#19 (.1660") HSS Drill Blank (5 Pieces.)
Asin: B00E3ENQMI
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.High Speed Steel.
Overall Length: 3-1/4".
Wire Gage Size: #19.
Brand: Republic USA | Manufacturer: REPUBLIC USA
Weight: 0.00 pounds
See On Amazon Similar To 19 .1660 HSS Drill Blank
#1
BOSCH CO2146 1-Piece 19/64 In. x 4-3/8 In. Cobalt Metal Drill Bit for Drilling Applications in Light-Gauge Metal, High-Carbon Steel, Aluminum and Ally Steel, Cast Iron, Stainless Steel, Titanium
Asin: B000AEQQWM | Model: CO2146 | PartNumber: CO2146 | Ean: 0000346333589 | UPC: 000346333589
Surface Hardened To Penetrate Tough Abrasive Materials.
Best Used For Drilling Into Light-Gauge Metal, High-Carbon Steel, Aluminum And Ally Steel, Cast Iron, Stainless Steel And Titanium.
Available In Jobber Length, Full Shank.
Rigid, Thick Web Design Adds Stability To Bit In Tough Applications.
Features
- Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)
- Rigid, thick web design adds stability to bit in tough applications
- Surface hardened to penetrate tough abrasive materials
- Available in jobber length, full shank
- Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium
- See more on Amazon...
Brand: BOSCH | Manufacturer: Bosch
Dimensions: 0.00 x 0.00 x 0.00 inches
Warranty: No
See On Amazon #2
Drill America - KFDRSD19/32 19/32" Reduced Shank High Speed Steel Black & Gold KFD Drill Bit with 1/2" Shank, KFD Series
Asin: B00AYZ2T28 | Model: KFDRSD19/32 | PartNumber: KFDRSD19/32 | Ean: 0887861037037 | UPC: 887861037037
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Heavy Duty 135 Degree Split Point.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold And Black Surface Treated For Use In Stainless Steel And Other Hard Metal Drilling.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Gold and black surface treated for use in stainless steel and other hard metal drilling
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Heavy duty 135 degree split point
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #3
Owl Tools 19/64" Cobalt Drill Bits - 3 Pack - 4 1/4" Length - M35 Cobalt Drill Bits with Storage Case - Perfect Drill Bits for Metal, Hardened & Stainless Steel, Cast Iron, and More!
Asin: B0CHBVKGXR | Ean: 0850011159989 | UPC: 850011159989
Plastic Storage Case Included - Incredibly Tough And Durable Plastic Case. Perfect For Keeping Your Cobalt Drill Bits Neatly Organized And Safe..
Lifetime Guarantee - Here At Owl Tools (Usa Based Company) We Only Care About Your Satisfaction. We Try Our Best To Ensure Each Product Is In Perfect Condition Before You Get It, But If Something Is Not Up To Your Satisfaction, Please Contact Us For A Full Refund Or Replacement..
Cobalt Drill Bits Are The Perfect Drill Bits For Metal - As Well As Other Hard Materials Such As Stainless Steel, Hardened Steel, Cast Iron, Bronze, Titanium, And More!.
M35, Fully Ground, 135° Split Point - Our Drill Bits Contain 5% Cobalt, Are Fully Grounded For A Precision Drilling Diameter. 135° Split Point Design Makes It Easier To Drill Repeated Holes In Harder Materials..
Features
- 3 PACK OF 19/64" COBALT DRILL BITS - 19/64" Diameter with a Flute Length of 2-3/4" and Total length of 4.25"
- M35, FULLY GROUND, 135 SPLIT POINT - Our Drill Bits Contain 5% Cobalt, Are Fully Grounded for a Precision Drilling Diameter. 135 Split Point Design Makes it Easier to Drill Repeated Holes in Harder Materials.
- PLASTIC STORAGE CASE INCLUDED - Incredibly Tough and Durable Plastic Case. Perfect for Keeping Your Cobalt Drill Bits Neatly Organized and Safe.
- COBALT DRILL BITS ARE THE PERFECT DRILL BITS FOR METAL - As well as other hard materials such as Stainless Steel, Hardened Steel, Cast Iron, Bronze, Titanium, and More!
