Drill America #1 Tin-Coated Drill Bit (Pack of 12), DWDTN Series
Asin: B00FXIYS20 | Model: DWDTN1P12 | PartNumber: DWDTN1P12 | Ean: 0887861200103 | UPC: 887861200103
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Hard Metals, Work Hardened Stainless And Other Difficult To Drill Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for hard metals, work hardened stainless and other difficult to drill materials
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon Similar To Drill America 1 TinCoated Drill
#1
Drill America - DWDRSD1 1" Reduced Shank High Speed Steel Drill Bit with 1/2" Shank, DWDRSD Series
Asin: B00FXIBJ9U | Model: DWDRSD1 | PartNumber: DWDRSD1 | Ean: 0887861034234 | UPC: 887861034234
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Drilling In Low And Medium Tensile Strength Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for drilling in low and medium tensile strength materials
- See more on Amazon...
Brand: Drill America | Manufacturer: Chicology
Dimensions: 0.80 x 7.70 x 1.70 inches | Weight: 0.55 pounds
See On Amazon #2
Drill America - KFDRSD1-1/4 1-1/4" Reduced Shank High Speed Steel Black & Gold KFD Drill Bit with 1/2" Shank, KFD Series
Asin: B00AYZ4GCO | Model: KFDRSD1-1/4 | PartNumber: KFDRSD1-1/4 | Ean: 0887861037334 | UPC: 887861037334
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Heavy Duty 135 Degree Split Point.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold And Black Surface Treated For Use In Stainless Steel And Other Hard Metal Drilling.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Gold and black surface treated for use in stainless steel and other hard metal drilling
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Heavy duty 135 degree split point
- See more on Amazon...
Brand: Drill America | Manufacturer: Chicology
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 1.00 Pounds
See On Amazon #3
Drill America - DWDCO1-1/8 1-1/8" Reduced Shank Cobalt Drill Bit with 1/2" Shank, DWDCO Series
Asin: B00FXH8CJ6 | Model: DWDCO1-1/8 | PartNumber: DWDCO1-1/8 | Ean: 0887861042246 | UPC: 887861042246
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to National Aerospace standard 907
- See more on Amazon...
Brand: Drill America | Manufacturer: Chicology
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #4
Drill America 1-1/4" Reduced Shank High Speed Steel Black & Gold Contractor Drill Bit with 3-Flat 1/2" Shank, KFD3F Series
Asin: B08SDR58MP | Model: KFD3F1-1/4 | PartNumber: KFD3F1-1/4 | Ean: 0887861294614 | UPC: 887861294614
135 Degree Split Point Tip For Self-Centering And Reducing Thrust. Compared To A Conventional 118 Degree Tip, These Drills Wont Go "Walking" On You..
Common Flute And Overall Length For Minimal Adjustment During Tool Changes. 3" Flute Length, 6" Overall Length, 1/2" Shank.
3-Flat 1/2" Reduced Shank Creates An Extra Secure Hold In Your Chuck..
For Use In A Wide Range Of Materials In The Iron And Steel Families Such Aluminum, Iron, Steel And Other Metal Drilling..
Features
- Contractor grade drill bit manufactured from M1 High Speed Steel.
- For use in a wide range of materials in the iron and steel families such aluminum, iron, steel and other metal drilling.
- 135 degree split point tip for self-centering and reducing thrust. Compared to a conventional 118 degree tip, these drills wont go walking on you.
- 3-Flat 1/2 reduced shank creates an extra secure hold in your chuck.
