NTE Electronics NTE3090 Optoisolator with Schmitt Trigger Output, 6 Lead DIP Type Package, 6V
Asin: B00DEDA550 | Model: NTE3090 | PartNumber: NTE3090 | Ean: 0768249134916 | UPC: 768249134916
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.High Data Rate: 1Mhz Typical (Nrz).
Microprocessor Compatible Drive.
Wide Supply Voltage Capability.
Built–In On/Off Threshold Hysteresis.
Features
- Guaranteed Switching Times: ton, toff < 4 s
- Built In ON/OFF Threshold Hysteresis
- High Data Rate: 1MHz Typical (NRZ)
- Wide Supply Voltage Capability
- Microprocessor Compatible Drive
- See more on Amazon...
First Available: 03/12/2017
Brand: LED Group Buy | Manufacturer: NTE Electronics, Inc.
Weight: 0.05 Pounds
See On Amazon Similar To NTE Electronics NTE3090 Optoisolator with
#1
NOYITO PC817 4-Channel Optocoupler Isolation Board Voltage Converter Adapter Module 3.6-30V Driver Photoelectric Isolated Module
Asin: B07GMHLL2M | Model: NOPC8174C | PartNumber: NOPC8174C | Ean: 0667797752569 | UPC: 667797752569
It Can Realize 3.3V Or 5V To Control The Interface Of 3.6-30V Voltage . After The Control Terminal Is Turned On, The Controlled Terminal Will Also Be Turned On..
【8-Channel Optocoupler Isolation Board Asin ： B09rgtbdkj 】 Noyito Pc817 4-Channel Optocoupler Isolation Board User Manual Https://1Drv.Ms/U/S!Alzqucoyzqhkgt98ibtg22r8w5eq?E=Vfkbrk.
Photoelectric Isolation Has Strong Anti-Interference Ability. It Can Drive High-Power Triodes, Mos Tubes And Other Applications That Require High-Voltage Driving, And Can Also Directly Drive Low-Power 24V Relays.If It Is A Pulse Signal, Please Note That The Limit Of 817 Is 4Khz Or Less. If The Control Signal Is Greater Than 4Khz, Please Do Not Use This Module, It Will Not Work Properly..
Drive Terminal Signal Voltage: 3.6-24V. Output Terminal Voltage Range: 3.6-30V (Output Current Depends On The Specific Situation But The Maximum Does Not Exceed 10Ma, The Total Power Is Constant, The Voltage And Current Are Inversely Proportional).
Features
- This module is used when it comes to the need for isolation control and voltage conversion.
- Drive terminal signal voltage: 3.6-24V. Output terminal voltage range: 3.6-30V (output current depends on the specific situation but the maximum does not exceed 10MA, the total power is constant, the voltage and current are inversely proportional)
- It can realize 3.3V or 5V to control the interface of 3.6-30V voltage . After the control terminal is turned on, the controlled terminal will also be turned on.
- Photoelectric isolation has strong anti-interference ability. It can drive high-power triodes, MOS tubes and other applications that require high-voltage driving, and can also directly drive low-power 24V relays.If it is a pulse signal, please note that the limit of 817 is 4KHZ or less. If the control signal is greater than 4KHZ, please do not use this module, it will not work properly.
- 8-Channel Optocoupler Isolation Board ASIN B09RGTBDKJ NOYITO PC817 4-Channel Optocoupler Isolation Board User Manual https://1drv.ms/u/s!AlzQUCOyZQhKgT98ibtG22R8W5eQ?e=VfKbrK
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.39 x 0.71 x 1.50 inches | Weight: 0.03 pounds
Warranty: Manufacturer's One-year After-sale Warranty
See On Amazon #2
5 PCS Optocoupler Isolation Board, Icstation DC 12V Optocoupler Isolation Module EL817 1 Channel Opto PNP NPN Signal Converter, Isolator High-Level Trigger 80KHz
Asin: B01L1OI1HC | Model: EL817 1CH Optocoupler Isolation Board | PartNumber: EL817 1CH Optocoupler Isolation Board
【Level Converter】Opto-Isolators Can Be Used As Level Converters (Npn-Pnp, Pnp-Npn), Signal Input To Mcu In Isolation, Or Mcu-Controlled Device Output In Isolation..
【Functional Application】Devices For Microprocessor Input/Output Switching, Dc/Ac Power Control, Communications Equipment Protection, And Power Supply Regulation..