- LIFETIME GUARANTEE - Here at Owl Tools (USA Based Company) we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
- See more on Amazon...
Brand: Owl Tools | Manufacturer: Owl Tools
See On Amazon #4
STEELEX PLUS D4516 HSS Brad Point Bit, 19/64"
Asin: B017VUQ45Q | Model: D4516 | PartNumber: D4516 | Ean: 0754001012165 | UPC: 754001012165
Produces Clean Cuts.
The Lip And Spur Tip Design Helps To Prevent Tearing Wandering On Flat Surfaces.
Features
- Ideal for general wood drilling and especially for making dowel holes
- The lip and spur tip design helps to prevent tearing wandering on flat surfaces
- Produces clean cuts
- See more on Amazon...
Brand: Steelex | Manufacturer: Woodstock International INC
Dimensions: 1.00 x 9.00 x 2.00 inches | Weight: 0.05 pounds
See On Amazon #5
Hymnorq M35 Cobalt Steel Fractional 19/64 Inch Dia. x 4.37 Inch Long Twist Drill Bit Set of 5pcs, Jobber Length Round Shank, Self-Centering Split Point Heat Resistant for Metalworking
Asin: B07MZVXKKC | Model: HT001 | PartNumber: HT001 | Ean: 0681413691674 | UPC: 681413691674
Self Centering - The 135°Quick-Cut Pilot Split Points Are Self-Centering And Can Penetrate Quickly With Less Pressure. The Bits Will Not "Walk" Or "Wander". Straight Shank Allows For Firmly Holding And Accurate Centering, Fit For Standard Drill Chucks And Regular Round Collet Chucks..
Downloadable User Guide - We've Summed Up Some Tips Of Drilling Metals, Including A Rpm Chart For Several Common Metals, Based On Our Reviews And Some Articles On The Internet. In Most Cases, Our Customers Would Get A Much Better Result With These Tips. Welcome To Download..
5Pc Set - The Set Includes 5Pcs Of 19/64” Diameter M35 Grade Cobalt Steel Twist Drill Bits, Packed In A Plastic Case For Easy Storage And Carrying. Total Lenght: 4.37 Inch; Working Length: 3.07 Inch. Manufactured To German Din338 Standard..
For Metalworking - Particularly Successful In Cutting Through Hard Metals(Hardness Less Than Hrc38°) Such As Stainless Steel And Cast Iron, Although They Can Be Used For Softer Materials Like Copper And Aluminium, Too. Not For Hardened Steel / High Carbon Steel. Try To Adjust The Rpm When It Fails To Penetrate..
Features
- COBALT STEEL - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- FOR METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38 ) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate.
- SELF CENTERING - The 135 quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not walk or wander. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.
- 5PC SET - The set includes 5pcs of 19/64 diameter M35 grade cobalt steel twist drill bits, packed in a plastic case for easy storage and carrying. Total lenght: 4.37 inch; working length: 3.07 inch. Manufactured to German DIN338 standard.
- DOWNLOADABLE USER GUIDE - We've summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers would get a much better result with these tips. Welcome to download.
- See more on Amazon...
Brand: HYMNORQ | Manufacturer: Hymnorq
See On Amazon #6
Drill America DWDCO19P12 #19 Cobalt Drill Bit (Pack of 12), DWDCO Series
Asin: B00FXH98VM | Model: DWDCO19P12 | PartNumber: DWDCO19P12 | Ean: 0887861198615 | UPC: 887861198615
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Drilling In Tough, High Tensile Strength Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for drilling in tough, high tensile strength materials
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #7
MAXTOOL 19/32" Silver and Deming Drill Bits HSS M2 S & D Drill Bits Prentice Twist Drills Black Oxide 1/2" Reduced Shank 6" OAL; SD02B00R038
Asin: B079P6XFZS | Ean: 0634301935466 | UPC: 634301935466
Black Oxide Surface Treatment Holds Up Lubricant Better For Smoother Drilling.
Precision Ground With Geometry Of 118 Degree Chisel For Quick Penetration And An Accurate Start.
6" Oal & 1/2" Str. Shank Fits 1/2" Drill Chuck; Milled & Polished Flutes Ensure Chips Move Smoothly.
