Bassett MCH-2D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 90 Degrees Profile Angle, Chamfer End, 0.36" Cutting Length, 1/4" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E49C4K2 | Model: B10028 | PartNumber: B10028 | Ean: 0662355328910 | UPC: 662355328910
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Threading
Dimensions: 0.39 x 3.23 x 0.39 Inches | Weight: 0.00 pounds
See On Amazon Similar To Bassett MCH2D Series Solid Carbide
#1
Bassett HPAM-3 Series Solid Carbide High-Performance End Mill, Uncoated (Bright) Finish, 3 Flute, 35 Degrees Helix, Square End, 0.5" Cutting Length, 3/8" Cutting Diameter, 2" Length (Pack of 1)
Asin: B00E487WE6 | Model: B04021 | PartNumber: B04021 | Ean: 0662355324714 | UPC: 662355324714
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Tool Design Eliminates Excess Pressure That Causes Chip Packing.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Tool design eliminates excess pressure that causes chip packing
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
Weight: 0.00 pounds
See On Amazon #2
Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 60 Degrees Profile Angle, Chamfer End, 0.45" Cutting Length, 1/4" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E49BOW6 | Model: B10017 | PartNumber: B10017 | Ean: 0662355328699 | UPC: 662355328699
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon #3
Bassett - B10026 MCH-2D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 90 Degrees Profile Angle, Chamfer End, 0.15" Cutting Length, 1/8" Cutting Diameter, 1-1/2" Length (Pack of 1)
Asin: B00E49C2C2 | Model: B10026 | PartNumber: B10026 | Ean: 0662355328873 | UPC: 662355328873
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material..
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material.
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
Dimensions: 0.39 x 3.31 x 0.39 Inches | Weight: 0.01 pounds
See On Amazon #4
Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.425" Cutting Length, 3/8" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E49CN30 | Model: B10224 | PartNumber: B10224 | Ean: 0662355329139 | UPC: 662355329139
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries
Dimensions: 12.00 x 2.00 x 12.00 Inches | Weight: 1.00 pounds
See On Amazon #5
Bassett SA-43 Cylindrical Solid Carbide Bur, Uncoated (Bright) Finish, Double Cut, Plain End, 1/8" Shank, 1/8" Head Diameter, 9/16" Head Length
Asin: B007V5WYN8 | Model: B54810 | PartNumber: B54810 | Ean: 0662355343678 | UPC: 662355343678
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Hi-Temp Alloys Materials And Stainless Steel.
Made In The Usa.
Double-Cut Style Has Rows Of Cutting Teeth Cut In Two Intersecting Directions For Fast Material Removal And A Rougher Finish.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Double-cut style has rows of cutting teeth cut in two intersecting directions for fast material removal and a rougher finish
- Applicable for steel, cast iron, hi-temp alloys materials and stainless steel
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries
See On Amazon #6
Bassett-B10225 MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 60 Degrees Profile Angle, Chamfer End, 0.84" Cutting Length, 1/2" Cutting Diameter, 3" Length (Pack of 1)
Asin: B00E49COCU | Model: B10225 | PartNumber: B10225 | Ean: 0662355329153 | UPC: 662355329153
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Threading
Dimensions: 0.55 x 3.35 x 0.55 Inches | Weight: 0.28 pounds
See On Amazon #7
Bassett MCH-4D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.425" Cutting Length, 3/8" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E49CU5Q | Model: B10229 | PartNumber: B10229 | Ean: 0662355329238 | UPC: 662355329238
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Threading
Dimensions: 0.39 x 3.23 x 0.39 Inches | Weight: 0.00 pounds
See On Amazon #8
Bassett B10230 MCH-4D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.58" Cutting Length, 1/2" Cutting Diameter, 3" Length (Pack of 1)
Asin: B00E49CVCS | Model: B10230 | PartNumber: B10230 | Ean: 0662355329252 | UPC: 662355329252
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries
Dimensions: 0.70 x 0.60 x 3.30 Inches | Weight: 0.02 pounds
See On Amazon #9
Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 82 Degrees Profile Angle, Chamfer End, 0.36" Cutting Length, 1/4" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E49BQY2 | Model: B10018 | PartNumber: B10018 | Ean: 0662355328712 | UPC: 662355328712
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Threading
Dimensions: 0.39 x 3.23 x 0.39 Inches
See On Amazon #10
Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.75" Cutting Length, 3/4" Cutting Diameter, 4" Length (Pack of 1)
Asin: B00E49D370 | Model: B10236 | PartNumber: B10236 | Ean: 0662355329375 | UPC: 662355329375
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon #11
Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 60 Degrees Profile Angle, Chamfer End, 0.375" Cutting Length, 1/4" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E49CGIM | Model: B10219 | PartNumber: B10219 | Ean: 0662355329030 | UPC: 662355329030
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
Dimensions: 0.39 x 3.23 x 0.39 Inches | Weight: 0.06 pounds
See On Amazon #12
Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 90 Degrees Profile Angle, Chamfer End, 0.15" Cutting Length, 1/8" Cutting Diameter, 1-1/2" Length (Pack of 1)
Asin: B00E49BJLC | Model: B10014 | PartNumber: B10014 | Ean: 0662355328651 | UPC: 662355328651
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon #13
Bassett HPEM-3 Carbide High-Performance End Mill,Uncoated Finish, 30 Degree Helix, .01" Radius Corner End, .31" Cut Length, .16" Cut Dia., 1.5" Length
Asin: B00E48OHNK | Model: B05107 | PartNumber: B05107 | Ean: 0662355325889 | UPC: 662355325889
Weldon Shanks Feature A Round Shank With One Of More Flats Machined Into The Side For Easy Indexing And Alignment.
