Drill America - DWTET8X3/8-16 3/8"-16 x 8" High Speed Steel Pulley Tap, DWT Series
Asin: B00FXKBLJ6 | Model: DWTET8X3/8-16 | PartNumber: DWTET8X3/8-16 | Ean: 0887861079914 | UPC: 887861079914
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications..
Right-Hand Cut Tools Have A Cutting Action That Engages When They Are Run In A Clockwise Direction..
Round With Square End Shank..
High-Speed Steel Tools Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance..
Features
- Extension tap is used for tapping the hubs of pulleys for oil caps or set screws. The long shank is also ideal for reaching holes inaccessible with standard length taps.
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
- Round with square end shank.
- Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon Similar To Drill America DWTET8X3 816 3
#1
Drill America - DWDDL8X3/8 3/8" x 8" High Speed Steel Extra Long Drill Bit, DWDDL Series
Asin: B00FXHOIN0 | Model: DWDDL8X3/8 | PartNumber: DWDDL8X3/8 | Ean: 0887861060592 | UPC: 887861060592
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #2
Topline Cutting Tools No. 3 Drill Bits Cobalt M42 2-Pk
Asin: B07CZQ9335 | Model: 504-203 | PartNumber: 504-203 | Ean: 0811898030020 | UPC: 811898030020
Brand: TopLine Cutting Tools | Manufacturer: TopLine Cutting Tools
Weight: 0.03 pounds
See On Amazon #3
Drill America DWDN3P12 #3 High Speed Steel Black Oxide Drill Bit (Pack of 12), DWDN Series
Asin: B00FXI5FRW | Model: DWDN3P12 | PartNumber: DWDN3P12 | Ean: 0887861191524 | UPC: 887861191524
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Production, Maintenance Or Portable Drilling Jobs.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for production, maintenance or portable drilling jobs
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #4
MAXTOOL No.3 5pcs Identical Jobber Length Drills Dia 0.213" HSS M2 Twist Drill Bits Wire Gauge Gage Numbered Straight Shank Drills; JBN02H10R03P5
Asin: B085GLKQX6 | Model: JBN02H10R03P5 | PartNumber: JBN02H10R03P5 | Ean: 0634301941863 | UPC: 634301941863
Fully Ground Process Ensures Excellent Chips Moving, And 135 Deg Chisel Angle With Split Point Provide Accuracy Start For Quick Penetration Without Walking And Less Logging.
Jobber Length Twist Drill Bits With Straight Shank For Cutting Metal, Plastic, And Wood Etc; No. 1 To No. 60 Are Available.
Precision Treatment Makes Drills Durable Toughness, Withstands Heavy Duty Operation, Resists Corrosion And Lubricates The Drill Bits Better For Cutting Smoothly.
All Drill Dimensional & Tolerances Conform To Asme/Ansi B94.11M Drill Standards Or Uscti - United States Cutting Tool Institute (Formerly Mcti).
Features
- Quality high speed steel ensures the bits super hard, sharp and cutting effectively with impressive cutting performance in metal, plastic, and wood etc with long tool life
- All drill dimensional & tolerances conform to ASME/ANSI B94.11M drill standards or USCTI - United States Cutting Tool Institute (formerly MCTI)
- Fully ground process ensures excellent chips moving, and 135 deg chisel angle with split point provide accuracy start for quick penetration without Walking and less Logging
- Precision treatment makes drills durable toughness, withstands heavy duty operation, resists corrosion and lubricates the drill bits better for cutting smoothly
- Jobber Length Twist Drill Bits with Straight Shank for cutting metal, plastic, and wood etc; No. 1 to No. 60 are available
- See more on Amazon...
Brand: MaxTool | Manufacturer: TianShun Tool
Dimensions: 0.22 x 3.80 x 0.22 inches | Weight: 136.00 Grams
See On Amazon #5
MAXTOOL No.3 5pcs Identical Jobber Length Drills Dia 0.213" HSS M35 Cobalt Twist Drill Bits Wire Gauge Numbered Golden Straight Drills; JBN35G10R03P5
Asin: B09DF78W1F | Model: JBN35G10R03P5 | PartNumber: JBN35G10R03P5 | Ean: 0634301955594 | UPC: 634301955594
Fully Ground Process Ensures Excellent Chips Moving, And 135 Deg Chisel Angle With Split Point Provide Accuracy Start For Quick Penetration Without Walking And Less Logging.