【Control Transformer】Optocoupler Isolation Board Provide Isolation Between Low And High-Voltage Circuits When Used With Other Electronic Devices..
【Signal Voltage】Positive Phase Amplification With High-Level Trigger. Output Equals Input..
Features
- Relay Switch Module 5pcs 1-channel photocoupler isolator with stable performance, triggered by DC 12V and 1mA current.
- Signal Voltage Positive phase amplification with high-level trigger. Output equals input.
- Level Converter Opto-isolators can be used as level converters (NPN-PNP, PNP-NPN), signal input to MCU in isolation, or MCU-controlled device output in isolation.
- Control Transformer Optocoupler isolation board provide isolation between low and high-voltage circuits when used with other electronic devices.
- Functional Application Devices for microprocessor Input/Output switching, DC/AC power control, communications equipment protection, and power supply regulation.
- See more on Amazon...
Brand: IS | Manufacturer: Icstation
Dimensions: 0.55 x 1.10 x 0.59 inches | Weight: 0.02 pounds
See On Amazon #3
BOJACK PC817 OPTOCOUPLER DIP Installation PC817C 2.54 mm Pitch 4-pin DIP-4 (Pack of 50 pcs)
Asin: B08CXRHDHP | Ean: 0759838089656 | UPC: 759838089656
Needle Distance: 2.54Mm.
Application: Pc817 Photocoupler Is Widely Used In Computer Terminals, Scr System Equipment, Measuring Instruments, Photocopiers, Automatic Ticketing, Household Appliances.
Package Quantity: 50 Pieces, Packed In A Durable And Resealable Plastic Storage Box..
Number Of Pins: 4.
Features
- Photocoupler output type: phototransistor
- Number of pins: 4
- Needle distance: 2.54mm
- Package quantity: 50 pieces, packed in a durable and resealable plastic storage box.
- Application: PC817 photocoupler is widely used in computer terminals, SCR system equipment, measuring instruments, photocopiers, automatic ticketing, household appliances
- See more on Amazon...
Brand: BOJACK | Manufacturer: BOJACK
See On Amazon #4
Gikfun OPTOCOUPLER DIP-4 PC817C PC817 for Arduino DIY (Pack of 20pcs) AE1143
Asin: B01JG8EJVW | Model: LYSB01GYH74O2-ELECTRNCS | PartNumber: LYSB01GYH74O2-ELECTRNCS | Ean: 0728821641362, 0634894436395 | UPC: 634894436395, 728821641362
Pin Pitch: 2.54Mm.
Used Widely In Computer Terminals, System Appliances, Measuring Instruments, Registers, Copiers, Automatic Vending Machines Etc.
Optocoupler Output Type: Optical Transistor.
Number Of Pin: 4.
Features
- Gikfun Packing 20pcs OPTOCOUPLER DIP-4 PC817C PC817
- Number of Pin: 4
- Pin Pitch: 2.54mm
- Optocoupler Output Type: optical transistor
- Used widely in computer terminals, system appliances, measuring instruments, registers, copiers, automatic vending machines etc
- See more on Amazon...
Brand: Gikfun | Manufacturer: Esooho
Dimensions: 0.20 x 5.00 x 3.50 inches
See On Amazon #5
NOYITO 1-Channel PC817 Optocoupler Isolation Module Optoelectronic Isolator Signal Isolation and Anti-Interference 3-5V 12V 24V (Pack of 2) (3-5V)
Asin: B0B5373L4P
The Module Can Also Be Used For Current Amplification. For Example, When The Output Current Of The Microcontroller Is Too Small To Drive Certain Circuits, This Module Can Be Used For Amplification..
Output Signal Voltage: Wide Voltage, Suitable For Dc1.8 - 24V..
Input Signal Voltage: 3-5V / 12V / 24V (Optional)..
The Module Can Be Used For High-Voltage Detection. For Example, If The Output Signal Level Of A Sensor Is 12V, And The Voltage Of The Microcontroller Is 5V, This Module Can Be Used For Isolation Detection..
Features
- NOYITO 1-Channel PC817 Optocoupler Isolation module adopts 5.0 pitch screw terminals for easy wiring . The module can play the role of isolation when the output level of the single-chip microcomputer drives the inductive devices such as motors and motors, and protect part of the circuit of the single-chip microcomputer against interference
- The module can be used for high-voltage detection. For example, if the output signal level of a sensor is 12V, and the voltage of the microcontroller is 5V, this module can be used for isolation detection.
