | UPC: 879642002952
No Rough Edges - All Edges Are Laser Cut, And Individually Finished By Hand To Ensure That There Are No Rough Or Jagged Edges Anywhere On The Plate.
Tips - When Traveling With A Rigid Backplate, Be Sure To Disassemble Your Plate From Your Wing And Store Them Separately During Travel. This Will Reduce The Possibility Of Your Plate Impacting And Damaging Your Wing Caused By Objects Shifting.
Adjustable - The Xt Lite Backplate Is Configured With 11" On Center Mounting Holes To Accommodate Standard Double Tank Bolt Kits, Including Two Holes For The Upper Bolt To Give Adjustability Of Tank Height.
Ligthweight - A Series Of Cut-Outs Along The Body Of The Plate Reduce Its Overall Weight While Still Maintaining The Support Needed For The Heaviest Of Double Cylinder Configurations.
Features
- NEW DIVE RITE XT LITE - is constructed from 16 guage 316L grade stainless steel, which is a low carbon, rustproof grade of stainless
- LIGTHWEIGHT - A series of cut-outs along the body of the plate reduce its overall weight while still maintaining the support needed for the heaviest of double cylinder configurations
- NO ROUGH EDGES - All edges are laser cut, and individually finished by hand to ensure that there are no rough or jagged edges anywhere on the plate
- ADJUSTABLE - The XT Lite backplate is configured with 11 on center mounting holes to accommodate standard double tank bolt kits, including two holes for the upper bolt to give adjustability of tank height
- TIPS - When traveling with a rigid backplate, be sure to disassemble your plate from your wing and store them separately during travel. This will reduce the possibility of your plate impacting and damaging your wing caused by objects shifting
- See more on Amazon...
Brand: Dive Rite | Manufacturer: Dive Rite
Dimensions: 2.00 x 15.00 x 11.00 inches | Weight: 3.00 Pounds
See On Amazon #17
Dive Rite Travel/Sidemount Stage Strap - Small
Asin: B01B812YAI | Model: DR-GM2049-TS-5 | PartNumber: DR-GM2049-TS-5
Made In The U.S.A..
One-Inch (2.54 Cm) Nylon Webbing Strap With 2,200 Lbs (998 Kgs) Tensile Strength..
Gm2049-Ts-7 And Gm2049-Ts-5 Use A Deluxe 4-Inch Wide (10 Cm) Hose Retainer Made Of Proprietary, Stretch Material With Non-Slip Silicone Strips. A Secondary, 1-Inch Wide Hose Retainer Provides An Additional Point To Secure The Hose..
Choice Of Gm2049-Ts-7 For 7-Inch Diameter Tanks Or Gm2049-Ts-5 For 5-Inch Diameter Tanks. All Versions Come With A Tank Choker For Sidemount Divers Who Use A Stage Strap Set Up On Their Bottles. Strap Is Easily Disassembled And Re-Assembled, Giving The Abiltiy To Add Or Remove Hose Retainers As Needed..
Features
- Quickly set up stage, deco, or sidemount bottles without tools using our Travel Stage Straps. Two hose retainers (one deluxe, and one standard) and the 1.5 inch low profile cam strap are captured in the stage strap, keeping the entire set up connected as one piece. Adding and removing this kit from cylinders is easy, and losing pieces from the kit is nearly impossible. Use of a cam strap instead of a metal clamp allows divers to quickly set up, adjust or remove the straps. Marine grade stainless
- Choice of GM2049-TS-7 for 7-inch diameter tanks or GM2049-TS-5 for 5-inch diameter tanks. All versions come with a tank choker for sidemount divers who use a stage strap set up on their bottles. Strap is easily disassembled and re-assembled, giving the abiltiy to add or remove hose retainers as needed.
- Made in the U.S.A.
- GM2049-TS-7 and GM2049-TS-5 use a deluxe 4-inch wide (10 cm) hose retainer made of proprietary, stretch material with non-slip silicone strips. A secondary, 1-inch wide hose retainer provides an additional point to secure the hose.
- One-inch (2.54 cm) nylon webbing strap with 2,200 lbs (998 kgs) tensile strength.
