Hillman 886 Axle Pushnut Fastener 5/16 in. 16-Pack
Asin: B00HYK6OJU | Model: 886 | PartNumber: 886 | Ean: 0008236004014 | UPC: 008236004014
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Permanent Placement.
Country Of Origin: United States.
Quick And Easy Installation.
Features
- Axle nut style
- Quick and easy installation
- Permanent placement
- Country of Origin: United States
- See more on Amazon...
Brand: Hillman | Manufacturer: The Hillman Group
Dimensions: 1.30 x 2.40 x 1.50 inches
See On Amazon Similar To Hillman 886 Axle Pushnut Fastener
#1
(8 Pack) Hard-to-Find Spring Steel Push-On Pushnuts - Dolly Wheel Lock Washers Fits 5/8" Dolly Axle Rods with Oiled Phosphate Finish
Asin: B08PP5CB2B | Model: 5/8 | PartNumber: 5/8
Dolly Wheel Lock Washers Fits 5/8" Dolly Axle Rods - With An Outer Diameter Of 1 Inch, These Pushnuts Can Fit Unthreaded 5/8-Inch Dolly Axle Rods Snugly. It Has A Diameter Tolerance Of About .002 Inches For Maximum Holding Strength..
Best Value 8-Pack Dolly Wheel Lock Washers - Are You Frustrated About Searching For Hard-To-Find Parts? Single-Use Pushnuts? There's No Turning Back Once You've Already Removed Them. Thankfully, This 8-Pack Variation Will Provide You A Supply Of Pushnuts That's Enough To Last One Dolly's Lifespan..
Oiled Phosphate Finish - Phosphate Coatings Prevent Corrosion On Steel Parts. It Has A Strong Surface Adhesion, Preventing Wear And Improving Friction-Induced Wear. The Oil On The Pushnuts' Phosphate Coating Serves As A Sealer To Ensure The Effectiveness Of The Phosphate's Corrosion-Resistant Properties..
Perfect Alternative For Pins And Washers - Same Function But One Is More Efficient. These Pushnuts Have Teeth That Slide Into The Stud With A Ratcheting Action, Only Allowing The Pushnuts To Move In One Direction And Resist Moving To The Opposite Direction..
Features
- HIGH-QUALITY SPRING STEEL PUSH-ON PUSHNUTS FOR LOW TORQUE APPLICATIONS - These pushnuts may not look that much with their .02-inch thickness and simple design but they are one of the most efficient ways to keep wheels in place for low-torque outdoor equipment like dollies, hand carts, and lawn wagons.
- PERFECT ALTERNATIVE FOR PINS AND WASHERS - Same function but one is more efficient. These pushnuts have teeth that slide into the stud with a ratcheting action, only allowing the pushnuts to move in one direction and resist moving to the opposite direction.
- DOLLY WHEEL LOCK WASHERS FITS 5/8 DOLLY AXLE RODS - With an outer diameter of 1 inch, these pushnuts can fit unthreaded 5/8-inch dolly axle rods snugly. It has a diameter tolerance of about .002 inches for maximum holding strength.
- OILED PHOSPHATE FINISH - Phosphate coatings prevent corrosion on steel parts. It has a strong surface adhesion, preventing wear and improving friction-induced wear. The oil on the pushnuts' phosphate coating serves as a sealer to ensure the effectiveness of the phosphate's corrosion-resistant properties.
- BEST VALUE 8-PACK DOLLY WHEEL LOCK WASHERS - Are you frustrated about searching for hard-to-find parts? Single-use pushnuts? There's no turning back once you've already removed them. Thankfully, this 8-pack variation will provide you a supply of pushnuts that's enough to last one dolly's lifespan.
- See more on Amazon...