Ideally Suited For Use In Stainless Steel And Exotics Such As Hastalloy, Waspalloy, And Inconel.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideally suited for use in stainless steel and exotics such as hastalloy, waspalloy, and inconel
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon #14
BASSETT Carbide Double Square End Mill 7/16" 4FL 52860
Asin: B0771YBMBY | Model: 52860 | PartNumber: 52860
Shank: 7/16".
Length Of Cut: 5/8".
Overall Length: 3".
Finish: Bright.
Brand: Bassett | Manufacturer: Bassett
See On Amazon #15
Bassett SC-41 Cylindrical Solid Carbide Bur, Uncoated (Bright) Finish, Single Cut, Radius End, 1/8" Shank, 3/32" Head Diameter, 7/16" Head Length
Asin: B007V5YR74 | Model: B55620 | PartNumber: B55620 | Ean: 0662355345283 | UPC: 662355345283
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Non-Ferrous Materials And Stainless Steel.
Made In The Usa.
Standard (Right-Hand Spiral) Cut Is A General-Purpose Flute Pattern Which Is Designed For Use In Cast Iron, Steel, And Other Ferrous Metals.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Standard (right-hand spiral) cut is a general-purpose flute pattern which is designed for use in cast iron, steel, and other ferrous metals
- Applicable for steel, cast iron, non-ferrous materials and stainless steel
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries
Weight: 0.00 pounds
See On Amazon #16
Bassett SD-1 Ball Solid Carbide Bur, Uncoated (Bright) Finish, Double Cut, Plain End, 1/4" Shank, 1/4" Head Diameter, 1/4" Head Length
Asin: B007V5XG9O | Model: B54919 | PartNumber: B54919 | Ean: 0662355344040 | UPC: 662355344040
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Hi-Temp Alloys And Stainless Steel.
Made In The Usa.
Double-Cut Style Has Rows Of Cutting Teeth Cut In Two Intersecting Directions For Fast Material Removal And A Rougher Finish.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Double-cut style has rows of cutting teeth cut in two intersecting directions for fast material removal and a rougher finish
- Applicable for steel, cast iron, hi-temp alloys and stainless steel
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries
See On Amazon #17
Bassett SD-9 Ball Solid Carbide Bur, Uncoated (Bright) Finish, Single Cut, Plain End, 1/4" Shank, 1" Head Diameter, 1" Head Length
Asin: B007V5XFBI | Model: B54915 | PartNumber: B54915 | Ean: 0662355344026 | UPC: 662355344026
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Non-Ferrous Materials And Stainless Steel.
Made In The Usa.
Standard (Right-Hand Spiral) Cut Is A General-Purpose Flute Pattern Which Is Designed For Use In Cast Iron, Steel, And Other Ferrous Metals.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Standard (right-hand spiral) cut is a general-purpose flute pattern which is designed for use in cast iron, steel, and other ferrous metals
- Applicable for steel, cast iron, non-ferrous materials and stainless steel
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries
Dimensions: 1.38 x 6.10 x 1.38 Inches
See On Amazon #18
Bassett MEG-2 Series Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 2 Flute, 30 Degrees Helix, Ball End, 0.04" Cutting Length, 0.025" Cutting Diameter, 1-1/2" Length (Pack of 1)
Asin: B00E49D6SQ | Model: B10903 | PartNumber: B10903 | Ean: 0662355329535 | UPC: 662355329535
These Round Shank Tools Have Flats Ground Onto Three Sides To Reduce Slippage Of The Bit When Used In Drill Chucks.
2-Flute End Mills Are Generally Used For Plunging, Slotting, And Heavy Peripheral Cuts.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- These round shank tools have flats ground onto three sides to reduce slippage of the bit when used in drill chucks
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 2-flute end mills are generally used for plunging, slotting, and heavy peripheral cuts
- Made in the USA
- See more on Amazon...
First Available: 12/12/2017
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon #19
Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 82 Degrees Profile Angle, Chamfer End, 0.425" Cutting Length, 3/8" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E49CLC8 | Model: B10223 | PartNumber: B10223 | Ean: 0662355329115 | UPC: 662355329115
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
Weight: 0.00 pounds
See On Amazon
Looking For Something Else?
Search