- See more on Amazon...
Brand: Dive Rite | Manufacturer: Dive Rite
Dimensions: 12.00 x 12.00 x 2.00 Inches | Weight: 0.90 pounds
See On Amazon #18
Scuba Choice Tech Diving Stainless Steel Silver Backplate
Asin: B00BQ2CEDC | Model: SCBPP-01 | PartNumber: SCBPP-01 | Ean: 0608939471474 | UPC: 608939471474
1" And 2" Slots On The Bottom For Crotch Straps.
Plate Thickness: 2Mm.
3/8" Slots For Lift Bag Sleeves Or Other Accessories.
11" On-Center Holes For Mounting Doubles.
Features
- Measurement: 15" x 10"
- 11 on-center holes for mounting doubles
- 1 and 2 slots on the bottom for crotch straps
- 3/8 slots for lift bag sleeves or other accessories
- Plate thickness: 2mm
- See more on Amazon...
Brand: Scuba Choice | Manufacturer: Aqua Edge
Dimensions: 3.00 x 15.00 x 10.00 inches
Warranty: 30 day warranty against manufacturer defects
See On Amazon #19
Dive Rite Single Tank Adapter {13 in | 33 cm}, Black (BC1090)
Asin: B000EGJ16E | Model: BC1090 | PartNumber: BC1090 | Ean: 0879642000354 | UPC: 879642000354
Compatible With – Sta Is Compact And Compatible With All Dive Rite Aircells Includes - 2 Rubber Pads For A Secure Cylinder And All Stainless Hardware Required To Mount Sta To A Backplate.
Tips - To Avoid Unnecessary Wear And Tear, Remove Metal Backplates And Singles Mounting Plates From The Wing For Transport. Do Not Carry Metal Plates Stuffed Into A Dive Bag Along With A Wing And Other Soft Goods.
Tips - To Avoid Unnecessary Wear And Tear, Remove Metal Backplates And Singles Mounting Plates From The Wing For Transport. Do Not Carry Metal Plates Stuffed Into A Dive Bag Along With A Wing And Other Soft Goods.
Construction - Constructed Of Marine Grade 304 Stainless Steel And Allows Rapid Switch From Doubles To Singles.
Features
- SINGLE TANK ADAPTER - For divers who frequently switch between double tank and single tank rigs, Dive Rite single tank adapter is a convenient way to attach cam straps to a hard metal backplate that does not have tank band slots
- CONSTRUCTION - Constructed of marine grade 304 stainless steel and allows rapid switch from doubles to singles
- COMPATIBLE WITH STA is compact and compatible with ALL Dive Rite aircells INCLUDES - 2 rubber pads for a secure cylinder and all stainless hardware required to mount STA to a backplate
- TIPS - To avoid unnecessary wear and tear, remove metal backplates and singles mounting plates from the wing for transport. Do not carry metal plates stuffed into a dive bag along with a wing and other soft goods
- TIPS - To avoid unnecessary wear and tear, remove metal backplates and singles mounting plates from the wing for transport. Do not carry metal plates stuffed into a dive bag along with a wing and other soft goods
- See more on Amazon...
Brand: Dive Rite | Manufacturer: Dive Rite
Dimensions: 8.00 x 13.00 x 20.00 inches | Weight: 0.10 pounds
See On Amazon #20
Dive Rite Transplate Harness Only X-Large, Black
Asin: B01D8TT2NA | Model: DR-T3500XL | PartNumber: DR-T3500XL | Ean: 6527853381406
Modular Design Allows For Customization With A Wide Variety Of Pockets And Accessories.
Backplate, And Cam Straps Are Sold Separately..
Disperses Weight Across The Hips And Back, Minimizing Shoulder Strain.
Features
- Designed like a mountaineer's backpack
- Disperses weight across the hips and back, minimizing shoulder strain
- Modular design allows for customization with a wide variety of pockets and accessories
- Backplate, and cam straps are sold separately.
- See more on Amazon...
Brand: Dive Rite | Manufacturer: Dive Rite
Dimensions: 5.00 x 12.00 x 16.00 Inches
See On Amazon
Looking For Something Else?
Search