Megaware Keelguard SkegGuard with Drain Hole - Protects Against Ramp Dragging - Skeg Protector - Fits Honda BF115 2011-Present & BF135-150-200-225hp 2004-Present, BF140 2022-2023
Asin: B00EVIK2W8 | Model: 27271 | PartNumber: 27271 | Ean: 0672057272718 | UPC: 672057272718
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard Skeg Protector 27271 For Honda: 115Hp 4 Stroke 2011-Present, 135-150-200-225Hp 4 Stroke 2004-Present, 140Hp 2022-2023. Additional Models Are Available For Inboard And Outboard Motors Such As Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, Omc, Suzuki, Volvo, And Yamaha.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.
Features
- Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
- Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
- Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
- Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
- Designed for Specific Motors SkegGuard Skeg Protector 27271 for Honda: 115hp 4 Stroke 2011-Present, 135-150-200-225hp 4 Stroke 2004-Present, 140hp 2022-2023. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha
- See more on Amazon...
Brand: MEGAWARE KEELGUARD | Manufacturer: MEGAWARE KEELGUARD INC.
Dimensions: 1.00 x 9.00 x 20.00 inches
Warranty: Warranty
See On Amazon Similar To Megaware Keelguard SkegGuard with Drain
#1
27031 Stainless Steel Skeg Guard Fix Damaged Skeg Fits for Mercury Mercruiser Alpha I Generation II 1991-Present
Asin: B0BXNVS1MY | Model: 27031 Skeg Guard | PartNumber: 27031 Skeg Guard
Perfect Design – Design For Your Skeg, Drain Hole Prevents Against Corrosion/Freezing For Longer Wear. No Discernable Drag, Won't Compromise Performance, Avoid Expensive Repair Costs..
Satisfaction Guarantee - Besttruck Values Customers Shopping Experience And Provides Customers With A Good Shopping Environment. If You Are Not Satisfied With The Product, You Can Choose To Return It, We Support A 30-Day Full Refund And A One-Year Warranty..
Superior Material – Made Of 18-Gauge Marine-Grade 316 Stainless Steel. Mirror Polished To Improve The Gloss Of The Surface, Prevent Rust And Corrosion, Durable And Long Service Life. Meeting Or Exceeding Oem Specification..
Function – Protects Your Skeg From Corrosion And Wear In The Harsh Marine Environment. Thickened 3Mm Lower Wear Tab Reduces Ramp Dragging And Is Ideal For River Running. It Will Be Stronger And Much More Affordable Than Welding And Replacing A Lower Skeg..
Features
- Wide Application - Fits for Mercury Mercruiser Alpha I Generation II 1991-Present. Replace for part 27031.
- Function Protects your skeg from corrosion and wear in the harsh marine environment. Thickened 3mm lower wear tab reduces ramp dragging and is ideal for river running. It will be stronger and much more affordable than welding and replacing a lower skeg.
- Perfect Design Design for your skeg, drain hole prevents against corrosion/freezing for longer wear. No discernable drag, won't compromise Performance, avoid expensive repair costs.
- Superior Material Made of 18-Gauge Marine-Grade 316 Stainless Steel. Mirror polished to improve the gloss of the surface, prevent rust and corrosion, durable and long service life. Meeting or exceeding OEM specification.
- Satisfaction Guarantee - Besttruck values customers shopping experience and provides customers with a good shopping environment. If you are not satisfied with the product, you can choose to return it, we support a 30-day full refund and a one-year warranty.
- See more on Amazon...
Brand: besttruck | Manufacturer: besttruck
Dimensions: 1.30 x 12.70 x 7.09 inches
Warranty: 1 year warranty
See On Amazon #2
27031 Skeg Guard Skeg Protector Kit Marine-Grade Stainless Steel Replacement for Mercury Mercruiser Alpha I Generation II 1991-2023
Asin: B0BXSFMW84 | Model: Y-M-27031 | PartNumber: Y-M-27031
Professional Design -- The Skeg Protector Kit Features A 3Mm Thickened Lower Wear Tab, Preventing Dragging On Ramps And Ensuring Optimal Performance During River Riding. Additionally, It Includes A Drain Hole At The Bottom To Prevent Corrosion And Freezing..