- The module can also be used for current amplification. For example, when the output current of the microcontroller is too small to drive certain circuits, this module can be used for amplification.
- Input signal voltage: 3-5V / 12V / 24V (optional).
- Output signal voltage: wide voltage, suitable for DC1.8 - 24V.
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.47 x 2.60 x 0.65 inches
Warranty: One Year
See On Amazon #6
HiLetgo 3pcs TLP281 Optocoupler Isolation Board Optical Coupler Isolation Module 4 Channel Optical Coupler Isolation Module High/Low Level Expansion Board
Asin: B01MRR4K6Z
Connecting Digital Systems (Like A 5V Microcontroller) To A High-Voltage Or Noisy System.
A Normal Led Opto-Isolator Will Invert The Logic Of A Signal.
A Higher Voltage Than The Ttl Logic On The (3.3V Or 5V) Micro.
Pcb Size: 25Mm X 26Mm.
Features
- TLP281 4 Channel Optical Coupler Isolation Module
- PCB Size: 25mm x 26mm
- Connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system
- A higher voltage than the TTL logic on the (3.3V or 5V) micro
- A normal LED opto-isolator will invert the logic of a signal
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #7
HiLetgo 2pcs PC817 2 Channel Optocoupler Isolation Board 817 Voltage Isolation Module Voltage Converter Module 3.6-30V Photoelectric Isolated Module(2/4/8 Channel Optional)
Asin: B0CFZGGGSY
The Jumper Cap Can Be Used To Determine Whether The Output Terminal Is High Potential Output Or Low Output..
Pack Of 2 Pieces, It Means You Will Get Them Two Same Units In One Type, Not Two Mixed Types..
Each Channel Of Pc817 Optocoupler Isolation Board Is Independent, Can Control Different Voltage At Then Same Time.
Features
- PC817 Optocoupler Isolation Board 2/4/8 Channel 817 Voltage Isolation Module
- Each channel of PC817 Optocoupler Isolation Board is independent, can control different voltage at then same time
- The jumper cap can be used to determine whether the output terminal is high potential output or low output.
- Pack of 2 pieces, it means you will get them two SAME units in one type, not two mixed types.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #8
DONGKER Optocoupler Isolation Board,DC 3.3V 5V PNP NPN 8-Channel Signal Converter Opto Voltage Isolation Module
Asin: B08LYQQ7X6 | Model: 1 | PartNumber: 1 | Ean: 0770264202464 | UPC: 770264202464
Npn / Pnp (Low/High Level) Signal Output..
Dc 1.8V-24V Load Voltage..
Support Dc 3.3V~5V Input..
8-Channel Input And Output..
Features
- Optocoupler isolation control.
- 8-Channel input and output.
- NPN / PNP (Low/High level) signal output.
- Support DC 3.3V~5V Input.
- DC 1.8V-24V load voltage.
- See more on Amazon...
Brand: DONGKER | Manufacturer: DONGKER
See On Amazon #9
Alinan 4pcs 4CH Optocoupler PC817 4 Channel Isolation Board Voltage Converter Adapter Module 3.6-30V Driver Photoelectric Isolated Module
Asin: B09ZH6D7CQ | Model: Alinan | PartNumber: Alinan | Ean: 0701715514935 | UPC: 701715514935
★Photoelectric Isolation Has Strong Anti-Interference Ability. Can Drive Big Behindpower Triodes, Mos Tubes, Etc., Where High Voltage Driving Is Required, Can Also Directly Drive Low Power 24V Relays..
★Through The Jumper Cap Can Achieve Whether The Output Is High Potential Output Or Low Output.The 4Th And 817 On The Board Are Independent, Which Can Realize Simultaneous Control Of Different Voltages, Etc..
★If It Is A Pulse Signal, Please Note That The Limit Of 817 Is Below 4Khz. If The Control Signal Is Greater Than 4Khz, Please Do Not Use This Module, It Will Not Work Properly..
★Can Realize 3.3V Or 5V To Control The Interface Of 3.6-30V Voltage . After The Control Terminal Is Turned On, The Controlled Terminal Will Also Be Turned On..
Features
- Driving Port Signal Voltage: 3.6-24V; Output Port Voltage Port: 3.6-30V
- Can realize 3.3V or 5V to control the interface of 3.6-30V voltage . After the control terminal is turned on, the controlled terminal will also be turned on.