Jobber Length Twist Drill Bits With Straight Shank For Cutting Metal, Plastic, And Wood Etc; No. 1 To No. 60 Are Available.
Precision Treatment Makes Drills Durable Toughness, Withstands Heavy Duty Operation, Resists Corrosion And Lubricates The Drill Bits Better For Cutting Smoothly.
All Drill Dimensional & Tolerances Conform To Asme/Ansi B94.11M Drill Standards Or Uscti - United States Cutting Tool Institute (Formerly Mcti).
Features
- Cobalt high speed steel ensures the bits super hard, sharp and cutting effectively with impressive performance in cutting metal, plastic, and wood etc with long tool life
- All drill dimensional & tolerances conform to ASME/ANSI B94.11M drill standards or USCTI - United States Cutting Tool Institute (formerly MCTI)
- Fully ground process ensures excellent chips moving, and 135 deg chisel angle with split point provide accuracy start for quick penetration without Walking and less Logging
- Precision treatment makes drills durable toughness, withstands heavy duty operation, resists corrosion and lubricates the drill bits better for cutting smoothly
- Jobber Length Twist Drill Bits with Straight Shank for cutting metal, plastic, and wood etc; No. 1 to No. 60 are available
- See more on Amazon...
Brand: MaxTool | Manufacturer: TianShun Tool
Dimensions: 0.22 x 3.80 x 0.22 inches
See On Amazon #6
Drill America #3 Solid Carbide Drill Bit, DMOD Series
Asin: B00B4VKBQ2 | Model: DMOD3 | PartNumber: DMOD3 | Ean: 0887861046558 | UPC: 887861046558
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to National Aerospace Standard 907
- See more on Amazon...
First Available: 12/12/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #7
Drill America - DWC5-530-333 1" X 3" High Speed Steel Annular Cutter, DWC Series
Asin: B00FXF15LA | Model: DWC5-530-333 | PartNumber: DWC5-530-333 | Ean: 0887861000802 | UPC: 887861000802
High-Speed Steel Tools Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
For Use With Magnetic Drill Press Only. Do Not Use With A Standard Hand Drill Or Drill Press.
Pilot Pin Included..
3/4" Weldon Shank Features A Round Shank With One Of More Flats Machined Into The Side For Easy Indexing And Alignment. Fits Most Magnetic Drill Presses..
Features
- Annular cutters are designed for fast, efficient hole making and cut only that material necessary to produce a quality hole.
- 3/4 Weldon shank features a round shank with one of more flats machined into the side for easy indexing and alignment. Fits most magnetic drill presses.
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Pilot pin included.
- For use with magnetic drill press only. Do not use with a standard hand drill or drill press
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #8
Drill America DWTH3-18 3"OD HSS Round Die, 1"-8
Asin: B01BQLP3PS | Model: DWTH3-18 | PartNumber: DWTH3-18 | Ean: 0887861102209 | UPC: 887861102209
For Use In Making New Threads Or Re-Threading Existing Threads.
Country Of Origin: United States.
Bright Finish.
Features
- Round die
- Bright finish
- For use in making new threads or re-threading existing threads
- Country of origin: United States
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Weight: 0.99 pounds
See On Amazon #9
Drill America 3-5/8" Bi-Metal Hole Saw, DMS9 Series
Asin: B00FXDY9SI | Model: DMS04-1092 | PartNumber: DMS04-1092 | Ean: 0887861175876, 0887861230865 | UPC: 887861175876, 887861230865
Supports Heavy Duty Cutting With Its Rugged Constitution, Which Is Constructed On Tough Metal.
It Cuts Faster, Smoother Without As Much Vibration As The Others Due To Its Variable Pitch Teeth.
It Needs Just One Pass To Cut Through Studs.
Can Be Used In A Wide Variety Of Applications.
Features
- Variable pitch teeth allow for cutting thru any wood, metal or plastic
- Can be used in a wide variety of applications
- Supports heavy duty cutting with its rugged constitution, which is constructed on tough metal
- It needs just one pass to cut through studs
- It cuts faster, smoother without as much vibration as the others due to its variable pitch teeth
- See more on Amazon...
First Available: 03/12/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon
Looking For Something Else?
Search