Drill America 1/2" High Speed Steel 2MT Taper Shank Drill Bit, DWDTS Series -DWDTS1/2
Asin: B00FXJ3YB0 | Model: DWDTS1/2 | PartNumber: DWDTS1/2 | Ean: 0887861048194 | UPC: 887861048194
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Morse Taper Shank Allows The Tool To Be Inserted Directly Into The Machine's Spindle To Facilitate High-Torque Applications Such As Large Cut Diameters.
Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Designed to perform in a broad range of materials in the iron and steel families
- See more on Amazon...
First Available: 11/25/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon Similar To Drill America 1 2 High
#1
Drill America - DWDRSD5/8 5/8" Reduced Shank High Speed Steel Drill Bit with 1/2" Shank, DWDRSD Series
Asin: B00FXIEV0O | Model: DWDRSD5/8 | PartNumber: DWDRSD5/8 | Ean: 0887861033992 | UPC: 887861033992
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Drilling In Low And Medium Tensile Strength Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for drilling in low and medium tensile strength materials
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 0.40 x 7.00 x 0.60 inches | Weight: 0.30 pounds
See On Amazon #2
Drill America Drill Bit Index/Case, 1/16-1/2 by 64ths (29 Sizes), 10550
Asin: B01BSZLSZQ | Model: HUT29 | PartNumber: HUT29 | Ean: 0745682272757 | UPC: 745682272757
Fits In 2″ Deep Tool Drawer.
Made In U.S.A..
Corrosion Resistant, Epoxy Baked On Coating With A Secure, Snap-Lock Steel Cover.
Each Storage Hole Precisely Sized For Accurate, Quick Selection.
Features
- Rugged, heavy gauge all steel case holds sizes 1/16-1/2 by 64ths (29 Sizes)
- Each storage hole precisely sized for accurate, quick selection
- Fits in 2 deep tool drawer
- Corrosion resistant, epoxy baked on coating with a secure, snap-lock steel cover
- Made in U.S.A.
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 1.00 x 7.00 x 48.00 inches | Weight: 1.00 pounds
See On Amazon #3
Drill America - POU3/8NPTW/DRILL 3/8" Carbon Steel NPT Pipe Tap and 37/64" High Speed Steel Drill Bit Set, POU Series
Asin: B01MFG7R5Q | Model: POU3/8NPTW/DRILL | PartNumber: POU3/8NPTW/DRILL | Ean: 0887861241847 | UPC: 887861241847
3/8" Carbon Steel Npt Tap And 37/64" Hss Drill Bit With 1/2" Shank.
Set Contains Matching Npt Pipe Tap And High Speed Steel Drill Bit.
Set Comes In Plastic Pouch.
Black Oxide Drill Bit Is Ideal For Production, Maintenance Or Portable Drilling Jobs.
Features
- Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads
- Black oxide drill bit is ideal for production, maintenance or portable drilling jobs
- 3/8 carbon steel NPT tap and 37/64 HSS drill bit with 1/2 Shank
- Set comes in plastic pouch
- Set contains matching NPT pipe tap and high speed steel drill bit
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 0.51 pounds
See On Amazon #4
Drill America POUM6X1 m6 x 1 Tap and 5.00mm Drill Bit Kit, POU Series
Asin: B0714781T6 | Model: POUM6X1 | PartNumber: POUM6X1 | Ean: 0887861290258 | UPC: 887861290258
Black Oxide Drill Bit Is Ideal For Production, Maintenance Or Portable Drilling Jobs.
Set Comes In Plastic Pouch.
M6 X 1 Hss Plug Tap And Matching 5.00Mm Hss Drill Bit In Plastic Pouch.
High Speed Steel Plug Hand Threading Tap Is Popular For Use In General Machine Tapping Or Cnc Tapping.
Features
- Set contains high speed steel plug hand tap and matching high speed steel drill bit
- High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping
- Black oxide drill bit is ideal for production, maintenance or portable drilling jobs
- M6 x 1 hss plug tap and matching 5.00Mm hss drill bit in plastic pouch
- Set comes in plastic pouch
- See more on Amazon...
