Drill America - DWDRSD3/8X13/32 13/32" High Speed Steel Reduced Shank Drill Bit with 3/8" Shank, DWDRSD Series
Asin: B00FXICLFG | Model: DWDRSD3/8X13/32 | PartNumber: DWDRSD3/8X13/32 | Ean: 0887861033695 | UPC: 887861033695
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon Similar To Drill America DWDRSD3 8X13 32
#1
Owl Tools 13/32 Cobalt Drill Bits - 3 Pack - 5.25 Inch Length - M35 Cobalt Drill Bits with Storage Case - Perfect Drill Bits for Metal, Hardened & Stainless Steel, Cast Iron, and More!
Asin: B0CHGRXHH6 | Ean: 0810147650033 | UPC: 810147650033
Plastic Storage Case Included - Incredibly Tough And Durable Plastic Case. Perfect For Keeping Your Cobalt Drill Bits Neatly Organized And Safe..
Lifetime Guarantee - Here At Owl Tools (Usa Based Company) We Only Care About Your Satisfaction. We Try Our Best To Ensure Each Product Is In Perfect Condition Before You Get It, But If Something Is Not Up To Your Satisfaction, Please Contact Us For A Full Refund Or Replacement..
Cobalt Drill Bits Are The Perfect Drill Bits For Metal - As Well As Other Hard Materials Such As Stainless Steel, Hardened Steel, Cast Iron, Bronze, Titanium, And More!.
M35, Fully Ground, 135° Split Point - Our Drill Bits Contain 5% Cobalt, Are Fully Grounded For A Precision Drilling Diameter. 135° Split Point Design Makes It Easier To Drill Repeated Holes In Harder Materials..
Features
- 3 PACK OF 13/32" COBALT DRILL BITS - 13/32" Diameter with a Flute Length of 3.5" and Total length of 5.25"
- M35, FULLY GROUND, 135 SPLIT POINT - Our Drill Bits Contain 5% Cobalt, Are Fully Grounded for a Precision Drilling Diameter. 135 Split Point Design Makes it Easier to Drill Repeated Holes in Harder Materials.
- PLASTIC STORAGE CASE INCLUDED - Incredibly Tough and Durable Plastic Case. Perfect for Keeping Your Cobalt Drill Bits Neatly Organized and Safe.
- COBALT DRILL BITS ARE THE PERFECT DRILL BITS FOR METAL - As well as other hard materials such as Stainless Steel, Hardened Steel, Cast Iron, Bronze, Titanium, and More!
- LIFETIME GUARANTEE - Here at Owl Tools (USA Based Company) we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
- See more on Amazon...
Brand: Owl Tools | Manufacturer: Owl Tools
See On Amazon #2
BOSCH CO2153 1-Piece 13/32 In. x 5-1/4 In. Cobalt Metal Drill Bit for Drilling Applications in Light-Gauge Metal, High-Carbon Steel, Aluminum and Ally Steel, Cast Iron, Stainless Steel, Titanium
Asin: B0002EVFJE | Model: CO2153 | PartNumber: CO2153 | Ean: 0000346333657 | UPC: 000346333657
Surface Hardened To Penetrate Tough Abrasive Materials.
Best Used For Drilling Into Light-Gauge Metal, High-Carbon Steel, Aluminum And Ally Steel, Cast Iron, Stainless Steel And Titanium.
Available In Jobber Length, Full Shank.
Rigid, Thick Web Design Adds Stability To Bit In Tough Applications.
Features
- Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)
- Rigid, thick web design adds stability to bit in tough applications
- Surface hardened to penetrate tough abrasive materials
- Available in jobber length, full shank
- Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium
- See more on Amazon...
Brand: BOSCH | Manufacturer: Bosch
Dimensions: 0.00 x 0.00 x 0.00 inches
Warranty: No
See On Amazon #3
BOSCH BL2153 1-Piece 13/32 In. x 5-1/4 In. Fractional Jobber Black Oxide Drill Bit for Applications in Light-Gauge Metal, Wood, Plastic
Asin: B000PDOKKI | Model: BL2153 | PartNumber: BL2153 | Ean: 0000346331462 | UPC: 000346331462
Easier Drilling, Reduced Heat And Extended Drill Bit Life.
For Use In Steel, Copper, Aluminum, Brass, Oak, Maple, Mdf, Pine, Pvc, Polycarbonate, Acrylic, Abs, Nylon And Composite Materials.
Available In Jobber Length, Stubby Length, Extended Length (Aircraft), 1/2 In. Reduced Shank (Silver And Deming).
Last 50 Percent Longer Than High-Speed Steel.
Features
- Speed helix design for three times faster drilling than standard bits
- Last 50 percent longer than high-speed steel
- Easier drilling, reduced heat and extended drill bit life
- Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
- For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
- See more on Amazon...