Brand: AR-PRO | Manufacturer: AR-PRO
Dimensions: 0.98 x 0.00 x 0.00 inches | Weight: 0.00 Pounds
See On Amazon #2
Push-On Pushnut, Stud Size 5/8, Phosphate + Oil, 2-Piece
Asin: B0789WN997 | Ean: 7426853309757
Brand: Just in Time | Manufacturer: Just in Time
Dimensions: 0.06 x 1.00 x 1.00 inches | Weight: 0.00 Pounds
See On Amazon #3
Push on Pushnut Cap Stud Size 5/8, Zinc Mech Finish, 2-Piece
Asin: B079ZN8TRJ | Model: PNCAP0508 | PartNumber: PNCAP0508 | Ean: 7426853309788
Brand: Just in Time | Manufacturer: JIT
Dimensions: 0.41 x 1.19 x 1.19 inches | Weight: 0.01 pounds
See On Amazon #4
Calvana (4-Pack) Spring Steel Push On Pushnut Caps with Mechanical Zinc Plating-Permanent Washer Caps Fits 1/2 Axles for Hand Trucks, Rolling Bins, and Lawn Wagons-Perfect Alternative for Cotter Pins
Asin: B0B9H4YJ6Z | Ean: 0704260427200 | UPC: 704260427200
Permanent Washer Caps Fits 1/2” Axles For Hand Trucks, Rolling Bins, And Lawn Wagons - These Pushnuts Are Perfect For Both Commercial And Household Wheeled Equipment. Unsure If These Pushnuts Will Fit Your Equipment’S Axle Shaft? These Pushnuts Have An Outer Diameter Of 0.63 Inch, An Inner Diameter Of 0.5 Inch, An Overall Height Of 0.335 Inch, 0.055 Inch Cap Bottom Thickness, And 0.803 Inches Overall Diameter..
Super Value 4-Pack Dolly Push Nuts - For A Wallet-Friendly Price, You’Ll Get 4 Pushnuts You Can Use On All 4 Wheels Of Your Hand Cart, Lawn Wagon, Wheeled Garbage Bin, Pressure Washer Cart, And More! Whether You Are Replacing Your Wheels Or Converting To Push Nut Caps From Cotter Pins, Our Pack Of 4 Pushnuts Will Be Perfect For You!.
Mechanical Zinc Plating For Corrosion Protection - With A Minimum Finish Of 0.0003 Inches, Mechanical Zinc Plating Offers An Even Coating And Reliable Adhesion For Optimum Corrosion And Hydrogen Embrittlement Resistance..
Mechanical Zinc Plating For Corrosion Protection - With A Minimum Finish Of 0.0003 Inches, Mechanical Zinc Plating Offers An Even Coating And Reliable Adhesion For Optimum Corrosion And Hydrogen Embrittlement Resistance..
Features
- SPRING STEEL PUSH ON PUSHNUT CAPS - As a general-use steel, spring steel offers high reliability and durability. With its high yield strength and resilience, spring steel is an excellent material for pushnuts used on low-torque applications. And with their efficient design, these pushnuts can provide optimum wheel retention and vibration resistance.
- MECHANICAL ZINC PLATING FOR CORROSION PROTECTION - With a minimum finish of 0.0003 inches, mechanical zinc plating offers an even coating and reliable adhesion for optimum corrosion and hydrogen embrittlement resistance.
- PERMANENT WASHER CAPS FITS 1/2 AXLES FOR HAND TRUCKS, ROLLING BINS, AND LAWN WAGONS - These pushnuts are perfect for both commercial and household wheeled equipment. Unsure if these pushnuts will fit your equipment s axle shaft? These pushnuts have an outer diameter of 0.63 inch, an inner diameter of 0.5 inch, an overall height of 0.335 inch, 0.055 inch cap bottom thickness, and 0.803 inches overall diameter.
- MECHANICAL ZINC PLATING FOR CORROSION PROTECTION - With a minimum finish of 0.0003 inches, mechanical zinc plating offers an even coating and reliable adhesion for optimum corrosion and hydrogen embrittlement resistance.
- SUPER VALUE 4-PACK DOLLY PUSH NUTS - For a wallet-friendly price, you ll get 4 pushnuts you can use on all 4 wheels of your hand cart, lawn wagon, wheeled garbage bin, pressure washer cart, and more! Whether you are replacing your wheels or converting to push nut caps from cotter pins, our pack of 4 pushnuts will be perfect for you!
- See more on Amazon...