Premium Heat Treated Black Oxide Is Durable And Withstand Heavy Duty Operation For A Long Tool Life.
Features
- Quality HSS M2 ensures sharp and fast execution in any material for clean results
- Premium Heat treated black oxide is durable and withstand heavy duty operation for a long tool life
- Black Oxide Surface Treatment holds up lubricant better for smoother drilling
- 6 OAL & 1/2 Str. shank fits 1/2 drill chuck; Milled & polished flutes ensure chips move smoothly
- Precision ground with geometry of 118 degree chisel for quick penetration and an accurate start
- See more on Amazon...
Brand: MaxTool | Manufacturer: JiangsuTianshun
Dimensions: 1.00 x 7.00 x 1.00 inches | Weight: 0.35 pounds
See On Amazon #8
Drill America - DWDRSD19/32 19/32" Reduced Shank High Speed Steel Drill Bit with 1/2" Shank, DWDRSD Series
Asin: B0771SDH37 | Model: DWDRSD19/32 | PartNumber: DWDRSD19/32 | Ean: 0887861033978 | UPC: 887861033978
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Ideal For Drilling In Low And Medium Tensile Strength Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for drilling in low and medium tensile strength materials
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.01 x 5.98 x 5.98 Inches
See On Amazon #9
LEPEVNEY 19mm Reduced Shank Twist Drill Bit with 10mm Shank for Stainless Steel Aluminum Alloy Metal Copper Plastic Wood, Made of High Speed Steel 4341, Ideal for Drilling Steel Plate
Asin: B0C9V8122W
Convenient Design: The Reduced Shank Design Expands The Capacity Of A Portable Drill Chuck And The Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Cutting Edge Diameter : 19Mm; Shank Diameter : 10Mm / 0.39"; Cutting Edge Length: 85Mm / 3.35"; Total Length : 156Mm / 6.14".
Precise Drilling: Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts, Helping You Work More Efficiently And Get Rid Of Glitches Or Scrap..
Wide Range Of Use: Can Be Used In Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials..
Features
- High Durability: Made of tungsten steel material for anti-bending and anti-fracture durability, ensuring long-lasting use. Black & Gold Oxide Finish enhances lubrication and corrosion resistance, improving the overall performance of the drill bits.
- Wide Range of Use: Can be used in stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials.
- Convenient Design: The reduced shank design expands the capacity of a portable drill chuck and the spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Precise Drilling: Sharp and spiral cutting edge provides neat and smooth cuts, helping you work more efficiently and get rid of glitches or scrap.
- Cutting Edge Diameter : 19mm; Shank Diameter : 10mm / 0.39; Cutting Edge Length: 85mm / 3.35; Total Length : 156mm / 6.14
- See more on Amazon...
Brand: LEPEVNEY | Manufacturer: LEPEVNEY
See On Amazon #10
uxcell Reduced Shank Twist Drill Bits 19mm High Speed Steel 4341 with 10mm (3/8") Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D24TT2 | Model: a19102500ux0072 | PartNumber: a19102500ux0072
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes. Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Chucking Maximizing Security For Precise Holes..
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance. High Cutting Edge Strength, Fast Cutting Speed..
Features
- Features: Cutting Edge Diameter : 19mm / 0.75"; Shank Diameter : 10mm / 3/8"; Cutting Edge Length: 57mm / 2.24"; Total Length : 150mm / 6.0"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. High cutting edge strength, fast cutting speed.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Sharp and spiral cutting edge provides neat and smooth cuts.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Tri-flat on the shank of drills are constructed for tighter chucking maximizing security for precise holes.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
VALYRIANTOOL 19/32 in. x 6 in. Fractional Cobalt Silver and Deming Drill Bits HSSCO High Speed Steel M35 S&D Twist Drill Bits for Stainless Steel 1/2" Reduced Shank 6" OAL 135-Degree Split Point
Asin: B0B6FVJSPB | Model: VASILVERDEMING | PartNumber: VASILVERDEMING | Ean: 6941586102921
135-Degree Split Point For Accurate Centering And Fast Penetration And Round Shanks Allow Use With A Wide Variety Of Toolholding Systems..