First Available: 05/11/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #5
Drill America - KFD29J-PC 29 Piece Heavy Duty High Speed Steel Drill Bit Set with Black and Gold Finish in Round Case (1/16" - 1/2" x 64ths), KFD Series
Asin: B00B0327QQ | Model: KFD29J-PC | PartNumber: KFD29J-PC | Ean: 0887861039406 | UPC: 887861039406
Black And Gold Oxide Finish Resists Corrosion And Increases The Hardness Of The Drill Bit.
Comes In A Plastic Storage Case.
Self-Centering 135-Degree Split Point Penetrates Hard Material Without A Pilot Hole And Produces Small Chips To Reduce Clogging.
High-Speed Steel (Hss) Provides Hardness For Wear Resistance.
Features
- Assortment of 29 jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments
- High-speed steel (HSS) provides hardness for wear resistance
- Black and gold oxide finish resists corrosion and increases the hardness of the drill bit
- Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
- Comes in a plastic storage case
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 3.50 x 7.00 x 3.25 inches | Weight: 2.08 pounds
See On Amazon #6
Drill America 1/4"-20 UNC High Speed Steel Tap Set
Asin: B00FXJVFLQ | Model: DWT54460 | PartNumber: DWT54460 | Ean: 0887861071512 | UPC: 887861071512
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #7
Drill America - KFDRSD9/16 9/16" Reduced Shank High Speed Steel Black & Gold KFD Drill Bit with 1/2" Shank, KFD Series
Asin: B00AYZ2N5G | Model: KFDRSD9/16 | PartNumber: KFDRSD9/16 | Ean: 0887861037013 | UPC: 887861037013
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Heavy Duty 135 Degree Split Point.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold And Black Surface Treated For Use In Stainless Steel And Other Hard Metal Drilling.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Gold and black surface treated for use in stainless steel and other hard metal drilling
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Heavy duty 135 degree split point
- See more on Amazon...
Brand: Drill America | Manufacturer: Chicology
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #8
Drill America DMOD1/8 1/8" Solid Carbide Drill Bit, DMOD Series
Asin: B01LY0OYC5 | Model: DMOD1/8 | PartNumber: DMOD1/8 | Ean: 0887861047654 | UPC: 887861047654
Used On Materials Such As Cast Iron, Non-Ferrous Alloys, High Silicon Aluminum, Copper, Plastics, Bronze, Hard Rubber, Plexiglass, And Other Similar Materials.
Must Be Used With A Rigid Tool-Holding Systems..
Solid Carbide Tools Offer Long Tool Life And Faster Cutting Speeds Than Other Substrates, But Are More Brittle.
Can Be Used In High Temperature Drilling Applications.
Features
- Designed for drilling abrasive materials when drilling accuracy must be maintained
- Can be used in high temperature drilling applications
- Used on materials such as cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, bronze, hard rubber, plexiglass, and other similar materials
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle
- Must be used with a rigid tool-holding systems.
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #9
Drill America - DWD29J-CO-PC 29 Piece M35 Cobalt Drill Bit Set in Round Case (1/16" - 1/2" X 64ths), DWDCO Series
Asin: B00FXGOMIW | Model: DWD29J-CO-PC | PartNumber: DWD29J-CO-PC | Ean: 0887861039055 | UPC: 887861039055
Gold Oxide Finish Lubricates The Drill Bit And Provides Wear Resistance.
Meets Ansi Specifications.
Self-Centering 135-Degree Split Point Penetrates Hard Material Without A Pilot Hole And Produces Small Chips To Reduce Clogging.
Cobalt Steel Provides Extended Tool Life Compared To High-Speed Steel Drill Bits When Drilling Hard Materials.