Brand: BOSCH | Manufacturer: Bosch
Dimensions: 0.00 x 0.00 x 0.00 inches
Warranty: No
See On Amazon #4
Irwin Tools 3016026 Single Cobalt Alloy Steel High-Speed Steel Drill Bit with Reduced Shank, 13/32" x 5-1/4"
Asin: B000C171AE | Model: 3016026 | PartNumber: 3016026 | Ean: 0024721067173 | UPC: 024721067173
135-Degree Split-Point Tip Starts Drilling Immediately With Less Force And Eliminates "Walking" Across The Work Surface.
Bit Has A Straight Shank.
Made From Industrial Grade High-Speed Steel For Increased Durability. 8% Cobalt Alloy Steel Is Heat And Abrasion-Resistant.
Features
- Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel
- Made from industrial grade High-Speed Steel for increased durability. 8% Cobalt alloy steel is heat and abrasion-resistant
- 135-degree split-point tip starts drilling immediately with less force and eliminates walking across the work surface
- Bit has a straight shank
- See more on Amazon...
Brand: IRWIN | Manufacturer: IRWIN
Dimensions: 0.60 x 6.50 x 1.50 inches | Weight: 0.03 pounds
See On Amazon #5
Drill America DWDRSD27/32 27/32" Reduced Shank High Speed Steel Drill Bit with 1/2" Shank, DWDRSD Series
Asin: B00FXIC5FC | Model: DWDRSD27/32 | PartNumber: DWDRSD27/32 | Ean: 0887861034135 | UPC: 887861034135
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Drilling In Low And Medium Tensile Strength Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for drilling in low and medium tensile strength materials
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 0.45 pounds
See On Amazon #6
Drill America - DWDDL8X13/32 13/32" x 8" High Speed Steel Extra Long Drill Bit, DWDDL Series
Asin: B00FXHNXG8 | Model: DWDDL8X13/32 | PartNumber: DWDDL8X13/32 | Ean: 0887861060615 | UPC: 887861060615
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #7
MAXTOOL 13/32" 2pcs Identical Jobber Length Drills HSS M2 Twist Drill Bits Fully Ground Black & Bronze Straight Shank Drills; JBF02H10R26P2
Asin: B085GLBK75 | Model: JBF02H10R26P2 | PartNumber: JBF02H10R26P2 | Ean: 0634301943676 | UPC: 634301943676
Fully Ground Process Ensures Excellent Chips Moving, And 135 Deg Chisel Angle With Split Point Provide Accuracy Start For Quick Penetration Without Walking And Less Logging.
Jobber Length Twist Drill Bits With Straight Shank For Cutting Metal, Plastic, And Wood Etc; 1/64” To 17/64” Are Available.
Precision Treatment Makes Drills Durable Toughness, Withstands Heavy Duty Operation, Resists Corrosion And Lubricates The Drill Bits Better For Cutting Smoothly.
All Drill Dimensional & Tolerances Conform To Asme/Ansi B94.11M Drill Standards Or Uscti - United States Cutting Tool Institute (Formerly Mcti).
Features
- Quality high speed steel ensures the bits super hard, sharp and cutting effectively with impressive cutting performance in metal, plastic, and wood etc with long tool life
- All drill dimensional & tolerances conform to ASME/ANSI B94.11M drill standards or USCTI - United States Cutting Tool Institute (formerly MCTI)
- Fully ground process ensures excellent chips moving, and 135 deg chisel angle with split point provide accuracy start for quick penetration without Walking and less Logging
- Precision treatment makes drills durable toughness, withstands heavy duty operation, resists corrosion and lubricates the drill bits better for cutting smoothly
- Jobber Length Twist Drill Bits with Straight Shank for cutting metal, plastic, and wood etc; 1/64 to 17/64 are available
- See more on Amazon...
Brand: MaxTool | Manufacturer: TianShun Tool
Dimensions: 0.41 x 5.34 x 0.41 inches | Weight: 306.00 Grams
See On Amazon #8
Drill America 13 Piece Heavy Duty High Speed Steel Drill Bit Set with Black and Gold Finish (1/16" - 1/4" x 64ths), KFD Series
Asin: B00B0ZTSHA | Model: KFD13J-SET | PartNumber: KFD13J-SET | Ean: 0887861039307 | UPC: 887861039307
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
13 Piece Drill Bit Set Comes In A Metal Case.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 13 piece drill bit set comes in a metal case
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #9
Drill America - DWDDL12X13/32 13/32" x 12" High Speed Steel Extra Long Drill Bit, DWDDL Series
Asin: B00FXHHZYY | Model: DWDDL12X13/32 | PartNumber: DWDDL12X13/32 | Ean: 0887861061049 | UPC: 887861061049
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #10
Drill America - GLBCOX1213/32 13/32" x 12" Cobalt Aircraft Extension Drill Bit, GLBCO Series
Asin: B00B2QXZ1W | Model: GLBCOX1213/32 | PartNumber: GLBCOX1213/32 | Ean: 0887861046404 | UPC: 887861046404
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
12" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 12 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon
Looking For Something Else?
Search