TEMO M35 Cobalt Spiral Flute Step Drill, 12 Size From 3/16 Inch To 7/8 Inch, 1/4 Inch Hex Shank
Asin: B00IQJXF5O | Model: 3051 | PartNumber: 3051 | Ean: 0723175193406 | UPC: 723175193406
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Double Spiral Flutes For More Efficient Swarf Clearance; 1/4 Inch Hex Shank With Quick Release Slot To Eliminate Slipping; Self-Starting For Clean Holes In Thin Materials; M35 Cobalt Hss To Cut Stainless Steel. The Step Drill Bit Is Made With M35 Cobalt. It Is Ideal For Variety Of Materials From Stainless Steel, Metal, Plastic, Fiberglass To Wood. They Also Help To Enlarge Existing Holes. M35 Hssco Is A High Speed Steel Alloy Made Up Of 5% Cobalt. M35 Is Similar To M2, But With 5% Cobalt Added..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
The Addition Of Cobalt Increases Heat Resistance. It Is Widely Used In Metal Manufacturing Because Of Its Ability To Resist Wear Over Conventional High Speed Steels, Allowing For Shorter Cycle Times In Production Environments Due To Higher Cutting Speeds Or From The Increase In Time Between Tool Changes. M35 Is Also Less Prone To Chipping When Used For Interrupted Cuts..
12 Hole Sizes: 3/16" (4.76Mm), 1/4" (6.35Mm), 5/16" (7.94Mm), 3/8" (9.52Mm), 7/16" (11.11Mm), 1/2" (12.7Mm), 9/16" (14.29Mm), 5/8" (15.88Mm), 11/16" (17.46Mm) , 3/4" (19.05Mm), 13/16" (4.76Mm), 7/8" (22.22Mm) With 1/16" (1.59Mm) Increments. The Size Marks Are Stamped Next To Each Step To Ease The Use..
Features
- M35 cobalt step drill 1/4" (6.35mm) hex shank 12 hole 3/16" (4.76mm) to 7/8" (22.22mm)
- 12 hole sizes: 3/16 (4.76mm), 1/4 (6.35mm), 5/16 (7.94mm), 3/8 (9.52mm), 7/16 (11.11mm), 1/2 (12.7mm), 9/16 (14.29mm), 5/8 (15.88mm), 11/16 (17.46mm) , 3/4 (19.05mm), 13/16 (4.76mm), 7/8 (22.22mm) with 1/16 (1.59mm) increments. The size marks are stamped next to each step to ease the use.
- double spiral flutes for more efficient swarf clearance; 1/4 Inch hex Shank with quick release slot to eliminate slipping; Self-starting for clean holes in thin materials; M35 cobalt HSS to cut stainless steel. The step drill bit is made with M35 cobalt. It is ideal for variety of materials from stainless steel, metal, plastic, fiberglass to wood. They also help to enlarge existing holes. M35 HSSCo is a high speed steel alloy made up of 5% cobalt. M35 is similar to M2, but with 5% cobalt added.
- The addition of cobalt increases heat resistance. It is widely used in metal manufacturing because of its ability to resist wear over conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M35 is also less prone to chipping when used for interrupted cuts.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 1.00 x 3.00 x 1.00 Inches | Weight: 0.00 pounds
See On Amazon Similar To TEMO M35 Cobalt Spiral Flute
#1
TEMO Black AITiN Coated M35 Cobalt Smooth Step Drill Spiral Flute, 6 Size from 3/16 Inch to 1/2 Inch, 1/4 Inch Hex Shank
Asin: B0CWTLXFGF | Ean: 0810091960899 | UPC: 810091960899
Double Spiral Flutes For More Efficient Swarf Clearance; 1/4 Inch Hex Shank With Quick Release Slot To Eliminate Slipping. The Addition Of Cobalt Increases Heat Resistance. It Is Widely Used In Metal Manufacturing Because Of Its Ability To Resist Wear Over Conventional High Speed Steels, Allowing For Shorter Cycle Times In Production Environments Due To Higher Cutting Speeds Or From The Increase In Time Between Tool Changes. M35 Is Also Less Prone To Chipping When Used For Interrupted Cuts..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Aluminum Titanium Nitride (Altin) Is Normally Applied To Steels, Hardened Steels, And Stainless Steel Materials Where High Wear Resistance And Lubricity Are Needed. Altin Coating Provides Exceptional Oxidation Resistance And Extreme Hardness. That's Why This Coating Works Well In Very Demanding Cutting Tool Applications, Especially When Tools Are Being Pushed To The Max..