- Common flute and overall length for minimal adjustment during tool changes. 3 Flute Length, 6 Overall Length, 1/2 Shank
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 1.25 x 6.00 x 1.25 inches
See On Amazon #5
Drill America - KFD15J-SET 15 Piece Heavy Duty High Speed Steel Drill Bit Set with Black and Gold Finish, KFD Series
Asin: B00B0ZTZQ4 | Model: KFD15J-SET | PartNumber: KFD15J-SET | Ean: 0887861039314 | UPC: 887861039314
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
15 Piece Drill Bit Set Comes In A Metal Case.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 15 piece drill bit set comes in a metal case
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 1.29 Pounds
See On Amazon #6
Drill America - KFD1008-SET 8 Piece Heavy Duty High Speed Steel Reduced Shank Drill Bit Set (9/16" - 1" x 16ths), KFD Series
Asin: B00B0XJ4QM | Model: KFD1008-SET | PartNumber: KFD1008-SET | Ean: 0887861039383 | UPC: 887861039383
135 Degree Split Point Tip For Self-Centering And Reducing Thrust.
Reduced Shank Drills Expand The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
8 Piece Set With 1/2" Reduced Shank Drill Bits.
Black And Gold Surface Treated For Use In Stainless Steel And Other Hard Metal Drilling.
For Use In A Wide Range Of Materials In The Iron And Steel Families Such Aluminum, Iron, Stainless Steel And Other Hard Metal Drilling.
Features
- Manufactured from M2 premium grade high speed steel
- For use in a wide range of materials in the iron and steel families such aluminum, iron, stainless steel and other hard metal drilling
- 135 degree split point tip for self-centering and reducing thrust
- Black and gold surface treated for use in stainless steel and other hard metal drilling
- Reduced Shank Drills expand the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- 8 Piece Set with 1/2 Reduced Shank Drill Bits
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 4.00 pounds
See On Amazon #7
Drill America - DWDCO1P12 #1 Cobalt Drill Bit (Pack of 12), DWDCO Series
Asin: B00FXH7ORM | Model: DWDCO1P12 | PartNumber: DWDCO1P12 | Ean: 0887861198431 | UPC: 887861198431
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Drilling In Tough, High Tensile Strength Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for drilling in tough, high tensile strength materials
- See more on Amazon...
First Available: 05/15/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #8
Drill America #1 High Speed Steel Polished Drill Bit (Pack of 12), D/AP Series
Asin: B00FX8P7RU | Model: D/AP1P12 | PartNumber: D/AP1P12 | Ean: 0887861188579 | UPC: 887861188579
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Production, Maintenance Or Portable Drilling Jobs.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for production, maintenance or portable drilling jobs
- See more on Amazon...
First Available: 03/12/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #9
Drill America KFD1P12 #1 High Speed Steel Black & Gold KFD Split Point Drill Bit (Pack of 12), KFD Series
Asin: B00FXN10ZI | Model: KFD1P12 | PartNumber: KFD1P12 | Ean: 0887861205443 | UPC: 887861205443
135° Split Point Tip Prevents Drill From "Walking".
Black And Gold Drills Are Manufactured From Premium Grade High Speed Steel.
Combination Of Hardness And Toughness For Wear Resistance.
For Use In Wood, Metal, Stainless And Other Hard Metal Drilling.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- For use in wood, metal, stainless and other hard metal drilling
- 135 split point tip prevents drill from walking
- Combination of hardness and toughness for wear resistance
- Black and gold drills are manufactured from premium grade high speed steel
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #10
Drill America #1 x 12" Cobalt Aircraft Extension Drill Bit, GLBCO Series, 1 (Pack of 1)
Asin: B00B2R0EGK | Model: GLBCOX121 | PartNumber: GLBCOX121 | Ean: 0887861045667 | UPC: 887861045667
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
12" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 12 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #11
Drill America 10-24 High Speed Steel Tin Coated 4 Flute Plug Tap, T/A Series
Asin: B01BOGTHAC | Model: T/A54330TN | PartNumber: T/A54330TN | Ean: 0887861069182 | UPC: 887861069182
Country Of Origin : United States.
Part Number: T/A54330tn.
Package Weight : 1 Pounds.