- Photoelectric isolation has strong anti-interference ability. Can drive big behindPower triodes, MOS tubes, etc., where high voltage driving is required, can also directly drive low power 24V relays.
- If it is a pulse signal, please note that the limit of 817 is below 4KHZ. If the control signal is greater than 4KHZ, please do not use this module, it will not work properly.
- Through the jumper cap can achieve whether the output is high potential output or low output.The 4th and 817 on the board are independent, which can realize simultaneous control of different voltages, etc.
- See more on Amazon...
Brand: Alinan | Manufacturer: Alinan
See On Amazon #10
Ximimark 50Pcs PC817C Optocoupler IC Chip DIP-4 Transistor Output Optocoupler Optical Isolator
Asin: B07L75XH51 | Ean: 0657835637316 | UPC: 657835637316
Signal Transmission Between Circuits Of Different Potentials And Impedances..
Registers, Copiers, Automatic Vending Machines,Electric Home Appliances, Such As Fan Heaters, Etc..
System Appliances, Measuring Instruments..
High Isolation Voltage Between Input And Output ( Viso=5000V Rms ).
Features
- Current transfer ratio(CTR: MIN. 50% at I F = 5mA ,VCE=5V)
- High isolation voltage between input and output ( Viso=5000V rms )
- Signal transmission between circuits of different potentials and impedances.
- System appliances, measuring instruments.
- Registers, copiers, automatic vending machines,Electric home appliances, such as fan heaters, etc.
- See more on Amazon...
Brand: Ximimark | Manufacturer: Ximimark
See On Amazon #11
NOYITO 4-Channel Optocoupler Photoelectric Isolator Module Level Voltage Converter Module PLC Signal Converter Module PNP NPN to NPN (12V to 3.3V)
Asin: B07TCVTD2K | Ean: 0680613662576 | UPC: 680613662576
Pcb Size: 45X72mm. Module Size: 48X86x40mm (Lxwxh)..
Noyito 4-Channel Optocoupler Photoelectric Isolator Module User Manual Https://1Drv.Ms/U/S!Alzqucoyzqhkgq3dvpz6np9zl2rw?E=Oesws9.
Widely Used, It Can Be Used For Signal Isolation, Level Conversion Between Signals Such As Single Chip Microcomputer And Plc. Pnp,Npn Signal To Npn Signal, Signal Level Conversion And Other Uses..
The Power Supply Has Anti-Connection Protection. The Limit Conversion Frequency Is 20Khz..
Features
- NOYITO 4-Channel Optocoupler Photoelectric Isolator Module Level Voltage Converter Module with high quality optocoupler and LED patch indicator.
- The power supply has anti-connection protection. The limit conversion frequency is 20Khz.
- PCB size: 45x72mm. Module size: 48x86x40mm (LxWxH).
- Widely used, it can be used for signal isolation, level conversion between signals such as single chip microcomputer and PLC. PNP,NPN signal to NPN signal, signal level conversion and other uses.
- NOYITO 4-Channel Optocoupler Photoelectric Isolator Module User Manual https://1drv.ms/u/s!AlzQUCOyZQhKgQ3dvpz6np9ZL2Rw?e=oESws9
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.59 x 3.39 x 1.89 inches
Warranty: Manufacturer's One-year After-sale Warranty
See On Amazon #12
ACEIRMC 4pcs 8CH Optocoupler PC817 8 Channel Isolation Board Voltage Converter Adapter Module 3.6-30V Driver Photoelectric Isolated Module (8CH Optocoupler)
Asin: B0BM4GWZHX | Ean: 0701715447219 | UPC: 701715447219
Through The Jumper Cap Can Achieve Whether The Output Is High Potential Output Or Low Output.The 4Th And 817 On The Board Are Independent, Which Can Realize Simultaneous Control Of Different Voltages, Etc..
Can Realize 3.3V Or 5V To Control The Interface Of 3.6-30V Voltage . After The Control Terminal Is Turned On, The Controlled Terminal Will Also Be Turned On..
If It Is A Pulse Signal, Please Note That The Limit Of 817 Is Below 4Khz. If The Control Signal Is Greater Than 4Khz, Please Do Not Use This Module, It Will Not Work Properly..