6 Hole Sizes: 3/16" (4.76Mm), 1/4" (6.35Mm), 5/16" (7.94Mm), 3/8" (9.52Mm), 7/16" (11.11Mm), 1/2" (12.7Mm), With 1/16" (1.59Mm) Increments. The Size Marks Are Stamped Next To Each Step To Ease The Use..
Features
- Black AITiN Coated M35 Cobalt Smooth Step Drill Spiral Flute, 6 Size From 3/16 Inch To 1/2 Inch, 1/4 Inch Hex Shank
- 6 hole sizes: 3/16 (4.76mm), 1/4 (6.35mm), 5/16 (7.94mm), 3/8 (9.52mm), 7/16 (11.11mm), 1/2 (12.7mm), with 1/16 (1.59mm) increments. The size marks are stamped next to each step to ease the use.
- Double spiral flutes for more efficient swarf clearance; 1/4 Inch hex Shank with quick release slot to eliminate slipping. The addition of cobalt increases heat resistance. It is widely used in metal manufacturing because of its ability to resist wear over conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M35 is also less prone to chipping when used for interrupted cuts.
- Aluminum Titanium Nitride (AlTiN) is normally applied to steels, hardened steels, and stainless steel materials where high wear resistance and lubricity are needed. AlTiN coating provides exceptional oxidation resistance and extreme hardness. That's why this coating works well in very demanding cutting tool applications, especially when tools are being pushed to the max.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 1.25 x 4.25 x 1.25 Inches | Weight: 0.13 pounds
See On Amazon #2
Amana Tool 51477-Z SC Spiral O Single Flute ZrN Coated Aluminum Cutting 3/16 D x 3/8 CH x 1/4 SHK x 2 Inch Long Up-Cut ?Router Bit with Mirror Finish
Asin: B07P8T69JC | Ean: 0738685774519 | UPC: 738685774519
Specifications: Direction: Up-Cut (D) Diameter: 3/16 (B) Cutting Height: 3/8 (D) Shank: 1/4 Overall Length (L): 2 Flutes: 1 Surface Coating: Zrn.
Advantages Of Zrn Coating: Creates Incredibly Precise Detail Work Optimized Flute Geometry And Low Total Indicated Runout (Tir) Guarantees Clean Cuts, Essentially Eliminates Sanding And Reduces Chatter When Used With Low Tir Spindles Creates A Harder And Tougher Cutting Ceramic Over Carbide Edge, Allowing For A Prolonged Cutting Edge Life And Helps To Prevent The Build-Up/Galling Of Material In The Flutes While Cutting Pvd Ceramic Hardcoat Designed For Soft, Gummy And Abrasive Materials High As.
Features
- Made in the USA
- Advantages of ZrN Coating: Creates incredibly precise detail work Optimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter when used with low TIR spindles Creates a harder and tougher cutting ceramic over carbide edge, allowing for a prolonged cutting edge life and helps to prevent the build-up/galling of material in the flutes while cutting PVD ceramic hardcoat designed for soft, gummy and abrasive materials High as
- SPECIFICATIONS: Direction: Up-Cut (D) Diameter: 3/16 (B) Cutting Height: 3/8 (d) Shank: 1/4 Overall Length (L): 2 Flutes: 1 Surface Coating: ZrN
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #3
Amana Tool - 51485 Solid Carbide CNC Spiral 'O' Single Flute, Aluminum Cutting 3/8 Dia x 1
Asin: B00IDEOPG0 | Model: 51485 | PartNumber: 51485 | Ean: 0738685514856 | UPC: 738685514856
(B) Cutting Height 1-1/8.
Overall Length (L) 3.
(D) Shank 3/8.
(D) Diameter 3/8.