Brand: Calvana | Manufacturer: Calvana
See On Amazon #5
1/2" Push On Cap Nut - 1/2 inch Axle Cap Nut - Push On Cap Nuts - Axle Caps 1/2" - Wheel Retainers (4)
Asin: B082P236R2 | Ean: 0663140972240 | UPC: 663140972240
Commonly Used On Miscellaneous Household Items That Feature Axles Such As Lawn Carts, Hand Trucks, Rolling Garbage Cans, Etc.
Contains 4 Pieces.
These Push Nut Caps Have No Screw Thread But Have An Inward Facing Flange. The Flange Is Meant For Quick Assembly. Tap On With A Hammer To Secure Wheels And Washers Onto A Shaft Or Rod Axle.
Zinc Plating Offers Moderate Corrosion Resistance.
Features
- These cap nuts are fits to push into place on a 1/2" diameter shafts/axles
- Zinc plating offers moderate corrosion resistance
- Commonly used on miscellaneous household items that feature axles such as lawn carts, hand trucks, rolling garbage cans, etc
- These push nut caps have no screw thread but have an inward facing flange. The flange is meant for quick assembly. Tap on with a hammer to secure wheels and washers onto a shaft or rod axle
- Contains 4 pieces
- See more on Amazon...
Brand: Magic Hub | Manufacturer: Imported
See On Amazon #6
Ruipaba 265PCS(9 Size) Push Nuts Internal Tooth Starlock Washers Push On Locking Washers Speed Clips Fasteners Assortment Kit P-046-kit
Asin: B0BMKQQRLJ | Model: P-046-kit | PartNumber: P-046-kit
Packing: 265Pcs Contains 9 Sizes: M2,M2.5,M3,M4,M5,M6,M8,M10,M12, And Is Equipped With A Transparent Storage Box For Easy Storage..
Tips: Internal Tooth Starlock Washers Are Of Fine Workmanship. If You Have Any Problems In Use, Please Contact Us In Time, And We Will Deal With Them As Soon As Possible..
Uses:Internal Tooth Starlock Washers Used For Shock Absorption And Insulation Of Mechanical Equipment, Furniture, Electrical Appliances, Automobiles And Industrial Production..
Features:The Star Locking Washer With Internal Teeth Adds A Spring Force Between The Fastener And The Base Plate, Which Will Produce Greater Friction And Rotation Resistance..
Features
- Material:Internal tooth starlock washers made of 65Mn steel, it is very strong
- Features:The star locking washer with internal teeth adds a spring force between the fastener and the base plate, which will produce greater friction and rotation resistance.
- Packing: 265pcs contains 9 sizes: M2,M2.5,M3,M4,M5,M6,M8,M10,M12, and is equipped with a transparent storage box for easy storage.
- Uses:Internal tooth starlock washers used for shock absorption and insulation of mechanical equipment, furniture, electrical appliances, automobiles and industrial production.
- Tips: Internal tooth starlock washers are of fine workmanship. If you have any problems in use, please contact us in time, and we will deal with them as soon as possible.
- See more on Amazon...
Brand: Ruibapa | Manufacturer: Ruibapa
See On Amazon #7
MCMASKE 300PCS Metric M3 M4 M5 M6 M8 M10 M12 Stainless Steel Internal Tooth Starlock Washers Assortment Kit;External Push Rings; Push On Washers;Push Nuts for Unthreaded Shafts
Asin: B0B219S4FW | Model: ZCJM3-12-300 | PartNumber: ZCJM3-12-300
Starlock Washer;External Push Rings; Push On Washers;Speed Clips;Push Nuts For Unthreaded Shafts.
All Contained In A Compact And See Through Compartmented Plastic Box.100% New,Perfect Accessories Of Shock Absorption For Machinery Equipment.Easy To Install And Durable To Use.
Widely Used In Machinery Equipment, Industrial Production Of Shock Absorption ,Bearings, Machinery Etc.
Material:304 Stainless Steel;304 Stainless Steel Have Good Chemical Resistance And May Be Mildly Magnetic.