Features
- Set of 29 jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments
- Cobalt steel provides extended tool life compared to high-speed steel drill bits when drilling hard materials
- Gold oxide finish lubricates the drill bit and provides wear resistance
- Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
- Meets ANSI specifications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Weight: 2.20 pounds
See On Amazon #10
Drill America - DWDA/CX61/8 1/8" x 6" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series
Asin: B00B1C8OTU | Model: DWDA/CX61/8 | PartNumber: DWDA/CX61/8 | Ean: 0887861043229 | UPC: 887861043229
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to national aerospace standard 907
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #11
Drill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wooden Case
Asin: B07B7SNCJ7 | Model: DWTPT1/8-1SET | PartNumber: DWTPT1/8-1SET | Ean: 0887861241595 | UPC: 887861241595
The Nominal Size Of A Pipe Tap Is That Of The Pipe Fitting To Be Tapped, Not The Actual Size Of The Tap..
The Thread Tapers 3/4 Of An Inch Per Foot. All Pipe Taps Furnished With A 2-1/2 To 3-1/2 Thread Chamfer..
Also Called 'Pipe Taps', National Pipe Taper (Npt) Taps Are Appropriate For Threading A Wide Variety Of Materials Both Ferrous And Non-Ferrous..
Features
- Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
- Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
- The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
- The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
- See more on Amazon...
First Available: 03/04/2018
Brand: Drill America | Manufacturer: Drill America
Dimensions: 4.00 x 6.00 x 6.00 inches | Weight: 2.50 Pounds
See On Amazon #12
Drill America - KFD1/8P12 1/8" High Speed Steel Black & Gold KFD Split Point Drill Bit (Pack of 12), KFD Series
Asin: B00FXN1FRG | Model: KFD1/8P12 | PartNumber: KFD1/8P12 | Ean: 0887861206013 | UPC: 887861206013
135° Split Point Tip Prevents Drill From "Walking".
Black And Gold Drills Are Manufactured From Premium Grade High Speed Steel.
Combination Of Hardness And Toughness For Wear Resistance.
For Use In Wood, Metal, Stainless And Other Hard Metal Drilling.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- For use in wood, metal, stainless and other hard metal drilling
- 135 split point tip prevents drill from walking
- Combination of hardness and toughness for wear resistance
- Black and gold drills are manufactured from premium grade high speed steel
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 0.00 pounds
See On Amazon #13
Drill America DWTPT1-1/2 1-1/2"-11-1/2 NPT Pipe Tap, Carbon Steel, DWTPT Series
Asin: B00FXKVZ1U | Model: DWTPT1-1/2 | PartNumber: DWTPT1-1/2 | Ean: 0887861076333 | UPC: 887861076333
Round Shank With Square End.
Right-Hand Cut Tools Have A Cutting Action That Engages When They Are Run In A Clockwise Direction.
Straight Flute Tools Allow Chips To Collect In The Flutes As They Cut And Are Well Suited For Most Applications In Shallow Cuts.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shank with square end
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
- Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 1.00 Pounds
See On Amazon #14
Drill America DWTT1/2-13 1/2"-13 Carbon Steel Taper Tap (Pack of 1), DWT Series, Uncoated (Bright)
Asin: B01EOD2EW0 | Model: DWTT1/2-13 | PartNumber: DWTT1/2-13 | Ean: 0887861077491 | UPC: 887861077491
Carbon Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Straight Flute Tools Allow Chips To Collect In The Flutes As They Cut And Are Well Suited For Most Applications In Shallow Cuts.
Carbon Steel Hand Taps May Also Be Used To Thread Mild Steels.
Features
- Used to re-thread damaged and/or jammed threads
- Carbon Steel Hand Taps may also be used to thread mild steels
- Carbon steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #15
Drill America - DWDA/CX121/8 1/8" x 12" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series
Asin: B00B2QWSME | Model: DWDA/CX121/8 | PartNumber: DWDA/CX121/8 | Ean: 0887861044387 | UPC: 887861044387
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of tool holding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to national aerospace standard 907
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 1.00 Pounds
See On Amazon #16
Drill America - DWT57129 1/4"-20 High Speed Steel 2 Flute Spiral Point Tap, DWT Series
Asin: B00BD5Q0BE | Model: DWT57129 | PartNumber: DWT57129 | Ean: 0887861075398 | UPC: 887861075398
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #17
Drill America - D/A29J-CO-PC 29 Piece M42 Cobalt Drill Bit Set in Round Case (1/16" - 1/2" X 64ths), D/ACO Series
Asin: B00B0326OE | Model: D/A29J-CO-PC | PartNumber: D/A29J-CO-PC | Ean: 0887861038508 | UPC: 887861038508
Gold Oxide Finish Acts As A Lubricant And Provides Wear Resistance.