Features
- Direction up-cut
- (D) diameter 3/8
- (B) Cutting height 1-1/8
- (D) shank 3/8
- Overall length (L) 3
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.00 pounds
See On Amazon #4
TEMO Black AITiN Coated M35 Cobalt Smooth Step Drill Spiral Flute, 12 Size from 3/16 Inch to 7/8 Inch, 1/4 Inch Hex Shank
Asin: B0CWTXYJXY | Ean: 0810091960905 | UPC: 810091960905
Double Spiral Flutes For More Efficient Swarf Clearance; 1/4 Inch Hex Shank With Quick Release Slot To Eliminate Slipping. The Addition Of Cobalt Increases Heat Resistance. It Is Widely Used In Metal Manufacturing Because Of Its Ability To Resist Wear Over Conventional High Speed Steels, Allowing For Shorter Cycle Times In Production Environments Due To Higher Cutting Speeds Or From The Increase In Time Between Tool Changes. M35 Is Also Less Prone To Chipping When Used For Interrupted Cuts..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Aluminum Titanium Nitride (Altin) Is Normally Applied To Steels, Hardened Steels, And Stainless Steel Materials Where High Wear Resistance And Lubricity Are Needed. Altin Coating Provides Exceptional Oxidation Resistance And Extreme Hardness. That's Why This Coating Works Well In Very Demanding Cutting Tool Applications, Especially When Tools Are Being Pushed To The Max..
12 Hole Sizes: 3/16" (4.76Mm), 1/4" (6.35Mm), 5/16" (7.94Mm), 3/8" (9.52Mm), 7/16" (11.11Mm), 1/2" (12.7Mm), 9/16" (14.29Mm), 5/8" (15.88Mm), 11/16" (17.46Mm), 3/4" (19.05Mm), 13/16", 7/8" (22.22Mm) With 1/16" (1.59Mm) Increments. The Size Marks Are Stamped Next To Each Step For Easy Use..
Features
- Black AITiN Coated M35 Cobalt Smooth Step Drill Spiral Flute, 12 Size From 3/16 Inch To 7/8 Inch, 1/4 Inch Hex Shank
- 12 hole sizes: 3/16 (4.76mm), 1/4 (6.35mm), 5/16 (7.94mm), 3/8 (9.52mm), 7/16 (11.11mm), 1/2 (12.7mm), 9/16 (14.29mm), 5/8 (15.88mm), 11/16 (17.46mm), 3/4 (19.05mm), 13/16, 7/8 (22.22mm) with 1/16 (1.59mm) increments. The size marks are stamped next to each step for easy use.
- Double spiral flutes for more efficient swarf clearance; 1/4 Inch hex Shank with quick release slot to eliminate slipping. The addition of cobalt increases heat resistance. It is widely used in metal manufacturing because of its ability to resist wear over conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M35 is also less prone to chipping when used for interrupted cuts.
- Aluminum Titanium Nitride (AlTiN) is normally applied to steels, hardened steels, and stainless steel materials where high wear resistance and lubricity are needed. AlTiN coating provides exceptional oxidation resistance and extreme hardness. That's why this coating works well in very demanding cutting tool applications, especially when tools are being pushed to the max.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 1.25 x 4.25 x 1.25 Inches | Weight: 0.19 pounds
See On Amazon #5
10 pcs M35 Cobalt Steel Spiral Point Plug Taps, 5/16"-18 UNC, H3, 2 Flute, Bright (Uncoated) Finish
Asin: B0BW4S269F
M35 Cobalt Steel Alloy Contains 5% Cobalt And Provides Superior Hardness And Wear Resistance Compared To High-Speed Steel.
Individually Packaged In Solid Plastic Tubes; 10 Pieces Per Order.
Bright Finish Prevents The Edge Buildup That Commonly Occurs When Machining Nonferrous "Gummy" Materials Such As Aluminum.
0.318" Shank Diameter; 0.238" Square Size.
Features
- 5/16"-18 Thread Size; 1-1/16" Thread Length; 2 Flute
- 0.318 Shank Diameter; 0.238 Square Size
- M35 cobalt steel alloy contains 5% cobalt and provides superior hardness and wear resistance compared to high-speed steel
- Bright finish prevents the edge buildup that commonly occurs when machining nonferrous gummy materials such as aluminum
- Individually packaged in solid plastic tubes; 10 pieces per order
- See more on Amazon...
Brand: CME Tools | Manufacturer: CME Tools
See On Amazon #6
Ball Nose End Mills JESTUOUS Carbide Spiral Router Bits 2 Flute 1/8" Shank Dia. 3/8" Flute Length for Milling Metal Steels,5 Pieces
Asin: B0CLNY362M | Ean: 0792966784086 | UPC: 792966784086
Suitable Fo Milling,2 Spiral Flutes For Better Chip-Removing..
Those Endmill Bits Are Compatible With Cnc,Engraving Machines For Side Milling,Groove Milling,End Milling,Copying,Pocket Machining,Etc..