Features
- High Quality 7 Sizes Metric M3 M4 M5 M6 M8 M10 M12 Stainless Steel Starlock Push on Washers Assortment Kit Total 300Pieces
- Material:304 stainless steel;304 stainless steel have good chemical resistance and may be mildly magnetic
- Starlock Washer;External Push Rings; Push On Washers;Speed Clips;Push Nuts for Unthreaded Shafts
- Widely used in machinery equipment, industrial production of shock absorption ,bearings, machinery etc
- All contained in a compact and see through compartmented plastic Box.100% new,Perfect accessories of shock absorption for machinery equipment.Easy to install and durable to use
- See more on Amazon...
Brand: MCMASKE | Manufacturer: MCMASKE
See On Amazon #8
SpzcdZa 260pcs 7 Size Internal Tooth Starlock Washers Locking Washer Assortment Kit, Push On Speed Clips Fasteners Assortment Kit,Quick Speed Locking Washers,Black Oxide Finish65Mn Black Oxide Finish
Asin: B07MHC5GHS | Model: SD181231100 | PartNumber: SD181231100 | Ean: 0613852276716 | UPC: 613852276716
➤【Type】: High Quality Internal Tooth Starlock Washers Kit.
➤【Feature】: A Lock Washer Exerts A Spring Force Between The Fasteners Head And The Substrate To Create More Friction And Resistance To Rotation.
➤【Wide Application】: Widely Used In Machinery Equipment, Industrial Production Of Shock Absorption And Insulation,Can Meet Your Different Needs In Daily Life.
➤【 Material 】: High Quality 65Mn Metal Steel, Anti-Corrosion And Durable.
Features
- Set Include : 7 size of M3 M4 M5 M6 M8 M10 M12 total 260pcs in a transparent box, applicable to different sizes of fasteners
- Material : High Quality 65Mn metal steel, anti-corrosion and durable
- Type : High Quality Internal Tooth Starlock Washers Kit
- Wide Application : Widely used in machinery equipment, industrial production of shock absorption and insulation,can meet your different needs in daily life
- Feature : A Lock washer exerts a spring force between the fasteners head and the substrate to create more friction and resistance to rotation
- See more on Amazon...
Brand: SpzcdZa | Manufacturer: SpzcdZa
See On Amazon #9
Prime-Line 9078486 Axle Hat Push Nuts, 1/4 In., Zinc Plated Steel (20 Pack)
Asin: B074ZMYZZZ | Model: 9078486 | PartNumber: 9078486 | Ean: 0049793126054 | UPC: 049793126054
Can Be Tapped Into Place Using A Hammer Or Mallet.
Often Used To Hold Wheels On Hand Trucks And Other Equipment.
Contact Points On The Inside Of The Nut Bite Into The Shaft To Secure It In Place.
Used To Cap Axles And Exposed Ends Of Rods, Shafts Or Studs.
Features
- Size: 1/4 inch
- Used to cap axles and exposed ends of rods, shafts or studs
- Can be tapped into place using a hammer or mallet
- Contact points on the inside of the nut bite into the shaft to secure it in place
- Often used to hold wheels on hand trucks and other equipment
- See more on Amazon...
Brand: PRIME-LINE | Manufacturer: Prime-Line
Dimensions: 1.00 x 4.00 x 4.00 Inches
See On Amazon #10
HanTof 7 Sizes 320PCS Internal Tooth Starlock Washers,Quick Speed Locking Washers, Push On Retainers Clips,Push On Nut Fasteners Assortment Kit for Shaft and Stud,65Mn Spring Steel,Black Oxide Finish
Asin: B07Q2LMD2K | Ean: 0616899971415 | UPC: 616899971415
Made Of 65Mn Metal Steel, Black Oxide Finish Anti-Corrosion And Durable.
No Groove Required—Press These Rings Onto The End Of A Shaft. Use Them On Unhardened Shafts That Are Softer Than The Push Ring. The Ring Bites Into The Metal To Form An Interference Grip. Have Teeth That Dig Into The Shaft Material, So Expect Minor Scratching. Use A Push Nut Installation Tool To Install Rings, Or Install Them Manually..
Wide Application: Used In Machinery Equipment, Industrial Production Of Shock Absorption And Insulation, Can Meet Your Different Needs In Daily Life.
Set Includes 7 Most Used Sizes: M3 M4 M5 M6 M8 M10 M12,320Pcs In Box.
