Bassett MSE-3 Series Solid Carbide General Purpose End Mill, TiCN Coated, 3 Flute, 30 Degrees Helix, Radius Corner End, 0.375" Cutting Length, 3/32" Cutting Diameter, 1-1/2" Length (Pack of 1)
Asin: B00E49FU0S | Model: B37106 | PartNumber: B37106 | Ean: 0662355331439 | UPC: 662355331439
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
3-Flute End Mills Provide A Compromise Between The Chip Clearance Of A 2-Flute Tool And The Rigidity And Wear Resistance Of A 4-Flute Tool; Especially Useful For Many Slotting Operations.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Carbonitride Coatings Are Harder And More Wear-Resistant Than Tin For Improved Tool Life And Faster Cutting Speeds.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 3-flute end mills provide a compromise between the chip clearance of a 2-flute tool and the rigidity and wear resistance of a 4-flute tool; especially useful for many slotting operations
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
Weight: 0.00 pounds
See On Amazon Similar To Bassett MSE3 Series Solid Carbide
#1
Bassett HPAM-3 Series Solid Carbide High-Performance End Mill, Uncoated (Bright) Finish, 3 Flute, 35 Degrees Helix, Square End, 0.5" Cutting Length, 3/8" Cutting Diameter, 2" Length (Pack of 1)
Asin: B00E487WE6 | Model: B04021 | PartNumber: B04021 | Ean: 0662355324714 | UPC: 662355324714
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Tool Design Eliminates Excess Pressure That Causes Chip Packing.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Tool design eliminates excess pressure that causes chip packing
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
Weight: 0.00 Pounds
See On Amazon #2
Bassett DM Series Solid Carbide Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 118 Degrees Four-Facet Point, 31 Size, 1-7/8" Length (Pack of 1)
Asin: B00E4BO3FE | Model: B54171 | PartNumber: B54171 | Ean: 0662355342305 | UPC: 662355342305
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Non-Ferrous Material, Cast Iron And Steel.
Made In The Usa.
Straight Flute Drill Bits Are Well Suited For Drilling In Hard Materials And Are Also Well-Suite To Drilling In Lathe Applications.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications
- Applicable for non-ferrous material, cast iron and steel
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon #3
Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.425" Cutting Length, 3/8" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E49CN30 | Model: B10224 | PartNumber: B10224 | Ean: 0662355329139 | UPC: 662355329139
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries
Dimensions: 12.00 x 2.00 x 12.00 inches | Weight: 1.00 pounds
See On Amazon #4
Bassett MSE-4 Solid Carbide General Purpose End Mill, Uncoated Finish, 30 Degree Helix, Radius Corner End, .31" Cut Length, 3/16" Cut Dia., 2" Length
Asin: B00E49WIDK | Model: B52652 | PartNumber: B52652 | Ean: 0662355339527 | UPC: 662355339527
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
4-Flute End Mills Are Most Commonly Used In Profiling And In Harder Materials; Stiffer Construction Results In Minimal Deflection.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 4-flute end mills are most commonly used in profiling and in harder materials; stiffer construction results in minimal deflection
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
Weight: 0.00 pounds
See On Amazon #5
Bassett SA-43 Cylindrical Solid Carbide Bur, Uncoated (Bright) Finish, Double Cut, Plain End, 1/8" Shank, 1/8" Head Diameter, 9/16" Head Length
Asin: B007V5WYN8 | Model: B54810 | PartNumber: B54810 | Ean: 0662355343678 | UPC: 662355343678
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Hi-Temp Alloys Materials And Stainless Steel.
Made In The Usa.
Double-Cut Style Has Rows Of Cutting Teeth Cut In Two Intersecting Directions For Fast Material Removal And A Rougher Finish.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Double-cut style has rows of cutting teeth cut in two intersecting directions for fast material removal and a rougher finish
- Applicable for steel, cast iron, hi-temp alloys materials and stainless steel
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries
See On Amazon #6
Bassett-B10225 MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 60 Degrees Profile Angle, Chamfer End, 0.84" Cutting Length, 1/2" Cutting Diameter, 3" Length (Pack of 1)
Asin: B00E49COCU | Model: B10225 | PartNumber: B10225 | Ean: 0662355329153 | UPC: 662355329153
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Threading
Dimensions: 0.55 x 3.35 x 0.55 inches | Weight: 0.28 pounds
See On Amazon #7
Bassett MCH-4D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.425" Cutting Length, 3/8" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E49CU5Q | Model: B10229 | PartNumber: B10229 | Ean: 0662355329238 | UPC: 662355329238
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Threading
Dimensions: 0.39 x 3.23 x 0.39 inches | Weight: 0.00 pounds
See On Amazon #8
Bassett MSE-2B Series Solid Carbide General Purpose End Mill, TiCN Coated, 2 Flute, 30 Degrees Helix, Ball End, 0.563" Cutting Length, 5/32" Cutting Diameter, 2" Length (Pack of 1)
Asin: B00E46IM4M | Model: B01515 | PartNumber: B01515 | Ean: 0662355321591 | UPC: 662355321591
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
2-Flute End Mills Are Generally Used For Plunging, Slotting, And Heavy Peripheral Cuts.Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Carbonitride Coatings Are Harder And More Wear-Resistant Than Tin For Improved Tool Life And Faster Cutting Speeds.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 2-flute end mills are generally used for plunging, slotting, and heavy peripheral cuts.Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon #9
Bassett B10230 MCH-4D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.58" Cutting Length, 1/2" Cutting Diameter, 3" Length (Pack of 1)
Asin: B00E49CVCS | Model: B10230 | PartNumber: B10230 | Ean: 0662355329252 | UPC: 662355329252
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries
Dimensions: 0.70 x 0.60 x 3.30 inches | Weight: 0.02 pounds
See On Amazon #10
Bassett MSE-V2-5R Series Solid Carbide High-Performance End Mill, TiAlN Coated, 5 Flute, Radius Corner End, 1" Cutting Length, 1/2" Cutting Diameter, 3" Length (Pack of 1)
Asin: B00E4A1ZYC | Model: B60454 | PartNumber: B60454 | Ean: 0662355354193 | UPC: 662355354193
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Use One Tool For Roughing And Finishing Operations.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Aluminum Nitride Coatings Become Self-Lubricating When Used At Very High Speeds, Making Them Ideal For Cutting Without Coolant ("Dry Machining").
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (dry machining)
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Use one tool for roughing and finishing operations
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon
Looking For Something Else?
Search