Easy Installation -- Secures With Self-Locking Hardware And Installs In As Little As 10 Minutes. It Can Be Installed With As Little As 2-3 Inches Of Skeg Remaining, Suitable For Repairing A Broken Skeg. The Package Includes Male And Female Locking Screws, As Well As An Allen Wrench For Convenient Installation..
Satisfaction Guarantee -- Yoursme Aims To Provide Excellent Products And Best Service For Customers. You Can Simply Return It If You Are Not Satisfied With The Product. We Support 30 Days Full Refund For Return And 12 Month Warranty..
Durable Material -- Constructed From Mirror-Polished 18-Gauge Marine-Grade 316 Stainless Steel, The Skeg Guard Is Built To Withstand The Elements And Provide Long-Lasting Protection..
Ultimate Skeg Protection -- Designed To Be Installed Over The Engine's Original Skeg. It Provides Ultimate Protection For Your Skeg, Whether You Want To Safeguard A New Skeg From Damage Or Repair An Impact-Damaged Or Chipped Skeg For Improved Performance..
Features
- Widely Fitment -- Directly replace OEM Part number 27031, Fit for Mercury Mercruiser Alpha I Generation II 1991-2023, providing reliable protection for the skeg against the harsh ocean environment.
- Ultimate Skeg Protection -- Designed to be installed over the engine's original skeg. It provides ultimate protection for your skeg, whether you want to safeguard a new skeg from damage or repair an impact-damaged or chipped skeg for improved performance.
- Professional Design -- The Skeg Protector Kit features a 3mm thickened lower wear tab, preventing dragging on ramps and ensuring optimal performance during river riding. Additionally, it includes a drain hole at the bottom to prevent corrosion and freezing.
- Durable Material -- Constructed from mirror-polished 18-gauge marine-grade 316 stainless steel, the Skeg Guard is built to withstand the elements and provide long-lasting protection.
- Easy Installation -- Secures with self-locking hardware and installs in as little as 10 minutes. It can be installed with as little as 2-3 inches of skeg remaining, suitable for repairing a broken skeg. The package includes male and female locking screws, as well as an allen wrench for convenient installation.
- Satisfaction Guarantee -- Yoursme aims to provide excellent products and best service for customers. You can simply return it if you are not satisfied with the product. We support 30 days full refund for return and 12 month warranty.
- See more on Amazon...
Brand: Yoursme | Manufacturer: Yoursme
Warranty: 1 Year Seller Warranty
See On Amazon #3
27051 Stainless Steel Skeg Guard Fix Damaged Skeg Fits for Mercury Mercruiser Bravo I & III 1990-Present, Not Compatible with XR/Sport Models
Asin: B0CQ71ZMTS | Model: 27051 Skeg Guard | PartNumber: 27051 Skeg Guard
Perfect Design – Design For Your Skeg, Drain Hole Prevents Against Corrosion/Freezing For Longer Wear. No Discernable Drag, Won't Compromise Performance, Avoid Expensive Repair Costs..
Satisfaction Guarantee - Besttruck Values Customers Shopping Experience And Provides Customers With A Good Shopping Environment. If You Are Not Satisfied With The Product, You Can Choose To Return It, We Support A 30-Day Full Refund And A One-Year Warranty..
Superior Material – Made Of 18-Gauge Marine-Grade 316 Stainless Steel. Mirror Polished To Improve The Gloss Of The Surface, Prevent Rust And Corrosion, Durable And Long Service Life. Meeting Or Exceeding Oem Specification..
Function – Protects Your Skeg From Corrosion And Wear In The Harsh Marine Environment. Thickened 3Mm Lower Wear Tab Reduces Ramp Dragging And Is Ideal For River Running. It Will Be Stronger And Much More Affordable Than Welding And Replacing A Lower Skeg..
Features
- Application Fit for Mercury Mercruiser Bravo I & III 1990-Present. Not Compatible with XR or Sport Models. Replace for part 27051.