Features
- High Quality Internal Tooth Starlock Washers Kit
- Set Includes 7 Most Used Sizes: M3 M4 M5 M6 M8 M10 M12,320pcs in box
- Made of 65Mn metal steel, black oxide finish Anti-corrosion and durable
- Wide Application: used in machinery equipment, industrial production of shock absorption and insulation, can meet your different needs in daily life
- No groove required press these rings onto the end of a shaft. Use them on unhardened shafts that are softer than the push ring. The ring bites into the metal to form an interference grip. have teeth that dig into the shaft material, so expect minor scratching. Use a push nut installation tool to install rings, or install them manually.
- See more on Amazon...
Brand: HanTof | Manufacturer: HanTof
See On Amazon #11
MARRTEUM 2 Piece Spring Steel Push on Pushnut Cap Stud 5/8 Inch Axle Pushnut Fastener with Zinc Mech Finish for Rolling Bins, Lawn Wagons and Hand Trucks
Asin: B0BXWDLW2F | Model: PUSHER-COVER-58-2P | PartNumber: PUSHER-COVER-58-2P
【Dimensions】2Pcs 5/8 Inch Shaft Cap Nuts, Inner Diameter Is 0.625 Inch/15.87 Mm, Outer Diameter Is 0.76 Inch/19.30 Mm, Overall Height Is 0.43 Inch/10.92 Mm, Cap Bottom Thickness Is 0.06 Inch/1.52 Mm, Overall Diameter Is 1.17 Inch/29.72 Mm..
【Application】The Push On Pushnut Cap Stud Commonly Used On Hand Cart, Wheeled Garbage Bin, Pressure Washer Cart And Lawn Wagon To Cover The Exposed Ends Of Shafts, Rods And Studs..
【Easy To Install】Dolly Push Nut Is Easy To Install, Without The Use Of Specific Tools, Push-In Installation..
【Quality Material】The Shaft Push Nut Fasteners Are Made Of Spring Steel, Sturdy And Reliable, With Smooth And Burr-Free Surface. Zinc-Plated To Provide Good Corrosion Resistance And Hydrogen Embrittlement Resistance..
Features
- Best Alternative to Cotter Pins Cotter pins are made of soft metal, but are prone to distortion and breakage. The pushrod cap studs hold their shape well and are sturdy and reliable and are perfect replacements for cotter pins where they fail. There is no need to drill holes in the axle like cotter pins, and the inner contact point bites into the shaft to secure it in place.
- Quality Material The shaft push nut fasteners are made of spring steel, sturdy and reliable, with smooth and burr-free surface. Zinc-plated to provide good corrosion resistance and hydrogen embrittlement resistance.
- Dimensions 2pcs 5/8 inch shaft cap nuts, inner diameter is 0.625 inch/15.87 mm, outer diameter is 0.76 inch/19.30 mm, overall height is 0.43 inch/10.92 mm, cap bottom thickness is 0.06 inch/1.52 mm, overall diameter is 1.17 inch/29.72 mm.
- Easy to Install Dolly push nut is easy to install, without the use of specific tools, push-in installation.
- Application The push on pushnut cap stud commonly used on hand cart, wheeled garbage bin, pressure washer cart and lawn wagon to cover the exposed ends of shafts, rods and studs.
- See more on Amazon...
Brand: MARRTEUM | Manufacturer: MARRTEUM
Dimensions: 0.43 x 1.17 x 1.17 Inches | Weight: 0.01 pounds
See On Amazon #12
Alamic Push on Pushnut Cap Stud 1/2 Inch Axle Cap Nut Zinc Mech Finish for Hand Trucks, Rolling Bins, and Lawn Wagons - 6 Pack
Asin: B0CH7XN1WX
Commonly Used On Miscellaneous Household Items That Feature Axles Such As Lawn Carts, Hand Trucks, Rolling Garbage Cans, Etc..
Used To Cap Axles And Exposed Ends Of Rods, Shafts Or Studs..
Easy To Install With A Couple Taps With A Hammer..
Made Of Spring Steel, Sturdy And Durable. Zinc-Plated Which Offer An Even Coating And Reliable Adhesion For Optimum Corrosion And Hydrogen Embrittlement Resistance..
