Drill America DWTSMR112-15X1 m15 X 1 1-1/2" OD High Speed Steel Round Adjustable Die, DWT Series
Asin: B00CTSA3Q2 | Model: DWTSMR112-15X1 | PartNumber: DWTSMR112-15X1 | Ean: 0887861110464 | UPC: 887861110464
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Round Die Is Chamfered On Both Faces.
The Slot Is Beveled.
Adjustment Is Obtained By A Fine Pitch Screw Which Forces The Sides Of The Die Apart, Or Allows Them To Spring Together.
Right-Hand Cut Tools Have A Cutting Action That Engages When They Are Run In A Clockwise Direction.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
- Round die is chamfered on both faces
- Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
- The slot is beveled
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Weight: 1.00 Pounds
See On Amazon Similar To Drill America DWTSMR11215X1 m15 X
#1
Drill America - DWDRSD15.0MM 15.00mm Reduced Shank High Speed Steel Drill Bit with 1/2" Shank, DWDRSD Series
Asin: B00FXIACMA | Model: DWDRSD15.0MM | PartNumber: DWDRSD15.0MM | Ean: 0887861035484 | UPC: 887861035484
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Drilling In Low And Medium Tensile Strength Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for drilling in low and medium tensile strength materials
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 0.50 x 8.00 x 0.50 inches | Weight: 0.30 Pounds
See On Amazon #2
Drill America - DWTSMT15X1.5 m15 x 1.5 High Speed Steel Plug Tap, (Pack of 1)
Asin: B00BD5LLN6 | Model: DWTSMT15X1.5 | PartNumber: DWTSMT15X1.5 | Ean: 0887861074230 | UPC: 887861074230
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #3
Drill America m16 x 1.5 High Speed Steel 4 Flute Hand Tap Set, DWT Series
Asin: B00FXKX0KO | Model: DWTS16X1.5 | PartNumber: DWTS16X1.5 | Ean: 0887861072694 | UPC: 887861072694
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #4
Drill America - DWTCS14X1.5S m14 X 1.5 Carbon Steel Tap Set (Set of 3), DWT Series
Asin: B00FXK7NIY | Model: DWTCS14X1.5S | PartNumber: DWTCS14X1.5S | Ean: 0887861098465 | UPC: 887861098465
Carbon Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Straight Flute Tools Allow Chips To Collect In The Flutes As They Cut And Are Well Suited For Most Applications In Shallow Cuts.
Carbon Steel Hand Taps May Also Be Used To Thread Mild Steels.
Features
- Used to re-thread damaged and/or jammed threads
- Carbon Steel Hand Taps may also be used to thread mild steels
- Carbon steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #5
Drill America - DWTCS112-16X1.5 m16 X 1.5 1-1/2" OD Carbon Steel Round Die, DWT Series
Asin: B00CTS9ZPC | Model: DWTCS112-16X1.5 | PartNumber: DWTCS112-16X1.5 | Ean: 0887861099141 | UPC: 887861099141
One Side Has A 2 To 3 Thread Chamfer For Threading, The Other Side Has A 1 To 1-1/2 Thread Chamfer For Threading Close To A Shoulder..
The Slot Is Beveled So That When The Dies Are Used In A Machine Holder The Adjusting Screw Can Be Removed And Adjustment Made By The Adjusting Screws In The Holder.
Adjustment Is Obtained By A Fine Pitch Screw Which Forces The Sides Of The Die Apart, Or Allows Them To Spring Together..
Round Dies Are Chamfered On Both Faces..
Features
- Carbon Steel Round Adjustable Die is desired for improved wear life.
- Round Dies are chamfered on both faces.
- One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder.
- Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together.
- The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holder
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Weight: 0.99 Pounds
See On Amazon #6
Drill America POU1-14 1"-14 Tap and 15/16" Drill Bit Kit, POU Series
Asin: B06ZYK756R | Model: POU1-14 | PartNumber: POU1-14 | Ean: 0887861290067 | UPC: 887861290067
Black Oxide Drill Bit Is Ideal For Production, Maintenance Or Portable Drilling Jobs.
Set Comes In Plastic Pouch.
1"-14 Hss Plug Tap And Matching 15/16" Hss 1/2" Shank Drill Bit In Plastic Pouch.
High Speed Steel Plug Hand Threading Tap Is Popular For Use In General Machine Tapping Or Cnc Tapping.
Features
- Set contains high speed steel plug hand tap and matching high speed steel drill bit
- High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping
- Black oxide drill bit is ideal for production, maintenance or portable drilling jobs
- 1-14 hss plug tap and matching 15/16 hss 1/2 shank drill bit in plastic pouch
- Set comes in plastic pouch
- See more on Amazon...
First Available: 04/20/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #7
Drill America DWT64008 DWT Series Qualtech High-Speed Steel Pipe Tap, 1/2"-14 NPT
Asin: B01DZD1XRM | Model: DWT64008 | PartNumber: DWT64008 | Ean: 0887861075978 | UPC: 887861075978
Round Shank With Square End.
Right-Hand Cut Tools Have A Cutting Action That Engages When They Are Run In A Clockwise Direction.
Straight Flute Tools Allow Chips To Collect In The Flutes As They Cut And Are Well Suited For Most Applications In Shallow Cuts.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shank with square end
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
- Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction
- See more on Amazon...