- Function Protects your skeg from corrosion and wear in the harsh marine environment. Thickened 3mm lower wear tab reduces ramp dragging and is ideal for river running. It will be stronger and much more affordable than welding and replacing a lower skeg.
- Perfect Design Design for your skeg, drain hole prevents against corrosion/freezing for longer wear. No discernable drag, won't compromise Performance, avoid expensive repair costs.
- Superior Material Made of 18-Gauge Marine-Grade 316 Stainless Steel. Mirror polished to improve the gloss of the surface, prevent rust and corrosion, durable and long service life. Meeting or exceeding OEM specification.
- Satisfaction Guarantee - Besttruck values customers shopping experience and provides customers with a good shopping environment. If you are not satisfied with the product, you can choose to return it, we support a 30-day full refund and a one-year warranty.
- See more on Amazon...
Brand: besttruck | Manufacturer: besttruck
Dimensions: 1.10 x 17.60 x 7.90 inches
Warranty: 1 year warranty
See On Amazon #4
35-SS625 Skeg Guard Safe-Skeg Protector Tool Kit Marine-Grade Stainless Steel Replacement for Yamaha Honda Mercury/Mariner Force Nissan Tohatsu Outboard Engines
Asin: B0C1YJ9N9N | Model: YK230410 | PartNumber: YK230410
【Easy Installation】Secures With Self-Locking Hardware And Installs In As Little As 10 Minutes. It Can Be Installed With As Little As 2-3 Inches Of Skeg Remaining, Suitable For Repairing A Broken Skeg. Package Comes With Male & Female Locking Screws, Allen Wrench, And Loctite 262..
【Ultimate Skeg Protection】The Safe-Skeg Is A Marine-Grade Stainless Steel Protector That Installs Over The Engine's Original Skeg. Use To Protect Your New Skeg From Damage, Or To Repair An Impact-Damaged Or Chipped Skeg For Better Performance..
【Satisfaction Guarantee】Bonbo Committed To Providing Customers With A Good Product Experience, If You Are Not Satisfied With Our Products, Simply Return It For A Full Refund In 30 Days. We Support 12 Months’ Warranty..
【Premium Material】Constructed From Mirror-Polished 18-Gauge Marine-Grade 316 Stainless Steel, 1/16" Thick Material, Seamlessly Engineered For Strength And Durability, The Skeg Guard Is Built To Withstand The Elements And Provide Long-Lasting Protection..
【Protect Your Skeg From Harsh Ocean Environment】Skeg Protector Kit Prevents Dragging On Ramps And Is Perfect For River Riding Without Compromising Performance. Additionally, It Has A Drain Hole To Prevent Corrosion Or Freezing..
Features
- Wide Application The Safe-Skeg fits the following outboard engines: for Force 70-90 HP(Mercury) 2-Stroke 1998-2002, for Honda 75-90-115 HP 4-Stroke 1995-2007, for Mercury/Mariner 50-60 HP (Big Foot) 2 & 4-Stroke 2003+, for Mercury/Mariner 70-75-80 HP 2-Stroke 1984+, for Mercury/Mariner 70-90-100-115-125 HP Optimax 2-Stroke 1983+, for Nissan/Tohatsu 70-90-115-120-140 HP 2-Stroke 1993+, for Yamaha 60-70-80-90-100 HP 2 & 4 Stroke 1998-2001.
- Protect Your Skeg From Harsh Ocean Environment Skeg Protector Kit prevents dragging on ramps and is perfect for river riding without compromising performance. Additionally, it has a drain hole to prevent corrosion or freezing.
- Easy Installation Secures with self-locking hardware and installs in as little as 10 minutes. It can be installed with as little as 2-3 inches of skeg remaining, suitable for repairing a broken skeg. Package comes with male & female locking screws, allen wrench, and Loctite 262.
- Premium Material Constructed from mirror-polished 18-gauge marine-grade 316 stainless steel, 1/16 thick material, seamlessly engineered for strength and durability, the Skeg Guard is built to withstand the elements and provide long-lasting protection.
- Ultimate Skeg Protection The Safe-Skeg is a marine-grade stainless steel protector that installs over the engine's original skeg. Use to protect your new skeg from damage, or to repair an impact-damaged or chipped skeg for better performance.