Photoelectric Isolation Has Strong Anti-Interference Ability. Can Drive Big Behindpower Triodes, Mos Tubes, Etc., Where High Voltage Driving Is Required, Can Also Directly Drive Low Power 24V Relays..
Features
- The PC817 Optocoupler Isolation Board used when it comes to the need for isolation control and voltage conversion.
- Photoelectric isolation has strong anti-interference ability. Can drive big behindPower triodes, MOS tubes, etc., where high voltage driving is required, can also directly drive low power 24V relays.
- Through the jumper cap can achieve whether the output is high potential output or low output.The 4th and 817 on the board are independent, which can realize simultaneous control of different voltages, etc.
- If it is a pulse signal, please note that the limit of 817 is below 4KHZ. If the control signal is greater than 4KHZ, please do not use this module, it will not work properly.
- Can realize 3.3V or 5V to control the interface of 3.6-30V voltage . After the control terminal is turned on, the controlled terminal will also be turned on.
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: ACEIRMC
See On Amazon #13
Bridgold 50pcs PC817c PC817 for Arduino DIY Through Hole transistor output optocoupler,4-Pin
Asin: B07MMF4QRX | Model: Bridgold-24 | PartNumber: Bridgold-24 | Ean: 7757695734941
4 Pins, Dual Row, 2.54Mm Pitch.Used Widely In Computer Terminals.
Material : Plastic, Metal.
Size : 8 X 4 X 7Mm/0.3" X 0.2" X 0.3" (L*W*H).
Type:Integrated Circuits.
Features
- Supply Voltage:international standard
- Type:Integrated Circuits
- 4 pins, dual row, 2.54mm pitch.Used widely in computer terminals
- Size : 8 x 4 x 7mm/0.3 x 0.2 x 0.3 (L*W*H)
- Material : Plastic, Metal
- See more on Amazon...
Brand: Bridgold | Manufacturer: Bridgold
See On Amazon #14
DONGKER Optical Isolator Module,12V Photoelectric Optoisolator PNP NPN Signal Converter PC817 Optocoupler Optoisolator
Asin: B07YJL3MQQ | Model: AAQ-WYY-9192 | PartNumber: AAQ-WYY-9192 | Ean: 0778836782307 | UPC: 778836782307
❤Isolator High-Level Trigger 80Khz, Scm Outpput Level Is Low,And Driven Module Voltage Is High.
❤Shop With Confidence: To Provide You With The Highest Quality Service, If You Have Any Question, Please Feel Free To Contact Us.We Will Provide After-Sales Service Until You Are Satisfied..
❤Can Be Applied To Inverter,Which Can Invert Output The Input Signal, High Voltage Testing, Current Amplification.
❤El817 Photoelectric Isolator, Scm Output Level Can Be Used To Isolating,Anti-Interference And Protect Scm Some Circuit When Driving Motor.
Features
- Optocoupler Isolation Board Voltage more than 3000V . Input Current:50MA(MAX). Operating Current:more than 1MA. Output Maximum Current:50MA (when input voltage is within the range of 15 20MA)
- EL817 photoelectric isolator, SCM output level can be used to isolating,anti-interference and protect SCM some circuit when driving motor
- Isolator High-Level Trigger 80KHz, SCM outpput level is low,and driven module voltage is high
- Can be applied to inverter,which can invert output the input signal, High Voltage Testing, Current Amplification
- SHOP WITH CONFIDENCE: To Provide You With the Highest Quality Service, If You Have Any Question, Please Feel Free to Contact Us.We Will Provide After-sales Service Until You Are Satisfied.
- See more on Amazon...
Brand: DONGKER
See On Amazon #15
NTE Electronics NTE3042 Optoisolator with NPN Transistor Output, 6 Lead DIP Type Package, 3V, 3 Amp
Asin: B0002FRCXQ | Model: NTE3042 | PartNumber: NTE3042 | Ean: 0768249130017 | UPC: 768249130017
Low Cost Dual–In–Line (Dip) Package.
Package Weight : 0.091 Kilograms.
High Dc Current Transfer Ratio.
Features
- 1500V Isolation
- High DC Current Transfer Ratio
- Low Cost Dual In Line (DIP) Package
- Package Weight : 0.091 kilograms
- See more on Amazon...
Brand: LED Group Buy | Manufacturer: NTE Electronics, Inc.