Good Performance In Metals,Such As Hardened Steels,Alloy Steels,Carbon Steel, Mould Steel,Copper And Other Type Metals,Leaves Good Finish..
Solid Carbide Material With Titanium Coating,Provides Better Cutting Performance And Long Bits Life..
Features
- Ball nose endmills with 1/8 inch shank diameter,1/8 inch flute diameter,3/8 inch flute length,1-1/2*R1.5 inches overall length.
- Solid carbide material with titanium coating,provides better cutting performance and long bits life.
- Suitable fo milling,2 spiral flutes for better chip-removing.
- Good performance in metals,such as hardened steels,alloy steels,carbon steel, mould steel,copper and other type metals,leaves good finish.
- Those endmill bits are compatible with cnc,engraving machines for side milling,groove milling,end milling,copying,pocket machining,etc.
- See more on Amazon...
Brand: JESTUOUS | Manufacturer: Tungsten technology inc
Weight: 0.09 pounds
See On Amazon #7
Amana Tool - HSS1644 High Speed Steel (HSS) Double Flute Spiral Aluminum Cutting 1/2 Dia x
Asin: B01MEF01MI | Model: HSS1644 | PartNumber: HSS1644 | Ean: 0738685416440 | UPC: 738685416440
Cutting Height (B): 1-1/4.
Overall Length (L): 3-1/4.
Shank (D): 1/2.
Diameter (D): 1/2.
Features
- Direction: up-cut
- Diameter (D): 1/2
- Cutting height (B): 1-1/4
- Shank (D): 1/2
- Overall length (L): 3-1/4
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.00 pounds
See On Amazon #8
Amana Tool 57353-Z SC Spiral O Single Flute Improved Surface Finish Aluminum Cutting 3/16 D x 1/2 CH x 1/4 SHK x 2 Inch Long Up-Cut ZrN Coated Router Bit withMirror Finish
Asin: B0CRSMGF1C | Ean: 0738685573532 | UPC: 738685573532
Creates A Harder And Tougher Cutting Ceramic Over Carbide Edge, Allowing For A Prolonged Cutting Edge Life And Helps To Prevent The Build-Up/Galling Of Material In The Flutes While Cutting.
High Aspect Ratio For Single Pass Deep-Reach Cutting.
Pvd Ceramic Hardcoat Designed For Soft, Gummy And Abrasive Materials.
Optimized Flute Geometry And Low Total Indicated Runout (Tir) Guarantees Clean Cuts, Essentially Eliminates Sanding And Reduces Chatter When Used With Low Tir Spindles.
Features
- Creates incredibly precise detail work
- Optimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter when used with low TIR spindles
- Creates a harder and tougher cutting ceramic over carbide edge, allowing for a prolonged cutting edge life and helps to prevent the build-up/galling of material in the flutes while cutting
- PVD ceramic hardcoat designed for soft, gummy and abrasive materials
- High aspect ratio for single pass deep-reach cutting
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #9
Amana Tool 51673 SC Spiral for Steel, Stainless Steel & Non Ferrous Metal with AlTiN Coating 2-Flute x 1/16 D x 3/16 CH x 1/8 SHK x 1-1/2 Inch Long Up-Cut Router Bit / 45 Deg Corner Chamfer End Mill
Asin: B097F58JHW | Ean: 0738685516737 | UPC: 738685516737
Specifications: (D) Diameter: 1/8 (B) Cutting Height: 3/8 (D) Shank: 1/4 Overall Length (L): 1-1/2 Max Rpm: 28,000 Flutes: 3.
Features
- AlTiN coating has many benefits: Extra wear resistance Allows for faster feed and speed rates Cutting edge protected from wear Better chip evacuation Less heat build up Superior cutting quality and extended tool life
- SPECIFICATIONS: (D) Diameter: 1/8 (B) Cutting Height: 3/8 (d) Shank: 1/4 Overall Length (L): 1-1/2 Max RPM: 28,000 Flutes: 3
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.02 pounds
See On Amazon #10
Amana Tool - 57302 Metric Solid Carbide CNC Spiral 'O' Single Flute, Aluminum Cutting 3 Di
Asin: B01M63VVOW | Model: 57302 | PartNumber: 57302 | Ean: 0738685573020 | UPC: 738685573020
(B) Cutting Height: 12Mm.
Overall Length (L): 64Mm.