- Satisfaction Guarantee Bonbo committed to providing customers with a good product experience, if you are not satisfied with our products, simply return it for a full refund in 30 days. We support 12 months Warranty.
- See more on Amazon...
Brand: Bonbo | Manufacturer: Bonbo
Dimensions: 0.30 x 11.00 x 5.10 inches
See On Amazon #5
MEGAWARE KEELGUARD SkegGuard with Drain Hole - Protects Against Ramp Dragging and Everyday Wear and Tear - Skeg Protector - Easy to Install - Fits Mercury MerCruiser Alpha 1 Generation 2 1991-Present
Asin: B005BI65UA | Model: 27031 | PartNumber: 27031 | Ean: 0672057270318 | UPC: 672057270318
Superior Engineering - Our Skeg Protector Is Made From Heavy-Duty 18 Gauge Marine Grade 316 Stainless Steel With A Mirror-Polished Finish And Easily Conforms To Your Skeg; It Also Features A Drain Hole On The Bottom To Prevent Water From Collecting And Causing Corrosion Or Freezing.
Designed For Specific Motors – Skegguard 27031 For Mercury Mercruiser: Alpha 1 Generation 2 1991-Present. Additional Models Are Available For Inboard And Outboard Motors Such As Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, Omc, Suzuki, Volvo, And Yamaha.
Installation - You Can Attach/Install The Skegguard With As Little As 2 To 3 Inches Of The Original Skeg Remaining; Comes With A 3-Year Warranty.
Easy To Install - The Skeg Protector Features A 3Mm Lower Wear Tab And Is Easy To Install In Just 4 Simple Steps In Under 10 Minutes; Using A Rubber Mallet, Slide The Skegguard Onto The Existing Skeg And Gently Tap On It Until Fully Seated; Use The Pre-Drilled Holes To Drill Skeg Using A 1/4-Inch Drill Bit.
Features
- Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
- Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
- Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
- Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
- Designed for Specific Motors SkegGuard 27031 for Mercury MerCruiser: Alpha 1 Generation 2 1991-Present. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha
- See more on Amazon...
First Available: 10/17/2017
Brand: MEGAWARE KEELGUARD | Manufacturer: MEGAWARE KEELGUARD INC.
Dimensions: 20.00 x 1.25 x 9.00 inches | Weight: 1.50 Pounds
See On Amazon #6
27151 Stainless Steel Skeg Guard Fix Damaged Skeg Fit for Yamaha 150-175HP 2/4 Stroke / 200HP 2 Stroke HPDI /200 VMAX / 200HP 4 Stroke 2.8L I-4 / 300HP 4 Stroke
Asin: B0BXNXZVPJ | Model: 27151 Skeg Guard | PartNumber: 27151 Skeg Guard
Perfect Design – Design For Your Skeg, Drain Hole Prevents Against Corrosion/Freezing For Longer Wear. No Discernable Drag, Won't Compromise Performance, Avoid Expensive Repair Costs..
Satisfaction Guarantee - Besttruck Values Customers Shopping Experience And Provides Customers With A Good Shopping Environment. If You Are Not Satisfied With The Product, You Can Choose To Return It, We Support A 30-Day Full Refund And A One-Year Warranty..
Superior Material – Made Of 18-Gauge Marine-Grade 316 Stainless Steel. Mirror Polished To Improve The Gloss Of The Surface, Prevent Rust And Corrosion, Durable And Long Service Life. Meeting Or Exceeding Oem Specification..
Function – Protects Your Skeg From Corrosion And Wear In The Harsh Marine Environment. Thickened 3Mm Lower Wear Tab Reduces Ramp Dragging And Is Ideal For River Running. It Will Be Stronger And Much More Affordable Than Welding And Replacing A Lower Skeg..