First Available: 05/15/2017
Brand: Drill America | Manufacturer: Drill America
See On Amazon #8
Drill America DWTP16X1.5 m16 x 1.5 High Speed Steel 4 Flute Plug Tap, (Pack of 1)
Asin: B00FXKTBG6 | Model: DWTP16X1.5 | PartNumber: DWTP16X1.5 | Ean: 0887861072670 | UPC: 887861072670
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #9
Drill America - DWTSMH15X1 m15 X 1 Carbon Steel Hex Rethreading Die, DWT Series
Asin: B00CTS9DWW | Model: DWTSMH15X1 | PartNumber: DWTSMH15X1 | Ean: 0887861108492 | UPC: 887861108492
Hex Die Is For Dressing Over Bruised Or Rusty Threads.
Ideal For Maintenance In The Shop Or Field.
No Special Holder Is Required For This Type Of Die, Any Wrench Large Enough Will Suffice.
Right-Hand Cut Tools Have A Cutting Action That Engages When They Are Run In A Clockwise Direction.
Features
- Made of carbon steel
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
- Hex die is for dressing over bruised or rusty threads
- No special holder is required for this type of die, any wrench large enough will suffice
- Ideal for maintenance in the shop or field
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #10
Drill America DWTS14X1.5 m14 x 1.5 High Speed Steel 4 Flute Hand Tap Set, DWT Series
Asin: B00FXKWZ0U | Model: DWTS14X1.5 | PartNumber: DWTS14X1.5 | Ean: 0887861072618 | UPC: 887861072618
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #11
Qualtech 15/16"-16 HSS Plug Hand Tap, DWTST15/16-16P
Asin: B00BW9CUXS | Model: DWTST15/16-16P | PartNumber: DWTST15/16-16P | Ean: 0887861089739 | UPC: 887861089739
Features
- Size: 15/16-16, Material: High Speed Steel, Finish: Uncoated (Bright), Style: Plug, Cutting Direction: Right Hand, Tap Size: 15/16, Threads Per Inch: 16
- See more on Amazon...
Brand: Drill America | Manufacturer: Qualtech
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #12
Drill America DWTG16X1.5 m16 x 1.5 High Speed Steel 3 Flute Spiral Point Tap, DWT Series
Asin: B00FXKCA5U | Model: DWTG16X1.5 | PartNumber: DWTG16X1.5 | Ean: 0887861075831 | UPC: 887861075831
Allow For Chip Accumulation In The Bottom Of The Hole.
High Speed Steel Spiral Point Tap.
Ideal For Threading A Wide Variety Of Ductile Materials, Copper And Copper Alloys, Brass And Non-Metallics.
They Are Recommended For Use In Through Or Blind Holes.
Features
- Tap shoots chips ahead of the cutting action reducing loading and clogging in the flutes
- They are recommended for use in through or blind holes
- Allow for chip accumulation in the bottom of the hole
- Ideal for threading a wide variety of ductile materials, copper and copper alloys, brass and non-metallics
- High speed steel spiral point tap
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #13
Drill America m15 x 1.5 Tap and 13.50mm Drill Bit Kit, POU Series
Asin: B0CTVZ9G4H | Model: POUMS15X1.5 | PartNumber: POUMS15X1.5 | Ean: 0887861311984 | UPC: 887861311984
Black Oxide Drill Bit Is Ideal For Production, Maintenance Or Portable Drilling Jobs.
Set Comes In Plastic Pouch.
M15 X 1.5 Hss Plug Tap And Matching 13.50Mm Hss Drill Bit With 1/2" Shank.
High Speed Steel Plug Hand Threading Tap Is Popular For Use In General Machine Tapping Or Cnc Tapping.
Features
- Set contains high speed steel plug hand tap and matching high speed steel drill bit
- High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping
- Black oxide drill bit is ideal for production, maintenance or portable drilling jobs
- m15 x 1.5 HSS plug tap and matching 13.50mm HSS drill bit with 1/2 shank
- Set comes in plastic pouch
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #14
Drill America INS05-TT15 Tamper Resistant Insert Bits, T-15
Asin: B01BSZMT0Y | Model: INS05-TT15 | PartNumber: INS05-TT15 | Ean: 0887861186179 | UPC: 887861186179
For Metal.
Country Of Origin: United States.
Sold Individually.
First Available: 05/15/2017
Brand: Drill America | Manufacturer: Drill America
Weight: 0.99 Pounds
See On Amazon #15
Drill America DWT Series Qualtech High-Speed Steel Hand Threading Tap, Uncoated (Bright) Finish, Round with Square End Shank, Taper Chamfer, M14 x 1.5 Size (Pack of 1)
Asin: B00DLCVEXG | Model: DWTT14X1.5 | PartNumber: DWTT14X1.5 | Ean: 0887861072588 | UPC: 887861072588
Features
- Size: m14 x 1.5, Material: High Speed Steel, Finish: Uncoated (Bright), Style: Taper, Cutting Direction: Right Hand, Tap Size: m14, Threads Per Inch: 1.5
- See more on Amazon...
Brand: Drill America | Manufacturer: Qualtech
Dimensions: 0.70 x 4.70 x 0.80 Inches | Weight: 2.01 Pounds
See On Amazon #16
Drill America DWRRHD15.0MM 15.00mm High Speed Steel Hand Reamer, DWR Series
Asin: B00DMF12AW | Model: DWRRHD15.0MM | PartNumber: DWRRHD15.0MM | Ean: 0887861147514 | UPC: 887861147514
Bright Finish.
Hand Reamer.
Brand: Drill America | Manufacturer: Drill America
See On Amazon
Looking For Something Else?
Search