Ideal For Drilling In Cast Iron, Zinc Alloy, Copper, Stainless Steel And So On..
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging..
Black And Gold Polished Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge..
Features
- M35 HSSCO High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
- Black and gold polished treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
- 135-Degree split point for accurate centering and fast penetration and round shanks allow use with a wide variety of toolholding systems.
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
- Ideal for drilling in cast iron, zinc alloy, copper, stainless steel and so on.
- See more on Amazon...
Brand: VALYRIANTOOL | Manufacturer: VALYRIANTOOL
See On Amazon #12
Irwin Tools 3016019 Single Cobalt Alloy Steel High-Speed Steel Drill Bit, 19/64" x 4-3/8
Asin: B000CCIW7O | Model: 3016019 | PartNumber: 3016019 | Ean: 0024721067081, 0247221067089 | UPC: 247221067089, 024721067081
135-Degree Split-Point Tip Starts Drilling Immediately With Less Force And Eliminates "Walking" Across The Work Surface.
Bit Has A Straight Shank.
Made From Industrial Grade High-Speed Steel For Increased Durability. 8% Cobalt Alloy Steel Is Heat And Abrasion-Resistant.
Features
- Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel
- Made from industrial grade High-Speed Steel for increased durability. 8% Cobalt alloy steel is heat and abrasion-resistant
- 135-degree split-point tip starts drilling immediately with less force and eliminates walking across the work surface
- Bit has a straight shank
- See more on Amazon...
Brand: IRWIN | Manufacturer: IRWIN
Dimensions: 0.60 x 9.00 x 2.25 Inches | Weight: 0.10 pounds
Warranty: Limited lifetime
See On Amazon #13
MAXTOOL No.19 5pcs Identical Jobber Length Drills Dia 0.166" HSS M2 Twist Drill Bits Wire Gauge Gage Numbered Straight Shank Drills; JBN02H10R19P5
Asin: B085GLC9NL | Model: JBN02H10R19P5 | PartNumber: JBN02H10R19P5 | Ean: 0634301940781 | UPC: 634301940781
Fully Ground Process Ensures Excellent Chips Moving, And 135 Deg Chisel Angle With Split Point Provide Accuracy Start For Quick Penetration Without Walking And Less Logging.
Jobber Length Twist Drill Bits With Straight Shank For Cutting Metal, Plastic, And Wood Etc; No. 1 To No. 60 Are Available.
Precision Treatment Makes Drills Durable Toughness, Withstands Heavy Duty Operation, Resists Corrosion And Lubricates The Drill Bits Better For Cutting Smoothly.
All Drill Dimensional & Tolerances Conform To Asme/Ansi B94.11M Drill Standards Or Uscti - United States Cutting Tool Institute (Formerly Mcti).
Features
- Quality high speed steel ensures the bits super hard, sharp and cutting effectively with impressive cutting performance in metal, plastic, and wood etc with long tool life
- All drill dimensional & tolerances conform to ASME/ANSI B94.11M drill standards or USCTI - United States Cutting Tool Institute (formerly MCTI)
- Fully ground process ensures excellent chips moving, and 135 deg chisel angle with split point provide accuracy start for quick penetration without Walking and less Logging
- Precision treatment makes drills durable toughness, withstands heavy duty operation, resists corrosion and lubricates the drill bits better for cutting smoothly
- Jobber Length Twist Drill Bits with Straight Shank for cutting metal, plastic, and wood etc; No. 1 to No. 60 are available
- See more on Amazon...
Brand: MaxTool | Manufacturer: TianShun Tool
Dimensions: 0.17 x 3.29 x 0.17 inches | Weight: 76.00 Grams
See On Amazon #14
VALYRIANTOOL 19/32 in. x 6 in. Fractional Silver and Deming Drill Bits HSS High Speed Steel M2 S&D Drill Bits Twist Drills Black Oxide 1/2" Reduced Shank 6" OAL 118-Degree Split Point
Asin: B0B6FYG5TX | Ean: 6941586102839
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems..
Ideal For Drilling In Low And Medium Tensile Strength Materials..
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging..
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge..