Features
- Wide Application Fits for Yamaha 150 - 175hp 2 & 4 Stroke 1984 - Present; 200hp 2 Stroke HPDI 2000 - 2012; 200hp 4 Stroke 2.8L I-4 2012 - Present; 300hp 4 Stroke 2007 - 2009; 350hp 4 Stroke 2007 - Present; I/O Sterndrive Models 1989 - 1993. Fits for Mercury 225 - 250hp EFI 4 Stroke 2003 - 2005; Fits for Suzuki 300hp 4 Stroke 2009; 250, 300hp 4 Stroke 2006-2008; 150, 175, 200, 225hp 2 Stroke 1986 - 2002. Replace for part 27151.
- Function Protects your skeg from corrosion and wear in the harsh marine environment. Thickened 3mm lower wear tab reduces ramp dragging and is ideal for river running. It will be stronger and much more affordable than welding and replacing a lower skeg.
- Perfect Design Design for your skeg, drain hole prevents against corrosion/freezing for longer wear. No discernable drag, won't compromise Performance, avoid expensive repair costs.
- Superior Material Made of 18-Gauge Marine-Grade 316 Stainless Steel. Mirror polished to improve the gloss of the surface, prevent rust and corrosion, durable and long service life. Meeting or exceeding OEM specification.
- Satisfaction Guarantee - Besttruck values customers shopping experience and provides customers with a good shopping environment. If you are not satisfied with the product, you can choose to return it, we support a 30-day full refund and a one-year warranty.
- See more on Amazon...
Brand: besttruck | Manufacturer: besttruck
Dimensions: 1.10 x 17.60 x 7.90 inches
Warranty: 1 year warranty
See On Amazon #7
Sierra International 35-SS610 Marine-Grade Stainless Steel Panther Safe-Skeg for Mercruiser Alpha 1 Gen II Drives, 1991 to Present , Black
Asin: B004HYCC10 | Model: 35-SS610 | PartNumber: 35-SS610 | Ean: 0836125003530 | UPC: 836125003530
Contains A Drain Hole To Protect Against Corrosion And Freeze-Up.
Material Thickness: 1.5Mm (50% Thicker Than The Competition).
Fit Type: Universal Fit.
For: Mercruiser Inboard/Outboard – Alpha 1 Generation Ii Drives, Years 1991 To Present.
Brilliantly Polished With A Seamless Design.
Features
- Kit Includes: Safe-Skeg, Mounting Hardware, Instructions, Allen Wrench and Loctite 262
- Brilliantly Polished with a Seamless Design
- Contains a Drain Hole to Protect Against Corrosion and Freeze-Up
- For: Mercruiser Inboard/Outboard Alpha 1 Generation II Drives, Years 1991 to Present
- Material Thickness: 1.5mm (50% Thicker than the Competition)
- Fit Type: Universal Fit
- See more on Amazon...
First Available: 04/26/2013
Brand: Marinetech | Manufacturer: MARINETECH PRODUCTS INC.
Dimensions: 18.00 x 0.75 x 9.00 Inches | Weight: 1.00 pounds
Warranty: LIMITED WARRANTY
See On Amazon #8
sixcow Skeg Guard Keel Guard 27341 for Mercury Mariner 40/50 / 60HP 2 & 4 Stroke 2003-Present & Evinrude Johnson 40-50 HP 4 Stroke 1999-2003, SkegGuard KeelGuar
Asin: B0BX22GXPG | Model: 27341 | PartNumber: 27341
【Built For Marine Environment】 Keel Guard Constructed Of High Quality Marine-Grade 316 Stainless Steel Material With An Extra Reinforced 3Mm Lower Wear Tab Across The Bottom. Protect Against Ramp Dragging Or Damage From Hidden Debris. Corrosion Resistance And Resist Damage. Stable, Reliable And Long-Lasting Durability..
【100% Satisfaction Guarantee】 Your Satisfaction Is Our Priority. We Strive To Give Our Customers Excellent Service. All Sixcow Products Support 30-Day Money-Back Guarantee, 12-Month Warranty For Quality-Related Issues. Simply Return It For Your Warranty..
【Easy To Install】 It Takes A Breeze To Install. Simply Slide And Match The Skeg Guard To The Skeg. Use Mallet For Proper Fit. Drill Through With 1/4’’ Holes. Install Hardwares With Hex Wrenches Provided. Then, You’Re Ready To Go. Comes With Stainless Steel Self Locking Hardware And Hex Wrenches. Please Make Sure The Model Fits Well With The Skeg On Your Motor Before Purchase..