Features
- Package Dimensions: 6.0 L x 2.0 H x 3.0 W (inches)
- Package Weight : 1 pounds
- Country of Origin : United States
- Part number: T/A54330TN
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #12
Drill America #1 x 6"" Cobalt Aircraft Extension Drill Bit, GLBCO Series,#1 (Pack of 1)
Asin: B00B2QYSEK | Model: GLBCOX61 | PartNumber: GLBCOX61 | Ean: 0887861044639 | UPC: 887861044639
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
6" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 6 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #13
Drill America - DWC5-530-145 1-1/4" X 1" High Speed Steel Annular Cutter, DWC Series
Asin: B00FXEXC9E | Model: DWC5-530-145 | PartNumber: DWC5-530-145 | Ean: 0887861000369 | UPC: 887861000369
High-Speed Steel Tools Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
For Use With Magnetic Drill Press Only. Do Not Use With A Standard Hand Drill Or Drill Press.
Pilot Pin Included..
3/4" Weldon Shank Features A Round Shank With One Of More Flats Machined Into The Side For Easy Indexing And Alignment. Fits Most Magnetic Drill Presses..
Features
- Annular cutters are designed for fast, efficient hole making and cut only that material necessary to produce a quality hole.
- 3/4 Weldon shank features a round shank with one of more flats machined into the side for easy indexing and alignment. Fits most magnetic drill presses.
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Pilot pin included.
- For use with magnetic drill press only. Do not use with a standard hand drill or drill press
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #14
Drill America 60 Piece High Speed Steel Screw Machine (Stub) Drill Bit Set (Wire Sizes: #1 - #60), D/AST Series
Asin: B00B0XJ1VU | Model: D/A60S-SET | PartNumber: D/A60S-SET | Ean: 0887861038287 | UPC: 887861038287
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
60 Piece Drill Bit Set Comes In A Metal Case.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 60 piece drill bit set comes in a metal case
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches | Weight: 1.00 pounds
See On Amazon #15
Drill America 60 Piece m42 Cobalt Drill Bit Set (Wire Sizes: #1 - #60), D/ACO Series
Asin: B00AZO4P7A | Model: D/A60J-CO-SET | PartNumber: D/A60J-CO-SET | Ean: 0887861038195 | UPC: 887861038195
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #16
Drill America DWT54454TN Tin-Coated Plug Tap, 1/4"-20
Asin: B01BOGTAWC | Model: DWT54454TN | PartNumber: DWT54454TN | Ean: 0887861318730 | UPC: 887861318730
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #17
Drill America - DWDN1P12 #1 High Speed Steel Black Oxide Drill Bit (Pack of 12), DWDN Series
Asin: B00FXI3I1M | Model: DWDN1P12 | PartNumber: DWDN1P12 | Ean: 0887861191500 | UPC: 887861191500
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Production, Maintenance Or Portable Drilling Jobs.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for production, maintenance or portable drilling jobs
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #18
Drill America 1/4"-20 High Speed Steel Tin Coated 2 Flute Spiral Pointed Tap, T/A Series
Asin: B01BOGTJRI | Model: T/A57129TN | PartNumber: T/A57129TN | Ean: 0887861069274 | UPC: 887861069274
For Use In Metal.
Country Of Origin: United States.
Tap.
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #19
Drill America 1-1/4" x 18" HSS Extra Long Drill Bit with 3/4" Shank
Asin: B09BG1FFNT | Model: DWDDL18X1-1/4X3/4 | PartNumber: DWDDL18X1-1/4X3/4 | Ean: 0887861308199 | UPC: 887861308199
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.50 x 18.00 x 2.50 Inches
See On Amazon #20
Drill America 115 Piece Tin-Coated Drill Bit Set (1/16"-1/2", A-Z, 1-#60), DWDTN Series
Asin: B00FXGME46 | Model: DWD115J-TN-SET | PartNumber: DWD115J-TN-SET | Ean: 0887861038744 | UPC: 887861038744
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Hard Metals, Work Hardened Stainless And Other Difficult To Drill Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for hard metals, work hardened stainless and other difficult to drill materials
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 8.80 Pounds
See On Amazon
Looking For Something Else?
Search