Effortlessly Grip The Set In 1 Hand As You Would A Travel Coffee Mug Or Leave It In The Cup Holder Of Your Truck While On The Way To A Job.
When All Hands Are On Deck, Hang The Drill Index On Your Belt Whether You're In The Shop Or Field.
Manufactured To Aerospace Standard 907 And Display High Red Hardness, Permitting Speeds Up To 30% Greater Than With Conventional M2 High Speed Steel.
Cobalt Steel Provides Extended Tool Life Compared To High-Speed Steel Drill Bits, And Maintains The Tool's Toughness And Hardness In High Drilling Temperatures.
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Unique Round Drill Index Combines Form And Function Into 1 Beautifully Designed, Easy To Carry Drill Set.
Cobalt Drills Are Effective In Drilling Tough, High Tensile Strength Materials Like Stainless Steel, Inconel, And Titanium.
Features
- Set contains 29 m42 Cobalt Drill Bits sizes 1/16" - 1/2" x 1/64" increments
- Cobalt Drills are effective in drilling tough, high tensile strength materials like stainless steel, Inconel, and titanium
- Gold oxide finish acts as a lubricant and provides wear resistance
- Round shanks allow use with a wide variety of tool holding systems
- Manufactured to Aerospace Standard 907 and display high red hardness, permitting speeds up to 30% greater than with conventional M2 high speed steel
- Cobalt steel provides extended tool life compared to high-speed steel drill bits, and maintains the tool's toughness and hardness in high drilling temperatures
- Effortlessly grip the set in 1 hand as you would a travel coffee mug or leave it in the cup holder of your truck while on the way to a job
- When all hands are on deck, hang the drill index on your belt whether you're in the shop or field
- Unique round drill index combines form and function into 1 beautifully designed, easy to carry drill set
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 2.20 pounds
See On Amazon #18
Drill America 5/8" Bridge/Construction Reamer with 1/2" Shank, DWR Series
Asin: B00FXJGTO4 | Model: DWRRBSS5/8 | PartNumber: DWRRBSS5/8 | Ean: 0887861150637 | UPC: 887861150637
Point Is Tapered To Permit Entry Into Overlapping Holes.
High Speed Steel For Use In A Wide Range Of Materials Such As Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Metal, Nickel, Plastic, Steel.
Short Length Facilitates Use In Areas With Limited Access With Three Symmetrically Placed Flats On Shank Provide Positive Grip In Portable Electric And Pneumatic Tools..
Bridge Reamers Are Used To Align Existing Holes Prior To Bolt Or Rivet Installation.
Features
- Bridge Reamers are also called Construction Reamers
- Bridge reamers are used to align existing holes prior to bolt or rivet installation
- Point is tapered to permit entry into overlapping holes
- Short length facilitates use in areas with limited access with three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools.
- High speed steel for use in a wide range of materials such as Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Metal, Nickel, Plastic, Steel
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #19
Drill America - DWDCO7/8 7/8" Reduced Shank Cobalt Drill Bit with 1/2" Shank, DWDCO Series
Asin: B00FXHF1EA | Model: DWDCO7/8 | PartNumber: DWDCO7/8 | Ean: 0887861042147 | UPC: 887861042147
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to National Aerospace standard 907
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 4.00 x 6.00 x 4.00 inches | Weight: 0.10 pounds
See On Amazon #20
Drill America - DWT54728 1/2"-13 UNC High Speed Steel Bottoming Tap, (Pack of 1)
Asin: B00DL7DNGC | Model: DWT54728 | PartNumber: DWT54728 | Ean: 0887861071062 | UPC: 887861071062
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon
Looking For Something Else?
Search