【Skeg Guard & Broken Skeg Fixer】 Indispensable Skegguard Not Only Protects Motor’S Skeg From Damage, Also Quickly Fixes Broken Skeg With As Little As 2-3 Inches Of Skeg Remaining. Meanwhile, Perfect Design With Drain Hole In The Bottom To Prevent Water From Collecting And Stagnating, Causing Corrosion. Matches Your Lower Unit To Ensure No Discernible Drag Or Compromise In Performance..
Features
- Great Compatibility 27341 SkegGuard kit is perfectly compatible with Evinrude / Johnson 40 - 50 hp 4 Stroke 1999-2003, Mercury / Mariner 40 hp / 50 hp / 60 hp 2 & 4 Stroke 2003-Present. Also available for many selected inboard/outboard engines such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo and Yamaha engines. Replace OE Part Number: 27341
- Skeg Guard & Broken Skeg Fixer Indispensable SkegGuard not only protects motor s skeg from damage, also quickly fixes broken skeg with as little as 2-3 inches of skeg remaining. Meanwhile, perfect design with drain hole in the bottom to prevent water from collecting and stagnating, causing corrosion. Matches your lower unit to ensure no discernible drag or compromise in performance.
- Built for Marine Environment Keel Guard Constructed of high quality marine-grade 316 stainless steel material with an extra reinforced 3mm lower wear tab across the bottom. Protect against ramp dragging or damage from hidden debris. Corrosion resistance and resist damage. Stable, reliable and long-lasting durability.
- Easy to Install It takes a breeze to install. Simply slide and match the skeg guard to the skeg. Use mallet for proper fit. Drill through with 1/4 holes. Install hardwares with hex wrenches provided. Then, you re ready to go. Comes with stainless steel self locking hardware and hex wrenches. Please make sure the model fits well with the skeg on your motor before purchase.
- 100% Satisfaction Guarantee Your satisfaction is our priority. We strive to give our customers excellent service. All Sixcow products support 30-Day money-back guarantee, 12-Month warranty for quality-related issues. Simply return it for your warranty.
- See more on Amazon...
Brand: sixcow | Manufacturer: sixcow
Warranty: 30-Day money-back guarantee, 12-Month warranty for quality-related issues
See On Amazon #9
Megaware Self-Adhesive DIY Keel Guard - Prolongs The Life of Your Boat - Protects from Abrasive Sand, Rocks and Oyster Beds - 9 Kit Sizes - 5 Inches Wide (Black)
Asin: B002PHW28Y | Model: 20207 | PartNumber: 20207 | Ean: 0014984004701, 0672057202074 | UPC: 014984004701, 672057202074
Superior Engineering - This Patented Hydrodynamic Drag Reduction Design Is Produced Using The Highest Quality Materials And 3M Premium Adhesives. Pliable And Tough, The 5-Inch Wide Boat Keel Protection Easily Conforms To Your Boat's Keel; It’S Shock Absorbing, Exclusive Contoured Edge Design, And Drag Reduction Channels Won't Slow Your Boat Down.
Lifetime Warranty - The Megaware Keelguard Is So Tough And Reliable That We Include A Lifetime Warranty During Normal Use Of Your Boat, For As Long As You Own Your Boat..
9 Standard Length Kits - Our Boat Keel Guard Comes In 9 Different Sizes That Range From 4 To 12 Feet Long To Ensure You Have The Correct Size; Shields Come In 12 Colors That Will Not Fade Or Dull While Enhancing The Look Of Your Boat. Note: If The Size Of Your Boat Falls Between 2 Sizes, Order A Size Up For Additional Keel Protection.
Easy To Install - The Boat Protector Features An Exclusive Self-Sealing Contoured Edge That Creates A Clean, Tight Seal; No Messy Sealants Needed. Easy Install In 4 Simple Steps; Etch, Clean, Prime, Apply!.