Features
- M2 High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
- Round shanks allow use with a wide variety of toolholding systems.
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
- Ideal for drilling in low and medium tensile strength materials.
- See more on Amazon...
Brand: VALYRIANTOOL | Manufacturer: VALYRIANTOOL
See On Amazon #15
uxcell 19mm Reduced Shank Drill Bit HSS 6542 Black Oxide with 1/2 Inch Straight Shank
Asin: B07MSBQW4J | Model: a18103100ux0186 | PartNumber: a18103100ux0186
Black Oxide Finish - Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Please Note: To Make Clean And Precise Holes, Water Is Required For Lubrication And Cooling When Drilling Metals. Increased Use Of Water Lubrication Will Extend Drill Bit Life.
Wide Application - Design For Drilling In Low And Medium Tensile Strength Materials, Such Aluminum, Iron, Copper, Brass And Metal.
Reduced Shank - Expanding The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Features
- High Speed Steel tool - 19mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
- Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 7.48 x 1.57 inches
See On Amazon #16
Drill America 19/64" x 12" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series
Asin: B00B2QXEY0 | Model: DWDA/CX1219/64 | PartNumber: DWDA/CX1219/64 | Ean: 0887861044493 | UPC: 887861044493
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to national aerospace standard 907
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Weight: 0.04 Pounds
See On Amazon #17
IVY Classic 01519 No. 19 Wire Gauge Drill Bit, M2 High-Speed Steel, 135-Degree Split Point, 1/Card
Asin: B004ZFJZD4 | Model: 01519 | PartNumber: 01519 | Ean: 0738226015194 | UPC: 738226015194
Precision Ground, Bright Finish With Polished Flutes That Increase Chip Ejection.
Wire Gauge Diameter: No. 19, Decimal Inches Equivalent: 0.1660, Overall Length: 3-1/4-Inch.
135-Degree Split Point For Fast Penetration And Accurate Starting With No Center Punch.
Hardened And Tempered M2 High-Speed Steel Bits Fall Between Standard Fractional Drill Sizes.
Features
- Jobber length bits designed for drilling stainless and hard steel, plastic and wood, Premium Swift Bore (Registered Trademark)
- Hardened and tempered M2 high-speed steel bits fall between standard fractional drill sizes
- Precision ground, bright finish with polished flutes that increase chip ejection
- 135-degree split point for fast penetration and accurate starting with no center punch
- Wire Gauge Diameter: No. 19, Decimal Inches Equivalent: 0.1660, Overall Length: 3-1/4-inch
- See more on Amazon...
Brand: IVY Classic | Manufacturer: IVY Classic
Dimensions: 0.20 x 3.30 x 0.20 inches | Weight: 0.03 pounds
See On Amazon #18
DRILLFORCE HSS Jobber Length 10 PCS,19/64" x 4-3/8"Titanium Coated Twist Drill Bits, Metal Drill, Ideal for Drilling on mild Steel, Copper, Aluminum, Zinc Alloy etc. Pack in Plastic Bag (19/64)
Asin: B01LYMOJFW | Model: DF20016 | PartNumber: DF20016 | Ean: 6971141010163
Package & Size: 10 Pieces In A Plastic Bag, Diameter 19/64 Inch, Total Length 4-3/8 Inch, Working Length 3-1/16 Inch..
135 Tip & Twist Design: Increases Cutting Speed With Self-Centering And Prevents Walking, Clears Chips And Particles Faster..
Professional & Diy Use: For Use On Metal, Wood & Plastics, Not For Use On Concrete / Masonry / Stainless Steel. Perfect Match For Workshop Or Service Vehicles..
Strength & Hardness: Made With Hss 4241 Steel, Rock Wall Hardness Level Hrc 60-62..
Features
- Titanium Coated: Classic 4241 High Speed Steel construction with Titanium Coating for proven capability and durability.
- Strength & Hardness: Made with HSS 4241 steel, Rock wall Hardness Level HRC 60-62.
- Package & Size: 10 Pieces in a plastic bag, Diameter 19/64 inch, Total length 4-3/8 inch, Working length 3-1/16 inch.