(D) Shank: 6Mm.
(D) Diameter: 3Mm.
Features
- Direction: up-cut
- (D) diameter: 3mm
- (B) Cutting height: 12mm
- (D) shank: 6mm
- Overall length (L): 64mm
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #11
Amana Tool - 51429 Solid Carbide CNC Spiral 'O' Single Flute, Plastic Cutting 3/8 Dia x 5
Asin: B017IIT67Y | Model: 51429 | PartNumber: 51429 | Ean: 0738685514290 | UPC: 738685514290
(B) Cutting Height 5/8.
Overall Length (L) 2-1/2.
(D) Shank 3/8.
(D) Diameter 3/8.
Features
- Direction up-cut
- (D) diameter 3/8
- (B) Cutting height 5/8
- (D) shank 3/8
- Overall length (L) 2-1/2
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.00 pounds
See On Amazon #12
3 pcs M35 Cobalt Steel Spiral Point Plug Taps, M24 3 mm Metric Coarse, D7, 3 Flute, Bright (Uncoated) Finish
Asin: B0BW4T3WSD
M35 Cobalt Steel Alloy Contains 5% Cobalt And Provides Superior Hardness And Wear Resistance Compared To High-Speed Steel.
Individually Packaged In Solid Plastic Tubes; 3 Pieces Per Order.
Bright Finish Prevents The Edge Buildup That Commonly Occurs When Machining Nonferrous "Gummy" Materials Such As Aluminum.
19.27 Mm Shank Diameter; 14.45 Mm Square Size.
Features
- M24 3 mm Thread Size; 56 mm Thread Length; 3 Flute
- 19.27 mm Shank Diameter; 14.45 mm Square Size
- M35 cobalt steel alloy contains 5% cobalt and provides superior hardness and wear resistance compared to high-speed steel
- Bright finish prevents the edge buildup that commonly occurs when machining nonferrous gummy materials such as aluminum
- Individually packaged in solid plastic tubes; 3 pieces per order
- See more on Amazon...
Brand: CME Tools | Manufacturer: CME Tools
See On Amazon #13
COMOK 32mm Cutting Dia Spiral Flute HSS 1/2" Straight Shank Twist Drill Bit for Electric Drills
Asin: B07GTCR3MH | Ean: 7448314668654
Shank Diameter:13Mm/1/2";Drilling Diameter:32Mm/1.25".
Package Content:1 X Twist Drill Bit.
Material:Hss;Color:Black;Net Weight:439G.
Total Length:150Mm/6";Flute Length:78Mm/3.1".
Features
- Product Name:Twist Drill Bit
- Total Length:150mm/6;Flute Length:78mm/3.1
- Shank Diameter:13mm/1/2;Drilling Diameter:32mm/1.25
- Material:HSS;Color:Black;Net Weight:439g
- Package Content:1 x Twist Drill Bit
- See more on Amazon...
Brand: COMOK | Manufacturer: COMOK
Weight: 0.00 pounds
See On Amazon #14
uxcell 2mm Drilling Dia 49mm Long M35 HSS Cobalt Spiral Flute Twist Drill Bits 5pcs
Asin: B078HXQGFD
Material: M35/Hss Cobalt; Flute Length: 23Mm/0.9".
Color: Champagne Color.
Bit Diameter: 2Mm/0.08"; Weight: 6G.
Product Name: Twist Drill Bit; Package Content: 5Pcs X Twist Drill Bit.
Features
- Total Length: 49mm/1.9"; Shank Diameter: 2mm/0.08"
- Product Name: Twist Drill Bit; Package Content: 5pcs x Twist Drill Bit
- Material: M35/HSS Cobalt; Flute Length: 23mm/0.9
- Bit Diameter: 2mm/0.08; Weight: 6g
- Color: Champagne Color
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
Amana Tool - 57332 Metric Solid Carbide CNC Spiral 'O' Single Flute, Plastic Cutting 5 Dia
Asin: B01M30TTOS | Model: 57332 | PartNumber: 57332 | Ean: 0738685573327 | UPC: 738685573327
(B) Cutting Height: 16Mm.
Overall Length (L): 64Mm.
(D) Shank: 6Mm.
(D) Diameter: 5Mm.
Features
- Direction: down-cut
- (D) Diameter: 5mm
- (B) Cutting height: 16mm
- (d) Shank: 6mm
- Overall length (L): 64mm
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon
Looking For Something Else?
Search