Drill America #1 x 6" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series
Asin: B00B1CAOG6 | Model: DWDA/CX61 | PartNumber: DWDA/CX61 | Ean: 0887861042314 | UPC: 887861042314
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to national aerospace standard 907
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon Similar To Drill America 1 x 6
#1
Drill America DWTPT3/4 3/4"-14 NPT Pipe Tap, Carbon Steel, DWTPT Series
Asin: B00FXKW4F6 | Model: DWTPT3/4 | PartNumber: DWTPT3/4 | Ean: 0887861076302 | UPC: 887861076302
Round Shank With Square End.
Right-Hand Cut Tools Have A Cutting Action That Engages When They Are Run In A Clockwise Direction.
Straight Flute Tools Allow Chips To Collect In The Flutes As They Cut And Are Well Suited For Most Applications In Shallow Cuts.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shank with square end
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
- Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #2
Drill America - POUM8X1.25 m8 x 1.25 Tap and 6.75mm Drill Bit Kit, POU Series
Asin: B072HXJP2Q | Model: POUM8X1.25 | PartNumber: POUM8X1.25 | Ean: 0887861290289 | UPC: 887861290289
Black Oxide Drill Bit Is Ideal For Production, Maintenance Or Portable Drilling Jobs.
Set Comes In Plastic Pouch.
M8 X 1.25 Hss Plug Tap And Matching 6.75Mm Hss Drill Bit In Plastic Pouch.
High Speed Steel Plug Hand Threading Tap Is Popular For Use In General Machine Tapping Or Cnc Tapping.
Features
- Set contains high speed steel plug hand tap and matching high speed steel drill bit
- High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping
- Black oxide drill bit is ideal for production, maintenance or portable drilling jobs
- M8 x 1.25 hss plug tap and matching 6.75Mm hss drill bit in plastic pouch
- Set comes in plastic pouch
- See more on Amazon...
First Available: 05/11/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #3
Drill America - POU3/8NPTW/DRILL 3/8" Carbon Steel NPT Pipe Tap and 37/64" High Speed Steel Drill Bit Set, POU Series
Asin: B01MFG7R5Q | Model: POU3/8NPTW/DRILL | PartNumber: POU3/8NPTW/DRILL | Ean: 0887861241847 | UPC: 887861241847
3/8" Carbon Steel Npt Tap And 37/64" Hss Drill Bit With 1/2" Shank.
Set Contains Matching Npt Pipe Tap And High Speed Steel Drill Bit.
Set Comes In Plastic Pouch.
Black Oxide Drill Bit Is Ideal For Production, Maintenance Or Portable Drilling Jobs.
Features
- Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads
- Black oxide drill bit is ideal for production, maintenance or portable drilling jobs
- 3/8 carbon steel NPT tap and 37/64 HSS drill bit with 1/2 Shank
- Set comes in plastic pouch
- Set contains matching NPT pipe tap and high speed steel drill bit
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 0.51 pounds
See On Amazon #4
Drill America - DWD29J-CO-PC 29 Piece M35 Cobalt Drill Bit Set in Round Case (1/16" - 1/2" X 64ths), DWDCO Series
Asin: B00FXGOMIW | Model: DWD29J-CO-PC | PartNumber: DWD29J-CO-PC | Ean: 0887861039055 | UPC: 887861039055
Gold Oxide Finish Lubricates The Drill Bit And Provides Wear Resistance.
Meets Ansi Specifications.
Self-Centering 135-Degree Split Point Penetrates Hard Material Without A Pilot Hole And Produces Small Chips To Reduce Clogging.
Cobalt Steel Provides Extended Tool Life Compared To High-Speed Steel Drill Bits When Drilling Hard Materials.
Features
- Set of 29 jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments
- Cobalt steel provides extended tool life compared to high-speed steel drill bits when drilling hard materials
- Gold oxide finish lubricates the drill bit and provides wear resistance
- Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
- Meets ANSI specifications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Weight: 2.20 Pounds
See On Amazon #5
Drill America GLBCOX61/4 1/4" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series
Asin: B00B2R0GVI | Model: GLBCOX61/4 | PartNumber: GLBCOX61/4 | Ean: 0887861045537 | UPC: 887861045537
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
6" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 6 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 0.01 pounds
See On Amazon #6
Drill America 3/16" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series
Asin: B00B2QYJ9E | Model: GLBCOX63/16 | PartNumber: GLBCOX63/16 | Ean: 0887861045490 | UPC: 887861045490
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
6" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 6 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 0.00 pounds
See On Amazon #7
Drill America - KFDRSD3/8X5/8 5/8" Reduced Shank High Speed Steel Black & Gold KFD Drill Bit with 3/8" Shank, KFD Series
Asin: B01BKTNHMC | Model: KFDRSD3/8X5/8 | PartNumber: KFDRSD3/8X5/8 | Ean: 0887861227254 | UPC: 887861227254
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Heavy Duty 135 Degree Split Point.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold And Black Surface Treated For Use In Stainless Steel And Other Hard Metal Drilling.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Gold and black surface treated for use in stainless steel and other hard metal drilling
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Heavy duty 135 degree split point
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #8
Drill America - GLBCOX61/8 1/8" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series
Asin: B00B2R05FA | Model: GLBCOX61/8 | PartNumber: GLBCOX61/8 | Ean: 0887861045452 | UPC: 887861045452
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
6" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 6 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 2.00 inches
See On Amazon #9
Drill America - DWTMHX14X1.5 m14 X 1.5 Carbon Steel Hex Rethreading Die, DWT Series
Asin: B00FXKKX3Q | Model: DWTMHX14X1.5 | PartNumber: DWTMHX14X1.5 | Ean: 0887861105187, 7147905968219 | UPC: 887861105187
Hex Die Is For Dressing Over Bruised Or Rusty Threads.