Features
- These cap nuts fit 1/2 inch diameter axle.
- Made of spring steel, sturdy and durable. Zinc-plated which offer an even coating and reliable adhesion for optimum corrosion and hydrogen embrittlement resistance.
- Commonly used on miscellaneous household items that feature axles such as lawn carts, hand trucks, rolling garbage cans, etc.
- Easy to install with a couple taps with a hammer.
- Used to cap axles and exposed ends of rods, shafts or studs.
- See more on Amazon...
Brand: Alamic | Manufacturer: Alamic
See On Amazon #13
Agri-Fab 44663 Nut, 1/2-Inch Push
Asin: B00FMXIO94 | Model: 44663 | PartNumber: 44663 | Ean: 0052613105290 | UPC: 052613105290
Consult Your User Manual For Parts Blow-Out Diagram.
No Assembly Required.
Authentic Agri-Fab Parts.
Features
- Agri-Fab Parts Are The Highest Quality
- Authentic Agri-Fab Parts
- Consult Your User Manual For Parts Blow-Out Diagram
- No Assembly Required
- See more on Amazon...
Brand: Agri-Fab | Manufacturer: Agri-Fab - Replacement Parts
Dimensions: 1.00 x 1.00 x 1.00 Inches | Weight: 0.13 Pounds
See On Amazon #14
Hard-to-Find Fastener 014973325787 Washer Cap Push Nuts, 5/8, Piece-8
Asin: B004IRGC44 | Model: 014973325787 | PartNumber: 014973325787 | Ean: 0738287659757, 0014973325787 | UPC: 738287659757, 014973325787
Finish: Zinc.
Type: Push Nut.
Style: Washer Cap.
Material: Steel.
Brand: Hard-to-Find Fastener | Manufacturer: Hard-to-Find Fastener
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.07 Pounds
See On Amazon #15
Hillman 887 Axle Pushnut Fastener 3/8 in. 20-Pack, Zinc
Asin: B00HYK6OF4 | Model: 887 | PartNumber: 887 | Ean: 0008236004021 | UPC: 008236004021
Included Parts Are Zinc-Plated For Improved Corrosion Resistance.
Package Dimensions : 1.4" L X 1.6" W X 2.5" H.
Push Nuts Are Designed To Offer Simple, Tool-Free, Push-In Installation.
Features
- Push nuts are designed for permanent placement without the use of specific removal tools
- Push nuts are designed to offer simple, tool-free, push-in installation
- Included parts are zinc-plated for improved corrosion resistance
- Package Dimensions : 1.4 L x 1.6 W x 2.5 H
- See more on Amazon...
Brand: Hillman | Manufacturer: The Hillman Group
Dimensions: 2.50 x 1.40 x 1.60 Inches
See On Amazon #16
Prime-Line 9078467 Axle Hat Push Nuts, 3/16 In., Zinc Plated Steel (20 Pack)
Asin: B074ZZ2KC7 | Model: 9078467 | PartNumber: 9078467 | Ean: 0049793134981 | UPC: 049793134981
Can Be Tapped Into Place Using A Hammer Or Mallet.
Often Used To Hold Wheels On Hand Trucks And Other Equipment.
Contact Points On The Inside Of The Nut Bite Into The Shaft To Secure It In Place.
Used To Cap Axles And Exposed Ends Of Rods, Shafts Or Studs.
Features
- Size: 3/16 inch
- Used to cap axles and exposed ends of rods, shafts or studs
- Can be tapped into place using a hammer or mallet
- Contact points on the inside of the nut bite into the shaft to secure it in place
- Often used to hold wheels on hand trucks and other equipment
- See more on Amazon...
Brand: PRIME-LINE | Manufacturer: Prime-Line
Dimensions: 1.00 x 4.00 x 4.00 inches
See On Amazon #17
Retro-Motive Body Bolts & U-nut Clips- 5/16" x 1-3/16" Long- 1/2" Hex- 10 Pieces Each- #2108
Asin: B07FC1G6WK | Ean: 7426853815975
Manufacturer Part Number: 2108; Other Part Number:1836/1930.