- Professional & DIY Use: For use on metal, wood & plastics, Not For Use On Concrete / Masonry / Stainless Steel. Perfect match for workshop or service vehicles.
- 135 Tip & Twist Design: Increases cutting speed with self-centering and prevents walking, clears chips and particles faster.
- See more on Amazon...
Brand: DRILLFORCE | Manufacturer: DRILLFORCE
Dimensions: 3.74 x 5.86 x 0.28 Inches | Weight: 0.53 pounds
See On Amazon #19
LEPEVNEY 19mm Reduced Shank Twist Drill Bit with 1/2 Inch Shank for Stainless Steel Aluminum Alloy Metal Copper Plastic Wood, Made of High Speed Steel 4341, Ideal for Drilling Steel Plate
Asin: B0C4GZ6SD7
Convenient Design: The Reduced Shank Design Expands The Capacity Of A Portable Drill Chuck And The Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Cutting Edge Diameter : 19Mm; Shank Diameter : 12.7Mm / 1/2"; Cutting Edge Length: 76Mm / 2.99"; Total Length : 152Mm / 5.98".
Precise Drilling: Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts, Helping You Work More Efficiently And Get Rid Of Glitches Or Scrap..
Wide Range Of Use: Can Be Used In Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials..
Features
- High Durability: Made of tungsten steel material for anti-bending and anti-fracture durability, ensuring long-lasting use. Black & Gold Oxide Finish enhances lubrication and corrosion resistance, improving the overall performance of the drill bits.
- Wide Range of Use: Can be used in stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials.
- Convenient Design: The reduced shank design expands the capacity of a portable drill chuck and the spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Precise Drilling: Sharp and spiral cutting edge provides neat and smooth cuts, helping you work more efficiently and get rid of glitches or scrap.
- Cutting Edge Diameter : 19mm; Shank Diameter : 12.7mm / 1/2; Cutting Edge Length: 76mm / 2.99; Total Length : 152mm / 5.98
- See more on Amazon...
Brand: LEPEVNEY | Manufacturer: LEPEVNEY
See On Amazon #20
TA-VIGOR 19mm Reduced Shank Twist Drill Bit with 10mm Shank- 3/4" Drill Bit Perfect for Drilling Steel, Copper, Aluminum Alloy-Made of High Speed Steel 4341
Asin: B0BD3S248G | Model: TK3352M | PartNumber: TK3352M
【Sharper & Quicker】The Sharp Cutting Edge And Spiral Flutes Promote Faster As Well As Preciser Drilling. Helping You Work More Efficiently And Get Rid Of Glitches Or Scrap..
【Package Content】1 Pack X 19Mm Reduced Shank High Speed Steel Drill Bit.
【Wide Applications】The Ta-Vigor Twist Drill Bit Has Various Sizes And Can Meet Your Needs For Drilling Glass, Stainless Steel, Metal And Wood Materials, Etc.. They Can Be Clamped To Manual And Electric Drilling Tools, Widely Used In Household Or Processing Industries..
【Hard & Durable】 Made Of Tungsten Steel Material, The 3/4" Drill Bit Is Hard Enough, Anti-Bending And Will Not Fracture Easily. The Surface Coating Can Better Protect The Drill Bit Sets From Corrosion And Espand Their Longlife..
Features
- Size Cutting Edge Diameter : 19mm / 3/4"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 57mm / 2.24"; Total Length : 150mm / 6"
- Hard & Durable Made of tungsten steel material, the 3/4 drill bit is hard enough, anti-bending and will not fracture easily. The surface coating can better protect the drill bit sets from corrosion and espand their longlife.
- Sharper & Quicker The sharp cutting edge and spiral flutes promote faster as well as preciser drilling. Helping you work more efficiently and get rid of glitches or scrap.
- Wide Applications The TA-VIGOR twist drill bit has various sizes and can meet your needs for drilling glass, stainless steel, metal and wood materials, etc.. They can be clamped to manual and electric drilling tools, widely used in household or processing industries.
- Package Content 1 Pack x 19mm reduced shank high speed steel drill bit
- See more on Amazon...
Brand: TA-VIGOR | Manufacturer: TA-VIGOR
See On Amazon
Looking For Something Else?
Search