Ideal For Maintenance In The Shop Or Field.
No Special Holder Is Required For This Type Of Die, Any Wrench Large Enough Will Suffice.
Right-Hand Cut Tools Have A Cutting Action That Engages When They Are Run In A Clockwise Direction.
Features
- Made of carbon steel
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
- Hex die is for dressing over bruised or rusty threads
- No special holder is required for this type of die, any wrench large enough will suffice
- Ideal for maintenance in the shop or field
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #10
Drill America - DWDRSD1 1" Reduced Shank High Speed Steel Drill Bit with 1/2" Shank, DWDRSD Series
Asin: B00FXIBJ9U | Model: DWDRSD1 | PartNumber: DWDRSD1 | Ean: 0887861034234 | UPC: 887861034234
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Drilling In Low And Medium Tensile Strength Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for drilling in low and medium tensile strength materials
- See more on Amazon...
Brand: Drill America | Manufacturer: Chicology
Dimensions: 0.80 x 7.70 x 1.70 inches | Weight: 0.55 pounds
See On Amazon #11
Drill America - GLBCOX67/32 7/32" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series, 1 Count (Pack of 1)
Asin: B00B2QZ11Y | Model: GLBCOX67/32 | PartNumber: GLBCOX67/32 | Ean: 0887861045513 | UPC: 887861045513
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
6" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 6 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #12
Drill America GLBCOX65/32 5/32" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series
Asin: B00B2R0UOQ | Model: GLBCOX65/32 | PartNumber: GLBCOX65/32 | Ean: 0887861045476 | UPC: 887861045476
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
6" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 6 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
See On Amazon #13
Drill America - DWDA/CX61/8 1/8" x 6" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series
Asin: B00B1C8OTU | Model: DWDA/CX61/8 | PartNumber: DWDA/CX61/8 | Ean: 0887861043229 | UPC: 887861043229
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to national aerospace standard 907
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #14
Drill America DWTS6X1 m6 x 1 High Speed Steel 4 Flute Hand Tap Set, DWT Series,Uncoated (Bright)
Asin: B00FXKXW48 | Model: DWTS6X1 | PartNumber: DWTS6X1 | Ean: 0887861072250 | UPC: 887861072250
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #15
Drill America - DWDA/CX121/8 1/8" x 12" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series
Asin: B00B2QWSME | Model: DWDA/CX121/8 | PartNumber: DWDA/CX121/8 | Ean: 0887861044387 | UPC: 887861044387
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to national aerospace standard 907
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #16
Drill America - GLBCOX69/64 9/64" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series, 1 Count (Pack of 1)
Asin: B00B2QYU2A | Model: GLBCOX69/64 | PartNumber: GLBCOX69/64 | Ean: 0887861045469 | UPC: 887861045469
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
6" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 6 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #17
Drill America DWTT1/2-13 1/2"-13 Carbon Steel Taper Tap (Pack of 1), DWT Series, Uncoated (Bright)
Asin: B01EOD2EW0 | Model: DWTT1/2-13 | PartNumber: DWTT1/2-13 | Ean: 0887861077491 | UPC: 887861077491
Carbon Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Straight Flute Tools Allow Chips To Collect In The Flutes As They Cut And Are Well Suited For Most Applications In Shallow Cuts.
Carbon Steel Hand Taps May Also Be Used To Thread Mild Steels.
Features
- Used to re-thread damaged and/or jammed threads
- Carbon Steel Hand Taps may also be used to thread mild steels
- Carbon steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #18
Drill America-GLBCOX611/64 11/64" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series
Asin: B00B2R09H4 | Model: GLBCOX611/64 | PartNumber: GLBCOX611/64 | Ean: 0887861045483 | UPC: 887861045483
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
6" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 6 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches | Weight: 1.00 pounds
See On Amazon #19
Drill America-DWDDL8X3/16 3/16" x 8" High Speed Steel Extra Long Drill Bit, DWDDL Series, Uncoated (Bright)
Asin: B00FXHOGGO | Model: DWDDL8X3/16 | PartNumber: DWDDL8X3/16 | Ean: 0887861060479 | UPC: 887861060479
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #20
Drill America - DWDDL8X5/16 5/16" x 8" High Speed Steel Extra Long Drill Bit, DWDDL Series
Asin: B00FXHOL1O | Model: DWDDL8X5/16 | PartNumber: DWDDL8X5/16 | Ean: 0887861060554 | UPC: 887861060554
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon
Looking For Something Else?
Search