Drill America 9/64" Carbide Tipped Drill Bit, D/ACT Series
Asin: B00ARI24C2 | Model: D/ACT9/64 | PartNumber: D/ACT9/64 | Ean: 0887861009294 | UPC: 887861009294
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Not Recommended For Drilling Steel..
Jobber (Standard) Flute And Overall Length.
Used In The Production Of Cast Iron, Non-Ferrous Metals, And Many Composite Materials Such As Hard Rubber Or Copper Alloys.
Features
- Carbide tipped drills feature heavy-duty construction and heat treated body for optimum wear resistance and support of the carbide tip
- Used in the production of cast iron, non-ferrous metals, and many composite materials such as hard rubber or copper alloys
- Not recommended for drilling steel.
- Jobber (standard) flute and overall length
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon Similar To Drill America 9 64 Carbide
#1
Drill America - KFDRSD9/16 9/16" Reduced Shank High Speed Steel Black & Gold KFD Drill Bit with 1/2" Shank, KFD Series
Asin: B00AYZ2N5G | Model: KFDRSD9/16 | PartNumber: KFDRSD9/16 | Ean: 0887861037013 | UPC: 887861037013
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Heavy Duty 135 Degree Split Point.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold And Black Surface Treated For Use In Stainless Steel And Other Hard Metal Drilling.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Gold and black surface treated for use in stainless steel and other hard metal drilling
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Heavy duty 135 degree split point
- See more on Amazon...
Brand: Drill America | Manufacturer: Chicology
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #2
Drill America - GLBCOX69/64 9/64" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series, 1 Count (Pack of 1)
Asin: B00B2QYU2A | Model: GLBCOX69/64 | PartNumber: GLBCOX69/64 | Ean: 0887861045469 | UPC: 887861045469
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
6" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 6 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #3
Drill America - DWDA/CX129/32 9/32" x 12" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series
Asin: B00B2QY3JA | Model: DWDA/CX129/32 | PartNumber: DWDA/CX129/32 | Ean: 0887861044486 | UPC: 887861044486
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to national aerospace standard 907
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Weight: 2.01 Pounds
See On Amazon #4
Drill America - DWDA/CX69/64 9/64" x 6" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series, 1 Count (Pack of 1)
Asin: B00B1C8LS4 | Model: DWDA/CX69/64 | PartNumber: DWDA/CX69/64 | Ean: 0887861043236 | UPC: 887861043236
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to national aerospace standard 907
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
See On Amazon #5
Drill America - DWDCO9/16 9/16" Reduced Shank Cobalt Drill Bit with 1/2" Shank, DWDCO Series
Asin: B00FXHFRV2 | Model: DWDCO9/16 | PartNumber: DWDCO9/16 | Ean: 0887861041942 | UPC: 887861041942
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to National Aerospace standard 907
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #6
Drill America - DMOD9/64 9/64" Solid Carbide Drill Bit, DMOD Series
Asin: B00B4VJ76M | Model: DMOD9/64 | PartNumber: DMOD9/64 | Ean: 0887861047661 | UPC: 887861047661
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to National Aerospace Standard 907
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #7
Drill America - KFD9/64P12 9/64" High Speed Steel Black & Gold KFD Split Point Drill Bit (Pack of 12), KFD Series
Asin: B00FXN6AMQ | Model: KFD9/64P12 | PartNumber: KFD9/64P12 | Ean: 0887861206020 | UPC: 887861206020
135° Split Point Tip Prevents Drill From "Walking".
Black And Gold Drills Are Manufactured From Premium Grade High Speed Steel.
Combination Of Hardness And Toughness For Wear Resistance.
For Use In Wood, Metal, Stainless And Other Hard Metal Drilling.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- For use in wood, metal, stainless and other hard metal drilling
- 135 split point tip prevents drill from walking
- Combination of hardness and toughness for wear resistance
- Black and gold drills are manufactured from premium grade high speed steel
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #8
Drill America 9/64" Quick Change Cobalt Drill Bit with Hex Shank, COHEX Series
Asin: B0BTTSFDNK | Model: COHEX9/64 | PartNumber: COHEX9/64 | Ean: 0887861309806 | UPC: 887861309806
135 Degree Split Point Tip For Self-Centering And Reducing Thrust; Compared To A Conventional 118 Degree Tip, These Drills Wont Go "Walking" On You.
Manufactured To National Aerospace Standard 907.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
1/4 In. Hex Shank Can Be Used In Quick Change Impact Drivers.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 1/4 in. hex shank can be used in quick change impact drivers
- 135 degree split point tip for self-centering and reducing thrust; Compared to a conventional 118 degree tip, these drills wont go walking on you
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- Manufactured to National Aerospace standard 907
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #9
Drill America DMOD54 #54 Solid Carbide Drill Bit, DMOD Series, 1 Count (Pack of 1)
Asin: B00B4VJAG4 | Model: DMOD54 | PartNumber: DMOD54 | Ean: 0887861047067 | UPC: 887861047067
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to National Aerospace Standard 907
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #10
Drill America 9/64" Cobalt Heavy Duty Drill Bit (Pack of 12), D/ACO Series
Asin: B00FX6YTFS | Model: D/ACO9/64P12 | PartNumber: D/ACO9/64P12 | Ean: 0887861197885 | UPC: 887861197885
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to National Aerospace standard 907
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon
Looking For Something Else?
Search