Features
- Brand:Retro-Motive, Surface Finish: Black
- Manufacturer Part Number: 2108; Other Part Number:1836/1930
- See more on Amazon...
Brand: Retro-Motive | Manufacturer: Retro-Motive
Dimensions: 2.00 x 5.00 x 5.00 inches
See On Amazon #18
Hillman 889 Axle Pushnut Fastener 1/2 in. 12-Pack, Zinc
Asin: B00HYK6ORM | Model: 889 | PartNumber: 889 | Ean: 0008236004045 | UPC: 008236004045
Included Parts Are Zinc-Plated For Improved Corrosion Resistance.
Package Dimensions : 2.4" L X 1.4" W X 1.6" H.
Push Nuts Are Designed To Offer Simple, Tool-Free, Push-In Installation.
Features
- Push nuts are designed for permanent placement without the use of specific removal tools
- Push nuts are designed to offer simple, tool-free, push-in installation
- Included parts are zinc-plated for improved corrosion resistance
- Package Dimensions : 2.4 L x 1.4 W x 1.6 H
- See more on Amazon...
Brand: Hillman | Manufacturer: The Hillman Group
Dimensions: 1.60 x 2.40 x 1.40 Inches
See On Amazon #19
HELIFOUNER 320 Pieces 7 Sizes Internal Tooth Star Lock Washers, Quick Speed Locking Washers, Push Nuts, Speed Clips Retaining Clips Fasteners Assortment Kit
Asin: B0BD551NJ8 | Model: HELIFOUNER-Tooth-Lock-Washers | PartNumber: HELIFOUNER-Tooth-Lock-Washers | Ean: 0749355454198 | UPC: 749355454198
【Function】Internal Tooth Star Lock Washers Provide Spring Force, Grip Sturdy, Create More Friction And Resistance To Rotation Between The Fasteners Head And The Substrate, Which Maintains The Washer Hard Against The Substrate And The Bolt Thread Hard Against The Nut Or Substrate Thread, Creating More Friction And Resistance To Rotation..
【Package】320 Pieces 7 Sizes In Total, Packed In A Durable Transparent Box With Label. It Is Easy To Distinguish The Size Of The Product, When You Want To Use A Certain Internal Tooth Star Lock Washer, You Don't Have To Waste Time Buying It Separately, You Can Choose The Suitable One To Meet All Your Needs..
【Wide Applications】Widely Used In Machinery Equipment, Industrial Production Of Shock Absorption, Can Meet Your Different Needs In Daily Life. Whenever You Need Us, Please Free To Contact Us, We Will Give You A Professional Service And Reply You Within 24 Hours..
【Material】High Quality 65Mn Metal Steel Material Which Have Good Corrosion Resistance In Bad Environment Like High Temperature, Cold Weather, And High Humidity Areas. They Have Superior Rust Resistance And Excellent Oxidation Resistance, Which Can Ensure Long Time Using..
Features
- Sizes M3, M4, M5, M6, M8, M10, M12 internal tooth star lock washers, total 7 sizes 320 pieces in a transparent box, different sizes can meet your different needs. Perfect accessories of shock absorption for machinery equipment. Easy to install and durable to use
- Material High Quality 65Mn metal steel material which have good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas. They have superior rust resistance and excellent oxidation resistance, which can ensure long time using.
- Function Internal tooth star lock washers provide spring force, grip sturdy, create more friction and resistance to rotation between the fasteners head and the substrate, which maintains the washer hard against the substrate and the bolt thread hard against the nut or substrate thread, creating more friction and resistance to rotation.
- Wide Applications Widely used in machinery equipment, industrial production of shock absorption, can meet your different needs in daily life. Whenever you need us, please free to contact us, we will give you a professional service and reply you within 24 hours.
- Package 320 pieces 7 sizes in total, packed in a durable transparent box with label. It is easy to distinguish the size of the product, when you want to use a certain internal tooth star lock washer, you don't have to waste time buying it separately, you can choose the suitable one to meet all your needs.
- See more on Amazon...
Brand: HELIFOUNER | Manufacturer: HELIFOUNER
See On Amazon
Looking For Something Else?
Search