Features
- Boat Keel Protector - Protect your boat keel from sand, rocks, oyster beds, concrete ramps, and everyday wear and tear on the water with The Original Do-It-Yourself Keel Guard from Megaware. Note: compatible with fiberglass and some aluminum boats
- Easy to Install - The boat protector features an exclusive self-sealing contoured edge that creates a clean, tight seal; no messy sealants needed. Easy install in 4 simple steps; etch, clean, prime, apply!
- Superior Engineering - This patented hydrodynamic drag reduction design is produced using the highest quality materials and 3M premium adhesives. Pliable and tough, the 5-inch wide boat keel protection easily conforms to your boat's keel; it s shock absorbing, exclusive contoured edge design, and drag reduction channels won't slow your boat down
- 9 Standard Length Kits - Our boat keel guard comes in 9 different sizes that range from 4 to 12 feet long to ensure you have the correct size; shields come in 12 colors that will not fade or dull while enhancing the look of your boat. Note: if the size of your boat falls between 2 sizes, order a size up for additional keel protection
- Lifetime Warranty - The Megaware KeelGuard is so tough and reliable that we include a lifetime warranty during normal use of your boat, for as long as you own your boat.
- See more on Amazon...
Brand: MEGAWARE KEELGUARD | Manufacturer: Megaware KeelGuard
Dimensions: 13.00 x 9.00 x 5.00 inches | Weight: 3.97 pounds
Warranty: limited warranty
See On Amazon #10
Megaware - XL ScuffBuster Bow Guard for Boats - Protects from Scuffs and Scratches - Stainless Steel Shield with 3M Adhesive - Mirror Polished Finish (9 x 8.75 in)
Asin: B015D0A9G6 | Model: 80637 | PartNumber: 80637 | Ean: 0687965400948, 0672057806371 | UPC: 672057806371, 687965400948
Superior Engineering - Our Boat Guard Is Made With Anti-Corrosive, 22-Gauge Stainless Steel Metal With A Mirror-Polished Finish And Easily Bends To Your Boat's Hull To Shield The Gelcoat From Minor Damage When Trailering; Great For Fiberglass And Most Aluminum Boats.
Instructions Included - An Instruction Sheet Is Provided In Each Package And Must Be Strictly Followed So As To Not Compromise The Full Bonding Capabilities Of The 3M Adhesive..
The Perfect Size - The Extra-Large Bow Guard Measures 9 X 8.75 Inches To Ensure A Proper Fit For Standard-Size Or Larger Boats; Your Boat Bow Will Be Well Protected When Docking So You No Longer Have To Worry About Damage To Your Hull Or Bow.
Easy To Install - This Boat Bow Protector Features A 3M Adhesive That Is Easy To Install In Just 4 Simple Steps; Prep The Surface, Bend It To Conform To Your Hull, Peel Off The Backing And Attach It To The Surface While Applying Pressure; Use A Rubber Mallet To Activate The Pressure Sensitive Adhesive.
Features
- Boat Bow Protector - Protect your vessel from trailer roller scuffs, scratches, and everyday wear and tear on the water with the Scuffbuster Bow Guard from Megaware that's perfect to add to your boat supplies
- Easy to Install - This boat bow protector features a 3M adhesive that is easy to install in just 4 simple steps; prep the surface, bend it to conform to your hull, peel off the backing and attach it to the surface while applying pressure; use a rubber mallet to activate the pressure sensitive adhesive
- Superior Engineering - Our boat guard is made with anti-corrosive, 22-gauge stainless steel metal with a mirror-polished finish and easily bends to your boat's hull to shield the gelcoat from minor damage when trailering; great for fiberglass and most aluminum boats
- The Perfect Size - The extra-large bow guard measures 9 x 8.75 inches to ensure a proper fit for standard-size or larger boats; your boat bow will be well protected when docking so you no longer have to worry about damage to your hull or bow
- Instructions Included - An instruction sheet is provided in each package and must be strictly followed so as to not compromise the full bonding capabilities of the 3M adhesive.
- See more on Amazon...
Brand: MEGAWARE KEELGUARD | Manufacturer: Megaware KeelGuard
Dimensions: 8.75 x 9.00 x 0.03 inches | Weight: 0.73 Pounds
See On Amazon
Looking For Something Else?
Search