Weight: 0.00 pounds
See On Amazon #16
Treedix Opto-Isolator Breakout Board with Two Photodiodes Built-in Comes with 2 Channel Coupler for Blocking Circuit
Asin: B09MHPRD5K | Ean: 0764784799177 | UPC: 764784799177
The Breakout Board Uses Ild213t Opto-Isolator And Discrete Transistors To Calibrate The Logic, With Two Channels. It Is Very Suitable For Use In Noisy Circuits Where Signal Lines Need Electrical Isolation..
Easy To Connect Logic Circuits, Fast Response Speed, High Transmission Efficiency： This Optoisolator Is Configured For Data Rates Up To 9600Bps. Compatible With Dual Wave, Vapor Phase And Ir Reflow Soldering.
Using This Board Can Allow The Microcontroller To Control The Servo System Or Other Motors. These Motors Use A Higher Voltage Than The Ttl Logic On The Micro (3.3V Or 5V), And May Affect Our System When The Motor Is Turned On And Off. Cause Electromagnetic Interference..
This Is Specially Designed For Optical Isolation, Which Helps To Connect Digital Systems To High-Voltage Or Noisy Systems.Good Isolation Performance, Complete Electrical Isolation Between Input And Output..
Features
- The board electrically isolates the controller from the high-power system by using an opto-isolator IC. The opto-isolator breakout IC has built-in two LEDs and two photodiodes, allowing the low-voltage side to control the high-voltage side.
- This is specially designed for optical isolation, which helps to connect digital systems to high-voltage or noisy systems.Good isolation performance, complete electrical isolation between input and output.
- The breakout board uses ILD213T opto-isolator and discrete transistors to calibrate the logic, with two channels. It is very suitable for use in noisy circuits where signal lines need electrical isolation.
- Using this board can allow the microcontroller to control the servo system or other motors. These motors use a higher voltage than the TTL logic on the micro (3.3V or 5V), and may affect our system when the motor is turned on and off. Cause electromagnetic interference.
- Easy to connect logic circuits, fast response speed, high transmission efficiency this optoisolator is configured for data rates up to 9600bps. Compatible with dual wave, vapor phase and IR reflow soldering
- See more on Amazon...
Brand: Treedix | Manufacturer: Treedix
Dimensions: 0.06 x 0.60 x 0.60 inches
See On Amazon #17
NTE Electronics NTE3044 Optoisolator with NPN Darlington Transistor Output, 6 Lead DIP Type Package, 3V
Asin: B0002FRCP4 | Model: NTE3044 | PartNumber: NTE3044 | Ean: 0768249130215 | UPC: 768249130215
No Base Connection For Improved Noise Immunity.
Appliances, Measuring Instruments.
High Collector–Emitter Breakdown Voltage.
Features
- High Sensitivity to Low Input Drive Current
- High Collector Emitter Breakdown Voltage
- No Base Connection for Improved Noise Immunity
- Appliances, Measuring Instruments
- See more on Amazon...
First Available: 03/12/2017
Brand: NTE Electronics | Manufacturer: NTE Electronics, Inc.
Weight: 0.00 pounds
See On Amazon #18
24V Converter Module 80KHz Photoelectric Optoisolator 12V PNP NPN Signal Converter PC817 Optocoupler Optoisolator
Asin: B0CQLYH66Q | Ean: 1022335456702
Package Contents:Pc817 24V 80Khz Optocoupler Optoisolator 1Pieces.
Features
- Part Number:PC817 24V 80KHz Optocoupler Optoisolator
- Package contents:PC817 24V 80KHz Optocoupler Optoisolator 1pieces
- See more on Amazon...
Brand: TYSQXQ | Manufacturer: TYSQXQ
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
See On Amazon #19
NTE Electronics NTE3083 Optoisolator with NPN Darlington Transistor Output, 6 Lead DIP Type Package, 3V, 3 Amp
Asin: B0002FRKGU | Model: NTE3083 | PartNumber: NTE3083 | Ean: 0768249134114 | UPC: 768249134114
6 Lead Dip Type Package.
3 Amps.
3Volt.
High Isolation: 3550Vdc, 1012Ω, 0.5Pf.
Features
- High sensitivity: 1mA on the input will sink a TTL gate
- High isolation: 3550VDC, 1012 , 0.5pF
- 6 lead DIP type package
- 3Volt
- 3 amps
- See more on Amazon...
Brand: LED Group Buy | Manufacturer: NTE Electronics, Inc.
Weight: 0.01 pounds
See On Amazon
Looking For Something Else?
Search